southeast 21 2014

After being tabled for decades due to costs, the project was suddenly fast-tracked whenthe Florida Department of Transportation realized the heavily travelled GandyBoulevard corridor is a major evacuation route for Pinellas County residents in theevent of a hurricane.

Phase One of a two-phase project to transform the entire stretch ofGandy Boulevard from just east of Fourth Street N in St. Petersburg to justwest of U.S. 19 in Pinellas Park began in January 2014. Designed to

improve traffic flow along one of Pinellas County’s busiest roads, the design-build project involvestransforming the existing roadway into an elevated six-lane facility (three in each direction)between I-275 and MLK Jr. Street, and four lanes (two in each direction) from MLK Jr. Street toeast of Fourth Street.After being tabled for decades due to costs, the project was suddenly fast-tracked when the

Florida Department of Transportation realized the heavily travelled Gandy Boulevard corridor is a

Project to Transform GandyBoulevard Under Way

I Make America Harley Tour

Stops at Case…8

JCB of Georgia Supports

Lone Survivor Foundation…22

Linder Hosts Oktoberfest in

Columbia, S.C. …14

Inside

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

® SoutheastEdition

$3.00

Published Nationally

October 15, 2014 • Vol. XXVI • No.21 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910

www.constructionequipmentguide.com

By Brenda RuggieroCEG CORRESPONDENT

The $400 million redevelopment of theDaytona International Speedway is movingalong nicely towards its January 2016 comple-tion date. Known as Daytona Rising, the three-year project will be completed in time for the2016 Rolex 24 At Daytona and Daytona 500.According to the project’s Web site, the rede-

velopment involves five expanded andredesigned entrances, or “injectors,” designed tolead fans to a series of escalators and elevators,transporting them to three different concourselevels. Each level features spacious social areas,or “neighborhoods,” along the nearly mile-longfrontstretch. At the conclusion of the redevelopment,

Daytona International Speedway will haveapproximately 101,000 permanent, wider andmore comfortable seats, twice as many rest-rooms, and three times as many concessionstands. In addition, the Speedway will featuremore than 60 luxury suites with track side viewsand a completely revamped hospitality experi-ence for corporate guests. Toyota recently became the first founding

partner of the project. Barton Malow of Orlando,Fla., is the design-builder of the project, andarchitectural design and planning firm Rossetti

Daytona Rising…

Speedway onSchedule to Finish in 2016

Construction Employment, Spending IncreaseConstruction employment expanded in 220

metro areas, declined in 73 and was stagnant in46 between August 2013 and August 2014,according to a new analysis of federal employ-ment data released by the Associated GeneralContractors of America. Association officialsadded that construction spending climbed to

$961 billion from $915.3 billion betweenAugust 2013 and August 2014, a 5 percentincrease, according to federal data also releasedOct. 1.“Even as construction employment continues

to rebound in many parts of the country, otherareas continue to lose ground, or like Phoenix,

backslide,” said Ken Simonson, the associa-tion’s chief economist. “Similarly, while con-struction spending has been increasing overallin the past year, the gains remain uneven. Theindustry appears likely to experience verymixed results by segment and region for the rest

see INDUSTRY page 33

see GANDY page 92 see DAYTONA page 36

By Lori LovelyCEG CORRESPONDENT

Table of Contents ................4

Truck & Trailers Section..............................................42-46

Recycling Section ........53-65

Attachment & Parts Section......................................67-74

Auction Section............90-97

Business Calendar ............96

Advertisers Index ..............98

• October 15, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

WWW.ASCVOLVO.COM

www.construction.sandvik.com

The turningpointof surface drillingA unique , revolving superstructurefor huge drilling coverage . Late stengine technology for pertinentpower and reduced fue l consump-tion. First-c lass safe ty feature s.Absolute operator comfort. Superbaccuracy with TIM3D rig naviga-tion*. Capability to drill eve ry holesize be tween 51 and 127 mm (2”-5”) even in the most challengingconditions. That is what theSandvik DX se rie s surface tophammer rigs are all about.*Available as option

Corporate704-494-8100

Asheville828-687-0620

Greenville252-754-5280

NORTH CAROLINA SOUTH CAROLINA GEORGIA

Charlotte704-596-8283

Raleigh919-661-8710

North Charleston843-414-1120

Forest Park770-319-0074

Scan code and hear whatJimmy Grääs and others appreciate in Sandvik DX

Stability and coverage second to none.

Savannah912-964-8079

Buford678-318-9500

TENNESSEEKnoxville

865-525-1845Chattanooga423-308-7940

NORTH DAKOTAWilliston

701-570-5309Columbia

803-791-0740Piedmont

864-704-1060

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 15, 2014 •

Your VOLVO dealer in:

North CarolinaCharlotteRaleighAshevilleGreenville

South CarolinaColumbiaNorth CharlestonPiedmont

GeorgiaBufordForest ParkSavannah

East TennesseeKnoxvilleChattanooga

North DakotaBismarckFargoMinotWilliston

Asphalt/Pavers/Concrete Equipment1987 BLAW-KNOX PF120H, 5952 Hrs ..........................................................$7,2222004 VOLVO PF5510, 148 Hrs ........................................................................$25,0002006 VOLVO PF6110, 2866 Hrs....................................................................$166,700(2) 2007 VOLVO PF6110, 2809-2994 Hrs ......................................$166,700 Ea.(2) 2008 VOLVO PF6110, 3258 Hrs ......................................$166,700-$167,0002011 VOLVO PF6110, 2288 Hrs....................................................................$206,000

Compactors-Smooth Drum2010 VOLVO DD112HF, 1709 Hrs..................................................................$88,9002008 VOLVO DD118HF, 2030 Hrs..................................................................$83,5002007 VOLVO DD90HF, 1753 Hrs ....................................................................$58,500

Excavators-Crawler2008 VOLVO EC210C LC, 3063 Hrs ..........................................................$122,5002011 VOLVO EC210CL, 3505 Hrs................................................................$138,9002013 VOLVO EC220D, 2345 Hrs ..................................................................$144,500(2) 2013 VOLVO EC220DL, 1954-2517 Hrs......................$139,000-$150,0002008 VOLVO EC240C, 2268 Hrs ....................................................................$80,5552011 VOLVO EC240CL, 2796 Hrs................................................................$150,0002012 VOLVO EC250D LR, 1341 Hrs ..........................................................$189,0002011 VOLVO EC250DL, 2778 Hrs................................................................$161,2502004 VOLVO EC330B, 5800 Hrs ....................................................................$52,777(2) 2011 VOLVO EC340DL, 3291-4099 Hrs......................$177,800-$184,000(5) 2012 VOLVO EC340DL, 2601-3685 Hrs......................$181,000-$211,200(2) 2013 VOLVO EC340DL, 1332-2423 Hrs......................$211,250-$216,7502013 VOLVO EC380DL, 2210 Hrs................................................................$222,0002011 VOLVO EC460C LC, 5726 Hrs ..........................................................$250,0002012 VOLVO EC480DL, 2661 Hrs................................................................$328,000(2) 2013 VOLVO EC480DL, 2143-2351 Hrs......................$324,500-$330,000

Excavators-Mini (up to 12,000 lbs)2004 VOLVO EC55, 6035 Hrs ..........................................................................$27,7772008 VOLVO EC55B, 4263 Hrs........................................................................$40,555

Excavators-Wheel(2) 2011 VOLVO EW180C, 2576-2910 Hrs........................$161,200-$166,7002012 VOLVO EW180D, 1785 Hrs..................................................................$194,500

Motor Graders2002 VOLVO G720 VHP, 2221 Hrs ................................................................$72,2252011 VOLVO G946, 1725 Hrs ........................................................................$211,2002011 VOLVO G946B, 1979 Hrs ....................................................................$211,200

Off-Highway Trucks2004 VOLVO A25D, 6313 Hrs ........................................................................$206,000(3) 2012 VOLVO A25F, 1873-2952 Hrs ..............................$283,500-$305,750(2) 2013 VOLVO A25F, 1198-1603 Hrs ..............................$300,000-$305,000(2) 2011 VOLVO A30E, 3148-3747........................................$283,500-$372,500(8) 2012 VOLVO A30F, 2342-3817 Hrs ..............................$300,000-$328,000(3) 2013 VOLVO A30F, 1940-2406 Hrs ..............................$324,500-$330,000(2) 2012 VOLVO A35F, 2036-2962 Hrs ..............................$388,300-$415,000(10) 2011 VOLVO A40F, 2287-6609 Hrs ............................$322,300-$410,000(20) 2012 VOLVO A40F, 1873-6565 Hrs ............................$367,000-$447,000(2) 2013 VOLVO A40F, 3104-4021 Hrs ............................................$388,300 Ea.2013 VOLVO A40F FS, 2387 Hrs..................................................................$494,750

Sweepers/Boom Equipment2012 BLAW-KNOX FB90, 242 Hrs ................................................................$58,500

Water Equipment - Truck2006 VOLVO A30D, 6864 Hrs ........................................................................$255,750

Wheel Loaders2010 VOLVO L110F, 5170 Hrs ......................................................................$155,6002012 VOLVO L110G, 3266 Hrs......................................................................$200,000(3) 2013 VOLVO L110G, 2128-2816 Hrs............................$228,000-$234,0002009 VOLVO L120F, 6911 Hrs ......................................................................$155,6002009 VOLVO L150F, 6938 Hrs ......................................................................$183,400(3) 2010 VOLVO L150F, 9601-11467 Hrs ..........................$133,400-$133,500(3) 2012 VOLVO L150G, 2674-2765 Hrs............................$267,000-$305,7502011 VOLVO L180G, 4286 Hrs......................................................................$278,0002013 VOLVO L180G, 2879 Hrs......................................................................$334,0002012 VOLVO L250G, 3518 Hrs......................................................................$399,0002003 VOLVO L50D, 7878 Hrs............................................................................$44,4442010 VOLVO L50F, 8049 Hrs ............................................................................$55,5552005 VOLVO L60E, 17059 Hrs ........................................................................$33,3332013 VOLVO L60G, 1464 Hrs ........................................................................$144,0002012 VOLVO L70G, 3019 Hrs ........................................................................$144,500(2) 2013 VOLVO L70G, 2690-2936 Hrs ............................................$147,000 Ea.2005 VOLVO L90E, 6796 Hrs ........................................................................$100,000(3) 2012 VOLVO L90G, 2073-2618 Hrs ..............................$183,333-$194,500(6) 2013 VOLVO L90G, 1491-4259 Hrs ..............................$156,000-$189,000

2009 VOLVO L120F, 6911 Hrs ..................$155,600 2012 VOLVO L150G, 2674 Hrs ................$305,7502012 VOLVO L150G, 2765 Hrs ................$267,000

A40 Finance leasing available for 24 months with payments as low as $7,900 per month. Call Doug Wilson for details.

$

Full inventory at: www.ascvolvo.com

Doug Wilson 704-562-2032 Email: [email protected]

Billy Brice 678-318-9500Email: [email protected]

USED EQUIPMENT


Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2014, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasion-ally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

SPECIAL SECTION53 RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section!

Keep up to date with the latest information on recycling,

crushing and screening.

FEATURES8 I MAKE AMERICA HARLEY TOUR STOPS AT CASE

TO RALLY SUPPORTA nationwide campaign to press Congress to support pro-manufacturing policiesrolled through Racine, Wis., on Sept. 26 when the I Make America Harley Tourstopped at Case Construction Equipment.

14 LINDER THANKS CUSTOMERS WITH

OKTOBERFEST CELEBRATIONMore than 200 guests attended the event and looked over the many machines onhand featuring the latest technology from the manufacturers Linder represents.

22 JCB OF GEORGIA HOSTS TAILGATE PARTY,

FUNDRAISER IN POOLER, GA.JCB of Georgia’s tailgate party and fundraiser in Pooler, Ga., for the Lone SurvivorFoundation on Sept. 26 provided an opportunity to see JCB’s hero of the battlefield and the new JCB hero of the work.

25 FRACKING RULE MAKERS SORT THOUSANDS

OF COMMENTSA member of the North Carolina commission that’s developing fracking regulationssaid the panel has received dozens of public comments that have caused them “toreally go back and do our homework,’’ but thousands of others offer unusableinput such as: “Don’t Frack N.C.’’

26 CICB SUPPORTS CRANE OPERATORS WITH

SPECIALIZED SERVICESWhen construction companies that rely heavily on cranes need their equipmentinspected or their operators trained or certified, those firms are increasingly turning to Crane Inspection & Certification Bureau (CICB) in Orlando, Fla., andHouston, Texas for the company’s expertise.

34 BOMAG APPOINTS MAY AS NEW DEALER

Territory Manager Jerry Fitch and Bomag Americas Inc. announced May Heavy

Equipment is now the authorized Bomag road building equipment distributor in

North Carolina and the northern two-thirds of South Carolina.

66 GOMACO INVITATIONAL #33 FEATURES AEM’S

HARLEY TOUR

Contractors, distributors, suppliers, association members and media personnel from

across the United States and Canada traveled to Ida Grove, Iowa, on Sept. 16 and

17 for the GOMACO Invitational #33.

80 GROUNDBREAKING WOMEN HONORED WITH 2014ARTBA LEADERS AWARDSA 35-year bridge building veteran, a 30-year expert on alternative project

delivery, a well-known international design firm, and two University of Maryland

graduate students were honored as part of the American Road & Transportation

Builders Association’s Transportation Development Foundation (ARTBA-TDF)

“Women Leaders in Transportation Design & Construction Awards” program.

84 SC&R FOUNDATION EXPANDS ITS GRANT

PROGRAM TO AWARD AN ADDITIONAL $25K

The SC&R Foundation has expanded its grant program for individuals wishing to

further careers related to the crane, rigging and specialized transportation industry

through continuing education courses or a vocational/technical program.

EQUIPMENT53 KOMATSU C144 Harvesting Head

58 TEREX AggreSand 165 Washplant

74 PALADIN Bradco Hardscape Grapple

DEPARTMENTS88 CLASSIFIEDS

90 COMING AUCTIONS

96 BUSINESS CALENDAR

Mobile LinkedIn Facebook Twitter YouTube

To read these stories and many more, visit www.constructionequipmentguide.com

IN THIS ISSUE148 22

®

SOUTHEAST EDITIONCirculated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana

• Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands

Founder, Publisher & CEO Edwin M. McKeon Sr.Southeast Publisher Richard C. McKeon

Editor In Chief Craig Mongeau Associate Editor Christine Reckner

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034

215/885-2900Toll Free 800/523-2200

Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates Contact Richard C. McKeon• North & South Carolina• Tennessee •Virginia

704/553-8888Toll Free 800/288-4234

Fax 704/553-8899e-mail [email protected]

Kent HogeboomNational Sales Manager

315/866-1423Toll Free 800/988-1203


Contact Rich Olivier• Alabama • Arkansas • Georgia •Mississippi • Tennessee • Florida Panhandle

770/443-3174Toll Free 800/409-1479


Contact Jim Van Natta• Florida • Virgin Islands • Puerto Rico

407/365-5720Toll Free 800/344-3026


Contact Dale Agnew•Louisiana

Toll Free 877/877-4997 Fax 972/719-2611

e-mail [email protected]


Built with the paving professional in mind.

TAMPA8418 Palm River Rd.Tampa, FL 33619

813-630-0077Fax: 813-630-2233

ORLANDO9601 Boggy Creek Rd.Orlando, FL 32824-

8728407-850-9614

Fax: 407-850-0823

JACKSONVILLE8750 Phillips HwyJacksonville, FL

32256904-737-6000

Fax: 904-737-1260

FORT MYERS5151 Dr. Martin

Luther King, Jr. Blvd.Ft. Myers, FL 33905

239-481-8554Fax: 239-481-3302

DAVIE5210 Reese Rd.Davie, FL 33314954-581-4744

Fax: 954-583-0318

MIAMI(Export Parts

Facility)6144 NW 74th Ave.Miami, FL 33166-

3710305-477-2442

Fax: 305-477-3383

LAKE CITY539 SW Arrowhead

TerraceLake City, FL 32024

386-758-7444Fax: 386-758-7744


The demanding jobs are there. So are you.

Smart Works.TAMPA8418 Palm River RoadTampa, FL 33619813-630-0077Fax: 813-630-2233

ORLANDO9601 Boggy Creek RoadOrlando, FL 32824-8728407-850-9614Fax: 407-850-0823

JACKSONVILLE8750 Philips HwyJacksonville, FL 32256904-737-6000Fax: 904-737-1260

FORT MYERS5151 Dr. Martin Luther King, Jr.Blvd.Ft. Myers, FL 33905239-481-8554Fax: 239-481-3302

DAVIE5210 Reese RoadDavie, FL 33314954-581-4744Fax: 954-583-0318

MIAMI(Export Parts Facility)6144 NW 74th Ave.Miami, FL 33166-3710305-477-2442Fax: 305-477-3383

LAKE CITY539 SW Arrowhead TerraceLake City, FL 32024386-758-7444Fax: 386-758-7744


I Make America Harley Tour Stops at Case to Rally Support A nationwide campaign to press Congress

to support pro-manufacturing policies rolledthrough Racine, Wis., on Sept. 26 when theI Make America Harley Tour stopped atCase Construction Equipment. The eventwas held in conjunction with Case and itsDire States campaign, aimed at finding newways to invest in infrastructure developmentat the state and local level. StateRepresentative Robin Vos (speaker of theWisconsin State Assembly) and StateRepresentative Cory Mason also were inattendance, and spoke as part of a short pres-entation. The custom-painted 2014 Harley-

Davidson Road King has been on the roadthis year to advocate for public policies thatadvance the interests of employees, commu-nities and companies of the equipment man-ufacturing industry. The I Make AmericaHarley has crisscrossed the heartland overthe past few months, placing an emphasis onpolicies important to equipment manufactur-ers like reauthorizing the Export-ImportBank’s charter or passing a long-term high-way bill.The I Make America Harley Tour is part

of the I Make America campaign, a broaderadvocacy effort by the Association ofEquipment Manufacturers (AEM). So far, IMake America has registered more than36,000 grassroots supporters of pro-jobsmanufacturing policies. At each stop, eligi-ble employees and attendees of the event cansign up for a chance to win the custom-designed bike; the winner will be announcedat AEM’s Annual Conference in November.“I Make America was created to be a

force for positive change in the equipmentmanufacturing industry,” said Dennis Slater,AEM president. “Economic conditions inAmerica remain a challenge and we needour government to partner with us toadvance pro-manufacturing policies thataddress those challenges. I Make America is

our platform to spread awareness and maxi-mize our voice in Washington, D.C.” According to AEM, about one in six pri-

vate sector jobs in the United States dependson the manufacturing base. Congress canhelp to create business conditions that willgrow the economy and U.S. manufacturingjobs by encouraging infrastructure invest-ment, protecting U.S. farming and increas-ing American exports for our economy tokeep pace with other countries. “Infrastructure investment is one of the

most important domestic public policyissues we face today, but it’s often overshad-

owed by more emotional issues,” said JimHasler, vice president, Case ConstructionEquipment. “Infrastructure affects all of us. It benefits

local economies, lowers logistics costs toattract new business, improves quality of lifeand of course, there are the obvious benefitsto the manufacturing industry, which in turncreates more jobs domestically.Infrastructure investment should be a top pri-ority, and we’re proud to stand with AEMand I Make America on this issue.” Dire States is Case’s own grassroots effort

to raise awareness for the role that state and

local governments play in securing infra-structure investment, through legislative ini-tiatives, public-private partnerships (P3s),state revolving funds and other innovativefunding methods. The effort kicked off witha nationwide tour in 2013 and 2014, and hastransitioned to an advocacy role, as Case hasworked to support infrastructure funding ini-tiatives in Texas and Wisconsin. For more information, visit

DireStates.com. (This story also can be found on

Construction Equipment Guide’s Web site at

www.constructionequipmentguide.com.)

(L-R) are AEM President Dennis Slater; Wisconsin State Representative Cory Mason; Case IH Vice President Jim Walker;Wisconsin State Representative and Speaker of the Assembly Robin Vos; CNH Industrial Chief Operating Officer — NorthAmerica Brad Crews; and Executive Director of the Transportation Development Association of Wisconsin Craig Thompson.

Crowds sign the “I Make America” Pledge.The crowd gathers at the joint AEM and Case event on Sept. 26, 2014, in Racine, Wis.


www.gsequipment.comJacksonville Orlando Ft. Myers Pompano Beach Tampa

Call the location nearest you today!

Kobelco Full Size Excavators

5 models Operating Weight Bucket Capacity Horsepower Max Dig Depth 48,500 – 181,440 lb 1.05 – 4.58 yd3 157 – 510 HP 20'3" – 35'1"

Powerful

Easy to operate

Comfortable

VERSATILE AND DEPENDABLE

When you need us, where you need us

Ideal for fleets with multiple brands


ascvolvo.com

GEORGIABuford678.318.9500Forest Park770.319.0074Savannah912.964.8079

SOUTH CAROLINACharleston843.414.1120Columbia803.791.0740Piedmont864.704.1060

NORTH CAROLINAAsheville828.687.0620Charlotte704.596.8283Greenville252.754.5280Raleigh919.661.8710

TENNESSEEChattanooga423.308.7940Knoxville865.525.1845

NORTH DAKOTABismarck701.250.4882Fargo701.271.2360Minot701.839.4020Williston701.570.5309

Look to ASC Construction Equipment for industry-leading Volvo motor graders. Every grader in our fleet is built with the power, precision, pull and force you need to get the most out of each and every pass.

You don’t just take the easy road.You drive success making your own.

Smart Works.


HOT USED / RENTAL FLEET SPECIALS2013 Laymor SM400 Sweeper, Enclosed Vista Cab with A/C, 8 Ft. Broom, 74HP Kubota ..........................................................................$46,9002007 Volvo EC210LC Excavator, 4840 Hrs, A/C, Heat, Radio, Wide Pads, 48” Bkt, Hyd Thumb unit#2155 ................................................$83,5002005 Komatsu PC300LC-7 Excavator, 5500 Hrs, A/C, Heat, Radio, Hammer Plumbing, 54” Bkt unit#2025 ................................................$84,5002006 Volvo A25D, 6600 hours, Rebuilt Transmission, AC, Heat, unit#7009 ..............................................................................................$119,0002007 Sakai SV400TF 66” Pad Foot Roller, with Shell Kit, OROPS, unit#8024 ............................................................................................$54,000

Call Will Blackerby 336-357-5005

www.mayequip.comColumbia, SC (803) 409-0460

www.mayequip.comLexington, NC (866) 629-3784

www.mayequip.com

Lexington, NC(866) 629-3784

Columbia, SC(803) 409-0460

May Heavy EquipmentYour Authorized Distributor

Ask about 0% Financing

RENTALS • SALES • PARTS • SERVICEHYUNDAI

Reliability backedby the best industrywarranty, Hyundai,Moving You Further.Choose Hyundai for your next job.

BOMAG TEREX

• 300 HP Class • Best maneuverability in its class• Four fully steerable tracks • Hydraulic side plates• Low operating cost • Folding conveyor standard

Terex ArcticTrucks Powerful& ProductiveTerex Gen 9trucks are built for productive

hauling, with bodycapacities that arematched to their outstanding powerand braking abili-ties. Terex Gen 9 trucks are a powerful and

productive choicefor any job site.

BM1300/30MILLING MACHINE

Hydrema

proudly welcomes

Power Equipment

Company

as the newest

member of our

dealership family.

High quality and innovative equipment

Denver500 E 62nd AveDenver, CO 80216Call 303-288-6801

Colorado Springs2940 E. Las Vegas St.Colorado Springs CO 80906Call 719-392-115

Grand Junction2329 River RoadGrand Junction CO 81505Call 970-243-0722

Greeley8806 E Us Hwy 34JohnstownCO 80534Call 970-669-6209

New Mexico100 Barr Ave. SEAlbuquerqueNM 87105Call 505-344-9466

Wyoming3251 MJB RoadCasperWY 82601Call 307-577-970

Utah4230 Farm RoadWest Jordan, UtahUT 84088Call 801-280-4105

POWER EQUIPMENT COMPANY LOCATIONS

Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900

Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111

Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283

Guy Roof2091 Bishop Rd. • Greensboro, NC 27406

[email protected]

2010 DOOSAN DX350LC 2150 HRS, AYX HYD, 54” BKT, EXC.CONDITION ......................................................................SOLD2007 KOMATSU D61PX-15EO 5918 HRS, 60 TO 70% U/C,VERY GOOD CONDITION ............................................$89,5002007 KOMATSU WA430-6 3850 HRS, 23.5X25 RADIALS,4.6YD GP BKT W/B.O.E. ............................................$149,000TEREX TA40 GEN 7 4500 HRS, TIER III, EXCELLENT CONDI-TION ..........................................................................$145,000ATTACHMENTS(2) 36” HENSLEY KOMATSU PC150 BUCKETS WITH SIDE CUTTERS LIKE NEW ................................................$1,500 EA.

ADDITIONAL EQUIPMENT AVAILABLE

2008 VOLVO EC210CL

7557 HRS, 48” BKT, PROGRESSIVELINK HYD,THUMB 70%, VERY GOODCOND$79,000

2008 VOLVO EC210CL4725 HRS, 48” BKT, PROGRESSIVELINK, HYDTHUMB, VERY GOODCONDITION,NEW RAILS,SPROCKETS &TOP ROLLERS$95,000

1978 DEERE 670A

SCARIFIER30% RUBBER,GOOD CONDITION$15,000

2008 CAT 315CL

4587 HRS, 42” BKT, PROGRESSIVELINK HYD,THUMB 50%PLUS UC,VERY GOODCOND$95,000

1999 HITACHI EX160LC-5

11,155 HRS,AUX HYD, 36" BKT, A/C,50% U/C VERYTIGHT &DRY!! WORK READY$37,500

2006 TEREX TA30G7

7200 HRS,TAILGATECLEAN & DRYREAR TIRES30% OVERALLVERY GOODCOND.$75,000

2009 KOMATSU D31EX-22

1780 HRS, 80 TO 90%U/C PATBLADE, EXCELLENTCOND.$42,500

1993 CAT 325L

11,500 HRS,60% U/C, 54”BUCKET, VERYDRY, STRONGENGINE & HYD$39,500

2006 KOMATSU PC220LC-8

7349 HRS, 48” BKT, PROGRESSIVELINK, HYD.THUMB, 50% U/C,VERY GOODCOND.$82,500

2007 KOMATSU D61PX-15EO

6500 HRS75% U/C VERYGOOD COND$69,500

Free Delivery within 200 Miles!

SOLDSOLD SOLDSOLD



see OKTOBERFEST page 40

Linder Thanks Customers With Oktoberfest CelebrationOn Oct. 2, Linder Industrial Machinery Company held

an Oktoberfest celebration at its Columbia, S.C.,location to thank its customers for their business and

to show them some of the new product offerings. More than200 guests attended the event and looked over the manymachines on hand featuring the latest technology from themanufacturers Linder represents.

Linder Industrial Machinery Company has 16 locations inkey cities throughout North Carolina, South Carolina andFlorida. This allows for quick service response time andlocal parts accessibility.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG

(L-R): Tug Nix and Bill Winters, both of Linder Industrial Machinery; and David Rechter and TravisPadgett, both of Rogers Group Inc., Nashville, Tenn., discuss the Vogele product offerings from TheWirtgen Group.

Linder Industrial Machinery has recently taken on theAtlas product line. Company President John Coughlinstands in front of the material handler.

(L-R): Ryan Di Tommaso of Linder IndustrialMachinery; and Michael and Robert Armstrong ofArmstrong Contracting in Columbia talk about thequality Komatsu excavators.

(L-R) are Scott Rankin, Argos/Ready Mix, Columbia, S.C.; Ed Baggett,Linder Industrial Machinery; Gene Kendrick, Iron Planet; and BillCross, Linder Industrial Machinery.

Dammon Ammons (L) and Kevin Skull, both ofFairfield Electric Cooperative Inc., stop to take a lookat the Genesis attachment.

(L-R): Earl Person and Tracy Skipper, both of LinderIndustrial Machinery, go over the specifics of thisKomatsu D51PXi dozer equipped with machine con-trol with David Wilson of Rogers Group Inc., Nashville,Tenn.

Joe (L) and Henry Carter of Barringer Sand inPageland, S.C., talk about the Komatsu excavator andKleemann crusher demo.


Announcing Our New Distributor in ArizonaThe Worldwide Leader in Concrete Paving Technology

[email protected] � www.gomaco.com

CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKS RECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS

GOMACO CORPORATION IN IDA GROVE, IOWA, USA � THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY � 712-364-3347

ARROW EQUIPMENTServing Western North Carolina

(800) 277-2080

CarolinaCat.com

BLANCHARD MACHINERYServing South Carolina

(800) 922-2790

BlanchardMachinery.com

GREGORY POOLEServing Eastern North Carolina

(800) 447-3112

GregoryPoole.com



(800) 277-2080CarolinaCat.com


(800) 922-2790BlanchardMachinery.com


(800) 447-3112GregoryPoole.com

500 Lincoln County Pkwy Ext., Lincolnton, NC 28092 Call 704.966.3300 or www

50

4


(800) 277-2080

CarolinaCat.com


(800) 922-2790

BlanchardMachinery.com


(800) 447-3112

GregoryPoole.com


EXPERIENCE THE DIFFERENCETakeuchi o�ers the most innovative and advanced line of compact equipment on the planet. Come and see what everyone else is talking about. Experience Takeuchi — Visit your local dealer today.

ERIEPEX

I DEH TECNE

ECNREFFE

ERIEPEXhs tre�i ohcuekaT

e amo. Ctenale phte dlaoc lrou ysitiV

I DEH TECNEdd ane avitavonnt isoe me isle enoyrevt eahe wed sn

.yado tlerae

ECNREFFEt ecapmof ce ond liecnavd

. tuobg aniklas te i eirpexE

nt onempiuqt e —hiuceka T Taenc

F

S

T

O

.

H&E Equipment Services

4425 Bluff Road

Columbia, SC 29209

803-776-8465

www.HE-Equipment.com

NEW DEALER

RENTALS | SALES | PARTS | SERVICE

t V

E

I

E

n

F

S

T I

O

.

Visit H&E Equipment Services Today!

2009 Komatsu WA150-5, 1598 Hrs, HydQ/C, Aux Hyd, Side Dump Bkt, ForksAvail., LOADED!, Stock# 794H ..$86,500

1984 Grove TMS250B, EROPS, 6x6,80’ Reach, 26’-46’ 3 Sec Boom, Stock#482G ........................................$37,500

(2) 2011 Cat 336DL, Both under 4,000Hrs, Aux Hyd, Hyd Q/C, SBG Pads,Straight Travel, 12’10” & 10’8” Stick,Work Ready! ....................$227,500 Ea.

2008 Cat 120M VHP, 3806 Hrs,EROPS, 14’ Mold Board, A/C & Heat, 6New Tires, Stock# 594H ........$138,000

2013 Unused Volvo DD25W, ROPS, Water System, 47” Drums, 4 Hrs, Stk#’s911H & 910H......................$36,000 Ea.

2012 Volvo EC250D LR, 4624 Hrs, 60’Reach, 60” Bkt, A/C & Heat, Tier 4,Stock# 719H ..........................$165,000 2011 Cat 304D CR, 970 Hours, EROPS,

Aux Hyd, Hyd Tilt Blade, Stk #409H...................................................... $46,500

2005 Cat CP-563E, 84” Padfoot, DozerBlade, OROPS, 1,000 Hrs, 1-Owner!Stock# 976H ............................$82,500

2009 Deere 644K, 3.5k Hrs, Aux Hyd,Hyd Q/C, New Radial 25x23.5 Rubber,EROPS, Clean!, Stock# 818H$162,500

1994-2000 XL4100, New Paint, Serviced................................Starting at $14,500

New Witzco Lowboys, CustomizationAvailable, 35-50 Ton in Stock ........$Call

2012 Cat 312EL, 1007 Hrs, MechanicalThumb, Tier 4, Stock# 749H ....$139,500

(4) Avail.In Stock New Many Lowboys in Stock!

