siso hinges - sisocz.cz¡věsy do masivu.pdf · siso a/s tager forbehold for trykfejl samt...
TRANSCRIPT
- high quality furniture fittings
H I N G E SS I S O
- high quality furniture fittings
DISTRIBUTOR
- high quality furniture fittings
SISIO A/SMILEPARKEN 11DK - 2740 SKOVLUNDE(COPENHAGEN)DENMARKPHONE: (+45) 45 830 900FAX: (+45) 45 830 444
The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve the right to make design improvements.
We bear no liability for any misprints or other errors that might occur in the production of the catalogue.
SISO A/S tager forbehold for trykfejl samt ændringer i produktets specifikationer.
Für Druckfehler und Irrtümer ist jede Haftung ausgeschlossen. Produktänderungen behalten wir uns vor.
- high quality furniture fittings
3
CONTENTS
Cabinet hinges for wood
Cup hinge - 2-way 4-13Cup hinge - soft close 14-17Door dampers & cabinet hinge 135 degree 18-19PTO (push to open) & touch latches 20-23Hinges with visible axle 24-25Butt & Flap hinges 26-28Flush & pin hinges 29
Cabinet hinges for alu frames
Hinges - soft close 30-31
Cabinet hinges for glass
Cup hinges - 2-way 32-33Cup hinges - soft close 34-37Hinges for drilling 38-40Hinges for ”no drilling” 41-44Hinges for uv-glue 45-46
Table hinges
Concealed hinges 47-51Butler´s tray hinges 52
Caravan hinges 53
DOOR HINGES (HEAVY DUTY) 54-58
- high quality furniture fittings
4
MINI HINGE Ø 26 MM -98O
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Full overlay (A) Half overlay (B) Inset (C)
D= 17 mm D= 7 mm A= 1 mm
K=5K=5 K=5
A
H=0H=0 H=2
D
Door Door Door Door
D
Side to side adjustmentIn & out adjustment
Sid
e pa
nel
Sid
e pa
nel
Sid
e pa
nel
2-WAY
SLIDE-ON
F/ 12-22 MM PANEL
Ø26 MM CUP
Standard model
- high quality furniture fittings
5
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.02.640Incl. mounting
plateH = 0
SISO logo in cup
D KH
3 4 5 6
0 15 16 17 18
2 13 14 15 16
4 11 12 13 14
15.02.641Incl. mounting
plateH = 0
SISO logo in cup
D KH
3 4 5 6
0 5 6 7 8
2 3 4 5 6
4 1 2 3 4
15.02.642Incl. mounting
plateH = 2
SISO logo in cup
A KH
3 4 5 6
0 1 0 -1 -2
2 3 2 1 0
4 1 2 3 4
H = 0/2f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.726H = 2
f/euro screwsClip-on
To be ordered separately if euro screw mounting is wanted. Pre-mounted euro screws included.
Opening angle: 98o
Depth of hinge cup: 9,5 mmDiameter of hinge cup: 26 mmMounting of hinge: Screw on: c.c.38 mmPossible drilling distanceson the door (K): 3-6 mmDoor thickness: 12-22 mm
K
H
Door
D
H=12+K-D
KA
H
Door
H=-4+K+A
Sid
e pa
nel
K
H
D
Door
H=2+K-D
Sid
e pa
nel
Sid
e pa
nel
MINI HINGE Ø 26 MM -98O
Full overlay (A)
Half overlay (B)
Inset (C)
32
37
32
37
Cup drawing
Ø 26 mm38
K89,5
Cabinet edge
Cabinet edge
- high quality furniture fittings
6
MAXI HINGE Ø35 MM - 110O - 2-WAY
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Side to side adjustmentIn & out adjustment
Inset (C)
A= 1 mm
K=5A
H=4
Door
Sid
e pa
nel
Half overlay (B)
D= 10 mm
K=5
H=2
D
Door Door
Sid
e pa
nel
Full overlay (A)
D= 18 mm
K=5
H=2
Door
D
Sid
e pa
nel
2-WAY
Slide-on
F/ 14-24 MM PANEL
Ø35 MM CUP
Standard model
- high quality furniture fittings
7
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.03.670Incl. mounting
plateH = 2
SISO logo in cup
D KH
3 4 5 6 7
0 18 19 20 21 22
2 16 17 18 19 20
4 14 15 16 17 18
15.03.675Incl. mounting
plateH = 2
SISO logo in cup
D KH
3 4 5 6 7
0 10 11 12 13 14
2 8 9 10 11 12
4 6 7 8 9 10
15.03.680Incl. mounting
plateH = 4
SISO logo in cup
A KH
3 4 5 6 7
0 -1 -2 -3 -4 -,5
2 1 0 -1 -2 -3
4 3 2 1 0 -1
H = 2/4f/chipboard
screwsSlide-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.726H = 2
f/euro screwsSlide-on
To be ordered separately if euro screw mounting is wanted. Pre-mounted euro screws included.
37
Opening angle: 110o
Depth of hinge cup: 11,3 mmDiameter of hinge cup: 35 mmMounting of hinge: Screw on: c.c.48 mmPossible drilling distanceson the door (K): 3-7 mmDoor thickness: 14-24 mm
K
H
Door
D
H=15+K-D
37
KA
H
Door
H=-2+K+A
Sid
e pa
nel
K
H
D
Door
H=7+K-D
Sid
e pa
nel
Sid
e pa
nel
MAXI HINGE Ø35 MM - 110O - 2-WAY
Full overlay (A)
Half overlay (B)
Inset (C)
Cup drawing
Ø 35 mm48
K611,3
32
32
Cabinet edge
Cabinet edge
- high quality furniture fittings
8
MAXI HINGE Ø35 MM - 165O - 2-WAY
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Side to side adjustmentIn & out adjustment
Inset (C)
A= 1 mm
K=5A
H=4
Door
Sid
e pa
nel
Half overlay (B)
D= 11 mm
K=5
H=2
D
Door Door
Sid
e pa
nel
Full overlay (A)
D= 16 mm
K=5
H=2
Door
D
Sid
e pa
nel
2-WAY
Slide-on
F/ 14-24 MM PANEL
Ø 35 MM
Standard model
- high quality furniture fittings
937
Opening angle: 165o
Depth of hinge cup: 11,3 mmDiameter of hinge cup: 35 mmMounting of hinge: Screw on: c.c.48 mmPossible drilling distanceson the door (K): 3-7 mmDoor thickness: 14-24 mm
K
H
Door
D
H=15+K-D
37
KA
H
Door
H=-2+K+A
Sid
e pa
nel
K
H
D
Door
H=8+K-D
Sid
e pa
nel
Sid
e pa
nel
MAXI HINGE Ø35 MM - 165O - 2-WAY
Full overlay (A)
Half overlay (B)
Inset (C)
NO STOCK ITEM
NO STOCK ITEM
Cup drawing
Ø 35 mm48
K611,3
32
32
Cabinet edge
Cabinet edge
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.03.681Incl. mounting
plateH = 2
SISO logo in cup
D KH
3 4 5 6 7
0 16 17 18 19 20
2 14 15 16 17 18
4 12 13 14 15 16
15.03.682Incl. mounting
plateH = 2
SISO logo in cup
D KH
3 4 5 6 7
0 11 12 13 14 15
2 9 10 11 12 13
4 7 8 9 10 11
15.03.683Incl. mounting
plateH = 4
SISO logo in cup
A KH
3 4 5 6 7
0 -1 -2 -3 -4 -,5
2 1 0 -1 -2 -3
4 3 2 1 0 -1
H = 2/4f/chipboard
screwsSlide-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.726H = 2
f/euro screwsSlide-on
To be ordered separately if euro screw mounting is wanted. Pre-mounted euro screws included.
