section 10 2119 quartz toilet compartments

Silestone QuartzDekton Ultracompact

Sensa Granite

COSENTINO CENTRALCtra. Baza - Huércal Overa, Km. 59 - 04850 Cantoria - Almería (España)Tel. (+34) 950 444 175 - Fax (+34) 950 444 [email protected] / www.cosentino.com

A N N I V E R S A R Y

YEAR

25YEARWARRANTY

SECTION 10 2119 QUARTZ TOILET COMPARTMENTS

PART 1. GENERAL

1.1 SUMMARY

A. Section Includes: 1. Quartz toilet partitions. 2. Quartz urinal screens. 3. Hardware and accessories.

B. Related Sections: 1. Division 01: Administrative, procedural, and temporary work requirements. 2. Section - - Toilet accessories. 1.2 REFERENCES

A. ASTM International (ASTM): 1. C97 - Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone. 2. C99 - Standard Test Method for Modulus of Rupture of Dimension Stone. 3. C170 - Standard Test Method for Compressive Strength of Dimension Stone. 4. C241 - Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic. 5. C256 - Method of Test for Flexural Strength of Magnesium Oxychloride Cements (Using Simple Bar with Two-Point or Single-Point Loading). 6. C370 - Standard Test Methods for Moisture Expansion of Fired Whiteware Products. 7. C373 - Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products. 8. C482 - Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement. 9. C484 - Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile. 10. C531 - Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes. 11. C648 - Standard Test Method for Breaking Strength of Ceramic Tile. 12. C650 - Standard Test Method for Resistance of Ceramic Tile to Chemical Substances. 13. C672/C672M - Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals. 14. C674 - Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials. 15. C880 - Standard Test Method for Flexural Strength of Dimension Stone. 16. C1026 - Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling. 17. C1028 - Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method. 18. C1353 - Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic. 19. C1378 - Standard Test Method for Determination of Resistance to Staining. 20. E84 - Standard Test Method for Surface Burning Characteristics of Building Materials.

B. Greenguard Environmental Institute (GEI) - Certification Programs.

C. NSF International/American National Standards Institute (NSF/ANSI) 51 - Food Equipment Materials.

D. Underwriters Laboratories, Inc. (UL) 94 - Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances Testing.


Sensa Granite



YEAR

25YEARWARRANTY


1.3 SUBMITTALS A. Submittals for Review: 1. Shop Drawings: Include compartment layout, dimensions, materials, finishes, hardware, accessories, and attachments. 2. Samples: [3 x 3] x inch quartz samples [in specified color.] [showing available colors.]

B. Sustainable Design Submittals: 1. Recycled Content: Certify percentages of post-consumer and pre-consumer recycled content. 2. Low-Emitting Materials: Certify volatile organic compound (VOC) content.

C. Closeout Submittals: 1. Maintenance Data: Include recommended cleaning materials and procedures, and list of materials detrimental to quartz.

1.4 QUALITY ASSURANCE A. Manufacturer Qualifications: 1. Minimum [10] years [documented] experience in manufacture of quartz surfacing materials. 2. Current USGBC Environmental Management System Certificate holder.

