signal conditioners - m-system · m2sn input loop powered isolator p.010 m2xu universal transmitter...

001ISP ’12

Signal Conditioners

Converting a field signal suitable for processing after conditioning

Available with wide combination of process signal I/O, power input and mounting configuration.

Additionally, M-System offers the broadest line of signal splitters available.

✔ Signal Conversion✔ Signal Boosting (increases load drive capability)✔ Signal Isolation (stops ground loops)

M2SN,M2XU,M2XUM,M2XV2,M2LV,M2VS,M2FV,M2VF,M2VF2,M2VF3,M2VV,M2XT2,M2TS,M2XR2,M2LR,M2RS,M2RR,M2XM2,M2L

PM,M2MS,M2LCS,M2TG,M2AC,M2PA,M2PE,M2CA,M2CE,M2CEC,M2D,M2D2,M2DYS,M2DY,M2DL,M2DNY,M2DYH2,M2DYH,M2DY

HR,M2DU,M2PV,M2AVS,M2SED,M2AS,M2AS1,M2XPA3,M2SP,M2XRP2,M2AP,M2PP,M2PRU,M2ADS,M2SBS,M2MLS,M2DIS,M2REB

,M2RTS,M2XF2,M2FL,M2FLS,M2LMS,M2UDS2,M2UDS,M2CDS,M2CRS,M2AMS2,M2AMS,M2PHS2,M2PHS,M2SES2,M2SES,M2MNV

,M2MST,M2BS-16,M2BS-8,M2BS2,M2BC,M2BD,P-M2,M2BW,M2DM

Data sheets available on Web in PDF. Visit M-System Data Library at www.m-system.co.jp ISP ’12

A

008

008 Compact Plug-in

Mini-M SeriesSignal Conditioners

Two-wire Signal Conditioners

Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O

Paperless RecordingSystem

PC Recorder

Electric Actuators& Position Sensors

Lightning Surge Protectors

Signal ConditionersProduct Selection Guide

Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series

EXTERNAL DIMENSIONS mm (inch)

5

9

21.5 (.85)

70.5

(2.78

)

84 (3.31)10 (.39) 15 (.59)

6 (.23)

59 (2

.32)

DIN RAIL35mm wide

[4 (.16)]

8–M3SCREW

72 (2

.83)

23 (.91)

2–4.2x5(.17x.20)

MTG HOLE6 (.24) deep

114 (4.49)

• When mounting, no extra space is needed between units.

48

1214 13

1

4 (.16

)

Construction Plug-in

Connection M3 screw terminals (torque 0.8 N·m)

Housing material Flame-resistant resin (black)

Isolation Input to output to power

Operating temperature -5 to +55°C (23 to 131°F)

Mounting Surface or DIN rail

Dielectric strength 2000V AC @1 minute (input to output to power to ground)

AC power input Operational voltage range 85 – 264V (90 – 264V for UL)

DC power input Operational voltage range for 24V ±10%, 11 – 27V, or 85 – 150V (110V ±10% for UL)

8-pin Mounted Modules

M2 Series Signal Conditioners are designed to accept a largest range of process signal inputs and provide a standard and non-standard DC output.

◆ M2 use a compact-size, plug-in socket base for quick installation or replacement of modules with-out disturbing wiring.

◆ 2000V AC isolation

◆ Standard DIN rail or surface mounting

◆ Base socket included with modules

◆ Selectable 100–240V AC/24V DC power input

◆ Fixed range or PC programmable models selectable

◆ CE marking and UL/C-UL Class 1 Div 2 approval (selected models)

SPECIFICATIONS

n DC Inputs, Isolators

Model Function Page

M2SN Input Loop Powered Isolator P.010

M2XU Universal Transmitter (PC programmable) P.012

M2XUM Universal Transmitter (PC programmable; Modbus-RTU communication) P.014

M2XV2 Signal Transmitter (PC programmable) P.016

M2LV Signal Transmitter (field- and PC-configurable) P.018

M2VS Signal Transmitter P.019

M2FV Signal Transmitter (field-configurable) P.020

M2VF Signal Transmitter (high speed response) P.021

M2VF2 Signal Transmitter (ultra-high speed response 30μsec.) P.022

M2VF3 Signal Transmitter (high-accuracy, ultra-high speed response 30 μsec.) P.023

M2VV Voltage Divider P.024

n Temperature & Sensor Inputs

Model Function Page

M2XT2 Thermocouple Transmitter (PC programmable) P.026

M2TS Thermocouple Transmitter P.028

M2XR2 RTD Transmitter (PC programmable) P.030

M2LR RTD Transmitter (field- and PC-configurable) P.032

M2RS RTD Transmitter P.033

M2RR Resistance/Resistance Converter P.034

M2XM2 Potentiometer Transmitter (PC programmable) P.035

M2LPM Potentiometer Transmitter (field- and PC-configurable) P.036

M2MS Potentiometer Transmitter P.037

M2LCS Strain Gauge Transmitter P.038

M2TG Tachogenerator Transmitter P.039

M2AC AC Transmitter P.040

M2PA PT Transmitter (average sensing, RMS calibrated) P.041

Specifications are subject to change without notice.ISP ’12

A

009

009Compact Plug-in Mini-M SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Signal Conditioners