- high quality furniture fittings
10
MAXI HINGE Ø 35 MM -100O
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Side to side adjustmentIn & out adjustment
Up & down adjustment
Inset (C)
A= 0,5 mm
K=5A
H=0
Door
Sid
e pa
nel
Half overlay (B)
D= 10 mm
K=5
H=0
D
Door Door
Sid
e pa
nel
Full overlay (A)
D= 19 mm
K=5
H=0
Door
D
Sid
e pa
nel
2-WAY
CLIP-ON
F/ 14-24 MM PANEL
Ø 35 MM
Hinge w/mounting plate f/easy up & down adjustment (optional)
Standard model
- high quality furniture fittings
11
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.03.735Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5 6 7
0 17 18 19 20 21
2 15 16 17 18 19
4 13 14 15 16 17
15.03.736Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5 6 7
0 8 9 10 11 12
2 6 7 8 9 10
4 4 5 6 7 8
15.03.737Incl. SISO
name plate + mounting plate
H = 0
A KH
3 4 5 6 7
0 1,5 0,5 0,5 -1,5 -2,5
2 3,5 2,5 1,5 0,5 -0,5
4 5,5 4,5 3,5 2,5 1,5
H = 0f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.728-1H = 0
f/euro screwsClip-on
To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.
15.03.730 Cover plate for screws on hinge cup
Opening angle: 100o
Depth of hinge cup: 11,3 mmDiameter of hinge cup: 35 mmMounting of hinge: Screw on: c.c.48 mmPossible drilling distanceson the door (K): 3-7 mmDoor thickness: 14- 24 mm.
K
H
Door
D
H=14+K-D
32
37
32
37
KA
H
Door
H=-4,5+K+A
Sid
e pa
nel
K
H
D
Door
H=5+K-D
Sid
e pa
nel
Sid
e pa
nel
MAXI HINGE Ø 35 MM -100O
Full overlay (A)
Half overlay (B)
Inset (C)
Cup drawing
Ø 35 mm48
K611,3
Cabinet edge
Cabinet edge
- high quality furniture fittings
12
MAXI HINGE Ø 35 MM -165O
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Side to side adjustmentIn & out adjustment
Inset (C)
A= 0,5 mm
K=5A
H=0
Door
Sid
e pa
nel
Half overlay (B)
D= 10 mm
K=5
H=0
D
Door Door
Sid
e pa
nel
Full overlay (A)
D= 19 mm
K=5
H=0
Door
D
Sid
e pa
nel
2-WAY
CLIP-ON
F/ 14-24 MM PANEL
Ø 35 MM
Hinge w/mounting plate f/easy up & down adjustment (optional)
Standard model
- high quality furniture fittings
13
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.03.740Incl. mounting
plateH = 0
D KH
3 4 5 6 7
0 17 18 19 20 21
2 15 16 17 18 19
4 13 14 15 16 17
15.03.741Incl. mounting
plateH = 0
D KH
3 4 5 6 7
0 8 9 10 11 12
2 6 7 8 9 10
4 4 5 6 7 8
15.03.742Incl. mounting
plateH = 4
A KH
3 4 5 6 7
0 1,5 0,5 0,5 -1,5 -2,5
2 3,5 2,5 1,5 0,5 -0,5
4 5,5 4,5 3,5 2,5 1,5
H = 0f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.728-1H = 0
f/euro screwsClip-on
To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.
Opening angle: 165o
Depth of hinge cup: 11,3 mmDiameter of hinge cup: 35 mmMounting of hinge: Screw on: c.c.48 mmPossible drilling distanceson the door (K): 3-8 mmDoor thickness: 14- 26 mm.
K
H
Door
D
H=14+K-D
32
37
32
37
KA
H
Door
H=-4,5+K+A
Sid
e pa
nel
K
H
D
Door
H=5+K-D
Sid
e pa
nel
Sid
e pa
nel
MAXI HINGE Ø 35 MM -165O
Full overlay (A)
Half overlay (B)
Inset (C)
NO STOCK ITEM
NO STOCK ITEM
Cup drawing
Ø 35 mm48
K611,3
Cabinet edge
Cabinet edge
- high quality furniture fittings
14
SOFT CLOSE MINI HINGE Ø 26 MM -100O
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Full overlay (A) Half overlay (B) Inset (C)
D= 19 mm D= 10 mm A= 1 mm
K=5K=5 K=5
A
H=0H=0 H=2
D
Door Door Door Door
D
Side to side adjustment
In & out adjustment
Up & down adjustment
Sid
e pa
nel
Sid
e pa
nel
Sid
e pa
nel
SOFT CLOSE
CLIP-ON
F/ 12-22 MM PANEL
Ø 26 MM
Hinge w/mounting plate f/easy up & down adjustment (optional)
Standard model
- high quality furniture fittings
15
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.02.650Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5
0 15,5 16,5 17,5
2 13,5 14,5 15,5
4 11,5 12,5 13,5
15.02.655Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5
0 6,5 7,5 8,7
2 4,5 5,5 6,5
4 2,5 3,5 4,5
15.02.660Incl. SISO
name plate + mounting plate
H = 2
A KH
3 4 5
0 1 0 -1
2 3 2 1
H = 0/2f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.728-0H = 0
f/euro screwsClip-on
To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.
Opening angle: 100o
Depth of hinge cup: 10 mmDiameter of hinge cup: 26 mmMounting of hinge: Screw on: c.c.38 mmPossible drilling distanceson the door (K): 3-5 mmDoor thickness: 12-22 mm
K
H
Door
D
H=12,5+K-D
32
37
32
37
KA
H
Door
H=-4+K+A
Sid
e pa
nel
K
H
D
Door
H=3,5+K-D
Sid
e pa
nel
Sid
e pa
nel
SOFT CLOSE MINI HINGE Ø 26 MM -100O
Full overlay (A)
Half overlay (B
Inset (C)
Cup drawing
Ø 26 mm38
K7,510
Cabinet edge
Cabinet edge
- high quality furniture fittings
16
SOFT CLOSE MAXI HINGE Ø 35 MM -100O
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Full overlay (A) Half overlay (B) Inset (C)
D= 19 mm D= 10 mm A= 0,5 mm
K=5K=5 K=5
A
H=0H=0 H=0
D
Door Door Door Door
D
Side to side adjustmentIn & out adjustment
Up & down adjustment
Sid
e pa
nel
Sid
e pa
nel
Sid
e pa
nel
SOFT CLOSE
CLIP-ON
F/ 14-24 MM PANEL
Ø 35 MM
Hinge w/mounting plate f/easy up & down adjustment (optional)
Standard model
- high quality furniture fittings
17
Opening angle: 100o
Depth of hinge cup: 11,3 mmDiameter of hinge cup: 35 mmMounting of hinge. Screw on: c.c.48 mmPossible drilling distanceson the door (K): 3-7 mmDoor thickness: 14-24 mm
K
H
Door
D
H=14+K-D
32
37
32
37
KA
H
Door
H=-4,5+K+A
Sid
e pa
nel
K
H
D
Door
H=5+K-D
Sid
e pa
nel
Sid
e pa
nel
SOFT CLOSE MAXI HINGE Ø 35 MM -100O
Full overlay (A)
Half overlay (B)
Inset (C)
Cup drawing
Ø 35 mm48
K611,3
Cabinet edge
Cabinet edge
Steel - Nickel Plated or SS-304 Item No. D: A:Overlay calculations Gap calculations
Steel: 15.03.731SS-304: 15.03.760
Incl. SISO name plate + mounting
plateH = 0
D KH
3 4 5 6 7
0 17 18 19 20 21
2 15 16 17 18 19
4 13 14 15 16 17
Steel: 15.03.732SS-304: 15.03.765
Incl. SISO name plate + mounting
plateH = 0
D KH
3 4 5 6 7
0 8 9 10 11 12
2 6 7 8 9 10
4 4 5 6 7 8
Steel: 15.03.733SS-304: 15.03.770
Incl. SISO name plate + mounting
plateH = 0
A KH
3 4 5 6 7
0 1,5 0,5 0,5 -1,5 -2,5
2 3,5 2,5 1,5 0,5 -0,5
4 5,5 4,5 3,5 2,5 1,5
H = 0f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.728-0H = 0
f/euro screwsClip-on
To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.
