Solcellspaket - Poly & Mono (Novotegra -Tegel - 18=3x6)

System PlanCreated with Solar-Planit by Mikael JohanssonSolelgrossisten AB in 272 36 Simrishamn.

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 2 / 19

ProjectSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

YOUR PHOTOVOLTAIC SPECIALIST

Company Solelgrossisten ABContact Mikael JohanssonAddress Testgatan1

272 36 SimrishamnPhone +46733343627Email mikael.johansson@solelgrossisten.se

CUSTOMER

NameAddress

SYSTEM INFORMATION

Number of Modules 18System Output 4.77 kWpModules 18 x Jinko Solar JKM265PP-60

(4.77 kWp)

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 3 / 19

Project Information - BuildingSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

RoofRoof Type Pitched RoofRidge to eaves (m) 6.000Ridge Length (m) 10.000Roof Inclination (°) 30.00Building Height (m) 6.000Protrusion of bargeboard (m) 0.000Protrusion of eaves (m) 0.000Building Width (m) 10.392Building Length (m) 10.000Roof Orientation (°) 0.00

Roof CoveringType of Roof Covering TileType of tile Pan TileTile Length (cm) 40.00Batten Spacing (cm) 32.50Batten Height (cm) 3.00Counter batten height (cm) 3.00Counter batten width (cm) 4.80Use additional woods yesInsulation Height (cm) 0.00Underlay thickness approx. (cm) 0.00Overlap (cm) 7.50

SubstructureSubstructure Rafter (Wood)Rafter Distance (cm) 120.00Number of Rafters 9Rafter Width (cm) 6.00Rafter Height (cm) 17.00Distance first Rafter (cm) 17.00Distance last Rafter (cm) 17.00

LocationCountry SwedenTerrain Category III Villages, suburbsAltitude (m.a.s.l.) 64Windload Zone 24Snowload Zone 2

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 4 / 19

Project Information - ArraySolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Module Field Array 1Module Jinko Solar JKM265PP-60Number of modules 18L / W / H (mm) 1650 / 992 / 40Weight (kg) 19.0Power 4.77 kWpMounting system Flush 1 layered PortraitLayout (rows x columns) 3 x 6

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 5 / 19

ModulesSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

ModuleJinko Solar

Jinko Solar JKM265PP-60

Electrical DataNominal Output Power Pmpp (Wp) 265Max. Power Tolerance (%) +3/-0Maximum Power Voltage (V) 31.4Maximum Power Current (A) 8.44Open Circuit Voltage Uoc (V) 38.6Short Circuit Current Isc (A) 9.03Temperature Coefficient Pmpp (%/°C) -0.4Temperature Coefficient Isc (%/°C) 0.06Temperature Coefficient Voc (%/°C) -0.3Cell Efficiency (%) n/aModule Efficiency (%) 16.19

Extreme ValueMax. System Voltage (V) 0Max. Suction Load (N/m²) 2400Max. Compression Load (N/m²) 5400Max Reverse Current (A) 0Series fuse rating (A) 15

Dimensions and WeightModule Area (m²) 1.637Module Length (mm) 1650Module Width (mm) 992Frame Thickness (mm) 40Mounting Hole Diameter (mm) 5.0Weight (kg) 19.0

SpecificationsConnection Type MC4Cable Length +/- (cm) 120.0 / 120.0Owner Mikael JohanssonItem Number

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 6 / 19

3D ViewSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 7 / 19

Parts ListSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Item No. Article Unit

Numberofunits

Amount PerPack

03-000012 Grounding connector set AF 18 Set 3 1 * 1003-000254 Roof hook set ZD 30 M12 Set 36 1 * 5003-000275 Middle clamp set 34-42 C Set 30 1 * 10003-000277 End clamp set 34-42 C Set 12 1 * 2003-000281 Roof hook mounting screw 8x100 Stck 36 1 * 5003-000282 Roof hook mounting screw 8x140 Stck 36 1 * 5003-000292 C-rail 47-2 4.20 m Stck 9 1 * 7003-000925 Rail connector set C47 S Stck 6 1 * 50

Weight of the mounting system (without packaging): 62 kg 292 kg

Optional:

Item No. Article Unit

Numberofunits

Amount PerPack

03-000011 Special lock nut AF 18 deep Stck 1 103-000099 Cable clip d 10mm Stck 18 1 * 10003-000100 Hexagonal clamping socket bit, AF8 Stck 1 103-000134 Top cover C-rail 2.000 mm Stck 1 1 * 5003-000259 Slip Guard/ End Cap Set C47 Set 12 1 * 5003-000508 Kabelbinder-Clip an Profilsteg 1-3mm Stck 18 1 * 100

ErrorThe slip protection for the modules has to be provided on site since no parts were found suitable for a mounting hole of 5mm.

