sebd0350, english performance handbook, edition 40, section 5 · edition 40 5-3 5 specifications...

CONTENTSFeatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-1Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .5-3416E:

Performance Data . . . . . . . . . . . . . . . . . . . . . .5-6Lift Capacities . . . . . . . . . . . . . . . . . . . . . . . . .5-8

420E/420E IT:Performance Data . . . . . . . . . . . . . . . . . . . . . .5-9Lift Capacities . . . . . . . . . . . . . . . . . . . . . . . .5-15

422E:Performance Data . . . . . . . . . . . . . . . . . . . . .5-16


430E/430E IT:Performance Data . . . . . . . . . . . . . . . . . . . . .5-21Lift Capacities . . . . . . . . . . . . . . . . . . . . . . . .5-27





450E:Performance Data . . . . . . . . . . . . . . . . . . . . .5-36Lift Capacities . . . . . . . . . . . . . . . . . . . . . . . .5-38

Backhoe Bucket Capacities . . . . . . . . . . . . . . .5-39Work Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-41

Features:● Center pivot backhoe — 416E, 420E, 430E,

450E.

● Side shift backhoe — 422E, 428E, 432E, 442E,444E.

● Single-tilt loader features divergent loaderarms, a narrow loader tower and single buckettilt cylinder for improved visibility.

● Integrated toolcarrier (parallel lift) loaderoffers maximum lift and breakout forces, diver-gent loader arms, and parallel lift for efficientloading and material handling.

– Hydraulic Quick Coupler provides versatil-ity and allows quick connection to selected worktools for the Cat family of integrated toolcarriers.

● Excavator-style backhoe provides enhancedvisibility even with narrow buckets, ability to reachover obstacles, and faster, easier truck loading.

– Backhoe Quick Coupler offerings include aconvenient “pin grabber” and versatile “pinpuller” for use with D/E-Series and competitivework tools.

● Load-sensing hydraulic system provides fullhydraulic power to implements at all enginespeeds, low fuel consumption, smooth control andlow lever efforts. A dual-setting torque limiterautomatically optimizes hydraulics.

BACKHOE LOADERS

Edition 40 5-1

5

Backhoe Loader Website for Dealers on Infocast offers latest, updated information.This comprehensive site contains all published and unpublished supporting materialsfor backhoe loaders in the North American Commercial Division.

https://nacd.cat.com/infocast/frames/products/bcp/bhlit/

● Pilot operated backhoe controls providesmooth, efficient operation and operator comfort.Not available on 416E, 422E, 428E. New thumbroller controllers provide ergonomic function ofthe extendible stick and/or auxiliary hydrauliccircuits. Convenient pattern changer switch iswithin the cab.

● Pilot operated stabilizer controls are standardon 420E, 430E, 432E, 442E, 444E, and 450E. Auto-up stabilizers are standard with the deluxe cab.

● The Cat 3054C DIT engine meets all U.S. EPATier 2/EU Stage II emissions requirements. Theefficient fuel system delivers reliable engine lugperformance. The transmission and new Cat axlesprovide increased roading speed. The 450E ispowered with the Cat C4.4 engine with ACERTtechnology.

● XT-3 ES hoses combined with Cat couplings andO-ring face seal fittings provide a dry, reliablemachine. The E Series backhoe circuits incorpo-rate the XT-3 ES ToughGuard hoses.

● Operator station features: Air-suspension seatis standard on all models. Adjustable tilt steeringis standard except on 416E and 422E. Rear, doorand side windows can be fully opened for enhancedventilation and cab roof is extended to help keepoperator dry. Four-post Rollover Protective Structure(ROPS) for increased protection. Fully featured, aDeluxe Cab option will feature pilot operated joy-stick controls, state-of-the-art control panels withwhite-faced gauges mounted in a rotating vandalcover, pilot operated stabilizer controls with auto-matic hold upon lifting, and additional systemmonitoring including service indicators for engineair cleaner, water-in-fuel, and hydraulic filter.

● High performance backhoe linkage offers 205°of bucket rotation with one pin position. New back-hoe geometry creates more stick force, brought closerto the operator to pull spoil through trench. The450E has a backhoe bucket rotation of 198°.

● Diagonal Retention System (DRS) standard onall factory installed buckets with weld-on toothadapters, excluding the 450E. Bucket teeth areattached with diagonal pins rather than horizontalpins for easy exchange of bucket teeth. 450E buck-ets remain fitted with J225 size, horizontal fastenerpins. All other buckets have bolt-on Uni-teeth.

● Integrated lift eye on backhoe linkage.

● Cat Cushion Swing system smooths the swingfunction, improving the return-to-trench control-lability.

● The extendible stick is redesigned to offerobject clamping while extending. Serrated edgessecure clamped objects. New wear pad configu-ration eases adjustment on all four sliding sur-faces. All sticks have thumb mounts.

● The hydraulic system uses load sensing, flowsharing valves with anti-drift characteristics.Smooth, multi-function operation with the abil-ity to have maximum lifting and digging forces atany RPM.

● Ride Control available as an option on all E-Series machines. The Ride-Control systemsmooths the ride under all job-site conditions.

● 4F/4R fully synchronized gear box provideson-the-go shifting in all gears and on-the-goengagement of optional all wheel drive. Maximum,level travel speed increased to 40 km/h (25 mph).

● Auto-Shift transmission is available as an optionon E-Series and is standard on 450E for operatorcomfort and efficiency.

● Brakes are oil immersed, multi-disc, self adjusting,and wear surface is made of Kevlar for long servicelife. Brakes are boosted on 420E, 430E and 450Emodels.

● All Wheel Drive is available as an option on allE-series machines, standard on the 430E and 450E.It improves mobility and loader performance inpoor traction conditions and can be engaged at anytime in any operating condition. Includes 4-wheelbraking effect feature.

● Sloping, flip-open hood allows excellent visi-bility to the loader working area and tilts forwardfor single location access to all daily service points.

● AccuGrade Grade Control Systems for BackhoeLoaders are entry level grade and depth checksystems that provide accuracy, productivity, loweroperating costs and enhanced profitability.

● Dry-type, radial seal air cleaner with automatic,integrated dust ejector system provides efficientpre-separation. The two-stage air filter incorpo-rates both air cleaner and pre-cleaner functionsinto a single unit mounted under the hood.

5-2 Edition 40

Backhoe Loaders Features

Edition 40 5-3

5

Backhoe LoadersSpecifications

MODEL 416E 420E/420E IT 422EGross Flywheel Power

SAE J1995 58 kW 78 hp 69 kW 93 hp 57 kW 76 hpISO 14396 56 kW 76 hp 68 kW 92 hp 57 kW 76 hp

Net Flywheel PowerSAE J1349 *55 kW* *74 hp* 66 kW 89 hp 55 kW 74 hpISO 9249 56 kW 75 hp 67 kW 90 hp *56 kW* *75 hp*EEC 80/1269 56 kW 75 hp 67 kW 90 hp *56 kW* *75 hp*

Operating Weight 6792 kg 14,960 lb 7025 kg 15,474 lb 7210 kg 15,895 lbEngine Model 3054C DINA 3054C DIT 3054C DINARated Engine RPM 2200 2200 2200No. of Cylinders 4 4 4Bore 105 mm 4.13 in 105 mm 4.13 in 105 mm 4.13 inStroke 127 mm 5 in 127 mm 5 in 127 mm 5 inDisplacement 4.4 L 268 in3 4.4 L 268 in3 4.4 L 268 in3

Speeds Forward (Power Shuttle) km/h mph km/h mph km/h mph1st 6.0 3.7 6.0 3.7 6.0 3.72nd 9.5 5.9 9.5 5.9 10.0 6.23rd 19.8 12.3 19.9 12.4 20.0 12.44th 39.9 24.8 40.1 24.9 40.0 24.8