NEW/UNUSED

(2) Available

Low HoursLow Hours

Low Hours

BRANDYWINE TRUCKS AND EQUIPMENTwww.brandywine-eqp.com

Shipping & Containerization AvailableCall David Basulto, Keith Davis or Tom Jacklin 301-372-0083Wholesale/Export Call Hank Meinhardt at 240-417-3236

WE BUYTRUCKS!

WE BUY EQUIIPMENT!



Contact your sales representative to see how we can make a difference for you.

Angier Branch836 North Broad Street • Angier, NC 27501

919-935-0505

NewLocation

Raleigh/Durham Branch919-556-9110 • 877-469-3471

www.ccsequipment.com


JCB of Georgia’s tailgate party and fundraiser inPooler, Ga., for the Lone Survivor Foundationon Sept. 26 provided an opportunity to see

JCB’s hero of the battlefield and the new JCB heroof the work. In addition to seeing virtually theentire line-up of JCB machines, guests saw the U.S.military’s HMEE (high mobility engineer excava-tor) and the new JCB 3CX backhoe loader, andthey had a chance to enjoy lunch, games, equip-ment rodeo competitions and prize drawings. Anice turnout of customers, representatives of JCBand JCB of Georgia, prominent local political lead-ers and Savannah Economic DevelopmentAuthority leaders made for a successful event. This event is the first stop on a road show across

the southeastern United States. At each of the tourstops, JCB is collecting signatures on its “ShowYour Support” banner to raise money for the LoneSurvivor Foundation, an organization dedicated tothe recovery and healing of wounded Americanservice members and their families, struggling withinvisible injuries such as combat trauma stress,mild traumatic brain injury and chronic pain man-agement.Designed and built by JCB in Savannah, Ga., for

the U.S. Military, the HMEE is a fully armored, 16-ton (14.5 t) backhoe loader, capable of speeds up to60 mph. During the open house, the public had therare opportunity for a close up view of the HMEEand its ability to maneuver. The construction indus-try was revolutionized when JCB developed thefirst backhoe loader in 1953 providing a powerful,easy-to-operate earthmoving tool.Nearly half of all backhoe loaders sold around

the world today are manufactured by JCB. Thenewest JCB backhoe loader is the 3CX. Producedat the Savannah manufacturing facility, the 3CX isbuilt right for today’s market and is affordablewithout compromising quality and power. Thetechnology and durability that are applied to build-ing the HMEE to withstand the most difficult workconditions are utilized in building the entire JCBbackhoe line of equipment.“Being selected by the U.S. Military to build a

backhoe loader that will stand up to battlefield con-ditions and get the job done is an honor. Being ableto support the Lone Survivor Foundation throughour HMEE and New JCB 3CX Road Show is aprivilege,” said Thom Peebles, JCB vice president-marketing. “We are proud to team up with anorganization that is working diligently to supportservice members and their families in their transi-tion back to civilian life”The Lone Survivor Foundation is a nonprofit

501(c)(3) organization founded in 2010 by MarcusLuttrell, author of Lone Survivor, the 2007 numberone New York Times best-selling book, to provideholistic healing that restores, empowers and renewshope for wounded service members and their fam-

ilies through retreats focusing on health, wellnessand therapeutic support. These retreats aredesigned to provide exceptional therapeutic, out-door and unique opportunities that optimize recov-ery and healing, specifically meeting the needs ofAmerican wounded service members and theirfamilies struggling with invisible injuries such ascombat trauma stress, mild traumatic brain injuryand chronic pain management. Lone Survivor Foundation provides free assis-

tance to America’s wounded service members andtheir families, both active and retired, to help themadjust to the effects of their experiences and transi-tion back into their lives. For more information on Lone Survivor

Foundation visit www.lonesurvivorfoundation.org. (This story also can be found on Construction

Equipment Guide’s Web site at www.construc-tionequipmentguide.com.) CEG

see JCB page 38

JCB of Georgia Hosts Tailgate Party, Fundraiser in Pooler, Ga.

Gayle Humphries (L), CFO of JCB of Georgia, presents oneof the first prize drawings of the day, a pair of GeorgiaTech football tickets to Laura Sturgess, Downs Heating &Air, Savannah, Ga.

Christopher Merritt (L) and Patrick Nesbitt volunteertheir time to promote Marcus Luttrell’s book, LoneSurvivor, and the Lone Survivor Foundation.

(L-R): Tony Reardon, JCB of Georgia dealer principal;Patrick Smith, district sales manager, JCB; and ThomPeebles, vice president of marketing, talk before the openhouse event.

Mark Griffths of the JCB backhoe loader growth teamfrom the U.K. came to the U.S. specifically to manage thebackhoe road show and proudly demonstrates the mili-tary JCB HMEE during the event.

Matt Morris, territory sales representative of JCB of Georgia’s sistercompany, Gridiron Aftermarket, works the event after only three dayson the job.


equipment.comder.borwww

Branch Manager: Dwayne Collins(706) 737-9191Augusta, GA 309092804 Wylds RoadAUGUST

equipment.com

Branch Manager: Dwayne Collins(706) 737-9191Augusta, GA 309092804 Wylds Road

AUGUSTTA

Branch Manager: John Whitley(770) 322-6960Atlanta, GA 30288

eland A3185 MorATLANTTAAATLANT

Branch Manager: Dwayne Collins

Branch Manager: Marty W(912) 748-2828

, Poolerr, GA 31322109 Shar

ANVVANNAHSAAV

Branch Manager: John Whitley

Atlanta, GA 30288ve.eland A

darBranch Manager: Marty W(912) 748-2828

, GA 31322on Ct.109 Shar

ANNAH


Fracking Rule Makers SortThousands of CommentsBy Jonathan DrewASSOCIATED PRESS

RALEIGH, N.C. (AP) A member of theNorth Carolina commission that’s develop-ing fracking regulations said the panel hasreceived dozens of public comments thathave caused them “to really go back and doour homework,’’ but thousands of othersoffer unusable input such as: “Don’t FrackN.C.’’ The Mining and Energy Commission

expected to receive 50,000 comments by thetime the period for public input ended,though that could be exceeded if there’s alate surge, said commission member JamesWomack. Hundreds of comments weredelivered at four public meetings around thestate marked by chanting and singing bypeople who fear toxic chemicals couldescape the wells. Still, he said, the meetings and online sub-

missions have produced astute recommen-dations for and against fracking. “Each of the four hearings had at least a

dozen commenters where they had actuallydigested the rules and had specific com-ments ... and had some very innovative andthought-provoking suggestions that we havegiven really serious consideration to, thatcaused us to really go back and do our home-work,’’ Womack said. Womack and two other hearing officers

will work with commission staff to prepare areport on the comments for the entire 15-member commission to consider at meetingsin October and November. The commissionplans to vote on any rule changes by late thisyear, and the Legislature will have the finalsay during its session starting in January. Gov. Pat McCrory signed a law this sum-

mer clearing the way for permits to be issuedas soon as next spring for hydraulic fractur-ing, which involves injecting water, sand andchemicals to break apart underground rocksso oil and gas can escape. Fracking proponents say it can be done

safely and that affordable natural gas helpsmanufacturers create more jobs. Scientists believe pockets of natural gas

exist in layers of shale under Chatham, Leeand Moore counties southwest of Raleigh,but there are disputes about how much isthere. Crystal Feldman, a spokeswoman of the

Department of Environment and NaturalResources, said that the state plans to studyisotopes from existing wells in the shalebasin that runs through those counties during

the current fiscal year. The state also is seeking bids to take rock

samples in the Cumberland-Marlboro Basin,which runs across Scotland, Hoke andCumberland counties. Testing this fiscal yearwas scuttled in the mountains and closer tothe coast. Much of the feedback Womack has seen

pertains to about 20 of the more than 100proposed rules. Commenters are concernedabout the distance wells must be fromhomes, chemical disclosures, groundwatertesting, permitting and well constructionstandards. Still, thousands of comments simply say

“Don’t Frack N.C.’’ “We’ve gotten thousands of comments on

things we have no authority over,’’ he said,adding that those comments will be noted ina report for legislators but won’t affect hiscommission’s work. As many as 500 people attended each

public hearing, with many giving impas-sioned speeches to cheers and boos. Themeeting in Sanford was nearly canceledbecause of security concerns. “We had to turn the volume up on the

speakers several times because they had aband outside trying to drown us out,’’Womack said of that meeting. However, Womack and commission

chairman Vikram Rao said they weren’t sur-prised by the unruliness. “If anything, I am surprised by how well

it all went. Look, I went to grad school inCalifornia in the late 60s. Trust me, I knowprotests. As protests go, this was pretty nor-mal,’’ said Rao, who attended the meetingsin Culhowee and Raleigh. Rao said the commission has backup

manpower in place to handle any late surgein comments. “We have no choice but to consider every

one,’’ he said. On Sept. 26, the North Carolina League of

Conservation Voters turned in 11,000 com-ments. Canvassers asked people in Wakeand Mecklenberg counties to sign statementsexpressing concern about the rules. “We call on the MEC today to heed the

cries of North Carolinians across this state.Don’t cut corners in order to entice in anindustry that will leave us sick and emptyhanded,’’ Aiden Graham, the group’s fielddirector, said at a news conference,“Strengthen the rules.’’

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)


CICB Supports Crane Operators With Specialized ServicesBy Eric OlsonCEG CORRESPONDENT

When construction companies that rely heavily on cranesneed their equipment inspected or their operators trained orcertified, those firms are increasingly turning to CraneInspection & Certification Bureau (CICB) in Orlando, Fla.,and Houston, Texas for the company’s expertise.For the past 45 years, CICB’s certified subject matter

experts have helped thousands of companies and organiza-tions in many industries around the world to reduce risk topersonnel and equipment. It also works to increase equip-ment reliability, longevity and productivity; improve workermorale; save time and money; achieve and maintain thehighest level of safety, regulatory compliance and certifica-tion for every type of material-handling and lifting equip-ment. CICB also is a veteran-owned and operated company,

with service as its commitment.Most recently, much of CICB’s work has been providing

mobile crane operation certification training in response tothe rapidly approaching Nov. 10 deadline for national certi-fication, mandated by the federal Occupational Safety &Health Administration (OSHA) for those in the constructionindustry. “In the construction industry, we mainly assist those com-

panies to get their mobile crane operators nationally certifiedto meet the most recent OSHA crane law,” said Director ofSales and Marketing, Billy Cook. “With the deadline com-ing up for all mobile crane operators to be nationally certi-fied, we provide that service at least once a month — some-times three times a month — at our two training centersusing our equipment. We also provide that same service forconstruction companies at their locations using their class-rooms and their cranes.”CICB’s crane operation certification training is generally

a four-day program, which can extend another day or twodepending on the number of different types of cranes onwhich a student needs to certify, according to CamilleSingletary, sales and marketing administrator of CICB.Where CICB excels in its programs, Singletary said.

CICB offers comprehensive training and certification at bothof its two training centers on all crane types. Singletary describes CICB’s offerings as “a complete

turnkey program.”CICB uses the National Commission for the Certification

of Crane Operators (NCCCO) to certify its trainees, anorganization that Cook considers to be the “gold standard”.“CICB has been training and NCCCO has been certifying

crane operators, riggers, signal people, inspectors and liftdirectors for more years than anyone else in the industry.“The NCCCO certifies people on four types of cranes:

they use a fixed-cab classification, which encompassesindustrial cranes like carry-deck cranes, stand-up boomtrucks and other industrial cranes where you either stand upto operate it or the cab doesn’t move with the boom,” Cooksaid. “The second classification they work with is swing cab,which would encompass rough-terrain cranes — some peo-ple call them cherry pickers. There are two other classifica-tions, as well: lattice-boom crawler cranes and lattice-boomtruck cranes.”All of CICB’s instructors also are NCCCO-accredited

practical examiners, Singletary said. Because of the loom-ing certification deadline, the NCCCO Programs that thecompany offers have been doubling in size for all locations.

NCCCO-certified crane operators need to be recertifiedevery five years.

CICB Provides Crane Inspections TooAnother important part of CICB’s business is in the

inspection of cranes for both construction and general indus-tries.

“Not only are our inspectors nationally certified byNCCCO and backed by third-party liability insurance, butthey regularly receive education and updates regardingOSHA and ANSI/ASME laws and regulations,” saidSingletary. Cook said there has been a positive move for most gener-

al contractors to require true third-party inspections forcranes before they are moved onto their work sites.“The idea is to overcome the potential conflict of interest

for a crane owner inspecting their own crane, which alsomeans they may be inspecting their own work, as well,” hecontinued, “and it also eliminates somebody who is inspect-ing a crane writing a work order to repair that crane himself.So the true third-party inspector, which CICB is, has as itsgoal the safety of the crane and all the people that work

around it. We want to make sure that at the end of the dayeverybody goes home to their families.”CICB conducts many of its crane inspections in countries

across the globe. For example, this fall, many of CICB’sinspectors are working in the Persian Gulf country of Qatarfor the second year in a row to inspect about 150 cranes thatare being used to build oil and gas refineries in the country.

CICB Offers a Complete Range of Services

Part of the comprehensive training services CICB offersare programs for riggers and signal people, as well as train-ing crane inspectors, aerial work platforms and forkliftsoperators, and safety awareness for managers and supervi-sors.“A lot of the forklift and aerial lift training that we do

involves teaching our customers’ trainers, so that they canprovide their own in-house programs,” Cook said. “Theyneed to be trained as competent and qualified. According toOSHA and ANSI/ASME, ‘qualified’ means ‘a person with arecognized degree or certificate or a person that has beentrained with extensive knowledge and extensive experience.’‘Competent’ means that they have the ability to changesomething if they see it is unsafe. Some people, though, arerequired by OSHA and ANSI/ASME to be both competentand qualified.”

CICB Now Conducts More AuditsRecently, CICB has provided a number of crane and rig-

ging audits with the goal of making the workplace safer byhelping construction and manufacturing companies achieveand maintain OSHA, ANSI/ASME and corporate compli-ance.“We want to help our customers decrease their mainte-

nance costs and increase the reliability and life of the equip-ment, as well as to increase their production, improve work-er skills and morale, and lower risk,” Cook said. “Loweringof risk, of course, involves decreasing near misses, accidentsand injuries and death.”Those also are CICB’s goals for all of its training pro-

grams. It shares its client’s training and safety goals andwants to be a part of maintaining their training and safetyawareness culture, according to Cook. “We can show that a company owning and operating a

crane, if they inspect everything properly, can actuallyincrease the life and reliability of their equipment,” Cooksaid.He acknowledges that CICB’s crane and rigging audits

are one of its big growth areas, largely because he believesthat construction and manufacturing companies, as well asinsurance firms, have recognized the true worth of spendingseveral thousand dollars for a five-day audit that might wellsave them many thousands more in the long run.“When these companies are looking at the National Safety

Council’s statistics on workplace injury, and reading that theaverage injury went from costing them $27,000 to $37,000in just two or three years and that punitive damages fromlawsuits went from $13 billion up to $100 billion during thattime, they see that spending $15,000 to have us look overtheir crane and rigging programs, where we offer recom-mendations to make it safer, is something of interest tothem,” Cook said.

(This story also can be found on ConstructionEquipment Guide’s Web site at www.constructionequip-mentguide.com.)


SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

• No tools required• No expensive

hardware needed• No more rags

stuffed into hoses• No more messy

plastic caps• The ultimate

contamination control tool• One hand installation• Eliminate hydraulic

oil spills & clean up• Quick installation

& ease of usage• Safe for personnel

& environment• Industry acclaimed• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com


AGC Presents Independence Excavating With Safety AwardFor a second time, Associated General

Contractors (AGC) awarded IndependenceExcavating its National AGC SafetyExcellence Award — First Place in theFederal and Heavy Division for 700,000 to 1million hours worked. IndependenceExcavating received this award based uponits exceptional safety performance, well-implemented safety program and an incidentrate at least 25 percent below that of its AGCmember peers.Independence Excavating’s Safety

Director Tom Steblinski cited the firm’s per-sonalized safety approach as the basis forthis award, as well as the absence ofreportable injuries on major projects includ-ing the Cleveland Convention Center demo-lition and site package and the Ford BrookPark engine plant demolition. “In my experience outside the firm,

[Independence Excavating’s] safety pro-gram is unlike most construction companieswhere safety personnel are office-based, pro-cessing workers’ compensation and paper-work. Our safety specialists and coordina-tors spend 80 percent of their time in thefield developing relationships with the guysdoing the work. We’re not the safety police,trying to catch them doing somethingwrong. We develop trusting relationships

with the workers and get their buy-in onsafety. Our safety personnel come from fieldpositions; we’ve been in their shoes. Theguys understand that we’re here to help themgo home safely to their families by abidingby safety regulations, all while helping themdo their jobs,” said Steblinski.The firm also finds its safety commitment

creates cost savings for its clients “Accidents — especially severe accidents

— will impact the day of the event and, tosome extent, the schedule going forward. Wemaintain utmost safety measures because weunderstand that accidents affect morale, thespeed of work, and our team’s comfort. Ourcommitment to safety and preventing

accidents delivers cost savings on each proj-ect,” said Steblinski.In fact, Independence Excavating remains

one of the few Ohio construction firms of itssize that is approved by the state of Ohio toself-insure workers’ compensation. The firmwas awarded self-insured status in 2005because of its strong financial standing andexcellent safety record. “We pass the cost savings gained from not

having to pay premiums on to our clients,giving them an even better price on eachjob.”With offices in Cleveland, Pittsburgh and

Chantilly, Va., Independence Excavating isan industry leader in challenging site devel-opment, heavy industrial applications, dem-olition, environmental solutions, concreteconstruction, aggregate crushing and one ofthe Midwest’s premier and diversified con-struction companies. Founded in 1956 bythe DiGeronimo family, IndependenceExcavating has earned a solid reputation forhonesty, integrity and outstanding perform-ance.For more information, visit

www.indexc.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

PRNewsFoto/Independence Excavating Inc. photo(L-R) are Willis Construction Practice Chairman, Paul Becker; IndependenceExcavating Safety Director Thomas Steblinski; Captain Richard Phillips;Independence Excavating President Victor DiGeronimo Jr.; and Associated GeneralContractors President Paul Diederich.

JCB Launches HMEE, 3CX Backhoe Southeastern RoadshowIn celebration of its heritage as the inventor of the orig-

inal backhoe loader, JCB is taking its highly specializedmilitary backhoe loader, the HMEE (high mobility engi-neer excavator), on tour along with its all-new, commer-cial-purposed 3CX backhoe loader. The JCB of Georgiaequipment dealership in Pooler, Ga., is the first stop onthis roadshow across the southeastern United States.At each of the tour stops, JCB is collecting signatures

on its “Show Your Support” banner to raise money forthe Lone Survivor Foundation, an organization dedicat-ed to the recovery and healing of wounded Americanservice members and their families. Many of these serv-ice members struggle with invisible injuries such ascombat trauma stress, mild traumatic brain injury andchronic pain management.Designed and built by JCB in Savannah, Ga. for the

U.S. Military, the HMEE is a fully armored, 16-ton (14.5t) backhoe loader capable of speeds up to 60 mph.During each open house, the public will have the oppor-tunity for a close-up view of the HMEE and its ability tomaneuver.The construction industry was revolutionized when

JCB developed the first backhoe loader in 1953 provid-ing a powerful, easy-to-operate earth-moving tool.Today, nearly half of all backhoe loaders sold around theworld are manufactured by JCB. The newest JCB back-hoe loader is the 3CX. The technology and durabilitythat are applied to building the HMEE to withstand themost difficult work conditions are utilized in building theentire JCB backhoe line of equipment.

“Being selected by the U.S. Military to build a back-hoe loader that will stand up to battlefield conditions andget the job done is an honor," said Thom Peebles, vicepresident of marketing. "Being able to support the LoneSurvivor Foundation through our HMEE and new JCB3CX Road Show is a privilege. We are proud to team upwith an organization that is working diligently to supportservice members and their families in their transitionsback to civilian lives.”For more information, visit www.jcb.com.(This story also can be found on Construction

Equipment Guide’s Web site at www.constructionequip-mentguide.com.)

Trip Tollison, SEDA president and CEO of theSavannah Economic Development Authority, sits atthe controls at the JCB Backhoe Loader Roadshowat JCB of Georgia.

The World Famous JCB Dancing Diggers, perform for thecrowd at the first stop on the JCB Backhoe Loader Roadshow.


We Specialize in Quality - One Owner &

Late Model Machines!

2008 Peterbilt340 Rollback

Cummins, 330HP, 212K Miles, 10 Spd,

Jerr-dan Rollback Bed

$84,900

2001 Ford F750 XL

163,153 Miles, Drive Side, Left Hand Drive,

Autocrane 6006H, Hyd.Outriggers

$27,500

2001 Cat D6R XL

14,000 Hrs, New Rails,New Bottom Rollers, New Idlers! Excellent

U/C!

$85,900

2014 EagerBeaver

50GSL-BR50 Ton De-Tach,

Beavertail w/Ramps,Pony Motor, CoveredWheels, **In Stock**

Priced to Move!

2008 CAT325DL

6800 Hrs, One Owner, Cat Hyd. Thumb, Excellent U/C

$149,900

www.interstateeq.comN. Seymour Dr., Thomson, GA 30824

(706) 595-1550

Case Construction Equipment deal-er Hills Machinery announced theopening of a new facility in Charlotte,N.C. Located at 11717 Reames Rd., the

new 22,000 sq. ft. (2,043.9 sq m) facil-ity features eight service bays with thelatest equipment diagnostic and serv-ice technologies. The new operationwill employ between 15 to 25 peopleto serve customers in the Charlottemetro area and surrounding communi-ties. The Charlotte operation will fea-ture new, used and rental equipment, aswell as heavy equipment services. “The Charlotte market is dynamic,

and our customers work extensivelythroughout North and South Carolina,”said Jim Hills, dealer principal, HillsMachinery. “Our customers are bestserved with a strong presence in thearea — and accessibility to equipmentand service is critical. We’re commit-ted to providing the most comprehen-sive service in the Carolinas, and thisnew location helps us achieve that.” In addition to its headquarters in

Columbia, S.C., and its new Charlottefacility, Hills Machinery operates threeadditional locations in Greenville andRaleigh, N.C., as well as Charleston,S.C. The company employs a total of70 people at all five locations. For more information on Hills

Machinery, call 866/840-0440 or visit

www.hillsmachinery.com. For moreinformation on Case ConstructionEquipment, visithttp://www.CaseCE.com.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

Hills Machinery Announces Openingof New Facility in Charlotte, N.C.

Service technicians Kip Butterfield (L) and Donnie Creech each havemany years of experience working on different types of constructionequipment.

S/N F1I9-1692, 115’MAIN BOOM, 61’ BI-FOLD SWINGAWAY,MAIN WINCH, AUX.WINCH, DETROITDIESEL SERIES 60ENGINE, 16,000 LBS.COUNTERWEIGHT,GREER LMI MICRO-GUARD, CALC SYSTEM,AUXILIARY HEADSHEAVE, ALUMINUMDECKING, BLOCK,BALL$265,000

1999 LINK BELT HTC8675 (75-TON HYD. TRUCK CRANE)

S/N 12544, 94' MAINBOOM, 43' SWINGAWAYJIB, MAIN WINCH, CUMMINS 5.9 6BT DIESEL(7088 HOURS), GREERRCI 510 LMI, ANTI-TWOBLOCK, 20.5 X 25 TIRES,PROPANE CAB HEATER,30-TON BLOCK, BALL$105,000

2001 TEREX RT230 (30-TON ROUGH TERRAIN)

S/N 2221010, 120’ MAINBOOM, MAIN DRUM(FREE FALL), AUX.DRUM (FREE FALL),CUMMINS DIESEL, EPICCONTROLS, LMI, HYD.EXPANDABLE TRACKS,HYD. DRIVE, COUNTER-WEIGHT REMOVALSYSTEM, B SERIESCOUNTERWEIGHT,CARBODY COUNTER-WEIGHTS, HYDRAULICJOYSTICK CONTROLS,BLOCK$335,000

2000 MANITOWOC 222B (100-TON CRAWLER CRANE)

S/N 223285, 110' MAINBOOM, 56' BI-FOLDSWINGAWAY JIB, MAINWINCH, AUXILIARYWINCH, PATHIRSCHMANN LMI,GROVE DUAL AXISCONTROLS, FULLVISION CAB W/ A/C &HEAT, 29.5 X 25 TIRES,4 X 4 X 4, INDEPEND-ENT REAR STEER,BLOCK, BALL$229,000

2003 GROVE RT760E (60-TON ROUGH TERRAIN)

The Hydraulic Crane Experts

Your Solution for All Cranes912-234-1300 Brian Dooley

[email protected]

EXPERIENCE THE DIFFERENCETakeuchi Excavators provide unmatched performance, power and durability on the toughest jobs. Experience Takeuchi — Visit your local dealer today.

ot jsehguoe thn tootavacxi EhcuekaT

ERIEPEX

hceuka TecenierpxE. sboed pehctamne udivors proI DEH TECNE

lerae dlaoc lrou ysiti V —i

d dnr aewo, pecnamrofreECNREFFE

.yado tler

ytilibrau

Authorized Takeuchi dealer in NC and SC

www.actconstructionequipment.com

1.800.849.5438

Charlotte, NC704.323.7934

Winston-Salem, NC336.397.5000

Wilmington, NC910.254.3525

FIND OUT WHAT OTHERS KNOW. VISIT TAKEUCHI-US.COM TO FIND THE DEALER NEAREST YOU.

o

o

h

l

.

F

S KREHTT OAHT WUD ONIF

HUCEKATT ISI. VWONS K

E DHD TNIO F TOMC.SU-I

.UOT YSERAER NELAEE D

USED EQUIPMENT2011 TB138FR, 286 hours................................$29,9002012 TB250CR, 106 hours ..............................$49,9002014 TB260CR, 143 hours ..............................$55,9002013 TB1140CS, 787 hours............................$107,3872013 TS60V, 79 hours ......................................$31,500



Flint Equipment Companywith 17 full-service branch locations in Alabama, Georgia and South Carolina

Office: 404-691-9445Contact: Darrin Hogeboom

[email protected]: Justin Murray

[email protected]

Your John Deere Dealer Serving Our Customers for 45 Yearswww.flintequipco.com

2007 Hitachi ZX240LC3, Stk F563335, S/N FF01V1Q021296, 4920 Hrs, Cab w/AC,Med. Arm, Standard Boom..........$109,000

2012 John Deere 624K, Stk F567445, S/N1DW624KPTBD640585, 1649 Hrs, Cabw/AC, Quick Coupler ..................$145,000

2006 John Deere 700J LT, Stk F567320,S/N T0700JX127395, 3626 Hrs, Cab w/AC,Lever Steer, Long Track ................$77,000

2006 Hitachi ZX650LC3, Stk F567597, S/NFF01J9Q020076, 6552 Hrs, Cab w/AC,Long Track, Counter Wt Removal$242,000

2013 John Deere 544K, Stk F569882, S/N1DW544KZPCE649811, 372 Hrs, Cabw/AC, 3 Spool, Aux Hydraulics ..$175,000

2010 John Deere 450DLC, Stk F556899,S/N FF450DX913885, 3466 Hrs, Cabw/AC, Med. Arm, Long Track ......$224,500

2007 John Deere 850J LT, Stk F567323,4254 Hrs, Cab w/AC, Lever Steer, LongTrack, Hydrostatic Trans ............$140,000

2009 Hitachi ZX210F-3, Stk F567855, S/NFF00BHF210003, 6889 Hrs, Cab w/AC,Cab Riser, Wide Track ................$165,000

Fuel Efficiency...

Cat 323F L ES ExcavatorBuilt for Extreme Service

The Cat 323F L ES (extreme service)excavator is a specially designed machinewith reinforced structures and massive coun-terweight to take on the most severe applica-tions. The machine delivers 20 percent moreover-the-side lift capacity than its conven-tional 20-ton counterpart and has the stabili-ty to handle the largest of work tools likethumbs and grapples for added versatility,according to the manufacturer.

The heavy-duty boom and extreme serv-ice stick feature high-strength-steel and box-

section construction with internal baffles foradded durability. The massive upper frame,carbody (lower frame) and track rollerframes are designed for long-term strengthand durability.

The F Series machine delivers a 9 percentimprovement in fuel efficiency compared tothe E Series machine, and much of that canbe attributed to the 156 hp (116 kW) C7.1engine — one that meets the strictest U.S.EPA emissions regulations without interrupt-

The 323F L ES’s powerful hydraulic system places major components in proximity;this minimizes piping lengths and reduces frictional losses and pressure drops.

see CAT page 78


Monroe, NC 28112

www.brookssales.com

HoursMon.-Fri. 7:30am-5:00pmSat. 8am-12pm

7

Call Jimmy for Service & Brian for Parts.704-233-4242 • 800-443-75693144 Hwy 74 East • Monroe, NC 28112www.brookssales.com

Mon.-Fri. 7:30am-5:00pmClosed Sat. Dec, Jan, Feb

Brooks Sales for Case Service & Sales

7

4:28 PM

7

The Best Parts & Techniciansfor your Case Skid Steer Loaders & CTL Track

Machines are at Brooks Sales. They are waiting for you.

Call 1.866.643.1010 and use code ADCEGSE or visit www.ClearSpan.com/ADCEGSE and we'll send you a free gift.

fabric structures

SPECIALFINANCING7

RESTRICTIONS APPLY

Y R S

For one year onFabric Structures

ZERO DOWNNO INTEREST

NO PAYMENTS

SPECIAL7

FINANCING

Y

SPECIAL7RESTRICTIONS APPL

NO PAYMENTS

Y R S

NO INTERESTZERO DOWN

Fabric Structures or one year onF

New Locations…

Liebherr Signs NewAgreement With RECOto Expand Partnership

of 2014 and into next year.”Houston-Sugar Land-Baytown, Texas, added the

largest number of construction jobs in the past year(10,900 jobs, 6 percent), followed by Chicago-Joliet-Naperville, Ill. (9,900 jobs, 8 percent), Dallas-Plano-Irving, Texas (9,700 jobs, 8 percent) and BatonRouge, La. (8,000 jobs, 18 percent). The largest per-centage gains occurred in Lake Charles, La. (27 per-cent, 2,900 jobs), Monroe, Mich. (27 percent, 600jobs), Owensboro, Ky. (25 percent, 700 jobs) andCrestview-Fort Walton Beach-Destin, Fla. (24 per-cent, 900 jobs).The largest job losses from August 2013 to August

2014 were in Phoenix-Mesa-Glendale, Ariz. (minus5,000 jobs, minus 5 percent), followed by Bethesda-Rockville-Frederick, Md. (minus 4,000 jobs, minus12 percent), Gary, Ind. (minus 2,800 jobs, minus 15percent) and Edison-New Brunswick, N.J. (minus2,700 jobs, minus 6 percent). The largest percentagedecline for the past year was in Steubenville-Weirton,Ohio-W.V. (minus 17 percent, minus 300 jobs), fol-lowed by Gary, Ind. and Redding, Calif. (minus 13percent, minus 400 jobs).Even as construction spending increased for the

year, it declined 0.8 between July and August, from

$968.8 billion to $961 billion. Both private and publicconstruction spending declined for the month, 0.8 per-cent and 0.9 percent respectively. The month-to-month private sector declines occurred in both resi-dential (0.1 percent down) and nonresidential con-struction (1.4 percent down). Spending on public edu-cation facilities dropped 2.9 percent for the monthwhile investments in highway construction alsodropped by 0.6 percent for the month.Association officials said that the construction

employment and spending data make it clear that theindustry continues its slow and sometimes inconsis-tent recovery from its years-long downturn. They cau-tioned that many firms report having a hard time find-ing enough qualified workers. Indeed, one in fourfirms report having to turn down projects because ofworker shortages.“We want to make sure firms don’t miss out on the

recovery because they don’t have enough workers,”said Stephen E. Sandherr, the association’s chief exec-utive officer. “Ultimately these delays will underminethe recovery by spiking construction costs and delay-ing project schedules.”

