14.21 Draw the isometric view of a frustum of square pyramid of base side 50mm, top face side 20mm and height 60mm, when its axis is vertical.

14.22 Draw the isometric view of a frustum of hexagonal pyramid of base side 30mm, top face side 20mm and height 60mm, when its axis is vertical.

1

14.23 Draw the isometric view of a frustum of cone of base diameter 60mm, top face diameter 35mm and height 50mm, when its axis is vertical.

14.24 A square prism of side 40mm and height 60mm is resting on the HP on its base such that two of its base edges are parallel to VP. It is cut by a section plane which is perpendicular to VP, inclined at 30° to HP and bisecting the axis. Draw the isometric view of the bottom portion of the prism.

2

14. A square prism of side 20mm and height 40mm rests on one of its ends on HP. All the base sides of prism are equally inclined to VP. It is cut by a section plane which is perpendicular to VP, inclined at 45° to HP that passes through a point on the axis 7mm from top. Draw the isometric view of the bottom portion of the prism.

14.25 A hexagonal prism of base edge 30mm and height 70mm is resting on the HP on its base such that two of its base edges are parallel to VP. It is cut by a section plane which is perpendicular to VP, inclined at 40° to HP and bisecting the axis. Draw the isometric view of the bottom portion of the prism.

3

14.26 A hexagonal prism of base edge 25mm and height 50mm is resting on the HP on its base such that two of its base edges are parallel to VP. It is cut by a section plane which is perpendicular to VP, inclined at 45° to HP and bisecting the axis. Draw the isometric view of the bottom portion of the prism.

14.27 A square pyramid of base edge 40mm and axis height 70mm is resting on the HP on its base such that two of its base edges are parallel to VP. It is cut by a section plane which is perpendicular to VP, inclined at 30° to HP and passing through a point at a distance 40mm from the base along the axis. Draw the isometric view of the bottom portion of the pyramid.

4

14.28 A pentagonal pyramid of base edge 30mm and axis height 65mm is resting on the HP on its base such that one of its nearest base edges is parallel to VP. It is cut by a section plane which is perpendicular to VP, inclined at 30° to HP and passing through a point at a distance 35mm from the base along the axis. Draw the isometric view of the bottom portion of the pyramid.

14.30 A cylinder of diameter 50mm and axis height 60mm is resting on the ground on its base. It is cut by a section plane which is perpendicular to VP, inclined at 55° to HP. The section plane passes through a point at a distance 45mm from the base along the axis. Draw the isometric view of the bottom portion of the cylinder.

5

14.63 A cone base diameter 50mm and axis height 80mm rests with its base on HP. A cone is cut by a section plane perpendicular to VP, inclined at 30° to HP and passing through appoint 50mm above the base along the axis. Draw the isometric view of the truncated cone.

14.32 Draw the isometric view of a sphere of diameter 16mm which is centrally placed over frustum of a square pyramid of height 25mm.The frustum has a base of side 35mm and top side 20mm.

6

14.33 A cylinder of diameter 30mm and axis height 50mm is placed on its base centrally at the top of square slab 50 mm and thickness 20mm. Draw the isometric view of the entire set up.

14.35 hemispherical piece of metal 90mm in diameter is joined centrally to the end of a cylindrical piece of metal of diameter 60mm and length 75mm so as to form snap headed rivet. Draw the isometric view of the rivet when it is held with the hemispherical head at the top.

7

14.58 A hexagonal shaped slab of base edges 30mm and height 60mm has a right circular through hole of 40mm diameter. Draw the isometric projection of the slab, if the axes of the hole and slab coincide.

14.59 A dust bin is in the form of a frustum of a hollow square pyramid with the base dimensions of 20mm sides and the top open surface of 45mm sides. Draw the isometric view of the hollow dust bin, if its height is 50mm and the wall thickness is negligible.

8

14.60 A frustum of a cone has its top and bottom diameters 35mm and 50mm respectively and altitude 53mm. It rest on the top face of a frustum of a square pyramid. The sides of the top and bottom faces of the pyramid are 58mm and 70mm respectively. The height is 22mm, draw the isometric view.

14.61 A cylindrical slab of 75mm diameter and 45mm thick is surrounded by a cube of 38mm side. On the top of the cube rest a square pyramid of altitude of 38mm and side of base 25mm. The axes of the solids are in the same straight line. Draw the isometric view of the set up.

9

16.09 A triangular prism of base edge 25mm and axis height 40mm is resting on the ground on its base such that the nearest corner of the base 10mm behind PP and one of its vertical faces is perpendicular to PP. The central plane is 30mm to the right of axis of the prism. The station point is 30mm in front of PP and 50mm above the ground. Draw the perspective view of solid.

16.10 A square prism of side 40mm and height 50mm is resting on the ground on its base. One of its vertical faces is touching the PP and the central plane is 40mm to the right of axis of the prism. The station point is 25mm in front of PP and 65mm above the ground. Draw the perspective view of solid.

10

16.11 A square prism of side 30mm and height 50mm is resting on the ground on its base such that one of its vertical faces is parallel to and 20mm behind to PP. The central plane is 45mm to the right of axis of the prism. The station point is 60mm in front of PP and 65mm above the ground. Draw the perspective view of solid.

16.12 A square prism of side 40mm and height 55mm is resting on the ground on its base. The picture plane is passing through the axis of the prism such that one of its vertical faces is parallel to PP. The central plane is 50mm to the right of axis of the prism. The station point is 40mm in front of PP and 70mm above the ground. Draw the perspective view of solid.

11

16.13 A square pyramid of base edge 40mm and axis height 50mm is resting on the ground on its base such that the nearest base edges is parallel to and 15mm behind PP. The central plane is 20mm to the left of nearest base edge, which is perpendicular to PP. The station point is 35mm in front of PP and 55mm above the ground. Draw the perspective projection of the solid.

16.15 A rectangular pyramid of base edge 60mm×40mm is resting on the ground on its base such that one of its longer base edges is touching PP and the solid is resting behind PP. The central plane is 20mm to the left of the nearest smaller base edge which is perpendicular to PP. The station point is 35mm in front of PP and 80mm above GL. Draw the perspective projection of the pyramid.

12

16.16 A hexagonal pyramid of base edge 30mm and axis height 70mm is resting on the ground on its base such that the nearest base edges is parallel to and 20mm behind PP. The central plane is 60mm to the left of the axis of the solid. The station point is 110mm in front of PP and 80mm above the ground. Draw the perspective view of the solid.

16.17 A hexagonal prism of base edge 20mm and axis height 40mm is resting on the ground on its base such that the nearest base edges is parallel to and 15mm behind PP. The central plane is 30mm to the right of the nearest vertical edge of the prism. The station point is 70mm in front of PP and 90mm above the ground. Draw the perspective view of the solid.

13

16.19 A cylinder of base diameter 50mm and axis height 60mm is resting on the ground on one of its generators such that its nearest end is 15mm behind PP. The central plane is 70mm to right of the axis of the cylinder. The station point is 80mm in front of PP and 60mm above GL. Draw the perspective projection of the cylinder.

16.20 A cube of side 50mm is resting on the ground on one of its faces such that all its vertical faces are equally inclined to PP and the nearest vertical edge touches PP. The central plane is passing through the axis of the cube. The station point is at a distance 60mm in front of PP and 80mm above GL. Draw the perspective projection of the cube.

14

16.21 A pentagonal pyramid of base edge 30mm and axis height 65mm is resting on the ground on its base such that one of its base edges is on PP. The station point is 50mm in front of PP and 80mm above the ground. The central plane passes through the apex of the pyramid. Draw the perspective view of the pyramid.

15