15.03.730 Cover plate for screws on hinge cup
- high quality furniture fittings
18
DOOR DAMPERS
Application: Box for soft close damper
Material: Grey ABS
Overall size: 46 mm x 52 mm c.c. 32 mm
Item No.: # 15.04.516
Damper and screws to be ordered separately
DOOR DAMPER BOX “BLUES” SCREW-ON
32
46
52
Ø 4,5
Application: Soft close damper for doors and drawers
Material: Grey ABS
Overall size: Ø 10 mm x 50 mm
Item No.: # 15.04.517
LGA tested in Germany. Passed 80.000 cycles
DOOR DAMPER “BLUES” FOR DRILLING
Ø 10 mm
Min 52
To be ordered separately
- +Damping ca. 150 - 200 mm
Drilling diameter Ø10 x 52 mm
- high quality furniture fittings
19
DOOR DAMPER BOX “BLUES” & CABINET HINGE 135 DEGREE FOR CHAMFERED EDGES
Application: Box for soft close damper
Material: Grey ABS
Overall size: 20 mm x 53,5 mm c.c. 32 mm
Item No.: # 15.04.515
Damper and screws to be ordered separately
DOOR DAMPER BOX INVISIBLE “BLUES”
32
20
53,5
52,6
Ø 5To be ordered separately
Application: 135 degree hinge for 45 degree edges. 3 dimensional adjustment
Material: Cup body - zamak – nickel plated Linkage – steel - nickel plated
Door thickness: 15 – 22 MM
Size: Ø 35 x 13,5 mm cup – c.c.: 52 mm
Item No.: 15.04.020
CABINET HINGE 135 DEGREE FOR CHAMFERED EDGES
3552
Chamfer 45013,5 deep
3552
7 575
Door open Door closed
Side panelSide panel
Door
Door
Height
Height Depth
Width
Adjustable in three directions: 2,5 mm in height, 2,5 mm in depth and width.
Ø 5mm
- high quality furniture fittings
20
MAXI HINGE PTO Ø 35 MM -100O
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Full overlay (A) Half overlay (B) Inset (C)
D= 17 mm D= 8 mm A= 1 mm
K=3K=3 K=3
A
H=0H=0 H=0
D
Door Door Door Door
D
Side to side adjustmentIn & out adjustment
Up & down adjustment
Sid
e pa
nel
Sid
e pa
nel
Sid
e pa
nel
PUSH TO OPEN
CLIP-ON
F/ 14-24 MM PANEL
Ø 35 MM
Hinge w/mounting plate f/easy up & down adjustment (optional)
Standard model
- high quality furniture fittings
21
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.03.745Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5 6 7
0 17 18 19 20 21
2 15 16 17 18 19
4 13 14 15 16 17
15.03.746Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5 6 7
0 8 9 10 11 12
2 6 7 8 9 10
4 4 5 6 7 8
15.03.747Incl. SISO
name plate + mounting plate
H = 0
A KH
3 4 5 6 7
0 1 0 -1 -2 -3
2 3 2 1 0 -1
4 5 4 3 2 1
H = 0f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.728-1H = 0
f/euro screwsClip-on
To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.
Opening angle: 100o
Depth of hinge cup: 11,3 mmDiameter of hinge cup: 35 mmMounting of hinge. Screw on: c.c.48 mmPossible drilling distanceson the door (K): 3-7 mmDoor thickness: 14-24 mm
K
H
Door
D
H=14+K-D
32
37
32
37
KA
H
Door
H=-4+K+A
Sid
e pa
nel
K
H
D
Door
H=5+K-D
Sid
e pa
nel
Sid
e pa
nel
MAXI HINGE PTO Ø 35 MM -100O
Full overlay (A)
Half overlay (B)
Inset (C)
Cup drawing
Ø 35 mm48
K611,3
To be used with Touch Latches ”Slim” page 22-23C
abinet edgeC
abinet edge
- high quality furniture fittings
22
Application: Push-to-open touch latch for doors and drawers
Material: Black ABS, White ABS, Grey ABS RAL 7040
Overall size: 85 mm x 14,5 mm
Extended: 105,5 mm
Item No.: # 22.01.108 (Black) # 22.01.109 (Grey) # 22.01.109-5 (White)
Screws to be ordered separately
TOUCH LATCH ”SLIM” W/SOFT BUMPER
Application: Push-to-open touch latch for doors and drawers with magnet & striker. Suitable for wood & glass fronts
Material: Black ABS, White ABS, Grey ABS RAL 7040
Overall size: 84,5 mm x 14,5 mm
Extended: 105 mm
Item No.: # 22.01.104 (White) # 22.01.105 (Black) # 22.01.106 (Grey)
Incl. Steel striker 20 x 20 mm with adhe-sive tape for glass fixing & screw hole for wood fixing
Screws to be ordered separately
MAGNET TOUCH LATCH ”SLIM” W/STRIKER
adhesive tape on striker & wood screw
TOUCH LATCHES ”PUSH-TO-OPEN”
14,5
83
20,5 20,5
11 4xØ3,4
9,5
26
20
20
10 5
1,2
84,5
or46
27
83
14,5
20,5 20,5
4xØ3,4 11
9,5
or47
85
adhesive tape on striker & wood screw
Black
Black
White
White
Grey
Grey
- high quality furniture fittings
23
20 mm
40 mm
20 mm. extension
40 mm. extension
Mounting of latch
In closed position, press the tab upwards or downwards to choose the length of extension
CHANGE OF EXTENSION LENGTH
Clip the body to the front of the base plate.
1
Press the body onto the back of the base plate until fixed.
2 3
TOUCH LATCHES ”PUSH-TO-OPEN”
- high quality furniture fittings
24
WIDE OPENING HINGE -270O
CLIP-ONF/ 16-19 MM PANELFULL-OVERLAY
Application: Wide opening hinge 2700 opening for overlay doors. With catch function & visible axle.
Material: Zamak – Nickel plated
Cup wing: ø 35 x 12 mm. C.c: 45mm hole distance. Wood screw fixation. Ø 4 mm.
Mounting plate: Clip-on. C.c: 32 mm hole distance.With vertical & lateral adjustment function. Wood screw fixation. Ø 4 mm.
Door thickness: 16 – 19 mm
F/16mm panels # 15.04.079 F/19mm panels # 15.04.080
Other finishes on request.
Sid
e pa
nel
Doo
r
Door 16/19
270o
16/19
Door 16/19
Sid
e pa
nel
Door 16/19
Sid
e pa
nel
Door180o
16/1916/19
Door 16/19
Sid
e pa
nel
16
12
Spring loaded catch
Clip-on release handle
Set screw for vertical adjustment
Set screw for lateral adjustment
37
14
32
Ø 35
129,5
45
3714
32 45
12,5
9,5
Ø 35
Ø4 mm
Ø4 mm
- high quality furniture fittings
25
16
1,5
16,6
31,3
4
70
38
16,5
707
31,711
Application: Antique style hinge with visible axle & catch function.
Material: Steel – Bronze plated
Overlay: 6 mm
Overall size: 70 mm x 70 mm
Item No.: # 15.90.011
Screws to be ordered separately
”FORTE” SELF-CLOSING HINGE
Door
Frame
6 mmoverlay
Application: Antique style hinge with visible axle & catch function.