Mini-M Series

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

Rack-mounted

10-RACK Series

18-RACK Series

38-RACK Series

To find a product in the list with “***”, visit M-System Data Library.If you cannot find a product here, please contact: [email protected]

Model Function Page

M2PE PT Transmitter (RMS sensing) P.042

M2CA CT Transmitter (average sensing, RMS calibrated) P.043

M2CE CT Transmitter (RMS sensing) P.044

M2CEC AC Current Transmitter (clamp-on current sensor) P.046

n DC Supplies

Model Function Page

M2D Current Loop Supply (non-isolated) P.048

M2D2 Current Loop Supply (non-isolated) P.049

M2DYS Current Loop Supply P.050

M2DY Current Loop Supply P.051

M2DL Current Loop Supply (with square root extractor; non-isolated) P.052

M2DNY Current Loop Supply (with square root extractor) P.053

M2DYH2 Current Loop Supply (applicable to HART signal) P.054

M2DYH Current Loop Supply (applicable to HART signal) P.055

M2DYHR Current Repeater (applicable to HART signal) P.056

M2DU Current Loop Supply (10-50mA loop) P.057

n Pneumatic Transducers

Model Function Page

M2PV P/I Transducer P.058

n Limit Alarms

Model Function Page

M2AVS DC Alarm P.060

M2SED DC Alarm (thumbwheel switch adjustments) P.062

M2AS DC Alarm (thumbwheel switch adjustments; DPDT output) P.063

M2AS1 DC Alarm (thumbwheel switch adjustments; single SPDT output) P.064

n Frequency I/O

Model Function Page

M2XPA3 Frequency Transmitter (PC programmable) P.066

M2SP Low Frequency Transmitter (50 Hz minimum) P.068

M2XRP2 Encoder Speed Transmitter (PC programmable; built-in excitation) P.070

M2AP DC/Frequency Converter P.072

M2PP Pulse Isolator P.074

M2PRU Pulse Scaler (field-configurable) P.076

n Function Modules

Model Function Page

M2ADS Adder P.078

M2SBS Subtractor P.079

M2MLS Multiplier P.080

M2DIS Divider P.081

M2REB Ratio/Bias Transmitter (output bias) P.082

M2RTS Ratio/Bias Transmitter (input bias) P.084

M2XF2 Linearizer (PC programmable) P.086

M2FL Square Root Extractor (non-isolated) P.088

M2FLS Square Root Extractor (3-port isolation) P.089

M2LMS Limiter P.090

M2UDS2 Inverted Output Transmitter (with simple loop test output) P.091

M2UDS Inverted Output Transmitter P.092

M2CDS Delay Buffer P.093

M2CRS Ramp Buffer P.094

M2AMS2 Track/Hold (with simple loop test output) P.095

M2AMS Track/Hold P.096

M2PHS2 Peak Hold (with simple loop test output) P.097

M2PHS Peak Hold P.098

M2SES2 High/Low Selector (with simple loop test output) P.100

M2SES High/Low Selector P.101

M2MNV Analog Switching Module P.102

M2MST Parameter Generator P.104

n Installation Base

Model Function Page

M2BS-16 Installation Base (16 positions) ***M2BS-8 Installation Base (8 positions) ***M2BS2 Installation Base ***

M2BC Communication Controller (Mitsubishi Control & Communication Link use) ***

M2BD Communication Controller (DeviceNet use) ***

n Accessories

Model Function Page

P-M2 Socket Cover, M2BS use ***M2BW Extender Module ***M2DM Blank Filler Module ***

W2VS,W2VF,W2XT,W2TS,W2XR,W2RS,W2XM,W2MS,W2TG,W2AC

,W2PA,W2PE,W2CA,W2CE,W2DYS,W2DY,W2DNY,W2DYH,W2PV,

W2SP,W2AP,W2PP,W2XF,W2VABS


A

106

106 Compact Plug-in Signal Splitters

Mini-MW SeriesFour-wire Signal ConditionersSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series


4

8 710

23 (.91)

89 (3

.50)

84 (3.31)10 (.39)

22 (.87)

59 (2

.32)

DIN RAIL35mm wide

[4 (.16)]

11–M3SCREW

72 (2

.83)

29.5 (1.16)

53 (2

.09)

2–4.2x5(.17x.20)

MTG HOLE6 (.24) deep

114 (4.49)

11

56123

9

6 (.23)


Construction Plug-in

Connection M3 screw terminals (torque 0.8 N·m)


Isolation Input to output 1 to output 2 to power


Mounting Surface or DIN rail

Dielectric strength 2000V AC @1 minute (input to output 1 to output 2 to power to ground)

AC power input Operational voltage range 85 – 264V (90 – 264V for UL)

DC power input Operational voltage range for 24V ±10%, 11 – 27V, or 85 – 150V (110V ±10% for UL)

The W2 Series Signal Splitters provide two isolated outputs of independent ranges.