Speeds Reverse (Power Shuttle)1st 6.0 3.7 6.0 3.7 6.0 3.72nd 9.5 5.9 9.5 5.9 10.0 6.23rd 19.8 12.3 19.9 12.4 20.0 12.44th 39.9 24.8 40.1 24.9 40.0 24.8

Speeds Forward (Auto-Shift)1st — 5.8 3.6 —2nd — 9.3 5.8 —3rd — 19.4 12.0 —4th — 26.6 16.5 —5th — 40.1 24.9 —

Speeds Reverse (Auto-Shift)1st — 5.8 3.6 —2nd — 12.3 7.6 —3rd — 26.7 16.6 —

Turning Circle, Wall to Wall 10.74 m 35'3" 10.84 m 35'7" 10.83 m 35'5"Turning Circle, Curb to Curb 8.16 m 26'9" 8.16 m 26'9" —Minimum Turning Circle, Curb to Curb 6.44 m 21'1" 6.44 m 21'1" —Tires

2WD Bias Front 11L-16 12 PR F-3 11L-16 12 PR F-3 12.5/80 x 18, 10 PR2WD Bias Rear 19.5L-24 12 PR R4 19.5L-24 12 PR R4 16.9 x 28, 10 PR

TiresAWD Bias Front 12.5/80-18 NHS 10 PR 12.5/80-18 NHS 10 PR 12.5/80 x 18, 10 PRAWD Bias Rear 19.5L-24 12 PR R4 19.5L-24 12 PR R4 16.9 x 28, 10 PR

TiresAWD Bias Front 12.5/80-18 NHS 10 PR 12.5/80-18 NHS 10 PR —AWD Bias Rear, Flotation 21L-24 16 PR 21L-24 16 PR —

TiresAWD Radial Front 335/80R18 XM37 335/80R18 XM37 340/80 x R18AWD Radial Rear 19.5L-R24 XM37 19.5L-R24 XM37 16.9 x R28

TiresAWD Combination Front 335/80R18 XM37 335/80R18 XM37 —AWD Combination Rear 19.5L-24 12 PR R4 19.5L-24 12 PR R4 —

Hydraulic System, Closed Center Load Sensing, Flow Sharing Load Sensing, Flow Sharing LSPCPump Capacity 132 L/min @ 163 L/min @ 125 L/min @

2200 rpm @ 22 700 kPa 2200 rpm @ 24 898 kPa 2200 rpm @ 22 700 kPa34.8 gpm @ 43 gpm @ 33 gpm @

2200 rpm @ 3292 psi 2200 rpm @ 3611 psi 2200 rpm @ 3292 psiFuel Tank Capacity 144 L 38 U.S. gal 144 L 38 U.S. gal 144 L 38 U.S. gal

*With optional turbocharger: 416E — SAE J1995 — 69 kW (93 hp).422E — SAE J1995 — 69 kW (94 hp).

MODEL 428E 430E/430E IT 432EGross Flywheel Power

SAE J1995 *69 kW* 92 hp 75 kW 101 hp *69 kW* 92 hpISO 14396 62 kW 83 hp 75 kW 100 hp 69 kW 92 hp

Net Flywheel PowerSAE J1349 *60 kW 80 hp 72 kW 97 hp 66 kW 89 hpISO 9249 *67 kW 89 hp 73 kW 98 hp 67 kW 89 hpEEC 80/1269 *67 kW 89 hp 73 kW 98 hp 67 kW 89 hp

Operating Weight 7570 kg 16,689 lb 7294 kg 16,066 lb 7780 kg 17,152 lbEngine Model 3054C DIT 3054C DIT 3054C DITRated Engine RPM 2200 2200 2200No. of Cylinders 4 4 4Bore 105 mm 4.13 in 105 mm 4.13 in 105 mm 4.13 inStroke 127 mm 5 in 127 mm 5 in 127 mm 5 inDisplacement 4.4 L 268 in3 4.4 L 268 in3 4.4 L 268 in3

Speeds Forward (Power Shuttle) km/h mph km/h mph km/h mph1st 6.0 3.7 5.9 3.7 6.0 3.72nd 10.0 6.2 9.7 6.0 10.0 6.23rd 20.0 12.4 20.0 12.3 20.0 12.44th 40.0 24.8 43.2 26.8 40.0 24.8

Speeds Reverse (Power Shuttle)1st 6.0 3.7 5.9 3.7 6.0 3.72nd 10.0 6.2 9.7 6.0 10.0 6.23rd 20.0 12.4 20.0 12.3 20.0 12.44th 40.0 24.8 43.2 26.8 40.0 24.8

Speeds Forward (Auto-Shift)1st — 5.8 3.6 6.0 3.72nd — 9.4 5.8 9.0 5.63rd — 19.6 12.2 20.0 12.44th — 27.1 16.8 27.0 16.75th — 41.3 25.8 41.0 25.4

Speeds Reverse (Auto-Shift)1st — 5.8 3.6 6.0 3.72nd — 12.3 7.6 9.0 5.63rd — 27.1 16.8 20.0 12.4

Turning Circle, Wall to Wall 10.80 m 35'4" 10.85 m 35'7" 10.80 m 35'5"Tires

2WD Bias Front — 11L-16 12 PR F-3 —2WD Bias Rear — 19.5L-24 12 PR R4 —

TiresAWD Bias Front 12.5/80 x 18, 10 PR 12.5/80-18 NHS 10 PR 12.5/80 x 18, 10 PRAWD Bias Rear 16.9 x 28, 10 PR 19.5L-24 12 PR R4 16.9 x 28, 10 PR

TiresAWD Bias Front — 12.5/80-18 NHS 10 PR —AWD Bias Rear, Flotation — 21L-24 16 PR —

TiresAWD Radial Front 340/80 x R18 335/80R18 XM37 340/80 x R18AWD Radial Rear 16.9 x R28 19.5L-R24 XM37 16.9 x R28

TiresAWD Combination Front — 335/80R18 XM37 —AWD Combination Rear — 19.5L-24 12 PR R4 —

Hydraulic System, Closed Center LSPC Load Sensing, Flow Sharing LSPCPump Capacity 125 L/min @ 163 L/min @ 156 L/min @

2200 rpm @ 22 700 kPa 2200 rpm @ 24 898 kPa 2200 rpm @ 24 900 kPa33 gpm @ 43 gpm @ 41 gpm @

2200 rpm @ 3292 psi 2200 rpm @ 3611 psi 2200 rpm @ 3611 psiFuel Tank Capacity 144 L 38 U.S. gal 144 L 38 U.S. gal 144 L 38 U.S. gal

*With optional turbocharger: 428E — SAE J1995 — 75 kW (102 hp).432E — SAE J1995 — 75 kW (102 hp).

