NATIONAL INSTITUTE OF FASHION TECHNOLOGY Hyderabad

DEPARTMENT OF FASHION TECHNOLOGY

GARMENT CONSTRUCTION AND PATTERN MAKING-II

SPECIFICATION SHEET ON

KNIFE PLEAT SKIRT

SUBMITTED BY:- VIVIDHA YADAV ROLL NO. 28 DFT-3

GARMENT SPECIFICATION

MEASUREMENT SPECIFICATION (SIZE 8)

Bust Circumference 34”Waist Circumference 25”Princess Line HalterLength()

Front Back

8 ¾”6”

Full Length Front Back

33 1/2”30”

Halter Band Length 20”Bust Radius 2 7/8”Bust Span 3 5/8”Side Seam Length 29”Waist Arc

Front Back

6 ½”6”

Lower SkirtSkirt Length

Front Back

24 ½”24 ½”

STITCH/SEAM SPECIFICATION

S. No. Seam Place Seam/ Stitch Type

1. Side Seam Plain Seam

2. Waist Plain Seam

3. Bottom Hem Plain Seam

4. Dart Closing Plain Seam

5. Belt Plain Seam

BELT SPECIFICATION

Thread:- 3 ply Polyester threadFabric :- SatinFabric FusingStrap Length:- 64’’Strap Width:- 2 ½’’

FRONT VIEW (Garment)

BACK VIEW (Garment)

PRINCESS LINE HALTER DRESS(Fabric Detail)

SIZE: - 8

FABRIC USED : COTTON POPLIN(INTERLINING)

Satin(Black)

WIDTH OF FABRIC 44 inches 36 inches 44 inchesFABRIC CONSUMPTION

3 mtr 3 ½’’ mtr 1 ½’’ mtr

COST OF FABRIC Rs. 90/mtr Rs. 50/mtr Rs. 60/mtr

FABRIC SWATCH

MACHINES USED: Single needle lock stitch machine. Overlock machine(three thread overlock)

THREAD DETAILS: Ply:- 3 ply polyester thread

NEEDLE USED FOR SNLS : DB×14

TRIMS AND ACCESSORIES: Concealed Zipper --10 inches.

MANUFACTURING INSTRUCTIONS

1. Close the darts of Princess Line halter.2. Attach Remaining two Part of front with CF part.3. Similarly do in back part (Attach all Princess Line Halter Together).4. Now, similarly do same thing in lining part.5. Attach the Princess Line Halter with Circular Skirt Part.6. Similarly Do In Back Part and Lining Part.7. Keep it all Separate.8. Now Attach the main garment (front) with lining (front). During This process

sandwich the halter band between main fabric and lining fabric. So That it can fix.9. Same In Back Part.(Just Main Fabric and Lining Fabric)10. Stitch the 4 plies together as side seam on the wearer’s right.11. Over lock Main Garment and Lining Garment at Side Seam.12. Now, Attach the Zipper 10’’ down CB Length.(3 ½’’ down from waist line).13. Now Over lock the CB (From Zipper till Bottom).14. Bottom hemming (fold ¼’’ and ¼’’).15. Attach Belt loop with main fabric.16. Stich Belt For Waist on Satin Fabric.

TOTAL COST OF THE GARMENT

MATERIAL USED

CONSUMPTION COST TOTAL COST

Suiting 3 metres 270/m 810Buckle 1 50 50Concealed Zipper

1 pc( full length) 15 15

TOTAL 875

INSPIRATION DERIVED