solenoidvalve2/2wayn.c. 21ht3k0 y110 … - 21ht6k… · iso228/1 a mm b mm c mm 21hf5k0 v200 g3/4...
TRANSCRIPT
21HT3K0Y110÷
21HT6K0Y250-S
-S
G 3/8 21HT3K0Y110
12 ~ 2
11 208
0
14
512
1414
G 1/2 21HT4K0Y160
16 40
8 2,512 1114 14
G 3/4 21HT5K0Y1608 1,512 1114 14
G 1
21HT6K0Y250
25
1208 8 -12
141,5
14 6
*21HT6K0Y250-S 908
-1
12 614 12
PRESENTATION:PRESENTATION:Combined operation S.V. for interception of fluids compatibleswith the construction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Combined operation
COILS:COILS:
09-09-2010 ODE 21HT3K0Y110 ÷ 21HT6K0Y250-S
Gaskets Temperature MediumY=NBR (nitrile rubber) + PA(polyamide) - 10°C + 90°C Air, gasoline, fuel oils,
inert gas, waterV=FKM+ PA(fluorelastomer+poliamiyde) - 10°C +140°C Mineral oils (2°E), gasoline
gas oil
For seals other than FKM replace the letter “V” with the onescorresponding to the other seals. E.I. 21HT3K0V110.
Automation, Vacuum packagingHeating
G 3/8 - G 1
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 16 barAmbient temperature:with coils class F - 10°C + 60°Cwith coils class H - 10°C + 80°C
Note* For DC only
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
21HT3K0Y110 G 3/850
89 5621HT4K0Y160 G 1/2
100 7021HT5K0Y160 G 3/421HT6K0Y250
G 1 65 112 10421HT6K0Y250-S
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67
21HT3K0Y110 ÷ 21HT6K0Y250-S ODE 09-09-2010
1. Coil:See coils list
2. Complete armature tubewithout gasket:G 3/8÷G 3/4 Code R450691G 1 Code R450603
3. Gasket O-Ring:Code R990000/B
4. Complete diaphragmwith plunger:G3/8 Code R452126/BG1/2÷G 3/4 Code R452125/BG1 Code R452555/B
5.Gasekt O-Ring :G3/8÷G 3/4 Code R990105/B
G 3/8KTGHT3K0Y11=4+5G 1/2÷G 3/4KTGHT4K0Y16=4+5G 1KTGHT6K0Y25=4
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
MANITENANCE KIT:MANITENANCE KIT:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: Y=NBR+PA
On request : V=FKM+PAOrifice Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
Type PipeISO 228/1
Amm
Bmm
Cmm
DIMENSIONS:DIMENSIONS:
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
1/4 NPT 21HN2K0Y110-HT
12 ~ 2
11 20
8
0
14
512
1414
3/8 NPT 21HN3K0Y110-HT8 512
1414
1/2 NPT 21HN4K0Y160-HT
16 40
8 2,512 1114 14
3/4 NPT 21HN5K0Y160-HT8 1,512 1114 14
1 NPT 21HN6K0Y250-HT 25 1208 8 -12
141,5
14 6
21HN2K0Y110-HT÷
21HN6K0Y250-HT
PRESENTATION:PRESENTATION:Combined operation S.V. for interception of fluids compatibleswith the construction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Combined operation
COILS:COILS:
Gaskets Temperature MediumY=NBR (nitrile rubber) + PA(polyamide) - 10°C + 90°C Air, gasolin, fuel oils,
inert gas, waterV=FKM+ PA(fluorelastomer+poliamiyde) - 10°C +140°C Mineral oils (2°E), gasoline
gas oil
09-09-2010 ODE 21HN2K0Y110-HT ÷ 21HN6K0Y250-HT
Automation, Vacuum packagingHeating
1/4 NPT - 1 NPT
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 16 barAmbient temperature:with coils class F - 10°C + 60°Cwith coils class H - 10°C + 80°C
For seals other than FKM replace the letter “V” with the onescorresponding to the other seals. E.I. 21HN2K0V110-HT.
