sbc type x stuffing boxes - upcoglobal.com · sbc type "x" stuffing boxes. ... all sbe...
TRANSCRIPT
Engineering Services ConsultingSoftware TrainingOil Well Equipment
upcoglobal.com
SECTIONA PAGE1
SBC TYPE "X" STUFFING BOXES
All Type "X" Stuffing Boxes require Skinner Type "8" packing. This type packing has almost four times more life than a ring type packing,and is readily adjustable for the size. All SBe Stuffing Boxes have a bronze type bushing, and the bushing and the rubber packing arethe only parts necessary to change from one rod size to another. All threads are lathe cut between centers so the thread is parallel andconcentric with the bore of the stuffing box. SBe Stuffing Boxes are available for rod sizes 1-1/8, 1-1/4, 1-3/8. 1-1/2 and 1-3/4, and haveworking pressures of 1500 PSI. When ordering Type "X" Stuffing Boxes please state size and thread, and polished rod size.
r- \\
fiGURE 1WORKING PRESSURE 1500 PSI
TEST PRESSURE 2175 PSIHEIGHT ABOVE TEE 11"
sac TYPE "X" SINGLESBe Type "X" Single Packed Stuffing Boxes are designed for useon wells which do not require secondary packing, or they may beused in conjunction with a blowout preventer when it is necessaryto change the packing under pressure. These Single PackedStuffing Boxes are made with 2", 2 %" and 3" lower connections.
sac TYPE "X" CROSS ITWINsse Twin Packed Stuffing Boxes were designed for use where pressureconditions require the use of both sets of packing agaihst the polished rodto insure against leaking, or where packing has to b~ replaced on wellswhile under pressure. The top set of packing when e~tirelY used up, canbe replaced while the bottom set of packing is holding back the wellpressure. After the new set of packing in the top has been put in place the.bottorn set of packing is then released until further needed.
Approx.Weight
2" EUE 90 Ibs.2 Y2" ....•..•................. 90 Ihs.3" 90 Ibs.
For Parts, see Section A, Page 2.For Rubber Packing, see Section D.
Approx.Weight
2" 60 Ibs.2 Y2" ...•..................... 61 Ibs.3" 62Ibs.
FIGURESWORKING PRESSURE 1500 PSI
TEST PRESSURE 2175 PSIHEIGHT ABOVE TEE 14 %"
SKINNER BROS. COMPANY, INC.MANUFACTURERS OF OIL FIELD EQUIPMENT
Available Only Through Supply Stores8-1-09
SECTION A PAGE 2
SBC TYPE "X" STUFFING BOX PARTS LISTI
PartNumber
lXSlXT4X8LEX5X6X7X5THl5THl6LET15B16BFig.72A13BS18BFig. 4
Fig. 737
5T
Part
Figure 4TYPE "X"
Complete EndPlate Assembly
1XS
6 LET8LEX
1",'"~,"7X
7 ~,6X 1';"\. , 7
• 5X
18B vt~
,~
13BS
PARTS LISTApprox.Weight
Type "X" Single Body Only. . . . . . . . . . . .. . 36% Ibs.Type "X" Cross Twin Body Only. . . . . . . . .. . 51 Ibs.End Plate Only 4lbs.Type "X" End Plate Gasket (Lead Optional) *End Plate Rubber Packing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. *Follower Screw Washer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. *Follower Screw Lock Nut I. • • . • • • • • • • • • • • • • • • • • • . . .. *Follower Adjusting Screw I ' % lb.Handle Only 1 lb.Follower Adjusting Screw with Handle 1% Ibs.Follower Only .\ : % lb.Upper Insert Bronze Bushihg f 1% Ibs.Lower Insert Bronze Bushing % lb.Crown Wiper Ring (2W' 00 X Polished Rod Size ID) 'Is lb.Wiper Ring Cover 1%Fastener Screw and Washer for Wiper Ring Cover. . . . . . . . . . . . . . . . . . . . . .. *complete End Plate Assembly I
(Parts 4X, 5X, 6X, 7X, 6LET, 5TH1, 7 and 8 LEX) 6% Ibs.Rubber Packing "B" (Specify Rod Size) ..•. l 1 lb.End Plate Bolt and Nut (W' X 2") *
*Weight too meager to list.
8-1-09
SKINNER [BROS. COMPANY, INC.MANUFACTURERS OF OIL FIELD EQUIPMENT
Available Only Through Supply Stores
Figure 73I (2 per set)
16B. (not used
in Twin)
• 72A
"'-"'.
,- .
15B
Number Required(Single) (Twin)
11
2 42 42 42 42 42 42 42 42 41 111 11 12 2
2 41 28 16
USAAddress:
410 W Grand Parkway S 244
Katy, Texas 77494
Phones:
Office: 1-832-437-5193
Fax: 1-281-754-4981
ColombiaAddress:
Carrera 13A #89 -53 Oficina 303
Bogota, Colombia
Phones:
Office: 57-1610-2704
MexicoAddress:
Calle 2 de Enero #111
Poza Rica, Veracruz
Phones:
Office: 52-782-160-1301
VenezuelaAddress:
Calle 68#, Local #21-21
Maracaibo, Venezuela
Phones:
Office: 58-261-783-0228
Fax: 58-261-783-0060
Contact
upcoglobal.com