sound solutions for waterproofing€¦ · e-mail: [email protected] maxxon corporation 920 hamel road...

4
ENHANCED ACOUSTICAL PERFORMANCE DURABLE, SUPERIOR WATERPROOFING ONE ADVANCED DECKING SYSTEM SOUND SOLUTIONS FOR WATERPROOFING FROM AND CON-DEK SYSTEM

Upload: others

Post on 12-Dec-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: SOUND SOLUTIONS FOR WATERPROOFING€¦ · E-mail: info@maxxon.com Maxxon Corporation 920 Hamel Road l P.O. Box 253 Hamel, Minnesota 55340 USA Pli-Dek Systems, Inc 41610 Date St.,

ENHANCED ACOUSTICAL PERFORMANCEDURABLE, SUPERIOR WATERPROOFINGONE ADVANCED DECKING SYSTEM

SOUND SOLUTIONS FOR WATERPROOFINGFROM AND

CON-DEK™ SYSTEM

Page 2: SOUND SOLUTIONS FOR WATERPROOFING€¦ · E-mail: info@maxxon.com Maxxon Corporation 920 Hamel Road l P.O. Box 253 Hamel, Minnesota 55340 USA Pli-Dek Systems, Inc 41610 Date St.,

PROVEN ACOUSTICAL & WATERPROOFING PERFORMANCE with the DEK C-MENT™ & CON-DEK™ SYSTEM

PERSONAL BALCONIES COMMON AREAS CORRIDORS

by MAXXON CORPORATIONMAXXON CORPORATIONAND PLI-DEK A PARTNeRshIP Of INNOvATION

by PLI-DeK

Dek C-Ment is a high-strength underlayment designed specifically for installation with Pli-Dek’s Con-Dek Waterproofing Deck Coating System. Project applications include personal balconies, common areas, and corridors.

Con-Dek System is a durable yet flexible waterproof deck coating designed for use over above-grade concrete substrates. The Con-Dek System provides a wide variety of finish options that offer ultraviolet protection, skid-resistance, and a Class “A” fire rating.

Together, the Dek C-Ment and Con-Dek System provides enhanced acoustical performance with a lightweight waterproof deck coating, for the overall project value today’s building owners and developers demand. With over 100 UL listings, Dek C-Ment also adds enhanced fire control to your project. It’s also GREENGUARD Gold Certified, ensuring an eco-friendly project.

To benefit from “sound waterproofing solutions” on your next project, contact Pli-Dek or Maxxon Corporation today.

Maxxon Corporation and Pli-Dek — together offering enhanced acoustical performance and fire control in exterior waterproof deck coatings

Raising the standards for underlayment systems and exterior, above-grade waterproof decking

Ability to upgrade sound performance with a variety of sound control mats

Over 100 UL Listings

Over 70 years combined industry experience in underlayments and waterproof deck coatings

CON-DEK™ SYSTEM

CON-DEK™ SYSTEM

Dek C-Ment

Acousti-MatCon-Dek

Page 3: SOUND SOLUTIONS FOR WATERPROOFING€¦ · E-mail: info@maxxon.com Maxxon Corporation 920 Hamel Road l P.O. Box 253 Hamel, Minnesota 55340 USA Pli-Dek Systems, Inc 41610 Date St.,

CON-DEK™

SYSTEM

SOUND TEST RESULTS

TECHNICAL DATA TECHNICAL DATASpread of Flame: Intermittent Flame Burning Brand, ASTM E108

