Scanned by CamScanner

Scanned by CamScanner

Scanned by CamScanner

Scanned by CamScanner

Scanned by CamScanner

Scanned by CamScanner

SnoPerticulars

Quantit

yUnit Rate Amount

1

Earth work in excavation in foundation, trenches

etc. including dressing of sides and ramming of

bottoms, including getting out the excavated

material, refilling after laying pipe/ foundation

and disposal of surplus excavated material at a lead

upto 50m suitable site as per direction of Engineer for

following depths, below natural ground / Road top

level. In hard rock (Blasting prohibited) Depth upto

1.5 m

1 Cum 689 689

2

Earth work in excavation by mechanical means (Hydraulic

Excavator)/ manual means in foundation trenches or drains

(not exceeding 1.5 m in width or 10 sqm on plan) including

dressing of sides and ramming of bottoms, lift upto 1.5 m,

including taking out the excavated soil and depositing and

refilling of jhiri with watering & ramming and disposal of

surplus excavated soil as directed with in a lead of 50 meter.

All kinds of soils

1 Cum 159 159

3

Providing and laying in position cement concrete including

curing compaction etc. of specified grade excluding the cost

of centering and shuttering All up to plinth level IS 456-

2000:1:4:8 (1Cement :4 Course Sand :8 Graded stone

aggregate 40 mm nominal size (Crusher Broken)

1 Cum 2755 2755

4

Random Rubble stone masonary for foundation and plinth

in Cement Sand Mortar above 30 Cm. thick wall IS 1597

(Part-I) 1992 in :Cement Mortar 1:4 (1-Cement:4-Sand).1 Cum 3122 3122

5

Supplying and fixing rough dressed stone sills, dassa,

coping, cornices sriwan, string courses etc. in cement

mortar 1:4 including pointing with admixture of pigment

matching with the stone shade :100 mm thick

1 Sqm 1575 1575

6Supply and fixing 7 to 10 cm. Soorsagar or equivalent stone

chaps in lime mortar or gypsum rough dressed more than

0.60 m. length

1 Sqm 284 284

7

Random Rubble stone masonary for superstructure above

plinth level one storey height above 30 Cm. thick walls IS

1597 (Part-I) 1992 in :Cement Mortar 1:6 (1-Cement:6-

Sand).

1 Cum 3464 3464

8

Supplying and fixing ashlar stone chhajja 5 to 7 cm. thick

all exposed surface fully fine dressed, weather dripped

includin 75x75mm. Cement bota (1:2:4) between chhajja &

wall (single piece upto 1:2m length) : White Ashlar two

line dressed

1 Sqm 896 896

9

Stone slab roofing on ground for with fine grained stone

slab from approved quarry with 150 mm top lime terracing

with Hemp, Methi, Lime, Sandla with Gur & Gugal (as per

JODHPUR PRACTICE) including ralthal, filling of joints

of parapet and slab on both sides in cement sand mortar 1:4

lime batta (gola) 75mmx75mm Sandla and ceiling plaster in

CM 1:4 with wire and nails etc. complete as per

specification for span. Above 2.00 mtr upto 2.50 metre.

1 Sqm 1117 1117

Based on pwd Bsr 2013

Name of Work :-- Development work in suthla shamshan at soorsagar Zone( Rate

contract )

JODHPUR NAGAR NIGAM

ESTIMATE

10

Supplying and fixing Soorsagar Bhura or Equivalent ashlar

sills, lintels and dassa, bearing, bed & top surface made

perfenctly even, jambs, skirting steps etc. rough dressed:

Upto 15 cm. thick

1 Cum 4475 4475

11Plaster on new surface on wall in cement sand mortar 1:4

including raking of joints etc. complete fine finish :25 mm

thick.

1 Sqm 204 204

12 Wall up to 30 Cm. and less thickness. 1 Cum 316 316

13Pillar masonry including bed plates as per specifications.

Bed plate to be paid separately.1 Cum 401 401

14

Extra for facing as per design and detailed specifications IS

1597 (Part-II) 1992 including additional cost of stones over

item No. 6.1 & 6.2 for : Course rubble facing First Sort.1 Sqm 322 322

15

Extra for facing as per design and detailed specifications IS

1597 (Part-II) 1992 including additional cost of stones over

item No. 6.1 & 6.2 foCourse rubble facing Second Sort.1 Sqm 227 227

16

Providing and fixing Ist quality standard White Ivory

Glazed Tiles ISI marked [IS:13753] of size 300mm x

200mm in walls, floors, steps, pillars etc. laid on a bed of

neat cement slurry finished with flush pointing in white

cement mixed with pigment to match the shade of tile

complete (excluding the cost of cement plaster).

1 Sqm 753 753

17

Providing and fixing Ist quality MAT finished ceremic tile

size 300x300mm confirming to IS : 13753 colour such as

white, grey, ivory, fume red brown in walls, floors, steps,

pillars etc. laid on a bed of neat cement slsurry including

nicely finished joints using water proof joint filler power

(Untile or Roffe make) and finishing with flush pointing in

white cement mixed with pigment to match the shade of tile

complete (excluding the cost of cement plaster).

1 Sqm 820 820

18

Providing & fixing steel glazed doors, windows and

ventilators shutters of standred rolled steel section joint

mitred and welded with steel 13x3mm lugs 10 Cm. long

embedded in cement concrete blocks 15x10x10 Cm. of

1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20

mm nominal size) or with wooden plugs and screws or rawl

plugs and screws or with fixing clips or with bolts and nuts

as required, including providing and fixing of plain glass

panes 4mm thick with copper glazing clips and special

metal-sash putty of approved make, or metal beading with

screws complete including priming coat of approved steel

primer, excluding the cost of metal beading and other

fittings except necessary hinges of pivots steel handles and

peg stay etc. as required. IS 1038-1983.Ventilator centre

1 Sqm 2201 2201

19

Supplying and fixing fixed wire gauge of 14 mesh x 24

gauge to the metal frame of rolled section by metal beading

20x3mm with suitable screw at not exceeding 150mm

distance.

1 Sqm 547 547

20Providing and fixing Square bars or other flat welded to

window, ventilators etc. 1 Kg 71 71

21

Providing & fixing MS sheet single leaf door shutters in

angle iron frame 35x35x5 mm suitablly diagonally braced

with 25x3mm flat ironabove and below lock rail of size

50x5 mm beading extra includingall fittings, as per

direction of engg. incharge but excluding coes of chokhats

including two coats of anti corrastie red oxide primer

panit.MS sheet 20 SWG

1 Sqm 2195 2195

22

Providing and fixing T-iron frames for doors, windows and

ventilators of mild steel Tee-sections, joints mitred and

welded with 15x3 mm lugs 10 Cm. long embedded in

cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-

Cement:3-coarse sand:6-graded stone aggregate 20 mm

nominal size) or with wooden plugs and screws or rawl

plugs and screws or with fixing clips or with bolts and nuts

as required including fixing of necessary butt hinges and

screws and applying a priming coat of approved steel

primer.

1 Kg 82 82

23

Cement concrete flooring grade 1:2:4 (1-Cement:2-Coarse

sand:4-graded stone aggregate) rounding off edges etc. but

excluding the cost of nosing of steps etc. complete IS 2571-

1970 :50 mm thick with 20 mm thick nominal size

aggregate.

1 Sqm 281 281

24Pointing on stone masonary in cement sand mortar 1:3 (1-

Cement:3-Sand) :Deep grooved pointing1 Sqm 105 105

25

Deep groove pointing on stone masonry in white cement

sand mortar (1:3) with colour pigment of approved shade

for all type of masonry incl. racking of joint as per

specification complete in all respect.

1 Sqm 144 144

26Finishing wall with water proofing cement paint of

approved brand and manufacture and or required shade to

give an even shade including all scaffolding: New work

(Three or more coats).

1 Sqm 71 71

27Painting with enamel paint of approved brand and

manufacture to give an even shade: Two or more coats on

new work.

1 Sqm 54 54

28

Providing and applying white cement based putty over

plastered surface to prepare the surface even and smooth

complete 1 Sqm 68 68

29

Providing and laying 20 to 25 mm size glazed tiles pieces

for rooof treatment having colour and shade as approved by

the Engineer incharge over 25 mm thick layer of cement

mortar mix 1:4 with application of cement slurry including

finishing of joints with ordinary cement and curing etc.

complete in all respect. Washing with acid.

1 Sqm 253 253

30

Structural steel work welded in built up sections, trusses

and framed work including cutting, hoisting, fixing in

position and applying a priming coat of approved steel

primer all complete above plinth level up to 4.5 Mtr. height

in R.S. Joists flats, tees, angles and channels.

