spark pocket 2 user guide - spark new zealand
TRANSCRIPT
1
Spark Pocket 2User Guide
2
Table of ContentsDescription 4Firsttimesetup 6HowtoinsertaSIMcard 6Howtochargeyourphone 6Switchon/offyourphone 7ActivateMeetingmode 8Customizetheringtone 9Setthedateandtime 11Createacontact 13Managingyourcontacts 14ImportingcontactsfromanSDmemorycard 14ImportingcontactsfromaSIMcard 15SendingabusinesscardinvCardformat 15Makeacall 16Viewingthecalllog 17Answer/Hangupacall 19Voicemail 20Writeandsendatextmessage(SMS) 21UsingtheInternetbrowser 23Takingapicture 24Viewingapicture 24Settinganalarm 25Settingupshortcuts 26Addingane-mailaccount 27
3
Refreshingtheinbox 28Downloadingattachments 29Viewingattachments 29Writingandsendinganemail 30SettingupBluetooth 31Makingyourdevicevisible 32Pairingyourdevicewithanotherdevice 33Makingyourphonesecure 34ChangingthePINcodeoftheSIMcard 34Changingthelockcode 35Deletingallphonedata 36Restoringfactorysettings 36Doingamasterreset 36Usingmobileapps 37
4
Description
1. Flash2. Camera3. MessagesandmissedcallnotificationLED4. Batterychargelevel
5.Backcoveropening6. Audio Jack 7.USBconnector
2
5
13 7
6
4
5
1. Menu and OK key2.Navigationkey3.Upperleftkey4. Make a call5. Hold for torch
6. Upper right key7. Switchon/offkeyandhangupa call8. Pressandholdforsilentmode
4
5
6
7
8
2
3
1
6
1Ifthedeviceisswitchedon,presstheredkey toswitchthedeviceoff.2Removethebackcover.3RemovethebatteryandinserttheSIMcard.
Connect the device to the micro-USB charger and plug it into a socket.
Firsttimesetup
How to insert a SIM card
How to charge your phone
7
Press the red key for3secondstoswitchoffthephone.
1 Press the red key for3seconds.2 Followtheinstructionsthatappearonthescreentoconfigureyourdevice.
Switch on/off your phone
8
SelectMeeting. AmessageindicatesthattheMeetingmodeisactivated.
ActivateMeetingmode
9
Select the profile General and press the lef t key to accesstheOptionsMenu.
SelectCustomize.
Customizetheringtone
10
Select Ringtone and press the OK button.
Select a ringtone and press OK to confirm.Afterthat,selectOptionsthenSave
11
Setthedateandtime
SelectPhonesettings. SelectTimeandDate.
12
SelectSettime/date. Editthetimeanddatethenpresstheupperleftkeytovalidate.
13
Create a contact
SelectToPhoneorToSIM. FillinthefieldsandselectOptions.ThenselectSave.
14
Managing your contactsImporting contacts from an SD memory card
Note: To perform the following procedure, you must have an SD card that contains contact information that is not already stored on your phone.
1.SelectOptions.2.ThenselectContactSettings.3.ThenselectImportContacts.4.ConfirmtoImportcontacts.
15
Importing contacts from a SIM card
1.SelectContactSettings.2.SelectCopycontacts.3.ThenselectToPhone.
Sending a business card in vCard format
1.PressOptions.2.SelectSendvCard.3.Selectfromthefollowingoptions: a.Asamultimediamessage. b.Asane-mail. c.ViaBluetooth.
16
Make a call
Fromidlescreen,dialanumberandpress .
17
Viewing the call log
Note:Youcanaccessthismenubypressingandholdingthiskey .Browsethroughthemenususingtheleftandrightnavigationkeys.
All calls Outgoing calls
18
Missed calls Incomingcalls
19
Answer/Hang up a call
Toansweracall,openthephoneandpress .Tohangup,press .
20
Voicemail
Fromthehomescreen,pressthe1keyfortwosecondstocallyourvoicemail.
21
Writeandsendatextmessage(SMS)
SelectWriteMessageandpressOK. Typethetextofthemessage.
22
Presstheupperleftkey.
SelectSendandpressOK.
23
Using the Internet browser
Note: When you open the browser for the first time, a message will prompt you to accept the terms of use. Use the upper left key to confirm.Note: Usage charges may apply when accessing the internet. Check that your plan includes mobile data before accessing the internet.
1.FromtheHomescreen,presstheOKkeyandselectBrowserinthemainmenu.2.UsethenavigationkeystoselecttheGoogleicon.3.UsethenavigationkeystomovearoundthescreenandplacethecursorontheGooglesearchbar.4.Oncethesearchbarappearsblue,presstheOKkeytoactivatetheinputarea.5.Useyourphone’skeypadtoenterthekeywordsofyoursearch,andthenpresstheOKkeytoconfirm.6.UsethenavigationkeystomovethecursorontotheFindbutton.7.PresstheOKkeytoconfirm.8.Usethenavigationarrowstomovethecursoraroundthescreenandselectthedesiredsite.9.PresstheOKkeytostartloadingthesite.