Abrasion Resistance: ASTM D968

Static Coefficient of Friction: ASTM C1028-96

Water Absorption: ASTM D570-98

Impact Resistance: ASTM D3746-85

Freeze Thaw: ASTM C 67-03

Accelerated Aging: ASTM D756-93

Tensile Strength: ASTM C297-94

Chemical Resistance: ASTM D2299

Code Listing: ICC-ESR 2097

Class “A”Fire Rating

2.9%

0.835

Pass

Pass

Pass

Pass

Pass

Pass

Pass

UN

DER

LA

YM

EN

T O

NLY

Floor System Topping InsulationResilient Channel

Ceiling Drywall

Hard Suface Flooring † Rating Test Numbers

Wood Joist w/ 5⁄8" (16 mm) plywood subfloor, 2"x10" (51 mm-254 mm) joists

3⁄4" (19 mm) Maxxon* Yes Yes 1⁄2" (13 mm) Yes 45 F-IIC 81-0081

3⁄4" (19 mm) Maxxon* Yes Yes 1⁄2" (13 mm) None 54 F-STC 81-0081

TJI® Joist

w/ 3⁄4" (19 mm) T&G OSB subfloor3⁄4" (19 mm) Maxxon* Yes Yes

5⁄8" (16 mm), 2 Layers

None 58-STC TL96-250

Truss Plate Institute w/ 3⁄4" (19 mm) T&G plywood subfloor

3⁄4” (19 mm) Maxxon* Yes (blown-in) Yes 5⁄8" (16 mm) Yes 57-FSTC 98 67280.10

3⁄4” (19 mm) Maxxon* Yes (blown-in) Yes 5⁄8" (16 mm) Yes 40-FIIC 98 67280.12

AC

OU

ST

I-M

AT

II

Parallel Chord Truss 2"x4" (51x102 mm) w/ 3⁄4" (19 mm) OSB subfloor

1" (25 mm) Maxxon* Yes Yes 5⁄8" (16 mm) Yes 56 F-IIC 98 67280.5

TJI® Joist w/ 3/4" (19 mm) T&G OSB subfloor

1" (25 mm) Maxxon* Yes Yes 5⁄8" (16 mm) Yes 56 F-STC 99 1736.7

1" (25 mm) Maxxon* Yes Yes 5⁄8" (16 mm) Yes 52 F-IIC 99 1736.4

11⁄4" (31.75 mm) Maxxon* Yes Yes 2 layers of 5⁄8" Yes 52 F-IIC 48-06-5

EN

KA

SO

NIC

Wood Joist w/ 5⁄8" (16 mm) plywood subfloor, 2"x10" (51 mm-254 mm) joists

11⁄2" (38 mm) Maxxon* Yes Yes 5⁄8" (16 mm) Yes 57 IIC IN88-2

Parallel Chord Truss 18" deep, 24” OC plywood subfloor

11⁄2" (38 mm) Maxxon* Yes Yes 5⁄8" (16 mm) Yes 59 IIC 7004073

11⁄2" (38 mm) Maxxon* Yes Yes 5⁄8" (16 mm) Yes 58 STC 5004024

TJI® Joist w/ 3/4" (19 mm) T&G plywood subfloor

11⁄2" (38 mm) Maxxon* Yes Yes 2 layers of 5⁄8" Yes 56 F-IIC 48-06-01

11⁄2" (38 mm) Maxxon* Yes Yes 2 layers of 5⁄8" Yes 57 F-STC 48-06-02

AC

OU

ST

I-M

AT

3 Steel Joist 12" Deep (305 mm)

w/ 3/4" (19 mm) T&G plywood subfloor11⁄2" (38 mm) Maxxon* Yes Yes 5⁄8" (16 mm) Yes 57 F-IIC 04-22-1

TJI® Joist w/ 3/4" (19 mm) T&G plywood subfloor

11⁄2" (38 mm) Maxxon* Yes Yes 2 layers of 5⁄8" Yes 58 F-IIC 48-06-03

11⁄2" (38 mm) Maxxon* Yes Yes 2 layers of 5⁄8" Yes 59 F-STC 48-06-04

Parallel Chord Truss20" deep, 24" OC

11⁄2" (38 mm) Maxxon* Yes Yes 2 layers of 5⁄8" Yes 63 F-IIC R05200

PROVEN ACOUSTICAL & WATERPROOFING PERFORMANCE with the DEK C-MENT™ & CON-DEK™ SYSTEM

by MAXXON CORPORATION

NOTE: FSTC — Field Sound Transmission Class in accordance with ANSI/ASTM E336 and E413. STC — Sound Transmission Class in accordance with ASTM E90 and E413. IIC — Impact Insulation Class in accordance with ASTM E492. FIIC — Field Impact Insulation Class in accordance with ASTM E1007 and E989.

International Building Code (IBC) requires a minimum 50 STC/IIC (45 F-STC/F-IIC) in multifamily construction. Because an STC/IIC of 50 provides only marginal sound control, the International Code Council (ICC), author of the IBC, now recommends that an “acceptable” level of performance for both STC and IIC is 55 (52 if field tested). The “preferred” level of performance for STC and IIC is 60 (57 if field tested). Maxxon Underlayments and Acousti-Mat are but single components of an effective sound control system. No sound control system is better than its weakest component. Care must be taken in the selection and installation of all components of construction to ensure the ultimate designed acoustical performance. All acoustical testing was done by Architectural Testing; Riverbank Testing Laboratories; Intest, Inc.; Intertek; Twin City Testing Corporation; Maxxon R & D Test Center; D.L. Adams Associates, L.T.D.; Veneklasen Associates; NGC Testing Services; AV Group or JGL Acoustics. For type of floor covering used, channel spacing and other information, contact Maxxon for test reports by number.