1 Kg 81 81

31

Steel work in built up tubular trusses including cutting,

hoisting, fixing in position and applying a priming coat of

approved steel primer, welded and bolted including special

shaped washers etc. complete above plinth level up to

4.5Mtr. height IS 1161-1998.Hot finished welded type

tubes

1 Kg 103 103

32

Providing corrugated G.I. Sheet roofing fixed with G.I. J or

L hooks bolts and nuts 8mm diameter with bitumen and G.I.

limpet washers or with G.I. limpet washers filled with white

lead and including a coat of approved steel primer and two

coat of approved paint on over lapping of sheet complete

(upto a pitch of 600) & excluding the cost of purlins rafters

and truses, for class of sheet : 1.00 mm thick

1 Sqm 721 721

33Providing ridges or hips of width 600 mm overall with plain

GI sheet fixed with GI, J or L-hooks, bolts and nuts 8mm

dia GI limpet and bitumen washers complete :0.80 mm

thick sheet.

1 Mtr 474 474

34

Providing and fixing 150 mm wide 450 mm overall

semicircular plain GI sheet gutter with iron brackets

40mmx3mm size, bolts, nuts, and washers etc. including

making necessary connection with rain water pipes

complete.0.80 mm thick.

1 Mtr 407 407

35Painting with weather coat paint (Asin paint/ I.C.I./Berger

or eq. ISI make paint) two or more coat to give an even

shade on new work.

1 Sqm 54 54

36

Providing and laying Chequerred plain cement concrete

embossed specially manufactured non-slipping tiles of

approved make 20 mm thick laid on 20 mm thick bed of

cement mortar 1:6 jointed with neat cement slurry

complete.Add extra for chequerred coloured plain cement

concrete or specially manufactured non-slipping tiles of

approved make 20 mm thick

1 Sqm 413.7 413.7

37

Structural steel work in single section fixed without

connecting plate including cutting, hoisting, fixing in

position and applying a priming coat of approved steel

primer all complete above plinth level up to 4.5 mtr. height

in R.S. joist flats, tees, angles and channels.

1 KG 68 68

38

Supplying, erecting and fixing in position specified

precast RCC bench made of RCC grade M-30

consisting of 2 Nos. “L” shaped base support of

thickness 100 mm back height 1000mm, front height

450 mm, base width 420mm and 5 Nos. RCC

planks of size of 1500x100 x 50 mm and 1 Nos

RCC planks of 150x200x50mm including joining all

parts with galvanised nuts and bolts of suitable size.

All bolts to be sealed after assembly with nice finish

and appearance and level complete in all respect as

per direction of engineer in charge. Every bench

should have a manufacture„s logo of appropriate size

Engraved at suitable place.

1 Nos 7600 7600

39

Providing and laying in position cement concrete including

curing compaction etc. of specified grade excluding the cost

of centering and shuttering All up to plinth level IS 456-

2000:1:1.5:3 (1Cement :1.5 Course Sand :3 Graded stone

aggregate 20 mm nominal size

1 Cum 4066 4066

40Supply and fixing Jodhpur sand stone Machine cut Dash,

Coping,sill,lintel fixed in cement sand mortar 1:4 9 cm

(3.5") thick

1 Sqm 1734 1734

Total 43372.7

S.No. Item no Item Qty. Unit Rate In Rs. amount

19.1

Providing, lowering, laying in trenches, aligning, fixing in

position and jointing socketed rubber gasket type ISI

marked uPVC pipes of Class III (6 Kg/sqcm) suitable for

potable water with rubber ring joints (as per IS 4985-

2000) of following outer dia with all accessories

(excluding specials) complete including all material,

labour, hydraulic testing and commissioning as per

Technical Specifications and as per direction of

Engineer. 110 mm dia

19.1.2110 mm dia

16.00 mtr 273.00 4368

32.3

Cement plastering including T&P, scaffolding, material

and complete labpour, including cost of water, curing,

racking of joints etc. with 15mm cement plaster on the

rough side of single or half brick wall of mix :

32.3.2 1:6 (1 cement : 6 fine/ coarse sand)21.60

21.60 Sqm 192.00 4147

25.1

Random rubble masonry with hard stone in foundation

and plinth : Cement mortar 1:6 (1 cement : 6 coarse

sand)

Cement mortar 1:6 (1 cement : 6 coarse sand)

12.96 cum 3190.00 41342

Extra for random rubble masonry with hard stone in

superstructure above plinth level and upto two stories.

8.21

8.21 Cum 3812.00 31297

Extra for coursed rubble masonry with hard stone (first

or second sort) in superstructure above plinth level and

upto two stories.

8.21 Cum 607.00 4983

4 9.3

Providing and laying lean cement concrete 1:4:8 in Sub-

base over a prepared sub-grade with coarse and fine

aggregate conforming to IS: 383, the size of coarse

aggregate not exceeding 25 mm,aggregate cement ratio

not to exceed 15:1, aggregate gradation after blending to

be as per table 600-1, cement content not to be less

than 150 kg/ cum, optimum moisture content to be

determined during trial length construction, concrete

strength not to be less than 10 Mpa at 7 days, mixed in

concrete mixer, laid manualy,compacted with surface

vibrator, finishing and curing complete as per clause

601, 112 of MoRT&H specification including all

material,labour, machinery, lighting, guarding and

maintenance of diversion 17.82

9.00

4.80

4.00

35.62 Cum 2300.00 81926

30.26

40 mm thick fine dressed stone flooring over 20 mm

(average) thick base of cement mortar 1:5 ( 1cement : 5

coarse sand) with joints finished flush.

30.26.2 White sand stone 272.25 Sqm 585.00 159266

for stair 9.00 Sqm 585.00 5265

6 10.2

Providing and fixing 50 mm dia G.I. steel pipe railing in 3

rows duly painted on medium weight steel channels

(ISMC series) 100 mm x 50 mm, 1.2 metres high above

ground, 2 m centre to centre,complete as per approved

drawings including all material, labour.36.00 Mtr 2040.00 73440

JODHPUR MUNICIPAL CORPORATION, JODHPUR

Name of work: Development of at Malviya lohar samsan ghat in ward no 18.

3

BASED ON RUIDP BSR, 2017

1

25.2

2

5

29.26

Steel work welded in built up sections/ framed work

including cutting,hoisting, fixing in position and applying

a priming coat of approved steel primer using structural

steel etc. as required

.29.26.2

In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works. 2145.00 Kg 87.50 187688

32.5

Painting with synthetic enamel paint of approved brand

and

manufacture to give an even shade :

32.50.1 Two or more coats on new work 38.88 Sqm 69.00 2683

32.3Distempering with oil bound washable distemper of

approved brand and manufacture to give an even shade

32.30.1New work (two or more coats) over and including priming

coat with cement primer. 364.50 Sqm 86.00 31347

32.33Finishing walls with water proofing cement paint of

required shade :

32.33.1New work (Two or more coats applied @ 3.84 kg/10

sqm). 364.50 Sqm 55.50 20230

30.24

Kota stone slab flooring 25mm thick over 20 mm

(average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of

the slab including rubbing and polishing complete with

base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

30.24.2 Area of each slab 900 to 2000 sqcm90.00

stair14.40

40.00

144.40 Sqm 1020.00 147288

12 4.3

Earth filling with available surplus soil excavated from

foundations and taken only from outside of building

plinth in layers not exceeding 20cm in depth,

consolidating each deposited layer including ramming

and watering and consolidation with lead up to 50 m and

lift upto 1.5 m.(mines schrap , fachra. )43.20 Cum 98.00 4234

13 31.1

Providing corrugated G.S. sheet roofing including

vertical/ curved surface fixed with polymer coated J or L

hooks, bolts and nuts 8 mm diameter with bitumen and

G.I. limpet washers or with G.I. limpet washers filled with

white lead and including a coat of approved steel primer

and two coats of approved paint on overlapping of

sheets complete upto any pitch in horizontal/ vertical or

curved surfaces) excluding the cost of purlins, rafters

and trusses and including cutting to size and shape

wherever required.

