scott’s bolt in c-10 ifs instructions
TRANSCRIPT
![Page 1: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/1.jpg)
Scott’s Bolt in C-10 IFS Instructions
![Page 2: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/2.jpg)
Scott’s C-10 Bolt on IFS Instructions
Our Scott's suspension is based on a 2x4-inch, 3\16-wall crossmember. The unequal-length
A-arms are made from 1”1\8x¼-inch wall DOM tubing with stainless steel billet CNC-machined
rod ends. It is offered standard with manual rack and pinion, Aldan Eagle billet coilovers, (also
offered with Slam Specialties air bags and Monroe Shocks), 11-inch GM brakes (standard 5 on 4
½ and 5 on 4 ¾, however, there is a long list of options from which to choose: (NOTE** Built to
63 ¾ track unless otherwise requested by customer to be built to a non-narrowed track width **)
Polished Stainless Steel A-arms and Rod ends
Air suspension
Wilwood brakes (11-14-inch rotors with four- to six-piston calipers)
5 on 5, 5 on 5 ½, and 6 lug brake rotors
New power rack-and-pinion with lifetime warranty
Chrome Power rack
Ridetech coil-overs
Sway bar (polished stainless steel available)
Torsion style sway bar
Polished stainless steel tie-rod ends
Powdercoating
Motor mounts welded in place (SBC-BBC-LS and more)
![Page 3: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/3.jpg)
1. Here is a completed picture of what your Scotts Bolt-in IFS will look like fully installed.
1/20
![Page 4: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/4.jpg)
2. Scott's bolt-in front suspension system comes with everything required, including all the
fasteners in labeled bags.
2/20
![Page 5: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/5.jpg)
3. The day before disassembly begins every fastener you can reach should be sprayed with
penetrating oil. This is so they will come apart easily.
3/20
![Page 6: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/6.jpg)
4. With the front sheetmetal removed, unbolt the entire front suspension and lower it to the floor.
4/20
![Page 7: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/7.jpg)
5. Before you begin installation of the new IFS, we suggest that the frame be pressure washed,
then set on jackstands and leveled.
5/20
![Page 8: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/8.jpg)
6. Use a floor jack to raise the new crossmember into position. The inner frame reinforcements
(if you purchased Motor Mounts) have engine mounts already in place (there are a variety of
block brackets available to accommodate various engines).
6/20
![Page 9: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/9.jpg)
7. To secure the crossmember the only modification required is to enlarge the factory holes in the
tops of framerails to accept Scott's hardware.
7/20
![Page 10: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/10.jpg)
8. Like the original, the Scott's crossmember bolts to the tops, sides, and bottoms of the
framerails.
8/20
**NOTE** If you are installing a Scott’s 73-87 C-10 Bolt-in IFS the very top hole will need to
be drilled on your frame do to the stock hole location and where our crossmember sits , simply
locate and drill a 9/16 hole. **
![Page 11: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/11.jpg)
*** Fully tighten all side bolts to secure crossmember in place ***
** DO NOT FULLY TIGHTEN the Motor Mount Cradles as to leave adjustment while placing
motor in the vehicle**
9. With it bolted securely in place, you are ready to hang all the suspension parts.
9/20
![Page 12: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/12.jpg)
10. On each side, the upper A-frame attaches to the crossmember with a stainless steel clevis.
Note the spacers between the clevis and the crossmember.
10/20
![Page 13: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/13.jpg)
11. When adjusting caster and camber the number of spacers needed will increase or decrease as
the clevises screw into or out of the upper A-frames. Once the adjustments are made, the
attachment bolts are secured with setscrews.
11/20
![Page 14: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/14.jpg)
12. The lower A-frames include mounts for the Aldan coilovers (or air bags as well as the sway
bar links if ordered).
12/20
![Page 15: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/15.jpg)
13. Attaching the spindles is easy enough; however, the included thick washers must be used
under the nuts.
13/20
![Page 16: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/16.jpg)
14. The Aldan Eagle adjustable shocks have six valve damping positions. To increase firmness,
the adjusting knob is rotated clockwise; counterclockwise softens the damping.
14/20
![Page 17: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/17.jpg)
15. Once the spindles are in place the disc brake caliper brackets are bolted on.
15/20
![Page 18: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/18.jpg)
16. Scott's offers a variety of brake kits; 11-inch rotors with a 5 on 4½ or 5 on 4 3/4 inch bolt
pattern come standard.
16/20
![Page 19: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/19.jpg)
17. The standard kit includes GM single-piston calipers witch are effective and affordable and if
a replacement is ever needed they're as close as the nearest parts store.
17/20
![Page 20: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/20.jpg)
18. New holes will have to be drilled (if purchased) to attach the new sway bar's brackets to the
framerails.
18/20
![Page 21: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/21.jpg)
19. Urethane bushings (if purchased) are used in the sway bar's frame mounts and pairs of heim
joints attach it to the lower A-frames.
19/20
20. Installing Scott's bolt-in IFS should take a weekend from start to finish-and that includes
going to lunch, shooting the breeze with buddies, and looking for tools you just put down but
![Page 22: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/22.jpg)
couldn't find. Any questions about your install please call (805)485-0382
20/20 Scott's Hotrods and Customs
3421 Galaxy Place
Oxnard, CA 93030
805-485-0382
http://www.scottshotrods.com
![Page 23: Scott’s Bolt in C-10 IFS Instructions](https://reader034.vdocument.in/reader034/viewer/2022052521/628c7a651938af08c619551f/html5/thumbnails/23.jpg)