small form factor dvi fiber extender … · b-lc ard ct er e nt. a. al in2 in8 in6 in4 e ard e ard...
TRANSCRIPT
DVI-OPT-RX110DVI-OPT-TX110
1/3
DVI-OPT-TX110 and DVI-OPT-RX110
Peterdy 15, Budapest H-1071, Hungary +36 1 255 3800 [email protected] www.lightware.eu
Small form factor DVI fiber extender SingleFiberTechnology – Zero delay
DVI-OPT-TX110 and DVI-OPT-RX110 pair is a DVI to fiber transmitter / receiver set for up to 2500 m distance transmission. Using Single Fiber Technology the DVI-D signal is transmitted over only one multimode 50/125 fiber core. Sources and display devices are galvanically isolated against ground loops and hum effects, and no delay occurs in the signal, the video image is transported without any frame latency.
Cross compatibility between Lightware fiber products is ensured thanks to our attentive design. In a standalone application DVI-OPT-TX110 and DVI-OPT-RX110 can work together simply, but with Lightware’s hybrid modular matrix concept, it is even possible to connect these extender units directly to the matrix router using an MX-DVI-OPT series input or output board.
Galvanic isolation between source and display helps to avoid ground loops and hum effects. No delay occurs in the signal during optical conversion, the video image is transported without any frame latency. Powered from DVI source the DVI-OPT-TX110 transmitter does not need external power adaptor simplifying system installation. Transmitter is shipped with a preprogrammed factory default EDID with can be restored any time.
Part No: 9151 0001 (TX110), 9151 0002 (RX110)
Highlight features ■ DVI connector sized extenders ■ Several status LEDs ■ Single Fiber Technology, zero frame delay ■ New and more stable SC connector avoids
accidental unplugging
Transmitter and receiver benefits
Transmitter powered through +5V pin from DVI source
Power LED lights only if the supply is sufficient.
Improved ESD protection forreliable operation.
EDID status LED shows validity and learn operation.
Power, Monitor Hotplug, Incoming laser detect LEDs.
Button for EDID learn and factory default EDID restore.
Solid aluminum casing, improved cooling and reliability.
New and more stable SC connector avoids accidental unplugging.
Recessed and slotted thumbscrews for easy installation.
