splm
If you can't read please download the document
DESCRIPTION
SPLMTRANSCRIPT
1. Install Microsoft Loopback Adapter1) Log onto your laptop with a local Administrator account.2) Click Start > Control Panel.3) If you are in Category view, click Hardware and Sound > Device Manager;4) If you are in the Small Icons view: click Device Manager.5) In the Device Manager dialog window: Highlight Network Adapters (You can expend the list), Click Action on the menu bar, Select Add Legacy Hardware.6) Add Hardware dialog box opens. Click Next.7) Select Install the hardware that I manually select from a list (Advanced). Click Next.8) Select Network adapters in the list. Click Next.39) Select Microsoft in the Manufacturer box, and Microsoft Loopback Adapter in theAdd Hardware dialog box. Click Next.10) Click Next again to install Microsoft Loopback Adapter;11) Click Finish.42. Configure a Static IP for Loopback Adapter1) Log on to the laptop with a local administrator account.2) Click Start > Control Panel3) Double-click Network and Sharing Center (View by Small Icons)4) Select Change Adapter Settings on the right5) Right-click on the Loopback Adapter > rename it as SPLM Loopback Adapter.By default, the loopback adapter name is Local Area Connection #.6) Right-click on the Loopback Adapter > select Properties7) Highlight Internet Protocol Version 4 (TCP/IPv4) and then click Properties button.8) Select Use the following IP address option, then manually type in an IP.For example, IP 192.168.0.1, with Subnet mask of 255.255.0.0.(Check with your IT department if youre not sure which address is available to assign toit)9) Click on OK to dismiss the Internet Protocol TCP/IP Properties dialog.10) Click on OK to dismiss the Loopback Adapter Properties.53. Configure Advanced Settings for Loopback Adapter1) Log into the laptop with a local administrator account.2) Click Start > Control Panel > View by Small Icons..3) Click Folder Options > View tab > Turn on Always show menus option. CloseFolder Options window.4) Click Network and Sharing Center in Control Panel.5) Select Change Adapter Settings on the right.6) Select Advanced > Advanced Settings from the pull down menu7) The Advanced Settings dialog box displays.8) Under Adapters and Bindings, highlight SPLM Loopback Adapter and click theGreen up arrow, moving it to the top of the list.9) Click OK to dismiss the Advanced Settings Dialog.10) Dismiss the Network Connections dialog.11) Reboot the system to assure these changes are written to the registry before generating amachine ID using the SmartPlant License Manager utility.64. Install SPLM and Generate a Machine ID1) Log onto the laptop with a local administrator account.2) Download the latest SPLM software from the eCustomer websitehttps://crmweb.intergraph.com(Service > Download Software Updates > Products > SmartPlant License Manager)3) Open Control Panel > View by Small Icons > click Device Manager > Open NetworkAdapters list.4) Click View on the menu bar > click Show Hidden Devices.5) Right-click on the adapters and disable ALL network adapters EXCPT the MicrosoftLoopback Adapter in the list.6) Select Start > All Programs > Intergraph SmartPlant License Manager > GenerateMachine ID and save to a text file such as c:\MachineID.TXT.7) Back to the Device Managers dialog window, right-click and enable all the previouslydisabled network adapters.8) Send the Machine ID file to your regional office or contact Intergraph eLicense [email protected] to request a license key. Do not generate MachineID again after you sent out your Machine ID file to Intergraph and before youinstall your new license key.9) Open SPLM and select Install and Remove > Install License Key to install the licensekey you received from Intergraph.5. Add pdlice.exe onto Firewall Exception List1) Click Start > Control Panel > Windows Firewall2) Click Allow a Program or Feature through Windows Firewall3) Click Change Settings button.4) Click Allow another Programbutton.5) Click Browse button.6) Select pdlice.exe (by default, its C:\WIN32APP\INGR\SPLM\bin folder)7) Click Open button to close Browse window.8) Click Add button to close Add a Program dialog box.9) Back to the Allowed Programs window, select SPLM and click Details button inAllowed Programs list to make sure you see pdlice.exe in the file path, and then closethe dialog box.10) Back to the Allowed Programs dialog box, make sure Domain, Home/Work (Private)and Public all selected for SPLM.11) Click OK to close Firewall dialog window76. Test SPLM on Laptop1) Make sure your laptop works when its connected to the