section of monoblock hip prostheses dØ · section of monoblock hip prostheses cemented a-74....
TRANSCRIPT
Material : Certified Stainless Steel according to ASTM F.138ISO 5832/1. Available in titanium according to ASTM F.136ISO 5832/3 and Co.Cr-alloy according to ASTM F.75ISO 5832/4
Section of Monoblock Hip Prosthesescemented
Standard Moore Hip Prosthesis
Hüftprothese nach Moore
Prothesè de Moore
Head SizesDiameter
D mm
38 mm39 mm40 mm41 mm42 mm43 mm44 mm45 mm46 mm47 mm48 mm49 mm50 mm51 mm52 mm53 mm54 mm55 mm56 mm57 mm58 mm
StemLengthL mm
130““““““““
150“““““““““““
A mm
25,50““““““““
27“““““““““““
B mm
44,5““““““““
45,5“““““““““““
C mm
38““““““““““““““““““““
102020030011020200300210202003003102020030041020200300510202003006102020030071020200300810202003009102020030101020200301110202003012102020030131020200301410202003015102020030161020200301710202003018102020030191020200302010202003021
Ref. NumberCo.Cr-alloy
102020020011020200200210202002003102020020041020200200510202002006102020020071020200200810202002009102020020101020200201110202002012102020020131020200201410202002015102020020161020200201710202002018102020020191020200202010202002021
Ref. NumberTitanium
102020010011020200100210202001003102020010041020200100510202001006102020010071020200100810202001009102020010101020200101110202001012102020010131020200101410202001015102020010161020200101710202001018102020010191020200102010202001021
Ref. NumberStainless Steel
L
ØD
Indication : The Standard Moore hip prosthesis is designed to use for degeneratedfemoral head replacement. The designed of this applience approximates the anatomicalshape of femur. The fenestrated stem permits packing of bone grafts and bonyingrowth for improved fixation. The availability of head sizes in fractional and millimeterincrements offers, the surgeon a wide selection for a more accurate fit to theacetabulum. The stem shape as well as the fin along, the outer side helps to preventrotation of the prosthesis. The loop at the top of stem is provided for extracting thestem. The prosthesis feature has a 135º degree stem/neck angle for an anatomicreconstruction.
A-67
Material : Certified Stainless Steel according to ASTM F.138ISO 5832/1. Available in titanium according to ASTM F.136ISO 5832/3 and Co.Cr-alloy according to ASTM F.75ISO 5832/4
Moore Hip Prosthesis, Solid Stem
Hüftprothese nach Moore, vollschaft
Prothèse de Moore, tige pleine
Indication : The solid stem Moore prostheses are exact duplicates of the regularstems respectively, eccept that fenestration in the stem have been filled in for thesurgeon who wishes to use with bone cement. It is totally designed for cementedapllication. The availability of head sizes in fractional and millimeter increments offers,the surgeon a wide selection for a more accurate fit to the acetabulum. The stemshape as well as the fin along, the outer side helps to prevent rotation of the prosthesis.The loop at the top of stem is provided for extracting the stem. The prosthesis featurehas a 135º degree stem/neck angle for an anatomic reconstruction. L
ØD
Head SizesDiameter
D mm
38 mm39 mm40 mm41 mm42 mm43 mm44 mm45 mm46 mm47 mm48 mm49 mm50 mm51 mm52 mm53 mm54 mm55 mm56 mm57 mm58 mm
StemLengthL mm A mm B mm C mm
Ref. NumberCo.Cr-alloy
Ref. NumberTitanium
102020110381020201103910202011040102020110411020201104210202011043102020110441020201104510202011046102020110471020201104810202011049102020110501020201105110202011052102020110531020201105410202011055102020110561020201105710202011058
Ref. NumberStainless Steel