(This story also can be found on Construction


Officials Say Industry Continues Recovery From Its Downturn

INDUSTRY from page 1

Liebherr Construction Equipment Co. announced that RECOEquipment Inc., headquarted in Belmont, Ohio, acquired Republic CraneLLC with locations in Charlotte, N.C., and Florence, Ky. In agreementwith Liebherr, these locations will now operate under the full-line Liebherrcontract selling and servicing the earthmoving and material handlingproduct lines. “I am extremely excited about what this means for our customers and

our business,” said Reed Mahany, president, RECO Equipment Inc.“Priority number one is to continue to provide uninterrupted parts, serviceand sales support.”RECO Equipment Inc. was founded in 1983 in Morristown, Ohio. The

company has continued to expand since then and now has 14 locations,employs more than 150 people and deploys a modern service fleet of morethan 60 full-service trucks and 30 support vehicles. RECO EquipmentInc. is an established Liebherr dealer representing the full product line inmultiple locations in Ohio, Pennsylvania and Indiana, since 1994.“As we continue our partnership with RECO Equipment Inc., we look

forward to working to build on our success with this expanded territory,”said Peter Mayr, president, Liebherr Construction Equipment Co.

(This story also can be found on Construction Equipment Guide’s Website at www.constructionequipmentguide.com.)


Lawrence Equipment Inc., a Case ConstructionEquipment dealer, has announced the expansion of the com-pany’s operations with the opening of a new facility inSuffolk, Va. The newest Lawrence Equipment facility (3750 Pruden

Boulevard in Suffolk) encompasses 15,900 total sq. ft.(1,477.1 sq m) and features diagnostic and repair equipment.The new location will serve customers in the HamptonRoads area and will include new and used equipment, rentalservices, heavy haulingand in-shop or over-the-road service. According to David

Hanger, president,Lawrence Equipment, thecontinued growth stemsfrom the company’s long-standing tradition of help-ing customers succeed inthe highly competitiveconstruction industry. “The key to our success

is helping customerswin,” said Hanger. “As100-percent employee-owned, we are devoted toproviding our customerswith our signature highlevel of service. We’reextremely excited aboutour newest location andthe opportunity it represents for our company and customersin the area.”Headquartered in Roanoke, Lawrence Equipment now

operates a total of five dealerships with additional locationsin Ashland, Bridgewater, Suffolk and Waynesboro.Employing a total of 55 people, Lawrence Equipment pro-vides its customers with fast and reliable service throughoutthe Commonwealth of Virginia. Hanger said Lawrence Equipment plans to hire eight new

employees as part of the expansion. Lawrence Equipment was formed in 2002 by Lawrence

Companies Inc., a trucking company founded in 1932 on thebasis of providing excellent customer service. The compa-ny’s product offering includes the full line of Case construc-tion equipment, including backhoe loaders, excavators,motorgraders, wheel loaders, compaction equipment,crawler dozers, skid steer loaders, compact track loaders andrough-terrain forklifts. For more information on Lawrence Equipment, call

540/966-4590 or visit www.lawrenceequipment.net.For more information on Case Construction Equipment,

visit http://www.CaseCE.com.


Serving Hampton Roads…

Lawrence EquipmentExpands Reach With Suffolk, Va., Location

“The key toour success ishelping customerswin.”

David HangerLawrence Equipment

Bomag Appoints May as New Dealer

Territory Manager Jerry Fitch and Bomag Americas Inc.announced May Heavy Equipment is now the authorizedBomag road building equipment distributor in NorthCarolina and the northern two-thirds of South Carolina. MayHeavy Equipment now specializes in the sale, rental andparts and service support of Bomag’s broad road buildingline of milling machines, Cedarapids asphalt pavers, CMIRS and Bomag MPH Series of reclaimer/stabilizers, lightand heavy tandem and combination rollers, and pneumatictired rollers. “This family-owned dealership has built its reputation on

providing customer support, and that makes May HeavyEquipment the perfect partner to provide local sales andservice support for Bomag road building equipment,” saidJohn Hood, director of sales, heavy equipment of BomagAmericas Inc. “May Heavy Equipment is growing and has awell-established customer base throughout its territory thatneed Bomag road building equipment to efficiently completetheir work. This relationship is a perfect match for bothBomag and May Heavy Equipment.” From asphalt paving and compaction to rehabilitation,

May Heavy Equipment is now a one-stop shop for newBomag road building equipment. This includes Cedarapids’sline of commercial and mainline paving equipment alongwith Bomag’s compaction equipment offering, both givingpaving contractors what they need to achieve bonus-levelsmoothness and mats compacted to spec densities, accordingto the companies. The offering includes industry exclusives like the

Cedarapids CR652 remix anti-segregation paver. This paverreblends asphalt at the last stage of the paving process to vir-tually eliminate segregation, and the lineup includes Bomagtandem vibratory rollers equipped with intelligent com-paction system, asphalt manager, to prevent mat over com-paction.For the rehabilitation contractor, the broad line includes a

range of high-performance utility and half-lane milling

machines, offering cutting widths from 11.8 to 98.4 in. (30 to250 cm) with power classes ranging from 125 to 590 hp (92to 440 kW). Regardless of whether the customer needs a machine that

excels in road reclamation or soil stabilization, May HeavyEquipment has the solution in the CMI RS and Bomag MPHSeries of reclaimer/stabilizers that offer power ratings from360 to 950 hp (268 to 730 kW), cutting widths from 96 to120 in. (244 to 305 cm) and depths from 12 to 21 in. (30.5 to53 cm). “Today, Bomag offers the road building contractor much

more than its compaction equipment line,” said RichieAmbrose, vice president of new equipment sales of MayHeavy Equipment. “We are very excited about representing Bomag’s road

building equipment line, as it complements our existingheavy equipment offering for our growing customer basethroughout the Carolinas.” For more information on May Heavy Equipment, call

866/629-3784 or visit www.mayequip.com. For more information on Bomag, call 309/853-3571 or

visit www.bomag.com/us.(This story also can be found on Construction


May Heavy Equipment now carries the BomagCedarapids CR652RX paver.

May Heavy Equipment now carries the Bomag BM1200/30 mill.


Cat D5H LGP, ’88, 4,957 hrs ....................$24,500Komatsu D39PX-22, ’09, 878 hrs ............$89,500Komatsu D51PX-22, ’08, 4,013 hrs ......$124,500Komatsu D61PX-15EO, ‘07, 4,771 hrs ..$120,000Komatsu D65EX-15, ’06, 2,301 hrs........$144,500Komatsu D65EX-15EO, ’07, 3,934 hrs ..$149,500Komatsu D155AX-6, ’07, 6,524 hrs ......$239,500Komatsu D275AX-5, ’03, 23,015 hrs ......$99,500

Broce RJ350, ’00, 3,920 hrs ....................$19,500Roadtec RX700, ’08, 4,630 hrs..............$170,000Wirtgen W60, ’08, 628 hrs ....................$144,900Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000Wirtgen W600, ’03, 2,403 hrs..................$77,500Wirtgen W2100, ’04, 8,373 hrs ..................$CALL

Blaw-Knox PF115, ’08, 1,921 hrs ............$14,500LeeBoy 8500HD, ’04 ................................$24,500LeeBoy 8500LD, ’08, 910 hrs ..................$74,500Vogele 1110WB, ’03, 1,004 hrs ..............$85,000Vogele 5103-2, ’11, 1,273 hrs ..............$250,000Vogele 5203-2, ’09, 2,727 hrs ..............$195,000

Bomag BC61RB, ’00, 15,862 hrs ............$59,900Bomag BC1172RB, ’05, 15,531 hrs ........$99,900Bomag BW205AD, ’02, 3,520 hrs ............$26,500Hamm HD14VV, ’09, 2,460 hrs ................$29,500Hamm HD90 Ozzy, ’04, 4,300 hrs ............$36,500Volvo DD90HF, ’09, 638 hrs ....................$59,500

Komatsu HM300-2, ’06, 6,500 gal ........$275,000Komatsu HM400-2, ’07, 8,000 gal ........$395,000

Komatsu WA65-3, ’04, 745 hrs................$56,500Komatsu WA70-5, ‘06, 2,592 hrs ............$47,500Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500Komatsu WA250-6 High Lift, ’11, 2,086 hrs ..........................................................................$124,500Komatsu WA320-7, ’13, 462 hrs............$174,500Komatsu WA320-7, ’14, 81 hrs..............$165,000Komatsu WA380-6, ’11, 2,094 hrs ........$179,500Komatsu WA380-7, ’13, 1,385 hrs ........$185,000Komatsu WA430-6, ’07, 4,404 hrs ........$134,900Komatsu WA450-6, ’07, 8,069 hrs ........$149,500

Komatsu WA500-3, ’98, 11,556 hrs ........$79,500New Holland LW190B, ’04, 5,908 hrs......$33,500Terex TL300-2, ’08, 2,441 hrs..................$79,500

Kleemann MSD190D Screen, ’13, 688 hrs ............................................................................$255,000Kleemann MC110Z Crusher, ’13, 714 hrs..............................................................................$475,000

Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500Komatsu GD655-3EO, ’09, 1,474 hrs ....$169,500

Norco Puma 220, ’11, 78 hrs ....................$CALLPonsse Cobra HS10, ’98, 20,013 hrs ......$75,000Valmet 415EX/Rolly II, ’05, 10,092 hrs $135,000Valmet 840.2, ’05, 6,600 hrs ................$169,000Valmet 860.4, ’12, 1,640 hrs......................$CALLValmet 911.3, ‘08, 8,655 hrs ................$235,000

Cat 365CL-MH, ‘08, 10,428 hrs ............$154,500Komatsu P400LC-8MH, ’08, 6,095 hrs ..$219,500

Cat 330CL, ’02, 12,032 hrs ......................$69,500Cat 345BL, ’03, 10,750 hrs ......................$72,500Cat 385CL, ’06, 9,646 hrs ..........................$CALLDeere 350DL, ’07, 6,752 hrs..................$124,500Deere 350DLC, ’07, 5,837 hrs ..............$124,500Deere 350DLC, ’07, 6,832 hrs ..............$115,000Deere 590D, ’93 ......................................$24,500Gradall XL4100 III, ’09, 5,191 hrs ........$130,000Kobelco SK400LC Mark IV, ’97 ................$38,500Komatsu PC35MR-2, ‘07, 4,747 hrs ........$26,500Komatsu PC88MR-8, ‘09, 1,195 hrs ........$74,500Komatsu PC138USLC-8, ’11, 1,142 hrs $124,500Komatsu PC138USLC-8, ’11, 3,218 hrs $104,500Komatsu PC160LC-7, ’05, 8,230 hrs........$54,500Komatsu PC200LC-6, ’01, 5,824 hrs........$59,500Komatsu PC200LC-7, ’02, 6,850 hrs........$84,500Komatsu PC200LC-7, ‘03, 8,114 hrs........$79,500Komatsu PC200LC-7, ’03, 5,975 hrs........$89,500Komatsu PC200LC-7, ’03, 6,128 hrs........$69,900Komatsu PC200LC-7, ’04, 7,640 Hrs ......$89,500Komatsu PC200LC-8, ’06, 4,621 hrs........$97,500Komatsu PC220LC-6, ’96, 6,510 hrs........$64,500Komatsu PC220LC-8, ’06, 9,084 hrs........$96,500Komatsu PC220LC-8, ’06, 2,606 hrs......$139,500Komatsu PC220LC-8, ’07, 5,757 hrs......$119,500Komatsu PC220LC-8, ’09, 4,707 hrs......$129,000Komatsu PC228USLC-1, ’99, 4,400 hrs ..$54,500Komatsu PC300LC-7EO, ’06, 6,320 hrs ..$99,500Komatsu PC300LC-7EO, ’06, 7,736 hrs $110,000Komatsu PC360LC-10, ’14, 655 hrs ......$269,500Komatsu PC400LC-7, ’04, 10,300 hrs......$99,500Komatsu PC400LC-7, ’05 8,163 hrs ......$124,500Komatsu PC400LC-7, ’05 11,134 hrs ......$92,500Komatsu PC400LC-7EO, ’07, 3,991 hrs $204,500Komatsu PC400LC-8, ’08, 3,815 hrs......$209,500Komatsu PC450LC-8, ’11, 2,389 hrs......$309,500Komatsu PC600LC-7, ’05, 10,328 hrs....$199,500Komatsu PC600LC-7, ’05, 4,910 hrs......$369,500Komatsu PC600LC-8, ’06, 10,478 hrs....$199,500Komatsu PC650LC-5, ’95, 17,615 hrs......$42,500Komatsu PC750LC-7, ’04, 6,613 hrs......$349,500Volvo EC210BLC, ’04, 13,274 hrs ............$57,500Volvo EC240CLR, ’11, 454 hrs ..............$195,500

DOZERS

PAVING

WHEEL LOADERS

EXCAVATORS

CRUSHING/SCREENING

GRADERS

MATERIAL HANDLERS

FORESTRY

COMPACTION

WATER EQUIPMENT

MILLING

15 Roland Branch Locations in IL, IN, MI, MO, and WI

V

I

S

I

T

R

O

L

A

N

D

M

A

C

H

I

N

E

R

Y.

C

O

MCall Jay Germann (217) 789-7711 • Email: [email protected]

Komatsu D65EX-15, ’06, 2,301 hrs ........$144,500 Komatsu WA250-6, ’11, 5,646 hrs ..........$94,500

Financing Available for Qualified Buyers

Quality Used Equipment...with support to back it up

Broce RJ350, ’00, 3,920 hrs ......................$19,500Vogele 5203-2, ’09, 2,727 hrs ........................$195,000


The $400 million redevelopment of the Daytona International Speedway is movingalong nicely toward its January 2016 completion date.

Racing Schedules Create Unique Challenges for Construction

serves as the design partner.Recently, the main focus has been getting

the 20,000 tons (18,143.7 t) of steel for themain structure and stairs in place, accordingto Len Moser, Barton Malow’s vice presi-dent. “Our focus in terms of schedule and

everything has been getting that steel inplace,” Moser said. “We’ve had probably 12to 15 cranes on site at one time, and we’ll befinishing up sometime in October. Basically,what we’re doing is building behind theexisting grandstands, and then we’re remov-

ing the existing Sprint Tower, which iswhere the suites are and the race operations— that whole building that exists up theretoday, after the 2015 Daytona 500 inFebruary, we’ll demolish that in total in largepieces. We’ll demo that whole tower andrebuild it in place — bigger, stronger andfaster, if you will — before 2016 BudweiserSpeedweeks. So we’ve got about ninemonths of demolish and construct, and thatwill then house the new suites and race oper-ations — all the hospitality functions.”Moser explained that the structures will be

approximately 1,540 ft. (469.4 m) high at themaximum. They will be about the sameheight as the existing Sprint Tower, but willbe longer on each end. The largest trussesspan about 30 ft. (9.1 m), and some of the

anchor bolts are 7 ft. (2.1 m) long and 2.25in. (5.7 cm) in diameter.“When you get an assembly of those bolts

together — a few thousand pounds of justanchor bolts — it’s quite an undertaking toget those set,” Moser said.A large majority of the steel is galvanized.

The steel was fabricated fab shops inGeorgia and Alabama, and most of it wasgalvanized just south of Atlanta.Moser noted that a marshalling yard

known as Lot 10 was used for bringing steelto the cranes for erection. Substantial craneswere needed, more for height and reach thanfor weight, because everything is being donefrom the back of the stands.“We have to go up over that 1,450 feet and

then out — we can’t be on the track, so it’s

mainly about height and reach,” Moser said.“The longest reach on a crane was 200 feet.”He noted that a challenge that they knew

they would have going into the project wasworking around the races.“There’s no postponing the race or racing

somewhere else — the Daytona 500 must goon, plus another six or seven events, too,”Moser said. “So I think a significant chal-lenge was and is — we’ve been through twomajor races now — working around main-taining the operation of the facility whilewe’re building. We’ve done a lot of what’scalled Race Ready preparation, putting in

Recently, the main focus has been get-ting the 20,000 tons (18,143.7 t) ofsteel for the main structure andstairs in place, according to LenMoser, Barton Malow’s vice presi-dent.

Substantial cranes were needed, morefor height and reach than for weight,because everything is being donefrom the back of the stands.

see DAYTONA page 82

DAYTONA from page 1


The AEM/AEMP Draft Telematics API (application pro-gramming interface) Standard is now available to end-users, including contractors, fleet managers, rental man-agers and dealers/distributors, as well as OEMs, systemsmanagement firms and other interested construction/indus-trial and related industry professionals. This new industrywide draft standard provides end-users

with more OEM equipment data and more convenientaccess, which allows them to better manage and analyzeinformation across their fleets, and helps them save timeand money on the job site or within their operations. The standard is a collaborative effort of the Association

of Equipment Manufacturers (AEM) and the Associationof Equipment Management Professionals (AEMP), work-ing on behalf of their members and the industry. To achieve a globally recognized standard for conform-

ity worldwide, the AEM/AEMP Draft Telematics APIStandard will be submitted for acceptance by theInternational Organization for Standardization (ISO).

Expanded Equipment Data, One Program to Manage Mixed Fleets

The AEM/AEMP Draft Telematics API Standardexpands the original AEMP Telematics Standard to include19 data fields (with fault code capability).The Draft API standard also changes how the data is

accessed: via an application programming interface (API)with standardized server-to-server communication proto-cols, so end users with mixed equipment fleets can use their

own business systems and software without the need towork across multiple telematics provider applications.The Draft API standard’s secure internet protocol allows

for manufacturer protection of proprietary information; dis-closure to third-party companies for the purpose of aggre-gation is not permitted.

Must Sign Up Online to Receive Draft API Standard

While access to the AEM/AEMP Draft Telematics APIStandard is free, industry professionals must sign up direct-

ly via the AEM or AEMP Web sites to be sent the draftstandard and to receive any future updates or additionaldocumentation. AEMP and AEM also encourage participation in the API

developer group to ask questions and receive any clarifica-tion that is needed. Request access here:https://groups.google.com/d/forum/telematics-standard.The associations caution that while they are making the

draft standard available now to help companies becomefamiliar with its contents for business planning purposes,the document is still a work in progress. Final language isdependent upon completion of the ISO acceptance process.More information is available on the AEM and AEMP Websites - http://www.aem.org/SRT/Technical/Telematics/ orhttp://www.aemp.org/draft-api/.

Up Next: Cranes, Mobile Elevating WorkPlatforms and Air Compressors

Currently telematics data related to crane operations aswell as other niche products are excluded from the DraftAPI standard. Next steps include working on inclusion ofcrane data fields, followed by mobile elevating work plat-forms and air compressors. Also, the Draft API standardhas not had ag equipment input and therefore cannot beconsidered an ag equipment-utilized draft standard at thispoint. AEM is evaluating next steps from an ag sector per-spective.

(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)

To achieve a globally recognizedstandard for conformity worldwide, the AEM/AEMP DraftTelematics API Standard will besubmitted for acceptance by theInternational Organization forStandardization (ISO).

AEM/AEMP Draft Telematics API Standard Now Available


‘Show Your Support’ to Raise Funds for Lone Survior Foundation

Gayle Humphries, CFO of JCB of Georgia, presents alucky prizewinner, Cliff Peeler, HathawayConstruction, Atlanta, Ga., with a $100 Bass Pro Shopsgift card.

Neil Smith, Donnie Wyld and Spencer Howard, all ofthe JCB Dancing Digger team, entertained the crowdthroughout the day.

JCB corporate donated $25 to the Lone Survivor Foundation for every signature on the ban-ner displayed at the event. First signatures came from JCB of Georgia’s Tony Reardon (L)and Gayle Humphries.

David Tuttle, Triplett Enterprises, Rincon, Ga., operating a JCB 3CX andtakes a shot at the top time in the backhoe rodeo event.

Brett (L) and Perry Mincey (R), Clifton Construction,Savannah, Ga., and Chris Shea, JCB of Georgia salesrepresentative, discuss the construction market in theLow Country.

Maurice Bland, Bland Grading, Savannah, Ga., operates a JCB 8035 ZTSin the mini-excavator portion of the equipment rodeo.

JCB of Georgia’s tailgate party and fundraiser in Pooler, Ga., for the Lone Survivor Foundationon Sept. 26 provided an opportunity to see JCB’s hero of the battlefield and the new JCB hero ofthe work.JCB from page 22


THE BEAST BRINGS EVERYTHINGYOU NEED TO GET THE JOB DONE.Tame your toughest jobs with the raw power of KOBELCO excavators. With features like an exclusive independent travel system, operator controlled power boost and a heavy-duty cooling system, you can count on KOBELCO to get more done in less time. Plus, premier operator comforts and industry leading visibility mean you’ll actually enjoy operating these machines.

KOBELCO-USA.COM

Up to 84 months of full machine coverage.

PROTECTIO

N P

LA

N

PREMIU

M


More Than 200 Guests Attend Event, Look Over Lineup

David Biggs (L) and Derrisck Outen, both of OutenEarthworks in Jefferson, S.C., look over the Komatsuwheel loaders.

(L-R): Bill Cross and Chris Wilkes, both of LinderIndustrial Machinery, talk about hybrid Komatsuexcavators with Gregg Antemann and Kristin Doeblerboth of Carolina Wetland Services in Charlotte.

Bill Chaney (L) of Midland Machinery Company goesover the Midland product offerings with Gaylor Rattzof Blythe Brothers Asphalt in Charlotte, N.C.

Beth, Anisa and Cole welcome Scott Curry with VulcanMaterials.

(L-R): Todd Bangert and John Grant, both of PalmettoRecycling / Morris Scrap Metal, ask Bill Cross andMichael Moore, both of Linder Industrial Machinery,and Justin Palvere of Genesis questions about the pro-duction of the Genesis products.

(L-R): Jay Hutcheson and Jim Yarbrough, both ofYarbrough Transfer in Winston-Salem, N.C., go over afew logistical items with Cameron Waugh of LinderIndustrial Machinery.

(L-R): Freddie English of Lane Construction won theGamecock gift bag donated by Franks Quality Servicesin Columbia, S.C., and stands with Melanie Brown ofFranks Quality Services and Linder IndustrialMachinery President John Coughlin.

John Grant (C) of Palmetto Recycling/Morris Scrapwas the lucky door prize winner of a 42 in. LG televi-sion from Paladin Brands & Allen Perko. JohnCoughlin (R), president of Linder IndustrialMachinery congratulates Grant.

see OKTOBERFEST page 82

OKTOBERFEST from page 14


Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50 Scale....$85

Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale ..............$85

Allis-Chalmers Yellow HD21 Dozer w/Ripper, 1:50 Scale .......... $85

Bobcat E35 Compact Excavator, 1:25 Scale ................................$50

Bobcat E55 Compact Excavator, 1:25 Scale ................................$60

Bobcat M400 Gold Skid Steer Loader, Scale 1:25 ......................$25

Bobcat S175 Skid Steer Loader, 1:25 Scale ..................................$65





Bobcat T550 Track Loader, 1:25 Scale............................................$70

Bobcat T770 Compact Track Loader, 1:25 Scale..........................$45

Bobcat 225 Compact Excavator, 1:25 Scale..................................$50

Case CX250C Excavator, 1:50 Scale ............................................$195

Case 95XT Skid Steer Loader (Conrad), 1:32 Scale ....................$60

Case 580 ST Backhoe/Loader, 1:50 Scale ....................................$95

Case 1102 Vibromax Roller, 1:35 Scale ........................................$100

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

1:50 Scale ..........................................................................................$100

Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$110

Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale..................$65

Caterpillar D6K Track-Type Tractor, 1:50 Scale ............................$65

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$90

Caterpillar D8L Track-Type Tractor (NZG 233), 1:50 Scale..........$75

Caterpillar D8T Track-Type Tractor, 1:50 Scale............................$110

Caterpillar D9N Track-Type Tractor (NZG 298), 1:50 Scale ........$75

Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185

Caterpillar D10T Track-Type Tractor, 1:50 Scale ........................$100

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$150

Caterpillar 323D L Excavator, 1:50 Scale........................................$90

Caterpillar 336D L Excavator, 1:50 Scale........................................$95

Caterpillar D350D Articulated Dump Truck, 1:50 Scale ..............$50

Caterpillar 365B L Series II Excavator, 1:50 Scale........................$75

Caterpillar 416B Backhoe/Loader (NZG 285), 1:50 Scale............$70

Caterpillar 428 Backhoe/Loader (NZG 2851), 1:50 Scale ............$70

Caterpillar 740B EJ Articulated Dump Truck w/ Ejector Body, 1:50

Scale......................................................................................................$70

Caterpillar 963D Track Loader, 1:50 Scale ....................................$60

Caterpillar 966K Wheel Loader, 1:50 Scale....................................$95

Caterpillar 977 Traxcavator, 1:50 Scale ..........................................$60

Caterpillar 988K w/ Grapple, 1:50 Scale ......................................$160

Demag Tracked Paver (NZG), 1:50 Scale ......................................$75

Doosan Moxy MT31 Articulated Truck ........................................$100

Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$150

Grove TM1500 White 12 Axle Truck Crane, 1:50 Scale ............$160

Hamm 3307 Compact Roller, 1:34 Scale ........................................$45

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90

International 175 Crawler Loader, 4in1, 1:50 Scale ......................$65

International 433 Dual Engine Pay Scraper, 1:25 Scale ............$225

International 560 Pay Loader, 1:25 Scale ....................................$145

International TD-15 Dozer w/Umbrella, 1:50 Scale ......................$60

International TD-20E Dozer, 1:64 Scale ..........................................$24

International TD-25 Dozer w/Ripper, 1:25 Scale..........................$180

JCB 3CX Backhoe/Loader, 1:50 Scale............................................$75

John Deere “BO” Lindeman Crawler Tractor, 1:16 Scale ..........$70

John Deere 200C LC Excavator, 1:50 Scale ..................................$45

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$45

John Deere 624J Military Wheel Loader, 1:50 Scale....................$40

John Deere 772CH Motor Grader, 1:50 Scale................................$45

John Deere 959K Track Feller Buncher, 1:50 Scale ....................$90

Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45

Komatsu D51 EX Dozer, 1:50 Scale ................................................$85

Komatsu D65 EX-17 Dozer w/Ripper 1:50 Scale ..........................$80

Komatsu D65PX-17 Dozer, 1:50 Scale ............................................$80

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95

Komatsu D375A Dozer, 1:50 Scale................................................$125

Komatsu D475A Dozer w/ripper, 1:50 Scale................................$160

Komatsu GD655 Motor Grader, 1:50 Scale....................................$90

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........................$80

Komatsu HM250 Articulated Dump Truck, 1:50 Scale ................$75

Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100

Komatsu PC200 Excavator, 1:50 Scale ..........................$160

Komatsu PC490LC-10 Excavator, 1:50 Scale ................ $175

Komatsu WA470-7 Wheel Loader, 1:50 Scale ..............................$75

Komatsu WA500 Wheel Loader, 1:50 Scale ..................................$80

Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75

Komatsu WH613 Telehandler, 1:50 Scale ......................................$65

Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..........$90

Leeboy 785 Motor Grader, 1:64 Scale ............................................$90

Leeboy 8816 Asphalt Paver, 1:50 Scale..........................................$90

Liebherr R916 Litronic Excavator, 1:50 Scale ............................$150

Link Belt 800 X2 Excavator, 1:50 Scale ........................................$200

Poclain TC45 Excavator, 1:50 Scale..............................................$140

Vogele 1900-2 Tracked Paver, 1:50 Scale........................$140

Vogele MT3000 Powerfeeder, 1:50 Scale ....................................$140

Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........................$115

Volvo EC220D Excavator, 1:50 Scale............................................$115

Volvo L220G Wheel Loader, 1:50 Scale........................................$120

Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale............................$90

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$145

Shipping and Handling Included

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar D7E Track-Type Tractor, 1:50 Scale - $90 International TD-14 Crawler Dozer, 1:16 Scale - $150

Ox Bodies Stampede ultralight (UL) series dumpbody is well-suited for a range of applications fromsand-to-small aggregates and asphalt.A lightweight, elliptical dump body is combinedwith traditional Stampede long-term reliabilityand durability. The Stampede ultralight isdesigned for maximizing payload capacity and

reducing operating costs in low-wear pay-load conditions. Average dump body

weight reduction is approximately 20 percentover the Ox Bodies’ similarly configured, heav-ier-duty Stampede HD version, according to the

manufacturer. The dump body features widths of 96 and 102 in.

(244 and 259 cm), side heights of 36 to 46 in. (91 to 117cm), lengths of 10 to 21 ft. (3 to 6.4 m) and capacitiesfrom 6.9 to 19.0 cu. yds. (52.7 to 14.5 cu m). In addi-tion to a wide range of high-end features, numerousproduct-enhancing upgrades also are available. For more information, call 800/844-2519 or visit

www.oxbodies.com.(This story also can be found on Construction


Pages 42-46To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

SECT IONTrucks & Trailers

XL Trailers Showcases XL 110 Low-Profile HDG Trailer Ideal for hauling

heavy constructionequipment, the XL 110low-profile hydraulicdetachable gooseneck(HDG) trailer’s 13-ft.(3.9 m) long low-profileneck saves weight,allowing the truck plentyof clearance to attach,and has a five positionvariable ride height. TheXL 110 low-profile HDGtrailer features an overalllength of 53 ft. (16 m)with an overall width of102 in. (259 cm), and israted at 110,000 lbs.(49,895 kg) capacityoverall and 100,000 lbs.(45,359 kg) in 10-ft. (3m) concentrated, for anefficient and versatiletrailer on the road. To hold up from years

of loading and unloading and keeptracks from slipping, the trailer hasapitong decking — a wood muchstronger than oak. Featuring a 26-ft. (7.9 m) long main deck beforethe 32-degree approach, it includes80K web and T1 flange steel, 13chain slots and seven bent D-ringson each side, as well as heavy-duty

removable swing-out outriggersfor hauling extra-wide loads. Theloaded deck has a height of 8 in.(20 cm) with a 24-in. (61 cm)ground clearance — a model witha height of 18 in. (45.7 cm) with a6-in. (15 cm) ground clearancealso is available for the XL 110low-profile HDG trailer.

The rear bridge is 14 ft. (4.2 m)long with a 40-in. (101.6 cm)loaded deck height. To haul equip-ment on the rear bridge, the XL110 is equipped with bolster chainslots and comes with the option ofbolt-on load-bearing wheel coversfor hauling loads on top of thecover or semi-load-bearing wheel

covers to drive equipment onto thebolsters. The bolt-on feature allowsusers to remove and attach them asneeded. Equipped with a deep well that

is specifically designed for longbooms, the trailer eliminates theneed to detach the lower boom sec-tion on a scraper. The deep bucket

well in the rear bridgeeasily accommodatesexcavators and the low-ered rear angle fromdeck to wheel areaallows for easier loadingof equipment over therear deck. The XL 110low-profile HDG fea-tures three 25,000-lb.(11,340 kg) minimalaxles on the rear bridge,spaced at 54.5 in. (138cm) apart (XL alsooffers 60-in. [152 cm]axle spacing). “There have been

several customizedadvancements in the XL110 low-profile HDGtrailer, including numer-ous tie down options,”said Rodney Crim,director of sales at XLSpecialized Trailers.

“This trailer has quickly gained areputation as the go-to constructionequipment hauler. For more information, visit

xlspecializedtrailer.com.(This story also can be found on

Construction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

The XL 110 low-profile HDG trailer features an overall length of 53 ft. (16 m) with an overall width of 102 in. (259 cm),and is rated at 110,000 lbs. (49,895 kg) capacity overall and 100,000 lbs. (45,359 kg) in 10-ft. (3 m) concentrated.

Ox Bodies Unveils Stampede Ultralight

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • October 15, 2014 •

Subscribe toCEG today...