1.5 WARRANTY A. Provide manufacturer’s 10 year warranty against defects in materials and workmanship.

PART 2. PRODUCTS

2.1 MANUFACTURERS A. Contract Documents are based on products by Cosentino USA, Inc. (www.cosentinousa.com)

B. Substitutions: [Under provisions of Division 01.] [Not permitted.]

2.2 MATERIALS - QUARTZ A. Quartz Sheet: 1. Product: Silestone Quartz. 2. Composition: Quartz aggregate, polyester resin, and color pigments formed into flat slabs. 3. Bacteriostatic Protection. With Silver Technology. 4. Color: [To be selected from manufacturer’s full color range.] 5. Surface finish: [Polished.] [Leather.] 6. Thickness: [1/2] [3/4] [1-1/4] inch[es]. 7. Physical characteristics: a. Static coefficient of friction: 0.75 dry, 0.68 wet, tested to ASTM C1028. b. Water absorption: 0.03 percent, tested to ASTM C97. c. Compressive strength: 29,100 psi, tested to ASTM C170. d. Bond strength: 235 psi, tested to ASTM C482. e. Modulus of rupture: 6310 psi, tested to ASTM C99. f. Flexural strength: 5840 psi, tested to ASTM C880. g. Breaking strength: 480 lbf, tested to ASTM C648. h. Impact strength: Minus 352 feet, tested to ASTM C256. i. Density: 2.47 grams per cubic centimeter, tested to ASTM C373. j. Stain resistance: Not affected by 10 percent hydrochloric acid or 10 percent KOH, tested to ASTM C650.


Sensa Granite



YEAR

25YEARWARRANTY


k. Thermal shock resistance: Pass 5 cycles, tested to ASTM C484. l. Abrasive index: 65-Ha = 25, tested to ASTM C241. m. Thermal expansion: 1.670 x 10-5 in/in/deg F, tested to ASTM C531. n. Deicing resistance: Rating of 0, tested to ASTM C672/C672M. o. Freeze/thaw resistance: 0 tiles at 15 cycles, tested to ASTM C1026. p. Flame spread rating: Class 1, tested to ASTM E84. q. Flammability: Best rating, tested to UL 94. 8. Certifications: a. GEI indoor Air Quality Certified. b. GEI Children and Schools Certified. c. NSF/ANSI 51 Certified. d. Kosher Certified.

B. Head Rail: Hollow extruded aluminum, with [anti-grip surface and] [aluminum] [stainless steel] wall sockets.

C. Hardware: Chrome plated steel, stainless steel, or aluminum. 1. Wall brackets: [Continuous] [Individual] type. 2. Hinges: Gravity rising or non rising spring tension actuated; conceal operable parts in door. 3. Latches: [Sliding] [Thumb turn] type requiring maximum 5 pound force to operate, with emergency release. 4. Coat hook and door stop: Combination type with rubber tip. 5. Door strike and keeper with rubber bumper.

2.3 FABRICATION

A. Configurations: 1. Toilet partitions: [Floor mounted.] [Floor mounted, headrail braced.] [Floor mounted, ceiling braced.] 2. Urinal screens: [Wall hung, bracket supported.] [Wall hung, continuous channel supported.] [Wall hung, floor braced.] [Wall hung, floor and ceiling braced.]

B. Panel Construction: 1. Solid quartz sheet, minimum 3/4 inch thick, with edges machined to 1/4 inch radius. 2. Prepare for toilet room accessories specified in Section .

C. Pilaster Shoes: Formed [chrome plated] [stainless] steel.

2.4 FINISHES

A. Panels: . [To be selected from manufacturer’s full color range.]

B. Hardware and Accessories: 1. Stainless steel: No. 4 satin. 2. Chrome plated steel: Bright polished. 3. Aluminum: Clear anodized.


Sensa Granite



YEAR

25YEARWARRANTY


PART 3. EXECUTION

3.1 INSTALLATION

A. Install in accordance with manufacturer’s instructions and approved Shop Drawings.

B. Set compartments straight, plumb, level, and aligned.

C. Provide 3/8 to 1/2 inch vertical clearances between walls and panels and between walls and end pilasters.

D. Attach brackets using anchors of type best suited to application.

E. Adjust for floor variations with screw jack integral in pilasters. Conceal floor fastenings with pilaster shoes.

F. Equip doors with two hinges, door latch, door strike and keeper, and bumper/coat hook. Provide one additional bumper/hook on inside of outswinging doors.

3.2 ADJUSTING

A. Adjust hardware for proper operation.

B. Adjust door hinges to hold door open 10 degrees when not latched.

C. Sand out and polish minor scratches and abrasions to match factory finish.

END OF SECTION