01 12 2009 Chart 1

SCHAKO Design Programme:Software use in 10 steps

Steigstraße 25-27 · D-78600 KolbingenTel.: +49(0)7463 980-0 · Fax: +49(0)7463 980-200 · E-Mail: info@schako.de · www.schako.com

QUIET ESTHETIC CLEAN SAFE PLEASANT

Licensing agreement

The selection programme „Schako“ helps the user with the dimensioning of our products. It does not replace the self dependent, ingenious design and solution of air-conditioning problems. The user is obligated in any case to check and ensure self dependently the compliance with standards, DIN, EN, VDI, regulations, etc.

Software use in 10 steps

Create a project for the dimensioning of several or different products

Create a project for the dimensioning of several or different products

Step 1 create a project

Software use in 10 steps

Select a product from the product overview or via search item

Step 2 select a product

Software use in 10 steps

Step 3 calculate a product

Enter Data, calculate, choose adequate diffuser sizeEnter Data, calculate, choose adequate diffuser size

Software use in 10 steps

Step 4 save technical data

Save the chosen product in a created project

Open product sheet

Copy onto clipboard

Save the chosen product in a created project

Open product sheet

Copy onto clipboard

Software use in 10 steps

Step 5 print and save technical data

Print from clipboard

Or copy into computer clipboard

Print from product sheet

Print from clipboard

Or copy into computer clipboard

Print from product sheet

Software use in 10 steps

Step 6 further dimensioning

Similar dimensioning of further products

Printing from the product sheet

Or add article to the created project

Similar dimensioning of further products

Printing from the product sheet

Or add article to the created project

Software use in 10 steps

Step 7 edit project list

Open project

Show articles of the project

Edit position, quantity, and prices

Open project

Show articles of the project

Edit position, quantity, and prices

Step 8 printing project data

Software use in 10 steps

Choose required printoutChoose required printout

Step 9 add files

Software use in 10 steps

Add documents, prospects or files to the project

Add documents, prospects or files to the project

Step 10 sending the project

Software use in 10 steps

Sending the project data by E-Mail

Sending the project data by E-Mail