Notes on quantity calculationThe prices in the part list (whether in packaging units or in actually required quantities) exclude any discount and tax. This is also applies to thecost per kW of the system.The components in the part list were determined based on the data entered. If conditions on site differ from this then the structural calculationsand parts list must be recalculated. The installer must check the design before ordering.

The parts list is based on these assumptions:- The structural calculations of the mounting structure (fasteners, rails etc.) is based on the design data entered, the results are only valid for thecomponents in the parts list.- The array corresponds to the given design- A) equal spacing of the roof members (rafter, purlin) for the fixing points (roof hook, stock bolt)- B) Equal spacing of the roof covering (trapezoidal peaks, seam spacing) for the fixing points (C-rail direct mounting set, seam clamp)- The calculations depend on the chosen panel (both size and frame colour), and the result is only valid for that panel

All the components listed in the parts list are needed for the installation. The optional part list includes the tools for the installation of themounting structure as well as other useful components which are not essential, but which protect the cables and are aesthetically pleasing.

General NotesThe static calculation of the mounting system is based on the specification given in Eurocode 1. Further more, wind tunnel tests and the differentnational regulations for the choice of countries in the software is taken into account. Switzerland is an exception - there the load determinationcorresponds to the standards of SIA 261 (2003).Special local cases in regards to Eurocode 1, e. g. snow accumulation, overhanging snow on the eaves, snow drop and loads due to ice orexposed building locations are not taken into account automatically by the software but have to be checked separately.

The mounting structure must be installed in accordance with the manual. It contains all the required information, e.g. required torque settingsand installation of expanding joints.

The mounting structure including the structural calculations are certificated by TÜV Rheinland.

The structural calculations refer only to the Novotegra mounting system and not to the structure of the building. The building must be assessedby a structural engineer.

Please note that the panels must to be installed according to the manufacturer’s manual. You must adhere to the relevant local safetyregulations and building standards.

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 8 / 19

Roof SketchSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 9 / 19

KeySolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Roof

Obstacles: Chimney, skylight or dormer.

Modules.

Beams: Rafter or purlin.

Dependend on selected covering: Corrugations or seams.

Mounting system components

Roof fastening: Roof hook/stock screw and double roof hook.

Module support and base foot

End and mid clamps

Rail connector, expansion joint and cross rail connector.

Vertical and horizontal rail, tie / wind deflector

57 Underlined ballast values indicate that a ballast trough isrequired

Advice/Warnings

Color code which highlights a corrected error.

Color code which highlights a warning in the design.

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 10 / 19

Installation Plan Roof 1Solcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 11 / 19

Rail Cut Plan (1/1)Solcellspaket - Poly & Mono (Novotegra - Tegel - 1...

C-rail 47-2 4.20 m

6 x4.20 m

3 x1.90 m 1.90 m 0.40 m

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 12 / 19

Rail Lengths Plan Module Rail (m) Roof 1Solcellspaket - Poly & Mono (Novotegra - Tegel - 1...

4.20

4.20

1.90

4.20

1.90

4.20

1.90

4.20

1.90

4.20

1.90

4.20

1.90

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 13 / 19

Roof AreasSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 14 / 19

Roof AreasSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Roof AreaSuction(CPE10) Suction (CPE1)

Pressure(CPE10)

Pressure(CPE1)

1 Ridge -0.60 -1.00 0.40 0.402 Corner -0.90 -1.20 0.70 0.703 Gable -1.10 -1.60 0.40 0.404 Middle -0.60 -1.00 0.40 0.405 Eaves -0.60 -1.20 0.70 0.70

The wind direction is assumed to be from the gable end for the purpose of these calculations.

