solenoidvalve2/2wayn.c. 21l1k1 v25 directacting v · pdf fileiso228/1 code maxviscosity
TRANSCRIPT
21L1K1V25÷
21L1K1V40
G 1/8
21L1K1V25
53 ~ 7
2,5 3,28
0
14 912
30 2514
21L1K1V30 3 48 10 612
2518
14 20
21L1K1V40 4 58 6 1,712
156
14 8
PRESENTATION:PRESENTATION:Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration
USE:USE:
COILS:COILS:
09-09-2010 ODE 21L1K1V25 ÷ 21L1K1V40
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Direct acting
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10°C +140°CDemineralized water, syrups,chemical products compatible
with stainless steel
ChemistryDrinks
G 1/8
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F - 10°C + 60°Cwith coils class H - 10°C + 80°C
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67
21L1K1V25 ÷ 21L1K1V40 ODE 09-09-2010
1. Coil:See coils list
2. Complete plunger:For orifice < 3 mmCode R450886/VFor orifice > 3 mmCode R450898/V
3. Complete armature tube:Code R450811
4. Gasket O-Ring:Code R990000/V
Orifice < 3 mmKT130KV30-H=2+3+4Orifice > 3 mmKT130KV55-H=2+3+4
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
KIT:KIT:
Body Stainless steel AISI 316Armature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Gold plated copperSpring Stainless steel AISI series 300Seal V=FKMOrifice Stainless steel AISI 316
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
21L1K1T25÷
21L1K1T40
G 1/8
21L1K1T25
53 ~ 7
2,5 3,28
0
14 912
30 2514
21L1K1T30 3 48 10 612
2517
14 20
21L1K1T40 4 58 6 1,712
156
14 8
PRESENTATION:PRESENTATION:Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USEUSE
COILS:COILS:
09-09-2010 ODE 21L1K1T25 ÷ 21L1K1T40
PIPES:PIPES:
Solenoid valve 2/2 way N.C.Direct acting
Gaskets Temperature Medium
T=PTFE(polytetrafluorethylen) - 40°C + 180°C
Demineralized water,steam, syrups,
chemical products compatiblewith stainless steel
ChemistryDrinks
G 1/8
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F - 40°C + 60°Cwith coils class H - 40°C + 80°C
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67
21L1K1T25 ÷ 21L1K1T40 ODE 09-09-2010
1. Coil:See coils list
2. Complete plunger:For orifice < 3 mmCode R450886/TFor orifice > 3 mmCode R451234/T
3. Complete armature tubewithout gasket:Code R450811
4. Gasket O-Ring:Code R990000/T
Orifice < 3 mmKT130KT30-H=2+3+4Orifice > 3 mmKT130KT55-H=2+3+4
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
KIT:KIT:
Body Stainless steel AISI 316Armature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Gold plated copperSpring Stainless steel AISI series 300Seal T=PTFEOrifice Stainless steel AISI 316
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURESFEATURES
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
21L1ZV25D÷
21L1ZV30D
G 1/821L1ZV25D
53 ~ 72,5 3,2
8 014 14
21L1ZV30D 3 4 10 10
ChemistryDrinks
G 1/8
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coil class F - 10°C + 60°Cwith coil class H - 10°C + 80°C
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10°C + 140°C Chemical products compatiblewith stainless steel
PRESENTATION:PRESENTATION:Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
USE:USE:
COILS:COILS:
PIPES:PIPES:
Solenoid valve 2/2 way N.O.Direct acting
09-09-2010 ODE 21L1ZV25D ÷ 21L1ZV30D
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
B 8 14,5 25 30 42 54
21L1ZV25D ÷ 21L1ZV30D ODE 09-09-2010
1. Coil:See coils list
2. Diaphragm support:Code R450788/V
3. Complete armature tube:CodeR450573
4. Gasket O-Ring:Code R990000/V
KT130ZV30-F=2+3+4
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
KIT:KIT:
Body Stainless steel AISI 316Armature tube Stainless steel AISI series 400Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal V=FKMOrifice Stainless steel AISI 316
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 33Protection IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
21L2K1V25÷
21L2K1V55
G 1/4
21L2K1V25
53 ~ 7
2,5 3,28
0
14 912
30 2514
21L2K1V30 3 48 10 612
2518
14 20
21L2K1V40 4 58 6 1,712
156
14 8
21L2K1V55 5,5 98 3,5 112 7 2,514 10 5
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
09-09-2010 ODE 21L2K1V25 ÷ 21L2K1V55
PRESENTATION:PRESENTATION:
USE:USE:
COILS:COILS:
PIPES:PIPES:
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Solenoid valve 2/2 way N.C.Direct acting
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10°C + 140°CDemineralized water, syrups,chemical products compatible
with stainless steel
ChemistryDrinks
G 1/4
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F - 10°C + 60°Cwith coils class H - 10°C + 80°C
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67
21L2K1V25 ÷ 21L2K1V55 ODE 09-09-2010
1. Coil:See coils list
2. Complete plunger:For orifice < 3 mmCode R450886/VFor orifice > 3 mmCode R450898/V
3. Complete armature tube:Code R450811
4. Gasket O-Ring:Code R990000/V
Oirifice < 3 mmKT130KV30-H=2+3+4Orifice > 3 mmKT130KV55-H=2+3+4
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
KIT:KIT:
Body Stainless steel AISI 316Armature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Gold plated copperSpring Stainless steel AISI series 300Seal V=FKMOrifice Stainless steel AISI 316
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
21L2K1T25÷
21L2K1T55
G 1/4
21L2K1T25
53 ~ 7
2,5 3,28
0
14 912
30 2514
21L2K1T30 3 48 10 612
2517
14 20
21L2K1T40 4 58 6 1,712
156
14 8
21L2K1T55 5,5 98 3,5 112 6 214 7 5
Gaskets Temperature Medium
T=PTFE(polytetrafluorethylen) - 40°C + 180°C
Demineralized water,steam, syrups, chemicalproducts compatible with
stainless steel
PRESENTATION:PRESENTATION:
USE:USE:
COILS:COILS:
PIPES:PIPES:
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Solenoid valve 2/2 way N.C.Direct acting
ChemistryDrinks
G 1/4
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barAmbient temperature:with coils class F - 40°C + 60°Cwith coils class H - 40°C + 80°C
09-09-2010 ODE 21L2K1T25 ÷ 21L2K1T55
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67
21L2K1T25 ÷ 21L2K1T55 ODE 09-09-2010
1. Coil:See coils list
2. Complete plunger:For orifice < 3 mmCode R450886/TFor orifice > 3 mmCode R451234/T
3. Complete armature tubewithout gasket:Code R450811
4. Gasket O-Ring:Code R990000/T
Orifice < 3 mmKT130KT30-H=2+3+4Orifice > 3 mmKT130KT55-H=2+3+4
MATERIALS:MATERIALS:
SPARE PARTS:SPARE PARTS:
DIMENSIONS:DIMENSIONS:
KIT:KIT:
Body Stainless steel AISI 316Armature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Gold plated copperSpring Stainless steel AISI series 300Seal T=PTFEOrifice Stainless steel AISI 316
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
FEATURES:FEATURES:
COILTYPE
POWER ABSORPTION DIMENSIONSW Hold
VA ~InrushVA ~
Dmm
Emm
Fmm
21L2ZV55D÷
21L2ZV55G
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
ChemistryDrinks
G 1/4
8W - Ø 13BDA - BDS -BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
Solenoid valve 2/2 way N.O.Direct acting
21-02-2012 (Internal technical data sheet) ODE 21L2ZV55D+21L2ZV55G
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COILS:COILS:
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barEnvironment temperature:with coil class F - 10°C + 60°Cwith coil class H - 10°C + 80°C
NoteAvailable on request and with minimum quantities.
