7. Level 2 Repair

7-1

Confidential and proprietary-the contents in this service guide subject to change without prior notice.Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Remove the 2 screws.Check know where is Locking before removing the Locking.In addition, prepare the Locking Remove Tool.

Remove along the indicated lines the Locking asshown in the above figure. Remove the QRE01.

disassembly

1 2

3 4

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-2

Please lifted the QAN01 using the Lock Remove Toolas shown in the above figure. Remove the QAN01.

Remove the 3 screws and 1 Connector. Remove the QRE15.

5 6

7 8

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-3

Remove the 8 screws. Check know where is Locking before removing the Locking

Remove along the indicated lines the Locking asshown in the above figure. Remove the QFR02.

9 10

11 12

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-4

Take care not to lose the QRF01, QCK02, QVK01,QMI01, QBC01. Remove the QBR01 and then removing the 2 Connector.

Remove the QCA01.

Check electric shock point before removing the QCA07.- If you do not have a discharger, be careful forelectric shock when removing it.- If you have a discharger, It must be processed fordischarge to the main condenser as shown in the abovepicture.

13 14

15 16ASSY-BARREL

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-5

Remove the 1 screw and 1 Connector. Remove the QCA07.

Remove the 2 Connector and QCB01(CBF COAXIALCABLE).Take care not to damage the FPCB when removing TSPFPCB from the Connector.

Remove the QMP01.

17 18

19 20

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-6

Remove the 2 screws. Remove the QMI02, QSP01.Take care not to lose the QMI02

Remove the 2 screws and 1 Connector, QCB01(CBF COAXIAL CABLE).

Remove the QME02, QRF03.Take care not to lose the QRF03.

21 22

23 23

ASSY-SUB-RF PCB

ASSY-SPK

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-7

Remove the 2 QCB01. Pluck the using the tweezers the QBL05(PIN BATTERY COVER)

Remove the QBL05, QBL07, QBL01.Take care not to lose the QBL07, QBL05 Remove the using the Locking Remove Tool the 2 Locking.

24 25

26 27

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-8

Remove the QBL04 and then removing QBL06,QMO01. Take care not to lose the QBL06.

The QFM01, QCA02, QME04 are remove in order of numberson the QFR01.

29 30

ASSY-CAMERAVT CAM

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-9

The QME04, QCA02, QFM01 are assemble in order ofnumbers unto the QFR01. Assemble the QBL06, QMO01 and then assemble QBL04.

Check the assembled of 2 LOCKING. Assemble the QBL05, QBL07, QBL01.

1 2

3 4

Assembly

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-10

Insert the QCB01 in the groove.

Assemble the QRF03 on the QME02 and then assemble theQME02. When assembling, assemble so that the bothendsside teminal of CBF COAXIAL CABLE can come out to thequtside of the QME02.

Tightening the 2 screws and assemble the 1Connector, QCB01 (CBF COAXIAL CABLE).

Assemble the QMI02 on the QSP01 and then assemble theQSP01. When assembling, assemble so that the oneterminals of CBF COAXIAL CABLE in remaining can come outto the outside of the QSP01.

5 6

7 8

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-11

Tightening the 2 screws.Assemble the QMP01. When assembling, assemble so that theone terminals of CBF COAXIAL CABLE in remaining can comeout to the outside of the QMP01.

Assemble the 2 Connector and QCB01(CBF COAXIALCABLE). Take care not to damage the FPCB whenAssembling TSP FPCB from the Connecotor

Assemble the QCA07.

9 10

11 12

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-12

Tightening the 1 screw and assemble 1 Connector. Assemble the QCA01.

Assemble the 2 Connector and then attach the QBR01.-When place the barrel be carful of FPCB crackaround the Barrel.

Assemble the QFR02, QRF01, QCK02, QVK01, QMI01, QBC01.-Please check whether the components of the above pictureare altogether assembled.

13 14

15 16

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-13

Assemble the QFR02. Please along the indicated lines the Locking and assembleas shown in the above figure.

Tightening the 8 screws. Assemble the QRE15.

17 18

19 20

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-14

Tightening the 3 screws and then assemble 1Connector. Assemble the QAN01.

Assemble the QRE01. Press along the indicated lines the Locking and assembleas shown in the above figure.

21 22

23 24

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-15

Tightening the 2 screws.

25

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-16

Camera Adjustment

Adjustment List Must do CAMERA adjustment, when Main PCB or Barrel ASSY is exchanged.

Section Sub SectionRepair Part

ETCMain PCB Lens Barrel

Adjustment #1 Color ShadingDefect Pixel Correction a sheet of white paper

Adjustment #2(optinal) Color Shading

Only if a fifth picture has a purplecolor or black shadow on 4

corner,

Equipment List

Program Installation- 1. Adjustment Program Installation

1) Unzip GC_Adj_v3.2.2 SCV.zip file provided2) Open GC_Adj_v3.2.2 SVC folder

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-17

3) Install vcredist_x86.exe file(Needed ONLY ONCE at the first time)

Adjustment- 1. Set up for adjustment

1.1 How to connect it

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-18

1.2 Setup for Adjustment1) Check COM Port number of USB Serial Port. (Control Panel Equipment Operator)

2) Execute shortcut file GCMot3.2.2_SCV in adjustment_z4_zoom

3) Connect COM Port by click SET UP button

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-19

4) Re-run after closing program

If you changed USB cable port, you Should setup again.

5) Copy "c101_shading_data.bin" to SD card and insert it to the product.6) Power off the product.7) Connect the product to Anyway Jig with power off.

Do not connect the product power on to Anyway Jig.Connecting the product to Anyway Jig make it turn on .

8) The product turn itself on.

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-20

This is set-up recommendation of Shading Adjustment. If you don't have any tripod, you can hold theproduct by hand in front of a sheet of white paper

1.3 Shading Adjustment1) Click the FILE button to open Script file.

2) Select M_WriteDefaultTable.txt( PATH : adjustment_s4_zoom > adj_script >M_WriteDefaultTable.txt )

3) Put a sheet of white paper in front of camera.

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-21

4) Click the START button to start adjustment.

5) Result of adjustment is displayed once.

(This process takes about 4 mins.)

6) Pull out SD memory card and check the picture data in.

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-22

( PATH : DCIM > Camera > SAM_xxxx.jpg)

7) Open the last picture among 5 pictures.(First picture would be #1 and the last picture would

be #5.)

8) Check 4 corner on which there is purple color or black shadow. If there is like NG image

below, go to "11)" or isn't, go to "9)

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-23

9) If the purple color or black shadow is not so serious like OK images below, please close

factory mode by key strings.

10) Trun on telephone app and insert *#87976633#, then restart the product. This is for changing

mode from factroy to user.

11) If there is purple color or black shadow on one of 4 corner in the lase image, please checkthe other pictures and select best image. (Please refer OK image above.)

12) Re-adjust the product with the best image data.13) Click the FILE button to open Script file.

Level 2 Repair

Distribution, transmission, or infringement of any content or data from this document without Samsungs written authorization is strictly prohibited.

Confidential and proprietary-the contents in this service guide subject to change without prior notice.

7-24

14) Select the script file of best image.(The best image number is related with script name.)

=> If second picture is best, then select s_final_2.txt

15) Click the STARTbutton to start adjustment

16) Result of adjustment is displayed once.17) Restart the product.