spinneret 110 datasheet

1
7/17/2019 Spinneret 110 Datasheet http://slidepdf.com/reader/full/spinneret-110-datasheet 1/1  APPLICATIONS SPINNERET 110 SAFEGARD Synthetic Fiber Spinneret Head Release Lubricant. SPINNERET 110 SAFEGARD is a clear mixture of silicone and a cleaner/wiper solvent package. The cleaner/wiper solvent makes it easy to clean off any residue, which has accumulated on the spinneret head. The silicone prevents sticking ("dog legs") of the synthetic fibers to the spinneret. SPINNERET 110 SAFEGARD is a high quality lubricant that costs less per volume used and is economical through less frequent applications. Lower inventory, reduced maintenance, and extremely long wipe duration, are just a few of the realized cost savings. One can of SPINNERET 110 SAFEGARD outlasts standard aerosols up to 3 to 1. It will give you high performance, quality, and value. SPINNERET 110 SAFEGARD is typically sprayed up towards the bottom of the spinneret where the fibers are being extruded. After being sprayed, the operator wipes away (cleans) the bottom of the spinneret of any residue which might have accumulated. The solvent evaporates and the silicone remains behind to prevent any stray fibers from sticking to the bottom of the spinneret causing breakouts. SPINNERET 110 SAFEGARD with its specially designed extension tip delivers a fine, even spray pattern with no surges or spitting. You only spray what is necessary to do the job. With 100% dispersion, you get what you pay for, SPINNERET lubricant. No ozone depleting agents. Non-aerosol. Outlasts standard aerosols. Prevents breakouts. Cleans easily. Prevents "dog legs". TYPICAL AEROSOLS SPINNERET 110 SAFEGARD  Application Flashback YES NO Wasted Product YES NO Noxious Odor YES NO Continuous Spray 360 o NO YES The SAFEGARD spray system is environmentally friendly because it uses no ozone depleting agents as propellants. A rubber bladder system and air pressure forces the lubricant out delivering a fine continuous spray that can even be sprayed upside down. SPRAY LUBRICATION  ADVANTAGES TOTAL Lubricants USA, Inc. L i n d e n , N J 07036 5 North Stiles Street 908.862.9300/800.526.4127 R o c k i n g h a m , N C 28379 709 Airport Road 800.323.3198 / 800.526.4127 K n o x v i l l e , T N 37914 3315 Riverside Drive 800.323.3198 / 800.526.4127 TOTAL Lubricants USA, Inc. with a policy of continuous improvement, reserves the right to change specifications as our technology progresses. We are not responsible for the misuse and/or misapplication of our products. ©2008 All rights reserved. JAS 09/2008

Upload: vbscribd1234

Post on 09-Jan-2016

6 views

Category:

Documents


0 download

DESCRIPTION

Total Spinneret 110 Silicone spray datasheetIt is very useful for reading and learn about cleaning of spinneret.123456Testing of polyester spinningIts

TRANSCRIPT

Page 1: Spinneret 110 Datasheet

7/17/2019 Spinneret 110 Datasheet

http://slidepdf.com/reader/full/spinneret-110-datasheet 1/1

 APPLICATIONS

SPINNERET 110 SAFEGARD

Synthetic Fiber Spinneret Head Release Lubricant.

SPINNERET 110 SAFEGARD is a clear mixture of silicone and a cleaner/wipersolvent package. The cleaner/wiper solvent makes it easy to clean off any residue,which has accumulated on the spinneret head. The silicone prevents sticking ("doglegs") of the synthetic fibers to the spinneret.

SPINNERET 110 SAFEGARD is a high quality lubricant that costs less per volumeused and is economical through less frequent applications. Lower inventory, reducedmaintenance, and extremely long wipe duration, are just a few of the realized costsavings. One can of SPINNERET 110 SAFEGARD outlasts standard aerosols up to 3to 1. It will give you high performance, quality, and value.

SPINNERET 110 SAFEGARD is typically sprayed up towards the bottom of thespinneret where the fibers are being extruded. After being sprayed, the operator wipesaway (cleans) the bottom of the spinneret of any residue which might haveaccumulated. The solvent evaporates and the silicone remains behind to prevent anystray fibers from sticking to the bottom of the spinneret causing breakouts.SPINNERET 110 SAFEGARD with its specially designed extension tip delivers a fine,even spray pattern with no surges or spitting. You only spray what is necessary to dothe job. With 100% dispersion, you get what you pay for, SPINNERET lubricant.

No ozone depleting agents.

Non-aerosol.

Outlasts standard aerosols. Prevents breakouts.

Cleans easily.

Prevents "dog legs".

TYPICAL AEROSOLSSPINNERET 110

SAFEGARD

 Application Flashback YES NO

Wasted Product YES NO

Noxious Odor YES NO

Continuous Spray 360o

NO YES

The SAFEGARD spray sys tem is environmentally fr iendly because it uses no ozone depletingagents as propellants. A rubber bladder system and air pressure forces the lubricant outdelivering a fine continuous spray that can even be sprayed upside down.

SPRAY

LUBRICATION

 ADVANTAGES

TOTAL Lubricants USA, Inc.

L i n d e n , N J 0 7 0 3 6  

5 North Stiles Street908.862.9300/800.526.4127

Ro c k i n g h am , NC 2 8 3 7 9  

709 Airport Road800.323.3198 / 800.526.4127

K n o x v i l l e , T N 3 7 9 1 4  

3315 Riverside Drive800.323.3198 / 800.526.4127

TOTAL Lubricants USA, Inc. with a policy of continuous improvement, reserves the right to change specifications as our technology progresses.We are not responsible for the misuse and/or misapplication of our products. ©2008 All rights reserved. JAS 09/2008