Material: Steel
Overlay: Variable
Overall size: 51 mm x 69 mm
Item No.: Brass Pl. # 15.90.009Bronzed Pl. # 15.90.010
Screws to be ordered separately
”VARIA” SELF-CLOSING HINGE
Frame
Door
34
41
5469
51
- high quality furniture fittings
26
TRUE R2
34
10
27
13,5
50
30
10,5
FLAP HINGESFLAP HINGE, Detachable
Material: Zamak Finish: Bronzed # 15.09.077 Nickel Plated # 15.09.078
Size: Ø 30 x 10 mmOpening: 90 degree
Material: Flap : Zamak House: Plastic Size: Ø 30 x 12 mm (House) Ø 30 x 4 mm (Flap)
Opening: 90 Degree
Finish: White/Nickel # 15.09.105 Brown/Nickel # 15.09.120
FLAP HINGE, For thin flaps
Ø30 30
3
12
4
22,3
20,8
15,
50
PT
G S
S: Adjustable 0 - 2,50 mm
PT = Plate thickness G = Gap16 mm 0,50 mm17 mm 1,50 mm18 mm 2,50 mm19 mm 3,50 mm20 mm 4,50 mm21 mm 5,50 mm22 mm 6,50 mm
- high quality furniture fittings
27
FLAP HINGES
Material: Steel Size: Ø 30 x 1,5 mmHoles: Ø 4 mm
Finish: Brass Plated (BPL) # 15.09.410 Bronzed # 15.09.411
STEEL FLAP HINGES
4
6 Ø 3019
948
7
6,5 -0
,3
1,5
Material: Brass or Stainless Steel (SS) AISI 316
Screw holes: Ø 4,5 mm
Size Material Finish Item No.
30 x 80 x 1,75 mm Brass Polished 15.11.22030 x 80 x 1,75 mm Brass Sanded 15.11.23030 x 80 x 2,00 mm SS Polished 15.11.190
BRASS & SS-316 FLAP HINGES
Ø 4,5 mm
80 mm
Flap hinge, Stainless Steel
Flap hinge, Polished Brass & Sanded
30 mm
80 mm
13 mm
80 mm
13 mm
Flap hinge, Brass
Material: Brass
Screw holes: Ø 3 mm
Size Material Finish Item No.13 x 80 x 1,75 mm Brass Sanded 15.11.215
BRASS FLAP HINGE “SLIM”
- high quality furniture fittings
28
Material: Brass or Stainless Steel (SS) AISI 316
Screw holes: Ø 3,5 mm
Size: W/H/T Material Finish Item No.40 x 35 x 1,4 mm Brass Sanded 15.13.06050 x 40 x 1,4 mm Brass Sanded 15.13.09050 x 40 x 1,7 mm SS Polished 15.13.10060 x 50 x 1,8 mm Brass Polished 15.13.125
BRASS & SS-316 BUTT HINGES
T
H
W
BUTT HINGES
STEEL BUTT HINGES
Size: W/H/T Screw Holes Finish Item No.25 x 24 x 1,2 mm 4 x Ø 4 mm BZP # 15.13.05025 x 24 x 1,2 mm 4 x Ø 4 mm BPL # 15.13.05140 x 33 x 1,4 mm 4 x Ø 4 mm BZP # 15.13.05550 x 37 x 1,5 mm 4 x Ø 4,5 mm BPL # 15.13.08350 x 37 x 1,5 mm 6 x Ø 5,5 mm BZP # 15.13.085
65 x 41 x 1,5 mm 6 x Ø 4,5 mm BZP # 15.13.130
65 x 41 x 1,5 mm 6 x Ø 4,5 mm BPL # 15.13.131
75 x 48 x 1,5 mm 6 x Ø 5 mm BZP # 15.13.211
75 x 48 x 1,5 mm 6 x Ø 5 mm BPL # 15.13.212
90 X 54 X 1,75 mm 6 x Ø 6 mm BZP # 15.13.216
90 X 54 X 1,75 mm 6 x Ø 6 mm BPL # 15.13.217
Material: SteelFinish: Bright ZInc Plated (BZP) Brass Plated (BPL)
H
7
W
T
- high quality furniture fittings
29
PIN HINGE F/WOODENCABINETS
26
24,5
10,5
M6
Ø 9
33
5
7,5
51,2
66,6
17
76
47,2
6,7
5,8
23,6
41,4
7,538,4
69,3
R3,91,6
Material: Steel, Brass Plated (BPL)Size: 76 x 33 x 1,6 mmScrew hole: Ø 5 mm
Model Item No.ROUND # 15.20.201
Material: Steel, Brass Plated (BPL)Size: 76 x 28 x 1,4 mmScrew hole: Ø 5 mm
Model Item No.STRAIGHT # 15.20.200
FLUSH & PIN HINGES
Material: Steel
Size: Ø 9 x 26 mm
Finish: Brass Plated
Item No.: # 15.08.040
51
44
76
2228
5
7
14,6
4,3
38,5
6,7
9
6,6
22
1,4
R2,2
15.20.201
15.20.200
FLUSH HINGE “ROUND”
FLUSH HINGE “STRAIGHT”
- high quality furniture fittings
30
V=20
SOFT CLOSE ALUMINIUM FRAME HINGE -100O
H = height of mounting plateD = required door overlayV = width of aluminium frameA = gap between door and sidepanel
Full overlay (A) Half overlay (B) Inset (C)
D= 18 mm D= 9 mm A= 0,5 mm
V=20 A
H=0H=0 H=0
DD
Side to side adjustmentIn & out adjustment
Sid
e pa
nel
Sid
e pa
nel
Sid
e pa
nel
V=20
SOFT CLOSE
CLIP-ON
F/ 19-24 MM PANEL
Standard model
- high quality furniture fittings
31
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.03.800Incl. SISO
name plate + mounting plate
H = 0
D VH
19 20 21 22 23
0 17 18 19 20 21
2 15 16 17 18 19
4 13 14 15 16 17
15.03.801Incl. SISO
name plate + mounting plate
H = 0
D VH
19 20 21 22 23
0 8 9 10 11 12
2 6 7 8 9 10
4 4 5 6 7 8
15.03.802Incl. SISO
name plate + mounting plate
H = 0
A VH
19 20 21 22 23 24
0 1,5 0,5 -0,5 -1,5 -2,5 -3,5
2 3,5 2,5 1,5 0,5 -0,5 -1,5
4 5,5 4,5 3,5 2,5 1,5 0,5
H = 0f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.728-0H = 0
f/euro screwsClip-on
To be ordered separately if easy up & down adjustment is wanted.Pre-mounted euro screws included.
Opening angle: 100o
Mounting of hinge: Screw - on c.c. 28 mmWidth of aluminium frame (V): 19-24 mm
V
H
D
32
37
32
37
Soft close hinge f/alu frames w/ mounting plate f/ easy up and down adjusting (optional)
VA
H
Sid
e pa
nel
V
H
DSid
e pa
nel
Sid
e pa
nel
SOFT CLOSE ALUMINIUM FRAME HINGE -100O
+2 -4
- 0,6+3,4
+2 -4
+2 -4
- 0,6+3,4
- 0,6+3,4
2,5 max28
18,8
+0,1- 042
+0,1- 010
16,27
4
19V
20
V: 19 mm - 24 mm
28
Full overlay (A)
Half overlay (B)
Inset (C)
1,3C
abinet edgeC
abinet edge
- high quality furniture fittings
3232
GLASS DOOR HINGES ”MINI”WITH FRONT COVER
COVER CAPS FOR HINGE ”MINI”
Application case of glass hinge Ø26 mmH - height of mounting plateD - panel thicknessK - drilling distance from the edge of glass door to the edge of the holeA - gap between door and side board
H
Glassdoor
Full overlay
K
D H=12+K-D
Sideboard
Inset
D Glassdoor
KA
H=-6+K+A
H
Sideboard
DH
0 15 16 17 18 19
K 3 4 5 6 7 AH
0 3 2 1 0 -1
K 3 4 5 6 7
Opening angle: 92O
Glass door drilling:26 mm for glass thickness 4 to 6 mmSupplied complete with wing mount-ingplate.Steel nickel pl. 3 mm distancefor chipboard screw attachmenthousing: plastic blackHingearm keyhole type,steel nickel pl.