31.1.11.00mm thick with zinc coating not less than 275gm/m²

144.00 Sqm 974.00 140256

9.1

Providing and fixing of precast concrete interlocking tiles

of desired shape of M 30 grade manufactured from fully

computerized automatic stationery hydraulic viebro

pressed machine and fully computerized automatic

batching plant of class A1/A2 as per BS 6717:2001. The

CC interlocking paving blocks be laid on average 50mm.

thick bed of coarse sand and the joint is to be filled with

fine sand. Laying procedure on compacted sub-base as

defined. Complete job is to be executed as per the

instruction of Engineer incharge. The rates to be

inclusive of all lead & Lifts etc. complete as per

specifications. Tensile splitting strength, abrasion and

braking load etc. as per BS 6717:2001, Grey cement

9.10.180mm thick

81.00 Sqm 578.00 46818

15 10.1

Providing and fixing precast cement concrete M-20

grade (Using mechanical Concrete Mixer) kerb stone top

and bottom width 115 and 165 mm respectively, 250 mm

high on 150 mm thick PCC M-10 grade foundation as

per design, including fixing at site as per clause 408 of

MoRT&H Specification including all material,

labour,machinery, lighting, guarding and maintenance of

diversion.54.00 mtr 254.00 13716

1000293

Say Rs 10.00 Lacs

7

8

9

11

10

14

Junior Engineer Assitant Engineer Executive Engineer

Nagar Nigam Jodhpur Nagar Nigam Jodhpur Nagar Nigam Jodhpur

Total

S.No. Item no Item Qty. Unit Rate In Rs. amount

19.1

Providing, lowering, laying in trenches, aligning, fixing in

position and jointing socketed rubber gasket type ISI

marked uPVC pipes of Class III (6 Kg/sqcm) suitable for

potable water with rubber ring joints (as per IS 4985-2000)

of following outer dia with all accessories (excluding

specials) complete including all material, labour, hydraulic

testing and commissioning as per Technical Specifications

and as per direction of Engineer. 110 mm dia

19.1.2110 mm dia

54.00 mtr 273.00 14742

32.3

Cement plastering including T&P, scaffolding, material and

complete labpour, including cost of water, curing, racking of

joints etc. with 15mm cement plaster on the rough side of

single or half brick wall of mix :

32.3.2 1:6 (1 cement : 6 fine/ coarse sand)288.00

288.00 Sqm 192.00 55296

25.1

Random rubble masonry with hard stone in foundation and

plinth : Cement mortar 1:6 (1 cement : 6 coarse sand)

Cement mortar 1:6 (1 cement : 6 coarse sand)

17.28 Cum 3190.00 55123

Extra for random rubble masonry with hard stone in

superstructure above plinth level and upto two stories.

40.13

40.13 Cum 3812.00 152976

Extra for coursed rubble masonry with hard stone (first or

second sort) in superstructure above plinth level and upto

two stories.

40.13 Cum 607.00 24359

9.3

Providing and laying lean cement concrete 1:4:8 in Sub-

base over a prepared sub-grade with coarse and fine

aggregate conforming to IS: 383, the size of coarse

aggregate not exceeding 25 mm,aggregate cement ratio

not to exceed 15:1, aggregate gradation after blending to

be as per table 600-1, cement content not to be less than

150 kg/ cum, optimum moisture content to be determined

during trial length construction, concrete strength not to be

less than 10 Mpa at 7 days, mixed in concrete mixer, laid

manualy,compacted with surface vibrator, finishing and

curing complete as per clause 601, 112 of MoRT&H

specification including all material,labour, machinery,

lighting, guarding and maintenance of diversion

4.32

2.70

4.05

11.07 Cum 2300.00 25461

27.19

Providing and fixing 1st quality MAT & GLOSSY finished

ceramic tiles colour such as standard white, grey, ivory,

fume, red brown,light green, light blue, and other light

shades with water absorbtion less than or equal to 0.08%

confirming to IS : 13753 & IS : 15622 in floor, steps etc laid

on bed on neat cement slury finished with flush pointing in

the white cement mixed with pigment to match the shade of

the tile complete (including the the cost of cement mortar

bed 1:4)

27.19.1 Size 250mm x 375mm27.00 Sqm 770.00 20790

29.14

Providing and fixing T-iron frames for doors, windows and

ventilators of mild steel Tee-sections, joints mitred and

welded with 15x3 mm lugs 10cm long embedded in cement

concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse

sand : 6 graded stone aggregate 20mm nominal size) or

with wooden plugs and screws or with dash fastener or rawl

plugs and screws or with fixing clips or with bolts and nuts

as require including fixing of necessary butt hinges and

screws and applying a priming coat of approved steel

primer

342.00 kg 71.00 24282

JODHPUR MUNICIPAL CORPORATION, JODHPUR

Name of work: Development work at prajapat samaz samsan ghat and other samsan ghat

in ward no 12.

3

5

BASED ON RUIDP BSR, 2017

1

25.2

6

2

4

Providing and fixing 1mm thick M.S. sheet door with frame

of 40x40x6mm angle iron and 3mm M.S. gusset plates at

the junctions and corners, all necessary fittings complete,

including applying a priming coat of approved steel primer.

D-2 6.48

6.48 Sqm 2790.00 18079

32.22

Pointing on stone work with cement mortar 1:3 (1 cement :

3 fine

sand) :

32.22.1 Flush/ Ruled/ Struck or weathered pointing28.80

28.80 Sqm 141.00 4061

29.12

Providing and fixing factory made ISI marked steel glazed

doors,windows and ventilators side /top /centre hung with

beading and all members such as F7D, F4B, K11 B and

K12 B etc. complete of standard rolled steel sections, joints

mitred and flash butt welded and sash bars tenoned and

rivetted with 15x3mm lugs, 10cm long,embedded in cement

concrete blocks 15x10x10cm of 1:3:6 (1cement : 3 coarse

sand : 6 graded stone aggregate 20mm nominal size) or

with wooden plugs and screws or rawl plugs and screws or

with fixing clips or with bolts and nuts as required, including

providing and fixing of hinges, pivots, float glass panes with

glazing clips and special metal sash putty of approved

make and a priming coat of approved steel primer

excluding the cost of metal beading and other fittings

except necessary hinges or pivots complete as per

approved design.

0.81

0.81 Sqm 3040.00 2462

29.26

Steel work welded in built up sections/ framed work

including cutting,hoisting, fixing in position and applying a

priming coat of approved steel primer using structural steel

etc. as required

.

29.26.2In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works. 330.00 Kg 87.50 28875

11 29.28

Providing and fixing GI wire gauge of average width of

aperture 1.56mm with wire of 0.45mm to existing steel

door, window shutter frames with necessary M.S. strip

beading 20x3mm with suitable screw at not exceeding

150mm distance etc. complete

. 1.62 Sqm 495.00 802

32.5

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :

32.50.1 Two or more coats on new work 48.60 Sqm 69.00 3353

32.3Distempering with oil bound washable distemper of

approved brand and manufacture to give an even shade

32.30.1New work (two or more coats) over and including priming

coat with cement primer. 102.40 Sqm 86.00 8806

32.33Finishing walls with water proofing cement paint of required

shade :

32.33.1New work (Two or more coats applied @ 3.84 kg/10 sqm).

102.40 Sqm 55.50 5683

27.11

Providing and fixing 1st quality standard white, grey, ivory,

fume red brown, light green, light blue and other light

shades glazed tiles confirming to IS : 13753 & IS :15622 of

size 200mm x 300mm in walls, floors, steps, pillars etc. laid

on a bed of neat cement slurry finished with flush pointing

in the white cement mixed with pigment to match the shade

of the tile complete (excluding the cost of cement plaster on

walls and pillar).

204.80

204.80 Sqm 669.00 137011

27.12

Providing and fixing 1st quality MAT finished ceremic tile

size 300x300mm confirming to IS : 13755 and IS : 15622

colour such as white, grey, ivory, fume red brown, light

green, light blue and other light shades in floors, steps,

pillars etc. laid on a bed of neat cement slurry finished with

flush pointing in the white cement mixed with pigment to

match the shade of the tile complete (including the cost of

cement mortar bed 1:4)

.

9

10

12

13

8

7

16

14

15

11.52

11.52 Sqm 660.00 7603

34.7

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes,having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings i/c fixing

the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of

Engineer in Charge

34.7.1 15 mm nominal outer dia .Pipes. 24.00 mtr 171.00 4104

34.7.3 25 mm nominal outer dia .Pipes.18.00 mtr 288.00 5184

34.15 Providing and fixing brass bib cock of approved quality :

34.15 15 mm nominal bore 16.00 Each 215.00 3440

34.16 Providing and fixing brass stop cock of approved quality :

34.16.1 15 mm nominal bore 16.00 Each 240.00 3840

34.17

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) :

34.17.1 25 mm nominal bore4.00 Each 497.00 1988

21 34.47

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank ISI : 12701 marked with

cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but

without fittings and the base support for tank2000.00 p.ltr 6.50 13000

24.11

Half brick masonry with FPS brick of class designation 75

in

foundations and plinth in :

24.11.2 cement mortar 1:4 (1 cement : 4 coarse sand) 33.60 Sqm 472.00 15859

36.1.

