solder & soldering supplies line card...solder & soldering supplies line card solder bar...
TRANSCRIPT
American Lead and Solder Supply Co.
Div. of Len Gutman Sales
7056 Archibald St #102-434 - Eastvale, CA 92880
Phone 951-356-4180 Toll-Free 888-462-8258 Fax 951-356-4179
Website: www.alassco.com www.lgsalesonline.com Email: [email protected]
Solder & Soldering Supplies Line Card
Solder
Bar Solders available in;
30/70, 40/60, 50/50, 60/40, 63/37
Extruded Meter Bar 1/3 lb
Extruded Capping Bar 1/4 lb
Extruded 1/2 lb. Bar
Extruded 1 lb. Bar
Casted Bar 1 lb. (Available on request)
Tri-Bar 1/4”, 3/8” & 5/16” (50/50 Solder Only)
Packed 50 lbs per box
Tin/Lead Wire Solder available in;
40/60, 50/50, 60/40,
.125 1/8” Wire
1/2 lb, 1 lb, 5 lb, & 25 lb spools.
Acid and Rosin Core also available.
Custom blends of Tin/Lead Solders are available on request a 300 lb.
minimum applies.
Meets Federal Specification QQS-571E for tin/lead solders. ISO 9001:2008
certified quality.
Lead-Free Solder available in;
97/3 "No Lead Super 50" (tin/copper) Sn/Cu 1# spool .125 dia.
Lead Free Plus (tin/copper/silver) Sn/Cu/Ag 1# spool .125 dia.
95/5 (tin/antimony) Sn/Sb 1# spool .125 dia.
Pure Tin Bar Solder
NSF/ANSI Standard 61 plumbing solders. Meets ASTM B32 and Safe
Water Drinking Act requirement
All of our Solder’s are made in the U.S.A.
Forged S Soldering Coppers
Genuine drop forged coppers hold their
heat longer than imitations.
1 Lb/Pair, Pointed 300-01
2 Lb/Pair, Pointed 300-02
3 Lb/Pair, Pointed 300-03
4 Lb./Pair, Pointed 300-04
5 Lb./Pair, Pointed 300-05
6 Lb/Pair, Pointed 300-06
2 Lb./Pair, Chisel 301-02
3 Lb./Pair, Chisel 301-03
4 Lb./pair, Chisel 301-04
4 Lb./Pair, Hatchet 302-04
6 Lb/Pair, Hatchet 302-06
Wood Handle for 1 Lb,
Pairs 303-02S
Wood Handle for 2, 3, 4
Lb, Pairs 303-03M
Wood Handle for 5, 6, 8
Lb, Pairs 303-04L
Aero Duplex Acetylene Soldering
3/4 lb. Copper Tip 1–1/4 lb. Copper Tip
Soldering Furnace
JOHNSON BENCH FURNACE
Double burners and a refractory lining enable unit to
heat several coppers at one time, fast! This bench
mounted furnace is made of cast iron and is built to
last. Specify Nat. or LP gas.
#101 Bench Furnace, Nat Gas 101-NG
#101 Bench Furnace, LP Gas 101-LP
Soldering Flux, Fluid, and Paste
Ruby Fluid Liquid; 2oz, Pint, Quart, Gallon
Ruby Paste Flux; 2, 8, & 16 oz Jar
Ruby Fluid Stainless Steel: Pint, Quart,
Gallon Bottles
Stay-Clean; 4oz, Pint, Quart, Gallon Bottles
Stay-Clean Paste Flux 4 oz & 1 lb
Johnson Original Soldering Fluid; Pint,
Quart, Gallon Bottles
J-33 for Galvanized; Quart & Gallon Bottles
Johnson’s No.1 Stainless Steel Flux; Quart
& Gallon Bottles
Lloyds Stainless Steel Flux; Quart & Gallon
Bottles
Lloyds No. 6 Soldering Fluid Ideal flux for
soldering brass, copper, steel, lead,
tinplate, terne plate and other coated
metals.
Johnson J-35 for Nickel: Quart & Gallon
Bottles
Johnson Soldering Paste; 3 oz & 1 lb. Jars
Johnson Water Removable Paste; 3 oz & 1
lb. Jars
E-Z Pot Pro Portable Furnace
Design Performance (Insulated, Wind-
resistant, and Fast Start-Up)
Weight (5lb)
Setup Quick Adjust to any pitch from
0 to 12/12 pitch 45 degrees
in about 5 seconds
Size (almost fits in a Shoe Box)
*Subject to Manufacturers availability
ALLEN'S SAL AMMONIAC BLOCKS
Pure, solid, long-lasting Sal Ammoniac Blocks are ideal
for fast cleaning and tinning of soldering coppers.
Case of 24 - 1/2 lb. 24-100-08
Case of 12 - 1 lb. 24-100-10
HORSEHAIR ACID SWABS
#1 Acid Brushes 3/8"
#2 Acid Brushes 1/2"
#3 Acid Brushes 9/16"
Freund Express Soldering Irons