Get an edge on your competition!Construction Equipment Guide Northeast Edition subscribers are the bestinformed about construction news, construction equipment, sales, auctions,equipment prices, trends and changes in the industry and activities of its people.Call Toll Free! We now accept Visa, Mastercard & American Express!

SUBSCRIPTIONS:

470 Maryland Dr. • Ft. Washington, PA 19034Email: [email protected]

TOLL FREE 1-800/523-2200FAX 215/885-2910

CARDMEMBER’S NAME _________________________________________________________

COMPANY NAME _______________________________________________________________

STREET____________________________________ PHONE NO. ________________________

CITY ______________________________________STATE _______ ZIP ________________

TYPE OF BUSINESS _____________________________________________________________

Check Enclosed VISA MASTERCARD American Express

CARD NUMBER

EXP. DATE(Mo./Yr.)

SIGNATURE OF AUTHORIZED CARDHOLDER

One Year $65(within United States & Puerto Rico Only)

®

LB’s Trailer Sales2904 Harmony HighwayHarmony, NC 28634

(704) 546-2231

Bobcat of Charleston(843) 725-6330(800) 220-6266

Bobcat of Columbia(803) 933-9996(800) 220-6266

Bobcat of Spartanburg(864) 342-9003(800) 220-6266

Bobcat of Savannah(912) 236-5538

www.bobcatops.com

• October 15, 2014 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Construction Equipment Guide • Truck & Trailer Section • www.constructionequipmentguide.com • October 15, 2014 •

TIGER EQUIPMENTwww.tigerequipment.com

RING POWER CORP.500 World Commerce Parkway

St. Augustine, FL 32092904-494-7631

www.ringpower.com

Brooksville352-797-9500

Daytona Beach386-947-4939

Jacksonville904-714-3517

Lake City386-755-3997

Lakeland863-606-0512

Ocala352-620-0660

Orlando407-856-4851

Palm Bay321-725-6420

Sarasota941-359-6050

Tallahassee850-514-1958

Tampa813-671-3200

Tarpon Springs727-938-1613

4181 New Bern HwyJacksonville, NC 28546

910-346-1932

805 Old Roberts RdBenson, NC 27504

919-989-0066

• October 15, 2014 • www.constructionequipmentguide.com • Truck & Trailer Section • Construction Equipment Guide

Hendrickson Introduces Global Version of HAULMAAXHendrickson Truck Commercial Vehicle Systems

has launched a global version of the HAULMAAXrear suspension system. Offered in a 21-ton (19 t) capacity, the global

HAULMAAX was designed specifically for thoseapplications where light weight, durability anddriver comfort are essential. Through its design,higher strength materials and advanced manufac-turing methods, HAULMAAX’s weight is greatlyreduced. Proven with extensive vehicle durabilityand laboratory testing, HAULMAAX delivers thereliability, quality and low maintenance customershave come to expect from Hendrickson,according to the manufacturer. In addition, HAULMAAX utilizes

elastomeric bolster springs and a pro-gressive load spring (PLS) that work insynergy to provide improved ride quality whenthe truck is empty. As payload increases, the PLS fur-ther engages and functions together with the elastomeric bol-ster springs as they compress to provide the additional sta-bility vocational applications need. HAULMAAX addresses the lower-end capacity ranges of

the global truck market and rounds out Hendrickson’s port-folio of elastomeric solutions that have been introduced overthe last four years. In 2010, Hendrickson introduced theHUV vocational rear suspension system at 27 ton (24.5 t) toaddress the global mid-range capacity market. In 2013,

Hendr icksonintroduced ULTI-MAAX to serve not onlythe mid-range capacities butalso the more extreme, highercapacities with 27 to 37 ton (24.5

to 33.5 t) and 40 to 48 ton (36 to 43.5 t) solutions respec-tively.Both HUV and ULTIMAAX are characterized

by designs that provide durability and weight sav-ings for increased payload compared to traditionalsuspension designs. Both also carry a distinct elas-tomeric spring design that not only helps provide anideal balance of empty ride quality and loaded sta-bility, but also protects the chassis, cargo and bodyequipment from excessive vibration and road shock

due to potholes and other road inconsistencies. “HUV and ULTIMAAX addressed the needs of

specific customer segments, and raised the barfor durability and performance forheavy truck suspensions across theglobe,” said Matt Joy vice presi-dent and general manager ofHendrickson Truck CommercialVehicle Systems. “With the launch

of HAULMAAX, we’re rounding out ouroffering of superior elastomeric solutions

which continue to provide innovative ride solu-tions to advance the global commercial transporta-

tion industry.”For more information, call 630/910-2800 or visit

www.hendrickson-intl.com.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

Theglobal HAUL-

MAAX was designedspecifically for those applica-

tions where light weight, dura-bility and driver comfort are

essential.


RISH EQUIPMENT COMPANYwww.rish.com

Bluefield, WV • 304/327-5124Chesapeake, VA • 757/485-2100

Chester, VA • 804/748-6411Coeburn, VA • 276/395-6901

Opal, VA • 540/439-0668Salem, VA • 540/380-2090

Staunton, VA • 540/887-8291

POWER EQUIPMENTwww.powerequipco.com

Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900

Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283

LINDER INDUSTRIALMACHINERY

www.linderco.com

www.facebook.com/linderindustrialmachinery

FloridaFt. Myers • 239/337-1313

Jacksonville • 904/786-6710Ocala • 352/629-7585

Orlando • 407/849-6560Pembroke Pines • 954/433-2800

Plant City • 813/754-2727West Palm Beach • 561/863-0570

North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030

Wilmington • 910/254-2031

South CarolinaColumbia • 803/794-6150

Greer • 864/877-8962North Charleston • 843/552-0095

TRACTOR & EQUIPMENTCOMPANY

www.tractor-equipment.com

AlabamaAlabaster • 205/621-2489Anniston • 256/831-2440

Birmingham • 205/591-2131Decatur • 256/355-0305Dothan • 334/678-1832Mobile • 251/457-8991

Montgomery • 334/288-6580Shoals Area • 256/383-5666Tuscaloosa • 205/752-0621

FloridaPanama City • 850/763-4654Pensacola • 850/505-0550

GeorgiaAlbany • 229/435-0982Atlanta • 404-366-0693Augusta • 706/798-7777Calhoun • 706/879-6200

Columbus • 706/562-1801Hoschton • 706/654-9850Kennesaw • 678/354-5533

Macon • 478/745-6891Savannah • 912/330-7500

find us on

From Komatsu - The Excavator Experts

Efficient Komatsu Tier 4 Interim engine and advanced hydraulic system maximize productivity while providing up to 5% lower fuel consumption.Increased lift capacity with a larger machine design and a reinforced undercarriageKomatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.

The Komatsu PC490LC-10 provides more power, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs.

PC490LC-10

www.komatsuamerica.com

.komatsuamerica.comwww

.komatsuamerica.com


Bobcat Company Names Winners of Million Loaders ContestA second-generation Bobcat compact

equipment owner received the surprise of hislife by being honored with a special editionone-millionth Bobcat T650 compact trackloader during Bobcat Company’s“Unstoppable” campaign and MillionLoaders Celebration contest. Steven Klumker, of Mancos, Colo., visit-

ed the Bobcat of Durango equipment dealer-ship thinking he was being interviewed as afinalist for the contest. Instead, he was hand-ed over the grand prize with his family onhand to celebrate with him. “This is a dream come true for me —

Bobcat machines have been our family’slivelihood and our lifestyle my entire life,”Klumker said after the “reveal.” “And I can-not wait to show this loader off.”Klumker’s entry was selected from more

than 12,000 that came in over six months,based on his answer to the question, “Howdoes Bobcat make you unstoppable?”“Steve’s was exactly the type of entry we

were looking for,” said Gary Hornbacher,Bobcat Company vice president of sales andmarketing. “He described how Bobcatequipment has helped his entire family —first- and second-generation Bobcat equip-ment owners — build a successful businessthat spans more than 40 years and has cov-ered six states. He and his family were earlybelievers in Bobcat machines, and Steve is agreat example of how a customer can beunstoppable with the right equipment and asolid relationship with his local dealer.”Klumker has used a variety of Bobcat skid

steer loaders, compact track loaders, com-pact excavators and attachments in countlessapplications, from a $300 million desertresort and golf club to a 36-year-long, five-phase housing development project. Hiswork has included building lagoons andswimming pools, backfilling utility trenchesand landscaping and tree planting acrossCalifornia, Nevada, Arizona, Colorado, Utahand New Mexico. For more than 40 years,the Klumkers have been customers ofBobcat of Durango, in Durango, Colo., andBingham Equipment in Arizona.

Additional Contest WinnersThe contest’s second prize went to Troy

Hieb, of Newcastle, Wyo., who will receive$1,000 in merchandise credit to spend at anyauthorized Bobcat dealer location. Hieb, a lieutenant with the Newcastle

Volunteer Fire Department, currently owns aBobcat T180 compact track loader, which— most notably — was used to help movedebris during a home fire.“The use of my Bobcat T180 allowed the

Newcastle Volunteer Fire Department tosafely, quickly and fully extinguish a fire thatcould have caused far more damage to thehome if not completely extinguished,” Hieb

wrote in his entry. “Bobcat has built a toolthat has made me unstoppable.”Fifteen third-place winners will receive

Bobcat jackets for telling their stories. Theyare:Robert H. Adair; Hadley, Mass.Jason Benedict; Pipe Creek, TexasEric Boyd; Power, Mont.Dave Chapin; Lincoln, Neb.Gonzalo Corvera; High Ridge, Mo.Gary Dominick; Corfu, N.Y.Josh Gaugler; Belgrade, Mont.Ryan Geiger; Columbia City, Ind.Dennis Del Grosso; Saranac, N.Y.James Kaufman; Anderson, S.C.John Kurtz; Scarborough, OntarioRandall Morgan; Hampton, Minn.Perry Lambright; Clearbrook, Minn.Rick Sherman; Montrose, Colo.Christy Webber; Chicago, Ill.The “Unstoppable” campaign started in

January, marking Bobcat Company’s year-long celebration of the production of its onemillionth loader. Contest entrants werejudged on individual completeness and cre-ativity.All winning contest entries, along with

weekly and monthly winners, can be viewedonline at bobcat.com/million.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Steve Klumker with his new special edition one-millionth Bobcat T650 compacttrack loader.

Steve Klumker (4th from L) with his family, after finding out that he was the winner of the Million Loaders Celebration contest.


AIR COMPRESSORSALESGEORGIA

5490 Thomaston RoadMacon

(478) 474-8460

PINNACLE CENTRAL

COMPANY, INC. www.pinnaclecentral.com

FLORIDA

103 Bryan StreetJacksonville

(904) 354-5746

Polk City(888) 253-2444

ASC CONSTRUCTION EQUIPMENTNORTH CAROLINA

11425 Reames RdCharlotte

(704) 596-8283

Asheville(828) 687-0620

Raleigh(919) 661-8710

Greenville(252) 754-5280

GEORGIA

Savannah (912) 964-8079

SOUTH CAROLINA

Columbia(803) 791-0740

Piedmont(864) 704-1060

North Charleston(843) 414-1120

TENNESSEE

Knoxville (865) 525-1845

Chattanooga(866) 495-3406

BLANCHARD MACHINERY, INC.

www.blanchardmachinery.net

FLORIDA

1890 NE 150th St.Miami

(305) 949-2581Fax: (305) 949-0747

Miami(305) 232-2255

West Palm Beach(561) 833-4634

JWH EQUIPMENT

www.jwhequipment.com

MISSISSIPPI

1101 Hwy. 80 WestJackson, MS 39204(601) 974-8090

COWIN EQUIPMENTALABAMA

2238 Pinson Valley ParkwayBirmingham

(205) 841-6666

Mobile(251) 633-4020

Montgomery(334) 262-6642

Huntsville(256) 350-0006

Oxford(256) 832-5053

FLORIDA

Pensacola(850) 479-3004

GEORGIA

Atlanta(404) 696-7210

• October 15, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 15, 2014 • Page 51

Link-Belt® Spin Ace® Excavators are packed with all the power, productivity,

Extended service intervals

Model # Operating Weight Net hp @ rpm Tail Swing

*75 X3 and 80 X3 engines are Final Tier 4

CCS EQUIPMENT SALESwww.ccsequipment.comRaleigh Durham877-469-3471

LINK-BELT MID ATLANTICwww.link-beltmidatlantic.com

Ashland, VA866-955-6071Chesapeake, VA800-342-3248

QUEST CONSTRUCTIONEQUIPMENT, LLCwww.questequip.com10561 Airline Hwy.St. Rose, LA 70087504-467-7663

Fax: 504-467-3722

Gonzales, LA225-450-6425

Lake Charles, LA337-436-7726

CROSBY EQUIPMENT COMPANY, INC.

www.crosbyequipmentco.com1826 South Peterson Avenue

Douglas, GA 31535912-384-4664

631 Electric AvenueSwainsboro, GA 30401

478-237-8372

HEAVY MACHINES, INC.www.heavymachinesinc.com3930 East Raines RoadMemphis, TN 38118800-432-8902

5200 Hollywood Ave.Shreveport, LA 71109800-548-3458

364 Bob Jobe Rd.Gray, TN 37615855-201-7453

10110 Roberts WayCovington, GA 30014770-788-0888

BENNETT EQUIPMENT & SUPPLY

www.bennettequipment.net1403 Piedmont Hwy.Piedmont, SC 29673864-277-7272

MID SOUTH MACHINERY, INC.3233 Highway 80 WestJackson, MS 39204601-948-6740

3145 Cliff Gookin Blvd.Tupelo, MS 38801662-690-6553

14336 Seaway RoadGulfport, MS 39503228-867-1555

NEW LOCATION

• October 15, 2014 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 15, 2014 •

Link-Belt® Spin Ace® Excavators are packed with all the power, productivity,

Extended service intervals

Model # Operating Weight Net hp @ rpm Tail Swing

*75 X3 and 80 X3 engines are Final Tier 4

CCS EQUIPMENT SALESwww.ccsequipment.comRaleigh Durham877-469-3471

LINK-BELT MID ATLANTICwww.link-beltmidatlantic.com

Ashland, VA866-955-6071Chesapeake, VA800-342-3248

QUEST CONSTRUCTIONEQUIPMENT, LLCwww.questequip.com10561 Airline Hwy.St. Rose, LA 70087504-467-7663

Fax: 504-467-3722

Gonzales, LA225-450-6425

Lake Charles, LA337-436-7726

CROSBY EQUIPMENT COMPANY, INC.

www.crosbyequipmentco.com1826 South Peterson Avenue

Douglas, GA 31535912-384-4664

631 Electric AvenueSwainsboro, GA 30401

478-237-8372

HEAVY MACHINES, INC.www.heavymachinesinc.com3930 East Raines RoadMemphis, TN 38118800-432-8902

5200 Hollywood Ave.Shreveport, LA 71109800-548-3458

364 Bob Jobe Rd.Gray, TN 37615855-201-7453

10110 Roberts WayCovington, GA 30014770-788-0888

BENNETT EQUIPMENT & SUPPLY

www.bennettequipment.net1403 Piedmont Hwy.Piedmont, SC 29673864-277-7272

MID SOUTH MACHINERY, INC.3233 Highway 80 WestJackson, MS 39204601-948-6740

3145 Cliff Gookin Blvd.Tupelo, MS 38801662-690-6553

14336 Seaway RoadGulfport, MS 39503228-867-1555

NEW LOCATION

Komatsu America Corp.’s high capacity C144 harvestinghead is the second model in its new C-series family of“carry-style” heads (the C93 was the first). Weighing 3,086lbs. (1,400 kg), the high performance C144 has a recom-mended DBH working range of 8 in. (20 cm) to 20 in. (50cm) diameter and has a 28 in. (71 cm) maximum cuttingdiameter. It is available installed on Komatsu 931.1 and941.1 harvesters, and can be installed on other carriers as aloose head.The C144 features a new robust frame design for

improved durability and reliability, and a newswing damping system for more responsive headcontrol. The 40 degree rearward tilt angle providesfast feeding performance and reduces head framestress when harvesting and/or reaching on downhillslopes. The feed system is completely new utilizingfour hydraulic motors and four driven rollers. Thestandard single belly roller is now supplemented byan additional feed roller located in the feed path.The addition of the second roller ensures more con-tact with the stem, creating feeding force of up to6,654 ft. lb. (29.6 kN). With a maximum feed speedup to 16.4 ft./sec. (5 m/sec), operators can handlemore difficult trees and limbs. The feed rollerhydraulic circuit has a differential function toensure that stem feeding will continue even if onefeed roller does not have a full grip on the stem,according to the manufacturer.The C144 is equipped with two upper and two

lower hydraulically controlled delimbing knives,and a fixed vertical top knife. The upper knives are

specially designed to handle trees with tough limbs, such aslodgepole pine. The leading right upper knife has a rampedcutting edge to assist in cutting larger branches.The new Constant Cut saw control system features a 32.5

in. (82.5 cm) saw bar that includes a new 19cc saw motorwith an integrated valve to deliver precise control of sawhydraulic flow and pressure. This continuous managementof flow and pressure allows the chain speed to be maintained

at a constant 130 ft./sec. (40 m/sec) throughout the entire cut-ting cycle. This Constant Cut system, along with automaticchain tensioning and automatic EcoOiler chain oiling resultsin:• Faster cutting performance• Reduced fuel consumption• Reduced chance of splitting and/or cracking• Reduced saw maintenance

• Longer saw motor life.Optional stump treatment and color marking

systems are available to meet specific customerneeds.Komatsu’s new MaxiXplorer 3.1 head control

system is standard and provides a flexible and user-friendly control and monitoring system. Wheninstalled on a Komatsu harvester, it is a completesystem for machine control, head control, crosscut-ting and administration. Machine productivity isoptimized by controlling everything from the headto the crane, cab leveling, transmission and ladders.All grease servicing points, bar oil and color

marking tank fill points are accessible from oneposition when the head is parked on the ground.Electrical circuits are identified by numerical tags,and all solenoids have LED indicator lights identi-fying when power is at the solenoid.For more information, visit www.komatsufor-

est.us.(This story also can be found on Construction

Equipment Guide’s Web site at www.construc-tionequipmentguide.com.)

Komatsu Launches New C144 Harvesting Head

The Recycling Association of North Carolina (RANC) presented a $5,000 check to theNCACP board of directors in Wilmington on July 21. This initial check was presented toestablish the NCACP Police Officer’s Assistance Fund — sponsored by the RANC. TheRANC board of directors made the decision to support this new program that will assist offi-cers and/or their families when an urgent need arises.On behalf of the thousands of North Carolina police officers, the NCACP thanked the

members of the RANC for their generosity and support of the men and women who serveand protect their communities every day. Sir Winston Churchill said, “We make a living by what we get, but we make a life by what

we give.”(This story also can be found on Construction Equipment Guide’s Web site at

www.constructionequipmentguide.com.)

RANC Presents $5,000 Donationto the NCACP Board of Directors

(L-R): George Erwin, executive director of NCACP; Travis Ward, president ofRANC; Chief Tom Adkins, president of NCACP; and Rob Jordan, BOD memberRANC.

Pages 53-65

Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Weighing 3,086 lbs. (1,400 kg), the high performance C144 has a recom-mended DBH working range of 8 in. (20 cm) to 20 in. (50 cm) diameterand has a 28 in. (71 cm) maximum cutting diameter.

• October 15, 2014 • www.constructionequipmentguide.com • Crushing, Screening & Recycling Section • Construction Equipment Guide

Purpose-builtfrom the ground up byMaterial handlers from SENNEBOGEN – 44,000 lbs. to 750,000 lbs.

Simple design… Lift more. Move faster. Save fuel. Run longer. , 0 0 0 44 . , l0 0 0 0 75 7 o ts b l .sbl

S i m p l e d e

e s i g n … L i ft ft mor

re . Mov e faster.

. Sa v e f u e l . Ru n

n longer.

Alabaster, AL205-621-2489Anniston, AL

256-831-2440Birmingham, AL205-591-2131Decatur, AL

256-355-0305Dothan, AL

334-678-1832Mobile, AL

251-457-8991Montgomery, AL334-288-6580

Shoals Area, AL256-383-5666Tuscaloosa, AL205-752-0621Panama City, FL850-763-4654Pensacola, FL850-505-0550Albany, GA

229-435-0982Atlanta, GA

404-366-0693Augusta, GA

706-798-7777

Calhoun, GA706-879-6200Columbus, GA706-562-1801Hoschton, GA706-654-9850Kennesaw, GA678-354-5533Macon, GA

478-745-6891Savannah, GA912-330-7500

POWER EQUIPMENT COMPANYKnoxville, TN865/577-5563LaVergne, TN 615/213-0900Chattanooga, TN423/894-1870Kingsport, TN423-349-6111Memphis, TN901-346-9800Saltillo, MS

662-869-0283www.powerequipco.com

ATLANTIC EQUIPMENT & SUPPLY

Hampton, VA 23661757/827-4778800/325-0461

www.aeandsupply.com

ASC CONSTRUCTIONEQUIPMENT USA, INC.

Asheville, NC828-687-0620Charlotte, NC704-596-8283Greenville, NC252-754-5280Raleigh, NC

919-661-8710Charleston, SC843-414-1120Columbia, SC803-791-0740Piedmont, SC864-704-1060

www.ascvolvo.com

GS EQUIPMENT INC.Tampa, FL

866-586-8956Fort Lauderdale, FL

954-327-8808Fort Myers, FL239-334-6063Jacksonville, FL904-268-4400Orlando, FL

407-859-9160www.gsequipment.net

LYLE MACHINERYJackson, MS

800-898-4000Fax: 601-939-8440

Gulfport, MS228-832-7575Hattiesburg, MS601-296-7556Magnolia, MS601-783-2111

www.lylemachinery.com

TRACTOR & EQUIPMENT CO.

www.tractor-equipment.com

Construction Equipment Guide • Crushing, Screening & Recycling Section • www.constructionequipmentguide.com • October 15, 2014 •

MC 110 Zi EVO MC 110 Ri EVO

Continuous Feed System High-tech jaw crusher Direct drive via fluid clutch

THE LEADER IN TECHNOLOGY: THE NEW MC 110 EVO

High production, quality product with maximum effi ciency, the all new Kleemann EVO jaw crusher.

www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES


Telestack ConveyorsPowerscreen Mid-Atlantic is a dealerfor Telestack conveyors. Providingmobile tracked stockpiling conveyors,radial telescopic conveyors and more!We have tracked units available forrental or purchase.

We also sell the full range of Powerscreen &Pegson parts. Want crusher & screen wear parts for Extec, Sandvik, Fintec, Finlay, Metso or Komatsumachines? Conveyor Belting Available! Call Us!

2010 model with 5828 hrs. CAT engine. Twin apron 4 bar crusher with feedopening of 44.5” x 31.5”.Overband magnet, dirt conveyor, underpan feederand wireless remote control. Machine is ready to crush! Location: Virginia.Priced to sell for $279,000

Powerscreen XH320 Impact Crusher

Spare Parts

2005 Model with Approx. 6930 Hrs, Deutz Engine, Two Deck 11x5’ ScreenBox, Attached Hydraulically Folding Stockpile Conveyors, Remote ControlTipping Grid over Feed Hopper, Machine on Wheel Twin Axle, Fully Servicedand Ready to Work! Location: North Carolina. Priced to sell at $89,500

Powerscreen Chieftain 1400

2007 Model with Approx. 2825 Hrs. One of the largest Mobile TrackedScreening Plants on the Market. Three Deck 20’ x 6’ Horizontal ScreenBox, Ideal Machine for Fine Aggregate Screening. Comes with AdditionalRecirculating Conveyor Mounted on Machine. Has a CAT Engine. Location:North Carolina. Price: $265,000 REDUCED TO ONLY $229,500

Powerscreen H6203

ALLSERIOUS OFFERS

CONSIDERED!


Demolition & Recycling

2006 Volvo EC460BLC and GenesisGXP660R 2006 Volvo EC460BLC with 9,500 hours,equipped with a Genesis GXP660R Mobile Shear w/360 rotation. Only 800 hours on a NEW ENGINE, only500 hours use on shear since a complete Genesisfactory rebuild, 2500 hours on NEW hydraulic pump..........................................................Call for Price.

2009 Cat M318D MH with Grapple 6735 Hrs,Hydraulic Elevating Cab, FOPS Cab Guarding, Heat& A/C, 36’ MH Front w/Drop Nose Stick, AutomaticGreasing System, Cat GSH15B 5 Tine (3/4 yd3)Grapple w/360 degree rotation, Outriggers x4, andDual Solid Tires, Checked through Cat Dealer Shop,1000 Hour Cat Service Completed and Work Ready.Fob Summerville, SC ......................Call for Price.

2002 Komatsu PC450LC-6 UHD 5,650 original hours,25 meter/82 ft 3 Piece Ultra High Reach DemolitionArrangement + Standard Digging front w/ HD Bucket, Bothfronts fully plumbed for Rotating Shear or ConcreteProcessor, FOPS Cab Guarding, Heat & A/C, Video CameraSystem, Variable Gauge U/C @ 75%+ remaining. Very goodall-around condition and appearance. Can go straight towork!!! ............................................................................................................................................................Call for Price.

2006 Cat 330DL with Labounty MSD2500R5450 Hrs, Auxiliary Hydraulics, Cab Guard, Heat& A/C, Good U/C, Equipped w/a Factory RebuiltLabounty MSD2500R Mobile Shear w/360 Rotation & Factory Warranty, Checked throughthe Shop, Serviced and 100% Work Ready. Fobour Yard in Summerville, SC ..........................................................................Call for Price.

2008 Deere 240DLC and GenesisGMS400R 2008 Deere 240DLC with 6,100hrs, equipped w/ Genesis GMS400R MobileShear w/ 360 rotation & XP upper jaw, CabGuard, Heat & A/C, and excellent U/C.Approximately 2000 hours total use on shearsince complete Genesis factory rebuild..........................................................Call for Price.

QUALITY USED DEMOLITION & RECYCLING EQUIPMENT

WE HAVE ATTACHMENTS FOR YOUR EVERY NEED

1050 Drop Off Drive • Summerville, SC 29483 (843) 873-8333 after hours: (843) [email protected]

KUHNEQUIPMENT.COM

2006 Cat M322C MH with Grapple11,201 Hrs, Hydraulic Elevating Cab, Heat &A/C, MH Front w/20’ Long Stick, 12.5 kw Generator System, Outriggers x4, and DualSolid Tires, Equipped w/HGT (1 yd3) 5 Tine Orange Peel Grapple w/360 rotation, VeryClean Machine that was Cat Dealer MaintainedSince New, Checked through Shop, Cat 1000Hour Service Completed, and 100% WorkReady. Fob Summerville, SC Call for Price.

2006 Hitachi ZX270LC-3 with 6600 Hrs,Cab w/Heat & A/C, Cab Guarding, Very GoodU/C and Equipped w/ LaBounty MSD2000RSaber Series Mobile Shear w/360 Rotation.Less than 250 Hour Use Since Complete Rebuild of Shear and All Components. ThroughShop and Work Ready. ........................................................Available for Sale or Rent.

Shears Pulverizers Processors Grapples Generator Sets

SOLDSOLD


Terex AggreSand 165 Washplant Celebrates First BirthdayTerex Washing Systems (TWS)

is celebrating the first birthday ofthe Terex AggreSand 165 wash-plant following the official launchin Ireland in September 2013. A lothas been achieved in the last year,with the successful installation ofthe AggreSand 165 washplant infive continents over 10 countries,processing up to 11 million tons(10 million t). Garry Stewart, application team

lead, TWS, said, “The market hasreally embraced the AggreSandwashplant concept with exception-al demand at the moment. To date,TWS has installed multipleAggreSand 165 washplants aroundthe globe. We are constantly look-ing at innovative ways to furtherenhance and develop our existingproducts so we can continue tomeet the individual needs of ourcustomers.”TWS hosted a number of events

in 2013 to officially launch theAggreSand 165 in both Ireland andUSA. The AggreSand 165 alsowas displayed as part of a doublebill at the Hillhead 2014 show, UK.The most recent event to showcasethe AggreSand 165 was at the firstof several planned open days in2014 in the Australia market. Theevent was hosted by Dubbo Sands,NSW, Australia, where the plantwas recently installed. Owners Mardi and Graham

Colbran, said “The professional-ism and dedication from TWS andMineral Washing Systems [one ofTWS Australian distributors],starting with purchasing rightthrough to commissioning hasbeen outstanding; we feel thatthere is nothing else currently onthe market, that even comes close.We chose the AggreSand 165washplant for ease of setup, havingthe ability to minimize disruptionto our site. Our AggreSand 165washplant incorporates the prewash system, which enables us tobring our sand into spec in just onepass, whilst producing three aggre-gates, giving us a very cost effec-tive operation. The quality ofdesign and construction of thisplant is easily seen, a lot of thoughthas gone into access for servicingto pumps, screens, and the con-trols, including remote operationfrom the loader, all of which areuser friendly. This plant demon-

strates what washing sand shouldbe, easy. We are positive ours willbe the first of many hittingAustralian shores.”The introduction of the

AggreSand 165 concept was inresponse to both changes in themarketplace and customerdemands, which consists of theAggreSand 165 washplant modeland the larger capacity, AggreSand206 washplant. Central to thedevelopment of the AggreSandconcept was modular design, serv-iceability and functionality, mak-ing it quick and easy to set-up andeasy to maintain. Customers alsobenefit from the unique design,which includes full containeriza-tion of the machine for ease oftransportation, rapid set-up time,pre-wired and pre-plumbed plugand play componentry, isolatedspray bars and a simple automatedcontrol system, all of which have

been delivering efficient, produc-tive performance for current own-ers, according to the manufacturer. The ongoing TWS commitment

to meeting customers’ needs sawthe introduction of another newpioneering product in 2014, theAggreScrub 150, designed to oper-ate both as a stand-alone unit aswell as having the ability to seam-lessly integrate with theAggreSand. The AggreScrub 150is designed to deal with stubbornclay bound material which cannotbe removed by rinsing or screeningalone. The AggreScrub product isshortlisted as a finalist in the“World Demolition Awards 2014”,in the “Innovation — SeriesProduct” category. Winners will beannounced at an awards ceremonyon Nov. 7. The Terex Aggwashplant was the winner of this partic-ular category in 2010. Since TWS was established in

July 2012, the company has gonefrom strength to strength and isnow firmly established as one ofthe leading material and mineralwashing solution providers in theglobal marketplace. The introduc-tion of three new products over thelast year demonstrates the ongoingTWS commitment to meeting cus-tomers’ needs through providingpioneering ways to wash sand,gravel, aggregates, wood andC&D waste. As a result of thisgrowth and in response to marketdemands, TWS has expanded theteam globally to provide a full anddedicated line of support for theTWS distributor network and cus-tomers. Product Line Director of TWS

Sean Loughran said: “We aredelighted to continually welcomenew talented and skilled teammembers to the TWS team. Theexperience they bring will ensure

TWS offers the same quality sup-port and services locally as well asin our other centers of excellencein USA and India. TWS is com-mitted to providing first class serv-ice, expertise and knowledge in thefield of mineral and material wash-ing from initial concept of plantideas through to after sales serviceand support.”TWS looks forward to more

successful months and years aheadand will continue to focus on intro-ducing further innovative and newsolutions for quarry, aggregate,mining and C&D recycling indus-tries, continually meeting cus-tomers’ needs and specific wash-ing demands.For more information, visit

www.terex.com/washing.(This story also can be found on

Construction Equipment Guide’s

Web site at www.constructionequip-

mentguide.com.)

Terex Washing Systems is celebrating the first birthday of the Terex AggreSand 165 washplant following the official launch in Irelandin September 2013.


Integrity. Generation After Generation.After being in business for almost a century, we’ve learned a thing or two. We know what it takes to keep your operation running smoothly: Commitment from your crew, quality equipment that works as hard as you do, and people that you can count on. Generation after generation, we continue to meet the demands ofthe job by building innovative products. We’ve led the way since 1928, and that leadership shows through in the integrity of our team. We’re proud to still be doing business the way we did back then.