Providing and fixing water closet squatting pan (Indian type

W.C.pan ) with 100mm sand cast Iron P or S trap, 10 litre

low level white P.V.C. flushing cistern with manually

controlled device (handle lever) conforming to IS : 7231,

with all fittings and fixtures complete including cutting and

making good the walls and floors wherever required :

36.1.1White Vitreous china Orissa pattern W.C. pan of size

580x440mm with integral type foot rests.2.00 Each 3570.00 7140

36.3

Providing and fixing white vitreous china pedestal type

water closet (European type) with seat and lid, 10 litre low

level white vitreous china flushing cistern & C.P. flush bend

with fittings & C.I. brackets,40mm flush bend, overflow

arrangement with specials of standard make and mosquito

proof coupling of approved municipal design complete

including painting of fittings and brackets, cutting and

making good the walls and floors wherever required

36.3.1 W.C. pan with ISI marked white solid plastic seat and lid.2.00 Each 4590.00 9180

36.7

Providing and fixing wash basin with C.I. brackets, 15 mm

C.P.brass pillar taps,32 mm C.P. brass waste of standard

pattern,including painting of fittings and brackets, cutting

and making good the walls wherever require :

36.7.2White Vitreous China Wash basin size 630x450 mm with a

single 15 mm C.P. brass pillar taps. 1.00 Each 1860.00 1860

36.18

Providing and fixing P.V.C. low level flushing cistern with

manually controlled device (handle lever) conforming to IS :

7231, with all fittings and fixtures complete.

36.18.1 10 litre capacity - White 2.00 Each 855.00 1710

36.28Providing and fixing P.V.C. waste pipe for sink or wash

basin including P.V.C. waste fittings complete.

36.28.2.

1

Flexible pipe 32 mm dia2.00 Each 53.50 107

36.73

Providing and fixing PTMT towel rail complete with brackets

fixed to wooden cleats with CP brass screws with

concealed fitting arrangement of approved quality and

colour.

36.73.1

450MM long towel rail with total length of 495mm, 78mm

wide and effective height of 88mm, weighing not less than

170gms. 8.00 Each 390.00 3120

30.24

Kota stone slab flooring 25mm thick over 20 mm (average)

thick base laid over and jointed with grey cement slurry

mixed with pigment to match the shade of the slab

including rubbing and polishing complete with base of

cement mortar 1 : 4 (1 cement : 4 coarse sand) :

30.24.2 Area of each slab 900 to 2000 sqcm27.00

27.00 Sqm 1020.00 27540

29

25

26

27

28

20

22

16

17

18

19

23

24

30 4.3

Earth filling with available surplus soil excavated from

foundations and taken only from outside of building plinth in

layers not exceeding 20cm in depth, consolidating each

deposited layer including ramming and watering and

consolidation with lead up to 50 m and lift upto 1.5

m.(mines schrap , fachra. )8.10 Cum 98.00 794

Earth work in excavation for roadway, including trimming

bottom and side slopes in accordance with requirement of

line, grades and cross sections, including disposal of

surplus material with all lift and lead upto 1000 metre as per

MoRT&H specification clause 301.

In all type of soil121.50 Cum 145.00 17618

Providing granular bedding having width = outer dia of pipe

(Bc) + 500mm, thickness below pipe = 0.25Bc or 100mm

(whichever is higher) and haunching = 0.5Bc, with graded

hard crusher broken stone of 100% passing through 20mm

sheive, 20 to 50 % passing through 10mm sheive and 100

% retain on 6.3mm sheive, laying in layers of thickness

10/15cm including ramming, consolidation etc complete for

all type of pipes of following sizes as per drawing and or as

directed by Engineer.

200 mm internal diameter150.00 mtr 133.00 19950

17.18

Providing at site, lowering & laying in trenches, aligning &

jointing of RCC pipes NP4 class (with s/s ends) IS: 458 -

2003 (amended up to date) marked and pipes from 300 mm

and upto 1800 mm manufactured through vertical casting

process at all depths with Rubber gaskets (EPDM/SBR) for

sewer lines as per IS: 5382 (including cost of Rubber

gaskets, lubricants) as per drawing, sectional hydro testing

of the sewer pipe line (including cost and conveyance of

water to site for testing) etc., complete as per specification

and / or as directed by Engineer.

200 mm internal diameter150.00 mtr 562.00 84300

34 9.3

Providing and laying lean cement concrete 1:4:8 in Sub-

base over a prepared sub-grade with coarse and fine

aggregate conforming to IS: 383, the size of coarse

aggregate not exceeding 25 mm,aggregate cement ratio

not to exceed 15:1, aggregate gradation after blending to

be as per table 600-1, cement content not to be less than

150 kg/ cum, optimum moisture content to be determined

during trial length construction, concrete strength not to be

less than 10 Mpa at 7 days, mixed in concrete mixer, laid

manualy,compacted with surface vibrator, finishing and

curing complete as per clause 601, 112 of MoRT&H

specification including all material,labour, machinery,

lighting, guarding and maintenance of diversion

13.50 Cum 2300.00 31050

9.5

Providing and laying un-reinforced, dowel jointed, plain

cement concrete mix With Concrete Mixer & vibrator

pavement over a prepared sub base with 43 grade cement ,

coarse and fine aggregate conforming to IS: 383, maximum

size of coarse aggregate not exceeding 25 mm, mixed as

per approved mix design, laid,spread, compacted and

finished in a continuous operation including provision of

contraction, expansion, construction and longitudina joints,

joint filler, separation membrane, sealant primer, joint

sealant, debonding strip, admixtures (if required) as

approved, curing compound, finishing to lines and grades

complete as per drawing and as per clause 602, 112 of

MoRT&H specification including all material, labour,

machinery, lighting, guarding and maintenance of diversion

PCC M 2013.50 Cum 4700.00 63450

4.2.131

35

32

33

36 17.39

Providing and constructing of RR stone masonry circular

manholes of "Type-A" with internal dia 0.90m and depth

upto 1.65m having 300mm thick RR stone masonry wall in

cement sand mortar 1:4,including concreting PCC M-10

grade (1:4:8) for 225mm thick foundation including curing

compaction and form work etc complete,PCC M15 for

benching and channel portion, RCC M20 for 200mm thick

cover slab including reinforcement, PCC M20 for fixing the

manhole frame and cover using stone aggregate 20mm

nominal size, 20mm thick inside and outside plaster in C.

M. 1:3, inside plaster finished with floating coat of neat

cement, vata in CM1:1 around pipe entering and leaving

the manhole and also at the junction of masonry and

concrete slab, providing and fixing of SFRC foot steps of

approved make at every 0.30m height fixed in CM

1:3,supplying and fixing heavy duty SFRC manhole frame

and cover as per IS 12592 (Part I and II) having clear

opening of 560mm,including refilling of Jhiri, including

curing, watering, ramming, hydro testing of manhole,

conveyance & cost of water, and dewatering complete as

directed by the Engineer

Note:- Excavation of earth work and road cutting for

manhole will be measured and paid separately.

Manhole "Type-A" of depth 0.90 m6.00 Each 12500.00 75000

37 1.1.1Carriage of Materials by mechanical transport including

loading,unloading and stacking : 5 km121.50 Cum 165.00 20048

1000046.00

Say Rs 10.00 Lacs

Junior Engineer Assitant Engineer Executive Engineer

Nagar Nigam Jodhpur Nagar Nigam Jodhpur Nagar Nigam Jodhpur

Total

Name of Work : -- okMZ 2 esa T;ksfr uxj pkan.kk Hkkdj mEesn lkxj ugj ds mij iSny vke jkLrs iqu% fuekZ.k dk;Z

Sno Particulars Quantity Unit Rate Amount

1

Earth work in excavation in foundation, trenches etc. including dressing of sides and

ramming of bottoms, including getting out the excavated material, refilling after laying

pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable

site as per direction of Engineer for following depths, below natural ground / Road top

level.In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil,

kankar, etc. Depth upto 1.5 m

16.20 Cum 159 2575.8

2Providing and laying R.R. stone kharanja in cement mortar 1:6

in one course :23 Cm. thick.60 Cum 367 22020

3

Structural steel work in single section fixed without connecting plate including cutting,

hoisting, fixing in position and applying a priming coat of approved steel primer all complete

above plinth level up to 4.5 mtr. height in R.S. joist flats, tees, angles and channels. 1456 Kg 68 99008

4

Providing and fixing steel gate grating and grills made of angles, tees, square bars or

other flats black pipe with holdfast and fittings complete as per design and drawing

including cutting welding and fabrication with priming coat of red oxide.200 Kg 89 17800

5

Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar

above 30 Cm. thick wall IS 1597 (Part-I) 1992 in :Cement Mortar 1:4 (1-Cement:4-

Sand).52.8 Cum 3122 164841.6

6Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including

additional cost of stones over item No. 6.1 & 6.2 for :Course rubble facing Second Sort. 88 Sqm 227 19976

7

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual

means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on

plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including

taking out the excavated soil and depositing and refilling of jhiri with watering &

ramming and disposal of surplus excavated soil as directed with in a lead of 50

meter. All kinds of soils

27 Cum 159 4293

8

Providing and laying in position cement concrete including curing compaction etc.

of specified grade excluding the cost of centering and shuttering All up to plinth

level IS 456-2000:1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm

nominal size (Crusher Broken)

20.7 Cum 2755 57028.5

9

Providing and fabricating reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding (including cost of binding wire) all

complete up to floor three level.Tremo Mechanically treated bars( TATA,

SAIL,VIZAC-RINL)

1320 Kg 70 92400

Based on PWD BSR

JODHPUR NAGAR NIGAM

ESTIMATE

10

Centering and shuttering with plywood or steel sheets including strutting, propping,

bracing both ways with wooden members and removal of formwork for

superstructure up to 4.5 mtr above plinth, for:Walls (any thickness) including

attached pilasters, buttresses, plinth and string course.44 Sqm 242 10648

11

Reinforced cement concrete work in walls (any thickness) including attached

pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,

abutments, posts and struts etc. up to floor three level including curing, compaction,

finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and

making good the joints excluding cost of centering shuttering and reinforcement IS

456-2000:1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm

nominal size).