102020120381020201203910202012040102020120411020201204210202012043102020120441020201204510202012046102020120471020201204810202012049102020120501020201205110202012052102020120531020201205410202012055102020120561020201205710202012058
102020130381020201303910202013040102020130411020201304210202013043102020130441020201304510202013046102020130471020201304810202013049102020130501020201305110202013052102020130531020201305410202013055102020130561020201305710202013058
130““““““““
150“““““““““““
25,50““““““““
27“““““““““““
44““““““““
45“““““““““““
38““““““““““““““““““““
Section of Monoblock Hip Prosthesescemented
A-68
Moore Hip ProsthesisComplete Instrumentation Set
Ref. Number : 18003110001
DescriptionRef.Number Pieces
LongShort
500gr
111111111
106100110061061001100710605021001106070200031060610000110611011002106100010011060701100210608021011
Moore RaspMoore RaspMoore Mortising ChiselFemoral Head ImpactorFemoral Head ExtractorUniversal Head ExtractorRasp BarHammerGauge for Femoral Head
A-69
Moore Rasps
Moore Mortising Chisel
Hammer(500gr)
Ref. Number10607011002
Ref. Number10605021001
Ref. Number10611011002
Universal Driver Extractor
Ref. Number
1061001100610610011007
LongShort
Size
Ref. Number10607020003
Modular Head Impactor
Femoral Head Extractor
Ref. Number10606100001
Rasp Bar
Ref. Number10610001001
Gauge for Femoral Head
Ref. Number10608021011
A-70
Material : Certified Stainless Steel according to ASTM F.138ISO 5832/1 Available in titanium according to ASTM F.136ISO 5832/3 and Co.Cr-alloy according to ASTM F.75ISO 5832/4
Moore Hip Prosthesis, Narrow Stem
Hüftprothese nach Moore, schmalschaft
Prothèse de Moore, tige étroite
Head SizesDiameter
D mm
38 mm39 mm40 mm41 mm42 mm43 mm44 mm45 mm46 mm47 mm48 mm49 mm50 mm51 mm52 mm53 mm54 mm55 mm56 mm57 mm58 mm
StemLengthL mm
140““““““““
152“““““““““““
A mm
24““““““““
25“““““““““““
B mm
43““““““““
44“““““““““““
C mm
34““““““““““““““““““““
102030030011020300300210203003003102030030041020300300510203003006102030030071020300300810203003009102030030101020300301110203003012102030030131020300301410203003015102030030161020300301710203003018102030030191020300302010203003021
Ref. NumberCo.Cr-alloy
102030020011020300200210203002003102030020041020300200510203002006102030020071020300200810203002009102030020101020300201110203002012102030020131020300201410203002015102030020161020300201710203002018102030020191020300202010203002021
Ref. NumberTitanium
102030010011020300100210203001003102030010041020300100510203001006102030010071020300100810203001009102030010101020300101110203001012102030010131020300101410203001015102030010161020300101710203001018102030010191020300102010203001021
Ref. NumberStainless Steel
L
ØD
Indication : The narrow stem Moore hip prosthesis is designed to use when themedullary canal is to small to accept the standard Moore hip prosthesis. This prosthesishas the same features as the standard stem but is narrower then the regular stemin the medial/lateral direction. The designed of this applience approximates theanatomical shape of femur. The fenestrated stem permits packing of bone grafts andbony ingrowth for improved fixation. The availability of head sizes in fractional andmillimeter increments offers, the surgeon a wide selection for a more accurate fit tothe acetabulum. The stem shape as well as the fin along, the outer side helps toprevent rotation of the prosthesis. The loop at the top of stem is provided for extractingthe stem. The prosthesis feature has a 135º degree stem/neck angle for an anatomicreconstruction.