◆ W2 use a compact-size, plug-in socket base for quick installation or replacement of modules without disturbing wiring.


◆ Standard DIN rail or surface mounting

◆ Base socket included with modules

◆ Selectable 100–240V AC/24V DC power input

◆ Fixed range or PC programmable models selectable

◆ CE marking and UL/C-UL Class 1 Div 2 approval (selected models)

SPECIFICATIONS

n DC Inputs

Model Function Page

W2VS Signal Transmitter P.107

W2VF Signal Transmitter (high speed response) P.108

n Temperature & Sensor Inputs

Model Function Page

W2XT Thermocouple Transmitter (PC programmable) P.110

W2TS Thermocouple Transmitter P.112

W2XR RTD Transmitter (PC programmable) P.114

W2RS RTD Transmitter P.116

W2XM Potentiometer Transmitter (PC programmable) P.118

W2MS Potentiometer Transmitter P.119

W2TG Tachogenerator Transmitter P.120

W2AC AC Transmitter P.121

W2PA PT Transmitter (average sensing, RMS calibrated) P.122

W2PE PT Transmitter (RMS sensing) P.123

W2CA CT Transmitter (average sensing, RMS calibrated) P.124

W2CE CT Transmitter (RMS sensing) P.125

n DC Supplies

Model Function Page

W2DYS Current Loop Supply P.126

W2DY Current Loop Supply P.127

W2DNY Current Loop Supply (with square root extractor) P.128

W2DYH Current Loop Supply (applicable to HART signal) P.129

n Pneumatic Transducers

Model Function Page

W2PV P/I Transducer P.130

n Frequency I/O

Model Function Page

W2SP Low Frequency Transmitter (50 Hz minimum) P.131

W2AP DC/Frequency Converter P.132

W2PP Pulse Isolator P.134

n Function Modules

Model Function Page

W2XF Linearizer (PC programmable) P.136

W2VABS Absolute Value Output Transmitter P.137

M6SSN,M6SYV,M6SSU,M6SSV,M6SVS,M6SVF,M6SWVS,M6SST,M6SSR,M6SSM,M6SDY,M6SCTC,M6SPA,M6SSAP,M6SPP,M6SSAS,M6SSAT,M6S

SAR,M6SSF1,M6SSF2,M6SSF3,M6SBS,M6SPS1,M6SPS2,M6-PSM,M6SDM,M6NSN,M6NYV,M6NNU,M6NNV,M6NVS,M6NVF,M6NWVS,M6NNT,M

6NNR,M6NNM,M6NDY,M6NCTC,M6NPA,M6NNAP,M6NPP,M6NNAS,M6NNAT,M6NNAR,M6NNF1,M6NNF2,M6NNF3,M6NBS,M6NPS1,M6NPS2,

M6NDM,M6DSN,M6DYV,M6DDU,M6DDV,M6DVS,M6DVF,M6DWVS,M6DDT,M6DDR,M6DDM,M6DDY,M6DCTC,M6DPA,M6DDAP,M6DPP,M6DDA

S,M6DDAT,M6DDAR,M6DDF1,M6DDF2,M6DDF3,M6DBS,M6DPS1,M6DPS2,M6DDM


A

138

138 Ultra-Slim

M6 SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series

Tension-Clamp(M6S Series)

Screw Terminal(M6N Series)

Euro Terminal(M6D Series)

Construction Ultra-slim

ConnectionM6S: Tension clampM6N: M3 screw terminal (torque 0.5 N·m) M6D: Euro terminal (torque 0.3 N·m)


Isolation Input to output to power/ Input to output 1 to output 2 to power

Operating temperature -20 to +55°C (-4 to +131°F)

Mounting DIN rail


AC Power input Operational voltage range 90 – 264V (M6xXU, M6xYV, M6xVS)

DC Power input Operational voltage range 24V ±10%

5.9mm (0.23”)

7.5mm (0.30”)

5.9mm (0.23”)

Ultra-slim, Space saving, Low power consumption. High performance transmitters with wide selection of input and output ranges.

◆ Selectable connection method – Tension-Clamp, Screw terminal or Euro terminal.

◆ Output load resistance 550Ω (at 4–20mA DC)

◆ Low power consumption

◆ Front power LED provided

◆ Fixed range or PC programmable models selectable. User-friendly versatile programming features provided.

◆ Status LED for PC programmable models.