5-4 Edition 40

Backhoe Loaders Specifications

Edition 40 5-5

5

Backhoe LoadersSpecifications● All Wheel Steer

MODEL 434E 442E 444E 450EGross Flywheel Power

SAE J1349 75 kW 100 hp 75 kW 100 hp 75 kW 100 hp 102 kW 137 hpISO 14396 — 75 kW 100 hp — 102 kW 137 hp

Net Flywheel PowerSAE J1349 — 72 kW 97 hp — 92 kW 124 hpISO 9249 73 kW 97 hp 73 kW 97 hp 73 kW 97 hp 93 kW 125 hpEEC 80/1269 73 kW 97 hp 73 kW 97 hp 73 kW 97 hp 93 kW 125 hp

Operating Weight 8370 kg 18,452 lb 7940 kg 17,504 lb 8810 kg 19,422 lb 10 950 kg 24,141 lbEngine Model 3054C DIT 3054C DIT 3054C DIT C4.4Rated Engine RPM 2200 2200 2200 2200No. of Cylinders 4 4 4 4Bore 105 mm 4.13 in 105 mm 4.13 in 105 mm 4.13 in 105 mm 4.13 inStroke 127 mm 5 in 127 mm 5 in 127 mm 5 in 127 mm 5 inDisplacement 4.4 L 268 in3 4.4 L 268 in3 4.4 L 268 in3 4.4 L 268 in3

Speeds Forward (Power Shuttle) km/h mph km/h mph km/h mph km/h mph1st 6.0 3.7 6.0 3.7 6.0 3.7 —2nd 9.0 5.5 10.0 6.2 10.0 6.2 —3rd 18.0 11.1 20.0 12.4 20.0 12.4 —4th 37.0 22.9 41.0 25.4 40.0 24.8 —

Speeds Reverse (Power Shuttle)1st 6.0 3.7 6.0 3.7 6.0 3.7 —2nd 9.0 5.5 10.0 6.2 10.0 6.2 —3rd 18.0 11.1 20.0 12.4 20.0 12.4 —4th 37.0 22.9 41.0 25.4 40.0 24.8 —

Speeds Forward (Auto-Shift)1st 5.0 3.1 6.0 3.7 6.0 3.7 6.0 3.72nd 9.0 5.5 10.0 6.2 9.0 5.5 9.5 5.93rd 18.0 11.1 20.0 12.4 20.0 12.4 19.8 12.34th 25.0 15.5 27.0 16.7 27.0 16.7 27.2 16.95th 38.0 23.6 42.0 26.0 41.0 25.4 40.1 24.9

Speeds Reverse (Auto-Shift)1st 5.0 3.1 6.0 3.7 6.0 3.7 6.0 3.72nd 9.0 5.5 10.0 6.2 9.0 5.5 12.5 7.83rd 18.0 11.1 20.0 12.4 20.0 12.4 27.3 17.0

Turning Circle, Wall to Wall 16.5 m 54'1" 10.8 m 35'4" 19.4 m 63'6" 11.18 m 36'8"All Wheel Steer, Wall to Wall

Two Wheel Steer 16.5 m 54'1" 10.8 m 35'4" 19.4 m 63'6" —Circle Steer 11.8 m 38'7" 9.3 m 30'5" 12.9 m 42'3" —Independent Rear 11.1 m 36'4" 9.2 m 30'1" 11.9 m 39'0" —

Tires, Single-Tilt, FrontStandard, AWD — — — 15 x 19.5, 12 PR, R4

Tires, Single-Tilt, RearStandard, 2WD/AWD — — — 21L-24 R4 18 PR

Tire, Parallel Lift, FrontStandard, AWD — 12.5/80 x 18, 10 PR — —Standard, AWD — 12.5/80 x 18, 10 PR — —

Tires, Parallel Lift, RearStandard, AWD/AWS — 16.9 x 28, 12 PR — —

Hydraulic System, Closed Center — LSPC — Load SensingPump Capacity 156 L/min @ 156 L/min @ 156 L/min @ 194 L/min @

2200 rpm @ 24 900 kPa 2200 rpm @ 24 900 kPa 2200 rpm @ 24 900 kPa 2200 rpm @ 26 200 kPa41 gpm @ 41 gpm @ 41 gpm @ 51.3 gpm @

2200 rpm @ 3611 psi 2200 rpm @ 3611 psi 2200 rpm @ 3611 psi 2200 rpm @ 3800 psiFuel Tank Capacity 187 L 49 U.S. gal 144 L 38 U.S. gal 187 L 49 U.S. gal 144 L 38 U.S. gal

Single-Tilt Loader

General Purpose General Purpose Multi PurposeMACHINE DIMENSIONS 0.76 m3 (1 yd3) 0.96 m3 (1.25 yd3) 1.0 m3 (1.3 yd3)

1) Overall transport length 7233 mm 23'9" 7321 mm 24'0" 7285 mm 23'11"Overall length 7180 mm 23'7" 7293 mm 23'11" 7209 mm 23'8"

2) Overall transport height 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9"Overall width 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0"

3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3"4) Height to top of exhaust stack 2754 mm 9'0" 2754 mm 9'0" 2754 mm 9'0"

Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" 320 mm 1'1"5) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10"

Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2"Rear wheel tread gauge 1727 mm 5'8" 1727 mm 5'8" 1727 mm 5'8"

6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3"

5-6 Edition 40

Backhoe Loaders Performance Data● 416E

Dimensions and performance specifications shownare for machines equipped with 11L x 16 (10 PR) fronttires, 19.5 x 24 (10 PR) rear tires, ROPS canopy, standard stick with 610 mm (24 in) standard dutybucket, and 0.76 m3 (1 yd3) loader bucket and standard equipment unless otherwise specified.

Single-Tilt Loader

Edition 40 5-7

5

Backhoe LoadersPerformance Data● 416E

Single-Tilt LoaderLOADER BUCKET DIMENSIONS General Purpose General Purpose Multi PurposeAND PERFORMANCE 0.76 m3 (1 yd3) 0.96 m3 (1.25 yd3) 1.0 m3 (1.3 yd3)

Capacity (SAE) rated 0.76 m3 1 yd3 0.96 m3 1.25 yd3 1.0 m3 1.3 yd3

Width 2262 mm 7'5" 2262 mm 7'5" 2262 mm 7'5"Lift capacity at maximum height 2547 kg 5615 lb 2427 kg 5351 lb 2225 kg 4905 lbBreakout force 40.9 kN 9185 lb 38.1 kN 8565 lb 37.2 kN 8363 lb

7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10"Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1"

8) Dump angle at full height 44° 44° 44°Dump height at maximum angle 2651 mm 8'8" 2573 mm 8'5" 2624 mm 8'7"

9) Dump reach at maximum angle 772 mm 2'6" 853 mm 2'6" 761 mm 2'6"10) Maximum bucket rollback at ground level 39° 39° 39°11) Digging depth 106 mm 4" 106 mm 4" 106 mm 4"

Maximum grading angle 110° 107° 110°Width of dozer cutting edge N/A N/A 2262 mm 7'5"

12) Grill to bucket cutting edge, carry position 1428 mm 4'8" 1516 mm 5'0" 1480 mm 4'10"13) Maximum operating height 4063 mm 13'4" 4063 mm 13'4" 4063 mm 13'4"

Jaw opening maximum N/A N/A 790 mm 2'7"Weight (does not include teeth or forks) 340 kg 750 lb 438 kg 967 lb 723 kg 1594 lb

BACKHOE DIMENSIONS Extendible Stick Extendible StickAND PERFORMANCE Standard Stick Retracted Extended

14) Digging depth, SAE (maximum) 4360 mm 14'4" 4402 mm 14'5" 5456 mm 17'11"15) Digging depth, 610 mm (2'0") flat bottom 4321 mm 14'2" 4363 mm 14'4" 5420 mm 17'10"

Reach from rear axle centerline at ground line 6721 mm 22'1" 6760 mm 22'2" 7769 mm 25'6"16) Reach from swing pivot at ground line 5618 mm 18'5" 5657 mm 18'7" 6666 mm 21'10"

Maximum operating height 5523 mm 18'1" 5555 mm 18'3" 6302 mm 20'8"Loading height 3636 mm 11'11" 3577 mm 11'9" 4145 mm 13'7"

17) Loading reach 1768 mm 5'10" 1868 mm 6'2" 2771 mm 9'1"Swing arc 180° 180° 180°Bucket rotation 205° 205° 205°

18) Stabilizer spread, operating position (center of pad) 3310 mm 10'10" 3310 mm 10'10" 3310 mm 10'10"19) Stabilizer spread, operating position

(outside edge of pad) 3770 mm 12'4" 3770 mm 12'4" 3770 mm 12'4"Stabilizer spread, transport position 2322 mm 7'7" 2322 mm 7'7" 2322 mm 7'7"Bucket dig force 51.8 kN 11,655 lb 51.1 kN 11,491 lb 51.1 kN 11,491 lbStick dig force 31.8 kN 7151 lb 31.8 kN 7151 lb 21.4 kN 5250 lb

5-8 Edition 40

Backhoe Loaders Lift Capacities● 416E

Lift capacities are over-end values. Machine equipped with 2WD, OROPS, 0.76 m3 (1 yd3) general purpose bucket,and 116 kg (255 lb) counterweight. Extendible stick includes 488 kg (1075 lb) counterweight.

