service note - engineering and consulting services for motors and generators_9akk105627_04-2012
TRANSCRIPT
-
7/29/2019 Service Note - Engineering and Consulting Services for Motors and Generators_9AKK105627_04-2012
1/2
Service note
Engineering and consulting servicesfor motors and generators
ABBs engineering and consult-ing services cover the entire
life cycle of motors and gen-erators.These services delivercustomized solutions that notonly cover management relateddecisions, but also addresstechnical issues such as diag-nostics, prognostics, load opti-
mization and troubleshooting.
Offering Description Deliverables Benefits
Energy efficiency
and reliability
appraisals
Help determine opportunities for energy and mainte-
nance cost savings
Life cycle costing approach used to evaluate potential
long-term savings if assets providing higher efficiency
and reliability are installed
Recommendations are provided, backed by payback
calculations
Energy consumption reduction
Energy savings analysis with
possible replacement motor
Reliability analysis to estimate
maintenance costs
Indication of payback through en-
ergy and maintenance savings
Free of charge
No stoppage of motor
required
No downtime for analysis
Advanced
condition and
performance
assessments
Performance is studied to assess if the equipment is
operating as designed
Asset performance can be defined in terms of capac-
ity, torque-speed curves, transient and steady state
behavior, efficiency and losses, power factor, etc.
When problems occur, on-site performance measure-
ments help close the gap between reality and
perception
Decisions backed by performance measurements are
more robust
The assessments address a wide range of common
problems
(Recalculated) asset performance
curves
Loss estimations
Motor-drive compatibility analysis
Load inertia calculations
Root cause analysis and trouble-shooting
Assessment of upgrades
Analysis of sta rting perfo rmance
Make your decisions
backed by expert
knowledge
Solutions for a wide range
of problems
-
7/29/2019 Service Note - Engineering and Consulting Services for Motors and Generators_9AKK105627_04-2012
2/2
9AKK105627
EN0
4-2012
We reserve the right to make technical changes or modify the contents of this
document without prior notice. With regard to purchase orders, the agreed
particulars shall prevail. ABB Ltd does not accept any responsibility whatsoever
for potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations
contained herein. Any reproduction, disclosure to third parties or utilization of
its contents in whole or in part is forbidden without prior written consent of
ABB Ltd.
Copyright 2012 ABB, All rights reserved
For more information please contact:
www.abb.com/motors&generators
Benefits
Maximized availability and reliability
Extended lifetime through use of most appropriate mainte-
nance practices
Minimized unplanned downtime
Controlled risks and costs associated with maintenance
Access to solutions based on patented and special ized
technology
Single source for consulting services and implementation
of solutions
With more than 100 years of experience in motor and genera-
tor manufacturing and servicing, ABB provides customized
solutions to optimize availability, reliability, maintainability and
safety.