◆ Optional fast response: Approx. 3.5 msec, voltage output (M6xYV)

◆ AC Power input available (M6xXU, M6xYV, M6xVS)

SPECIFICATIONS

Model Function Page

M6xPP Pulse Isolator P.162

M6xXAS DC Alarm (PC programmable) P.164

M6xXAT Thermocouple Alarm (PC programmable) P.166

M6xXAR RTD Alarm (PC programmable) P.168

M6xXF1 Function Module (PC programmable) P.170

M6xXF2 2-input Math Function Module (PC programmable) P.174

M6xXF3 Hold Function Module (PC programmable) P.176

n Accessories

Model Function Page

M6xBS Installation Base P.178

M6xPS1 Power Supply Module P.179

M6xPS2 Power Supply Module (dual redundant) P.180

M6-PSM Power Supply Module P.181

M6xDM Blank Filler Module P.182

x=S, N or D x=S, N or D

x=S, N or D

Model Function Page

M6xSN Input Loop Powered Isolator P.141

M6xYV Isolator P.142

M6xXU Universal Transmitter (PC programmable) P.144

M6xXV Signal Transmitter (PC programmable) P.146

M6xVS Signal Transmitter P.148

M6xVF Signal Transmitter (high-accuracy, ultra-high speed response 30 μsec.) P.149

M6xWVS Signal Transmitter (two isolated outputs) P.150

M6xXT Thermocouple Transmitter (PC programmable) P.152

M6xXR RTD Transmitter (PC programmable) P.154

M6xXM Potentiometer Transmitter (PC programmable) P.156

M6xDY Current Loop Supply P.157

M6xCTC CT Transmitter (clamp-on current sensor) P.158

M6xPA Frequency Transmitter P.159

M6xXAP DC/Frequency Converter (PC programmable) P.160


A

139

139Ultra-Slim M6 SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Signal Conditioners

Mini-M Series

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

Rack-mounted

10-RACK Series

18-RACK Series

38-RACK Series

n Euro Terminal Ultra-Slim Signal Conditioners M6D Series

n Screw Terminal Ultra-Slim Signal Conditioners M6N Series

◆ 5.9 mm (0.23”) wide ultra-slim design

◆ Space saving euro type terminal


◆ Self-up screw style prevents falling off a terminal

n Tension-Clamp Ultra-Slim Signal Conditioners M6S Series


◆ Spring terminal provides constant force, eliminating torque management, maintenance- free for retightening




102 (

4.02)

7.5 (.30)

DIN RAIL HOOK

102 (4.02)[1 (.04)]

8–M3SCREW TERMINAL

DIN RAIL35mm wide

5 6 7 8

1 2 3 4


94 (3

.70)

5.9 (.23)

DIN RAIL HOOK

102 (4.02)[0.5 (.02)]

8–M3EURO TERMINAL

DIN RAIL35mm wide

5 6 7 8

1 2 3 4


94 (3

.70)

5.9 (.23)

DIN RAIL35mm wide

DIN RAIL HOOK

102 (4.02) [0.5 (.02)]

5 6 7 8

1 2 3 4



A

140

140 Ultra-Slim M6 Series

Power supply module (Model : M6xPS1)orFor redundant power supplies (Model : M6xPS2)

Installation Base(Model : M6xBS)

Max. 48 modules

9.5 cm(3.75”)

Power supply through the backplane bus 16 modules in a 9.5 cm- (3.75 in.-) wide space (M6S/M6D)

Less than 30 cm (12 in.) with 48 modules (M6S/M6D)

49 (1.93)37 (1.46)

11.5 (.45)

3–4.5 (.18) dia. MTG HOLE2 (.08) deep

99 (3

.90)

70 (2

.76)

5 (.20

)5 (

.20)

14

(.55)

27 (1.06) [5 (.20)]

22.5 (.89)116 (4.57)

[3 (.12)]

14 (.55)

49 (1

.93)

DIN RAIL35mm wide

11.5 (.45)

101 (

3.98)

72 (2

.83)

5 (.20

)5 (

.20)

14

(.55)

61.6 (2.43) [3 (.12)]3–4.5 (.18) dia.MTG HOLE2 (.08) deep

49.8 (1.96)

[5 (.20)]

2 (.08

)51

(2.01

)

22.5 (.89)116 (4.57)

DIN RAIL35mm wide

27 (1.06)

18 (.7

1)

49 (1.93)37 (1.46)

11.5 (.45)

3–4.5 (.18) dia. MTG HOLE2 (.08) deep

99 (3

.90)

70 (2

.76)

5 (.20

)5 (

.20)

14

(.55)

27 (1.06) [5 (.20)]

22.5 (.89)116 (4.57)

[3 (.12)]

14 (.55)

49 (1

.93)

DIN RAIL35mm wide

11.5 (.45)

101 (

3.98)

72 (2

.83)

5 (.20

)5 (

.20)

14

(.55)

61.6 (2.43) [3 (.12)]3–4.5 (.18) dia.MTG HOLE2 (.08) deep

49.8 (1.96)

[5 (.20)]

2 (.08

)51

(2.01

)

22.5 (.89)116 (4.57)

DIN RAIL35mm wide

27 (1.06)

18 (.7

1)

n M6DBS

11.5 (.45)

99 (3

.90)

70 (2

.76)

5 (.20

)5 (

.20)

14

(.55)

37 (1.46) 3–4.5 (.18) dia.MTG HOLE2 (.08) deep

49 (1.93) [3 (.12)]

14 (.55)

22.5 (.89)116 (4.57)

27 (1.06) [5 (.20)]