Standard Stick

KEYA — Boom lift kg lbB — Stick lift kg lb

FEET METERS

FEET

METERS

Extendible Stick —Retracted

FEET METERS

FEET

METERS

Extendible Stick —Extended

FEET METERS

FEET

METERS

Edition 40 5-9

5

Backhoe LoadersPerformance Data● 420E/420E IT

Single-Tilt Loader

General Purpose General Purpose General PurposeMACHINE DIMENSIONS 0.96 m3 (1.25 yd3) 1.0 m3 (1.31 yd3) 1.07 m3 (1.4 yd3)







Single-Tilt Loader

Multi Purpose Multi PurposeMACHINE DIMENSIONS 1.0 m3 (1.3 yd3) 1.1 m3 (1.4 yd3)

1) Overall transport length 7307 mm 24'0" 7307 mm 24'0"Overall length 7206 mm 23'8" 7206 mm 23'8"

2) Overall transport height 3577 mm 11'9" 3577 mm 11'9"Overall width 2438 mm 8'0" 2438 mm 8'0"

3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3"4) Height to top of exhaust stack 2754 mm 9'0" 2754 mm 9'0"

Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1"5) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10"

Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2"Rear wheel tread gauge 1727 mm 5'8" 1727 mm 5'8"

6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3"

Single-Tilt Loader

IT Loader

5-10 Edition 40

Backhoe Loaders Performance Data● 420E/420E IT

IT Loader with Quick Coupler

General Purpose General Purpose Multi Purpose Multi PurposeMACHINE DIMENSIONS 0.96 m3 (1.25 yd3) 1.0 m3 (1.31 yd3) 1.0 m3 (1.3 yd3) 1.1 m3 (1.4 yd3)

1) Overall transport length 7434 mm 24'5" 7402 mm 24'3" 7363 mm 24'2" 7363 mm 24'2"Overall length 7399 mm 24'3" 7354 mm 24'2" 7307 mm 24'0" 7307 mm 24'0"

2) Overall transport height 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9" 3577 mm 11'9"Overall width 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0"

3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3"4) Height to top of exhaust stack 2754 mm 9'0" 2754 mm 9'0" 2754 mm 9'0" 2754 mm 9'0"

Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" 320 mm 1'1" 320 mm 1'1"5) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10"

Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2"Rear wheel tread gauge 1727 mm 5'8" 1727 mm 5'8" 1727 mm 5'8" 1727 mm 5'8"

6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3"

Single-Tilt Loader

IT Loader

Edition 40 5-11

5


Single-Tilt LoaderLOADER BUCKET DIMENSIONS General Purpose General Purpose General PurposeAND PERFORMANCE 0.96 m3 (1.25 yd3) 1.0 m3 (1.31 yd3) 1.07 m3 (1.4 yd3)

Capacity (SAE) rated 0.96 m3 1.25 yd3 1.0 m3 1.31 yd3 1.07 m3 1.4 yd3

Width 2262 mm 7'5" 2406 mm 7'11" 2262 mm 7'5"Lift capacity at maximum height 2929 kg 6457 lb 2937 kg 6475 lb 2868 kg 6323 lbBreakout force 45.6 kN 10,242 lb 46.3 kN 10,401 lb 45.1 kN 10,130 lb




Maximum grading angle 107° 108° 108°Width of dozer cutting edge N/A N/A N/A


Jaw opening maximum N/A N/A N/AWeight (does not include teeth or forks) 438 kg 967 lb 449 kg 989 lb 459 kg 1012 lb

Single-Tilt LoaderLOADER BUCKET DIMENSIONS Multi Purpose Multi PurposeAND PERFORMANCE 1.0 m3 (1.3 yd3) 1.1 m3 (1.4 yd3)

Capacity (SAE) rated 1.0 m3 1.3 yd3 1.1 m3 1.4 yd3

Width 2262 mm 7'5" 2406 mm 7'11"Lift capacity at maximum height 2739 kg 6038 lb 2711 kg 5977 lbBreakout force 47.1 kN 10,580 lb 46.9 kN 10,546 lb

7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10"Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1"

8) Dump angle at full height 44° 44°Dump height at maximum angle 2624 mm 8'7" 2624 mm 8'7"

9) Dump reach at maximum angle 761 mm 2'6" 761 mm 2'6"10) Maximum bucket rollback at ground level 40° 40°11) Digging depth 133 mm 5" 133 mm 5"

Maximum grading angle 110° 110°Width of dozer cutting edge 2262 mm 7'5" 2406 mm 7'11"

12) Grill to bucket cutting edge, carry position 1480 mm 4'10" 1480 mm 4'10"13) Maximum operating height 4244 mm 13'11" 4244 mm 13'11"

Jaw opening maximum 790 mm 2'7" 790 mm 2'7"Weight (does not include teeth or forks) 723 kg 1594 lb 751 kg 1656 lb

5-12 Edition 40


LOADER BUCKET IT Loader with Quick CouplerDIMENSIONS AND General Purpose General Purpose Multi Purpose Multi PurposePERFORMANCE 0.96 m3 (1.25 yd3) 1.0 m3 (1.31 yd3) 1.0 m3 (1.3 yd3) 1.1 m3 (1.4 yd3)

Capacity (SAE) rated 0.96 m3 1.25 yd3 1.00 m3 1.31 yd3 1.0 m3 1.3 yd3 1.1 m3 1.4 yd3

Width 2262 mm 7'5" 2406 mm 7'11" 2262 mm 7'5" 2406 mm 7'11"Lift capacity at maximum height 3164 kg 6975 lb 3162 kg 6971 lb 2911 kg 6418 lb 2883 kg 6356 lbBreakout force 47.1 kN 10,593 lb 47.5 kN 10,672 lb 45.6 kN 10,256 lb 45.4 kN 10,198 lb

7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10"Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1"

8) Dump angle at full height 45° 45° 45° 45°Dump height at maximum angle 2507 mm 8'2" 2539 mm 8'4" 2574 mm 8'5" 2574 mm 8'5"

9) Dump reach at maximum angle 831 mm 2'9" 799 mm 2'7" 778 mm 2'7" 778 mm 2'7"10) Maximum bucket rollback

at ground level 40° 40° 40° 40°11) Digging depth 147 mm 6" 147 mm 6" 137 mm 5" 137 mm 5"

Maximum grading angle 108° 110° 111° 111°Width of dozer cutting edge N/A N/A 2262 mm 7'5" 2406 mm 7'11"

12) Grill to bucket cutting edge,carry position 1607 mm 5'3" 1575 mm 5'2" 1536 mm 5'0" 1536 mm 5'0"

13) Maximum operating height 4260 mm 14'0" 4256 mm 14'0" 4335 mm 14'3" 4335 mm 14'3"Jaw opening maximum N/A N/A 790 mm 2'7" 790 mm 2'7"Weight (does not include

teeth or forks) 434 kg 957 lb 444 kg 978 lb 703 kg 1550 lb 731 kg 1612 lb

Single-Tilt Loader

IT Loader

Edition 40 5-13

5









Single-Tilt Loader

IT Loader

5-14 Edition 40


DIMENSIONS WITH FORKS/MATERIAL-HANDLING ARM Cat 420E IT Operating Specifications with Forks

Fork Tine Length 1070 mm (3'6") 1220 mm (4'0") 1370 mm (4'6")