TYPE A = FULL OVERLAY DOORS0 mm cranking # 15.01.700
TYPE C = INSET DOORS17 mm cranking # 15.01.710
318
31
41 8
FRONT COVER PLASTIC
Round cover, chrome # 15.02.720Round cover, gold # 15.02.721Round cover, black # 15.02.722Round cover, alu # 15.02.723Round cover, matt NPL # 15.02.724
Oval cover, chrome # 15.02.730Oval cover, gold # 15.02.731Oval cover, black # 15.02.732Oval cover, alu # 15.02.733Oval cover, matt NPL # 15.02.734
AUTOMATIC GLASS DOOR HINGE WITH DOUBLE SPRING ACTION
- high quality furniture fittings
33
GLASS DOOR HINGES ”SMART-92”WITH FRONT COVER
32
4-6
4-626 +0,1
26 +0,1
2,5
b
6
126+b
32
32
4-6
19
ApplicationFor inset doors. Ideal for furniture where only a very narrow wooden side-wall/pole is available.Direct fixing to side-wall/pole without any mounting plate
MountingGlass door drilling: Ø26 mmGlass thickness: 4-6 mm C.C. 32 mm
MaterialHinge arm: Zamak, nickel platedHinge cup: Black plastic
Item No. # 15.01.000
Plastic cover cap Ø32 mm
FinishAlu finish # 15.01.050
GLASS DOOR HINGE „SMART-92O“
- high quality furniture fittings
34
SOFT CLOSE MINI GLASS DOORHINGE Ø 26 MM - 950
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Side to side adjustmentIn & out adjustment
Up & down adjustment
Inset (C)
A= 1 mm
K=5A
H=2
Door
Sid
e pa
nel
Half overlay (B)
D= 8,5 mm
K=5
H=0
D
Door Door
Sid
e pa
nel
Full overlay (A)
D= 17,5 mm
K=5
H=0
Door
D
Sid
e pa
nel
SOFT CLOSE
CLIP-ON
F/ 4-6 MM GLASS
Ø 26 MMHinge w/mounting plate f/easy up & down adjustment (optional)
Standard model
- high quality furniture fittings
35
SOFT CLOSE MINI GLASS DOORHINGE Ø 26 MM - 950
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.01.720Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5
0 15,5 16,5 17,5
2 13,5 14,5 15,5
4 11,5 12,5 13,5
15.01.721Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5
0 6,5 7,5 8,5
2 4,5 5,5 6,5
4 2,5 3,5 4,5
15.01.722Incl. SISO
name plate + mounting plate
H = 0
A KH
3 4 5
0 1 0 -1
2 3 2 1
H = 0f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.728-0H = 0
f/euro screwsClip-on
To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.
Opening angle: 95o
Depth of hinge cup: 10,6 mmDiameter of hinge cup: 26 mmPossible drilling distanceson the glass door (K): 4-7 mmGlass door thickness: 4-6 mm
K
H
Door
D
H=12,5+K-D
32
37
32
37
KA
H
Door
H=-4+K+A
Sid
e pa
nel
K
H
D
Door
H=3,5+K-D
Sid
e pa
nel
Sid
e pa
nel
15.01.830 , ABSChrome plated cover
15.01.831 , ABS Alu plated cover
15.01.821 , ABSAlu plated cover
15.01.820 , ABS Chrome plated cover
Full overlay (A)
Half overlay (B)
Inset (C)
Cup drawing
Ø 26 mm
Cabinet edge
Cabinet edge
- high quality furniture fittings
36
SOFT CLOSE MAXI GLASS DOOR HINGE Ø 35 MM -100O
H = height of mounting plateD = required door overlayK = drilling distance from the edge of door to the edge of the cup holeA = gap between door and sidepanel
Side to side adjustmentIn & out adjustment
Up & down adjustment
Inset (C)
A= 0,5 mm
K=5A
H=0
Door
Sid
e pa
nel
Half overlay (B)
D= 10 mm
K=5
H=0
D
Door Door
Sid
e pa
nel
Full overlay (A)
D= 19 mm
K=5
H=0
Door
D
Sid
e pa
nel
SOFT CLOSE
CLIP-ON
F/ 4-6 MM GLASS
Ø 35 MMHinge w/mounting plate f/easy up & down adjustment (optional)
Standard model
- high quality furniture fittings
37
Steel - Nickel Plated Item No. D: A:Overlay calculations Gap calculations
15.01.715Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5 6 7
0 17 18 19 20 21
2 15 16 17 18 19
4 13 14 15 16 17
15.01.716Incl. SISO
name plate + mounting plate
H = 0
D KH
3 4 5 6 7
0 8 9 10 11 12
2 6 7 8 9 10
4 4 5 6 7 8
15.01.717Incl. SISO
name plate + mounting plate
H = 0
A KH
3 4 5 6 7
0 1,5 0,5 0,5 -1,5 -2,5
2 3,5 2,5 1,5 0,5 -0,5
4 5,5 4,5 3,5 2,5 1,5
H = 0f/chipboard
screwsClip-on
Delivered as standard mounting plate with all hinges. Chipboard screws to be ordered separately.
15.03.728-0H = 0
f/euro screwsClip-on
To be ordered separately if easy up & down adjustment is wanted. Pre-mounted euro screws included.
Opening angle: 100o
Depth of hinge cup: 11,3 mmDiameter of hinge cup: 35 mmPossible drilling distanceson the glass door (K): 4-8 mmGlass door thickness: 4-6 mm
K
H
Door
D
H=14+K-D
32
37
32
37
KA
H
Door
H=-4,5+K+A
Sid
e pa
nel
K
H
D
Door
H=5+K-D
Sid
e pa
nel
Sid
e pa
nel
SOFT CLOSE MAXI GLASS DOOR HINGE Ø 35 MM -100O
15.01.810 , ABSChrome plated cover
15.01.811 , ABS Alu plated cover
15.01.801 , ABSAlu plated cover
15.01.800 , ABS Chrome plated cover
Full overlay (A)
Half overlay (B)
Inset (C)
Cup drawing
Ø 35 mm
Cabinet edge
Cabinet edge
- high quality furniture fittings
38
GLASS DOOR HINGES F/DRILLING
MaterialNatural brass
FinishBrushed natural brass # 15.06.460Brushed nickel # 15.06.461
MountingInset doors 6 mm thicknessOpening 270O
Drill size 12 mm
Packing40 pcs
FinishChrome plated w/catch # 15.06.450Chrome plated no catch # 15.06.455
MaterialBrass
MountingInset doors 4-6 mm thickness
Opening angle: 105 O
universal top or bottomheight can be adjustedDrill size 19 mm diam.