Section of Monoblock Hip Prosthesescemented
A-71
Narrow Stem Moore Hip ProsthesisComplete Instrumentation Set
DescriptionRef.Number Pieces
LongShort
500gr
111111111
106100110181061001101910605021011106070200031060610000110611011002106100010011060701100210608021011
Narrow Stem Moore RaspNarrow Stem Moore RaspNarrow Moore Mortising ChiselFemoral Head ImpactorFemoral Head ExtractorUniversal Head ExtractorRasp BarHammerGauge for Femoral Head
Ref. Number : 18003120001
A-72
Narrow Stem Moore Rasps
Narrow Moore Mortising Chisel
Hammer(500gr)
Ref. Number10607011002
Ref. Number10605021011
Ref. Number10611011002
Universal Driver Extractor
Ref. Number
1061001101810610011019
LongShort
Size
Ref. Number10607020003
Modular Head Impactor
Femoral Head Extractor
Ref. Number10606100001
Rasp Bar
Ref. Number10610001001
Gauge for Femoral Head
Ref. Number10608021011
A-73
Material : Certified Stainless Steel according to ASTM F.138ISO 5832/1 Available in titanium according to ASTM F.136ISO 5832/3 and Co.Cr-alloy according to ASTM F.75ISO 5832/4
Thompson Hip Prosthesis
Hüftkopfprothese nach Thompson
Prothèse de Thompson
Indication : Used for replacement of the degenerated femoral head. The wedge ofthe stem provides great resistance to rotation and its broad collar gives excellentweight distribution on the calcar.The availability of head sizes in fractional andmillimeter increments offers the surgeon a wide selection for a more accurate fit tothe acetabulum. The Curved Trapezoidal Stem resists rotation. The prosthesisfeatures has a 135º degree stem/neck angle for an anatomic reconstruction.
Head SizesDiameter
D mm
38 mm39 mm40 mm41 mm42 mm43 mm44 mm45 mm46 mm47 mm48 mm49 mm50 mm51 mm52 mm53 mm54 mm55 mm56 mm57 mm58 mm
StemLengthL mm A mm B mm
Ref. NumberCo.Cr-alloy
Ref. NumberTitanium
102010010011020100100210201001003102010010041020100100510201001006102010010071020100100810201001009102010010101020100101110201001012102010010131020100101410201001015102010010161020100101710201001018102010010191020100102010201001021
Ref. NumberStainless Steel
102010020011020100200210201002003102010020041020100200510201002006102010020071020100200810201002009102010020101020100201110201002012102010020131020100201410201002015102010020161020100201710201002018102010020191020100202010201002021
102010030011020100300210201003003102010030041020100300510201003006102010030071020100300810201003009102010030101020100301110201003012102010030131020100301410201003015102010030161020100301710201003018102010030191020100302010201003021
104““““““““““““““““““““
28,5““““““““““““““““““““
46“““““““““““““““““““
L
ØD
Section of Monoblock Hip Prosthesescemented
A-74
Thompson Hip ProsthesisComplete Instrumentation Set
Ref. Number : 18003070001
DescriptionRef.Number Pieces
106100010011061001100110607020003106061000011060521000410608021011
111111
Rasp BarThompson RaspImpactorFemoral Head ExtractorCuretteGauge for Femoral Head
A-75
Impactor
Femoral Head Extractor
Curette
Thompson Rasp
Rasp Bar
Ref. Number10607020003
Ref. Number10605210004
Ref. Number10610011001
Ref. Number10610001001
Gauge For Femoral Head
Ref. Number10608021011
Ref. Number10606100001
A-76
Material : Certified Stainless Steel according to ASTM F.138 - ISO 5832/1
Müller Type Hip Prosthesis
Hüftkopfprothese nach Müller
Prothèse de Müller
Indication : The standard stem configuration will match %90 of all indications. Thereare 3 different neck lengths which allow implantation without removal of the greatertrochanter. This curved stem is designed to provide the greatest metal strengthlaterally where strength is needed most. Also the structured surface offers maximumcement/stem interface. The tapered shaft helps permit easy removal, if removalbecomes necessary.Müller type hip prostheses with a 32 mm/28 mm diameter headin combination with the ultra-high moleculer weight (U.H.M.W.P.E.) polyethylene cupprovides for an exceptionally stable total hip replacement. The eliptical neck allowsfor greater clearance and flexion, and the collar is recessed at the base to providegreater surface area contact for the cement. The prosthesis feature has a 135ºdegree stem/neck angle for an anatomic reconstruction.
L
C
ØD
Head SizesDiameter
D mm
32 mm32 mm32 mm28 mm28 mm28 mm
StemLengthL mm A mm B mm
102040010011020400100210204001003102042810041020428100510204281006
Ref. NumberStainless Steel
111111111111111111
272727272727
363636363636
NeckLengthC mm
28 mm34 mm40 mm28 mm34 mm40 mm
Section of Monoblock Hip Prosthesescemented
A-77