Operating load (SAE J1197) 2095 kg* 4618 lb* 2025 kg* 4464 lb* 1958 kg* 4317 lb*SAE load center 535 mm 1'9" 610 mm 2'0" 685 mm 2'3"Operating load (CEN 474-4) 2507 kg 5526 lb 2488 kg 5485 lb 2467 kg 5438 lbCEN load center 500 mm 1'8" 500 mm 1'8" 500 mm 1'8"Overall length (A) (forks on ground) 7717 mm 25'4" 7867 mm 25'10" 8017 mm 26'4"

5892 mm19'4"

6733 mm22'1"

5051 mm16'7"

1549 mm5'1"

†3147 mm10'4" †4145 mm

13'7"

†5145 mm16'11"

†2541 mm8'4"

†2000 mm6'7"

1998 mm6'7"

2996 mm9'10"

3996 mm13'1"

†585 mm1'11"

†1462 mm4'10"

DIMENSIONS WITH FORKS/MATERIAL-HANDLING ARM Cat 420E IT Operating Specifications with Material Handling Arm

Material-Handling Arm Position Retracted Mid-Position Extended

Operating load (SAE J1197 and CEN 474-4) 961 kg** 2119 lb** 608 kg** 1340 lb** 445 kg** 981 lb**Overall length, maximum 8809 mm 28'11" 9807 mm 32'2" 10 807 mm 35'5"

3238 mm10'7"

20 mm0'1"

(A)

†665 mm2'2"

1458 mm4'9"

†985 mm3'3"

†1427 mm4'8"

*Tip limited.

†Measured from nose of machine.

**Hydraulically limited.

Dimensions and performance specificationsshown are for 4WD machines equipped with12.5/80-18 SGL front tires, 19.5L-24 IT525rear tires, ROPS canopy, standard stick with610 mm (24 in) standard duty bucket, and0.96 m3 (1.25 yd3) loader bucket and standardequipment unless otherwise specified.


Edition 40 5-15

5

Backhoe LoadersLift Capacities● 420E/420E IT

Lift capacities are over-end values. Machine equipped with 2WD, OROPS, 0.96 m3 (1.25 yd3) general purposebucket, and 116 kg (255 lb) counterweight. Extendible stick includes 488 kg (1075 lb) counterweight.

*Indicates lift capacity is stability limited.

Standard Stick


FEET METERS

FEET

METERS


FEET METERS

FEET

METERS


FEET METERS

FEET

METERS

5-16 Edition 40


Single-Tilt Loader

MACHINE DIMENSIONS General Purpose Multi Purpose


2) Overall transport height 3736 mm 12'2" 3736 mm 12'2"Overall width (Standard frame) 2368 mm 7'7" 2368 mm 7'7"Overall width (Narrow frame) 2262 mm 7'5" 2262 mm 7'5"




6) Wheelbase (AWD) 2200 mm 7'3" 2200 mm 7'3"

2

3

6

7

8

10

11

141315

16

12

17

1

5

4 3

9

Single-Tilt Loader

Edition 40 5-17

5


LOADER BUCKET Single-Tilt Loader Single-Tilt LoaderDIMENSIONS AND (Narrow Bucket) (Standard Bucket)

PERFORMANCE General Purpose Multi Purpose General Purpose Multi Purpose


Width 2262 mm 7'5" 2262 mm 7'5" 2406 mm 7'9" 2406 mm 7'9"Lift capacity at maximum height 2454 kg 5410 lb 2292 kg 5050 lb 2423 kg 5342 lb 2305 kg 5082 lbBreakout force 39.5 kN 8880 lb 38.6 kN 8680 lb 39 kN 8767 lb 39 kN 8767 lb

7) Maximum hinge pin height 3321 mm 10'11" 3321 mm 10'11" 3314 mm 10'8" 3314 mm 10'8"8) Dump angle at full height 43° 43° 44° 44°

Dump height at maximum angle 2633 mm 8'8" 2666 mm 8'9" 2621 mm 8'6" 2653 mm 8'7"9) Dump reach at maximum angle 794 mm 2'7" 714 mm 2'4" 843 mm 2'7" 770 mm 2'5"

10) Maximum bucket rollbackat ground level 39° 40° 38° 39°

11) Digging depth 78 mm 3" 109 mm 4" 91 mm 3" 118 mm 3"Maximum grading angle 109° 111° 109° 112°Width of dozer cutting edge N/A 2396 mm 7'10" N/A 2406 mm 7'8"

12) Maximum operating height 4201 mm 13'9" 4229 mm 13'10" 4211 mm 13'8" 4238 mm 13'9"Jaw opening maximum N/A 927 mm 3'0" N/A 790 mm 2'6"Weight (does not include



13) Digging depth, manufacturers maximum 4834 mm 15'8" 4883 mm 16'0" 5887 mm 19'3"14) Digging depth, 610 mm (2'0") flat bottom 4804 mm 15'7" 4846 mm 15'9" 5866 mm 19'2"15) Reach from swing pivot at ground line 5558 mm 18'2" 5598 mm 18'3" 6610 mm 21'6"

Loading height 3802 mm 12'4" 3743 mm 12'2" 4311 mm 14'1"16) Loading reach 1620 mm 5'3" 1720 mm 5'6" 2623 mm 8'6"

Swing arc 180° 180° 180°Bucket rotation 205° 205° 205°

17) Stabilizer width (Standard frame) 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7"Stabilizer width (Narrow frame) 2196 mm 7'2" 2196 mm 7'2" 2196 mm 7'2"Bucket dig force 52 kN 11,690 lb 51 kN 11,465 lb 51 kN 11,465 lbStick dig force 32 kN 7193 lb 32 kN 7193 lb 24 kN 5395 lbTotal side shift travel (Standard frame) 1258 mm 4'1" 1258 mm 4'1" 1258 mm 4'1"Total side shift travel (Narrow frame) 1096 mm 3'7" 1096 mm 3'7" 1096 mm 3'7"

1

5

34

6

7

8

9

10

11

141315

16

12

3

17

2

5-18 Edition 40


Parallel Loader Single-Tilt Loader

MACHINE DIMENSIONS General Purpose Multi Purpose General Purpose Multi Purpose


2) Overall transport height 3736 mm 12'2" 3736 mm 12'2" 3740 mm 12'3" 3740 mm 12'3"Overall width (Standard frame) 2368 mm 7'7" 2368 mm 7'7" 2396 mm 7'10" 2406 mm 7'11"Overall width (Narrow frame) 2262 mm 7'5" 2262 mm 7'5" 2262 mm 7'5" 2262 mm 7'5"




6) Wheelbase (AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3"

Single-Tilt Loader

Edition 40 5-19

5


LOADER BUCKET Parallel Loader Single-Tilt LoaderDIMENSIONS AND (Narrow Bucket) (Narrow Bucket)



Width 2262 mm 7'5" 2262 mm 7'5" 2262 mm 7'5" 2262 mm 7'5"Lift capacity at maximum height 3468 kg 7646 lb 3232 kg 7125 lb 2997 kg 6607 lb 2806 kg 6186 lbBreakout force 51 kN 11,465 lb 56.6 kN 12,725 lb 47 kN 10,570 lb 45.9 kN 10,320 lb







LOADER BUCKET Parallel Loader Single-Tilt LoaderDIMENSIONS AND (Standard Bucket) (Standard Bucket)



Width 2406 mm 7'9" 2406 mm 7'9" 2396 mm 7'10" 2406 mm 7'11"Lift capacity at maximum height 3389 kg 7471 lb 3219 kg 7096 lb 2917 kg 6432 lb 2726 kg 6010 lbBreakout force 51 kN 11,465 lb 55 kN 12,364 lb 46.3 kN 10,418 lb 45.2 kN 10,170 lb