GLASS DOOR HINGE „ELEGANT“
GLASS DOOR HINGE „NICE“
- high quality furniture fittings
39
GLASS DOOR HINGES F/DRILLING
FinishGold plated # 15.30.000Chrome plated # 15.30.001
MaterialBrass
Consists of1 hinge 60 x 30 mm2 cork cushions1 brass screw M6 x 10 mm, 4 mm hex
FunctionInset doors, max 6-8 mm glass thicknessMax door size 1400 x 700 mmØ12 mm drilling holeOpening angle 900
Packing 200 pcs per export carton
30
18 40 6-8 mm glass
30 60
12 drilling hole
29,5
2,8
4 mm HEX
BRASS GLASS DOOR HINGE „SWAN“ F/6-8 MM GLASS
3,2 x 7
5-851
10
21
28
23,523,5
Ø10
31
3,2 x 7
41
Ø8
28
10
5251
24 66
3-4,2 x 7
53,5
18
18
48
Half-overlay
5-851
10
21
28
21,526,5
Ø10
31
3,2 x 7
41
Ø8
28 5254
18 6
6
3-4,2 x 7
49
18
18
48
InsetMounting: Glass: Ø 10 mm boring holes Wood: 7 x 4 mm screw holes
Material: Stainless steel 304 - polished
Hinge size: 52 x 31 13 mm (H/W/D)Glass thickness: 5-8 mmMax door size: 650 x 900 mmMax door weight: 6 kg per hinge
Function: Inset or half-overlay Opening 1800
Inset: # 15.06.470Half-overlay: # 15.06.471
Each hinge is supplied with 2 whiltecushions 1 mm thickness
SS-304 GLASS DOOR HINGE „GRACE“ F/5-8 MM GLASS
Inset
Half-overlay
- high quality furniture fittings
40
GLASS DOOR HINGES F/DRILLING
Material 3 mm brass
Hinge size: 30 x 80 mm (H/W)
Function Inset or overlay doors
Glass thickness: 6 mmOpening angle: 270ºDrilling: Ø9 m
FinishChrome plated # 15.06.500
M6
glass 6 mm
M6
PVC cushions
3
80
60
10,7
25
30
10,7
Material Brass, Chrome plated
SizeHinge: 25 x 30 mm (H/W)Mounting plate: 25 x 12 mm (H/W)
Function Inset doors
Glass thickness: 6 - 8 mmDrilling: Ø9 mm
FinishChrome plated # 15.06.520
25
30
glass 6-8
glass 6-8
33,5
21,5
3
330
17
Ø11
24
MODEL “BOSCH” F/WALL TO GLASS
MODEL „BOSCH“F/GLASS TO GLASS
- high quality furniture fittings
41
GLASS PIVOT HINGES - NO DRILLING
Material: SteelChrome plated # 15.06.036Brass plated # 15.06.035Black anodized # 15.06.037Alu finish # 15.06.038
Mounting: Top + BottomInset Doors, max 4-6 mmComplete with nylon bushings and steel screws w/softtip
Front plate:Size: 50 x 23 mm - polished
Optional, to be ordered separatlyBALL CATCH # 15.06.076Material: BrassSize: Ø 8 mm x 13 mm
Material: SteelChrome plated # 15.06.096Black anodized # 15.06.095Alu finish # 15.06.098
Mounting: Top + BottomInset Doors, max 5 mmComplete with nylon bushings, steel screws & sleeve
Front plate:Size: 40 x 15 mm - polished
Optional, to be ordered separatelyBALL CATCH # 15.06.076Material: BrassSize: Ø 8 mm x 13 mm
6,2
3 3
6
1
10
11
27
8
23 42
29
10
8 10
Mounting: Inset doors. Complete with brass bushings & softtip screws
Material: 3 mm brass
Hinge size: 42 x 27 x 16 mm (W/H/D) Bushing size: Ø 8 x 11 mm
Glass thickness: 4 - 8 mm
Chrome plated # 15.06.070Alu finish # 15.06.071
(Optional)
GLASS DOOR HINGE 11.300
GLASS DOOR HINGE 11.561
GLASS PIVOT HINGE “BRASS”
- high quality furniture fittings
42
GLASS PIVOT HINGES ”STAINLESS STEEL” - NO DRILLING
Mounting: Inset doors. Complete with brass bushings & soft tip screws
Material:2 mm stainless steel, polished
Hinge size: 42 x 20 x 13 mm (W/H/D)Bushing size: ø9 x 8 mmGlass thickness: 6 mmItem No. # 15.06.060
Packing:70 pairs per carton
Mounting: Inset doors. Complete with brass bushings & soft tip screws
Material:2 mm stainless steel, polished
Hinge size: 52 x 26 x 16 mm (W/H/D)Bushing size: ø10 x 9 mmGlass thickness: 8 mmItem No. # 15.06.062
Packing:70 pairs per carton
Mounting: Inset doors. Complete with brass bushings & soft tip screws
Material:2 mm stainless steel, polished
Hinge size: 71 x 35 x 17 mm (W/H/D)Bushing size: ø10 x 9 mmGlass thickness: 10 mmItem No. # 15.06.064
Packing:70 pairs per carton
6,2
2 2
6
3
11
11
20
7
24 42
30
8
9 9
7,2
2 2
7
3
11
26
8
34 52
40
9
10 12
7,2
2 2
7
3
11
35
8
48 71
59,5
9
10 13
MODEL “SMALL”
MODEL “MEDIUM”
MODEL “LARGE”
- high quality furniture fittings
43
GLASS PIVOT HINGES - NO DRILLING
Material: ZamakChrome plated # 15.06.025
Mounting: Side fixationInset doors, max 4-6 mmMax door size: 800 x 350 mm- 4 kilosWith catch
Front plate:Size: 27 x 23 mm, sparkled
Matching handle: # 11.200
Packing:Each pair (Right + Left)incl. pads/cushions is packedin a polybag40 pairs per box200 pairs per export carton
Material: ZamakChrome plated # 15.06.126Brass plated # 15.06.120Black anodized # 15.06.127
Mounting:Inset doors, max 5-6 mmSide fixationWith catch
Front plate:Size: 25 x 25 mm - framed& sparkled
Matching handle:# A-10
Packing:Each pair (Right + Left)incl. pads/cushions is packedin a polybag200 pairs per box
(Optional)
GLASS DOOR HINGE A-11
GLASS DOOR HINGE 11-100
- high quality furniture fittings
44
GLASS PIVOT HINGES - NO DRILLING
Material: ZamakChrome plated # 15.06.102Bronze plated # 15.06.103Black anodized # 15.06.105
Mounting:Inset doors, max 5 mmMax door size 1000 x 600 mmWith catch
Front plate:Size 40 x 30 mm sparkled
Maching handle:# D-12, D-12/2, D-120
Packing:Each pair (right + left) incl. pads/cushionsis packed in a polybag50 pairs per box200 pairs per export carton
Material Zamak L/RChrome plated # 15.06.311/321Brass plated # 15.06.310/320Bronze plated # 15.06.312/322Black anodized # 15.06.313/323
MountingInset doors, max 5 mmCentre- or Top fixation forrounded doorsWith catch
Front plateSize: 40 x 30 mm - framed& sparkled
Matching handle# D-12, D-12/2 & D-120
Packing100 pairs per box400 pairs per export carton
GLASS DOOR HINGE D-13/2
GLASS DOOR HINGE C-13
- high quality furniture fittings
4560
60
26
2,9
6
Mounting: By UV-glue B 682-0 from Bohle UV-lamp is needed
Material: 2,9 mm Brass - Chrome Plated
Hinge size: 60 x 60 mm (H/W)
Function: Inset doors Max door width 500 mmLoad Capacity: 7,5 Kg per pairOpening: 2700
Glass thickness: 4-8 mm Finish: Chrome Plated (CPL) # 15.13.110 SS-Look (nickel brushed) # 15.13.111
BRASS BUTT HINGE FOR UV-GLUE
GLASS DOOR HINGES FOR UV-GLUE
65 2,5
50
Mounting: By UV-glue B 682-0 from Bohle. UV-lamp is needed
Material: 2,5 mm stainless steel 304 - polished
Hinge size: 65 X 50 mm (H/W)
Function: Inset doors Max door width 500 mm Load capacity: 7,5 KG per pair Opening angle 270O Glass thickness: 4-8 mm Right hand: # 15.13.590Left hand: # 15.13.600
Mounting: By UV-glue B 682-0 from Bohle. UV-lamp is needed
Material: 2 mm stainless steel 304 - polished
Hinge size: 65 x 50 mm (H/W)
Function: Inset doors Max door width 500 mm Load capacity: 7,5 KG per pair Opening angle 270O Glass thickness: 4-8 mm Item No: # 15.13.105
65
50
2
LIFT-OFF BUTT HINGE SS 304FOR UV-GLUE
BUTT HINGE SS 304FOR UV-GLUE
- high quality furniture fittings
46
GLASS DOOR HINGE FOR UV-GLUE
Mounting: By UV-glue B 682-0 from Bohle. UV-lamp is needed
Material: Brushed SS-304
Function: Pivot hinge for UV-glue, max. 10 mm glass thickness, 180 degree. max load cap. 5 Kg. pr hinge.A threaded pin in the hinge allows the door to be removed after gluing Item No: Pivot hinge Ø24 mm. # 15.06.010Pivot hinge Ø44 mm. # 15.06.011
PIVOT HINGE SS 304FOR UV-GLUE
Mounting: By UV-glue B 682-0 from Bohle. UV-lamp is needed
Material: Brushed SS-304
Function: Magnetic catch for UV-glue, magnetic locking force 2 Kg. Item No: Magnetic catch 30x12x12 mm. # 22.01.140Magnetic catch 11x12x12 mm. # 22.01.145
19
30
11,5
6
Ø7
6,511
,5
2-2x45°
0,5x45°
2-2x45°
11
6,511
,5
MAGNETIC CATCH FOR UV-GLUE, SS 304
66or 43
Ø44 or Ø24
Mounting: By UV-glue B 682-0 from Bohle. UV-lamp is needed
Material: Brushed SS-304
Function: Pivot hinge for UV-glue, max. 12 mm glass thickness, max load cap- 10 Kg.A threaded pin in the hinge allows the door to be removed after gluing Item No: Pivot hinge Ø20 mm. # 15.06.015Pivot hinge Ø30 mm. # 15.06.016
PIVOT HINGE SS 304FOR UV-GLUE
Ø30 or Ø20
24,5 or 18,5
- high quality furniture fittings
47
Material Body: Zamak Linkage: SteelFinish: Yellow Zinc Plated (YZP)Size: 44 x 12,5 mmScrew Hole: ø 4 mm - c/c 32 mmItem No.: # 15.07.115
Other sizes and finishes on request
VICI HINGE - ZAMAK w/ STEEL LINKAGE - 180O
TABLE HINGES
44
921
32
12,5
6,25
6,75
17,75
4 6,50
5
12,50
Material Body: Zamak Linkage: Stainless Steel (SS)Finish: Body: Stainless Steel look- Brushed Linkage: Plain
VICI HINGE - ZAMAK w/ SS LINKAGE - 180O
A B C D E F G H I J K Item No.45 mm 13 mm 21 mm 32 mm 8 mm 7 mm 18,5 mm 12 mm 5 mm 6,5 mm 4 mm 15.07.12060 mm 13 mm 21 mm 47 mm 9 mm 7 mm 32 mm 12 mm 6 mm 7,5 mm 5 mm 15.07.12170 mm 16 mm 26 mm 55 mm 11 mm 8 mm 34 mm 16 mm 7 mm 8 mm 5 mm 15.07.12295 mm 19 mm 32 mm 75 mm 13,5 mm 10 mm 51,5 mm 17 mm 10 mm 10 mm 6 mm 15.07.123118 mm 27 mm 50 mm 88 mm 23 mm 11 mm 63 mm 28 mm 12 mm 13 mm 7 mm 15.07.124139 mm 35 mm 45,5/
80 mm104/
113,5mm27 mm 18,5/
12,7572 mm 37 mm 12 mm 11 mm 6 mm 15.07.125
Incl. 4 CSK chip board screws
C E
D
A
B
F
K J
G
H
I
*For heavy duty doors
**
- high quality furniture fittings
48
46 mm
Ø 4mm
X
21,5 mm
85 mm
ELU TABLE HINGE 180o
Material: Steel, Yellow Zinc Plated (YZP)Over all Size: 85 mm x 46 mm
Spacer For Panel Thickness Reduction = SFPTR*
Panel Size X Item No. Panel Size X Item No.16 mm # 15.80.110 23 mm # 15.80.14518 mm # 15.80.120 25 mm # 15.80.15519 mm # 15.80.125 30 mm # 15.80.17020 mm # 15.80.130 32 mm # 15.80.025 (BPL)22 mm # 15 80.140
SFPTR* Item No. SFPTR* Item No.1 mm # 15.80.000 2 mm # 15.80.001
ø 4mm
TABLE HINGES
The Spacer gives you the possibility to operate with only one hinge size even though you use different panel thicknesses in your pro-duction.
Example: Take a Hinge for 18 mm panel thickneses and add a 2 mm spacer. Now you can use the hinge for 16 mm panel thick-ness.
X-tra Spacer
SEPA HINGE 180o
Material: Zamak
Panel thickness: Min. 26 mm
Size: 52 x 18 x 2 mm
Item No. # 15.04.076
45
18 18
34 52
45
18 18
34 52
Overlay door
Inset door
Table leaves
1,5
- high quality furniture fittings
49
TABLE FLAP HINGE - f/ 22 mm PANEL - 180o
Material:Body: NylonLinkage: Zamak
Bore Size: ø 35 mm and ø 25 mmHole Depth: 19 mm
FinishBody: Linkage: Item No. Beige Yellow Zinc # 15.80.200Black Black Zinc # 15.80.201
35
24,5
TABLE HINGES
TABLE FLAP HINGE “ZAMAK”
Material: Body: Zamak, Yellow Zinc Plated Linkage: Steel, Yellow Zinc Plated
Over all size: 108 x 40 x 3 mm
Panel size: 20 mm # 15.80.175Panel size: 27 mm # 15.80.180
ø 35 mm
3,5
48
57
16
- high quality furniture fittings
50
PIANO HINGE
OVAL PLASTIC CYLINDER HINGE - w/ BRASS LINKAGE - 180O
Material Body : Nylon Linkage: BrassSize: 34 x 14 mmScrew hole: ø 3,5 mm - c/c 25 mmFinish:
VICI HINGE - STEEL 180O
Size Finish Item No.32 x 0,7 x 1830 mm Brass Plated Lacquered # 15.12.07632 x 0,7 x 1830 mm Nickel Plated # 15.12.075
Material: SteelScrew hole: ø 4 mm - c/c 60 mm
Body Linkage Item No.Brown Bronze Plated # 15.07.165Black Burnished # 15.07.166White Nickel Plated # 15.07.167
Material SteelSize: 65 x 13 mmScrew hole: ø 4 mm - c/c 52 mm
Finish Item No.Brass Plated # 15.07.010Bronze Plated # 15.07.015
TABLE HINGES
16
19
2
65
6,50
9,75
52
13
22,75
Ø 4,50
Other Sizes on request
0,73,50
60
15
Ø 4
Ø 3,5 32
19
34
3,75
13,75
6,75
26
Ø 3,5
- high quality furniture fittings
51
SEWING MACHINE TABLE HINGE
Material: Brass or Stainless Steel (SS)Screw Holes: Ø 4.0 mm
Sizes Finish Item. No30 x 72 x 2.0 mm Brass Sanded # 15.11.35030 x 72 x 2.0 mm Nickel Satin # 15.11.35530 x 72 x 2.0 mm Bronzed # 15.11.37030 x 72 x 2.0 mm SS Polished # 15.11.39030 x 72 x 2.0 mm SS Brushed # 15.11.39130 x 80 x 2.0 mm Brass Sanded # 15.11.310
BRASS CYLINDER HINGEw/ SS PIN & SCREWS
Material: Body and Linkage: Brass Pin and Screws: Stainless Steel (SS)Finish: Brass Natural
* See illustration A and B for measurement