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 15 / 19

Load: Flush 1 layered PortraitSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

Characteristic loads, that is, the snow load shape coefficientLoad Substructure gUK = 0.02 kN/m²Module Load gM = 0.11 kN/m²Peak velocity pressure qp(Z) = 0.45 kN/m²Ground Snow Load sk = 2.00 kN/m²Snow load shape coefficient µ1 = 0.80Snow load perpendicular to the module sM = 1.20 kN/m²

Scheduled loads for the roof areasComponent Group: Module fastening

Roof AreaCpe

(Suction)Cpe(Pressure)

Windsuction[kN/m²]

Windpressure[kN/m²]

Snowload[kN/m²]

Load[kN/m²]

Corner -1.20 0.70 -0.54 0.31 1.60 0.13Eaves -1.20 0.70 -0.54 0.31 1.60 0.13Gable -1.60 0.40 -0.72 0.18 1.60 0.13Middle -1.00 0.40 -0.45 0.18 1.60 0.13Ridge -1.00 0.40 -0.45 0.18 1.60 0.13

Scheduled loads for the roof areasComponent Group: Upper Rail

Roof AreaCpe

(Suction)Cpe(Pressure)

Windsuction[kN/m²]

Windpressure[kN/m²]

Snowload[kN/m²]

Load[kN/m²]

Corner -1.15 0.70 -0.52 0.31 1.60 0.13Eaves -1.10 0.70 -0.49 0.31 1.60 0.13Gable -1.51 0.40 -0.68 0.18 1.60 0.13Middle -0.93 0.40 -0.42 0.18 1.60 0.13Ridge -0.93 0.40 -0.42 0.18 1.60 0.13

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 16 / 19

Statics: Flush 1 layered PortraitSolcellspaket - Poly & Mono (Novotegra - Tegel - 1...

ComponentsItem Number Name03-000254 Dachhaken-Set ZD 30 M1203-000292 C-Schiene 47-2 4,20m03-000275 Mittelklemme 34-42 Set C03-000281 Befestigungsschraube Dachhaken 8x100

Results

Roof AreaComponent

Group ComponentsBearing-distance

Rail-distance Load [%] Occupancy

Corner Modulefastening

03-000275 0.99 m 0.82 m 46 %

Corner Upper Rail 03-00025403-00029203-000281

1.20 m 0.82 m 98 % every rafter

Eaves Modulefastening

03-000275 0.99 m 0.82 m 46 %

Eaves Upper Rail 03-00025403-00029203-000281

1.20 m 0.82 m 98 % every rafter

Gable Modulefastening

03-000275 0.99 m 0.82 m 46 %

Gable Upper Rail 03-00025403-00029203-000281

1.20 m 0.82 m 98 % every rafter

Middle Modulefastening

03-000275 0.99 m 0.82 m 46 %

Middle Upper Rail 03-00025403-00029203-000281

1.20 m 0.82 m 96 % every rafter

Ridge Modulefastening

03-000275 0.99 m 0.82 m 46 %

Ridge Upper Rail 03-00025403-00029203-000281

1.20 m 0.82 m 96 % every rafter

Permitted rail cantilever from the last fastener

Roof AreaComponent

Group Components Cantilever [m] Load [%]Corner Upper Rail 03-000254

03-0002920.60 m 98 %

Eaves Upper Rail 03-00025403-000292

0.60 m 98 %

Gable Upper Rail 03-00025403-000292

0.60 m 98 %

Middle Upper Rail 03-00025403-000292

0.60 m 96 %

Ridge Upper Rail 03-00025403-000292

0.60 m 96 %

Permitted roof hook overhang at rafter edgeRoof Area Area Components Cantilever [m] Load [%]Corner Middle area 03-000254 0.04 m 96 %Eaves Middle area 03-000254 0.04 m 96 %Gable Middle area 03-000254 0.04 m 91 %Middle Middle area 03-000254 0.04 m 91 %Ridge Middle area 03-000254 0.04 m 91 %

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 17 / 19

Posted on 2018-02-22 with Solar-Planit 4.02.03 by Mikael Johansson. Errors and changes excepted. Copyright BayWa r.e. Solar Energy Systems GmbH 2012-2018. 18 / 19

Array 1Solcellspaket - Poly & Mono (Novotegra - Tegel - 1...

BayWa r.e. Solar Energy Systems GmbHEisenbahnstraße 150D-72072 TübingenTelephone +49 7071 98987-0solarenergysystems@baywa-re.comwww.baywa-re.com