sound insulation values - esttradingesttrading.eu/wp-content/uploads/maxi-scw-studs.pdf ·...
TRANSCRIPT
Studs for improved sound insulation values for lightweight partitions
Sizes according DIN and international standards
International patents pending
MAXI-SCW STUDS FOR IMPROVED
SOUND INSULATION VALUES
CI/SfB JANUARY 2001
(P2)Hh2(22.69)
MAXI-SCW-studs for improved sound insulation values
PROTEKTORWERK . Florenz Maisch GmbH & Co. KG . Profil-Vertrieb . Viktoriastraße 58 . D-76571 GaggenauTel. +49 - 72 25 - 9 77-0 . Fax +49 - 72 25 - 9 77-4 44 . http://www.protektor.com . e-mail: [email protected]
l Galvanised steel 0.6 mml Width 73.8 mm = profile no. 5615l Width 98.8 mm = profile no. 5616l Width 68.8 mm = profile no. 5660l Width 88.8 mm = profile no. 5677l packaging: 4 lengths per bundlel 16 pieces of cable protection sleeves are
added to each bundle. They are to beclipped into the service cut-outs on site.
l Standard lengths:Profile no. 5615: 2.60, 2.75, 3.00 metresProfile no. 5616: 2.75, 3.00, 3.25, 3.50 metres
l Profile no. 5660/5677 and special lengthsupon demand
l Knurled flange for easier screwingl Fire rating F 90 with 2 x 12.5 mm gypsum
fire protection plaster boardsl Sound insulation values have been verified
by the independent institute EMPA,Dübendorf, Switzerland
l Tests for the sound insulation were carriedout with standard boards and with specialsound insulation gypsum plaster boards
l Cutting to the required length withMaxi-SCW profile cutter art. no. 6424 for:Maxi-SCW sound insulation studs, profilenos. 5615/5616MAXI-CW standard studs profile nos.5215/5216UW runners, profile nos. 5233/5234
49
47
At each end ofa stud there aretwo service cut-outs for clippingon the cableprotection slee-ves.
}acc. DIN
}acc. internationalstandards
width
2 3
10
4
5
1
6
3
7
1
625/600
100
bis
150
9
8 8
11
Partition thicknesses:95/100 mm
115/125 mm140/150 mmMax. partition height:≤ 5000 mmFire rating:F 30-A – F 90 A
Partition weight:26 – 52 kg/m2
MAXI-SCW systems for improved sound insulation values.Single stud partition, single or double layer of board.
PROTEKTORWERK . Florenz Maisch GmbH & Co. KG . Profil-Vertrieb . Viktoriastraße 58 . D-76571 GaggenauTel. +49 - 72 25 - 9 77-0 . Fax +49 - 72 25 - 9 77-4 44 . http://www.protektor.com . e-mail: [email protected]
Corner detail
Plan detail
Side detail
Runner UW 70-100-06MAXI-CW stud 70-100-06MAXI-SCW stud 70-100-06DowelFelt stripInsulating materialSkirting profileInner corner profile art.no. 5170Corner beadGypsum plaster board ≥ 12.5 mmor Fermacell Boards
Joint filler
12
3
4
5
67
8
9
10
11
SCW + singlelayer of boards
SCW + doublelayer of boards
Partition system according to standard DIN 4103 and DIN 18183:Non-load bearing partition systems as single stud partition, either single or double layer of board on both sides.
Technical data and system code:Profiles with a nominal material thickness of 0.6 mm.(Boarding with plasterboards).
MAXI-SCW systems for improved sound insulation values.Single stud partition, single or double layer of board.
Values in brackets (... dB) = partitions with standard CW-Studs.*2nd layer stapled1) Test results nos. 413821/1-8 and 414620/1-8, 418049/1-10 EMPA, Dübendorf, CH.
Installation instructions:• At the wall connection and at 90° corners use the standard MAXI-CW studs.
• Clip the cable protection sleeves 4 (pieces per stud) into the service cutouts of the stud during the mounting of the insulating material.
• Adapt the insulating material to the shape of the sound insulation stud.
• Ensure tight connections to adjacent building components.
• For cutting the profiles a special MAXI-SCW-profile cutter no. 6424 has been developped.
• Boarding and joint filling according to the instructions of the board manufacturers.
• For door openings use reinforcing studs.
• Not suitable for partitions in sanitary rooms with sanitary equipment.
Technical informations for systems with Fermacell-boards on request.
Official test results 1) according to standard EN ISO 717-1/143-3
Partition type Total Max. partitionCode Partition partition Boarding height Partition
cavity thickness each side weight
mm mm mm mm kg/m2
SCW 70/95 70 95 1 x 12,5 3250 26SCW 75/100 75 100 1 x 12,5 3250 26SCW 90/115 90 115 1 x 12,5 3750 26SCW 100/125 100 125 1 x 12,5 3750 26SCW 70/120 70 120 2 x 12,5 4250 52SCW 75/125 75 125 2 x 12,5 4250 52SCW 90/140 90 140 2 x 12,5 5000 52SCW 100/150 100 150 2 x 12,5 5000 52
Insulating Type of boarding material FirePartition type material Gypsum board Gypsum board Gypsum board FERMACELL resistancecode 22 kg/m3 8,5-9,1 kg/m2 9,9 kg/m2 10,7 kg/m2 12,5/15 kg/m2 class with GKF
RW RW RW RW F
D-76571 GaggenauTel. +49 - 72 25 - 9 77- 0Fax +49 - 72 25 - 9 77-4 44http://www.protektor.come-mail: [email protected]
PROTEKTORWERKFlorenz Maisch GmbH & Co. KG
Profil-VertriebGewerbegebiet Birkig
Viktoriastrasse 58Edition 43 10/01 5G 14006
© PROTEKTORWERK 2001
SCW 70/95 60 mm 44 dB (43) – – – –SCW 75/100 60 mm 45 dB 48 dB – 52 dB F 30-ASCW 90/115 80 mm 47 dB (44) – – – –SCW 100/125 80 mm 47 dB 51 dB 51 dB – F 30-ASCW 70/120 60 mm 54 dB (51) – – (12,5 + 10 mm)* –SCW 75/125 60 mm 54 dB 58 dB – 64 dB F 90-ASCW 90/140 80 mm 57 dB (50) – – –SCW 100/150 80 mm 55 dB 60 dB 60 dB F90-A
42 10/01 10G 14025