Sizes Item No A* B*Ø 10 mm # 15.07.345 11,0 mm 2,0 mmØ 12 mm # 15.07.346 13,5 mm 2,2 mm
Ø 14 mm # 15.07.347 15,5 mm 3,0 mm
Ø 16 mm # 15.07.348 16,5 mm 3,0 mm
Ø 18 mm # 15.07.349 17,5 mm 3,0 mm
Ø 24 mm # 15.07.350 25,0 mm 4,5 mm
PLASTIC CYLINDER HINGEw/ STEEL LINKAGE
Material: Body: Nylon Linkage: Steel, Yellow Zinc Plated
* See illustration A and B for measurement
Sizes Finish Item No A* B*Ø 12 mm Beige # 15.07.202 18,0 mm 2,5 mmØ 12 mm Dark Brown # 15.07.203 18,0 mm 2,5 mmØ 14 mm Beige # 15.07.222 15,5 mm 2,5 mmØ 14 mm Dark Brown # 15.07.223 15,5 mm 2,5 mm
A
B
Ø
TABLE HINGES
Ø 4 mm
180o
72 or 82 mm
30 mm
- high quality furniture fittings
52
BUTLER´S TRAY HINGE SQUAREW/STEEL SPRING
Ø3,25mm
64 mm
38 mm
Butler´s Tray hinge, Square, Polished Brass
Material: Brass
Screw holes: Ø3,25
Type: Size Finish Item No.Square 38 x 64 x 3 mm Sanded 15.11.160Square 38 x 64 x 3 mm Polished 15.11.161
BUTLER´S TRAY HINGE ROUNDW/STEEL SPRING
Material: Brass
Screw holes: Ø5 mm
Type: Size Finish Item No.Oval 38 x 64 x 3 mm Sanded 15.11.165Oval 38 x 64 x 3 mm Polished 15.11.166
Ø5 mm
38 mm
64 mm
BUTLER´S TRAY HINGES
Butler´s Tray hinge, Round, Polished Brass
- high quality furniture fittings
53
CARAVAN HINGESMIGNON HINGE 90o
Spring loaded Material: Steel 1,5 mm or SS 304Finish: Nickel Plated (NPL) Bright Zinc Plated (BZP)
Panel thickness: Max. 20 mm
Item No. Steel NPL # 15.05.061
Steel BZP (extra strong spring) # 15.05.051
SS 304 # 15.05.065
Full overlay - Half overlay - Inset doors
A
B
B
A
SPRING LOADED CARAVAN HINGE
Material: Steel 1,5 mmFinish: Nickel Plated (NPL)
Panel thickness: Max. 19 mm
Item No. # 15.05.120
Closed position
Open position
- high quality furniture fittings
54
DOOR HINGES SS-304 (HEAVY DUTY)
19,05
2,8
R10
25,5
24,6
25,5
13
101,
6±0
,3
4,7
76,2 ±0,3
1
3
10,300
78,100
6,90 ±0,0224
12,5
10
100
±0,3
83 60,9
57 50,1
54±0
,3
38
813
6 0+0,1
10 0+0,3
18,8
20,75012,1
28 ±0,342 ±0,3
2,5 ±0,1
2,5 ±0,1
25,5
24,6
25,5
13
101,
6±0
,3
9,5
19,05
2,5
2,8
4,7
76,2 ±0,3
3
8,100
1
10,300
7
BUTT HINGE “ROUND”
BUTT HINGE “SQUARE”
BUTT HINGE “FLUSH”
Material : Stainless Steel 304Size: 102 x 76 x 3 mmScrew hole: Ø7 mmw/4 ss-washers
Item No. # 15.20.116
Material : Stainless Steel 304Size: 102 x 76 x 3 mmScrew hole: Ø7 mmw/4 ss-washers
Item No. # 15.20.115
Material : Stainless Steel 304Size: 100 x 70 x 2,5 mmScrew hole: Ø7 mmw/2 ss-ball bearing washers
Item No. # 15.20.100
MODEL ”SQUARE”
MODEL ”ROUND”
MODEL ”FLUSH”
- high quality furniture fittings
55
26±0
,15
27±0
,15
25 ±0,15
79±0
,2
12,5 ±0,15
26±0
,15
19,5 ±0,15
4 x R12,5
100
±0,2
16
88
3 1
10
10,3
26±0
,15
27±0
,15
25 ±0,15
79±0
,2
12,5 ±0,15
26±0
,15
19,5 ±0,15
4 x R12,5
100
±0,2
1610,3
88
31
10
DOOR HINGES SS-304 (HEAVY DUTY)
BUTT HINGE “LIFT OFF” LEFT
Material : Stainless Steel 304Size: 100 x 88 x 3 mmScrew hole: Ø7 mmw/1 ss-ball bearing washers
Item No. # 15.20.105
BUTT HINGE “LIFT OFF” RIGHT
Material : Stainless Steel 304Size: 100 x 88 x 3 mmScrew hole: Ø7 mmw/1 ss-ball bearing washers
Item No. # 15.20.106
MODEL ”LIFT-OFF RIGHT”
MODEL ”LIFT-OFF LEFT”
- high quality furniture fittings
56
16
48,5
82,51625
25
Height adjustment screw M4+ 2 mm
Ø 6,5
Ø 7,7
M 8,8
M 4
M 4
PIN DOOR HINGE (HEAVY DUTY)
Aplication: For heavy duty doors w/height adjustment function.
Size: Ø16 x 82,5 mm (25-16-25 mm)
Material: Steel
Finish: Yellow Zinc Plated (YZP)
Item No. # 15.08.000
Other sizes on request
2 mm height adjustment
Hex key to be ordered separately
- high quality furniture fittings
57
PIN DOOR HINGE (HEAVY DUTY)
Application: For heavy duty doors w/height adjustment function.
Material: Steel
Size: Ø14 x 82 mm (25-18-25 mm)
Finish: Yellow Zinc Plated (YZP) # 15.07.950 Bright Zinc Plated (BZP) # 15.07.951
Size: Ø16 x 82 mm (25-18-25 mm)
Finish: Yellow Zinc Plated (YZP) # 15.08.005 Bright Zinc Plated (BZP) # 15.08.006
Other sizes on request
Application: Cover for pin door hinge
Material: Aluminium
Size: Ø14 x 46,5 mm
Finish: Chrome Plated (CPL) # 15.07.955 Aluminium finish # 15.07.956
Size: Ø16 x 46,5 mm
Finish: Chrome Plated (CPL) # 15.08.010 Aluminium finish # 15.08.011
Other finishes on request
Drilling Jig: # 15.07.970
ALUMINIUM COVER CAP & DRILLING JIG
Chrome Plated Aluminium finish
16
55
821825
25
Height adjustment screw M3+ 4 mm
Ø 7,7
Ø 8,6
M 4
M 4
14
53,5
821825
25
Height adjustment screw M3+ 4 mm
Ø 7,7
8,3
M 4
M 4
Ø14 Ø 16
Drilling Jig 15.07.970
- high quality furniture fittings
58
VICI DOOR HINGE (HEAVY DUTY)
3-D ADJUSTMENTApplication: For heavy duty doors w/3-D adjustment function.
Door thickness: Min. 30 mm (15.08.100 & 15.08.105) Min. 40 mm (15.08.110 & 15.08.115)
Opening: 180 degree
Max. door size: W:1000 x H:2700 mm (max. 60 kg. 3 hinges)
Material: Zamak
Size: 95 x 23,3 x 29,6 mm (L/W/D)
Finish: Aluminium finish, left hand # 15.08.100 Aluminium finish, right hand # 15.08.105
Size: 111,5 x 29 x 36 mm (L/W/D)
Finish: Aluminium finish, left hand # 15.08.110 Aluminium finish, right hand # 15.08.115
10
23,3 23,3
min 600 mm
3030
4 3 4
2
4
S
4
A
79 959595 60
4,525,1 23,3 23,312
Ø5,5
15,65
23,3
4
90
2
60
R11,7Ø5,5 Ø14
min 30,5
4,5
BoreBore
91,5 111,5111,5111,5 69,5
630 29 2916
Ø5,2
19,5
29
5
90
2
69,5
R14,5Ø5,2 Ø14
min 37
6
10
29 29
min 600 mm
3737
6 3 6
5
3
5
SA
Size: 111,5 x 29 x 36 mm Size: 95 x 23,3 x 29,6 mm
Left hand modelRight hand model
Size A is calculated using door thickness +3 mm+gasket thickness. S = min. 40 mm
Size A is calculated using door thickness +2 mm+gasket thickness. S = min. 30 mm
Size: 111,5 x 29 x 36 mm Size: 95 x 23,3 x 29,6 mm
- high quality furniture fittings
59
NOTES
- high quality furniture fittings
Mileparken 11DK - 2740 Skovlunde (Copenhagen)
Denmark
Phone: (+45) 45 830 900Fax: (+45) 45 830 444 E-mail: [email protected] Web: www.siso.dk
SISO A/S
Item N
o.: 99.00.006-0 19.08.2013