secado de gas - aspro

Air Regeneration Gas Dryer

Air Regeneration Gas DryerTechnical Information

Updated to 22/07/09


Technical Features

Modular design let you mount it directly to the ASPRO Compressor Chassis.

Two Drying Chambers.Two Drying Chambers.

Humidity visual indicator in both towers.

Safety Relief Valve in both towersSafety Relief Valve in both towers.

Inlet/Outlet Coalescent Filter with drain valve included.

Differential Pressure Gauge in both towersDifferential Pressure Gauge in both towers.

Bypass valves controlled from the Compressor Control Panel.

Control panel in the same skidControl panel in the same skid.

Actuator valves for inter-change Chamber “A” to “B” controlled from the Compressor Control Panel.

A l d i h N i l i lActuator vales operated with gas. Not require external air supply.

Operative Pressure and Flow: According to ASPRO Compressor model, IODM 115-3/4 or 5 stages.

Inter stage connection for low gas inlet pressure.


Technical Features

Inlet connection size: 2” ANSI B16.5 S300

Outlet connection size: 2” ANSI B16.5 S300Outlet connection size: 2 ANSI B16.5 S300

Auxiliary inlet connection for optional hot air blowing: 11/4” ANSI B16.5 S300 pipes and insulation

Desiccant Material: SILICA GELDesiccant Material: SILICA GEL

Required temperature for regeneration of desiccant material: 150°C to 170°C.

Desiccant volume per chamber: About 250 littersDesiccant volume per chamber: About 250 litters.

Absorption Capacity per chamber: About 82 water litters.

Installation site classification: Class I Division I Group DInstallation site classification: Class I, Division I, Group D.

Design Specification: ASME VIII, div. 1.

E D l i f C f i “CE” il bl i l i A di EN 45014European Declaration of Conformity “CE” available as optional requirement. According to EN 45014,

Directive 97/23/CE (PED) and 94-9 EC ATEX.

Third Party Inspection available as optionalThird Party Inspection available as optional.

Permissible ambient temperature range -30°C to + 50°C.


Technical Features

MODEL


Pictures


P&I


Models

GAS DRYER MODEL INLET PRESSURE (BAR) FLOW REGENERATION QTY TOWER OPTIONALSGAS DRYER MODEL INLET PRESSURE (BAR) FLOW REGENERATION QTY TOWER OPTIONALS

GDM-LP 10 to 25 OPTIONAL WITH AIR 2 KIT FOR REGENERATION

WC

HA

RT

GDM-HP 30 to 60 OPTIONAL WITH AIR 2 KIT FOR REGENERATION

SE

E F

LOW


Kit for regenerationg

Heater power: 12 kWDisplay showing:p y g-Temperature-Running hours-Alarms

Air blower motor: 1,5 kW

1 ¼ inches pipee with insulations


Kit for regenerationg


Dryer flow capacity vs working pressure per chamberModel GDM-LP Model GDM-HP


Estimated absorption time

secado de gas - aspro

Documents