southern machinery catalog 9-11

www.smthelp.comwww.smthelp.com

Shenzhen Southern Machinery Sales and Service Co., Ltd

---Machines' Catalogs---Machines' Catalogs

Add:Room 1806 Block 3 Jinyun COFCO, Qianjin 2nd Road， Xixiang, Baoan District, Shenzhen ,China

Update：2015-9-11

Shenzhen Southern Machinery Sales and Service Co., LtdShenzhen Southern Machinery Sales and Service Co., LtdAdd:Add:Room 1806 Block 3 Jinyun COFCO,Qianjin 2nd RoadRoom 1806 Block 3 Jinyun COFCO,Qianjin 2nd Road，， Xixiang, Baoan District, Shenzhen ,China Xixiang, Baoan District, Shenzhen ,China


Automatic Loader SLD-400B

Model SLD-400B SLD-400C SLD-400D

Dimension (L*W*H)1646*726*1250mm 2071*806*1250mm 2359*866*1250mm

PCB Size330*(60-250)mm400*(60-330)mm525*(60-400)mm

Conveyor Height 900±20mmPCB Direction L→R (Or R→L Option)Pitch Selective 10, 20, 30, 40, 50mm

Magazine Size (L*W*H)350*320*565mm460*400*565mm 535*460*570mm

Power Supply Single Phase 220V 50/60HzPower Consumption 180WAir Supply 5-7kg/cm2Communication Plug SMEMA SignalNet Weight 200KG 230KG 260KG



MODEL SULD-400B SULD-400C SULD-400D

Dimension (L*W*H)2440*726*1250mm3015*806*1250mm

3515*866*1250mm

PCB Size330*(60-250)mm400*(60-330)mm525*(60-400)mm

Conveyor Height 900±20mmPCB Direction L→R (Or R→L Option)Pitch Selective 10, 20, 30, 40, 50mm

Magazine Size (L*W*H)350*320*565mm460*400*565mm 535*460*570mm

Power Supply Single Phase 220V, 50/60HzPower Consumption 180WAir Supply 5-7kg/cm2Communication Plug SMEMA SignalNet Weight 220KG 250KG 280KG

Automatic Unloader SULD-400B



MODEL S-350CPCB Width 50-350mm (Option: Width Max.300; 400; 450mm)

Conveyor Height 900±20mm (Option: 950 ±20mm)PCB Direction L→R (Or R→L)

Conveyor Speed 0-10000mm/minPower Supply Single Phase 220V, 50/60Hz 80W

Rail Length 0.5m, 0.8m, 1m, 1.2m, 1.5m, 2.0m (or special size)Control System Relay Board (2 Sensor without Stopper) Option: PLC

Foot Switch StandardLighting Option

SOP Rack OptionCommunication Plug SMEMA Signal

Dimension Rail Length*794*910mm (L*W*H)Net Weight 75KG

Buffer Conveyor S-350C



MODEL SP-1200PCB Size 350 X 1200mm

Printing Area 320 X 1270mmPCB Fixed System PCB Outer Or Pin Positioning

Frame Size 370X470mm，550X650mmAdjusting for table Front

Printing Accuracy ±0.05mmRepeating Accuracy ±0.02mm

PCB Thickness 0.2-2.0mmAir Source 4-6kg

Power Supply Single Phase 220V, 50/60Hz 100W

Dimension 900*900*1650mm (L*W*H)Net Weight 250KG

Semi-Auto Screen Printer SP-1200



SYSTEMSYSTEM○ Automatic stencil positioning system○ Hommization operation interface (teached by the software notes).

Stencil Frames 470 X 380-737*737mm

Stencil Clamping Air ValveStencil Positioning Automatic

PCB Size 50*50-400 X 340mm

PCB Thickness 0.4-5.0mmTransport Direction Left – Right, Right -Left

Transport Speed Stepper Motor, 100-1500mm/s Program Control

PCB weight 0-3KGTransport Height 900+-40mmPrinting Accuracy ±0.025mm

Repeating Accuracy ±0.01mm

Air Source 4.5-6kgPower Supply Single Phase 220V, 50/60Hz 100W

Control Method PC Control

Operating System Windows XP

Dimension L 1140 X W 1360 X H l500mm

Machine Weight Approx: 1000kg

SPECIFICATION:SPECIFICATION:

Automatic Screen Printer SP-1008



Model S-1200-LVApplicable PCB 50mm*50mm~1200*325mm

Placement Head Quantity 6Max Mounting Capability 28000 CPH

Placement Accuracy 0.05mmApplicable Components 0603-7474, SOP, SOT,QFP, QFN, IC

Component Supply Configuration

Tape Feeder

Optional 8mm, 12mm, 16mm, 24mm Feeder Port 30

External Dimension L 2000mm×W 1150mm×H 1500mmPower Supply Single phase, AC 220V(±10%), 50Hz

Max Working Power 2.0KWWeight Approx 1200KG

Pick & Place S-1200-LV



GENERALMachine Dimension L3000 *W612 *H1220mmWeight Approx.280KgHEATING ZONE

Number of Heating Zones Top 6/Bottom 6Length of Heating Zones 1800mmHeating Mode Circulation hot air

Number of Cooling Zone 1 cooling FanCONVEYOR SYSTEMMax. Width of PCB 300mmConveyor Direction L→RConveyor Height 880±20mmPCB Transmission Mode MeshConveyor Speed 0-1500mm/min

CONTROL SYSTEMPower Supply 5 Wire 3 phase, 380V 50/60HZ

Power for Warm Up 10KW

Power Consumption 4.5KW

Warming Time 15 Min

Temperature Control Method

PID Close Loop Control + SSR Driving

Abnormal Alarm Abnormal Temperature (Extra-high temp)

Lead Free Reflow Oven S-6600



Model S-1688Stencil size 750(L) × 736(W) × 40mm(H) Liquid capacity 50 L maximumBest liquid usage 30～40 LCleaning method 360 ° rotating liquid spray

cleaning and dry compressed airCleaning time 3～5 minutesDry time 3～5 minutesExternal air 0.45 ～ 0.7 (Mpa)Gas consumption （400 ～ 600） L/MinutesThree levels filtering system 10µm,5µm,1µmWeight 320KgSize 900(L) × 700(W) × 17300mm(H)

S1688 Pneumatic Stencil Cleaner Machine



0.5mm-5.0mmPCB Thickness

12000MM(L)-300mm（W)PCB Size

FEEDER Qty

13000MM(L)-300mm（W)Rail Size

120K CPHWorking Mounting Speed

36 pcs

140K CPHTheory Mounting Speed

Power Supply

+-0.02MMMounting Accuracy

220AC

Front→→Rear, Rear→→FrontDirection

Max. Power

320MM/SPCB Conveyor Speed

3.0KVA

CCD Vision, Mark CorrectionPCB Position

Air Pressure

13.5mmMin Mounting Distance

5kg

0603,0805,1206,2835,3014,3528,5050,5630,5730,RGB and other LED belt lightMounting Range

Machine Dimension

Double Arm, 36 pcs nozzle (18 pcs nozzle per arm)Mounting Head Principle motor (Magnetic)

L：2650mm W：1850mm H：1350mm

ParameterParts

Weight 2000kg

Operator 1 person

LED High Speed Pick And Place SF-100

T8 LED Light



Model S-DS300

PCB width Max.50～300mm(The longest support 350MM)

Transportation height 750±20mm

Transportation speed 0～1.8M／Min

Transportation Angle （Welding Angle） 0～7 degree

Transportation direction From L to R

Component height limit Max.80mm

Maximum capacity 250Pcs/hour

Dip soldering area 350X300MM

Preheating zone length 350mm(Stay - can set the preheating time)

Preheating zone number 1

Preheating zone power 2.1kw

Preheating zone temperature Room temperature～250℃(Can be set up）

Heating mode Far infrared

The power of the stove 7.2kw

"Tin stove dissolve tin amount 85KG

"Tin stove temperature Room temperature～350℃、Control precision ±1℃

Temperature control mode P.I.D+SSR

Machine control mode Touch screen +PLC

Flux capacity 3L

Spray way Import shower

power supply 3 phase 5 wire 380V

Starting power 10kw

S-DS300 Automatic dip soldering machine

**Can be used to lCan be used to long leadong lead components components welding welding **



Insertion Rate 18,000 pcs/hr (can enhance the speed by upgrading the software)

Non Performing Rate Less than 1000PPMInsert Theta 0° to 360°，increment of 1°.Component Span Dual span 2.5mm/5.0mmPCB size Min-50mm*50mm,Max-450mm*450mmPCB thickness 0.79-2.36mmComponent Specs Max Body height 20mm &max body diameter

10mm,max lead diameter 0.8mmComponent types Radial tape packed material such as capacitor,

transistor, triode, LED light, key switch, resistor,connector, coil, potentiometer, fuse socket, blown fuse, etc.