1

5

34

6

7

8

9

10

11

141315

16

12

3

17

2

5-20 Edition 40


Single-Tilt Loader





17) Stabilizer width (Standard frame) 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7"Stabilizer width (Narrow frame) 2196 mm 7'2" 2196 mm 7'2" 2196 mm 7'2"Bucket dig force 52 kN 11,690 lb 51 kN 11,465 lb 51 kN 11,465 lbStick dig force 32 kN 7193 lb 32 kN 7193 lb 23 kN 5170 lbTotal side shift travel (Standard frame) 1258 mm 4'1" 1258 mm 4'1" 1258 mm 4'1"Total side shift travel (Narrow frame) 1096 mm 3'7" 1096 mm 3'7" 1096 mm 3'7"

Edition 40 5-21

5


Single-Tilt Loader

General Purpose General Purpose General PurposeMACHINE DIMENSIONS 1.0 m3 (1.31 yd3) 1.07 m3 (1.4 yd3) 1.15 m3 (1.5 yd3)







Single-Tilt Loader

Multi Purpose Multi PurposeMACHINE DIMENSIONS 1.0 m3 (1.3 yd3) 1.1 m3 (1.4 yd3)






6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3"

Single-Tilt Loader

IT Loader

5-22 Edition 40


IT Loader with Quick Coupler

General Purpose General Purpose Multi Purpose Multi PurposeMACHINE DIMENSIONS 1.0 m3 (1.31 yd3) 1.15 m3 (1.5 yd3) 1.0 m3 (1.3 yd3) 1.1 m3 (1.4 yd3)


2) Overall transport height 3866 mm 12'8" 3866 mm 12'8" 3866 mm 12'8" 3866 mm 12'8"Overall width 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0"




6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3"

Single-Tilt Loader

IT Loader

Edition 40 5-23

5


Single-Tilt LoaderLOADER BUCKET DIMENSIONS General Purpose General Purpose General PurposeAND PERFORMANCE 1.0 m3 (1.31 yd3) 1.07 m3 (1.4 yd3) 1.15 m3 (1.5 yd3)


Width 2406 mm 7'11" 2262 mm 7'5" 2406 mm 7'11"Lift capacity at maximum height 2937 kg 6475 lb 2868 kg 6323 lb 2849 kg 6281 lbBreakout force 46.3 kN 10,401 lb 45.1 kN 10,130 lb 44.9 kN 10,091 lb




Maximum grading angle 108° 108° 108°Width of dozer cutting edge N/A N/A N/A


Jaw opening maximum N/A N/A N/AWeight (does not include teeth or forks) 449 kg 989 lb 459 kg 1012 lb 479 kg 1056 lb

Single-Tilt LoaderLOADER BUCKET DIMENSIONS Multi Purpose Multi PurposeAND PERFORMANCE 1.0 m3 (1.3 yd3) 1.1 m3 (1.4 yd3)


Width 2262 mm 7'5" 2406 mm 7'11"Lift capacity at maximum height 2739 kg 6038 lb 2711 kg 5977 lbBreakout force 47.1 kN 10,580 lb 46.9 kN 10,546 lb

7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10"Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1"

8) Dump angle at full height 44° 44°Dump height at maximum angle 2624 mm 8'7" 2624 mm 8'7"

9) Dump reach at maximum angle 761 mm 2'6" 761 mm 2'6"10) Maximum bucket rollback at ground level 40° 40°11) Digging depth 133 mm 5" 133 mm 5"

Maximum grading angle 110° 110°Width of dozer cutting edge 2262 mm 7'5" 2406 mm 7'11"

12) Grill to bucket cutting edge, carry position 1480 mm 4'10" 1480 mm 4'10"13) Maximum operating height 4244 mm 13'11" 4244 mm 13'11"

Jaw opening maximum 790 mm 2'7" 790 mm 2'7"Weight (does not include teeth or forks) 723 kg 1594 lb 751 kg 1656 lb

5-24 Edition 40


IT Loader

LOADER BUCKET IT Loader with Quick CouplerDIMENSIONS AND General Purpose General Purpose Multi Purpose Multi PurposePERFORMANCE 1.0 m3 (1.31 yd3) 1.15 m3 (1.5 yd3) 1.0 m3 (1.3 yd3) 1.1 m3 (1.4 yd3)


Width 2406 mm 7'11" 2406 mm 7'11" 2262 mm 7'5" 2406 mm 7'11"Lift capacity at maximum height 3162 kg 6971 lb 3131 kg 6903 lb 2911 kg 6418 lb 2883 kg 6356 lbBreakout force 47.5 kN 10,672 lb 46.8 kN 10,525 lb 45.6 kN 10,256 lb 45.4 kN 10,198 lb

7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10"Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1"

8) Dump angle at full height 45° 45° 45° 45°Dump height at maximum angle 2539 mm 8'4" 2509 mm 8'3" 2574 mm 8'5" 2574 mm 8'5"

9) Dump reach at maximum angle 799 mm 2'7" 830 mm 2'9" 778 mm 2'7" 778 mm 2'7"10) Maximum bucket rollback

at ground level 40° 40° 40° 40°11) Digging depth 147 mm 6" 146 mm 6" 137 mm 5" 137 mm 5"

Maximum grading angle 110° 108° 111° 111°Width of dozer cutting edge N/A N/A 2262 mm 7'5" 2406 mm 7'11"

12) Grill to bucket cutting edge,carry position 1575 mm 5'2" 1598 mm 5'3" 1536 mm 5'0" 1536 mm 5'0"

13) Maximum operating height 4256 mm 14'0" 4335 mm 14'3" 4335 mm 14'3" 4335 mm 14'3"Jaw opening maximum N/A N/A 790 mm 2'7" 790 mm 2'7"Weight (does not include


Single-Tilt Loader

Edition 40 5-25

5









IT Loader

Single-Tilt Loader

5-26 Edition 40


DIMENSIONS WITH FORKS/MATERIAL-HANDLING ARM Cat 430E IT Operating Specifications with Forks

Fork Tine Length 1070 mm (3'6") 1220 mm (4'0") 1370 mm (4'6")

Operating load (SAE J1197) 2200 kg 4850 lb* 2127 kg 4689 lb* 2058 kg 4536 lb*SAE load center 535 mm 1'9" 610 mm 2'0" 685 mm 2'3"Operating load (CEN 474-4) 2507 kg 5526 lb 2488 kg 5485 lb 2467 kg 5438 lbCEN load center 500 mm 1'8" 500 mm 1'8" 500 mm 1'8"Overall length (A) (forks on ground) 7857 mm 25'9" 8007 mm 26'3" 8157 mm 26'9"

5892 mm19'4"

6733 mm22'1"

5051 mm16'7"

1549 mm5'1"

†3147 mm10'4" †4145 mm

13'7"

†5145 mm16'11"

†2541 mm8'4"

†2000 mm6'7"

1998 mm6'7"

2996 mm9'10"

3996 mm13'1"

†585 mm1'11"

†1462 mm4'10"

DIMENSIONS WITH FORKS/MATERIAL-HANDLING ARM Cat 430E IT Operating Specifications with Material-Handling Arm

Material-Handling Arm Position Retracted Mid-Position Extended

Operating load (SAE J1197 and CEN 474-4) 961 kg 2119 lb** 608 kg 1340 lb** 445 kg 981 lb**Overall length, maximum 8948 mm 29'4" 9948 mm 32'8" 10 947 mm 35'11"

3238 mm10'7"

20 mm1"

(A)

†665 mm2'2"

1458 mm4'9"

†985 mm3'3"

†1427 mm4'8"

*Tip limited.


**Hydraulically limited.

Dimensions and performance specificationsshown are for 4WD machines equipped with12.5/80-18 SGL front tires, 19.5L-24 IT525rear tires, ROPS canopy, standard stick with610 mm (24 in) standard duty bucket, and1.00 m3 (1.31 yd3) loader bucket and standardequipment unless otherwise specified.