6.6 Cum 4570 30162

12Supplying and fixing ashlar sills, jambs, skirting, steps etc. rough dressed:Upto 15

cm thick Red Ashlar 2.592 Cum 14910 38646.72

13Supplying and fixing dressed sand or other approved stone shelves, tands in cement

mortar 1:3 with fine dressed edges :75 mm thick 5.32 Sqm 1232 6554.24

14Pointing on stone masonary in cement sand mortar 1:3 (1-

Cement:3-Sand) :Deep grooved pointing44 Sqm 105 4620

15Plaster on new surface on wall in cement sand mortar 1:4

including raking of joints etc. complete fine finish :176 Sqm 204 35904

16

Providing and laying in position cement concrete including

curing compaction etc. of specified grade excluding the cost of

centering and shuttering All up to plinth level IS 456-

2000:1:1.5:3 (1Cement :1.5 Course Sand :3 Graded stone

aggregate 20 mm nominal size

4.8 Cum 4066 19516.8

total 625994.7

Perticulars Quantity Unit Rate Amount

1

Dismantling stone rubble masonry including stacking

of serviceable material and disposal of unserviceable

material within 50 meters lead.In Cement mortar.20 Cum 641 12820

2Demolishing cement concrete including disposal of

material within 50 meter lead :

A 1:3:6 or richer mix. 5.4 Cum 645 3483B 1:4:8 or leaner mix. 9 Cum 396 3564

3

Earth work in excavation by mechanical means

(Hydraulic Excavator)/ manual means in foundation

trenches or drains (not exceeding 1.5 m in width or 10

sqm on plan) including dressing of sides and ramming

of bottoms, lift upto 1.5 m, including taking out the

excavated soil and depositing and refilling of jhiri

with watering & ramming and disposal of surplus

excavated soil as directed with in a lead of 50 meter.

All kinds of soils

32.4 Cum 159 5151.6

4

Providing and laying in position cement concrete

including curing compaction etc. of specified grade

excluding the cost of centering and shuttering All up

to plinth level IS 456-2000:1:4:8 (1Cement :4 Course

Sand :8 Graded stone aggregate 40 mm nominal size

(Crusher Broken)

7.02 Cum 2755 19340.1

5

Random Rubble stone masonary for foundation and

plinth in Cement Sand Mortar above 30 Cm. thick

wall IS 1597 (Part-I) 1992 in :Cement Mortar 1:4 (1-

Cement:4-Sand).

30 Cum 3122 93660

6

Supply and fixing 7 to 10 cm. Soorsagar or equivalent

stone chaps in lime mortar or gypsum rough dressed

more than 0.60 m. length

30 Sqm 284 8520

7

Providing and fabricating reinforcement for R.C.C.

work including straightening, cutting, bending,

placing in position and binding (including cost of

binding wire) all complete up to floor three

level.Tremo Mechanically treated bars( TATA,

SAIL,VIZAC-RINL)

4784 KG 70 334880

8

Centering and shuttering with plywood or steel sheets

including strutting, propping, bracing both ways and

removal of formwork for foundations in basements

rafts, footings, strap beams, bases of columns , etc. up

to plinth level.

45 Sqm 123 5535

JODHPUR NAGAR NIGAMESTIMATE

Based pwd Bsr 2013

Name of Work :-- Development work in vargi amaj shamshan at pratap nagar road

9

Centering and shuttering with plywood or steel sheets

including strutting, propping, bracing both ways with

wooden members and removal of formwork for

superstructure up to 4.5 mtr above plinth, for:

AWalls (any thickness) including attached pilasters,

buttresses, plinth and string course.90 Sqm 242 21780

10

Suspended floors, roofs, landings, staircases,

balconies, girders, cantilevers, bands , coping, bed

plates, anchor blocks, sills, chhajjas lintel, beam etc.400 Sqm 266 106400

11

Providing and laying in position specified grade of

reinforced cement concrete including curing

compaction finishing with rendering in cement sand

mortar 1:3 (1-Cement:3-coarse sand) and making

good the joints excluding the cost of centering,

shuttering and reinforcement. All work up to plinth

level IS 456-2000:1:1:2 (1-Cement:1-Coarse sand:2-

graded stone aggregate 20 mm nominal size).

20 Cum 5002 100040

12

Reinforced cement concrete work in walls (any

thickness) including attached pilasters, buttresses,

plinth and string courses, fillets, columns, pillars,

piers, abutments, posts and struts etc. up to floor three

level including curing, compaction, finishing with

rendering in cement sand mortar 1:3 (1-Cement:3-

coarse sand) and making good the joints excluding

cost of centering shuttering and reinforcement IS 456-

2000:

10.0 Cum 4570 45700

A1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone

aggregate 20 mm nominal size).

13

Reinforced cement concrete work in beams,

suspended floors, roofs, girders having slopes up to

15o

, landings, balconies, shelves, chajjas, lintels,

bands, plain windows sills, staircases and spiral

staircases, up to floor three level including curing,

compaction, finishing with rendering in cement sand

mortar 1:3 (1-Cement:3-coarse sand) and making

good and joints excluding the cost of centering,

shuttering and reinforcement IS 456-2000:

33.8 Cum 4832 163080

14

Random Rubble stone masonary for superstructure

above plinth level one storey height above 30 Cm.

thick walls IS 1597 (Part-I) 1992 in :Cement Mortar

1:6 (1-Cement:6-Sand).

30.000 Cum 3464 103920

15 Wall up to 30 Cm. and less thickness. 30.000 Cum 316 9480Quantity same as above

16

Extra for facing as per design and detailed

specifications IS 1597 (Part-II) 1992 including

additional cost of stones over item No. 6.1 & 6.2 for :149.280 Sqm 322 48068.16

B Course rubble facing Second Sort. 298.560 Sqm 227 67773.12

17

Supplying and fixing Soorsagar Bhura or Equivalent

ashlar sills, lintels and dassa, bearing, bed & top

surface made perfenctly even, jambs, skirting steps

etc. rough dressed: Upto 15 cm. thick

1.404 Cum 4475 6282.9

18

Plaster on new surface on wall in cement sand mortar

1:4 including raking of joints etc. complete fine finish

:B 25 mm thick. 282.2 Sqm 204 57568.8

19Pillar masonry including bed plates as per

specifications. Bed plate to be paid separately.1.368 Cum 401 548.568

22

Providing & fixing steel glazed doors, windows and

ventilators shutters of standred rolled steel section

joint mitred and welded with steel 13x3mm lugs 10

Cm. long embedded in cement concrete blocks

15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-

graded stone aggregate 20 mm nominal size) or with

wooden plugs and screws or rawl plugs and screws or

with fixing clips or with bolts and nuts as required,

including providing and fixing of plain glass panes

4mm thick with copper glazing clips and special metal-

sash putty of approved make, or metal beading with

screws complete including priming coat of approved

steel primer, excluding the cost of metal beading and

other fittings except necessary hinges of pivots steel

handles and peg stay etc. as required. IS 1038-1983.

A Ventilator centre hung 6.48 Sqm 2201 14262.48

23

Supplying and fixing fixed wire gauge of 14 mesh x

24 gauge to the metal frame of rolled section by metal

beading 20x3mm with suitable screw at not exceeding

150mm distance.

6.48 Sqm 547 3544.56

24Providing and fixing Square bars or other flat welded

to window, ventilators etc.45 Kg 71 3195

25

Providing & fixing MS sheet single leaf door shutters

in angle iron frame 35x35x5 mm suitablly diagonally

braced with 25x3mm flat ironabove and below lock

rail of size 50x5 mm beading extra includingall

fittings, as per direction of engg. incharge but

excluding coes of chokhats including two coats of anti

corrastie red oxide primer panit.MS sheet 20 SWG

10.08 Sqm 2195 22125.6

26

Providing and fixing T-iron frames for doors,

windows and ventilators of mild steel Tee-sections,

joints mitred and welded with 15x3 mm lugs 10 Cm.

long embedded in cement concrete blocks 15x10x10

Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone

aggregate 20 mm nominal size) or with wooden plugs

and screws or rawl plugs and screws or with fixing

clips or with bolts and nuts as required including

fixing of necessary butt hinges and screws and

applying a priming coat of approved steel primer.