PipeANSI/ASME
BI.20.1Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
21HN2K0Y110-HT 1/4 NPT
5089 56
21HN3K0Y110-HT 3/8 NPT21HN4K0Y160-HT 1/2 NPT
100 7021HN5K0Y160-HT 3/4 NPT21HN6K0Y250-HT 1 NPT 65 112 104
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67
21HN2K0Y110-HT ÷ 21HN6K0Y250-HT ODE 09-09-2010
1. Coil:See coils list
2. Complete armature tubewithout gasket:1/4÷3/4 NPT Code R4506911 NPT Code R450603
3. Gasket O-Ring:Code R990000/B
4. Complete diaphragmwith plunger1/4÷3/8 NPT Code R452126/B1/2÷3/4 NPT Code R452125/B1 NPT Code R452555/B
5. Gasekt O-Ring1/4÷3/4 NPT Code R990105/B
1/4÷ 3/8 NPTKTGHT3K0Y11=4+51/2÷ 3/4 NPTKTGHT4K0Y16=4+51 NPTKTGHT6K0Y25=4
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: Y=NBR+PA
On request : V=FKM+PAOrifice Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
MAINTENANCE KIT:MAINTENANCE KIT:
Type Pipe Amm
Bmm
Cmm
DIMENSIONS:DIMENSIONS:
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
21HT3Z0Y110÷
21HT5Z0Y160
G 3/8 21HT3Z0Y110
12 ~ 2
11 20
8 0 10 * 10G 1/2 21HT4Z0Y16016 40
G 3/4 21HT5Z0Y160
PRESENTATION:PRESENTATION:Combined operation S.V. for interception of fluids compatibleswith the construction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
PIPES:PIPES:
Solenoid valve 2/2 way N.O.Combined operation
COIL:COIL:
Gaskets Temperature MediumY=NBR (nitrile rubber) + PA(polyamide) - 10°C + 90°C Air, gasolin, fuel oils,
inert gas, waterV=FKM (fluoroelastomer)+PA (polyamide) - 10°C +140°C Mineral oils (2°E), gasoline
gas oil
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
Automation, Vacuum packagingHeating
G 3/8 - G 3/4
8W - Ø 13BDA - BDS 155°C (class F)BDF - BDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 16 barAmbient temperature:with coil class F - 10°C + 60°Cwith coil class H - 10°C + 80°C
For seals other than NBR+PA replace the letter “Y” with the onescorresponding to the other seals. E.I. 21HT3Z0V110.
Note* To use in AC, a rectifier bridge will be supplied with the DC coil
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
29-06-2011 ODE 21HT3Z0Y110 ÷ 21HT5Z0Y160
21HT3Z0Y110 G 3/850
101 5621HT4Z0Y160 G 1/2
112 7021HT5Z0Y160 G 3/4
B 8 14,5 25 30 42 54 76
21HT3Z0Y110 ÷ 21HT5Z0Y160 ODE 29-06-2011
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: Y=NBR+PA
On request: V=FKM+PAOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
1. Coil:See coils list
2. Complete armature tubewithout gasket:Code R452908
3. Gasket O-Ring:Code R990000/B
4. Complete nut withgasket O-Ring:Code R452863/B
5. Complete diaphragmwith spring :G3/8 CodeR452879/BG1/2÷G3/4CodeR452862/B
6. Gasekt O-Ring :Code R990105/G
MAINTENANCE KIT:MAINTENANCE KIT:G 3/8KTGHT3Z0Y11=5+6G 1/2÷ G 3/4KTGHT4Z0Y16=5+6
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
Gmm
Type PipeISO 228/1
Amm
Bmm
Cmm
21HN2Z0Y110-HT÷
21HN5Z0Y160-HT
1/4 NPT 21HN2Z0Y110-HT
12 ~ 2
11 20
8 0 10 * 103/8 NPT 21HN3Z0Y110-HT
1/2 NPT 21HN4Z0Y160-HT16 40
3/4 NPT 21HN5Z0Y160-HT
PRESENTATION:PRESENTATION:
USE:USE:
COILS:COILS:
PIPES:PIPES:
Combined operation S.V. for interception of fluids compatibleswith the construction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Automation, Vacuum packagingHeating
1/4 NPT - 3/4 NPT
8W - Ø 13BDA - BDS 155°C (class F)BDF - BDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 16 barEnvironment temperature:with coil class F - 10°C + 60°Cwith coil class H - 10°C + 80°C
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Solenoid valve 2/2 way N.O.Combined operation
Gaskets Temperature MediumY=NBR (nitrile rubber) + PA(polyamide) - 10°C + 90°C Air, gasolin, fuel oils,
inert gas, waterV=FKM (fluoroelastomer) +PA (polyamide) - 10°C +140°C Mineral oils (2°E), gasoline
gas oil
For seals other than NBR+PA replace the letter “Y” with the onescorresponding to the other seals. E.I. 21HN3Z0V110-HT.
Note* To use in AC, a rectifier bridge will be supplied with the DC coil
29-06-2011 ODE 21HN2Z0Y110-HT ÷ 21HN5Z0Y160-HT
21HN2Z0Y110-HT 1/4 NPT
50101 56
21HN3Z0Y110-HT 3/8 NPT21HN4Z0Y160-HT 1/2 NPT
112 7021HN5Z0Y160-HT 3/4 NPT
B 8 14,5 25 30 42 54 76
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: Y=NBR+PA
On request: V=FKM+PAOrifice Brass - UNI EN 12165 CW617N
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
CARATTERISTICHE:CARATTERISTICHE:
1. Coil:See coils list
2. Complete armature tubewithout gasket:Code R452908
3. Gasket O-Ring:Code R990000/B
4. Complete nut withgasket O-Ring:Code R452863/B
5. Complete diaphragmwith spring :1/4÷3/8NPT Cod. R452879/B1/2÷3/4NPT Cod. R452862/B
6. Gasekt O-Ring :Code R990105/B
MAINTENANCE KIT:MAINTENANCE KIT:1/4 ÷ 3/8 NPTKTGHT3Z0Y11=5+61/2 ÷ 3/4 NPTKTGHT4Z0Y16=5+6
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
Gmm
Type Pipe Amm
Bmm
Cmm
21HN2Z0Y110-HT ÷ 21HN5Z0Y160-HT ODE 29-06-2011
21HF5K0V200
Combined operation S.V. for interception of fluids compatiblewith the construction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Automation - Heating
G 3/4
8W -Ø 13BDA -BDS - BSA 155°C (class F)BDP 160°C (high temperature)BDF- BDV 180°C (class H)12W -Ø 13UDA 155°C (class F)14W - Ø 13GDH -GDV 180°C (class H)
Solenoid valve 2/2 way N.C.Combined operation
PRESENTATION:PRESENTATION:
USE:USE:
PIPE:PIPE:
COILS:COILS:
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 16 barAmbient temperature:with coil class F and high temperature - 10°C + 60°Cwith coil class H - 10°C + 80°C
08-02-2010 (Internal technical data sheet) ODE 21HF5K0V200
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
For seals other than FKM replace the letter “V” with the onescorresponding to the other seals. E.I. 21HF5K0B200.
