sims install v4
TRANSCRIPT
-
7/28/2019 SIMS Install V4
1/21
SAEL SIMSSecurity Information Management System
Short Installation ManualVersion 4
2003 by Sauter Communication AG, VaduzVersion 4.0
- 1 -
-
7/28/2019 SIMS Install V4
2/21
Installation
Supported operating systems:
Windows 2000 Professional >=SP3
Windows XP Home or Professional
Minimum Hardware requirements:
PC with minimum Pentium 3, 256 MB Ram, 100 MB free Disk Space
Screen resolution: 1024x768 or 1280x1024
The following parts have to be installed in the correct order:
1. dotnetfx.exe Microsoft .NET Runtime V1.12. MDAC_TYP.EXE Microsoft Database Access Components
V2.73. MSDE_EN\Setup.exe Microsoft SQL Server Desktop Engine20004. Setup.exe SIMS Installer
5. Setup ODBC Connection6. Restore empty NOX Database with SQLUpdate.exe7. Configure your Setup with V4.SIMSConfig.exe8. Starting the System for the first time
1. Installing the Microsoft .NET Runtime
The file "dotnetfx.exe" is the setup program for the .NET Framework.When you double-click this file the installation will begin. You should justfollow the instructions that appear on the screen, and when you areoffered any choices you should accept the default, unless you know of areason to do otherwise
- 2 -
-
7/28/2019 SIMS Install V4
3/21
2. MDAC_TYP Database Access Components
Then you need to install the Microsoft Database Access Components:
Select the I accept Checkbox and click next
Click Next
- 3 -
-
7/28/2019 SIMS Install V4
4/21
Click Finish
To complete the installation select Close.Its possible that you have to restart your computer now.
- 4 -
-
7/28/2019 SIMS Install V4
5/21
3. SQL Server Database Engine
Now its time to install the Microsoft SQL Server Database Engine.Please note: This is only the Database Engine. There will be noManagement Tools for the Engine.
Open the Folder MSDE_EN on your CD.
And start the Installation by starting Setup.exe
When the Installation is finished, please restart your computer
When you have restarted you computer, you will notice a new Symbol inyour Taskbar:
Now start the Database Server by right-clicking on the icon with the red
point:
- 5 -
-
7/28/2019 SIMS Install V4
6/21
if the point turns green after some seconds, the Database Server is up andrunning.
- 6 -
-
7/28/2019 SIMS Install V4
7/21
4. Installation SAEL SIMS
Now its time to install the main Application.Start Setup.exe on your CD:
Press Next
- 7 -
-
7/28/2019 SIMS Install V4
8/21
now the Application is beeing installed to: c:\SIMS
Press Finish
- 8 -
-
7/28/2019 SIMS Install V4
9/21
5. Setup ODBC Connection
To have access to the SQL Database there has to be setup an ODBCConnection.Go to your Controlpanel:
Goto to Administraative Tools:
- 9 -
-
7/28/2019 SIMS Install V4
10/21
Select Data Sources (ODBC):
Select System DSN:
- 10 -
-
7/28/2019 SIMS Install V4
11/21
Select Add:
There select SQL Server:
- 11 -
-
7/28/2019 SIMS Install V4
12/21
Enter as name: SQLServerSelect in Server: the name of your PC
Then press Next
Press Next
- 12 -
-
7/28/2019 SIMS Install V4
13/21
Press Next
Press Finish
- 13 -
-
7/28/2019 SIMS Install V4
14/21
Press Test Data Source
If test completes successfully, your ODBC Setup is fine.
- 14 -
-
7/28/2019 SIMS Install V4
15/21
6. Restore empty Database
Next step is to restore an empty Database to the SQL Server.To do that, start the SQL Update Program on your Desktop
Select Restore:
Select the File nox.sqlbak
- 15 -
-
7/28/2019 SIMS Install V4
16/21
Press Ok
Press Ok
Now your Database is ready for use.
- 16 -
-
7/28/2019 SIMS Install V4
17/21
7. Configure your Settings
Start Configuration:
Start the V4E.SIMSConfig.
You will be prompted for a password.
Default Password is 1212
- 17 -
-
7/28/2019 SIMS Install V4
18/21
Then you see the main configuration screen:
Please enter at least the following information:
On the right side, you can select the main language (for Config andServer)
Client-name: Name of your ClientServer IP Address: The IP-Address is this ComputerComm. IP Address: The IP-Address is this Computer (normally the same asthe Server IP)Everything else need not to be changed.
Configuring the first central system:
Select Centrals
- 18 -
-
7/28/2019 SIMS Install V4
19/21
Enter the Name of the system.Enter the Central-key you received from Sauter Communication.
IP address: enter the address of the centralLogout-code: Enter a valid user code to connect to the central
When all information is entered, save them.
Now you are ready for a first system startup.
- 19 -
-
7/28/2019 SIMS Install V4
20/21
8. Starting the System up
The following Programs have to run:
SQL Server (normally started automatically by Windows)
SIMS Server (can be started in the Startup Group)NOXComm (with the appropriate settings can also be started in StartupGroup)SIMS (can be started when needed)
SIMS Server:
- 20 -
-
7/28/2019 SIMS Install V4
21/21
Now start the Workstation:
For a first logon:Username: demoPassword: demo
Congratulation. Installation is complete!
You can go on configuring your system to your needs.