CRUSHING MATERIAL HANDLING

SCREENING

TRACKS

WASHING & CLASSIFYING

www.scott-gallaher.com

www.kellytractor.com

www.stoneequipmentco.com

q p

y

g


Crush. Classify. Profit.

CRUSHING PLANTS

Closed-circuit PLANTS

CRUSHING PLANTS

SCREENING PlantsWe Call It EXPERTISE. You Call It PEACE OF MIND.

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.

For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w . i r o c k c r u s h e r s . c o m

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL?

Construction Equipment Guide is THE Place to List It!

2 InsertIons In one regIon

(northeast, southeast, Midwest, West)

30 words or less - .95 additional per word over 30

For an additional $20 we can post your ad on our

website in our online searchable database. You must have a classified print ad to do so.

ONLY

$30Call 800-523-2200 or go online to place your ad:

www.constructionequipmentguide.com/pages/customer/classifieds.aspand place your ad through our website and we will contact you!

®


Knoxville, TN (East) (865) 546-1414Knoxville, TN (West) (865) 218-8800Chattanooga, TN (423) 698-6943Kingsport, TN (423) 323-0400Crossville, TN (931) 484-4040Sevierville, TN (865) 595-3750

11657 Phillips HwyJacksonville, FL 32256(904) 288-9181(904) 288-9182 Fax(877) 213-9408 Toll Free

of Jacksonville

STOWERS MACHINERY CORPwww.stowerscat.com

BOBCAT OF JACKSONVILLEwww.bobcatjax.com

1050 Appalachian Hwy.Blue Ridge, GA 30513 (706) 632-3777Cumming, GA (770) 887-6119McDonough, GA (770) 957-3370Norcross, GA (770) 582-0377

MASON TRACTOR COMPANYwww.masontractor.com


© 2014 Caterpillar • All Rights Reserved • Printed in USA, their resp T FOR IT T, their respective logos, “Caterpillar YTERPILLAR, BUIL LT FOR IT, CA ATERPILLAR, BUILTT, CACA

corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

Cat.com

© 2014 Caterpillar • All Rights Reserved • Printed in USA,” the “Power Edge”trade dress as well as ellow, their respective logos, “Caterpillar Y

corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

,” the “Power Edge”trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

www.thompsonmachinery.comCamden, TN • 731-584-2732

Clarksville, TN • 931-552-5496Columbus, MS • 662-327-3083Cookeville, TN • 931-646-3200

Greenwood, MS • 662-453-5233Jackson, TN • 731-988-4240

La Vergne, TN • 615-256-2424Manchester, TN • 931-461-5000Memphis, TN • 901-332-3051Tupelo, MS • 662-844-1634

www.thompsontractor.comBirmingham, AL • 205-841-8601

Dothan, AL • 334-671-1040Huntsville, AL • 256-532-1776Mobile, AL • 251-626-5100

Montgomery, AL • 334-215-5000Oxford, Anniston, AL • 256-831-4104Panama City, FL • 850-785-4007Pensacola, FL • 850-471-6700

Shelby County, AL • 205-664-4833Tuscaloosa, AL • 205-247-2800

www.stowerscat.comKnoxville, TN (East) • 865-546-1414Knoxville, TN (West) • 865-218-8800

Sevierville, TN • 865-595-3750Chattanooga, TN • 423-698-6943Crossville, TN • 931-484-4040Tri-Cities, TN • 423-323-0400

louisianacat.comAlexandria, LA • 318-443-2577Bossier City, LA • 318-746-2341Hammond, LA • 985-340-2820Lafayette, LA • 337-837-2476

Lake Charles, LA • 337-439-3601Monroe, LA • 318-323-1345

Prairieville, LA • 225-673-3480Reserve, LA • 985-536-1211

www.ringpower.comDaytona Beach, FL • 386-947-3363

Gainesville, FL • 352-371-9983Lake City, FL • 386-755-3997Lakeland, FL • 863-606-0512

Ocala, FL • 352-732-2800Orlando, FL • 407-855-6195Palm Bay, FL • 321-952-3001Riverview, FL • 813-671-3700

St. Augustine, FL • 904-737-7730Sarasota, FL • 941-359-6050

Tallahassee, FL • 850-562-2121Tarpon Springs, FL • 727-938-1515

www.kellytractor.com8255 NW 58 StreetMiami, FL 33166

888-502-8033 • 305-592-5360Davie, FL • 954-581-8181

West Palm Beach, FL561-683-1231

Clewiston, FL • 863-983-8177Fort Myers, FL • 239-693-9233


www.terex.com • www.terexca.com

Company Wrenchwww.companywrench.com

Knoxville, TN Branch6325 Central Avenue Pike • Knoxville, TN 37912

1-866-262-4181 • 865-766-2571 • Fax: 865-766-2815

Raleigh, NC Branch125 Wilsons Mills Rd. Extension • Smithfield, NC 27577

1-855-Kobelco

Aiken, SC Branch1252 Old Kimbill Trail • Aiken, SC 29805

1-866-262-4181 • 803-642-0060 • Fax: 803-642-0209

Plant City, FL Branch2812 Airport Rd. • Plant City, FL 33563

1-866-262-4181 • 813-754-5800 • Fax: 813-754-5801


Company Wrenchwww.companywrench.com

Knoxville, TN Branch6325 Central Avenue Pike

Knoxville, TN 379121-866-262-4181865-766-2571

Fax: 865-766-2815

Raleigh, NC Branch125 Wilsons Mills Rd. Extension

Smithfield, NC 275771-855-Kobelco

Aiken, SC Branch1252 Old Kimbill TrailAiken, SC 298051-866-262-4181803-642-0060

Fax: 803-642-0209

Plant City, FL Branch2812 Airport Rd.

Plant City, FL 335631-866-262-4181813-754-5800

Fax: 813-754-5801


GOMACO Invitational #33Features AEM’s Harley Tour

Contractors, distributors,suppliers, associationmembers and media

personnel from across theUnited States and Canadatraveled to Ida Grove, Iowa,on Sept. 16 and 17 for theGOMACO Invitational #33.Number 33 featured excep-tional scores for all of theevents, and hosted a visit fromthe I Make America Harley-Davidson tour.

The Association ofEquipment Manufacturers’(AEM) Harley Tour stopped atthe Ida Grove Golf andCountry Club andGOMACO’s manufacturingfacility on Sept. 16. The dis-play featuring the custom-painted Harley-DavidsonRoad King motorcycle gath-ered a lot of interest from bothInvitational attendees andGOMACO personnel with240 individuals signing up asan I Make America supporter.During one 15 minute period,AEM logged in approximately75 registrations for I MakeAmerica and set a new recordfor the tour.

The GOMACO Invitationalgolf events began on Tuesdayafternoon, Sept. 16, with thePutting Tournament at the IdaGrove Country Club. Puttersparticipated in the tournamenton four different greens with

The Odebolt Course Champions (L-R) are Tom Giefer of Kansas Heavy ConstructionLLC; David Barthel of Faris Machinery; Mike Norrad of Norquip Supply Ltd.; andTravis Brockman of GOMACO.

The Ida Grove Course Champions, (L-R) are Tim Rife of Luxa Construction; GrantGodbersen of GOMACO; Murray Lodge of Topcon Positioning Systems Inc.; and KenSinger of Heavy Equipment Guide Magazine.

The Contractors’ Shoot-Out Champions (L-R) areRyan Grathwohl of ESS; Tom Giefer of Kansas HeavyConstruction LLC; and Derek Dilger of Smith Pavingand Excavating Inc.

The Holstein Course Champions (L-R) are Andy Kvidera of Manatt’s Inc.; SkylerLuxa of Luxa Construction Co.; Tom Farr of GOMACO; and Chad Hasert of PACEManufacturing Inc.

The Scramble Tournament “Grand” Champions (L-R) are Jim Hayward of GOMACO;Richard Michael of Turner-Michael Construction Co.; Andru Small of TerryEquipment; and Larry Berg of Wicks Construction.

The Putting Tournament Champions are KevinGesink (L) of Water Valley Investment Advisors Inc.and Al Meyerdirk of SunSource.

see GOMACO page 84

The GDR 400 is availablewith concrete cracker or concrete

pulverizer jaws.

Pro-Link ThumbOffers GreaterGrabbing Ability

Genesis Grows Demo Recycler ConcreteProcessor Product Family With GDR 400

The Geith progressive linkage (pro-link) hydraulic thumbprovides up to 180 degrees of rotation, allowing operators topick up and place rocks, tree stumps and pipes — amongother odd-shaped objects — closer to the excavator. The pro-link thumb’s universal pivot linkage system enables it to beinstalled on any excavator arm — without requiring theremoval of the dipper arm linkage.

Manufactured with high-strength steel, the thumb’sstrong, rigid structure and oversized high-profile pivot pinincrease torsion resistance. In addition, integrated linkagepositional stops protect the hydraulic cylinder from damage,while a lock-up pin enables operators to safely secure thethumb in a storage position when not in use. The induction-hardened-chrome hydraulic cylinder rod further extends thepro-link thumb’s working life.

For more information, visit www.geith.com.(This story also can be found on Construction Equipment


Genesis Attachments expanded its demolition recycler concreteprocessor product family with the new GDR 400.

Fitting 40 to 55 ton (36 to 50 t) excavators, the GDR 400 featuresa 48-in. (122 cm) jaw opening and 41-in. (104 cm) jaw depth, mak-ing it the line’s most powerful all-purpose processing and cuttingattachment for high-reach and standard demolition as well as road andbridge applications.

“The availability of the GDR 400 concrete processing attachment posi-tions Genesis to better serve the project spectrum of demolition contrac-tors worldwide, from small with our GDR 150 to now the largest projectswith the 400,” said Chad Wood, Genesis new product development engi-neer.

The GDR 400 is available with concrete cracker or concrete pul-verizer jaws, each of which minimizes dust, noise and flyingdebris while maximizing productivity, according to the manufac-turer.

(This story also can be found on Construction Equipment Guide’s

Web site at www.constructionequipmentguide.com.)

Doosan Wedge Lock Coupler AttachmentExpands Mounting System Lineup

Doosan has released thewedge lock coupler for usewith the company’s 6.6 to 58ton (6 to 53 t) crawler exca-vators. This new attachmentexpands the Doosan couplerline, which currently includesthe hydraulic quick coupler.

The new wedge lock cou-pler manual mounting systemis approved for use with 13crawler-excavator modelsincluding the DX63-3,DX85R-3, DX140LC-3,DX140LCR-3, DX180LC-3,DX225LC-3, DX235LCR,DX255LC-3, DX300LC-3,DX350LC-3, DX420LC-3, DX490LC-3 and DX530LC-3.

The wedge lock coupler allows operators to changetheir excavator attachments without the need for addition-al hydraulics, but does not decrease a machine’s breakout

force. The new coupler has alimited increase in tip radiusover pin-on mounting.

The wedge lock coupler isdesigned to allow for the useof multiple attachments, suchas Doosan’s line of heavy-duty digging buckets. It alsomounts the company’s cur-rent offering of trenchingbuckets and is capable ofefficiently releasing high-capacity bucket models. Thenew coupler also will pairwith Doosan’s excavatorclamp attachments.

In an effort to increase jobsite safety, the wedge lock coupler’s swing ear design andthe use of a bolt retainer safety plate helps prevent attach-ments from falling.


Pages 67-74For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

SECT IONAttachment & Parts

The Geith (pro-link)

hydraulic thumbprovides up to 180degrees of rotation.

The new wedge lock coupler manual mounting sys-tem is approved for use with 13 crawler-excavatormodels.

• October 15, 2014 • www.constructionequipmentguide.com • Attachment & Parts Section • Construction Equipment Guide

Your Source for Used Cat® Parts

.com.thompsonmachinerywww615-259-5820

Call or click today

.thompsonmachinerywwwVisit our new eBay store!

.com/ebay.thompsonmachineryVisit our new eBay store!

Construction Equipment Guide • Attachment & Parts Section • www.constructionequipmentguide.com • October 15, 2014 •

in

Follow us on social media for regular updates from Montabert!

Montabert breakers sense the hardness of material, adapting their power and strike frequency to deliver just the right amount of energy. You get the best possible performance every time, without all the wear and tear.

More breakups… Fewer breakdowns. That’s Montabert.

TougherThanEverything.

2905 Shawnee Industrial Way Suwanee, GA [email protected] 1-866-472-4373 fax: 866-472-4950

See our attachments in action!www.montabert-us.com

Montabert and the Montabert logo are registered trademarks of Montabert S.A.S. in the United States and various countries around the world.

erEvahTugoT

.ngihtyerna

erhug

hjnceuqerfor piehtetaf mo

tensesbatonM

hir evio dely tnc

e kirtd snr aewog nitpad, alaire

essndra hehrsekae brtreb

re breoM

eae whtiy treve

potsberenf eoe rht tsuj

…spukare

.read tnr aeal lt auhoti, wemi

ecanmrofr peelbiss poe ht tu geo. Yyg

t numot ahgie r

mwwwitti acniin

oueSe

Ms’thaT brweeF

mocus-trebtanomn!oon!iio

sttsneenmhhmcchattattt arr a u ur

.tberatno M.snwodkaer b

m

u

.www

ger rofw uolloF

m

m

in

oc.us-trebtanom

ors fetdar upala ideal micon ss ow u

-466 8x:fa7-4668-1

s@esalsu, GA 3eenawuS

ah5 S092

beatnoMuger rof

d tnt arebatnoM

059-427-4373-427

moc.trebatnoms@4200, GA 3

yal Waritsudne Ienw

!trbemors fetdar upal

edard teretsigee rro agot lrebatnoe Mhd t

d Setine Uhn t. iS.A.t Srebatnof Ms okrame

hd tnuors aeirtnuos cuoirad vns aetatd S

.dlroe w


99% of Americans have seen combat on TV.

1% of Americans have seen combat in Iraq or Afghanistan.

Phot

o by

Petty

Offi

cer 2

nd C

lass S

andr

a M. P

alum

bo, U

.S. N

avy -

Bah

rain,

Nov

embe

r 6, 2

007

We know where you’re coming from. We’ve got your back. Join the online community

at IAVA.org

North American Attachments

800-380-8808www.excavator-attachments.com

Excavator Attachments

Skidsteer Attachments

Loader/Backhoe Attachments

Quality Construction Attachments

Compaction Wheels Ditching Cleaning BucketDrain Holes Optional

Dual Action Grapples

Grapple Rakes Grapple Buckets Skeleton Buckets

Fork Carriages & FORKS

General PurposeLoader Buckets

Loader Rakew/Grapples

All Sizes... Manual &Hydraulic Thumbs

Dozer Rakes

HydraulicThumbs

Ripper Tooth Severe Duty & RockExcavator Buckets

Tree Stumpers Pin Grap Couplers

Since 1985!

CALL JENNIFER TODAY!(888) [email protected]

www.RBusedParts.com

NEW, USED & REMAN PARTS• Undercarriage

• Arms & Booms

• Cylinders

• Valves

• Transmissions

• Pumps

• Engines

• and More!


Please Contact Billy Harper or Tony Cruz at 904-733-1822 Hablamos Españolwww.mobromarine.com/parts/php

MOBRO MARINE, INC.

Mobro Marine Sells CRANE PARTSYou will find the parts you need at MOBRO Marine, Inc. We purchase in bulk directlyfrom the manufacturers to maintain our large inventory. We also have a large inventory of long-lead time parts for cranes that can’t be found anywhere else. Not only does thismean we have the part you need in stock, it also saves you money. Because we buy in

volume, we can buy for less and pass the savings on to you.

Our large inventory keeps construction equipment performing at optimum levels. We offer same-day shipping on most parts - you’ll experience minimal downtime.

We are a full-service company. We not only supply parts, but we also service and repair construction equipment and cranes of any type.

2082500022 - Two turntable bearings for a KomatsuPC400-3. Avon# 2055B3 ................................$7,175 Each2072500022 - Two turntable bearings for a KomatsuPC300-3. Avon# 1555B3 ................................$4,475 Each2052500021 - Two turntable bearings for a KomatsuPC200-3. Avon# 1148B4 ................................$3,450 Each24100N418F1 - One turntable bearing for a Kobelco 909.Avon# 1551B9 ..........................................................$2,075

21400N3354F2P1 - One turntable bearing for a Kobelco907C or K907C. Avon# 1447B2 ..............................$4,850KBB0282 / D28001 - One Link-Belt turntable bearing fora LS3400C. Avon# 1249B5 ......................................$3,950TH103075 - One John Deere turntable bearing formodel 792. Avon# 1556B8 ......................................$3,500TH108810 or AT190766 - One John Deere turntablebearing model 490D and 495D. Avon# 1143B9 ....$1,100

THIS MONTH’S SPECIALSWe sell high quality genuine OEM parts from the following manufacturers:

• Terex• American• Bucyrus-Erie• P&H• Kobelco• Koehring• Lorain• Northwest Crane


Whatever Your Application: RECYCLING • LOGGING • CONSTRUCTION • AQUATIC • WASTE HANDLING • DEMO • SCRAP • ROAD & BRIDGEWe Have Your Attachment: GRAPPLES • BUCKETS • CRUSHERS • RAKES • SHEARS • FORKS • CUSTOM ENGINEERING

CLICK OR CALL TODAY! PEMBERTONATTACHMENTS.COM • 1-800-393-6688

No matter what your material, Pemberton has the bucket, grapple or forks to handle it and we can fit it to your specific wheelloader or excavator. We have the attachment you need for construction, demolition, logging and scrap material or waste handling.

Got MATERIALSto Move?

Contact Pemberton today to see how we can help you maximize your equipment and your manpower.

Get the latest news online.Visit CEG’s Web Site at

www.constructionequipmentguide.com

N

B

413 ppi

A

--

1

:

Printer Output Date

9

9-28-2010 3:57 PMM

M

ΣΑςΕ Α ΛΙΦΕ. ∆ΟΝ∏Τ ∆ΡΙςΕ ΗΟΜΕ ΒΥΖΖΕ∆.

ΒΥΖΖΕ∆ ∆ΡΙςΙΝΓ ΙΣ ∆ΡΥΝΚ ∆ΡΙςΙΝΓ.

T

1 1 1:30 ΠΜ


overbuilt to be overworked.2905 Shawnee Industrial Way, Suwanee, GA 30024 T. 800-762-4090 F. 866-472-4950E. [email protected]

Find your bucket at www.geith.com

Geith and the Geith logo are trademarks of Geith International Limited.


PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996

ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!

Paladin’s Bradco Hardscape Grapple — All Gain No PainThe Bradco hardscape grapple by Paladin Attachments is the

newest addition to Paladin’s grapple selection. Designed to eliminatethe back-breaking job of moving heavy hardscape materials fromplace to place, they are mounted on skid steer loaders, compact toolcarriers and compact tractors for quick and easy handling of materi-als such as concrete paver sections, small boulders and granite/lime-stone/concrete steps. They are ideal for hardscape supply dealers,landscapers and property owners doing their own landscaping.As a hydraulically-powered alternative to forks, pry bars and brute

strength, the attachment’s grapple arms and rubber grips adjust auto-matically to the shape and contour of the material being graspedwithout additional positioning. For increased safety, a cylinder checkvalve prevents loss of clamping force even if the machine’s hydraulicpower is lost. Users also can easily reach over other sections of mate-rials for specific selection, or load and unload heavy hardscape mate-rials from the bed of a trailer or truck. For easy storage, the hardscape grapple has a simple stand utiliz-

ing two steel tubes that have been integrated into the attachment andcan be stored neatly in the quick attach when not in use. Weighing175 lbs. (79 kg), this grapple attachment can lift up to 1,500 lbs. (680kg) with a clamp force of 1,525 lbs. Designed with a grip range of18 to 48 in. (46 to 122 cm), a plunge depth minimum of 13 in. (33cm) and a maximum reach of 14 in. (35.5 cm) the hardscape grappleis purpose-built with the landscaper and hardscape supply dealer inmind.For more information, call 800/456-7100 or visit www.paladinat-

tachments.com.(This story also can be found on Construction Equipment Guide’s

Web site at www.constructionequipmentguide.com.)

As a hydraulically-powered alternative to forks, pry bars and brute strength, the attachment’s grapplearms and rubber grips adjust automatically to the shape and contour of the material being graspedwithout additional positioning.

cONSTRUcTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 15, 2014 •

THINK. AHEAD.

Meeting emissions regulationsdemands forward thinking. AndJohn Deere has always beenahead of the game. So when youasked for simple, proven InterimTier 4-certified technology thatwon’t hold you back, weanswered. First with the 744K,*and now with the IT4-certified644K and 724K Loaders. Ouremissions technology is simpleto operate and maintain. And itdelivers the power, fuel efficien-cy, reliability, and low cost ofownership you’ve come to expectfrom John Deere. Need a partnerfor emissions solutions? We’reOn It™.

* First machine over 75 hp in the indus-try to be certified to meet U.S. InterimTier 4 emissions.

Albany, GA229/888-1212Atlanta, GA

404/691-9445Grovetown, GA706/855-5440Columbus, GA

706/687-3344Braselton, GA

770/965-1889Macon, GA

478/788-1586

Adairsville, GA770/773-9857Brunswick, GA912/264-6161Savannah, GA

912/964-7370Dothan, AL

334/794-8691Troy, AL

334/566-4181Aynor, SC

843/358-5688

West Columbia, SC803/794-9340Simpsonville, SC864/963-5835Ladson, SC

843/572-0400Andrews, SC

843/221-4940Walterboro, SC843/539-1420

R.W. MOORE EQUIP. cO.

Main OfficeGarner, NC

919/772-2121Ahoskie, NC

252/332-5550Hope Mills, NC910/424-1200New Bern, NC

252/638-5838Greenville, NC

252/758-4403Castle Hayne, NC910/675-9211

Ashland, VA804/798-6001Manassas Park, VA

703/631-8500Winchester, VA540/667-9777Richlands, VA

276/596-9440Asheville, NC

828/667-0176

Charlotte, NC704/597-0211800/532-6797Greensboro, NC336/668-2762800/632-0376Mt. Gilead, NC910/439-5653800/692-9175Salem, VA

540/380-2011

cOASTAl EQUIPMENT

cORP.

www.coastalequipment.netMain Office

504 South MilitaryHwy.

Virginia Beach, VA23464

757/424-1900Yorktown, VA

757/898-1900

Nashville, TN615/501-8600Chattanooga, TN423/855-0633Knoxville, TN

865/546-3207Kingsport, TN

423/349-5001Louisville, KY

502/253-3721Richmond, KY

859/623-2030

Bowling Green, KY270/842-3400London, KY

606/862-8447Lutz, FL

813/995-0841Riverview, FL

813/621-4902Sarasota, FL

941/752-1300Fort Myers, FL

239/334-3627

Miami, FL305/592-5740

Pompano Beach, FL954/977-9541West Palm Beach,

FL561/848-6618Orlando, FL

407/299-1212

flINT EQUIPMENT cOMPANy JAMES RIVER EQUIPMENT NORTRAX

,

u

a e

M a 5

,

4


EARTHMOVER CONSTRUCTION EQUIPMENT LLCA Division of Advantage

Construction Equipment & Parts8451 SW Old Kansas Ave.

Stuart, FL 34997407-401-8956

www.constructionequip.com

INTERNATIONAL IRON2325 Clark St

Apopka, FL 32703407-809-5856F407-347-4664

www.intiron.com

HAWKINS-GRAVES, INC.13432 Wards Rd.

Lynchburg, VA 24501434-847-7703866-847-7703

www.hawkinsgraves.com

RICHARDSON SERVICE 1991 INC.2667 U. S. 378,

Conway, SC 29527843-397-2050

www.rs91inc.com

TAR HEEL MACHINERY165 Sommerville Park Rd.

Raleigh, NC 27603919-773-1425

www.tarheelmachinery.com

ATLANTIC COASTAL EQUIPMENTSALES & RENTALS

922 Longwood DriveRichmond Hill, GA 31324

912-459-1155www.acesalesandrentals.com

ARTBA Honors Outstanding Efforts toImprove Safety in Roadway Work ZonesAmerican Road & Transportation Builders Association’s

Transportation Development Foundation (ARTBA-TDF)recognized six private sector organizations for their commit-ment to promoting safety during the association’s 16th annu-al “Roadway Work Zone Safety Awareness Awards.” Theawards were presented at a Sept. 8 luncheon duringARTBA’s National Convention in Rancho Palos Verdes,Calif. The competition recognizes outstanding programs, cam-

paigns and technologies aimed at helping reduce roadwaywork zone accidents, injuries and fatalities. Winners wereannounced in three categories:

Outreach Campaigns: Recognizes efforts that promoteroadway work zone safety through implementation ofemployee and/or public education campaigns on a national,state or local level.

Training Programs: Honors national, state and localeducational programs that promote worker safety on the jobsite.

Innovations in Technology: Recognizes the importantrole that technology plays in improving safety in and aroundwork zones with innovative products and methodologies orinnovative applications to existing products and methodolo-gies.

Outreach Campaign/State Level — DBi ServicesLLC: “Billboard and Student Driver Outreach”In conjunction with National Work Zone Safety

Awareness Week, DBi Services sponsored a series of bill-board ads and roadway message boards to remind the motor-ing public of the importance of driving carefully in road con-struction zones. The billboards appeared along stretches ofI-75 in Fort Meyers, Fla., and had the potential to reach68,000 motorists per day. DBi employees distributed morethan 1,000 work zone safety “fact sheets” at rest areas nearconstruction sites and in an effort to educate new drivers onthe need to drive cautiously, the company also sponsoredindustry expert presentations to high school students aboutthe dangers of driving in work zones.

Outreach Campaign/State Level — GraniteConstruction Company and Dannenbaum EngineeringCorporation: “Chisholm Trail Parkway Section 6Design-Build”Granite Construction Company and Dannenbaum

Engineering Corporation found an innovative way to protectworkers and the traveling public while accelerating the con-struction schedule of Section 6 — a 13.1 mi. (21 km), $182.5million design-build segment of the 27.6 mile ChisholmTrail Parkway in Johnson and Tarrant Counties in Texas. The project, constructed in a Texas Super 2 configuration,

required careful consideration of median barrier placement,stopping sight distances, passing lanes configurations andrailroad overpass design services. The project team installeda barrier concept that provided protection to the opposingtraffic and eliminated the possibility of cross over head oncollisions. They implemented an onsite Construction SafetyProgram, which incorporated daily “Take 5” meetings, JobHazard Analyses, weekly safety meetings, and also madejob-specific orientation and training courses mandatory. As of June 30, 2014, Section 6 has recorded zero fatalities

and has an OSHA Recordable Incident Rate of 2.24 — wellbelow the national average of 3.4.

Outreach Campaign/Local/Regional Level —Transurban-Fluor, AAA Mid-Atlantic, and 95 ExpressLanes: “Orange Cones. No Phones.”Since 2009, Transurban-Fluor and AAA Mid-Atlantic

have been generating awareness of the dangers of distracteddriving in a constantly changing construction zone with its“Orange Cones. No Phones.” campaign in Virginia. Theeffort aims to reduce work zone related incidents caused bymotorists who use their cell phones while driving along theheavily-congested I-95 corridor. The program incorporatesa series of TV and radio public service announcements, inter-net ads, social media posts, news conferences, distribution ofsafety materials, and installation of “Orange Cones. NoPhones.” roadway signs along the project corridor.

Training Programs/National Level — OldcastleMaterials Inc.: “Best Practices for Mitigating Effects ofWork Zone Intrusions Guide & Training Program”Oldcastle Materials put together an experienced safety

team with in-depth knowledge of work zone traffic control“best practices” to develop a reference guide book and train-ing program that aims to limit injuries from vehicle intru-sions in work zones. The company’s manual, “Best Practicesfor Mitigating the Effects of Work Zone Intrusions,” pro-vides front-line supervisors, crew leaders and others respon-sible for work zone set-up with recommendations, standards,typical applications and products to help raise the level ofprotection of workers on site.

Innovations in Technology/Products ILLUMAGEARInc.: “The Halo Light”The Halo Light, developed by technology lighting firm

Illumagear, is a Personal Active Safety System that protectsworkers in low visibility, high-risk work zones. The productis portable, hands-free and incorporates a band of LEDs thateasily attach to standard hard hats producing a ring of lightand enabling the wearer to see and be seen up to a quartermile away in all directions at all times. The Halo light ispowered by a rechargeable battery that lasts up to 12 hoursand provides four sets of lighting options. The technologyprovides transportation construction workers with an addedlayer of safety protection equipment in vulnerable condi-tions.

Innovations in Technology/Process — Royal Truck &Equipment: “Mobile Safety System and TMA Trucks”In 2014, Royal Truck & Equipment, the largest manufac-

turer of TMA/Attenuator Trucks in North America, releasedan integrated technology package called “Mobile SafetySystem” for its TMA Trucks. Although TMA trucks act asprotective crash barriers that prevent vehicles from enteringa work zone and injuring workers on the job site, they do notprovide real time feedback or early warning signs to opera-tors. With Royal’s new Mobile Safety System, attenuator

trucks are now equipped with important pieces of safetytechnology — radar speed notification system, mini-change-able message system, backup camera system and black boxrecording system — that effectively encourages lower driv-ing speeds, increases driver awareness and most important-ly, protects workers from direct exposure to the dangers ofhighway construction.



SANY America Inc.318 Cooper Circle, Peachtree City, GA 30269Tel: 678-251-2869 | Fax: 770-632-7820Email: [email protected]

MORE. DIGGING. EFFICIENCY.OPTIONS.

.

Inc. America SANYcle, Peachtr318 Cooper Cir

el: 678-251-2869 TTel: 678-251-2869 | Fax: 770-632-7820Email: [email protected]

, GA 30269ee Citycle, Peachtr Fax: 770-632-7820

Email: [email protected]



CENTRAL ATLANTA TRACTOR SALES, INC.

7330 Delta CircleAustell, GA 30168770-819-6600

www.centralatlantatractor.com

TUFF EQUIPMENTCOMPANY

181 Industrial Blvd.LaVergne, TN 37086

615-851-43451-877-634-TUFF

www.tuffequipco.com

MECO MIAMI, INC.5825 NW 74th Avenue

Miami, FL 33166305-592-4332

www.mecomiami.com

MCMILLAN MACHINERY SALES712 Spring Lake RoadThomasville, GA 31792

229-236-6594www.mcmillanmachinery.com


ARKANSASAlma Tractor & Equipment, Inc.

Alma479-632-6300

www.almatractor.com

Lift Truck Services, LLCLittle Rock

501-568-3330www.ltscforklift.com

FLORIDABobcat of Fort Myers LLC

Fort Myers, FL 239-334-4987

www.cfbobcat.com

Bobcat of Jacksonville LLCJacksonville904-288-9181

www.bobcatjax.com

Bobcat of TampaTampa

813-626-3470www.cfbobcat.com

Bobcat of OrlandoOrlando

407-273-7383www.cfbobcat.com

GEORGIACowin Equipment Company, Inc.

Mableton404-696-7210www.cowin.com

LOUISIANALionSquare Equipment, Inc.

Shreveport318-674-8824

www.equipmentinc.com

MISSISSIPPIH & E Equipment Services, Inc.

Jackson601-373-0444

www.he-equipment.com

NORTH CAROLINAH & E Equipment Services, Inc.

Charlotte704-504-2870

Fletcher828-684-1692

Garner919-781-9454

Winston-Salem336-767-6900


SOUTH CAROLINAH & E Equipment Services, Inc.

Columbia803-776-8465

Greenville864-272-2600


TENNESSEEBobcat of Nashville

La Vergne615-941-4000

www.bobcatofnashville.com

H & E Equipment Services, Inc.Memphis

901-375-4902www.he-equipment.com

VIRGINIAH & E Equipment Services, Inc.