NoteAvailable on request and with minimum quantities.
Gaskets Temperature Medium
B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water
E=EPDM(ethylene-propylene) - 10°C + 140°C Water, steam
V=FKM (fluoroelastomer) - 10°C +140°C Mineral oils (2°E), gasolinegas oil
PipeISO 228/1 Code Max viscosity Ø
mm
Kv Power Pressuremin M.O.P.D.
cSt °E l/mn (watt) bar AC bar DC bar
G 3/4 21HF5K0V200 12 ~ 2 20 1208
0 166
1216
14
Special item-not standard
1. Coil:See coils list
2. Complete armature tube:Code R450603
3. Gasket O-Ring:Code R990000/V
4. Gasket O-Ring:Code R990153/V
5. Complete diaphragmwith plunger:Code R452269/V
6. Gasket O-Ring:Code R990002/V
MAINTNANCE KIT:MAINTNANCE KIT:KTGHF5K0V20= 4+5+6
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request:E=EPDM B=NBROrificie Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 o Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
MATERIALS:MATERIALS:
21HF5K0V200 (Internal technical data sheet) ODE 08-02-2010
DIMENSIONS:DIMENSIONS:
Type PipeISO 228/1
Amm
Bmm
Cmm
21HF5K0V200 G 3/4 65 103 104
COIL POWER ABSORPTIONTYPE
DIMENSIONS
W InrushVA ~
HoldVA ~
Dmm
Emm
Fmm
8 W 25 14,5 B 30 42 5412 W 35 25 U 36 48 6014 W 43 27 G 52 55 67
21HF6K0V250÷
21HF8K0V400
G 1 21HF6K0V250
12 ~ 2
25 1408
0 16
512
1614
G 1 1/4 21HF7K0V350 35 2708 -12 -14 6
G 1 1/2 21HF8K0V400 40 2808 -12 -14 6
PRESENTATION:PRESENTATION:Combined operation S.V. for interception of fluids compatiblewith the construction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
PIPE:PIPE:
Solenoid valve 2/2 way N.C.Combined operation
09-09-2010 ODE 21HF6K0V250÷21HF8K0V400
For seals other than FKM replace the letter “V” with the onescorresponding to the other seals. E.I. 21HF6K0B250.
Gaskets Temperature Medium
B=NBR (nitrile rubber) - 10°C + 90°C Air, inert gas, water
E=EPDM(ethylene-propylene) - 10°C + 140°C Water, steam
V=FKM (fluoroelastomer) - 10°C +140°C Mineral oils (2°E), gasolinegas oil
AutomationHeating
G 1 - G 1 1/2
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
IMOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 16 barAmbient temperature:with coils class F - 10°C + 60°Cwith coils class H - 10°C + 80°C
CE Approval(Pressure Equipment Directive 97/23/CE)
for S.V. 21HF7÷21HF8
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
21HF6K0V250 G 1 65 110 10421HF7K0V350 G 1 1/4
94 130 12821HF8K0V400 G 1 1/2
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67
21HF6K0V250÷21HF8K0V400 ODE 09-09-2010
1. Coil:See coils list
2. Complete armature tube:Code R450603
3. Gasket O-Ring:Code R990000/V
4. Gasket O-Ring:G1 Code R990153/VG11/4÷G11/2CodeR992061/V
5. Complete diaphragmwith plunger:G 1 Code R452269/VG11/4÷G11/2CodeR452395/V
6. Gasket O-Ring:G 1 Code R990002/V
G 1KTGHF5K0V20= 4+5+6G 1 1/4÷G 1 1/2KTGHF7K0V35=4+5
Body Brass - UNI EN 12165 CW617NArmature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal Standard: V=FKM
On request:E=EPDM B=NBROrificie Brass - UNI EN 12165 CW617NOn request:Connector Pg 9 o Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
DIMENSIONS:DIMENSIONS:
MAINTENANCE KIT:MAINTENANCE KIT:
Type PipeISO 228/1
Amm
Bmm
Cmm
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm