Introducing AVAMO the fresh new brand name of the NTF Korfhage Maschinenbau GmbH, a 100 percent private, independent and ow-ner managed manufacturer of actuators and control solutions desi-gned for a variety of industrial applications.

Among the diverse industrial applications of AVAMO-Products are the oil and natural gas industry, the chemical and petro chemical industry and the power generating industry.

We offer competent and expert solutions based on decades of ex-perience in the production of actuators. Our experience, accompa-nied with advanced manufacturing technology and state of the art machines, results in the highest standard of production which enab-les us to offer, and provide, our widely diversified range of services.

• Scotch yoke actuators

• Rack & pinion actuators

• Linear actuators

• Control systems

AVAMOActutator technology - Made in Germany

2

We offer tailor made solutions for your projects!

The AVAMO Scotch Yoke Actuators were developed for both opening/closing or modulating operations. The design accommo-dates modular assembly and provides lasting durability with minimal service requirements.

AVAMOScotch Yoke Actuators

Feat

ures

Design: Symetric or canted scotch yoke lever

Control pressure actuator:

Pneumatic up to 12 barHydraulic up to 210 barNatural gas up to 200 bar

Torque: Up to 600.000 Nm

Temperatur range: -20°C to +100°C-40°C to +100°C-60°C to +80°C

Body: Maintenance free, corrosion protected, welded construction

Cylinder: Cylinder with nickel plated running surfaces against corrosion providing a long lifetime for gaskets

Versions: Single or double acting

End stops: Adjustable leak free end stops +/- 5°

Available options: Manual emergency overrideActuating time <0,5 SecondsSour gas service

Certification: • ATEX 94/9/EG• PED 2014/68/EU• TR-TS Approval• Applicable up to SIL 3 as per IEC 61508• Machine directives 2006/42/EG

3

AVAMO Rack & Pinion Actuators were developed for both opening/closing functions or modulating operations. The design accommo-dates modular assembly and provides lasting durability with minimal service requirements.

Design: Double-piston rack & pinion design

Control pressure actuator:

Pneumatic up to 12 barHydraulic up to 210 barNatural gas up to 200 bar

Torque: Up to 10.000 Nm

Temperatur range: -35°C to +80°c-55°C to +70°C

Body: Maintenance free, corrosion protected construction

Versions: Single or double acting

End stops: Adjustable leak free end stops +/- 5°

Available options: Manual emergency overrideActuating time <0,5 Seconds

Certification: • ATEX 94/9/EG• PED 2014/68/EU• TR-TS Approval• Applicable up to SIL 3 as per IEC 61508• Machine directives 2006/42/EG

Feat

ures

4

AVAMORack & Pinion Actuators

AVAMO Linear Actuators were developed for both Opening/Closing functions or modulating operations. The design accommodates modular assembly and provides lasting durability with minimal ser-vice requirements.

Design: Piston driven

Control pressure actuator:

Pneumatic up to 12 barHydraulic up to 210 barNatural gas up to 200 bar

Thrust: Up to 5.500.000 N

Temperatur range: -20°C to +100°c-40°C to +100°C-60°C to +80°C

Cylinder: Cylinder with nickel plated running surfaces against corrosion providing a long lifetime for gaskets

Versions: Single or double acting

Available options: Manual emergency overrideActuating time <0,5 SecondsAdjustable leak free end stops

Certification: • ATEX 94/9/EG• PED 2014/68/EU• TR-TS Approval• Applicable up to SIL 3 as per IEC 61508• Machine directives 2006/42/EG• TRD 421

Feat

ures

5

AVAMOLinear Actuators

In addition to the actuators AVAMO offers a wide variety of control units tailored to meet the customer’s specific needs. They are cha-racterized by their high quality standards’ and ease of maintenance.

We offer you:

• Pneumatic controls

• Gas controls

• Electrohydraulic controls

• Gas over oil controls

• Wellhead controls

• Solar systems

• Line break systems

• High- und low-pilots

• Steam test device

6

AVAMOControl Units

Consistent quality control is crucial in our branch. This is why our entire manufacturing process is constantly being monitored by our employees using state of the art measuring devices. All products are subjected to 100 percent control.

• DIN ISO 9001:2008

• Welding certificate

• Pressure equipment directives 2014/68/EU

• ATEX 94/9/EG

• SCC

Our experienced service technicians are available for a diverse variety of services worldwide:

• 24 hour standby

• On site installation and commissioning

• Spare parts management

• Servicing / Service contracts

• On-site training

• In house training in our own training center.

7

AVAMOQuality

AVAMOOur Service

Contact us at: service@avamo.eu

Nordring 1549328 Melle-BuerGermany

+49 (0)5427 9406 50

+49 (0)5427 9406 66

info@avamo.eu

www.avamo.eu

AVAMO is a brand of NTF Korfhage Maschinenbau GmbH