pumps - specification sheet

2
© SFA Saniflo Inc. TECHNICAL SPECIFICATIONS The Sanivite drain pump is used to pump gray water away from a variety of fixtures in commercial and residential applications. The system is able to discharge the waste up to 16 feet vertical and/or 150 feet horizontal. This model was designed to sustain the toughest applications as it is capable of handling hot water and grease. Discharges the waste through a 1" or 1 1 2" rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system. This elbow can be rotated 360 degrees depending on the discharge installation. Has been designed with a 1 1 2" vent connection on top of the lid. All plumbing codes require connection to a vent system. Either inlet located on top of the housing can be used for the vent or as an inlet. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is not permitted. Discharges gray water from a kitchen sink, bath/shower, dishwasher, washing machine (indirect connection via laundry sink). The gray water will drain into the system via three inlets, two 2" inlets (with built-in check valves) on either side of the housing and one 1 1 2" inlet on top of the enclosure. Pump type: Drain pump Electrical: 120 V – 60 Hz / 4.5 Amps* (Max) Motor: 0.4 HP oil-filled thermally protected motor Capacitor rating: 18 microfarad Operating Temperature: 140°F Max. Power cord length: 42 1/2 inches Noise level: 44 dBA (Lp) (measured at 3 ft.) DRAIN PUMPS - SPECIFICATION SHEET SANIVITE PART NO. 008 Example of installation. Follow local plumbing codes for actual install. * Either inlet can be used as a vent or as a drain inlet. * *

Upload: others

Post on 09-Jan-2022

7 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PUMPS - SPECIFICATION SHEET

© SFA Saniflo Inc.

TECHNICAL SPECIFICATIONS

The Sanivite drain pump is used to pump gray water away from a variety of fixtures in commercial and residential applications. The system is able to discharge the waste up to 16 feet vertical and/or 150 feet horizontal. This model was designed to sustain the toughest

applications as it is capable of handling hot water and grease.

Discharges the waste through a 1" or 11⁄2" rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system. This elbow can be rotated 360 degrees depending on the discharge installation.

Has been designed with a 11⁄2" vent connection on top of the lid. All plumbing codes require connection to a vent system. Either inlet located on top of the housing can be used for the vent or as an inlet. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is not permitted.

Discharges gray water from a kitchen sink, bath/shower, dishwasher, washing machine (indirect connection via laundry sink). The gray water will drain into the system via three inlets, two 2" inlets (with built-in check valves) on either side of the housing and one 11⁄2" inlet on top of the enclosure.

Pump type: Drain pumpElectrical: 120 V – 60 Hz / 4.5 Amps* (Max)

Motor: 0.4 HP oil-filled thermally protected motorCapacitor rating: 18 microfarad

Operating Temperature: 140°F Max.Power cord length: 42 1/2 inches

Noise level: ≤ 44 dBA (Lp) (measured at 3 ft.)

DRAIN PUM

PS - SPECIFICATION

SHEET

SANIVITE • PART NO. 008

Example of installation. Follow local plumbing codes for actual install.

* Either inlet can be used as a vent or as a drain inlet.

**

Page 2: PUMPS - SPECIFICATION SHEET

28b/28c 21e 28b 21d

28b

31

28b

28b

31

28b

2a 58

21c 21a

28b

37

2b

7

184

63

3

20

10

9

11

12

48

14

38

50

28a

28b

31a

31b

28a

64

56

42

1

15

39

8

17

40

41

24

20b

13

PLEASE CALL US TOLL-FREE AT 800-571-8191 (US) / 800-363-5874 (CDN)TO PURCHASE PARTS REFERENCED ABOVE

FOR ADDITIONAL TECHNICAL QUESTIONS, PLEASE CALL 800-571-8191

37.9 47.9 57.9 67.9 77.9 87.9 97.9 107.9

0

1

2

3

4

0

2

4

6

8

10

12

14

16

10 15 20 25 30

Flow Rate (liters/min)

Vert

ical

Dis

tanc

e (m

)

Vert

ical

Dis

tanc

e (F

eet)

Flow Rate (gallons/min)

Discharge pipe diameter: 1" - 1½"Discharge rate at 16 ft: 18 GPM*Discharge rate at 3 ft: 29 GPM*

Shut-off head: 30 ft.Normal running time: 3-5 seconds (short bursts)

Capacity: 3.7 gallonsInlets: 2" (sides), 11⁄2" vent (top)

Method of activation: Membrane/microswitchShower/bathtub base height: 6" min.

Weight: 16 lbs.Certifying agencies: CSA (IPC, NSPC)

Recommended accessories: Descaler, SanialarmConnections: Sink, shower/bathtub, washing machine

(indirect), dishwasher, laundry sink, etc.* Measured using 1” discharge. Information will vary once the discharge size is increased. Consult with factory.

AN EASY SOLUTION FOR A KITCHEN INSTALLATION OR FOR ANY

GRAY WATER APPLICATION

Drain pump small enough to fit inside a kitchen cabinet with the capability to handle hot water

and grease buildup.

The perfect quiet solution designed with low drain inlets which facilitate the installation of showers and bathtubs in heavy-duty residential or commercial applications.

Built-in check valves prevent any backup into the connecting fixtures.

ø 2" Drain

ø 11 ⁄2"

Drai

n

ø 1"

- 11 ⁄2 D

isch

arge

ø 2" Drain

Min 6"

ø 11 ⁄2"

Vent

17⁄8"141⁄2"

71⁄2"

101⁄2"

141⁄2"

2"

10"

11"

125 ⁄8"