sk ap-o - raden.su · sk ap-o din 8555 : mf 7-gf-200-kp asme iic sfa 5.21 : femn-cr all purpose...
TRANSCRIPT
![Page 1: SK AP-O - raden.su · SK AP-O DIN 8555 : MF 7-GF-200-KP ASME IIC SFA 5.21 : FeMn-Cr All purpose alloy, rebuilding and joining of Carbon and 14% Manganese steels, buffer layer prior](https://reader030.vdocument.in/reader030/viewer/2022021809/5c5dcfe909d3f2c6418b777d/html5/thumbnails/1.jpg)
SK AP-ODIN 8555 : MF 7-GF-200-KPASME IIC SFA 5.21 : FeMn-Cr
All purpose alloy, rebuilding and joining of Carbon and 14% Manganese steels, buffer layer prior to deposit hard overlay.
DESCRIPTION1
Railway rails and crossovers, mill shaft drive ends, gyratory crusher mantles, repointing of shovel teeth, buffer layer for inter-particles crushers.
SUITABLE FOR2
TYPICAL CHEMICAL ANALYSIS (WEIGHT %)3
C Mn Si Cr Fe
0.37 16.0 0.4 12.80 Bal.All Weld
TYPICAL MECHANICAL PROPERTIES4
Hardness as welded
205 HB
GENERAL CHARACTERISTICS5
Austenite���� Microstructure
Good with metallic carbides tipped tools���� Machinability
Cannot be flame cut���� Oxy-acetylene cutting
As required���� Deposit thickness
���� Flux cored
The information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can't assume any form of liability concerning the exactness of it. The information may be changed or updated
without previous notice. The user is invited to test the product with regard to his own application and responsibility.
Revision : 200507260937
@SOUDOKAY SA RUE DE L'YSER 2 B-7180 SENEFFE BELGIUM soudokay soudokay.comsoudokay.be www.| | | | | |
SALES: +32 (0)64 51 02 25
+32 (0)64 51 02 21
|
F
LOGISTICS: +32 (0)64 51 02 10
+32 (0)64 51 02 19
|
F
FINANCE: +32 (0)64 52 00 30
+32 (0)64 52 00 31
|
F
T T T
![Page 2: SK AP-O - raden.su · SK AP-O DIN 8555 : MF 7-GF-200-KP ASME IIC SFA 5.21 : FeMn-Cr All purpose alloy, rebuilding and joining of Carbon and 14% Manganese steels, buffer layer prior](https://reader030.vdocument.in/reader030/viewer/2022021809/5c5dcfe909d3f2c6418b777d/html5/thumbnails/2.jpg)
SK AP-ODIN 8555 : MF 7-GF-200-KPASME IIC SFA 5.21 : FeMn-Cr
WELDING PARAMETERS & ECONOMICAL DATA6
Diameter[mm]
Article code
AvailabilityPackagingCurrent[A]
Voltage[V]
Stick-Out
1,2 120-150 26-30 35-40 29445 StandardSpool 15 Kg
1,6 180-200 26-30 35-40 29446 StandardSpool 15 Kg
2,4 250-300 26-30 35-40 24979 StandardSpool 15 Kg
2,8 300-350 26-30 35-40 29448 StandardSpool 15 Kg
2,8 300-350 26-30 35-40 31713 StandardCoil 25 Kg
2,8 300-350 26-30 35-40 29449 On requestAutopack 150 Kg
2,8 300-350 26-30 35-40 29450 StandardAutopack 250 Kg
The information about the products contained in the data sheets are based on intensive tests and careful investigations. However we can't assume any form of liability concerning the exactness of it. The information may be changed or updated
without previous notice. The user is invited to test the product with regard to his own application and responsibility.
Revision : 200507260937
@SOUDOKAY SA RUE DE L'YSER 2 B-7180 SENEFFE BELGIUM soudokay soudokay.comsoudokay.be www.| | | | | |
SALES: +32 (0)64 51 02 25
+32 (0)64 51 02 21
|
F
LOGISTICS: +32 (0)64 51 02 10
+32 (0)64 51 02 19
|
F
FINANCE: +32 (0)64 52 00 30
+32 (0)64 52 00 31
|
F
T T T