†See test report for full description of assembly. *Approved Maxxon Underlayment. The international Building Code requires a minimum of 45 for field STC and Field IIC.

Up to 4,000 psi (27.6 MPa) when tested in accordance with modified ASTM C109. Static loading to 3,500 psi (24.1 MPa)

Typical density is 115 lbs. per cubic foot (1842 kg/m3)

R-0.202

4.76 Btu/sf/hour/°F/inch thickness (.6854 W/[m•˚C] )

.229 Btu/(lb.•°F) at 85 °F (.9595 kJ/[kg•˚C] at 29.44 ˚C)

Flame Spread – 0, Fuel Contribution – 0, Smoke Development – 0, (ASTM E84)

GREENGUARD GoldSM Certified

Compressive Strength:

Density:

Thermal Resistance at 1” (25mm) thickness:

Coefficient of Conductivity (K):

Specific Heat:

Surface Burning Characteristics:

VOC Emissions:

Page 4: SOUND SOLUTIONS FOR WATERPROOFING€¦ · E-mail: info@maxxon.com Maxxon Corporation 920 Hamel Road l P.O. Box 253 Hamel, Minnesota 55340 USA Pli-Dek Systems, Inc 41610 Date St.,

800-356-7887E-mail: [email protected]

Maxxon Corporation920 Hamel Road l P.O. Box 253Hamel, Minnesota 55340 USA

Pli-Dek Systems, Inc41610 Date St., Suite 104Murrieta, CA 92562

TO LEARN MORE

PLI-DEK GS88-1 SEALER COLORS

SAMPLE FINISHES

PLI-DEK STAIN COLORS

PLI-DEK PATTERN SELECTIONS

Actual colors will vary. Color appearance is affected by lighting, surface texture and method of application. Final color approval should be selected from physical samples.

C O L O R & F I N I S H I N G O P T I O N S

EXECUTIVE GRAY*†

HAND TROWELTop Coat: Sandstone Shading: Wash: Light Buckskin Spot Wash: Terra Cotta Sealer: PD Clear

Top Coat: Hickory Grout: Mud Pie Shading: Wash: Buckskin Sealer: GS99-1

Top Coat: Executive Gray Shading: Spot Wash: Buck-skin, Brandy, Dark Gray Sealer: PD Clear

Top Coat: Sandstone Grout: Mud Pie Shading: Spot: Redwood, Light Buckskin, Light Black Sealer: GS99-1

Top Coat: Arizona Tan Grout: White Shading: Spot Coffee Sealer: PD Clear

Top Coat: Hickory Grout: Dark Gray Shading: Spot: Brandy, Buckskin, Coffee Sealer: GS99-1

Top Coat: Terra Cotta Grout: Executive Gray Sealer: PD Clear

Top Coat: Executive Gray Grout: Dark Gray Shading: Wash: Black, Spot Black Sealer: GS99-1

BLACK

PALOS VERDE STONE

SANDSTONE*†

KING’S SLATE

CONCRETE GREY

TILE

STAMFORD*

TILE

KHAKI

PINK

MEDIUM GRAY

HAND TROWEL

BRANDY

NORMAN COBBLES

PUTTY

PALOS VERDES

EXECUTIVE GREY

HERRINGBONE

MUD PIE* REDWOOD

CUSTOM COLOR CHART

DARK GRAY*†

DOUBLE TILE

BUCKSKIN

KING’S SLATE

TERA COTTA* YELLOW

HICKORY SAND

ARIZONA TAN*†

AMERICAN FLAGSTONE

COFFEE

AMERICAN FLAGSTONE

REVERE*

TILE

PISTACHIO

ADOBE TERRA COTTA

* Select GS88-1 Sealer Colors are available in cementitious tint vials. Actual colors will vary. † Available in RESINYTE™ Floor Coating Systems.

© 2011-2015 Maxxon Corporation. All Rights Reserved. Con-Dek System and associated logos are registered trademarks of Pli-Dek Systems, Inc Murrieta, CA, USA. Dek C-Ment and associated logos are registered trademarks of Maxxon Corporation, Hamel, MN, USA. Printed in the USA. #60085, TA507-7151, 12/15.