MX-DVI-OPT-IB-LC
8CH OPTICAL INPUT BOARDLASER DETECT
RECEIVER ACTIVE
SIGNAL PRESENT
L. D.
R. A.
SIGNAL
IN1
IN
2
IN7
IN
8
IN5
IN
6
IN3
IN
4
SC 50/125 MULTIMODE
8CH OPTICAL INPUT BOARD
SC 50/125 MULTIMODE
8CH OPTICAL INPUT BOARD
IN1
IN2
IN7
IN
8
IN5
IN6
IN3
IN4
LASER DETECT
RECEIVER ACTIVE
SIGNAL PRESENTMX-DVI-OPT-IB-ST
4 CH DUAL LINK DVI INPUT BOARD
MX-DVIDL-IB
LC 50/125 MULTIMODE
LASER DETECT
RECEIVER ACTIVE
SIGNAL PRESENT
L. D.
R. A.
SIGNAL
IN1
IN
2
IN7
IN
8
IN5
IN
6
IN3
IN
4
IN1
IN
2
IN7
IN
8
IN5
IN
6
IN3
IN
4
LASER DETECT
RECEIVER ACTIVE
SIGNAL PRESENTMX-DVI-OPT-IB-SC
OUT1
OUT2
OUT7
OUT8
OUT5
OUT6
OUT3
OUT4
8CH OPTICAL OUTPUT BOARD
8CH OPTICAL OUTPUT BOARD
SC 50/125 MULTIMODE
SC 50/125 MULTIMODE
MX-DVI-OPT-OB-ST
LASER DETECT
SIGNAL PRESENT
L. D.
SIGNAL
MX-DVI-TP-OB
8CH OPTICAL RECLOCKING
OUTPUT BOARD
MX-DVI-OPT-OB-NT
LASER DETECT
SIGNAL PRESENT
L. D.
SIGNAL
OUT1
OUT2
OUT7
OUT8
OUT5
OUT6
OUT3
OUT4
MX-DVI-OPT-OB-LC
8CH OPTICAL OUTPUT BOARDLASER DETECT
L. D.
L. D.
OUT1
OUT2
OUT7
OUT8
OUT5
OUT6
OUT3
OUT4
LASER DETECT
MX-DVI-OPT-OB-SC
OUT1
OUT2
OUT7
O
UT8
OUT5
O
UT6
OUT3
O
UT4
RS-232
LOCAL CONTROL
RoHS
Made in EU, HU
Service LANSC MM OUT DC 5V
Power cable
5V DC PowerAdaptor
5V DC PowerAdaptor
Power cable
DVI cableDVI
cable
DVI cable
DVI cable
DVI cable
DVI cable
PC or MAC
PC or MAC
PC or MAC
PC or MAC
DVI Monitor
DVI Monitor
DVI Monitor
Projector
Projector
Projector
DVI-OPT-TX110
DVI-OPT-TX110
DVI-OPT-RX110
DVI-OPT-RX110
DVI-OPT-TX220-Pro
DVI-OPT-RX220-Pro
NEUTRIK multimodefiber cable up to
2500m
NEUTRIK multimodefiber cable up to 2500m
Single fiber multimode
optical cableup to 2500m
Single fibermultimodeoptical cable up to 2500m
Single fiber multimodeoptical cable up to 2500m
Lightware hybrid modular matrix
2/3
DVI-OPT-TX110 and DVI-OPT-RX110
Peterdy 15, Budapest H-1071, Hungary +36 1 255 3800 [email protected] www.lightware.eu
Recessed thumbscrews allow easy mounting directly to DVI receptacle by hand, or by using a flat-bladed screwdriver. This is most useful in space constraint applications, where the connectors are too close, and can be reached only from the rear side. Massive solid aluminum casing provides excellent cooling and maximum reliability.
Integrated system operation
Stand alone operation
Features ■ Extends DVI-D signals with Single Fiber Technology ■ 1920x1200 or 2048x1080 maximal resolutions ■ Cross compatibility with Lightware Fiber devices ■ Plug & Play ■ Zero frame latency – No delay ■ No compression ■ EDID emulation in TX110 ■ TX Status LEDs: Accurate power detection, EDID state ■ RX Status LEDs: Power, laser detect, hotplug detect ■ External universal power adaptor for receiver ■ Power supplied through DVI connector for transmitter ■ DVI connector sized form factor ■ Solid aluminum housing for professional use ■ Recessed (slotted) thumbscrews ■ Improved ESD protection ■ Improved mechanical stability SC connectors ■ Secure snap DC plug ■ Restorable factory default EDID
Applications ■ Professional AV systems, conference rooms ■ Fixed installations, Rental and Staging ■ Digital signage ■ Long distance lossless DVI signal transmission ■ Ground loop isolation
3/3
DVI-OPT-TX110 and DVI-OPT-RX110
Peterdy 15, Budapest H-1071, Hungary +36 1 255 3800 [email protected] www.lightware.eu
Supplied accessories
PSU-5VS Universal DC adaptor (Part No: 1180 0050)Wall power adaptor with interchangeable plug for international use.Universal input: 100-240 V AC, 50-60 HzOutput: 5 V DC, 1 A
USB DC power cable (Part No: 1373 0009)USB DC power cable one end is a male USB-A connector that can plug to a USB port, another end is a round shape male connector that can fit the extender’s DC input.
Compatibility table ■ http://www.lightware.eu/pdfs/fiber_extension_cross_comp.pdf
SpecificationsData rate: 1.65 Gbps per color
Max resolution: 1920 x 1200 or 2048 x 1080 pixels
Video delay: 0 frames
HDCP pass through: No
EDID emulation: Yes, EDID learning by button
EDID memory: 1 user programmable EDID in transmitter
EDID support: 256 Byte Extended EDID v1.3
Front panel control: EDID learn buttonLED indicators (transmitter): Power, source connected,
signal present, laser activeLED indicators (receiver): Power, laser detect, signal present,
monitor connectedRS-232 pass through: No
Fiber: 50/125 SC MultimodeLaser wavelengths: 4 ch. CWDM: 778; 800; 825; 850 nm
(high speed)Laser class specification: Class 3
Transmitter output OMA*: -6.25 dBm (worst case)
Receiver OMA* sensitivity: -14.25 dBm (worst case)
Optical loss budget: 8 dB (worst case)
Transmission distance: 2500 m (using OM4 type fiber)Power supply: External power adaptor (100 to 240 V AC,
50/60 Hz)(5V DC, 1 A)Power consumption (transmitter): 1.4 W
Power consumption (receiver): 0.8 W
Enclosure: Solid aluminum
Dimensions: 39 W x 87,5 D x 15,4 H mm
Net weight (transmitter): 95 g
Net weight (receiver): 95 g
Compliance: CE
Warranty: 3 years
OMA*:Optical Modulation Amplitude
Maximum extension distancesOM1
(62,5/125)OM2
(50/125)OM3
(50/125)OM4
(50/125)1080p@60Hz 24 bpp 250 m 600 m 1200 m 2500 m
ConnectorsTX input , RX output: 24 pole DVI-D plug
DC Power: 1.35 / 3.5 mm barrel receptacle
Fiber: SC simplex