112 Kg 82 9184

27

Cement concrete flooring grade 1:2:4 (1-Cement:2-

Coarse sand:4-graded stone aggregate) rounding off

edges etc. but excluding the cost of nosing of steps

etc. complete IS 2571-1970 :50 mm thick with 20 mm

thick nominal size aggregate.

140 Sqm 281 39340

28

Pointing on stone masonary in cement sand mortar 1:3

(1-Cement:3-Sand) :Deep grooved pointing 176 Sqm 105 18480

29

Finishing wall with water proofing cement paint of

approved brand and manufacture and or required

shade to give an even shade including all scaffolding:

New work (Three or more coats).

201.6 Sqm 71 14313.6

30

Painting with enamel paint of approved brand and

manufacture to give an even shade: Two or more

coats on new work.

9.945 Sqm 54 537.03

31

Providing and applying white cement based putty

over plastered surface to prepare the surface even and

smooth complete

600 Sqm 68 40800

Rajnagar Ist quality with light spots.

Size upto 1501 to 3600 Cm2

100 Sqm 992 99200

Providing and fixing Granite stone slab mirror

polished and machine edge cut in Walls, Pillars,

Steps, Shelves, Sills, Counters. Floors etc. laid on

12mm (Av.) thick base of cement mortar 1:3 jointing

with white cement mortar 1:2 (1 white cement: 2

marble dust) with pigment to match the shade of the

marble slab complete including grinding, rubbing and

polishing of IS 3316-1974 :

100 Sqm 2207 220700

Size 1501 to 3600 Cm2

Total A 1703277.518

Eletrification

1

Wiring of light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq. mm nominal size FR PVC

insulated unsheathed flexible copper conductor 1.1

kV grade and 1.5 sq. mm nominal size FR PVC

insulated unsheathed flexible copper earth conductor

1.1 kV grade (IS:694) of approved make in surface /

recessed ISI marked MMS ( IS:9537 P - III )

PVC conduit & it's accessories, round tiles,18 SWG

M.S. box with earth terminal, 6 A switch, 3.0 mm

thick ISI marked phenolic laminated sheet, zinc plated

/ brass screws, cup washers, making connections,

testing etc. as required.

AShort point (up to 3 mtr.)

8P.

point215.00 1720

2

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq.

mm nominal size FR PVC insulated unsheathed

flexible copper conductor 1.1 kV grade and 1.5 sq.

mm nominal size FR PVC insulated unsheathed

flexible copper earth conductor 1.1 kV grade(IS:694)

of approved make in surface / recessed ISI marked

MMS ( IS:9537 P - III ) PVC conduit & it's

accessories, 18 SWG 175 mm x 100 mm x 60 mm

M.S. box with earth terminal, 6 A switch, 6 A

socket, 3.0 mm thick ISI marked phenolic laminated

sheet, zinc plated / brass screws, cup washers,

making connections, testing etc. as required.

AOn board

4P.

point90.00 360

32

3

S&F following sizes (dia.) of ISI marked medium

duty PVC conduit along with accessories in surface /

recessed using saddles, clamps, fastener as required

including cutting the wall, covering conduit and

making good the same as required.

A20 mm

50 Mtr 32.00 1600

4

Supplying and drawing FR PVC insulated &

unsheathed flexible copper conductor ISI marked

(IS:694) of 1.1 kV grade and approved make in

existing surface or recessed conduit/casing capping

including making connections etc. as required.

A1x 1.5 sq.mm

100 Mtr 14.00 1400

52 x 2.5 sq. mm. + 1x1.5sqmm

100 Mtr 53.00 5300

6

P&F 240/415 V isolator conforming to IS:13947-III/

IEC 60947-3 on existing board / sheet including

making connections, testing etc. as required.Double

pole isolator 30 A / 40 A rating

4 Each 298.00 1192

7P & F following size mounting grid plates with cover

plates

A5/6 Module

8 Each 109.00 872

8

P & F surface/recessed type 10 mm thick Teak wood

board duly antitermite treated, varnished and fixed by

using gutties/ PVC fasteners of following size as

required

A.450 mm x 600 mm

2 Each 87 174

B 100 mm x 100 mm 6 Each 14 84Total

B12702

Sanitary

1

P & F European type white glazed vitreous china Ist

quality W.C. pan (IS:2556 Mark) with P or S trap

including cutting and making good the wall and floor.2 Nos 1489 2978

2

P & F water closet Seat Covers with brass hinges

complete IS 2548-1996 :Solid PVC (ISI marked)

grade-I coloured for EWC.

2 Nos 409 818

3 P&F C.P. lugs for toilet seat cover 2 Pair 82 164

4

P & F Ist

quality WVC Urinal (IS:2556 mark) with 25

mm dia G.I. waste pipe, dome couplings, concealed

iron brackets or screws etc. complete.Flat Back

(small) size 440x265x315 mm.

4 Each 820 3280

6

P & F Low level Flushing Cistern of 10 litres capacity

(IS:2556 mark) of approved make with complete

fittings C.I. brackets duly painted, brass ball cock

with ball, (IS:1703 mark) complete including cutting

and making good the wall : PVC with PVC bend as

per IS : 7231

2 Each 1272 2544

7

P & F WVC Wash basin (Ist quality IS:2556 Mark) of

approved make with C.I. brackets duly painted 1 No.

15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm

C.P. brass waste coupling of approved make 25 mm

G.I. waste pipe complete including cutting & making

good the wall Size 510 mm x 400 mm

2 Each 1201 2402

9

P&F Grating of approved quality/ make Stainless

steel sheet Heavy quality of approved make 125mm 8 Each 67 536

10P&F Jet spray for water closet with C.P. copper tube

flange of approved make2 Each 293 586

11

P & F G.I. Pipes (Internal work) with G.I. fittings

(IS:1239 Mark) & M.S. clamps including cutting and

making good the walls and floors :Exposed on wall0 0

A 15 mm dia nominal bore. 40 Each 187 7480B 25 mm dia nominal bore. 60 Each 288 17280

12

P & F Pillar Cocks (IS:8934 Mark) of superior quality

and approved make :C.P. Pillar cock Elbow action, 15

mm nominal bore.

2 Each 688 1376

13

P & F Bib Cock (IS:8931 Mark) Superior quality of

approved make :C.P. Brass bib cock, 15 mm nominal

bore.

16 Each 470 7520

14

P & F Stop cock (IS:8931 Mark) superior quality &

of approved make :C.P. Brass 15 mm nominal bore. 12 Each 470 5640

15P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C.

Ball complete :Brass wt. 750 gm, 20 mm.4 Each 514 2056

16

P & F Inlet Connection (Angle Valves) Superior

quality, of approved make, for Wash basin, Gyser etc.

-do- with 37 Cm. long thread and nut.

8 Each 471 3768

17

P & F 15 mm. Dia Connection pipe of approved

quality/make:PVC pipe with C.P. Brass nuts up to

length 600mm.

4 Each 61 244

18

P & F Full-way valve (IS:778 Mark) or wheel valve

of approved make :Gun-metal 25 mm nominal bore. 2 Each 404 808

19

P & F PVC Storage Tank (IS:12701 marked

indicating the BIS license No.) of approved make

with cover, 25 mm dia 1 M long G.I. over-flow pipe

& 25 Cm. long wash out pipe with plug & socket,

including making connection etc. complete of

approved design.500 litres capacity.

4 Each 3450 13800

20

P & F Square-mouth gully trap `A` grade (IS :marked)

of approved make complete with C.I. grating, frame &

Cover masonary chamber in C.M. 1:6, 100mm thick

C.C. 1:5:10 base concrete, 40mm thick C.C.M-15

grade coping, 12mm thick cement plaster in CM 1:3

complete as per approved design & type.Trap size

225 X 150 mm, 15 Kg. C.I. cover with frame Internal

Chamber size 450 X 450mm.

4 Each 972 3888

21

Providing and fixing unplasticized Poly Vinyl

Chloride (UPVC) SWR pipes type `B' for sciland

waste dischareg system (IS : 13592: 1992 marked) of

approved quality/ make.110mm dia

24 Mtr 398 9552

22

Providing and fixing unplasticized Poly Vinyl

Chloride (UPVC) SWR pipes type `B' for sciland

waste dischareg system (IS : 13592: 1992 marked) of

approved quality/ make.

0

A Bend 87.5 Dg. 4 Each 159 636B Single `Y' 4 Each 284 1136

C Single Tee with Door2 Each 250 500

D Multi Floor Trap4 Each 248 992

89984Total

A=B+C1805963.518

Sno Particulars Quantity Unit Rate Amount

PART A Construction of toilet

Sno Perticulars Quantity Unit Rate Amount

1

Earth work in excavation by mechanical means

(Hydraulic Excavator)/ manual means in foundation

trenches or drains (not exceeding 1.5 m in width or 10

sqm on plan) including dressing of sides and ramming

of bottoms, lift upto 1.5 m, including taking out the

excavated soil and depositing and refilling of jhiri

with watering & ramming and disposal of surplus

excavated soil as directed with in a lead of 50 meter.