24
Taking a picture
OnceyouareintheCameramenu,presstheOKkeytotakeapicture.
Viewing a picture
1.OnceyouareintheGallerymenu,selectthepictureyouwishtoview.2.PresstheOKkeytodisplayit.
25
Settinganalarm
Chooseanitemfromthelistandeditthesettingstosetyouralarm.
SetyouralarmsettingsandsavebyselectingYes.
26
Setting up shortcuts
1.FromtheHomescreen,presstheOKkey.2.Inthemenu,selectSettings,thenpresstheOKkey.3.SelectPhoneSettings,thenShortcutManager.4.Selectoneofthefollowingkeys: a.Leftshortcut b.Rightshortcut c.Upnavigationkey d.Downnavigationkey e.Leftnavigationkey f.Rightnavigationkey
Note: The "navigation" keys may have several shortcuts: one with a short press, and another with a long press.
a.Toaccesstheshort-pressshortcut,pressthekeyforonesecondwhenyouareintheHomescreen.b.Toaccessthelong-pressshortcut,pressthekeyfor3secondswhenyouareintheHomescreen.
27
5.Onceyouhaveselectedthedesiredkey,presstheOKkeytoaccessthelistofphonefeatures.6.ChooseafeatureandthenpresstheOKkeytoconfirm.
Note: If you have selected a navigation key, you must specify whether the shortcut should appear after a short press or long press of the button.
7.PresstheOKkeytoconfirm.8.Repeatthesequencefortheothershortcuts.
Addingane-mailaccount
Note: Usage charges may apply when using email. Check that your plan includes mobile data before accessing the internet.
Amessagewillinformyouthatusingthisfeaturewillconsumemobiledata.Ifyouhaveaplan/packageintendedformobiledataconsumption,usetheupperleftbuttontocontinue,otherwise,presstheupperrightbuttontogobacktothehomescreen.
Note: To use this feature, you must have an email address. Xtra email is not supported on this device.
28
1.Amessagewillappearandwillpromptyoutocreateanaccount.Pressthebuttononthetoplefthandsidetoconfirm.2.Choosetheserverwhereyoure-mailaddressislocated.3.EnteryouremailaddressintheAddressfield,andyourpasswordinthePasswordfield.4.PresstheOKkeytoconfirm.
Youwillthenaccessthefollowingmenu: • Inbox • Outbox •Sentmessages •Drafts
Note: To send and receive e-mails, you must allow access to the POP and IMAP protocols. To do this, go to the settings of your account using your computer.
Refreshing the inbox
1.Onceyouareinthemainmenuofyoure-mailaccount,pressthebuttononthetoplefthandsidetodisplaytheOptions.2.SelectRefresh.
Allnewmessageswillthenbelistedintheinbox.
Note: Make sure you refresh regularly to receive the latest e-mails on your phone.
29
Downloading attachments
1.Openanemailthathasanattachment.2.PressthekeyonthetoplefthandsidetodisplaytheOptions.3.SelecttheGetContentoption.4.Selectoneofthefollowingoptions: •Downloadalltodownloadthetextcontentoftheemailand attachments. •Contenttodownloadonlythetextcontentoftheemail. •Selecttheattachmentbyselectingthename.3.PresstheOKkeytostartthedownload.Amessagewillappear,indicatingthestatusofthedownload.
Note: The download may not be possible because your phone may be unable to access the network. If the download fails, try again later.
Viewing attachments1.Oncethedownloadiscomplete,presstherightnavigationkey.2.Pressthebuttononthetoplefthandsideandselectfromthefollowingoptions: •Read/view •Save3.WhenselectingSave,youwillentertheFileManagerapplication.4.Selectoneofthefollowingoptions: • Phone • SD card
30
5.SelectafolderandpressthebuttononthetoplefthandsidetodisplaytheOptionsmenu.6.SelecttheSelectmenu.7.Enterthenameofthecontenttobesavedandpressthebuttononthetoplefthandside.8.SelectSaveinthemenu.
Note: To view previously saved content, go to the Gallery menu in the main menu.
Writing and sending an email
1.PressthebuttononthetoplefthandsidetoaccessOptions.2.SelectWriteemail.3.AddarecipientintheTofieldusingtheOKkeyandkeypad.4.Enteryourmessageusingthekeypad.
Note: When entering a message, use the * key to access the list of symbols, and the # key to change the type of input (lowercase, uppercase, numbers)
5.PressthekeyonthetoplefthandsidetoaccesstheOptions.6.SelectSendandpresstheOKkey.