49 (1

.93)

DIN RAIL35mm wide

11.5 (.45)

99 (3

.90)

70 (2

.76)

5 (.20

)5 (

.20)

14

(.55)

37 (1.46) 3–4.5 (.18) dia.MTG HOLE2 (.08) deep

49 (1.93) [3 (.12)]

14 (.55)

22.5 (.89)116 (4.57)

27 (1.06) [5 (.20)]

49 (1

.93)

DIN RAIL35mm wide

n M6NBSn M6SBS

Signal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series

n Installation Base model: M6xBS

◆ Power supplied to signal conditioners from the power supply module (via the installation base). Spring terminal provides constant force, eliminating torque management, maintenance- free for retightening

◆ High-density mounting: 16 units (M6D) in a space of 9.5 cm (3.75”)

◆ Holding up to 48 modules of M6 Series using 6 installation bases.


M5SN,M5VS,M5MV,M5VF,M5VSH,M5TS,M5RS,M5MS,

M5DY,M5PT,M5CT,M5CTC,M5PA


A

184

184 Low Profile

M5-UNIT SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series


Construction Terminal block

Connection M3.5 screw terminals (nickel-plated steel; torque 0.8 N·m)




Power LED Green light turns on when the power is supplied

Mounting DIN rail

Dielectric strength DC powered AC powered High dielectric strength

Input to output to power to ground2000V AC @1 minute 1500V AC @1 minute 2000V AC @1 minute (model: M5VSH)

AC power input Operational voltage range 85 – 264V

DC power input Operational voltage range for 24V ±10%

94 (3

.70)

3 (.12

)

25 (.98) 41 (1.61) [3.3 (.13)]


DIN RAIL35mm wide

8–M3.5 SCREW7.3 (.29)

1 2

3 4

5 6

7 8

35.4

(1.3

9)

M-System's M5 Series Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.

◆ Only 41 mm (1.61 in") deep modules can be installed anywhere, even behind the panel cover

◆ The M5 Series features single channel four-wire models

◆ Standard DIN rail mounting

◆ 2000V AC isolation (1500V AC for AC powered)

◆ Selectable power input 24V DC, 85–264V AC

◆ Power indicator LED

SPECIFICATIONS

Model Function Page

M5SN Input Loop Powered Isolator P.185

M5VS Signal Transmitter P.186

M5MV Signal Transmitter (narrow span input) P.187

M5VF Signal Transmitter (high speed response) P.188

M5VSH Signal Transmitter (high dielectric strength) P.189

M5TS Thermocouple Transmitter P.190

M5RS RTD Transmitter P.192

M5MS Potentiometer Transmitter P.193


M5PT PT Transmitter P.195

M5CT CT Transmitter P.196

M5CTC CT Transmitter (clamp-on current sensor) P.198

M5PA Frequency Transmitter P.200

W5VS,W5FV,W5TS,W5RS,W5MS,W5DY,W5LCS,W5PA


A

202

202 Low Profile Signal Splitters

W5-UNIT SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series


Construction Terminal block

Connection Input Output & Power

M3.5 screw terminals (torque 0.8 N·m)M3 screw terminals (torque 0.8 N·m)


Isolation Input to output 1 to output 2 to power


Mounting DIN rail

Dielectric strength2000V AC @1 minute (input to output 1 or output 2 to power to ground)1000V AC @1 minute (output 1 to output 2)

AC power input Operational voltage range 85 – 264V

DC power input Operational voltage range for 24V ±10%, 11 – 27V, or 85 – 150V

54321

11109876

94 (3

.70)

45 (1.77) 41 (1.61) [3.3 (.13)]


DIN RAIL35mm wide

5–M3.5 SCREW7.4 (.29)

6–M3 SCREW

6 (.24)

3 (.12

)

◆ Only 41 mm (1.61 in") deep modules can be installed anywhere, even behind the panel cover

◆ The W5 Series signal splitters provide two isolated DC outputs of independent ranges

◆ Standard DIN rail mounting


◆ Selectable power input 11–27 V DC, 85–264V AC, 110V DC

W5 Series Dual Output Transmitters are designed to accept a wide variety of process signal input and provide a standard and non-standard DC output.

SPECIFICATIONS

Model Function Page

W5VS Signal Transmitter P.203

W5FV Signal Transmitter (field-configurable) P.204

W5TS Thermocouple Transmitter P.206

W5RS RTD Transmitter P.208

W5MS Potentiometer Transmitter P.209

W5DY Current Loop Supply P.210

W5LCS Strain Gauge Transmitter P.211

W5PA Frequency Transmitter P.212

M3SYV,M3SXV,M3SVS,M3SWVS,M3SXT,M

3SXR,M3SRS,M3SXM,M3SMS,M3SDY


A

214

214 Thin Profile

M3-UNIT SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series


Construction Front terminal access

Connection Removable terminal block

Housing material Flame-resistant resin (gray)


