Downloaderouting-skill-exam-ccna-2.pkt file

A. THEABCORGANIZATIONHAS3 SITESIN HOANKIEM,BAVI ANDHOTAYDISTRICTS.YOU

HAVETO PERFORMTHE TASKS:

1. All routers and PCs are assigned the correct IP Address scheme.

2. All PCs can connected to the web server google.com in the Internet.

3. All 5 PCs can communicate each others.

B. PERFORMINGTHETASKSFOLLOWTHIS PARAMETERSANDCONFIGURATION:

1. Basic configuration: 

Overall requirements: all network segments in the network diagram can connect

to each other (example: ping and traceroute work for to reach all devices and

PCs); users can telnet to get access to router CLI.

Router name

IP addressand subnetmask

Clockrate:64000

Password

The console, AUX, VTY lines are protected by clear text password

(Unencrypted), password=”cisco”.

Set the enable password to enter privileged mode,

password=”cisco”.

Set the secret password to enter privileged mode,

password=”class”.

• MOTDBannerand descriptions

MOTD Banner contains the name of the student who configures it.

Example: “Hello, this is Ho Tay R1, configured by Nguyen Van A” .

Description of interface contains the name of the device it connects

to. Example:“Connect to router Ba Vi” .

• PCs:Set the PC’s IP addresses, subnet masks, and default gateways.

2. Routing: 

 

• R1 and R2 share the routing information using RIPv2 .

• R4 and R5 share the routing information using EIGRP 99 (configure

Network command with wildcard mask).

• R2, R5 and R6 share the routing information using OSPF 1 area 0 .

Using Authentication type MD5 with keyID 178 , key

string cisco178 .

In the multi-access network:

R6 is DR (priority 6)

R5 is BDR (priority 5)

R2 is DROther (priority 1)

• Between RIPv2, EIGRP and OSPF areas configure redistribute where

necessary with the metric.

• To RIPv2: metric 5.

• To EIGRP: bandwidth 1544, delay 20000, reliability 255, load 1,

MTU 1500.

• All routers have default route to the Internet.

• R6 share to all routers a summary route to the extended LANs, that it can

connect via interface FastEthernet 0/1.

2. IP Address: 

• RIPv2 area: 147.65.X.0/24

• OSPF 1 area: 178.204.X.0/24

• EIGRP 99 area: 160.99.X.0/24

Note: 

• X value is map to Switch ID 

• Subnetwork between routers R1, R2: X=12 

• Subnetwork between routers R4, R5: X=45 

• Multi-access network between R2, R5, R6: X=3 

• Router’ Interface are assigned IP address with the 4th octet is

RouterID. For Example: interface S0/0/0 of router HoTay_R5 has ip 

address: 160.99.45.5 where 3rd octet X=45, 4th octet=5 (on R5).

• PCs have IP address with the 4th octet is 50. For Example: PC4: 

160.99.4.50 

3. Copy all router configuration to TFTP server using default file config name 

Note: 

• To pass this exam, student have to correct all connectivity tests and have 

more than 70 points

• To see connectivity test -> Check results -> Connectivity test 

Router BaVi_R1

(config)#router rip

(config-router)#version 2

(config-router)#no auto-summary

(config-router)#network 147.65.1.0

(config-router)#network 147.65.12.0

 

Router BaVi_R2

(config)#router rip

(config-router)#version 2

(config-router)#no auto-summary

(config-router)#network 147.65.2.0

(config-router)#network 147.65.12.0

(config-router)#redistribute ospf 1

(config)#router ospf 1

(config-router)#network 178.204.3.0 0.0.0.255 area 0

(config-router)#redistribute rip metric 5 subnets

(config)#interface fa0/0

(config-if)#ip ospf priority 1

(config-if)#ip ospf authentication message-digest

(config-if)#ip ospf message-digest-key 178 md5 cisco178

Router HoTay_R4

(config)#router eigrp 99

(config-router)#network 160.99.4.0 0.0.0.255

(config-router)#network 160.99.45.0 0.0.0.255

Router HoTay_R5

(config)#router eigrp 99

(config-router)#network 160.99.5.0 0.0.0.255

(config-router)#network 160.99.45.0 0.0.0.255

(config-router)#redistribute ospf 1 metric 1544 20000 255 1 1500

(config)#interface fa0/0

(config)#router ospf 1

(config-router)#network 178.204.3.2 0.0.0.255 area 0

(config-router)#redistribute eigrp 99 subnets

(config)#interface fa0/0

(config-if)#ip ospf priority 5

(config-if)#ip ospf authentication message-digest

(config-if)#ip ospf message-digest-key 178 md5 cisco178

 

Router HoanKiem_R6

(config)#ip route 0.0.0.0 0.0.0.0 s0/0/0

(config)#ip route 172.0.0.0 255.128.0.0 fa0/1

(config)#router ospf 1

(config-router)#network 178.204.3.0 0.0.0.255 area 0

(config-router)#network 178.204.6.0 0.0.0.255 area 0

(config-router)#redistribute static subnets

(config-router)#default-information originate

(config)#interface fa0/0

(config-if)#ip ospf priority 6

(config-if)#ip ospf authentication message-digest

(config-if)#ip ospf message-digest-key 178 md5 cisco178