Ashland804-798-9740

Chesapeake757-295-4944

Roanoke540-362-3600

Warrenton540-349-2878


Authorized Doosan Dealers

o.cortcartalma.www00-632-63974

almApmeiuEqr & otcara TmlA

SASNAKRA

70C

piuqH & E EHTNOR

mo

.c In,tnpmeSAS

sreale Danoso DdzeirohtuA

7082-405-470ettlorahC

.cn, Isecivret SnemANIOLR CAH

7894-43-3392L, Fsreyt MroFeyt Mrof Ft oacboB

AIDROLF

oc.tflikrofcst.lwww3033-86-5150kcoe RlttiLecivrek Scurt TfiL

H CTUOS

h.www33niW

19

28

LCLs Lre

mo

CL, Ls

ANILROAH C

moc.tneipmuqe-eh9006-767-63

melaSn-otsn

45491-8-79renarG

92614-86-82rechteFl

mo.ctacbobf.cwww0743-62-6318

mpaaTma Tf otcabBo

oc.axjtacbob.www1891-828-409eillvnoskcaJvnoskcaJf t oacboB


LacboBNNEET

h.www68G

038C

piuqH & E E

m

pa

m

CL Leillv

m

engr VeaLellivhsaf Nt oa

ESESNNE


eillvneerG

5648-677-03aiblumoC

.cn, Isecivret Snem

012696404notbleaM

m Cotnpmeiu EqniwCoAIGREOG


ondalOrndoal Orf otacobB

mo.ctacbobf.cwww

piuqH & E EV

h.www90

MpiuqH & E E

obb.www16L

.c In,ynpam

m

ndo

m

cn, Isecivret SnemAIINGIR


shipmeM.cn, Isecivret Snem

omc.ellivshanfotacob0004-149-5engr VeaL

PIPSISSISIM

c.cintneipmuqe.www4288-4768-13torpevehrS

pmeiu EqeruaqSnoiLANAIOUISL

mocin.owc.www012-7696-404

h.www45War

405

57heC

80

piuqH & E E

PI

moc

.c In,tnpmeA


notnerWar

0063-263-40ekonaRo

494-4592-75ekaepashe

0479-9874-80dnahlsA

.cn, Isecivret Snem

c.tneipmuqe-eh.www4440-73-3106

noskacJvret SnempiuqH & E EPIPSISSISIM

moc

.cn, IsecivPI

ipmq

Safety Features Include ROPS,Anti-Skid Surfaces, Skylighting the operator or the job. Electronic, fuel,air, and aftertreatment components like amaintenance-free diesel particulate filterensure customer expectations for productiv-ity, fuel efficiency, reliability and service lifeare met.

The inherent fuel efficiency of the C7.1 isfurther enhanced with an automatic enginespeed control (lowers engine rpm during no-

load/light-load conditions), an engine idleshutdown system (stops the engine after apre-set idling interval), and an Eco mode thatallows operators to tailor machine perform-ance to the application. The engine also runsefficiently on biodiesel blends up to B20.

The 323F L ES's powerful hydraulicsystem places major components in closeproximity; this minimizes piping lengths andreduces frictional losses and pressure drops.The system delivers precise flow volumewhere and when it is required. Combinedwith boom and stick regeneration circuitsthat reduce the load on the main pumps, theCat hydraulic system contributes to overallfuel savings.

The pressurized cab is spacious and quietwith large glass areas for all-around visibili-ty. It features positive air filtration, height-adjustable joystick consoles, a large colormonitor, radio with MP3 auxiliary audioport, and available air suspension, heated,and cooled seat options to help make opera-tors comfortable and productive.

Serviceability features include ground-level access to major maintenance points,electric fuel system priming pump, remotefuel tank drain, and a fuel level indicator tohelp avoid overfilling. Safety featuresinclude a cab-integrated roll-over-protectionstructure (ROPS), anti-skid surfaces, pro-grammable halogen working lights, easilystored upper and lower windows, large sky-

light and a rearview camera system.

Technology EnhancementsEquipment owners need to employ their

machines to full potential in order to realizemaximum return on investment. They needto produce more in less time using less fuelwhile avoiding unnecessary machine wearand ensuring the safety of everyone on the

job site. Cat Connect helps customers getmore value from their Cat equipment andimprove jobsite efficiency by capitalizing onCaterpillar technology and Cat dealer servic-es.

Cat grade control depth and slope is oneof the Cat Connect offerings, and it is a fac-tory-integrated system that will get operatorsto grade quickly and efficiently. The sys-tem’s well-protected front linkage sensorsprovide real-time positioning and cut and filldata right through the standard cab monitor.Not only will this help operators get diggingand slope work done right the first time tosave money on fuel and materials, but it alsominimizes the need for a grade checker. Thesystem can easily be upgraded to 3D capa-bility through the Cat dealer by adding CatAccuGrade GPS or universal total station(UTS) systems.

Link technologies, like the optionalProduct Link system, wirelessly connectsowners to their equipment, providing accessto valuable machine data such as location,hours, fuel consumption, idle time, events,and diagnostic codes for analysis and report-ing via the online VisionLink user interface.Link information assists with fact-baseddecision making to help increase efficiencyand lower owning and operating costs.

For more information, visit www.cat.com.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

CAT from page 32

The system’s well-protected front linkage sensors provide real-time positioning and cut and fill data right through the standard cab monitor.


– Todd Hyman, Grand Venture Dairy, LLC Adams, New York

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2014 Doosan Infracore Construction Equipment America. All rights reserved. | 0914204

Doosan Deliverswww.doosanequipment.com/Todd11

“ 7 days a week, 365 days a year, and the loader has not let us down.”


MISSISSIPPIPUCKETT RENTS

www.puckettrents.comRichland

(601) 939-5151Biloxi

(228) 392-2211Hattiesburg

(601) 264-1111Meridian

(601) 703-0116Madison

(601) 859-5131

GEORGIAFLINT EQUIPMENT CO.www.flintequipco.com

Adairsville(770) 773-9857

Albany(229) 888-1212

Atlanta(404) 691-9445Braselton

(770) 965-1889Columbus

(706) 687-3344Grovetown

(706) 855-5440Macon

(478)788-1586Savannah

(912) 964-7370Brunswick

(912)264-6161

SOUTH CAROLINAFLINT EQUIPMENT CO.www.flintequipco.com

Aynor(843)358-5688Simpsonville(864) 963-5835West Columbia(803)794-9340Ladson

(843)572-0400Andrews

(843)221-4940Walterboro

(843)539-1420

NORTH CAROLINAJAMES RIVER EQUIPMENTwww.jamesriverequipment.com

Asheville(828) 667-0176Charlotte

(704) 597-0211Greensboro

(336) 668-2762Mt. Gilead

(910) 439-5653Wilkesboro

(336) 973-8201

R. W. MOORE EQUIPMENTCO.

www.rwmoore.comGarner

(919) 772-2121Ahoskie

(252) 332-5550Castle Hayne(910) 675-9211Fayetteville

(910) 424-1200Greenville

(252) 758-4403New Bern

(252) 638-5838

ALABAMATHOMPSON TRACTOR

www.thompsontractor.comAuburn, AL

(334) 321-2030Birmingham, AL(205) 326-0334Dothan, AL

(334) 673-3300Huntsville, AL(256) 532-3001Mobile, AL

(251) 452-1180Montgomery, AL(334) 262-1101

Oxford/Anniston. AL(256) 835-5737Shelby County, AL(205) 649-9489Tuscaloosa, AL(205) 247-3402

FLINT EQUIPMENT CO.www.flintequipco.com

Dothan(334) 794-8691

Troy(334) 566-4181

Groundbreaking Women HonoredWith 2014 ARTBA Leaders AwardsA 35-year bridge building veteran, a 30-year expert on alter-

native project delivery, a well-known international design firm,and two University of Maryland graduate students were hon-ored as part of the American Road & Transportation BuildersAssociation’s Transportation Development Foundation(ARTBA-TDF) “Women Leaders in Transportation Design &Construction Awards” program. The awards were presented in three categories during a spe-

cial luncheon held in conjunction with ARTBA’s 2014 NationalConvention in Rancho Palos Verdes, Calif.:

• The Ethel S. Birchland Lifetime Achievement Award:Named after ARTBA’s executive director from the mid-1920s,it is given to individuals who have demonstrated outstandingleadership, long-term service in the industry’s public or privatesectors and dedication to the advancement of innovation andother women leaders.

• The Glass Hammer Award: Honors companies in thetransportation construction industry that have innovative pro-grams and activities directed at successfully promoting womenleaders within their organization.

• The Future Industry Spotlight Award: Recognizes stu-dents enrolled in undergraduate or graduate studies at a U.S.college or university who have achieved an outstanding aca-demic record and demonstrated extraordinary leadership skillswithin and outside of the academic environment.

Ethel S. Birchland Lifetime Achievement Award Linda Figg, FIGGAs president, chief executive officer and director of bridge

art for Figg Engineering Group (FIGG), Linda Figg heads afamily-owned company specializing in creating some of theworld’s most aesthetically pleasing and state-of-the-art bridges.Under her management, the firm has designed and constructed$10 billion worth of bridges in 42 states and six countries. Herinnovative leadership extends beyond the company walls. Sheis member of many professional organizations includingARTBA, the American Segmental Bridge Institute, theConstruction Industry Round Table and the American Societyof Civil Engineers, where she was instrumental in creating the“Eugene C. Figg Jr. Civil Engineering Scholarship” that pro-vides internship opportunities for young men and women inter-ested in the field of engineering. Her commitment to advancing the interests of the industry is

evident in the 300 educational workshops she has facilitatedthroughout her career, an award-winning educational DVD shecreated to stimulate student interest in bridge design, and herinvolvement with the National Building Museum to educatechildren about industry careers. She also pioneered an innova-tive outreach process in bridge design by encouraging local cit-izens to choose designs that best represent their communities.

Katherine Nees, Texas Department of Transportation(TxDOT)Katherine Nees has more than 30 years of experience man-

aging, financing, procuring, planning, and designing con-struction projects totaling more than $25 billion in Texas andacross America. At the TxDOT’s Dallas District, she was thefirst female construction engineer and the youngest directorof administration. In 1998, she joined the North TexasTollway Authority as deputy executive director, where sheoversaw the delivery of complex multi-agency toll projectsincluding the $1 billion President George Bush Turnpike,Addison Toll Tunnel, DNT Extension and the nation’s firstopen-road toll facility. At Jacobs Engineering, Nees served as a division vice presi-

dent and developed the practice’s National Toll and Public-Private-Partnership group, which managed over $15 billion ininnovative projects for 10 state DOTs, the Harris County Toll

Authority and the Metropolitan Washington Airports Authority.As the current deputy director for the Strategic ProjectsDivision at TxDOT, she provides leadership for the $26 billionP3 and Design-Build program. Nees served on the TexasTransportation Institute Advisory Board, TxDOT Blue-RibbonTransportation Committee, Dallas Fort Worth RegionalTransportation Committee, and will become a board member ofthe International Bridge, Tunnel and Turnpike Association thisfall.

The Glass Hammer AwardCH2M HILLCH2M HILL has dedicated significant resources to creating

programs that promote the advancement of women within thetransportation construction industry. The company’s Women’sEmployee Network, Women’s Leadership Initiative andLeadership Excellence through Accelerated Development pro-grams focus on delivering strategic learning opportunities toleverage women employees and help them achieve businesssuccess. All three programs incorporate mentoring; provide network-

ing opportunities; target recruiting for both new graduates andexperienced hires; and feature diversity awareness and leader-ship coaching. In 2009, CH2M HILL was recognized for its innovative

organizational approaches and commitment to promotingwomen in the workplace with the “Catalyst Award” by a non-profit group dedicated to advancing women in business and wasnamed the top employer in “Woman Engineer” magazine.

Future Industry Leader Spotlight Award Eirini Kastrouni, University of Maryland, College ParkKastrouni is pursuing her doctorate in civil engineering at the

University of Maryland, where she is focused on quantifyingthe economic benefits of multi-modal transportation infrastruc-ture projects and designing an equitable mileage-based user feescheme to replace or complement traditional fuel taxes. Shemaintains a 3.9 grade point average (GPA), while serving asvice president of the university’s Institute of TransportationEngineers Student Chapter. She is an active member of theTransportation Research Board’s Committee on Transportationand Economic Development. Kastrouni hopes her research willlead to the design of an innovative user-friendly tool that feder-al, state and local agencies will use while performing benefit-cost analyses of project alternatives across all transportationmodes.

Sadaf Khosravifar, University of Maryland, CollegeParkKhosravifar is pursuing a doctorate in geotechnical and pave-

ment engineering at the University of Maryland. She has a 4.0GPA and is a member of numerous professional associations,including the Society of Women Engineers, TransportationResearch Board and the American Society of Civil Engineers.In 2013, she received fellowship and acceptance to the ClarkSchool of Engineering Future Faculty Program. She hasworked on several projects funded by Federal HighwayAdministration and Maryland State Highway Administration(SHA). During her master’s degree studies at Maryland, she per-

formed extensive laboratory and field investigations exploringthe behavior of foamed asphalt stabilized base, a relatively newenvironmentally friendly recycled material. Her research wasapplied to develop specifications and recommended practicesfor Maryland SHA and was published at several peer-reviewedconferences.



FLORIDANORTRAX

www.nortrax.comTampa

(813) 635-2300Orlando

(407) 299-1212Pompano Beach(954) 977-9541

Riverview(813) 621-4902

Sarasota(941) 752-1300Fort Myers

(239) 334-3627Lutz

(813) 995-0841Miami

(305) 592-5740

THOMPSON TRACTORwww.thompsontractor.com

Pensacola, FL(850) 471-6710

VIRGINIAJAMES RIVER EQUIPMENT

www.jamesriverequipment.comDanville

(434) 822-6110Fishersville

(540) 337-3057Manassas

(703) 631-8500Salem

(540) 380-2011Winchester

(540) 667-9777

LOUISIANAH & E EQUIP SERVICESwww.he-equipment.com

Alexandria(318) 443-7173Baton Rouge

(225) 356-6113Bossier City

(318) 746-5272Kenner

(504) 467-5906Lafayette

(337) 837-9600Lake Charles

(337) 528-2661


Designers Track Manpower, Equipment With RFID Tagstemporary gates and temporary ticketing,pedestrian walkways that are just for the raceweek or two weeks, depending on the event.So 30 to 60 days out from the race, we’redoing those temporary provisions. The con-struction slows down considerably, and thenyou have the race. We work with theSpeedway, they put the race on, and within afew days after the race, we’re demobilizingthose activities and starting back our con-struction.”The upcoming Budweiser Speedweeks

(in 2015) will be the first time any newgrandstand seating is used, and 40,000 newseats will be available at that time. For thisarea, 2,500 auger cast piles were installed,which were roughly 30 to 40 ft. (9.1 to 12.1m) deep and 18 in. (45.7 cm) in diameter.Three different rigs were onsite for this workin order to meet the schedule. This work wasdone by H.J. Foundation.At its peak, Moser reported that the proj-

ect will involve about 700 workers on site.Earlier in the summer, 400 to 500 workerswere involved.Zev Cohen is the local civil engineer who

designed all the underground for the project.Subcontractors include P & S Paving, H.J.Foundations, and Steel Fab and many other

local companies.“I think our biggest challenge in the steel

erection was just coordination with the air-port and the FAA requirements, becausewe’re so close, and it’s not just the airportthere — we’ve got the flight school, soyou’ve got student pilots that are doing touchand go’s all day, and we’ve got 10 or 12

sticks in the air that hadn’t been therebefore.”From a technology standpoint, Moser

noted that one thing they have been doing onthis project is tracking both manpower andequipment with RFID tags.“Anything or anyone that comes onsite

goes through a scanner or a bar code reader,

so we’re able to know exactly who and whatis on site,” Moser said. “That’s really helpingus with our planning and with our projectingwhere we’re going to be based on the num-ber of workers and the number of pieces ofequipment. We’re just really exploring howto use that technology. It’s been around —people have had badges with barcodes, butwe’re learning how to use it on the site tomake us more efficient.”After one year of work in July, the project

had included the delivery of more than 950prefabricated metal stud wall panels, theinstallation of 1,000 sq. ft. (92.9 sq m) ofexterior metal panels, the placement of18,700 cu. yds. (14, 297 cu m) of concrete,the installation of 1,820 new steps, the instal-lation of 18 of 40 elevators, more than412,000 sq. ft. (38,276 sq m) of slab-on-metal deck pours, the fabrication of 84 per-cent of the structural steel (the same amountas all of the steel at AT&T Stadium inTexas), the laying of more than 176,000masonry units, and a total of 639,000 manhours.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG

A marshalling yard known as Lot 10 was used for bringing steel to the cranes forerection.

DAYTONA from page 36

Linder Features Latest Technology From Product Offerings

The German Connection provided entertainment dur-ing the event.

Bill Fisette (L) of Linder Industrial Machinery andDavid Jenkins of Solesbee’s Attachments stand ready atthe Solesbee’s table.

Jim Ewart (L) of United Infrastructure Group inColumbia and Richard Jackson, C.R. Jackson, attendthe event.

(L-R): Jason Wilkie, Matt Coble, Dennis Warner andKenny Lupo, all of J.C. Wilkie Construction, inLexington, N.C., enjoy the celebration and look overthe lineup of excavators.

OKTOBERFEST from page 40


Authorized Terex Cranes Distributors

With over 100 years of experience and a commitment to speed, Terex Cranes focuses on getting the job done, aiming at maximum uptime and a high return on investment. Because your results are what really matters.

Contact our distributors and find out how we can help to improve your bottom line.

Copyright 2014 Terex Cranes. All rights reserved. Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries.

For Your Local Terex Dealer, Please Contact: Terex USA, LLC, 106 12th St. SE • Waverly, IA 50677 USAPhone: (319) 352-3920 • Fax: (319) 352-9395

email: [email protected]: www.terex.com/cranes

MARYLAND4601 Washington Blvd.Baltimore, MD 21227

410-242-6500VIRGINIA

160 Kentmere CourtWinchester, VA 22603

540-722-3700

1345 Mountain Rd.Glen Allen, VA 23060

804-266-00004112 Holland Blvd.

Chesapeake, VA 23323757-485-3314

8450 Quarry Rd.Manassas, VA 20110

703-393-7344

2025 Cook DriveSalem, VA 24153

540-989-3750808 Norton Rd.

Wise, VA 24293276-328-8027

DELAWARE17941 Sussex HighwayBridgeville, DE 19933

302-337-3400NORTH CAROLINA3908 N. Graham St.Charlotte, NC 28206

704-509-2728

MCCLUNG-LOGAN EQUIPMENT COMPANY INC.R T- T- HC/CC- AT- BT

www.mcclung-logan.com

DOZIER CRANER T- T- HC/CC- AT- B T

www.doziercrane.com

155 Pine Barren RoadPooler, GA 31322

912-748-2684Fax: 912-748-5361


www.heavymachinesinc.comMemphis, TN • 800-432-8902Shreveport, LA • 800-548-3458

Gray, TN • 855-201-7453

CCS EQUIPMENT SALESwww.ccsequipment.com

Raleigh Durham • 877-469-3471

MAYHEAVY-EQUIP RENTAL & SALESwww.mayequip.com

Lexington, NC • 866-629-3784Columbia, SC • 888-865-1002

SCOTT-GALLAHER INC.www.scott-gallaher.com

8071 Lee Hwy. • Troutville, VA 24175540-992-4560

GROVE RIVERwww.groveriver.com902 Longwood Drive

Richmond Hill, GA 31324912-756-7854

Putters Participated on Four DifferentGreens, Top Teams Advanced to Finals the top team from each green advanc-ing to the Putting Championship. Thisyear’s championship team was KevinGesink of Water Valley InvestmentAdvisors Inc., in Sioux Center, Iowa,and Al Meyerdirk of SunSource inSpirit Lake, Iowa. The Contractors’ Shoot-Out started

immediately after the PuttingTournament. Eighteen contractors weredivided into six, three-person teams ina five-hole competition, with the high-est scoring team eliminated on eachhole. This year’s championship teamincluded: Ryan Grathwohl of ESS inColumbia, Mo.; Tom Giefer of KansasHeavy Construction LLC, in Shawnee,Kan.; and Derek Dilger of SmithPaving and Excavating Inc., inNorwalk, Ohio.Invitational activities began on

Wednesday morning with the golfersheading out to the courses in Ida Grove,Holstein, Mapleton and Odebolt for the

18-hole Scramble Tournament. A totalof 248 golfers participated in this year’sScramble Tournament.Champion teams were crowned

from each course and advanced to thethree-hole “Grand” Champion Shoot-Out in Ida Grove. The 2014 “Grand”Champion team was from theMapleton course and included JimHayward of GOMACO; RichardMichael of Turner-MichaelConstruction Co. in Grain Valley, Mo.;Andru Small of Terry Equipment inBloomington, Calif.; and Larry Berg ofWicks Construction in Decorah, Iowa.They finished their tournament with ascore of 56, which was 14 under par.The Ida Grove tournament champi-

on was the team of Tim Rife of LuxaConstruction in Blair, Neb.; GrantGodbersen of GOMACO; MurrayLodge of TOPCON PositioningSystems, Inc., in Livermore, Calif.; andKen Singer of Heavy EquipmentGuide magazine in Vancouver, British

Columbia, Canada. They finished theirtournament with a score of 61, whichwas nine under par.Winning the Holstein tournament

was the team of Andy Kvidera ofManatt’s Inc., in Brooklyn, Iowa;Skyler Luxa of Luxa Construction Co.in Blair, Neb.; Tom Farr of GOMACO;and Chad Hasert of PACEManufacturing Inc., in Brandon, S.D.They finished their tournament with ascore of 58, which was 12 under par.The champion team from Odebolt

included Tom Giefer of Kansas HeavyConstruction LLC, in Shawnee, Kan.;David Barthel of Faris Machinery inCommerce City, Colo.; Mike Norrad ofNorquip Supply Ltd. in Fredericton,New Brunswick, Canada; and TravisBrockman of GOMACO. They fin-ished their tournament with a score of63, which was nine under par.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

GOMACO from page 66

The SC&R Foundation has expanded its grant programfor individuals wishing to further careers related to the crane,rigging and specialized transportation industry through con-tinuing education courses or a voca-tional/technical program.Throughout the remainder of 2014,the foundation intends to award up toan additional $25,000 in grants on arolling basis.Going forward, grants will be

reviewed six times per year.Applications are being accepted nowfor the next grants, which will beannounced in September.In a departure from previous poli-

cy, these grants also are open to thepublic rather than limited to employ-ees or relatives of SC&RA membercompanies. This strategic change isamong a number of steps the foundation is taking to helpmember companies fill the industry’s labor shortage. Asalways, recipients must use the grants to take a continuingeducation course or attend vocational/technical programs

and enroll in courses such as welding or diesel mechanics,which are vital to companies in the industry. Awards typi-cally range from $1,000 to $5,000 each.

Previously this year, the founda-tion awarded grants totaling $5,000 tothree employees of SpecializedCarriers & Rigging Association(SC&RA) member companies.These awards were announced dur-ing the SC&RA Annual Conference,April 22 to 16, in Boca Raton, Fla.The foundation also plans to continueawarding annual scholarships to stu-dents working toward an undergradu-ate or graduate degree in preparationfor careers related to crane, riggingand specialized transportation. Thenext round of scholarships will openin September.

For more information, call 703/698-0291 or visitwww.scr-foundation.org.

(This story also can be found on Construction Equipment


Furthering Careers…

SC&R Foundation Expands Its GrantProgram to Award an Additional $25K

Previously this year,the foundationawarded grantstotaling $5,000…


> > >

Kennesaw, Georgia 30144www.kawasakiloaders.com

AN E.P.I.C. GENERATIONEFFICIENT

POWERFUL

INTELLIGENT

COMFORTABLE

Kennesaw, Georgia 30144www.kawasakiloaders.com

eor kilo

COWIN EQUIPMENT COMPANY, INC.

Birmingham, AL • 800-239-2694Mobile, AL • 800-223-6755

Montgomery, AL • 800-239-6642Madison, AL • 256-350-0006Huntsville, AL • 800-239-7368Oxford, AL • 800-917-7931Pensacola, FL • 800-239-4736Atlanta, GA • 800-849-3540

CLM EQUIPMENT CO., INC.www.clmequipment.com

Lafayette, LA • 337-837-6693Lake Charles, LA • 337-625-5942Baton Rouge, LA • 255-677-7838Houston, TX • 281-598-2500

GS EQUIPMENT INC.Tampa, FL • 866-586-8956

Ft. Lauderdale, FL • 954-327-8808Ft. Myers, FL • 239-334-6063

GREAT SOUTHERN CONSTRUCTION EQUIPMENTOrlando, FL • 407-859-9160

Jacksonville, FL • 904-268-4400

LINK-BELT MID ATLANTICAshland, VA • 866-955-6071Chesapeake, VA • 800-342-3248


FLINT EQUIPMENTCOMPANY

Albany, GA229/888-1212

Adairsville, GA770/773-9857

Atlanta, GA404/691-9445

Grovetown, GA706/855-5440

Columbus, GA706/687-3344

Macon, GA478/788-1586

Brunswick, GA912/264-6161

Savannah, GA912/964-7370

Troy, AL334/566-4181

Dothan, AL334/794-8691

West Columbia, SC803/794-9340

Simpsonville, SC864/963-5835

Aynor, SC843/358-5688

Ladson, SC843/572-0400

Andrews, SC843/221-4940

Walterboro, SC843/539-1420

DON ALLISON EQUIPMENT, INC.233 Melville Road Arley, AL 35541

800-669-6450205-387-1600

Fax: 205-387-1668


Introducing Kubota’s KX040-4 with EcoPlus Technology

www.kubota.comOptional equipment may be shown.©Kubota Tractor Corporation, 2013

Horsepower 42.4

Operating Weight (lbs.) 9,017

Maximum Digging Depth 11' 2.6"

Bucket Breakout Force (lbs.) 9,535

Tough on the job but easy on fuel, Kubota’s new KX040-4 compact excavator lets you switch between energy-saving and full-power mode with ease. Kubota’s original EcoPlus system gives you up to 9% fuel economy over standard mode for more cost efficient operation. Need power

plus economy? See the KX040-4 at your local Kubota dealership today.

GROWERS EQUIPMENT CO.2695 Davie RoadDavie, FL 33314954-916-1020

www.growersequipment.com

CHARLOTTE TRACTOR1700 Starita Road

Charlotte, NC 28206704-596-8900

www.charlottetractor.com

DITCH WITCH OF TENNESSEENashville

140 Charter PlaceLaVergne, TN 37027

615-793-7576www.ditchwitchtn.com

GREENSBORO TRACTOR2820 S. Elm-Eugene Street

Greensboro, NC 27406336-273-3606

www.greensborotractor.com

FUTCH’S TRACTOR DEPOT, INC.

8515 SR 207 N.Hastings, FL 32145

904-692-3673www.futchstractordepot.com

9775 W. Boynton Beach Blvd.Boynton Beach, FL 33472

561-369-0414F561-369-1282

www.floridacoasteq.com

15900 Westpark LaneFt. Pierce, FL 34945

772-461-1003F772-461-1007

694 Commercial Blvd.Naples, FL 34104

239-435-1667F239-435-9153

COASTAL EQUIPMENT SYSTEMS5287 New Kings RoadJacksonville, FL 32209

904-924-9624www.coastalequipmentsystem.com

FLORIDA COAST EQUIPMENT


Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine

(one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to:[email protected],

or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $95 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 24,273 ConstructionEquipment Buyers in the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

2007 Sennebogen 880R-HDwith approx. 5800hrs. For Sale or RentCall Turner Fabian (843) 991-9220 21 RM

“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 3500 models of construction equip. PNEUMATIC AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Summit Supply LLC888-888-1248 • [email protected] 21-22 TM

The Easy Way To Advertise YourEquipment Valued At Less Than $1 MillionRun In Two Consecutive Issues For $95

2010 MK1 Broce Broom, 576 Hours, Located in Savannah......................................................................................$75,000

Call ASC (704) 494-8104 21 RM

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make andmodel.

Call McLaren 888-492-4230 20-21 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; trac-tion; tire protection; machine stability; self-cleaning; lessground damage; fully rebuildable; interchangeable shoetypes.

Call McLaren 888-492-4230 20-21 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, back-hoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cush-ioned ride; last 3 to 5 times longer than regular pneumat-ic tires; rims included; same day shipping; various tiresizes available.

Call McLaren 888-492-4230 20-21 DH

2008 70 Ton Liddell Drop Side Deck Lowboy Tri-AxleTrailer, Tandem Two-Axle Jeep, Two-axle Nitro Stinger withMotor ......................................................................$210,000

Sun Piledriving Equipment 302-539-7187 21-22 BB

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on

our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDSAIR COMPRESSORS

Compressors

Airman PDS185, CFMCompressor, Quiet, Efficient,Durable, good condition, 1950hours ................................$10,500.

480-695-0672

ASPHALT EQUIPMENT

Asphalt Cutters

Attachments InternationalASPHALT CUTTERSSEVERE SERVICE

HIGH SPEEDASPHALT CUTTER

Skid Steers, TLB, Loaders,

Excavators

14 Models Available

''24-48 hour shipping''

SPECIAL PRICING!

Call 218-863-6444www.attachmentsintl.comwww.attachmentsusa.com

Asphalt - Misc.

2007 Dynapac PL2000, 80 in., frontloading planer, good condition,3,000 hrs ........................$139,500.

847-437-8686

COMPACTION EQUIP.

Vibratory Compactors

2006 Vibromax/JCB VM75, Singledrum, 84 HP, 16,094 operating wgt.,68.9 drum width, 31,024 lb. force,pictures available, good condition,890 hours ........................$36,000.

Farm-Rite Equipment908-625-0697

Compaction - Misc.

2007 JCB Vibromax VM115D, 80'',25,000 lb. w/ pad foot & dozerblade, very good condition, 350hours ................................$77,900.

2007 Dynapac CA134, 54'', 12,200lb. single drum roller, excellent con-dition, 300 hours ..............$43,500.

847-437-8686

EXCAVATORS

Hydraulic Excavators

2007 Doosan DX420, S/N 5119,Excavator with shear hydraulics,Good condition, 5,943 hours ..................................................$120,000.

440-439-4000

2008 JCB JZ140, zero tail swingexcavator, includes bucket, goodcondition, 2,500 hours ......$73,500.

2007 JCB JS260, 60,000 lb. exca-vator includes bucket and quickcoupler, good condition, 1,375hours ..............................$139,900.

2005 JCB JS220, 50,000 lb. exca-vator includes bucket, quick couplerand thumb, good condition, 2,600hrs ....................................$88,900.

847-437-8686

Mini Excavators

2006 JCB 8080, 18,000 lb. miniexcavator w/ dozer blade, includesbucket, good condition, 2,300 hours..........................................$43,900.

847-437-8686

FORESTRY EQUIPMENT

Chippers

2010 Carlton 2012, HighHorsepower 12'', Very good condi-tion, 753.2 hrs ..................$27,500.

845-247-0206

FORKLIFTS

Rough Terrain Forklifts

JCB 930-4, Canopy, 4WD, 6000lbs. lift, 22 ft. clear view mast w/ 66''carriage & 48'' forks. Has warranty.250 hours., pictures available ..................................................$56,000.

908-625-0697

GENERATORS & GEN SETS

Generators & Gen Sets

MMD AMSDG-25S, 20KWGenerator, Towable 3 phase Diesel25KW, good condition, 4,000 hours............................................$9,750.

480-695-0672

LOADERS

Backhoe Loaders

2006 Allmand TLB 6235, 4WD, 33HP, good condition, 1220 hours ..............................................$19,995.

480-695-0672

2008 JCB 3CX-15, 15 ft. backhoew/ extendable dipper, backhoebucket included, very good condi-tion, 1,700 hours ..............$55,000.

847-437-8686

Skid Steer Loaders

2012 JCB 260, Cab, heat, 2-speed,foot throttle, general purpose buck-et, very good condition, 200 hours..........................................$33,000.