Calibration One-Step Cal

Status indicator LED Tri-color (green/amber/red) LED

Operating temperature-25 to +65°C (-13 to +149°F) -25 to +60°C (-13 to +140°F) (M3LU2)Max. 55°C (131°F) for UL approval

Mounting DIN rail

Dielectric strength

AC powered (M3LU2, M3LU, M3DY): 2000V AC @1 minute (input to output to power to ground)DC powered: 1500V AC @1 minute (input to output or power to ground) 500V @1 minute (output to power)

Power input

AC Operational voltage range 85 – 264V AC (M3LU2, M3LU, M3LPA2)

DC Operational voltage range 9 – 36V DCOperational voltage range 24V DC ±10% (M3LDY)

Universal (M3DY)

AC: Operational voltage range 90 – 264V 47 – 66 Hz

DC: Operational voltage range 21.6 – 264V, 24V ±10%

10 11 12

7 8 9

4 5 6

1 2 3

106 (

4.17)

18 (.71) 110.5 (4.35)

62 (2

.44)

[5 (.20)]


DIN RAIL35mm wide

PC Programmable; “ONE-STEP CAL” Programming Without Needing a PC is also available. ◆ Easy and precise field configurable I/O ranges

◆ Enhanced PC Configurator Software


◆ 18 mm (0.71”) thin profile DIN rail mounting

SPECIFICATIONS

Model Function Page

M3LU2 Universal Transmitter (field- and PC-configurable) P.216

M3LU Universal Transmitter (field- and PC-configurable) P.218

M3LV Signal Transmitter (field- and PC-configurable) P.220

M3LT Thermocouple Transmitter (field- and PC-configurable) P.222

M3LR RTD Transmitter (field- and PC-configurable) P.224

M3LM Potentiometer Transmitter (field- and PC-configurable) P.226

M3LLC Strain Gauge Transmitter (field- and PC-configurable) P.227

M3LDY Current Loop Supply (linearizing; field- and PC-configurable) P.228


M3LPA2 Frequency Transmitter (field- and PC-configurable) P.232


A

215

215Thin Profile M3-UNIT SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Signal Conditioners

Mini-M Series

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

Rack-mounted

10-RACK Series

18-RACK Series

38-RACK Series

• Parameter setting is easily configured with a help of bargraphs on the screen.

• Trend graph monitoring is also possible.

• Fixed analog output can be set and provided for simulation when conducting a loop test.

• 128-point linearization and custom thermocouple/RTD tables

• Fine calibration

• Save configuration files

• Input filter

• Diagnostics

When you need to apply the same setting to multiple transmitters, downloading one setting from the PC is convenient. The PC Configurator software is available to download at M-System web site. M3 PC Configurator is packed with advanced features such as:

Both input type & range and output type & range are totally independent to each other, which makes the calibration easier and quicker than ever. Simply by pushing the front control buttons, “ONE-STEP CAL” programming is possible without requiring personnel to have any special knowledge to do so.

Sensor Information with Trend Graph Analog Output Calibration File Management (Compare)

n Enhanced PC Configurator Software

n “ONE-STEP CAL” Configuration

n EXTERNAL VIEW

Configuration DIP SW

4 5 6

■ FRONT VIEW ■ SIDE VIEW

8

SW2

SW1

SW37 6 5 4 3 2 1

ON

OFF

ON

OFF

4 3 2 1

ON

OFF4 3 2 1

10 11 12

7 8 9

Configurator Jack

DOWN Button

UP Button

MODE Button

LED3 (LD3)

LED2 (LD2)

LED1 (LD1)

LEDThe front LED’s colors and flashing patterns help you easily identify the transmitter’s status and confirm the setup actions in each step of Calibration Modes.

MODE Button

UP Button

DOWN Button

M3LU2,M3LU,M3LV ,M3LT,M3LR,M3LM,M

3LLC,M3LDY,M3DY,M3LPA2


A

234

234 Thin Profile

M3S-UNIT SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series


Construction Front terminal access

Connection Removable terminal block

Housing material Flame-resistant resin (gray)

Isolation Input to output to power/ Input to output 1 to output 2 to power


Mounting DIN rail


Power input

AC Operational voltage range 90 – 264V

DC Operational voltage range 24V DC ±10%,

Universal AC: Operational voltage range 90 – 264 V ACDC: Operational voltage range 21.6 – 264 V DC

7 8

5 6

1 2

3 4

106 (

4.17)

12(.47)

110.5 (4.35)

62 (2

.44)

[5 (.20)]


DIN RAIL35mm wide

Universal AC/DC power input models available. ◆ Super-space-saving 12mm (0.47") width

◆ Universal AC/DC power input available

◆ PC programmable models available

◆ DC input model with optional fast response time

SPECIFICATIONS

Model Function Page

M3SYV Isolator P.235

M3SXV Signal Transmitter (PC programmable) P.236

M3SVS Signal Transmitter P.237

M3SWVS Signal Transmitter (two isolated outputs) P.238

M3SXT Thermocouple Transmitter (PC programmable) P.239

M3SXR RTD Transmitter (PC programmable) P.240

M3SRS RTD Transmitter P.241

M3SXM Potentiometer Transmitter (PC programmable) P.242

M3SMS Potentiometer Transmitter P.243

M3SDY Current Loop Supply P.244

20VS1A,20VS2-1,20VS2-2,20VS2-3,20VS2-4,20VS2-01,20VS2-02,20VS3,20VS4-384,20VS5-

100,20VS5-150,20VS5-140,20VS5-170,20VS5-200,20VS5-500,20VS8-210,20VF-1,20VF-2


A

246

246 Hybrid IC Isolation Amplifiers

20 SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series

Isolation amplifiers provide signal and power isolation for data acquisition components to protect them from noises present at remote devices.

