solaris preinstalled first_config

4
8/20/2019 Solaris Preinstalled First_config http://slidepdf.com/reader/full/solaris-preinstalled-firstconfig 1/4 Power On the Server for the First Time At the terminal device, log in to the SP as root with a password of changeme. Change the root password. -> set /SP/users/root password Power on the server and redirect the host output to display on the serial terminal device: -> start /SYS Are you sure you want to start /SYS (y/n)? y -> start /HOST/console Are you sure you want to start /HOST/CONSOLE (y/n)? y Serial console started To sto!" ty!e # Assign a Static IP Address to the SP If the network our server is connected to does not support !"CP for IP addressing, perform the following procedure to update the #S configuration to static IP addressing and to assign a static IP address to the SP. $. Set the SP to accept a Static IP Address. %. -> set /SP/network pendingipdiscover&static Set 'pendingipdiscover' to 'static' (. Set the IP address for the SP. ). -> set /SP/network pendingipaddress&service-processor-IPaddr Set 'pendingipaddress' to 'service-processor-IPaddr' *. Set the IP address for the SP gatewa. +. -> set /SP/network pendingipgatewa&gatewa-IPaddr Set 'pendingipgatewa' to 'gatewa-IPaddr' . Set the netmask for the SP. . -> set /SP/network pendingipnetmask &%**.%**.%**. Set 'pendingipnetmask' to '%**.%**.%**.'

Upload: ermal-cene

Post on 07-Aug-2018

212 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Solaris Preinstalled First_config

8/20/2019 Solaris Preinstalled First_config

http://slidepdf.com/reader/full/solaris-preinstalled-firstconfig 1/4

Power On the Server for the First Time

At the terminal device, log in to the SP as root with a password of changeme.

Change the root password.

-> set /SP/users/root password

Power on the server and redirect the host output to display on the serial terminal device:

-> start /SYSAre you sure you want to start /SYS (y/n)? y-> start /HOST/consoleAre you sure you want to start /HOST/CONSOLE (y/n)? y

Serial console started To sto!" ty!e #

Assign a Static IP Address to the SP

If the network our server is connected to does not support !"CP for IP addressing, perform thefollowing procedure to update the #S configuration to static IP addressing and to assign a static

IP address to the SP.

$. Set the SP to accept a Static IP Address.

%. -> set /SP/network pendingipdiscover&static

Set 'pendingipdiscover' to 'static'

(. Set the IP address for the SP.

). -> set /SP/network pendingipaddress&service-processor-IPaddr

Set 'pendingipaddress' to 'service-processor-IPaddr'

*. Set the IP address for the SP gatewa.

+. -> set /SP/network pendingipgatewa&gatewa-IPaddr

Set 'pendingipgatewa' to 'gatewa-IPaddr'

. Set the netmask for the SP.

. -> set /SP/network pendingipnetmask &%**.%**.%**.

Set 'pendingipnetmask' to '%**.%**.%**.'

Page 2: Solaris Preinstalled First_config

8/20/2019 Solaris Preinstalled First_config

http://slidepdf.com/reader/full/solaris-preinstalled-firstconfig 2/4

his e0ample uses %**.%**.%**. to set the netmask. 1our network environment su2net might

re3uire a different netmask. 4se a netmask num2er most appropriate to our environment.

5. 4se the show /SP/network command to verif that the parameters were set correctl.

$. -> show /SP/network

$$. /SP/network

$%. argets6

$(. interconnect

$). ipv+

$*. test

$+.

$. Properties6

$. commitpending & 7Cannot show propert8

$5. dhcp9server9ip & none

%. ipaddress & xxx.xxx.xxx.xxx

%$. ipdiscover & static

%%. ipgatewa & xxx.xxx.xxx.xxx

%(. ipnetmask & %**.%**.%*%.

%). macaddress & xx6 xx6 xx6 xx6 xx6 xx 

%*. pendingipaddress & xxx.xxx.xxx.xxx

%+. pendingipdiscover & static

%. pendingipgatewa & xxx.xxx.xxx.xxx

%. pendingipnetmask & %**.%**.%**.

%5. side2andmacaddress & xx6 xx6 xx6 xx6 xx6 xx

(. state & ena2led

Page 3: Solaris Preinstalled First_config

8/20/2019 Solaris Preinstalled First_config

http://slidepdf.com/reader/full/solaris-preinstalled-firstconfig 3/4

Page 4: Solaris Preinstalled First_config

8/20/2019 Solaris Preinstalled First_config

http://slidepdf.com/reader/full/solaris-preinstalled-firstconfig 4/4

for additional name service configuration information.

 =;Sv) !omain

 =ame

Select the tpe of domain name configuration according to our

environment. If ou are not sure, select $se t%e N&S' doain deri'ed

*y t%e syste.ime Done

7Continent8

Select our continent.

ime Done 7Countror Eegion8

Select our countr or region.

ime Done Select the time Fone.

!ate and ime Accept the default date and time, or change the values.root Password pe the root password twice. his password is for the superuser account

for the #racle Solaris #S on this server. his password is not the SP

 password.