847-437-8686

Wheel Loaders

2008 JCB 426HT, 2.5 yd. wheelloader, 2.5 yd. bucket, good condi-tion, 1,000 hours ............$115,000.

847-437-8686

MATERIAL HANDLERS

Material Handlers

1999 Liebherr A932HD, S/N 5316,Material-Scrap Handler, Good con-dition, 17,968 hrs............$125,000.

440-439-4000

MISCELLANEOUS

Miscellaneous

Surplus Parts for SaleVarious Screener Parts & Mesh.

Conveyor Parts and Drives.Diesel/Hyd Powerpack.

Call 843-525-6140or visit

www.SandScience.com

Used Kolberg Sand ScrewAvailable

54" & 44" Single ScrewClassifier/Material Washer

Call 843-525-6140or visit

www.SandScience.com

RECYCLING EQUIPMENT

Screening Equipment

2000 Metso ST170 PortableScreener.

Heavy Duty Scalping Screen withonboard stacking conveyor. TrackMounted Chassis - Diesel/Hyd -

Runs Strong.Call 843-525-6140

or visitwww.SandScience.com

TRAILERS

Dump Trailers

Felling 6x12 Dump Trailer, 6000lb. capacity, 5hp Honda engine,good condition................$6,500.

480-695-0672

Trailers - Misc.

Wylie Express 500 Water Trailer,500 gallon, 4hp Honda engine, tan-dem surge brakes, good condition............................................$5,700.

480-695-0672


I NEED TO BUYCUMMINS KT19GENSET.CONTACT: IKRAM KHANPHONE: +92-333-555-5360EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR WELDING TRUCKCONTACT: JOSEPHONE: 347 3516853EMAIL:[email protected]––––––––––––––––––––––––––––––––USED KUBOTA92SV SKID STEER INGOOD SHAPECONTACT: GLENN, SIEVE CONSTRUC-TIONPHONE: 507-227-3780FAX: 507-736-2199EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY USED CATERPIL-LAR WHEEL LOADERS 920, 926, 930,936, 938F/G, 950B/C/E/F, 966C/D/E/F/H,980C/F AND 988B. IF YOU HAVE ANY,PLEASE OFFER ME WITH PICTURES,SERIAL NUMBER, CONDITION, LOCA-TION AND FINAL OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING TO BUY CATERPILLARWHEEL LOADER 930 BETWEEN 1980TO 1984CONTACT: MOHAMEDPHONE: 253-232-6772EMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEWOR USED SERVICE, SHOP, PARTS,OPERATOR’S OR OTHER MANUALSFOR EQUIPMENT OF ALL SORTS, BUTNOT INCLUDED TRUCKS AND VEHI-CLES. WE PREFER IN BULK, PERHAPSYOU HAVE COMPUTERIZED YOURSERVICE OR PARTS OPERATION ANDYOU HAVE BOOKS OR MANUALS YOUNO LONGER NEED, OR INVENTORIESYOU HAVE NOT SOLD. PERHAPS AS ADISCONTINUED PRODUCT LINE. WEWILL PURCHASE IN ANY USEABLECONDITION IN ANY AMOUNT YOUHAVE. PLEASE FEEL FREE TO CALLUS AT 270-849-2270 OR EMAIL US.CONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: [email protected]––––––––––––––––––––––––––––––––PILE HAMMERS | LOOKING TO BUYCLAMSHELL BUCKETS, GRAPPLES,PILE HAMMERS, WINCHES, HOISTS,CRANES & HOOK BLOCKS.CONTACT: GREGPHONE: 724-228-5560EMAIL: [email protected]––––––––––––––––––––––––––––––––TERRAMITE T5C USED 1990 THRU 2000,PLEASE CONTACT E MAIL ONLYCONTACT: C,B,BARKERPHONE: 910 564 4931FAX: NONEEMAIL: [email protected]––––––––––––––––––––––––––––––––

PILE HAMMERS | LOOKING FOR USEDVIBRATORY AND DIESEL HAMMERSAPE _ ICE _ J&MCONTACT: WILLIEEMAIL: [email protected]––––––––––––––––––––––––––––––––IT DD70, IR DD25, AND DEERE 410 2004AND UP | IR DD70, IR DD25, AND DEERE410 2004 AND UP BOBCAT S185 2010BOBCAT 325 BOBCAT 323 KOMATSUDOZERS PLEASE EMAIL ME ALL INFOCONTACT: MANSOOR MOLAIPHONE: +16303799175EMAIL:[email protected]––––––––––––––––––––––––––––––––WE WANT TO BUY CATERPILLAR DOZ-ERS D9N & D9R WITH RIPPERS.PLEASEOFFER US & KINDLY SEND USDETAILS, PICTURES & OFFER GOODPRICE.CONTACT: FAIZ KHANPHONE: +92-333-3298751EMAIL:[email protected]––––––––––––––––––––––––––––––––WE WANT TO BUY CATERPILLARWHEEL LOADERS 950B, 950E, 966E,966F.PLEASE OFFER US & KINDLYSEND ME DETAILS, PICTURES & OFFERGOOD PRICE.CONTACT: NAQIB KHANPHONE: +92-333-3298751EMAIL: [email protected]––––––––––––––––––––––––––––––––DROP DECK TRAILER | 53X102 DROPDECK AIR RIDE TRAILERCONTACT: JOHN MICHALKOPHONE: 262 889 1372EMAIL: [email protected]––––––––––––––––––––––––––––––––TRACTOR CAB | ENCLOSED USED CABTO FIT IHC 684.CONTACT: RONPHONE: 419-565-5429EMAIL: [email protected]––––––––––––––––––––––––––––––––VANAIR 80 VIPER | PORTABLE AIR 80CFMCONTACT: ANDYPHONE: 2316725139EMAIL: [email protected]––––––––––––––––––––––––––––––––COMMERCIAL LAWN MOWER 52 IN |COMMERCIAL LAWN MOWER WITHUNDER 200 HOURS AND A 52 IN SIZEDECK NEEDS TO BE A 2012 OR 2013CONTACT: [email protected]: 6315862225EMAIL: [email protected]––––––––––––––––––––––––––––––––TRACHOEEMAIL: [email protected]––––––––––––––––––––––––––––––––INTERNATIONAL TRI AXLE DUMPPAYSTAR 5000 5600 OR 5900 FROMCONTRACTOR 400 HP OR MORE | TRIAXLE DUMP CLEAN 400 HP OR MOREFROM CONTRACTOR.CONTACT: KEVINPHONE: 856-692-0027EMAIL: [email protected]––––––––––––––––––––––––––––––––

WE WANT TO BUY CAT WHEELLOADER 920, 926E, 936E, 950B, 950E,966D, 966E, 966F, 970F, 980C, 980F, 988BAND 988F IF YOU HAVE ANY FOR SALEPLEASE EMAIL US PHOTOS ANDDETAILS LOOKING FORWARD FORYOUR OFFERS.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING TO BUY CAT MOTORGRADER 12G, 140G, 14G, AND 140H IFYOU HAVE ANY FOR SALE PLEASEEMAIL PHOTOS AND DETAILS.CONTACT: STEVEPHONE: 713-659-0593FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––FIELD STRIPING MACHINE | LOOKINGFOR A AIRLESS FIELD STRIPINGMACHINECONTACT: RICKPHONE: 518 369 3296FAX: 518 371 0296EMAIL: [email protected]––––––––––––––––––––––––––––––––HYUNDAI 4503 | LINDI FINAL DRIVECONTACT: WILLIAM RENAUD JRPHONE: 207-384-5111FAX: 207-384-4809EMAIL:[email protected]––––––––––––––––––––––––––––––––WANT TO BUY NICE CRAWLERLOADER. LIVE IN WEST POINT GEOR-GIA 706 645 6704 OR CELL 7065019457CONTACT: CHARLES TRAMMELLPHONE: 7065019457EMAIL:[email protected]––––––––––––––––––––––––––––––––MINI EXCAVATOR 1200018000# | I NEEDTO PURCHASE A MINI EXCAVATOR FORMY GROWING BUSINESS.CONTACT: ADAMPHONE: 518-496-5020EMAIL: [email protected]––––––––––––––––––––––––––––––––

OLDER CAT 320 OR CAT 215, CAT 225 |SEEKING AN OLDER MODEL CAT 320 INTHE MID 1990 RANGE OR CAT 215/CAT225 OLD BUT IN OPERATING CONDI-TION. ONLY SEEKING ONE UNIT. CON-TACT ME VIA EMAIL ONLY WITH PHO-TOGRAPHS AND CONDITION INFORMA-TION.CONTACT: JEFF LAWSONEMAIL: [email protected]––––––––––––––––––––––––––––––––USED TIGER MOWER | DESCRIBEWHAT YOU WANT.CONTACT: CONTACT NAMEEMAIL: [email protected]––––––––––––––––––––––––––––––––WHEEL LOADERS | I AM LOOKING TOBUY USED CATERPILLAR WHEELLOADERS 920, 926, 930, 936, 938F/G,950B/C/E/F, 966C/D/E/F/H, 980C/F AND988B. IF YOU HAVE ANY, PLEASEOFFER ME WITH PICTURES, SERIALNUMBER, CONDITION, LOCATION ANDFINAL OFFER PRICE.

CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected] ––––––––––––––––––––––––––––––––AMCO VEBA 105 3S 5TON | NEW ORLIKE NEW CONDITION. TO BE MOUNT-ED ON A WORKBOAT.CONTACT: ROGER APPLEWHITEPHONE: 228-217-4135EMAIL: [email protected]––––––––––––––––––––––––––––––––LOADER FOR MASSEY 390 4WD | SEC-OND HAND LOADER TO FIT MASSEY390 4WDCONTACT: RICHARD FITZGERALDPHONE: 00353860437770EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT D6R AND D7R 9903 | WE ARELOOKING FOR D6R AND D7R 1999-2002.RUNNING CONDITION WITH PICTURES.THANKS.CONTACT: MICHAELEMAIL: [email protected]––––––––––––––––––––––––––––––––DYNAPAC CA12 AXLE | NEED REARAXLE FOR DYNAPAC CA12. WOULDPURCHASE ENTIRE NON-RUNNINGMACHINE.CONTACT: NEILPHONE: 320-763-4491EMAIL: [email protected]––––––––––––––––––––––––––––––––D9R | WE LOOKING FOR BULLDOZERD9R AND D9N MANUAL FROM 1988 UPTO 1997 WITH RIPPER SINGLE SHANKCONTACT: OUFIPHONE: 966530185141FAX: 9660127512024EMAIL:[email protected]––––––––––––––––––––––––––––––––SS RIPER FOR CAT D9N OR D9R | WEWANT TO BUY SS RIPPER FOR CATD9N OR D9R. THE RIPPER CAN BEUSED OR REBUILT IF WELL PRICED.CONTACT: TIAGO DONATOPHONE: (305) 909-9743EMAIL:[email protected]––––––––––––––––––––––––––––––––

CAT WHEEL LOADERS | WANTED TOBUY CAT WHEEL LOADER 936E, 950B,950E, 966D, 966F, 970F, 988B, AND 988FIN RUNNING OR NON RUNNING CONDI-TION IF YOU HAVE FOR SALE PLEASEEMAIL ME PHOTOS AND DETAILS.CONTACT: STEVEPHONE: 713-659-0593FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––CASE BACKHOE LOADER 580SK, 580L,580M AND 580SM | I AM LOOKING TOBUY CASE BACKHOE 580SK, 580SL,580L, 580SL, 580M AND 580SM IN ANYCONDITION IF YOU HAVE FOR SALEPLEASE CONTACT ME VIA PHONE OREMAIL.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––PAVER | LOOKING FOR BLAW-KNOX PF5510 OR PF3200, THE CLOSER TOWASHINGTON STATE, THE BETTER.THANKS!CONTACT: SANTIAGO SCARZELLAPHONE: 3055064263EMAIL: [email protected]––––––––––––––––––––––––––––––––TELESCOPIC FORKLIFT | 4-6 TON TEL-ESCOPIC FORKLIFT DIESEL 12-14M1999-2002 GOOD CONDITIONCONTACT: WILFRED OBENGSACKEYPHONE: 233264495065EMAIL:[email protected]––––––––––––––––––––––––––––––––TERRAMITE BACKHOE, USED | TER-RAMITE BACKHOE USED 4X4 DIESELOR GAS. 2003-4-6CONTACT: ALANPHONE: 903-681-2064EMAIL: [email protected]––––––––––––––––––––––––––––––––DIESEL TANK FOR TOWABLE INGER-SOLL RAND AIR COMPRESSOR | THISIS AN OLD, DETROIT MADE PORTABLEINDUSTRIAL AIR COMPRESSOR THATYOU TOW TO WORK SITE. NEEDREPLACEMENT DIESEL GAS TANK ANDCOMPANY DOES NOT STOCK PARTSTHIS OLD.CONTACT: RJPHONE: 801-597-7314EMAIL: [email protected]––––––––––––––––––––––––––––––––4400 GPM POSITIVE DISPLACEMENTPUMP | SECOND HAND POSITIVE DIS-PLACEMENT PUMP CAPACITY: 3300 -4400 GPM CAPACITY: 750 - 1000 M3/HRPRESSURE: 16 - 20 BAR PRESSURE:230 - 290 PSI TEMPERATURE: 60 CTEMPERATURE: 140 F VISCOSITY OFMEDIUM: 2115 CP MEDIUM: CRUDE OILLOCATION OF PLANT: MALAYSIACONTACT: SYAZWAN ELIASEMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 950B, CAT 950E | I AM LOOKINGFOR CAT WHEEL LOADERS 950E AND950B, PLEASE FEEL FREE TO CON-TACT ME, IF YOU HAVE AVAILABLE ORANY UP COMING UNIT. REGARDSROYAL MACHINERY TRADERSCONTACT: ROYAL TRADERS USA.

EMAIL:[email protected]––––––––––––––––––––––––––––––––NATIONAL CRANE BOOM SECTIONS |LOOKING FOR TELESCOPIC BOOMSECTIONS FOR A 880 SERIES NATION-AL CRANECONTACT: MIKE ACHTORPHONE: 847-782-0672FAX: 847-782-0673EMAIL:[email protected]––––––––––––––––––––––––––––––––20 FEET TRAILER WITH 10 TIRESCONTACT: VIJAYPHONE: 9444411691EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLARS DOZER D7H AND G |WANTED GOOD USED CATERPILLARSBULLDOZER D7H AND D7GCONTACT: GABRIEL FOTSOPHONE: 2027101655EMAIL: [email protected]––––––––––––––––––––––––––––––––GOOD USED SCHWING BOOM TRUCKS| SCHWING W/MACK TRUCK MOUNTEDCONCRETE BOOM TRUCKS 1994 &NEWER 32M TO 39METERCONTACT: WILLIAM CROSSPHONE: 407 595 8221FAX: 407 843 0136EMAIL:[email protected]––––––––––––––––––––––––––––––––544G MANUAL PEMBERTON QUICKCOUPLER | 544G / E MANUAL QUICKCOUPLER 544G 20.5 X 25 WHEELS ANDTIRES, WILL TRADE FORESTRY TIRESAND WHEELS.CONTACT: MICKPHONE: 352-400-5026EMAIL: [email protected]––––––––––––––––––––––––––––––––BANDIT254/WOODCHUCK | PREFERDIESEL AND GOOD WORKING CONDITIONCONTACT: CELIAPHONE: 1(806)665-4274FAX: 1(806)665-4275EMAIL:[email protected]––––––––––––––––––––––––––––––––KW DUMP TRUCKCONTACT: JOEL VANDER HEIDENPHONE: 563-357-6273EMAIL: [email protected]––––––––––––––––––––––––––––––––MUSTANG LOADER BUCKET | I AMLOOKING FOR A USED BUCKET WITHTEETH FOR MY 2003 MUSTANG MTL20LOADERCONTACT: MIKE IPSANPHONE: 703-675-3375EMAIL: [email protected]––––––––––––––––––––––––––––––––INTERNATIONAL TD8C POWER SHIFTTRANSMISSIONCONTACT: ROGERPHONE: 5706393058EMAIL: [email protected] ––––––––––––––––––––––––––––––––TRAIL KING BELL TRAILERSCONTACT: SALVADORPHONE: 575 317 1752EMAIL: [email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:

www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted


ALEX LYON & SON AUCTIONEERSwww.lyonauction.com315-633-2944�

• San Antonio, TXThurs.,�October�16,�2014For:�Late�Model�Rental�FleetEquipment

• Racine, WISat.,�October�18,�2014For:�Late�Model�Construction�&more

• Brooklyn, NYTues.,�October�21,�2014For:�Industrial�Equipment.�Partone�of�2�day�sale.

• Kissimmee, FLWed.,�October�22,�2014For:�Late�Model�RentalEquipment�&�more

• Wilkes Barre, PAThurs.,�October�23,�2014For:�Industrial�Equipment.�Parttwo�of�2�day�sale.

• Queretaro, MexicoFri.,�October�24,�2014For:�Late�Model�CATEquipment

• Bangor, MESat.,�October�25,�2014For:�Late�Model�Construction�&Rental�Fleet�Equipment

• Parkersburg, WVFri.,�October�31,�2014For:�Late�Model�OilfieldEquipment

• Columbus (Delaware), OhioSat.,�November�1,�2014For:�Late�Model�ConstructionEquipment�&�more

• Saginaw, MIWed.,�November�5,�2014For:�Land�Clearing�Equipment

• Port Huron, MIThurs.,�November�6,�2014For:�Major�Job�Completion

• Rochester, NYFri.,�November�7,�2014For:�Trucking�CompanyLiquidation

• Canastota, NYSat.,�November�8,�2014For:�Late�Model�ConstructionEquipment�&�more

• Cato (Syracuse), NYSun.,�November�9,�2014For:�Buses�and�LightConstruction�Equipment

• Houston, TXTues.,�November�11,�2014For:�Rentals!�Late�ModelConstruction�&�SupportEquipment�&�more

• Gary, INFri.,�November�14,�2014For:�Complete�LiquidationConcrete�&�General�Contractor

• Boston, MASat.,�November�15,�2014For:�Late�Model�SnowRemoval�&�ConstructionEquipment

• Waterloo, IAThurs.,�November�20,�2014For:�Complete�LiquidationEarthmoving�Equipment

• Manassas, VAFri.,�November�21,�2014For:�Late�Model�ConstructionEquipment�and�more

• Dallas, TXTues.,�December�2,�2014For:�Late�&�Great�Rental�FleetConstruction�Equipment

• Las Vegas, NVSat.,�December�6,�2014For:�Large�Rental�ReturnAuction

• Atlantic City, NJSat.,�December�13,�2014For:�Late�Model�Rental�Returns

• Albany, NYSat.,�December�27,�2014For:�Rental�Fleet�ConstructionEquipment�&�more

• Kissimmee, FLJanuary�31�–�February�8,�2015For:�22nd Annual�ConstructionEquipment,�Trucks�&�more

RITCHIE BROS. AUCTIONEERSwww.rbauction.com402-421-2631

• Sacramento, CAOctober�15,�2014

• Verona, KYOctober�16,�2014

• Chehalis, WAOctober�22,�2014

• Orlando, FLOctober�23,�2014

• Wessington Springs, SDOctober�23,�2014

• North East, MDOctober�28,�2014

• Hobbs, NMOctober�30,�2014

• Pittsburgh, PANovember�6,�2014

• Albuquerque, NMNovember�7,�2014

• Champaign, ILNovember�11,�2014

• Houston, TXNovember�12-13,�2014

• Boise, IDNovember�14,�2014

• New Braunfels, TXNovember�14,�2014

• East Brunswick, NJNovember�20,�2014

• Williston, NDNovember�20,�2014

AUCTION ADVISORSwww.auctionadvisors.com

888-243-3431�

• Hackettstown, NJMon.,�October�20,�2014For:�Liquidation�Auction�ofMajor�NE�Rigging�Company

BAR NONE AUCTIONwww.barnoneauction.com866-372-1700�

• Riverside, CASat.,�October�18,�2014For:�Public�Heavy�EquipmentAuction

• Portland, ORThurs.,�November�13,�2014For:�Public�Heavy�EquipmentAuction

BIG IRONwww.bigiron.com800-937-3558�

• ONLINE ONLYOctober�15,�2014



• ONLINE ONLYNovember�5,�2014




BLACKMON AUCTIONS, INC.www.blackmonauctions.com501-352-4703

• Wilburton, OKWed.,�November�5,�2014For:�Booth EnvironmentalAuction

• Van Buren, ARTues.,�November�11,�2014For:�Arklahoma PipelineAuction

CAT AUCTION SERVICESwww.catauctions.com866-750-9432�

• ONLINE ONLYWed.,�October�15,�2014For:�eQuipment Yard

• Questa, NMOctober�22-23,�2014For:�Complete MiningLiquidation

• Pittsburgh, PAThurs.,�October�30,�2014For:�Construction Equipment

• Las Vegas, NVFri.,�November�14,�2014For:�Construction Equipment

• Oklahoma City, OKTues.,�November�18,�2014For:�Construction Equipment

• ONLINE ONLYWed.,�November�19,�2014For:�eQuipment Yard

• Warner, NHFri.,�November�21,�2014For:�Construction Equipment

• Denver, COThurs.,�December�4,�2014For:�Construction Equipment

• Minneapolis, MNTues.,�December�9,�2014For:�Construction Equipment

• Lancaster, PAThurs.,�December�11,�2014For:�Construction Equipment

• ONLINE ONLYWed.,�December�17,�2014For:�eQuipment Yard

• Kissimmee, FLFri.,�February�13,�2015For:�Construction Equipment

DARELL DUNKLE & ASSOCIATESAUCTIONEERS INC.www.dunkleauctioneers.com800-433-6670

• Harrison, MIThurs.,�October�23,�2014For:�Construction Equipment,Trucks & Trailers

DAVIS AUCTIONSwww.davisauctionsinc.com203-758-4087

• Prospect, CTSat.,�December�13,�2014For:�Construction�Equipment

DON SMOCK AUCTION CO., INC.www.dsa-auctions.com765-778-9277

• Lucasville, OHSat.,�October�18,�2014For:�10th Annual�SouthernOhio�Consignment�Auction

• Rockford, ILFri.,�October�24,�2014For:�Northern�Illinois�&Wisconsin�ConsignmentAuction

EQUIFY AUCTIONS, LLCwww.equifyauctions.com888-535-8218

• Wills Point, TXNovember�6-7,�2014For:�2�Day�Auction�Event

HESS AUCTIONEERSwww.hessauctioneers.net866-511-2493

• Marietta, PAFri.,�October�17,�2014For:�Truck,�Trailer�&�EquipmentAuction

HILCO INDUSTRIAL, LLCwww.hilcoind.com877-37-HILCO

• ONLINE ONLYWed.,�November�5,�2014For:�City�of�Detroit�MajorMunicipal�Auction

I.R.A.Y. AUCTIONwww.iraymn.com320-968-7230

• Foley, MNFri.,�December�5,�2014For:�Heavy�ConstructionEquipment,�Truck�&�Trailer

IRON PLANET AUCTIONSwww.ironplanet.com888-433-5426

ONLINE AUCTIONSGo to www.ironplanet.com to viewthe complete auction schedules,inspection reports and to placeyour bid!





JEFF MARTIN AUCTIONEERS, INC.www.jeffmartinauctioneers.com601-450-6200

• ONLINE ONLYWed.,�October�29,�2014For:�Public�Surplus�LiquidationAuction

• Brooklyn, MSNovember�21-22,�2014For:�2�Day�Fall�Public�Auction

J.J. KANE AUCTIONEERSwww.jjkane.com855-GO2-KANE

• Dallas, TXThurs.,�October�16,�2014For:�Heavy�Equipment

• South Beloit, ILSat.,�October�23,�2014For:�Heavy�Equipment

• Boston, MAThurs.,�October�25,�2014For:�Heavy�Equipment

• Kansas City, MOThurs.,�November�6,�2014For:�Heavy�Equipment

• Philadelphia, PAThurs.,�November�8,�2014For:�Heavy�Equipment

• Charlotte, NCSat.,�November�13,�2014For:�Heavy�Equipment

• Portland, ORThurs.,�November�20,�2014For:�Heavy�Equipment

• Rome, NYSat.,�November�22,�2014For:�Heavy�Equipment

• Lansing, MIThurs.,�December�6,�2014

• Atlanta, GAThurs.,�December�11,�2014

• West Palm Beach, FLSat.,�December�13,�2014

MARTIN & MARTIN AUCTIONEERS, INC.www.mmaauction.com864-947-7888

• Easley, SCWed.,�October�15,�2014For:�One�Owner�AbsoluteAuction

• ONLINE ONLYOctober�20�-�27,�2014For:�Machine�Shop�Equipment,Pumps,�Tools,�Presses�&�more

• Pelzer, SCNovember�14-15,�2014For:�Construction�Equipment

MOTLEY’S AUCTION GROUPwww.motleys.com804-232-3300

• Chesapeake, VATues.,�October�28,�2014For:�Construction�Equipment�&Trucks

NORTH COUNTRY AUCTIONSwww.northcountry-auctions.com603-539-5322

• Wrentham, MASat.,�October�18,�2014For:�Construction�Equipment

NITKE AUCTIONSwww.nitkeauctions.com715-693-4447

• Wausau, WIOctober�24�-�25,�2014For:�49th Annual�ContractorsAuction

PETROWSKY AUCTIONEERS INC.www.petrowskyauctioneers.com860-642-4200

• Columbus, OHThurs.,�October�16,�2014For:�Area�Contractors�&Equipment�Dealers

• Newark, NJThurs.,�October�30,�2014For:�Heavy�ConstructionEquipment�&�more

• South Windsor, CTFri.,�November�7,�2014For:�Complete�Dispersal�–Folsom�Construction,�LLC

• Plaistow, NHNovember�14-15,�2014For:�Complete�Dispersal�–�S&RConstruction�Enterprises

PURPLE WAVE AUCTIONwww.purplewave.com866-608-9283

• ONLINE ONLYTues.,�October�21,�2014For:�Truck�&�Trailer�Auction

• ONLINE ONLYThurs.,�October�23,�2014For:�Construction�Equipment

• ONLINE ONLYThurs.,�November�6,�2014For:�Construction�Equipment

• ONLINE ONLYThurs.,�November�20,�2014For:�Construction�Equipment

SCOTT PERRY & CO.www.scottperryco.com716-283-7653

• Savona, NYWed.,�October�29,�2014For:�NYS�Dept.�ofEnvironmental�Conservation

• North Syracuse, NYThurs.,�October�30,�2014For:�NYS�Dept.�ofTransportation

• Pittsford, NYWed.,�November�5,�2014For:�NYS�Dept.�ofTransportation

• Batavia, NYThurs.,�November�6,�2014For:�NYS�Police�–�Troop�“A”

• Canandaigua, NYThurs.,�November�6,�2014For:�NYS�Police�–�Troop�“E”

• Newark, NYFri.,�November�7,�2014For:�NYS�Office�for�PeopleWith�Developmental�Disabilities�

SHETRON AUCTIONSwww.shetronequipment.com717-532-8828

• Shippensburg, PAFri.,�October�31,�2014For:�Construction�&�FarmEquipment

• Shippensburg, PAFri.,�December�19,�2014For:�Construction�&�FarmEquipment

UTILITY AUCTIONSwww.utilityauctions.net�302-530-9103

• Wilmington, DEFri.,�October�24,�2014For:�Construction,�Utility�&Forestry�Equipment

WAYNE PIKE AUCTION COMPANYwww.waynepikeauction.com763-389-5700

• Princeton, MNSat.,�December�6,�2014For:�Heavy Equipment

YODER & FREY AUCTIONEERS, INC.www.yoderandfrey.com419-865-3990

• Berlin Center, OHTues.,�October�21,�2014For:�Construction Equipment,Trucks & Trailers

• Darlington, PAThurs.,�October�23,�2014For:�Construction Equipment,Trucks & Trailers

• Kissimmee, FLFebruary�9-16,�2015For:�41st Annual – 7 dayAuction

AuctionsComingTo view information on upcoming auctions visit our

Auction Calendar at www.constructionequipmentguide.com


BUY ONLINE

The new way to buyused equipment

Visit allEquip.com or call 855-827-1515

2006 Mitsubishi FG25N Pneumatic Tire Forklift – $10,500

2003 Bobcat S185 Skid-Steer Loader – $14,500

2007 Bobcat 325G Mini Excavator – $15,900

2005 JLG E450AJ Electric Articulating Boom Lift – $20,900

2007 Skytrak 6042 Telehandler – $24,500

2007 Case 580M Series 2 4x4 Backhoe Loader – $33,900

2005 JLG 1930ES Electric Scissor Lift – $4,000

Excavators | Landscape Equipment | Generators | Trenching Equipment | Sweepers/Scrubbers | and much more!

Low, no-haggle pricing. Inspected. Ready for work. Guaranteed.

e TTelehandler – $24,500

2007 Skytrak 6042elehandler – $24,500

2005 JLG 1930ESElectric Scissor Lift – $4,000

2005 JLG 1930ESElectric Scissor Lift – $4,000

2007 Case 580M Series 2 4x4Backhoe Loader – $33,900

2007 Case 580M Series 2 4x4Backhoe Loader – $33,900

2006 Mitsubishi FG25Ne For Pneumatic Tir e

2006 Mitsubishi FG25Ne Forklift – $10,500

2003 Bobcat S185Skid-Steer Loader – $14,500

2003 Bobcat S185Skid-Steer Loader – $14,500

2007 Bobcat 325GMini Excavator – $15,900

2007 Bobcat 325GMini Excavator – $15,900

2005 JLG E450AJ ElectricArticulating Boom Lift – $20,900

2005 JLG E450AJ ElectricArticulating Boom Lift – $20,900

ed arEquipment featur

Excavators | Landscape Equipment | Generators | T

esentation of items available on allEquip. Items arepre a red ar

Excavators | Landscape Equipment | Generators | T

e sold and added to inventory dailyesentation of items available on allEquip. Items ar

enching Equipment | Sweepers/Scrubbers | and much morrExcavators | Landscape Equipment | Generators | T

e sold and added to inventory daily

isit V allEquip.com

enching Equipment | Sweepers/Scrubbers | and much mor

.

allEquip.com or call 855-827

e sold and added to inventory daily

enching Equipment | Sweepers/Scrubbers | and much mor

5151- 855-827

e!enching Equipment | Sweepers/Scrubbers | and much mor


GANDY from page 1

Work to Include Overpasses, Pedestrian, Bicycle Routes

Phase One of a two-phase project to transform the entire stretch of Gandy Boulevardfrom just east of Fourth Street N in St. Petersburg to just west of U.S. 19 in Pinellas Parkbegan in January 2014.

major evacuation route for Pinellas County residents in the event of a hurricane. FDOTestimates 46,000 vehicles use this 2-mi. stretch of road each day, and the stop-and-gotraffic demonstrates the need to relieve congestion along the east-west corridor.

Overpass OverviewFinanced by federal and state funding to the tune of $83 million, this phase focuses

on the section from Fourth to Interstate 275. When work is completed, in addition to theelevated roadway, overpasses will be built at Fourth, Roosevelt Boulevard, King and94th Avenue, with a frontage road system parallel to the main roadway. Other featureswill include pedestrian and bicycle routes along the corridor, lighting, stormwater facil-ities, signalization, landscaping and various advanced communications technologies aspart of an “intelligent transportation system.” Sidewalks also will be built so drivers andcyclists can safely pass through the area, and ponds will be dug to provide for run-off.The general contractor is a joint venture between Miami-based Condotte America

and de Moya.Work began in January 2014 with tree clearing and utility relocation along the medi-

an. “That will continue for a while,” said Marty Sanchez, senior project engineer ofGenesis CEI/consultant of the Florida Department of TransportationSanchez said coordination of utility relocation has been a challenge.After extensive earth moving, Sanchez said foundation recently began. “There’s a lot of equipment involved: cranes, loaders, track hoes — a lot of dirt-mov-

ing equipment.”