All kinds of soils

19.65 159 3124.589

F/ Back Wall

Short

Forv Plinth protection

2

Providing and laying in position cement concrete

including curing compaction etc. of specified grade

excluding the cost of centering and shuttering All up

to plinth level IS 456-2000:1:4:8 (1Cement :4 Course

Sand :8 Graded stone aggregate 40 mm nominal size

(Crusher Broken)

16.48 Cum 2755 45399.65

F/ Back Wall

Short

Forv Plinth protection

Steps

Out side Area

Under floor

Under floor

Other Work

3

Random Rubble stone masonary for foundation and

plinth in Cement Sand Mortar above 30 Cm. thick

wall IS 1597 (Part-I) 1992 in :Cement Mortar 1:4 (1-

Cement:4-Sand).

16.072 Cum 3122 50177.97

I st step F/ B

Short

II step

Short

III step

Short

Plinth protection

Based on pwd Bsr 2013

Name of Work :--DEVELOPMENT OF PARK IN FRONT OF MOTIKISHAN IN W. NO. 3

JODHPUR NAGAR NIGAM

4

Supplying and fixing rough dressed stone sills, dassa,

coping, cornices sriwan, string courses etc. in cement

mortar 1:4 including pointing with admixture of

pigment matching with the stone shade :100 mm thick

15.2 Sqm 1575 23940

For DPC & Roof bottam Bearing

5

Supply and fixing 7 to 10 cm. Soorsagar or equivalent

stone chaps in lime mortar or gypsum rough dressed

more than 0.60 m. length

24.0 Sqm 284 6816

For Partition wall

6

Random Rubble stone masonary for superstructure

above plinth level one storey height above 30 Cm.

thick walls IS 1597 (Part-I) 1992 in :Cement Mortar

1:6 (1-Cement:6-Sand).

16.452 Cum 3464 56989.73

Back Wall / Front

Perapet Wall

Total

Deduction Door

Ventilators

Total

Net

7

Supplying and fixing ashlar stone chhajja 5 to 7 cm.

thick all exposed surface fully fine dressed, weather

dripped includin 75x75mm. Cement bota (1:2:4)

between chhajja & wall (single piece upto 1:2m

length) : White Ashlar two line dressed

2.88 Sqm 896 2580.48

8

Stone slab roofing on ground for with fine grained

stone slab from approved quarry with 150 mm top

lime terracing with Hemp, Methi, Lime, Sandla with

Gur & Gugal (as per JODHPUR PRACTICE)

including ralthal, filling of joints of parapet and slab

on both sides in cement sand mortar 1:4 lime batta

(gola) 75mmx75mm Sandla and ceiling plaster in CM

1:4 with wire and nails etc. complete as per

specification for span. Above 2.00 mtr upto 2.50

metre.

23.100 Sqm 1117 25802.7

9

Supplying and fixing Soorsagar Bhura or Equivalent

ashlar sills, lintels and dassa, bearing, bed & top

surface made perfenctly even, jambs, skirting steps

etc. rough dressed: Upto 15 cm. thick

0.486 Cum 4475 2174.85

10

Plaster on new surface on wall in cement sand mortar

1:4 including raking of joints etc. complete fine finish

:

B 25 mm thick. 209.9 Sqm 204 42819.6

Roof

Inside parapet wall

Steps/ plinth protection

Other

Deduction

Total

11 Wall up to 30 Cm. and less thickness. 16.452 Cum 316 5198.832

12Pillar masonry including bed plates as per

specifications. Bed plate to be paid separately.1.368 Cum 401 548.568

13

Extra for facing as per design and detailed

specifications IS 1597 (Part-II) 1992 including

additional cost of stones over item No. 6.1 & 6.2 for :59.34 Sqm 322 19107.48

A Course rubble facing First Sort.

Deduction

D

Ventilators

Total

B Course rubble facing Second Sort. 66.09 Sqm 227 15002.43

Deduction

14

Providing and fixing Ist quality standard White Ivory

Glazed Tiles ISI marked [IS:13753] of size 300mm x

200mm in walls, floors, steps, pillars etc. laid on a

bed of neat cement slurry finished with flush pointing

in white cement mixed with pigment to match the

shade of tile complete (excluding the cost of cement

plaster).

46.62 Sqm 753 35104.86

Bath

Partition

Wc/ Urinals

Deductin

16

Providing and fixing Ist quality MAT finished

ceremic tile size 300x300mm confirming to IS :

13753 colour such as white, grey, ivory, fume red

brown in walls, floors, steps, pillars etc. laid on a bed

of neat cement slsurry including nicely finished joints

using water proof joint filler power (Untile or Roffe

make) and finishing with flush pointing in white

cement mixed with pigment to match the shade of tile

complete (excluding the cost of cement plaster).

14.64 Sqm 820 12004.8

Bath

Wc/ Urinals

17

Providing & fixing steel glazed doors, windows and

ventilators shutters of standred rolled steel section

joint mitred and welded with steel 13x3mm lugs 10

Cm. long embedded in cement concrete blocks

15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-

graded stone aggregate 20 mm nominal size) or with

wooden plugs and screws or rawl plugs and screws or

with fixing clips or with bolts and nuts as required,

including providing and fixing of plain glass panes

4mm thick with copper glazing clips and special metal-

sash putty of approved make, or metal beading with

screws complete including priming coat of approved

steel primer, excluding the cost of metal beading and

other fittings except necessary hinges of pivots steel

handles and peg stay etc. as required. IS 1038-1983.

A Ventilator centre hung 3.24 Sqm 2201 7131.24

18

Supplying and fixing fixed wire gauge of 14 mesh x

24 gauge to the metal frame of rolled section by metal

beading 20x3mm with suitable screw at not exceeding

150mm distance.3.24 Sqm 547 1772.28

19Providing and fixing Square bars or other flat welded

to window, ventilators etc.15 Kg 71 1065

20

Providing & fixing MS sheet single leaf door shutters

in angle iron frame 35x35x5 mm suitablly diagonally

braced with 25x3mm flat ironabove and below lock

rail of size 50x5 mm beading extra includingall

fittings, as per direction of engg. incharge but

excluding coes of chokhats including two coats of anti

corrastie red oxide primer panit.MS sheet 20 SWG

7.56 Sqm 2195 16594.2

21

Providing and fixing T-iron frames for doors,

windows and ventilators of mild steel Tee-sections,

joints mitred and welded with 15x3 mm lugs 10 Cm.

long embedded in cement concrete blocks 15x10x10

Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone

aggregate 20 mm nominal size) or with wooden plugs

and screws or rawl plugs and screws or with fixing

clips or with bolts and nuts as required including

fixing of necessary butt hinges and screws and

applying a priming coat of approved steel primer.

112 Kg 82 9184

22

Cement concrete flooring grade 1:2:4 (1-Cement:2-

Coarse sand:4-graded stone aggregate) rounding off

edges etc. but excluding the cost of nosing of steps

etc. complete IS 2571-1970 :50 mm thick with 20 mm

thick nominal size aggregate.

21.96 Sqm 281 6170.76

23

Pointing on stone masonary in cement sand mortar

1:3 (1-Cement:3-Sand) :Deep grooved pointing 68.25 Sqm 105 7166.25

24

Deep groove pointing on stone masonry in white

cement sand mortar (1:3) with colour pigment of

approved shade for all type of masonry incl. racking

of joint as per specification complete in all respect.

27.0 Sqm 144 3888

25

Finishing wall with water proofing cement paint of

approved brand and manufacture and or required

shade to give an even shade including all scaffolding:

New work (Three or more coats).

68.25 Sqm 71 4845.75

26

Painting with enamel paint of approved brand and

manufacture to give an even shade: Two or more

coats on new work.

9.945 Sqm 54 537.03

27

Providing and applying white cement based putty

over plastered surface to prepare the surface even and

smooth complete

50.0 Sqm 68 3400

28

Providing and laying 20 to 25 mm size glazed tiles

pieces for rooof treatment having colour and shade as

approved by the Engineer incharge over 25 mm thick

layer of cement mortar mix 1:4 with application of

cement slurry including finishing of joints with

ordinary cement and curing etc. complete in all

respect. Washing with acid.

Sqm

29

Wiring of light point/ fan point/ exhaust fan point/

call bell point with 1.5 sq. mm nominal size FR PVC

insulated unsheathed flexible copper conductor 1.1

kV grade and 1.5 sq. mm nominal size FR PVC

insulated unsheathed flexible copper earth conductor

1.1 kV grade (IS:694) of approved make in surface /

recessed ISI marked MMS ( IS:9537 P - III )

PVC conduit & it's accessories, round tiles,18 SWG

M.S. box with earth terminal, 6 A switch, 3.0 mm

thick ISI marked phenolic laminated sheet, zinc plated

/ brass screws, cup washers, making connections,

testing etc. as required.Short point (up to 3 mtr.)