Clinch length 1.5±0.3mm(short blade),2.0±0.3mm(long blade)Clinch degree 10°-35°(adjustable)Station quantity 60 stations(recommended),optional (10-100 stations)Machine size (length×width×height)

Main unit 1800mm×1600mm×2000mm

Station size 500mm×600mm×760mmMachine weight 2000KG with 40 stationsPower supply 220V,AC (single phase), 50/60HZ,2.0KVASystem protection Uninterruptible power supply (UPS) configuration, run 15 minutes

after power outageWorking power 1.6KW (Energy Saving)Air pressure 0.6–0.8MPAAir consumption 0.3m³/minuteAmbient temperature 5°C-25°CMachine noise 80 dBCoordinate calibration Machine visual system,MARK vision correction with multi-pointsDrivingsystem AC servo, AC motorData input USB interface input(EXCEL format)

S3000 Series- Radial Insertion Machine



Insertion Rate 24000 pcs/hrNon Performing Rate Less than 300PPMInsert Theta Parallel 0°,90°,180°, 270°Component Span Dual span 5.0mm-20mmPCB size Max: 450mm*450mm;

Min:50mm*50mm PCB thickness 0.79-2.36mmComponent types Axial tape packed material, such as

capacitor, transistor, diode, resistor, blown fuse.

Clinch length 1.2-2.2mm(adjustable)Clinch degree 0-35°(adjustable)Station quantity 60 stations(recommended),optional（10-

100 stations）Machine size (length×width×height)

Main unit 1700mm×1300mm×1600mm

Station size(length×width×height)

510mm×1000mm×1410mm(10 stations)

Main unit weight 1500KGAuxiliary unit weight 750KG（40 stations）Power supply 220V,AC(single phase), 50/60HZ, 2.0KVA;System protection Uninterruptible power supply (UPS)

configuration, run 15 minutes after power outage

Working power 1.6KW (Energy Saving)Air pressure 0.6–0.8MPAAir consumption 0.3m³/minute

S4000 Axial Auto Insertion Machine



Speed 12,000 CPH SpecPCB Size Max. 480mm * 480mmPCB Thickness 0.76-2.36mmInsert Head 1-4 (Optional)Machine dimension 2300mm*1340mm*1860mm (L*W*H)Machine weight 1500KG (4 heads)Power supply Single Phase 220VAC, 50/60HZ, 1.0KVASystem Protection UPSAir pressure 0.4-0.6Mpa (Round pin 0.55-0.6Mpa)/0.3M3/MinData input USB interface input (EXCEL format)Control System English version interface (WINDOWS system control

platform) LCD monitorPCB transfer mode automatic load / unload

S-7000I Odd Form Inserter



S-WS250 Wave Solder Machine

PCB Size Max.50~250mm Conveyor height 750±50mmConveyor speed 0~1.8M／MinConveyor Angle 3~7º (adjustable)

Conveyor direction L->RComponent heigh Max.100mmPre-heating zone 600mmSolder pot wave 2

Pre-heating power 3kwPre-heating zone temp room temperature--250°C

Cooling zone 1 Fan coolingSolder pot power 6kw

Solder pot capacity Approx.200KGSolder pot temperature room temperature--300°C±1-2℃

Control method P.I.D+SSRSystem Control PLC + Touch Screen Control

Flux capacity Max5﹒2LSpray Fluxer ST-6 Spray

Power Supply 3P 380V ACTotal Power max.9kw

Normal working power Approx.1.5kwAir Pressure 4~7KG/CM2

Overall Dimensions L2100×W1200×H1400MMMachine Weight Approx.400kg



S-500S Auto-Dip Soldering machine

Solder heigh 50-60mm

PCB Size 350X300MMSpeed AdjustableSolder Dwell heigh 0-70mmSolder Dwell Time 1-10 secTemperature control PID controlTemperature range 0-450 ℃Preheat time 0-120 sAutomatic removal cycle 11 sDip soldering cycle 16 s

Solder Pot Size 400 * 340 * 80 mmOverall Dimensions 700 * 750 * 620 mmWeight 75 kgPower Requirements 220V, 50/60 Hz,3.6KW



Automatic Spray Fluxing System Model S-P500/S-P500A

Dimensions L1200mm*W700mm*H1100mm（Contains no fan height 250-350MM ）

weight Approx.100kgControl PLC + button/relay controlPCB transmission height 750±50mmTransportation speed 0-2000mm/minTransfer direction left to right (right to left) can be customizedPCB edge space ≥3mmTrack width modulation MAX50～320mm