20VF-x

20VS4-384

20VS8-210

20VS3

20VS5-100, 150, 140 20VS5-170 20VS5-200 20VS5-500

20VS2-x20VS1A 20VS2-0x

Model Function

20VS1A Isolation Amplifier (high speed response, 3-port isolation)

20VS2-1 Isolation Amplifier (input isolation)

20VS2-2 Isolation Amplifier (output isolation)

20VS2-3 Isolation Amplifier (input isolation for narrow span)

20VS2-4 Isolation Amplifier (output isolation, current output)

20VS2-01 Isolation Amplifier (3-port isolation)

20VS2-02 Isolation Amplifier (3-port isolation)

20VS3 Isolation Amplifier (3-port isolation)

20VS4-384 Isolation Amplifier (5 kV input isolation)

20VS5-100 Isolation Amplifier (bidirectional amplifier)

Model Function

20VS5-150 Isolation Amplifier (input isolation)

20VS5-140 Isolation Amplifier (output isolation)

20VS5-170 Isolation Amplifier (output isolation, for current output)

20VS5-200 Isolation Amplifier (input isolation, ultra-high speed response)

20VS5-500 Isolation Amplifier (5 kV input isolation)

20VS8-210 Isolation Amplifier (high speed response, 3-port isolation)

20VF-1 Isolation Amplifier (input isolation, ultra-high speed response)

20VF-2 Isolation Amplifier (output isolation, ultra-high speed response)


A

247

247Hybrid IC Isolation Amplifiers 20 SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Signal Conditioners

Mini-M Series

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

Rack-mounted

10-RACK Series

18-RACK Series

38-RACK Series

◆ 2-port Isolation

n Input Isolation

Model Features Input Output Response Time (0 – 90 %)

Freq. Characteristics

Power Input

Dimensions mm (inch)

20VF-1 Ultra-high speed response -10 – +10V DC -10 – +10V DC ≤ 80 μsec. Approx. 5 kHz, -3 dB 15V DC W49 × H14.5 × D18 (1.93” × 0.57” × 0.71”)

20VS2-1 Built in surge protectors -10 – +10V DC -10 – +10V DC ≤ 450 μsec. Approx. 1 kHz, -3 dB 15V DC W49 × H14.5 × D18 (1.93” × 0.57” × 0.71”)

20VS2-3 Narrow span-10 – +100mV DC

0 – 10V DC≤ 200 msec. Approx. 2 Hz, -3 dB

15V DC W49 × H14.5 × D18 (1.93” × 0.57” × 0.71”)0 – 5V DC ≤ 450 μsec. Approx. 1 kHz, -3 dB

20VS4-384 Up to 5 kV input isolation -5 – +5 V DC -5 – +5 V DC ≤ 450 μsec. 1 kHz, -3 dB 15V DC W38 × H15.2 × D38 (1.50” × 0.60” × 1.50”))

20VS5-150

• Small installation area in printed wiring board

• Gain adjustable range, × 1 to × 100

@ 15 V power

≤ 90 μsec. Approx. 5 kHz, -3 dB 15V DC W53 × H24 × D18 (2.09” × 0.94” × 0.71”)

-7 – +7 V DC -7 – +7 V DC

@ 11.5 V power

-5 – +5 V DC -5 – +5 V DC

20VS5-200 Ultra-high speed response -5 – +5 V DC -5 – +5 V DC ≤ 10 μsec. Approx. 50 kHz, -3 dB 15V DC W48 × H15 × D9.5 (1.89” × 0.59” × 0.37”)

20VS5-500 Up to 5 kV input isolation -5 – +5 V DC -5 – +5 V DC ≤ 90 μsec. 5 kHz, -3 dB TYP. 15V DC W38 × H15.2 × D38 (1.50” × 0.60” × 1.50”)

n Output Isolation



Power Input


20VF-2 Ultra-high speed response -10 – +10V DC -10 – +10V DC ≤ 80 μsec. Approx. 5 kHz, -3 dB 15V DC W49 × H14.5 × D18 (1.93” × 0.57” × 0.71”)

20VS2-2 Built in surge protectors -10 – +10V DC -10 – +10V DC ≤ 450 μsec. Approx. 1 kHz, -3 dB 15V DC W49 × H14.5 × D18 (1.93” × 0.57” × 0.71”)