31
SettingupBluetooth
Note: When using Bluetooth, avoid trying to connect to devices belonging to people you do not know.
1.FromtheHomescreen,presstheOKkey.2.SelectSettingsinthemenuandpresstheOKkey.3.SelectWirelessandNetworksintheSettingsmenu.4.SelectBluetoothandclickOKusingthe buttononthetoplefthandside.5.SelectEnable.
Note: If Disabled appears in the green box, this indicates that the Bluetooth option is disabled. Press the OK key again to enable it.
Note: If Enabled appears in the green box, press the button to go back to the home screen.
32
Making your device visible
InordertoexchangeinformationviaBluetoothwithanotherdevice,youmustmakeyourdevicevisible.
1.FromtheHomescreen,presstheOKkey.2.SelectSettingsinthemenuandpresstheOKkey.3.SelectWirelessandNetworksintheSettingsmenu.4.SelectBluetoothandclickOKusingthekeyonthetoplefthandside.5.SelectVisibility.
Note: If the word "Disabled" appears in the green box, this means that the device is not visible. Press the OK key again to enable it.
Note: If Enabled appears in the green box, press the button to go back to the home screen.
33
Pairing your device with another device
Note: To exchange data using Bluetooth, you must pair the devices concerned.
1.FromtheHomescreen,presstheOKkey.2.SelectSettingsinthemenuandpresstheOKkey.3.SelectWirelessandNetworksintheSettingsmenu.4.SelectBluetoothandclickOKusingthe buttononthetoplefthandside.5.SelectMydevice.6.PresstheOKkeytostartthesearch.
Note: The search will then start. Nearby devices that are also using Bluetooth will appear on the list.
34
Making your phone secureChanging the PIN code of the SIM card
Note: Your SIM card is protected by the PIN code. You will be prompted when you switch on your mobile. The default PIN code will be 1234 or 0000, if you have never changed it before. To keep your data safe and secure, enabling and/or changing your PIN is strongly recommended.
1.SelectSecuritySettings.2.ThenselectSIMSecurity.3.ThenselectChangePIN.4.EnterthecurrentPINcodeoftheSIMcard.5.EnteranewPIN.6.PresstheOKkeytoconfirm.7.EnterthenewPINagaintoconfirmthechange.
Yourphonerebootsonceconfirmed.
35
Changing the lock code
Note: The lock code is a personal code that prevents anyone from using your phone.
Note: The default lock code is 0000.
1.SelectSecuritySettings.2.ThenselectPhoneSecurity.3.ActivatethephonelockbyselectingPhoneLock.4.YoucanchangethepasswordbyselectingChangePassword.
36
Deleting all phone dataRestoring factory settings
Whenrestoringdata,thefactorysettingswillbeapplied.Thismeansthatallphonesettingswillbechangedbacktothephone'soriginalsettings.However,allpersonaldata(suchasSMS,MMSandcontactssavedonthephone)willbesaved.
1.SelectRestorefactorysettingsandpresstheOKkey.2.Pressthe buttononthetoplefthandsidetovalidate.
Doing a master resetWhenyouresetthephone,allpersonaldata(suchastextmessages,multimediamessages,andcontactssavedonthephone)inthephonewillbedeleted.Theoriginalsettingswillberestored.TheresetwillnotaffectthedatastoredontheSIMcard.
Note: Perform this operation when you wish to give the phone to a new owner on a permanent basis.
37
1.SelectMasterreset.2.Enterthepassword0000.
Usingmobileapps
Fromthismenu,youwillbeabletoaccessthefollowingapplications:
Note: This menu has 2 screens. Once you are in the Applications menu, use the arrows on the browser to move from one screen to another.
38
Calendar Displaysthecalendar.YoucanaddaneventtoadatebyselectingtheOptionsmenu,andthenselectingAddEvent.
Calculator Makescalculations.Tousethecalculator,typethenumbersusingthekeypadandselecttheoperationtousewiththearrowsonthebrowserasshowninthediagram.PresstheOKkeytodisplaytheresult.
Conversion Convertsweightorlengthvalues
Light Activatesthelight.
Note: Press and hold 0 on the phone for 3 seconds to turn the light on and off directly.
Notes Forwritingremindernotes.
Save Forrecordingaudiomessages.
Stopwatch Formeasuringtime.
World clock Tofindoutthecorrecttimedifferenceusingtheworldmap.
Task Addataskheretoremembertodosomething.
Media FindyouraudioorvideofilessavedinthephoneorintheSDcard.
Note: You can only play files compatible with your phone.
File Manager ForaccesstopicturesorvideossavedfromanMMS.
SIM Foraccesstotheapplicationsmadeavailablebyyouroperator.