Edition 40 5-27

5

Backhoe LoadersLift Capacities● 430E/430E IT

Lift capacities are over-end values. Machine equipped with 4WD, OROPS, 1.0 m3 (1.31 yd3) general purposebucket, and 116 kg (255 lb) counterweight. Extendible stick includes 488 kg (1075 lb) counterweight.


Standard Stick


FEET METERS

FEET

METERS


FEET METERS

FEET

METERS


FEET METERS

FEET

METERS

5-28 Edition 40


Parallel Loader








2

3

6

7

10

11

141315

16

12

17

1

5

34

9

8

Parallel Loader

Edition 40 5-29

5


LOADER BUCKET DIMENSIONS Parallel Loader

AND PERFORMANCE General Purpose Multi Purpose


Width 2406 mm 7'8" 2406 mm 7'8"Lift capacity at maximum height 3389 kg 7471 lb 3389 kg 7471 lbBreakout force 51 kN 11,465 lb 55 kN 12,364 lb

7) Maximum hinge pin height 3340 mm 10'9" 3340 mm 10'9"8) Dump angle at full height 45° 45°

Dump height at maximum angle 2634 mm 8'6" 2668 mm 8'7"9) Dump reach at maximum angle 795 mm 2'6" 724 mm 2'3"

10) Maximum bucket rollback at ground level 39° 39°11) Digging depth 91 mm 3" 118 mm 4"

Maximum grading angle 112° 115°Width of dozer cutting edge N/A 2406 mm 7'8"

12) Maximum operating height 4238 mm 13'9" 4264 mm 13'9"Jaw opening maximum N/A 790 mm 2'7"Weight (does not include teeth or forks) 428 kg 944 lb 611 kg 1347 lb





17) Stabilizer width 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7"Bucket dig force 57 kN 12,814 lb 56 kN 12,589 lb 56 kN 12,589 lbStick dig force 43 kN 9666 lb 43 kN 9666 lb 31 kN 6969 lbTotal side shift travel 1258 mm 4'1" 1258 mm 4'1" 1258 mm 4'1"

5-30 Edition 40


51

4 3

2

3

17

7

12

13 1416

15

11

8

10

9

6

Parallel Loader








Parallel Loader

Edition 40 5-31

5









Maximum grading angle 107° 107°Width of dozer cutting edge — 2434 mm 7'9"

12) Maximum operating height 4339 mm 14'2" 4409 mm 14'4"Jaw opening maximum 790 mm 2'7"Weight (does not include teeth or forks) 438 kg 965 lb 744 kg 1460 lb






5-32 Edition 40


Parallel Loader






Front wheel tread gauge 1915 mm 6'2" 1915 mm 6'2"Rear wheel tread gauge 1713 mm 5'6" 1713 mm 5'6"Rear wheel tread gauge (AWS) 1890 mm 6'2" 1890 mm 6'2"


2

3

6

7

10

11

141315

16

12

17

1

5

34

9

8

Parallel Loader

Edition 40 5-33

5









Maximum grading angle 112° 115°Width of dozer cutting edge N/A 2406 mm 7'8"

12) Maximum operating height 4238 mm 13'9" 4264 mm 13'9"Jaw opening maximum N/A 790 mm 2'7"Weight (does not include teeth or forks) 428 kg 944 lb 611 kg 1347 lb






5-34 Edition 40


Parallel Loader








7

12

13 14

51

4 3

2

3

17

16

15

11

8

9

10

6

Parallel Loader

Edition 40 5-35

5









Maximum grading angle 108° 107°Width of dozer cutting edge — 2434 mm 7'9"

12) Maximum operating height 4528 mm 14'8" 4520 mm 14'8"Jaw opening maximum 913 mm 3'0"Weight (does not include teeth or forks) 462 kg 1018 lb 809 kg 1783 lb






5-36 Edition 40


Single-Tilt Loader

IT Loader

Dimensions and performance specifications shown are for machines equipped with 15-19.5 (12 PR) front tires, 21L-24 (18 PR) rear tires, ROPS canopy, standard stickwith 610 mm (24 in) heavy-duty bucket, and 1.34 m3 (1.75 yd3) loader bucket and standard equipment unless otherwise specified.

Single-Tilt Loader

General Purpose Multi PurposeMACHINE DIMENSIONS 1.3 m3 (1.7 yd3) 1.25 m3 (1.63 yd3)

1) Overall length, loader on ground, standard stick 7913 mm 26'0" 7786 mm 25'7"Overall length, loader on ground, extendible stick 7913 mm 26'0" 7786 mm 25'7"Overall transport length, standard stick 7916 mm 26'0" 7826 mm 25'8"Overall transport length, extendible stick 7916 mm 26'0" 7826 mm 25'8"

2) Overall transport height, standard stick 4143 mm 13'7" 4143 mm 13'7"Overall transport height, extendible stick 4159 mm 13'8" 4159 mm 13'8"Overall width 2436 mm 8'0" 2436 mm 8'0"


Rear axle centerline to front grill 2832 mm 9'4" 2832 mm 9'4"Height to loader hinge pin (transport) 469 mm 1'6" 481 mm 1'7"Ground clearance (minimum) 322 mm 1'1" 322 mm 1'1"

5) Rear axle to loader bucket on ground 4494 mm 14'9" 4367 mm 14'4"Front wheel tread gauge 2016 mm 6'7" 2016 mm 6'7"Rear wheel tread gauge 1814 mm 5'11" 1814 mm 5'11"

6) Wheelbase 2200 mm 7'3" 2200 mm 7'3"

Edition 40 5-37

5


Single-Tilt Loader

Multi PurposeLOADER BUCKET DIMENSIONS General Purpose Multi Purpose with ForksAND PERFORMANCE 1.3 m3 (1.75 yd3) 1.1 m3 (1.5 yd3) 1.1 m3 (1.5 yd3)


Width 2434 mm 8'0" 2425 mm 7'11" 2425 mm 7'11"Lift capacity at maximum height 3828 kg 8439 lb 3754 kg 8276 lb 3661 kg 8071 lbBreakout force 52 249 N 11,746 lb 60 067 N 13,503 lb 59 758 N 13,434 lbTipping load at breakout point 8376 kg 18,466 lb 8785 kg 19,368 lb 8685 kg 19,147 lb

7) Maximum hinge pin height 3486 mm 11'5" 3486 mm 11'5" 3486 mm 11'5"8) Dump angle at full height 44° 44° 44°

Dump height at maximum angle 2647 mm 8'8" 2741 mm 9'0" 2741 mm 9'0"9) Dump reach at maximum angle 858 mm 2'10" 787 mm 2'7" 787 mm 2'7"

10) Maximum bucket rollback at ground level 40° 40° 40°11) Digging depth 229 mm 9" 195 mm 8" 195 mm 8"

Maximum grading angle 106° 109° 109°Width of dozer cutting edge N/A 2406 mm 7'11" 2406 mm 7'11"


Jaw opening maximum N/A 864 mm 2'10" 864 mm 2'10"Bucket jaw clamping force N/A 39 800 N 8947 lb 39 800 N 8947 lbWeight 692 kg 1526 lb 909 kg 2004 lb 1062 kg 2341 lb


14) Digging depth, SAE (maximum) 5257 mm 17'3" 5259 mm 17'3" 6500 mm 21'4"Digging depth, 2438 mm (8'0") flat bottom 4923 mm 16'2" 4924 mm 16'2" 6229 mm 20'5"

15) Digging depth, 610 mm (2'0") flat bottom 5221 mm 17'2" 5221 mm 17'2" 6465 mm 21'3"Reach from rear axle centerline at ground line 7952 mm 26'1" 7952 mm 26'1" 9135 mm 30'0"

