smartpaks 240 volt to 24 volt interface boards brochure

Smart Pak 240 VAC to 24V Interface Board M aking Lif e Com for table Features • LED indication of relay Status • Available in a 3, 4 or 5 relay version • Quality “non strip” Terminals • 15 Amp fan relay* • 10 Amp equipment relays* • 240VAC and 24VAC fused • Safety covers fitted to fuses • Secure 4 point mounting • Tough Non Twist Base • Heat Pump select switch • Proudly Manufactured in Australia • Full drawings provided • 1 Year Warranty General Description The Smart Pak (TM) has been designed where 240VAC equipment must be controlled by a 24V thermostat. This simple to install interface isolates low and high voltages through relays therefore ensuring that there is no voltage leakage between the equipment and controller. The Smart Pak has been fitted with LED indicators to provide visual indication of each relays status. This is a valuable aid during system commissioning or when fault finding a previous instillation. The highest quality components and the latest design and manufacturing techniques have been employed in the construction of the Smart Pak. The quality of this construction is reflected in the unconditional two year return to factory warranty offered by Smart Temp. The Smart Pak is fitted with a selector switch that gives the Smart Pak the unique ability to control a Heat Pump system using a standard Heat/Cool thermostat. A useful feature when a installation, for what ever reason dictates the use of a normally incompatible thermostat. A specially constructed base has been used to provide secure mounting of the Smart Pak. This base has a reinforced mounting point in each corner which is designed to take the stress of mounting the Smart Pak using power tools and tech screws without damaging the Smart Pak PCB or other components. The Smart Temp Smart Pak has been designed with the electrical installer in mind. It has been built to be simple to understand, simple to install and very reliable in performance. Further, it has been designed and built in Australia to comply with Australian rules and requirements. Specifications Size 147x 90 x 45mm Weight 350g Fused 240VAC - 15 Amp 24VAC - 500mA Mounting 4 x 7mm reinforced holes Relays Fan - 15Amp contact rating Equip - 10 Amp contact rating Selectors Heat pump Emulation mode Full on mode (Smart Pak 3 only) Smart Pak 03

Upload: smarttempcomau

Post on 11-Apr-2015

63 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

DESCRIPTION

The Smart Temp Smart Pak has been designed where 240VAC equipment must be controlled by a 24V thermostat. This simple to install interface isolates low and high voltages through relays therefore ensuring that there is no voltage leakage between the equipment and controller.The Smart Pak has been fitted with LED indicators to provide visual indication of each relays status. This is a valuable aid during system commissioning or when fault finding a previous instillation.The highest quality components and the latest design and manufacturing techniques have been employed in the construction of the Smart Pak. The quality of this construction is reflected in the unconditional two year return to factory warranty offered by Smart Temp.The Smart Temp Smart Pak has been designed with the electrical installer in mind. It has been built to be simple to understand, simple to install and very reliable in performance. Further, it has been designed and built in Australia to comply with Australian rules and requirements.The Smart Temp Smart Pak is fitted with a selector that gives the Smart Pak the unique ability to control a Heat Pump system using a standard Heat/Cool thermostat. A useful feature when a installation, for what ever reason dictates the use of a normally incompatible thermostat.A specially constructed base has been used to provide secure mounting of the Smart Pak. This base has a reinforced mounting point in each corner which is designed to take the stress of mounting the Smart Pak using power tools and tech screws without damaging the Smart Pak PCB or other components.For more information please visit www.smarttemp.com.au.

TRANSCRIPT

Page 1: Smartpaks 240 Volt to 24 Volt Interface Boards Brochure

Smart Pak240 VAC to 24V Interface Board

Making Life Comfortable

Features• LED indication of relay Status• Available in a 3, 4 or 5 relay version• Quality “non strip” Terminals• 15 Amp fan relay*• 10 Amp equipment relays*• 240VAC and 24VAC fused• Safety covers fitted to fuses• Secure 4 point mounting• Tough Non Twist Base• Heat Pump select switch• Proudly Manufactured in Australia• Full drawings provided• 1 Year Warranty

General Description

The Smart Pak(TM) has been designed where 240VACequipment must be controlled by a 24V thermostat. This simple to install interface isolates low and high voltages through relays therefore ensuring that there is no voltage leakage between the equipment and controller.

The Smart Pak has been fitted with LED indicators to provide visual indication of each relays status. This is a valuable aid during system commissioning or when fault finding a previous instillation.

The highest quality components and the latest design and manufacturing techniques have been employed in the construction of the Smart Pak. The quality of this construction is reflected in the unconditional two year return to factory warranty offered by Smart Temp.

The Smart Pak is fitted with a selector switch that gives the Smart Pak the unique ability to control a Heat Pump system using a standard Heat/Cool thermostat. A useful feature when a installation, for what ever reason dictates the use of a normally incompatible thermostat.

A specially constructed base has been used to provide secure mounting of the Smart Pak. This base has a reinforced mounting point in each corner which is designed to take the stress of mounting the Smart Pak using power tools and tech screws without damaging the Smart Pak PCB or other components.

The Smart Temp Smart Pak has been designed with the electrical installer in mind. It has been built to be simple to understand, simple to install and very reliable in performance. Further, it has been designed and built in Australia to comply with Australian rules and requirements.

Specifications

Size 147x 90 x 45mmWeight 350gFused 240VAC - 15 Amp 24VAC - 500mAMounting 4 x 7mm reinforced holesRelays Fan - 15Amp contact rating Equip - 10 Amp contact ratingSelectors Heat pump Emulation mode Full on mode (Smart Pak 3 only)

Smar

t Pak