20VS2-4 Voltage and current output 0 – 5V DC0 – 20mA DC

≤ 2 msec. Approx. 200 Hz, -3 dB 15V DC W49 × H14.5 × D18 (1.93” × 0.57” × 0.71”)0 – 10V DC

20VS5-140Small installation area in printed wiring board

@ 15 V power


-7 – +7 V DC -7 – +7 V DC

@ 11.5 V power

-5 – +5 V DC -5 – +5 V DC

20VS5-170 Current output 0 – 5 V DC 0 – 20 mA DC ≤ 1 msec. Approx. 500 Hz, -3 dB 12V DC W44 × H10.5 × D18 (1.73” × 0.41” × 0.71”)

n Bidirectional Isolation



Power Input


20VS5-100• Small installation area in

printed wiring board• Bidirectional amplifier

@ 15 V power


-7 – +7 V DC -7 – +7 V DC

@ 11.5 V power

-5 – +5 V DC -5 – +5 V DC

◆ 3-port Isolation



Power Input


20VS1A High speed response -10 – +10 V DC -10 – +10 V DC ≤ 50 μsec. Approx. 20 kHz, -3 dB 15V DC W53.3 × H26 × D11.3 (2.1” × 1.02” × 0.44”)

20VS2-01 High-linearity -5 – +5 V DC -5 – +5 V DC ≤ 390 μsec. Approx. 1 kHz, -3 dB 15V DC W33 × H8 × D19 (1.30” × 0.31” × 0.75”)

20VS2-02 High-linearity 0 – 5 V DC 0 – 5 V DC ≤ 390 μsec. Approx. 1 kHz, -3 dB 15V DC W33 × H8 × D19 (1.30” × 0.31” × 0.75”)

20VS3 Saving installation space -5 – +5V DC -5 – +5V DC ≤ 450 μsec. Approx. 1 kHz, -3 dB 15V DC W33 × H19 × D8 (1.30” × 0.75” × 0.31”)

20VS8-210 High speed response -10 – +10 V DC -10 – +10 V DC ≤ 50 μsec. Approx. 20 kHz, -3 dB 15V DC W53.3 × H9.8 × D25.4 (2.1” × 0.39” × 1”)

SPECIFICATIONS


A

248

248 Other Signal ConditionersPico-M/ MX-UNIT/ M-UNIT/

W-UNIT/ K-UNIT/ F-UNIT SeriesSignal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Mini-M Series

Signal Conditioners

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

10-RACK Series

Rack-mounted

18-RACK Series

38-RACK Series

Wide Variety of I/O Modules ◆ Ultra-small size thanks to surface-mounted compo-nents with low heat generating design

◆ 4-way isolation

◆ Continuously selectable input ranges

◆ 4–20mA 2nd output available

◆ Local LED display indicates input in engineering unit

◆ The display helps programming with the front ITEM/DATA buttons.


Plug-in Front Configurable MX-UNIT Series

Field Configurable

Plug-in type ◆ LCD display optional


Plug-in M-UNIT Series

◆ Two independent output ranges can be specified.


Plug-in Signal Splitters W-UNIT Series

Plug-in signal splitters

Plug-in type ◆ Low cost

◆ Wide selection of power transducers

Plug-in K-UNIT Series

◆ Zero & span adjustments behind access door

Space-saving Plug-in F-UNIT Series

Space-saving type

Dual Output Super-mini Signal Conditioners Pico-M Series


A

249

249Other Signal ConditionersH-UNIT/ 10-RACK/ 18-RACK/ 38-RACK Series and Others Signal Conditioners


Power Transducers

Indicators

Limit Alarms

Gateway,Remote I/O


PC Recorder




Signal Conditioners

Mini-M Series

Mini-MW Series

M6 Series

M5-UNIT Series

W5-UNIT Series

M3-UNIT Series

M3S-UNIT Series

20 Series

Pico-M Series

MX-UNIT Series

M-UNIT Series

W-UNIT Series

K-UNIT Series

F-UNIT Series

H-UNIT Series

Rack-mounted

10-RACK Series

18-RACK Series

38-RACK Series

Space-saving type ◆ Pneumatic transducers available

Space-saving Plug-in H-UNIT Series

◆ Up to 16 units in 19-inch rack

◆ Optional 40-pin connector for outputs

◆ Direct interface to Various DCS via connector

Dual Output 10-RACK Series

One-input, two isolated outputs

Connectors compatible to various DCS ◆ Up to 16 units in 19-inch rack

◆ Direct interface to Various DCS via connector

◆ Dual outputs standard

DCS Front End 18-RACK Series

◆ Complete packaging for interposing relays

◆ Plug to plug connection controller

◆ I/O simulator function

Interposing Relays 38-RACK Series

Greatly simplifies designing, installation, wiring and testing of interposing relays.

◆ Accepts 100–240V AC and provides regulated 24V DC output (60W / 120W / 240W)

◆ Maintenance forecast monitor function

DC Power Supply model: MDC5 / MDC6 / MDC7

signal conditioners - m-system · m2sn input loop powered isolator p.010 m2xu universal transmitter...

Documents