8 P. point 215.00 1720

30

Wiring of 3 pin 5 amp. Light plug point with 1.5 sq.

mm nominal size FR PVC insulated unsheathed

flexible copper conductor 1.1 kV grade and 1.5 sq.

mm nominal size FR PVC insulated unsheathed

flexible copper earth conductor 1.1 kV grade(IS:694)

of approved make in surface / recessed ISI marked

MMS ( IS:9537 P - III ) PVC conduit & it's

accessories, 18 SWG 175 mm x 100 mm x 60 mm

M.S. box with earth terminal, 6 A switch, 6 A

socket, 3.0 mm thick ISI marked phenolic laminated

sheet, zinc plated / brass screws, cup washers,

making connections, testing etc. as required. On board

3 P. point 90.00 270

31

S&F following sizes (dia.) of ISI marked medium

duty PVC conduit along with accessories in surface /

recessed using saddles, clamps, fastener as required

including cutting the wall, covering conduit and

making good the same as required.20 mm

25 Mtr 32.00 800

32

Supplying and drawing FR PVC insulated &

unsheathed flexible copper conductor ISI marked

(IS:694) of 1.1 kV grade and approved make in

existing surface or recessed conduit/casing capping

including making connections etc. as required.

A 1x 1.5 sq.mm 0 Mtr 14.00 0

B 2 x 2.5 sq. mm. + 1x1.5sqmm 45 Mtr 53.00 2385

33

P&F 240/415 V isolator conforming to IS:13947-III/

IEC 60947-3 on existing board / sheet including

making connections, testing etc. as required.Double

pole isolator 30 A / 40 A rating

1 Each 298.00 298

34P & F following size mounting grid plates with cover

plates

A 5/6 Module 3 Each 109.00 327

35

P & F surface/recessed type 10 mm thick Teak wood

board duly antitermite treated, varnished and fixed by

using gutties/ PVC fasteners of following size as

required

A .450 mm x 600 mm 1 Each 87 87

B 100 mm x 100 mm 2 Each 14 28

36

P & F European type white glazed vitreous china Ist quality

W.C. pan (IS:2556 Mark) with P or S trap including cutting

and making good the wall and floor. 1 Nos 1489 1489

37P & F water closet Seat Covers with brass hinges

complete IS 2548-1996 :Solid PVC (ISI marked)

grade-I coloured for EWC.

1 Nos 409 409

38 P&F C.P. lugs for toilet seat cover 1 Pair 82 82

39

P & F Ist

quality WVC Urinal (IS:2556 mark) with 25 mm

dia G.I. waste pipe, dome couplings, concealed iron brackets

or screws etc. complete.Flat Back (small) size 440x265x315

mm.

1 Each 820 820

40

P & F Low level Flushing Cistern of 10 litres capacity

(IS:2556 mark) of approved make with complete fittings C.I.

brackets duly painted, brass ball cock with ball, (IS:1703

mark) complete including cutting and making good the wall

: PVC with PVC bend as per IS : 7231

1 Each 1272 1272

41

P & F WVC Wash basin (Ist quality IS:2556 Mark) of

approved make with C.I. brackets duly painted 1 No. 15 mm

C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste

coupling of approved make 25 mm G.I. waste pipe complete

including cutting & making good the wall Size 510 mm x

400 mm

1 Each 1201 1201

42P&F towel rail or ring of approved quality /make:C.P. brass

Towel rail elbow type with concealed screws size 450mm

(heavy duty)4 Each 396 1584

43P&F Grating of approved quality/ make Stainless steel sheet

Heavy quality of approved make 125mm 4 Each 67 268

44P&F Jet spray for water closet with C.P. copper tube

flange of approved make1 Each 293 293

45

P & F G.I. Pipes (Internal work) with G.I. fittings (IS:1239

Mark) & M.S. clamps including cutting and making good

the walls and floors :Exposed on wall 0 0

A 15 mm dia nominal bore. 20 Each 187 3740

B 25 mm dia nominal bore. 30 Each 288 8640

46

P & F Pillar Cocks (IS:8934 Mark) of superior quality and

approved make :C.P. Pillar cock Elbow action, 15 mm

nominal bore.1 Each 688 688

47

P & F Bib Cock (IS:8931 Mark) Superior quality of

approved make :C.P. Brass bib cock, 15 mm nominal bore. 6 Each 470 2820

48

P & F Stop cock (IS:8931 Mark) superior quality & of

approved make :C.P. Brass 15 mm nominal bore. 2 Each 470 940

49P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball

complete :Brass wt. 750 gm, 20 mm.1 Each 514 514

50

P & F Inlet Connection (Angle Valves) Superior quality, of

approved make, for Wash basin, Gyser etc. -do- with 37 Cm.

long thread and nut.8 Each 471 3768

51

P & F 15 mm. Dia Connection pipe of approved

quality/make:PVC pipe with C.P. Brass nuts up to length

600mm.2 Each 61 122

52

P & F Full-way valve (IS:778 Mark) or wheel valve of

approved make :Gun-metal 25 mm nominal bore. 2 Each 404 808

53

P & F PVC Storage Tank (IS:12701 marked indicating the

BIS license No.) of approved make with cover, 25 mm dia 1

M long G.I. over-flow pipe & 25 Cm. long wash out pipe

with plug & socket, including making connection etc.

complete of approved design.500 litres capacity.

2 Each 3450 6900

54

P & F Square-mouth gully trap `A` grade (IS :marked) of

approved make complete with C.I. grating, frame & Cover

masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10

base concrete, 40mm thick C.C.M-15 grade coping, 12mm

thick cement plaster in CM 1:3 complete as per approved

design & type.Trap size 225 X 150 mm, 15 Kg. C.I. cover

with frame Internal Chamber size 450 X 450mm.

2 Each 972 1944

55

Providing and fixing unplasticized Poly Vinyl

Chloride (UPVC) SWR pipes type `B' for sciland

waste dischareg system (IS : 13592: 1992 marked) of

approved quality/ make.110mm dia

6 Mtr 398 2388

56

Providing and fixing unplasticized Poly Vinyl Chloride

(UPVC) SWR pipes type `B' for sciland waste dischareg

system (IS : 13592: 1992 marked) of approved quality/

make.

0

A Bend 87.5 Dg. 2 Each 159 318

B Single `Y' 1 Each 284 284

C Single Tee with Door 1 Each 250 250

D Multi Floor Trap 2 Each 248 496

57

Structural steel work welded in built up sections,

trusses and framed work including cutting, hoisting,

fixing in position and applying a priming coat of

approved steel primer all complete above plinth level

up to 4.5 Mtr. height in R.S. Joists flats, tees, angles

and channels.

781.41 Kg 81 63294.21

58

Steel work in built up tubular trusses including

cutting, hoisting, fixing in position and applying a

priming coat of approved steel primer, welded and

bolted including special shaped washers etc. complete

above plinth level up to 4.5Mtr. height IS 1161-

1998.Hot finished welded type tubes

893.04 Kg 103 91983.12

59

Providing corrugated G.I. Sheet roofing fixed with

G.I. J or L hooks bolts and nuts 8mm diameter with

bitumen and G.I. limpet washers or with G.I. limpet

washers filled with white lead and including a coat of

approved steel primer and two coat of approved paint

on over lapping of sheet complete (upto a pitch of

600) & excluding the cost of purlins rafters and truses,

for class of sheet : 1.00 mm thick

139.08 Sqm 721 100276.7

60Providing ridges or hips of width 600 mm overall

with plain GI sheet fixed with GI, J or L-hooks, bolts

and nuts 8mm dia GI limpet and bitumen washers

complete :0.80 mm thick sheet.

12.2 Mtr 474 5782.8

61

Providing and fixing 150 mm wide 450 mm overall

semicircular plain GI sheet gutter with iron brackets

40mmx3mm size, bolts, nuts, and washers etc.

including making necessary connection with rain

water pipes complete.0.80 mm thick.

24.4 Mtr 407 9930.8

62Painting with weather coat paint (Asin paint/

I.C.I./Berger or eq. ISI make paint) two or more coat

to give an even shade on new work.

347.7 Sqm 54 18775.8

63

Providing and laying Chequerred plain cement

concrete embossed specially manufactured non-

slipping tiles of approved make 20 mm thick laid on

20 mm thick bed of cement mortar 1:6 jointed with

neat cement slurry complete.Add extra for chequerred

coloured plain cement concrete or specially

manufactured non-slipping tiles of approved make 20

mm thick

75 Sqm 413.7 31027.5

Total 777571