Air pressure 0.4－0.6Mpa

Amplitude modulation mode manual

Exhaust air requirements more than 15 m3 / minExhaust fan matchingPower supply AC380V /220V 50～60HZThe total power 0.05KW

Nozzle number 2/2Nozzle type high atomizing import nozzleDriving mode stationaryComponents height up:80 mm , down :50 mm (customizable)Capacity No limitPump standard



S8300 Shuttle conveyor -to merger production line 2 in 1

Enclosed design ensures highest level of safety Top Safety cover can be open for easy access to maintenance PLC programming control User friendly ‘soft touch’ LED membrane control panel Fast, parallel and precise sliding motion. (Servo Control） Smooth and parallel width adjustment.( Lead screw driven) PCB direction flows can be customized. SMEMA compatible I/O



Solder Chip FEEDER

Cutting speed（pcs/min） 100Repeat Accuracy（mm） 0.05

Cutting Length（mm） 1~2mm(Adjustable)Tin Diameter（mm） 0.6 0.8 2.0 (Optional)

Control Way Touch-tonePower Supply（V/Hz） AC 220V,50/60Hz

Weight（kg） 3.5kgDimensions（mm） L:680MM W:38.5MM H:125.1MM



SMT Feeder Calibration jig

Weight 45Kg

Working Voltage 220V/AC(50Hz) 60W

Material aluminum and iron

Air Pressure 5KG/c㎡

Visual System 50 times magnification CCD camera

Lighting system Ring the LED lighting

Display system Ultra bright LED color display

Feeding control Precise 8 *2mm /12 *4 mm / 16 * 8mm and 24*8mm feeder control zone

Power supply 220V, 50HzMachine Size 350*500*550 mm



Desktop Pick & Place S-48VModel S-48VIncrease the powerful visual function, on their own view and the view cameraPCB Size 10mm*10mm～380mm*415mmX, y axis movement range 420×460mm Z axis movement range 15mmNumber of mount head 2

station number

Ribbon material station（8mm=22，12mm=4，16mm=2，24mm=1，Lead IC material 12 station、The other 18 station can be customized, 20 IC tray, for custom material station)

Speed 6000cph（When the vision correction ：4000cph）Accuracy ±0.025mm

Original size 0402-5050，SOP,QFN(Strip width：8MM，12MM,16MM,24MM)

Equipment size L 960mm×W 655mm×H 285mmVacuum pump -92KPA (mute type pump)Number of pump 2 (mute type pump)Power supply 220V（110V）, 50HzPower 200WWeight 65kgVolum 0.51 cubic meters



Vibrating Feeder for LED lens

MODEL S-720MODEL S-720

Dimension (L*W*H) 600*900*920mm

speed >100pcs/min

Conveyor Height 900±20mm

Power Supply Single Phase 220V, 50/60Hz

Power

Consumption

120W

Air Supply no need

Net Weight 120KG

single/double/treble-feeding track

Suitable for most models of mounter



Solder Paste Mixer

Voltage AC 220 v Revolution 1000/minute Rotation 900/minute Installation dimensions 440 * 440 * 550 mm

Time delay precision

set data delay error < 0.1%

repeat delay error < 0.1%,

no effect change between AC85-264 v voltage

Reset method power reset Control methods electricity latencyRepeat The time interval is not less than 0.5 sOutput capacity AC250V 3 A; DC24V 3A (resistance)Insulation strength 100 M Ω/ 500 DCDielectric strength 2.5 KV/min

Power supply voltageDC12V DC24V, -5 ~ + 10%

AC85-264V AC24V AC12V

Mechanical life 1﹡ 1000000

Electrical life 5 ﹡100000

Power consumption MAX300WUsing the environment temperature - 23 ℃ to 60 ℃

Using the environment humidity 35-80% RH

Describtion:Describtion:* Principle is based on motor revolution and rotation of the mixing

way.

* Don't need to remove cold storage of solder paste out of ice.

* The solder paste back to temperature in a short time, stir well

can be used at the same time

* 500 g solder paste,mixing two cans

at the same time.Save time.

* Mixing process, no need to open

the solder paste box.



Southern Machinery

Contact:Contact:

ChanChan：：Skype :chan12477357Emal :[email protected] Q :2355736092Phone :+86 15012477357Website:www.smthelp.com

**FacebookFacebook：：Search Search ““Auto InsertionAuto Insertion””

southern machinery catalog 9-11

Automotive