PipeISO 228/1 Code Max viscosity Ø
mm
Kv Power Pressuremin M.O.P.D.
cSt °E l/mn (watt) bar AC bar DC bar
G 1/421L2ZV55D
53 ~ 7 5,5 98
02,5 2,5
21L2ZV55G12
3,5 3,514
Gaskets Temperature Medium
V=FKM(fluoroelastomer) - 10°C + 140°CDemineralized water, syrupschemical product compatible
with stainless steel
Special item-not standard
1. Coil:See coils list
2 . Complete diaphragmsupport:8W Code R450786/V12W - 14W
Code R450786/V143. Complete armature tube
without gasket:Code R450573
4. Gasket O-Ring:Code R990000/V
21L2ZV55D+21L2ZV55G (Internal technical data sheet) ODE 21-02-2012
Body Stainless steel AISI 316Armature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Copper - Cu 99,9%Spring Stainless steel AISI series 300Seal V=FKMOrifice Stainless steel AISI 316
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector
DIMENSIONS:DIMENSIONS:
SPARE PARTS:SPARE PARTS:
FEATURES:FEATURES:
MATERIALS:MATERIALS:
KIT:KIT:8WKT130ZV55-F=2+3+412W - 14WKT130ZV55-G=2+3+4
COILTYPE
POWER ABSORPTION DIMENSIONS
W HoldVA ~
InrushVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67
PRESENTATION:PRESENTATION:
USE:USE:
PIPES:PIPES:
COIL:COIL:
21-02-2012 (Internal technical data sheet) ODE 21L22K1V55-T4
21L22K1V55-T4Solenoid valve 2/2 way N.C.Direct acting - NSF Certified
The “ODE ” reserves the right to carry out technical and aesthetic modifications without prior notification.
Direct acting S.V. for interception of fluids compatible with theconstruction materials.Minimum operational pressure is not required.The materials used and the tests carried out ensure maximumreliability and duration.
Chemistry, DrinksFluid food
G 1/4
8W - Ø 13BDA - BDS - BSA 155°C (class F)BDF - BDV 180°C (class H)12W - Ø 13UDA 155°C (class F)14W - Ø 13GDH - GDV 180°C (class H)
MOULDING AND BOBBIN ARE MADE BY 100% VIRGINMATERIAL.Max. allowable pressure (PS) 40 barEnvironment temperature:with coil class F - 10°C + 60°Cwith coil class H - 10°C + 80°C
Gaskets Temperature Medium
V=FKM (fluoroelastomer) - 10°C + 140°CDemineralized water, syrups,chemical products compatible
with stainless steel
PipeISO 228/1 Code
Max viscosity Ø
mm
Kv PowerPressure
min M.O.P.D.cSt °E l/mn (watt) bar AC bar DC bar
G 1/4 21L22K1V55-T4 53 ~ 7 5,5 98
03,5 1
12 7 2,514 10 5
NSF CERTIFIED
NoteAvailable on request and with minimum quantities.
Special item-not standard
21L22K1V55-T4 (Internal technical data sheet) ODE 21-02-2012
DIMENSIONS:DIMENSIONS:
MATERIALS:MATERIALS:
FEATURES:FEATURES:
SPARE PARTS:SPARE PARTS:1. Coil:See coils list
2. Complete plunger:Code R450898/VX
3. Complete armature tube:Code R450811
4. Gasket O-Ring:Code R990000/VX
Body Stainless steel AISI 316Armature tube Stainless steel AISI series 300Fixed core Stainless steel AISI series 400Plunger Stainless steel AISI series 400Phase displacement ring Gold plated copperSpring Stainless steel AISI series 300Seal V=FKMOrifice Stainless steel AISI 316
On request:Connector Pg 9 or Pg 11Connector conformity ISO 4400
Electrical conformity IEC 335Protection degree IP 65 EN 60529 (DIN 40050)
with coil fitted by connector.
BOBINETYPE
PUISSANCENOMINALE Ecombrements
W MaintienVA ~
AppelVA ~
Dmm
Emm
Fmm
B 8 14,5 25 30 42 54U 12 23 35 36 48 60G 14 27 43 52 55 67