16) Reach from swing pivot at ground line 6701 mm 22'0" 6702 mm 22'0" 7884 mm 25'10"Overall operating height 6526 mm 21'5" 6524 mm 21'5" 7368 mm 24'2"Loading height 4447 mm 14'7" 4447 mm 14'7" 5206 mm 17'1"


18) Stabilizer spread, operating position (center of pad) 3614 mm 11'10" 3614 mm 11'10" 3614 mm 11'10"19) Stabilizer spread — operating position

(outside edge of pad) 4055 mm 13'4" 4055 mm 13'4" 4055 mm 13'4"Stabilizer spread, transport position 2451 mm 8'0" 2451 mm 8'0" 2451 mm 8'0"Bucket dig force 79 004 N 17,760 lb 79 004 N 17,760 lb 79 004 N 17,760 lbStick dig force 52 500 N 11,802 lb 53 203 N 11,960 lb 40 000 N 8992 lbLeveling angle (maximum slope on which

machine will make a vertical cut) 13° 13° 13°

5-38 Edition 40

Backhoe Loaders Lift Capacities● 450E

Lift capacities are over-end values per SAE J31; machine equipped with 4WD, OROPS, 1.34 m3 (1.75 yd3) general-purpose loader bucket, 610 mm (24 in) heavy duty backhoe bucket and 454 kg (1000 lb) counterweight. Extendiblestick lift capacities include 682 kg (1500 lb) counterweight.


Standard Stick


FEET METERS

FEET

METERS


FEET METERS

FEET

METERS


FEET METERS

FEET

METERS

Standard Duty Buckets (SD)416E, 420E, 422E, 428E, 430E, 432E, 442E

SAEWidth Capacity Weight No. of

mm in L ft3 kg lb Teeth

305 12 78 2.8 97 213 3457 18 118 4.2 115 253 4610 24 175 6.2 132 290 5762 30 233 8.2 147 323 5914 36 292 10.3 165 363 6

Heavy Duty Buckets (HD)416E, 420E, 422E, 428E, 430E, 432E, 442E



305 12 79 2.8 107 235 3406 16 105 3.7 123 270 3457 18 119 4.2 129 283 4610 24 176 6.2 153 337 5762 30 232 8.2 170 375 5914 36 292 10.3 194 426 6

*Bolt-on teeth available.

Soil Excavation Buckets (SE)416E, 420E, 422E, 428E, 430E, 432E, 442E



457 18 180 6.4 153 336 4610 24 241 8.5 179 395 5762 30 320 11.3 197 434 5914 36 380 13.4 223 491 6

High Capacity Buckets (HC)416E, 420E, 422E, 428E, 430E, 432E, 442E



457 18 181 6.4 149 328 4610 24 241 8.5 174 384 5762 30 320 11.3 192 423 5914 36 380 13.4 218 479 6

Teeth Options: PenetrationSoilSharpTwin SharpChiselWideLong

Extreme Service Buckets (ES)422E, 428E, 432E, 442E



305 12 64 2.2 106 233 3457 18 96 3.4 132 291 4610 24 142 5.2 152 335 4762 30 189 6.2 177 390 6

Heavy Duty Buckets (HD)450E



457 18 190 6.7 211 465 3610 24 280 9.9 252 554 4762 30 380 13.4 283 625 4914 36 480 17.0 326 719 6

Edition 40 5-39

5

Backhoe LoadersBackhoe Bucket Capacities

Heavy Duty Rock Buckets416E, 420E, 430E



305 12 70 2.5 114 251 3457 18 127 4.6 138 304 4610 24 198 7.0 173 381 5762 30 255 9.5 180 396 5914 36 311 11.5 205 451 6

Coral Buckets



305 12 65 2.3 122 270 4457 18 96 3.4 146 322 6610 24 142 5.0 173 382 8762 30 190 6.7 199 439 10

Pin Lock Buckets, Heavy Duty(North America)



305 12 96 3.4 127 278 3406 16 122 4.3 144 317 3457 18 139 4.9 150 330 4610 24 207 7.3 180 397 5762 30 275 9.7 205 452 5914 36 346 12.2 236 519 6

Pin Lock Buckets, High Capacity(North America)



305 12 130 4.6 146 322 3406 16 159 5.6 164 362 3457 18 184 6.5 172 378 4610 24 272 9.6 204 448 5762 30 366 12.9 230 506 5914 36 459 16.2 262 575 6

Ditch Cleaning Buckets(North America)



1219 48 368 13.0 231 510 N/A1372 54 425 15.0 252 555 N/A1524 60 481 17.0 272 600 N/A

Ditch Cleaning Buckets(Europe, Africa, Middle East)



1200 48 200 7.8 123 271 N/A1400 54 260 9.2 137 302 N/A1500 60 290 10.2 145 320 N/A1600 63 310 10.9 152 335 N/A1800 70 350 12.4 166 366 N/A

5-40 Edition 40

Backhoe Loaders Backhoe Bucket Capacities

Work tools for Cat backhoe loaders are divided into two groups.For technical questions relating to all work tools inside the U.S.: (800) 282-5384.Europe, Africa, Middle East: 31 73 63 996 00.

Loader Work Tools Auxiliary Hydraulics required1. IT Angle Blade Multi-Purpose Hydraulics included with IT2. IT Asphalt Cutter not required3. IT Bale Spear not required4. IT Broom: Angle and Pick-up* Multi-Purpose Hydraulics included with IT5. IT Bucket, General Purpose not required6. IT Bucket, Multi-Purpose Multi-Purpose Hydraulics included with IT7. IT Bucket, Side-Dump Multi-Purpose Hydraulics included with IT8. IT Forks, Pallet not required9. IT Material Handling Arm not required

10. IT Rake not required11. Quick Coupler, IT Hydraulic Multi-Purpose Hydraulics12. Single Tilt Bucket, General Purpose not required13. Single Tilt Bucket, Multi-Purpose with or without Fold-Over Forks Multi-Purpose Hydraulics14. Single Tilt Hydraulic Quick Coupler includes coupling hydraulics only;

can add Multi-Purpose Hydraulics

*Requires the IT Auxiliary Attachments Control (electrical wiring harness).

Backhoe Work Tools Auxiliary Hydraulics required1. Auger Combined Function Hydraulics2. Bucket, Cemetary not required3. Bucket, Coral not required4. Bucket, Ditch Cleaning not required5. Bucket, Extreme Service not required6. Bucket, Heavy Duty not required7. Bucket, Heavy Duty Rock not required8. Bucket, High Capacity not required9. Bucket, Soil Excavation not required

10. Bucket, Standard Duty not required11. Compactor, Vibratory Plate One Way or Combined Function Hydraulics12. Hammer, Hydraulic One Way or Combined Function Hydraulics13. Quick Coupler, Mechanical Pin-Puller for Cat or Case tools not required14. Quick Coupler, Mechanical Pin-Grabber not required15. Quick Coupler, Mechanical Pin-Puller for Cat or Deere tools not required16. Quick Coupler, Pin Lock not required17. Quick Coupler, Side-Tilting Pin Lock Combined Function Hydraulics18. Ripper not required19. Thumb, Hydraulic Combined Function Hydraulics20. Thumb, Mechanical not required

● Caterpillar Factory Work Tools: Cat work toolsinstalled on machines or shipped separately fromCat Distribution Services. Includes the most pop-ular work tools such as buckets, forks and mate-rial-handling arms. Order from Machine OrdersDivision.

● Cat Work Tools America Asia Pacific (AAP):Cat work tools specifically designed for the Catbackhoe loader by the Cat Work Tool division.Orders inside U.S.: (800) 255-2372. Outside U.S.:00 1 (785) 456-2224.

Edition 40 5-41

5

Backhoe LoadersWork Tools

5-42 Edition 40

Notes —

sebd0350, english performance handbook, edition 40, section 5 · edition 40 5-3 5 specifications...

Documents