SchedulingCrews are currently working in the existing wide median, Sanchez said, but as work

progresses, intermittent lane closures will be necessary along Gandy, King, Rooseveltand Fourth at night.For lane closures during peak hours, three lanes in each direction will be open

between I-275 and King and two lanes in each direction from King to east of FourthStreet. Temporary detours are coming, Sanchez advises, especially when crews beginworking overhead. Most detours and lane closures, however, will occur during night andweekend hours.As part of FDOT’s outreach, they hosted a construction open house this summer to

present more information about the project to the public.

Wider ViewAlthough there have been no issues with Phase One, not all of the public is on board

with Phase Two of the 12.6-mi. Gandy Freeway project intended to provide fasteraccess to and from gulf beaches. According to the Tampa Bay Times, business ownersand public officials became angry about a state proposal to raise an intersection onGandy Boulevard because they believed it would negatively impact business.The second phase, a 1.6-mi. stretch west from I-275 to the end of the Gandy overpass

over U.S. 19, has not been funded, but is estimated to cost $49.6 million. Constructionis not scheduled to begin until 2021. Included in this segment is the Gandy-Grand inter-section.FDOT had proposed replacing a ground-level intersection at Gandy Boulevard and

Grand Avenue with an elevated interchange. This intersection is one of the mainentrances to the Gateway Business Centre, which has been heavily developed in recentyears, with new apartments and businesses, particularly on the Pinellas Park side.Under the original proposal, drivers heading west would go up the overpass at Grand,

come down to ground level and then go back up the existing overpass that crosses U.S.19 — a kind of roller coaster effect.Locals feared a repeat of what happened to a once-thriving shopping center at near-

by U.S. 19 and 110th Avenue N, when several businesses closed because a new elevat-ed interchange made it too difficult for customers to access them. Other concerns includ-ed losing tax revenue and safety due to expectations of vehicles merging and travelingat a higher rate of speed. FDOT cancelled plans for the elevated interchange; the inter-section will remain at grade.The expected completion date for phase one is spring 2017. Sanchez said work is on

schedule and proceeding without issue, unhindered by either weather or environmentalimpact issues. “It’s not cookie-cutter, but it’s nothing the DOT hasn’t done before,” Sanchez said.(This story also can be found on Construction Equipment Guide’s Web site at

www.constructionequipmentguide.com.) CEG


TERMS: Complete payment or a minimum requirement of 20% deposit day of sale in Cash, Certified Check or Guaranteed Funds. Balance due within 4 days. Ohio Lic # 2002000176, Ohio Firm #2002000177, NH Lic #2966ONLINE BIDDING THROUGH EQUIPMENTFACTS

CALL FOR INFORMATION AND PICTURE BROCHURES.

Salt Lake City, UT (801) 355-4500 Columbus, OH (614) 444-4300Wharton, NJ (973) 659-3330 Providence, RI (401) 455-0200Milford, NH (603) 672-4100 Boston, MA (617) 427-8888

275 Route 32, North Franklin, CT 06254, (860) 642-4200, Fax: (860) 642-7900www.petrowskyauctioneers.com

UPCOMING AUCTIONSPUBLIC EQUIPMENT AUCTION with equipment from

THE SHELLY COMPANY & COMPANY WRENCH & AREA CONTRACTORS & EQUIPMENT DEALERS

FULL INVENTORY OF EARTHMOVING, SITE DEVELOPMENT & PAVING EQUIPMENT, DEMOLITION & SCRAP HANDLING EQUIPMENT, SERVICE & MIXER TRUCKS, TRAILERS & FLEET VEHICLES

PARTIAL LISTING: EXCAVATORS: SCRAP & MATERIAL HANDLERS: CRAWLER TRACTORS & LOADERS: RUBBER TIRED

LOADERS: TRACTOR LOADER BACKHOES: SIDE BOOMS: SKID STEERS: ROAD MILLERS & PROFILERS: PAVING

EQUIPMENT & ROAD WIDENERS: CRUSHING & SCREENING: COMPACTORS & ROLLERS: HYD HAMMERS: MAGNETS:

GRAPPLES: BUCKETS & ATTACHMENTS: MULTI AXLE & S/A DUMPS: DISTRIBUTOR TRUCKS: MIXER TRUCKS: SERVICE

& UTILITY TRUCKS: FLATBED & VAN BODY TRUCKS: CAB & CHASSIS: TRAILERS: TANK TRAILERS: WATER TRUCKS:

FLEET VEHICLES: UTILITY VEHICLES: WELDERS: TRENCHER: SWEEPER & BROOM TRACTORS: FORKLIFTS:

EQUIPMENT & TRUCK PARTS & COMPONENTS: SUPPORT EQUIPMENT & TOOLS: AND MORE!

PUBLIC EQUIPMENT AUCTION for SCHIAVONE CO., LLC – EQUIPMENT DIVISION & JOINT VENTURES(Multiple Job Completions)

HEAVY CONSTRUCTION, INFRASTRUCTURE REHAB EQUIPMENT, TRUCKS & TRAILERS, HUGE INVENTORY OF JOB SITE SUPPORT EQUIPMENT, TOOLING & SUPPLIES

Consignments from Schiavone affiliates & joint ventures only!

ONE OWNER – COMPLETE DISPERSAL AUCTION for FOLSOM CONSTRUCTION, LLC (Due to Owner’s Untimely Passing)

THE FINEST ONE OWNER INVENTORY OF HEAVY EQUIPMENT, TRUCKS & TRAILERS EVER SOLD AT PUBLIC AUCTION FROM ONE OF CT’s PREMIER CONTRACTING FIRMS

ONE OWNER – 2 DAYSCOMPLETE EQUIPMENT & ROLLING STOCK DISPERSAL AUCTION for

S&R CONSTRUCTION ENTERPRISES (Owners Pursuing Other Interests)

ONE OF NH’s MOST VENERABLE & REVERED CONTRACTING FIRMSENTIRE INVENTORY OF HIGHWAY, BRIDGE CONSTRUCTION & INFRASTRUCTURE,

MAINTENANCE EQUIPMENT, TRUCKS, TRAILERS, TOOLS & SUPPLIES SALE FEATURES - 2010 Yutong YTRD 280 Rotary Drill

Mtd On Cat 336D Track Unit, Multiple Kelly Bars & Bits

THURSDAY, OCTOBER 16, 9:00 AM 700 HART ROAD, COLUMBUS, OH 43223

THURSDAY, OCTOBER 30, 9:30 AM 2121 MCCARTER HWY, NEWARK, NJ 07104

FRIDAY, NOVEMBER 7, 9:00 AM 138 RYE STREET, SOUTH WINDSOR, CT 06074

FRIDAY & SATURDAY, NOVEMBER 14 & 15, 9:30 AM BOTH DAYS121-123 NEWTON ROAD, PLAISTOW, NH 03865


Phone: (315) 633-2944 • Fax: (315) 633-8010

Syracuse, NY (Evenings) (315) 637-8912

www.lyonauction.com

Sales Managers & Auctioneers, Inc.

ALEX

LYON& SON

WEDS., OCTOBER 22 @ 10:00 A.M.

NOTE: This Auction will consist of late model rental fleet equipment from severalnational rental fleets.

HILITES: 4 ARTICULATED HAUL TRUCKS: Cat 730, 2007 Volvo A40E, 2005Volvo A40D, 2007 Volvo A25D, 12 HYDRAULIC EXCAVATORS: 2006-2005 Cat345CL, Cat 345BL-II, 2010 Cat 320DL, Cat 312CL, Cat 225, Komatsu PC138LC-2,2007 Komatsu PC50MR-2, Kobelco SK210LC, Hitachi ZX350, JD 160LC, RUBBERTIRED EXCAVATOR: Cat M316C, 2 EXCAVATOR THUMBS: (2) NewTomahawk, 2 MOTOR GRADERS: 2011 Cat 120M, Cat 12F, 4 RUBBER TIREDLOADERS: 2010 Komatsu WA500-6, 2012 Cat 972K, Cat 966F, Cat 926, 12 CRAWLER TRACTORS: Cat D8R, CatD8N, 2006 Cat D7RLGP-II, 2012 Cat D6TCL, 2011-2008 Cat D6TLGP, 2011 Cat D6NLGP, Cat D6NLGP, 2008 CatD6KLGP, Cat D5GXL, 2005 Cat D5GLGP, 2006 Komatsu D155AX-6, 5 TRACTOR LOADER BACKHOES: Cat420D (4x4), (2) 2012 Cat 416E (4x4), 2006 JD 310G (4x4), JD 310G (4x4), 3 SOIL COMPACTORS: Cat 825B, Cat815F, Cat 815B, 4 VIBRATORY ROLLERS: (2) 2010 Bomag BW211D (cab), Cat CS433E, Cat CP433C, 2 RUBBERTRACKED SKID STEERS: 2007 Cat 297C, Bobcat T300, 3 TELESCOPIC FORKLIFTS: (3) 2006 Terex TH636C,BOOM LIFT: 2006 JLG 800AJ (4x4), 5 SCISSOR LIFTS: 2007 Skyjack SJ8831RT (4x4), (2) Skyjack SJIII3220, 2008Skyjack SJIII3219, 2007 JLG 1930ES, 7 AIR COMPRESSORS: 2007-2006 IR HP750WCU, 2007 IR HP375WIR, 2006IR HP375WCU, (3) 2010 Atlas Copco 185CFM, GENERATOR: 2008 MQ DCA70USI, SCREENING PLANT:Powerscreen Chieftain, TROMMEL SCREENING PLANTS: 2014 American Victory 47, BOOM TRUCK: 2006 Intr’l4200 (17T), WATER TRUCK: Int’l 4200, STEAM CLEANER TRUCK: 1998 Int’l. 4700, 2 SERVICE TRUCKS:2002 Int’l., 1995 Freightliner, 3 DETACHABLE GOOSENECK TRAILERS: (3) 2015 Witzco RG50 (tri), 11 CON-TAINERS: (5) 40ft., (6) 20ft., 3 AIR DRYERS: 2010 Hankison RDH1550G, 2006 Airtek TW1500, Airtek TW1500,GOLF CART: 48 Volt Yamaha, 3 RECREATIIONAL VEHICLES: (2) New 110 CC 4 Wheeler, New Elec PowerWheel, TIRES: (4) 11R22.5 Tires, 2 PRESSURE WASHERS: (2) New Easy Kleen, 11 SURVEY EQUIPMENT: (3)New King Products Heavy Duty Aluminum Tripod, (3) New King Products Carbon Fiber GPS Antenna Rod, (3) New KingProducts Aluminum Thumb Release Bipod, (2) New King Products Aluminum Quick Change Prism Pole, ATTACH-MENTS: Crawler Tractor (7 winches – all fit D8s): (3) Cat W12E, Cat W6F, (4) Cat W8L, Skid Steer: (2) NewTomahawk 78in. Snow & Mulch Bucket, (2) New Tomahawk 72in. Rock Bucket, (2) New Tomahawk 72in. SmoothBucket, (2) New Tomahawk 66in. Brush Grapple (one cylinder), (2) New Tomahawk 66in. Smoother Bucket, (2) NewTomahawk 66in. Grapple Bucket (one cylinder), (2) New Tomahawk Stump Bucket, (6) New Tomahawk 42in. ForkFrame, (4) New Tomahawk HD Hay Spear, (10) New Tomahawk Quick Attach Mount Plate, NEW SUPPORT EQUIP-MENT: New Mustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, New Huskie 11218SDSHammer Drill, New Huskie B65 Jack Hammer, New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact WrenchKit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening Welding Helmet, New3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer AirHose, New Discharge Water Hoses, New Stiff Neck Pintle Hitches, 18 SUPPORT EQUIPMENT: (3) Makita 18 V 2 PCCordless Combo Kit, (2) 4 Tires, (2) Makita 18 V LXT Lithium-Ion Cordless Reciprocating Saw, (3) 3/8in. AutomaticGoodyear Air Hose Reel, (2) 10 PC Jumbo Combo Wrench Set, (2) 35,000 BTU MR. Heater Propane, 3 ½ Ton Magic Lift,200 AMP Roll Around Battery Charger, (2) Makita 18 V Compact Li-Ion Impact Driver, 2007 MQ MVH306GH, (2) 2005MQ MVH200GH, (2) High Ceeling Storage Building, Heavy Duty Work Bench.

Address: 12601 State Rd. 545 North (Avalon Rd.), Winter Garden, FL 34787.

DIRECTIONS: From Tampa: I-4E to Rte. 27N for 6.5 miles to Rt. 192E for 1 mile. Left on Avalon Rd. for 3 miles to sale site onleft. From Orlando: I-4W to Rt. 192W for 5.5 miles, turn right on Avalon Rd. to sale site.

LICENSE: #AU 0001548, FLORIDA LICENSE: #AB-1091.SALE SITE PHONE: (407) 239-2700, (770) 537-7386, FAX: (407) 239-0068.

KISSIMMEE (WINTER GARDEN),FLORIDA

LATE MODEL RENTAL CONSTRUCTIONEQUIPMENT,AERIAL LIFTS, FORKLIFTS,SUPPORT, ATTACHMENTS, TRAILERS,

TRUCKS & CONTAINER AUCTION

AUCTIONHERTZ EQUIPMENT

RENTALS

NEFF RENTALS


To view our Business Calendar online, go to www.constructionequipmentguide.com.

Ohio Aggregates & Industrial Minerals Association (OAIMA) Storm Water Inspection Training EventDate: October 15, 2014Time: 11 AM to 2 PMCivil & Environmental Consultants (CEC)Scioto Country Club, Columbus, OHSpeakers include CEC Training/overview of the inspectionprocess by Harry Kalipolits of the Ohio EPA. For more infor-mation, call toll free: 1-888-598-6808.

SAVE THE DATES!!!CRC CANADA – The 4th Annual CRC Canada Returns toEdmonton this Fall DATES: OCTOBER 20-21, 2014The Crane & Rigging Conference (CRC) Canada will return tothe Marriott at River Cree Resort, Edmonton, Alberta on October20-21, 2014. Now in its fourth year, the event will stay at thelocation of the 2013 conference which received rave reviewsfrom attendees. CRC Canada 2014 will be supported byIndustrial Training International (ITI) Canada ULC, EventPartner; Liebherr-Canada Ltd., Associate Sponsor; and Crane &Hoist Canada, Media Partner. Additionally, organizerMaximum Capacity media has confirmed that the CanadianHoisting & Rigging Safety Council (CHRSC) will again partici-pate as a Supporting Organization. REGISTER NOW!!!For more information on this event, you may contact CRCCanada direct at 888/608-0330.

AGC OF MINNESOTAEmployment & Labor Law Conference for ManufacturersJoin us for a fast-paced ½ day conference on current employ-ment and labor law issues that affect manufacturers. All topicsof this conference will address both MN & WI laws.Event Details:DATE: WEDNESDAY, OCTOBER 22, 2014TIME: 12:00 NOON to 5:30 PMLOCATION: Radisson Hotel Duluth; 505 W. Superior Street,Duluth, MN LUNCH: Buffet Lunch SOCIAL HOUR: Appetizers and Two Hosted Drinks Per PersonCOST: $20 Per PersonFor Questions or Special Needs: Please Contact: Steph Davis at [email protected] or call877/330-2632

Mark Your Calendar for GIE+EXPO 2014 - OCTOBER 22 to OCTOBER 24, 2014WEDNESDAY, OCT 22 – FRIDAY OCTOBER 24Green Industry Conference and School of GroundsManagementWEDNESDAY, OCT 22Dealer Day; Reception on the Tradeshow Floor and FreeConcert at 4th Street Live!THURSDAY, OCT 23GIE+EXPO open to all industry participants, plus Free Concertat 4th Street Live!FRIDAY, OCT 24Indoor – 9 AM to 5 PM and Outdoor – 9 AM to 4 PM, plus FreeConcert at 4th Street Live!Excellent timing for manufacturers to show their complete newlines…750 Exhibits throughout 500,000 sq. ft. inside theKentucky Exposition Center and in the turf area outside…19acres of outdoor demonstrations and test driving, adjacent tothe indoor exhibits…seminars to boost your efficiency and bot-tom line…convenient mid-America location within driving dis-tance of 60% of America’s population…Networking opportuni-ties. For more information, email: [email protected].

AGC OF MINNESOTAMN CONSTRUCTION CREW – 2nd ANNUAL INFO EXPODATE & TIME: Tuesday, October 28th at 9:00 AM to 12:00 PMLOCATION: Carpenters Union Hall

710 Olive Street, Saint Paul, MNWebsite: www.northcoutnrycarptenter.orgPURPOSE: To provide access and information about trainingopportunities and upcoming projects in the construction indus-try. This event will focus on how people can get trained for spe-cific skills and trades even if it is preparing within their currenttrade. Contractors will also be available to discuss with atten-dees information about large projects that will be starting in thenext 1-2 years. If you have any questions or need additional information,please email: [email protected] you for your continual support in this outreach initiative!!!

AGC OF MINNESOTAHealth Care Reform Seminar: A Refresher Course and aPrimer on New Reporting Requirements – OCTOBER 30, 2014at the Radisson Hotel, Roseville, MN

Ready or not, health care reform is kicking into full gear foremployers in 2015. Now is the time to make sure your com-pany is ready to report. Join us for a “walk” through the newforms, with lots of opportunities to ask questions. Everyone inyour firm who has responsibility for insurance or employeebenefits should attend this seminar. Presenter: Monica Kelley, Esq., Gray Plant MootySeminar: 7:30 AM to 9:30 AMRegistration Fee: $25 per person (includes breakfast)Register: Online at www.agcmn.orgQuestions??? Contact Denise Woods, 651/796-2186 or [email protected]

TRIMBLE DIMENSIONS 2014 IS THE PLACE TO BE IN NOVEMBER. REGISTER NOW!NOVEMBER 3 thru 5, 2014 LAS VEGAS, NEVADATrimble Dimensions User Conference 2014 is the must attendconference for industry professionals such as yourself.Haven’t attended in the past? Well, here’s what you’ve beenmissing! . Over 400 sessions lead by industry experts. Pavilion with the latest technology showcased. Unlimited networking opportunities. Peer-to-peer collaboration. Professional Development House (PDH). Hands-on training. Special events – plus more!Dimensions 2014 is the place to be in November. Discoverfirst-hand how you can transform the way you work by inte-grating advanced positioning technology, field and officeapplications and real time communications.For more information, contact: www.TrimbleDimensions.comor Email: [email protected].

AGC OF MINNESOTACONSTRUCTION FINANCIAL MANAGEMENT CONFERENCENOVEMBER 5 THROUGH 7, 2014 IN LAS VEGAS, NEVADAThe AGC/CFMA Construction Financial Management Conferencewill be held on November 5 – 7, 2014 in Las Vegas, Nevada.Get the latest information on: Construction Market Trends;Financial Accounting Standards Board; Surety, Financial, andCredit Markets, Change Order and Claims Management;Federal acquisition regulations; construction taxes; strategiesfor economic conditions; business real estate management;ethics and fraud. Register before September 5th: $780/AfterSeptember 5th: $860. Conference Details are available athttp://meetings.agc.org/agc _cfma.

Ohio Aggregates & Industrial Minerals Association (OAIMA)OAIMA 2014 Annual Meeting & Trade ShowHilton Columbus Hotel, Easton Town Center, Columbus, OhioDates: November 13-14, 2014Hotel Information: Hilton Columbus Easton3900 Chagrin DriveColumbus, Ohio 43219Telephone: 614/414-5000

AGC of MINNESOTASAVE THE DATES!!!. December 4th – Presidents/Holiday Reception, MinnesotaHistory Center, St. Paul. December 11th – AGC/MnDOT Grading and BaseTechnology ForumThe Minneapolis Boulevard Hotel, Brooklyn Center

. January 15th – 95th Annual meeting, Minneapolis MarriottSouthwest, MinnetonkaDETAILS of each will be available over the coming weeks!

CRC/ICHC 2014Crane & Rigging Conference / Industrial Crane & HoistConferenceDATES: December 3 – 4, 2014 LOCATION: Hilton Houston Nasa Clear Lake Hotel, Houston, TXThe event will be held adjacent to the Space Center Houstonand NASA’s Johnson Space Center. CRC/ICHC (Crane andRigging Conference/Industrial Crane and Hoist Conference) isan independent conference which offers education and net-working opportunities for safety and risk managers, crane andrigging supervisors, lift directors, project managers, and othersresponsible for managing crane and rigging operations in con-struction and heavy industry. More than just a lecture-styleconference, CRC/ICHC offers attendees opportunities for net-working in small groups, experiencing hands-on learning, andthe chance to visit vendors during exhibit hours.Who Attends? Typical attendees include contractors, engineer-ing firms, various construction user groups, unions, and craneand rigging professionals. The conference sessions are gearedfor safety and risk managers, crane and rigging supervisors,fleet managers, and small business owners. To submit a speaker proposal, go tohttps://maxcapmedia.wufoo.eu/forms/crcichc-2014call-for-speakers/. For more information on exhibiting, contact MarkBridger, [email protected].

BusinessCalendar

MOTLEYS INDUSTRIALA Division of Motleys Asset Disposition Group 804-232-3300 EXT. 4

For complete terms & conditions, visit:

FEATURING Assets from Financial Institutions, Contractors & Others.

ASSETS Include Excavators, Dozers, Loaders, Road Tractors, Dump Trucks, Services Trucks, Pickups, Autos & More!

ON-SITE & LIVE ONLINE BIDDING SALE LOCATION: 1120 Jolli� Road, Chesapeake, VA 23321

PREVIEW DATES: Monday - Friday, Oct. 20 - 24, 9 AM - 4 PMMonday, Oct. 27, 8 AM - 5 PM

Onsite buyers will register with Motleys sta� upon arrival. All Internet Buyers must register online.

CONSTRUCTION EQUIPMENT & TRUCKS

TUESDAY, 10/28 @ 9 AM

UPCOMING AUCTIONCHESAPEAKE, VA

Accepting Quality Consignments Thru 10/23

Financing NowAvailable!

PRIVATE TREATY SALEVac-Cons, TV Vans, Hydroblasters, Trucks, Equipment & Much More!

OR BUY IT NOW!

MOTLEYS

LET US HELP TURN YOUR ITEMS INTO CASH! We are now accepting items for our upcoming auctions! Sell your items with Motleys and get Top Dollar Competitive Results through our international advertising campaign and live online bidding.


ONE OWNER AUCTIONS(16) DOZERS, (15) EXCAVATORS, PIPELINE, OILFIELD, TRUCKS, LOWBOYS, MORE

BL A C K M O N AU C T I O N S, IN C.Established in 1938

www.blackmonauctions.com PO Box 7464, Little Rock, AR 72217 501-352-4703

BO O T H EN V I R O N M E N T A L - NO V E M B E R 5 - WI L B U R T O N, OK L A H O M ABackhoes(4) Caterpillar 420 BackhoesCompactors1996 Bomag BW213PDB Compactor 2007 Sakai SV510T-II Compactor 2001 Caterpillar CS-563D CompactorCranes2001 Terex RT230 Rough Terrain Crane Terex CD225 Rough Terrain Crane

Dozers(3) 2007 - 2002 Caterpillar D6R Dozers2002 Caterpillar D6M XL Dozer2000 Caterpillar D8R DozerMulcher2009 Terex PT100 RT w/Tushogg Mulch Head Loaders2005 Komatsu WA320 Wheel Loader (2) 2002 Caterpillar 246 Skid Steer Loaders

Grader2006 Caterpillar 140H GraderExcavators2010 Caterpillar 320DL Excavator2006 Caterpillar 320CL Excavator2002 Cat 320CL + Wacker G85 Aux Power2007 Caterpillar 324DL Excavator2007 Caterpillar 325CL Excavator2006 Caterpillar 315CL Excavator

Articulated Truck2002 Caterpillar 725 Articulated TruckForklift & Kershaw Cutter2008 Caterpillar TL642 ForkliftKershaw Klearway 800 Right of Way MowerAND over 200 More items - Dump Trucks,Haul Trucks, Lowboys, Goosenecks,Loader Tractors, Hammers, Gen Sets,Welders, Pipeline Equip, Pickups...

AR K L A H O M A PI P E L I N E - NO V E M B E R 11 - VA N BU R E N, AR K A N S A SDozers & Siidebooms2001 Cat D6R Dozer, Winch, S#5LN029952002 Cat D6M XL Dozer, Winch, S#3WN028272002 CatD5M XL Dozer, S#3CR019851994 Cat D6H XL Dozer, Winch, S#9LK00489(6) Caterpillar Sidebooms & Tack Tractors

Excavators2006 Cat 325DL Excavator, S#PAL00262 (3) 2007 & 2006 Cat 320CL Excavators2007 Komatsu PC200LC7 Excavator, S#C607672006 JohnDeere 200C LC Excavator, S# 5057801997 Samsung SE210LC Excavator, S#FCY0195

Mud Mixer2000 Tulsa Rig Iron Mud MixerForklift2003 Gehl DL10H-55 Telescopic ForkliftTrenchersTesmec TRS1000 Rock Saw/Trencher, S#220

Barber Green Bucket Ditcher, S#TA-30X176More…Water Trucks, Haul Trucks, Pickups, Lowboys,Athey Wagon, Rolligon Style Trailer, (5)Welders, (5) I-R Compressors, (6) Hy-draulic Hammers & More


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

ACT CONSTRUCTION ..............................................................................31ALEX LYON & SON INC

KISSIMMEE FL ................................................................................94ALLU GROUP ............................................................................................68ANACONDA USA ......................................................................................61ASC CONSTRUCTION EQUIPMENT USA ........................................2,3,10B3C FUEL SOLUTIONS ............................................................................31BANDIT INDUSTRIES INC ........................................................................62BARGAINS ................................................................................................88BLACKMON AUCTIONS INC

WILBURTON OK / VAN BUREN AR ................................................97BORDER EQUIPMENT..............................................................................23BRANDYWINE TRUCKS & EQUIPMENT..................................................20BROOKS SALES INC ................................................................................33CAROLINA CAT................................................................................15,16,17CASE CONSTRUCTION ......................................................................13,19CATERPILLAR ..........................................................................................63CCS EQUIPMENT......................................................................................21CEG SCALE MODELS ..............................................................................41CLASSIFIEDS ............................................................................................88CLEARSPAN FABRIC STRUCTURES ......................................................33COLDWELL BANKER ................................................................................72CON-EQUIPMENT OF THE CAROLINAS ................................................12CONSTRUCTION EQUIPMENT GUIDE

CRAWLER LOADER PROMO..........................................................52FLORIDA AUCTION PROMO 2015 ..................................................24WANTED ..........................................................................................89TARGETED EMAIL ..........................................................................30AUCTION RESULTS ........................................................................95

CRAIG MANUFACTURING........................................................................86CRANE SOLUTIONS ................................................................................29DOOSAN INFRACORE AMERICA........................................................78,79DOOSAN PORTABLE POWER..................................................................49DYNAPAC ..................................................................................................86EAGER BEAVER TRAILERS ................................................................44,45EQUIFY AUCTIONS LLC ..........................................................................94FELLING TRAILERS ..................................................................................43FLAGLER CONSTRUCTION EQUIP LLC ................................................6,7FLANGE LOCK ..........................................................................................27FLECO ATTACHMENTS ............................................................................74FLINT EQUIPMENT COMPANY USED ....................................................32FLORIDA UTILITY TRAILER......................................................................43G S EQUIPMENT ........................................................................................9GEHL ..........................................................................................................86GEITH INC..................................................................................................73GRINDERCRUSHERSCREEN.COM ........................................................60GROVE WORLDWIDE ..............................................................................99H & E EQUIPMENT SERVICES ................................................................20HELAC CORP ............................................................................................68HILLS MACHINERY COMPANY ..............................................................100

HYDRAULICIRCUIT TECHNOLOGY ........................................................74INTERSTATE EQUIPMENT CO ................................................................29IROCK CRUSHERS ..................................................................................60IRONPLANET ............................................................................................91JOHN DEERE ............................................................................................75KAWASAKI CONSTRUCTION MACHINERY........................................84,85KLEEMAN ..................................................................................................55KOBELCO CONST MACH AMERICA LLC ................................................39KOMATSU AMERICA CORP......................................................................47KPI-JCI ......................................................................................................59KUBOTA EXCAVATOR ..............................................................................87KUHN EQUIPMENT SALES INC ..............................................................57LABOUNTY MFG INC ................................................................................65LBX ....................................................................................................50,51LINDER INDUSTRIAL MACHINERY CO ....................................................5MACKINNON EQUIPMENT & SERVICE ..................................................18MAY HEAVY EQUIPMENT ........................................................................11MOBRO MARINE INC................................................................................71MONTABERT..............................................................................................69MOTLEY

CHESAPEAKE, VA ..........................................................................96NORAM ................................................................................................80,81NORTH AMERICAN ATTACHMENTS........................................................70NORTRAX EQUIPMENT CO FL ..........................................................25,27PEMBERTON INC......................................................................................72PETROWSKY AUCTIONEEERS INC

COLUMBUS OH................................................................................93POWER EQUIPMENT CO ........................................................................12POWERSCREEN MID-ATLANTIC ............................................................56PROXIBID

JENNINGS LOUISIANA....................................................................97RANSOME EQUIPMENT SALES LLC ......................................................89ROAD BUILDERS MACHINERY................................................................70ROLAND MACHINERY ..............................................................................35SANY AMERICA INC ............................................................................76,77SCHAEFER ENTERPRISES......................................................................72SENNEBOGEN ..........................................................................................54SOLESBEES EQUIP & ATTACHMENTS ..................................................72TEREX CRANES........................................................................................83TEREX FUCHS ..........................................................................................64THOMPSON MACHINERY USED PARTS ................................................68TOWMASTER INC ....................................................................................46TRENCH SHORING SERVICES................................................................37

ALABAMA SUPPLEMENTCOWIN EQUIPMENT CO INC ....................................................................3JCB OF ALABAMA ......................................................................................7THOMPSON TRACTOR CO ....................................................................4,5TRACTOR & EQUIPMENT CO INC ............................................................8

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com


Birmingham, AL205-841-6666Mobile, AL 36608251-633-4020Montgomery, AL334-262-6642Pensacola, FL

850-479-3004

Huntsville, AL256-536-9390Decatur, AL

256-350-0006Oxford, AL

256-832-5053

Springdale, AR479-927-1672Little Rock, AR

501-568-7867Shreveport, LA318-746-5272Alexandria, LA

318-443-7173Lafayette, LA

337-837-9600

Lake Charles, LA337-528-2661Baton Rouge, LA225-356-6113

Kenner, LA504-467-5906Memphis, TN

901-375-4902Nashville, TN

615-248-0266

Chattanooga, TN423-499-7700

Arden, NC828-684-1692Charlotte, NC

704-504-2870Raleigh, NC

919-781-9454Winston-Salem, NC

336-767-6900

Chesapeake, VA757-295-4944Ashland, VA

804-798-9740Roanoke, VA

540-362-3600Warrenton, VA

540-349-2878

www.cowin.com www.HE-equipment.com


Now Openin Charlotte!

1014 Atlas WayColumbia, SC 29209Toll Free: 888-830-5939Phone: 803-658-0200Fax: 803-233-4482

315 Cross County RoadNorth Charleston, SC 29418Toll Free: 866-830-7577Phone: 843-225-9377Fax: 843-225-9378

315 Easy StreetGreenville, NC 27834Toll Free: 877-549-3232Phone: 252-752-7145Fax: 252-758-4163

1501 Hedingham Blvd.Raleigh, NC 27604Toll Free: 888-986-8680Phone: 919-746-7938Fax: 919-746-7939

11717 Reames RoadCharlotte, NC 28269Toll Free: 888-986-8680Phone: 704-208-5564Fax: 704-208-5565

southeast 21 2014

Documents

twophase project

project involvestransforming

threeyear project

construction spending

construction newspaper

street n

andarchitectural design

federal data