spring 2018/no.115 jsmea · ships and marine technology seminar friday 13 april 10：30 10：50the...

Japan Ship Machinery and Equipment Association

Japan Ship Machinery & Equipment Association

SPRING 2018/No.115

JsmeaNews

CONTENTSOTC 2018 ...................................................... 1Sea Japan 2018 .......................................2-3 JSMEA makes debut at IFC in Russia ..4-5JSMEA, ClassNK organize Philippines-Japan Business Matching Forum .........6-7JSMEA attends Marintec China 2017 ....8-9JSMEA joins International WorkBoat Show 2017 ..... 10Information on JSMEA members ...... 11-19

BEMAC UZUSHIO ELECTRIC CO.,LTD.CHUGOKU MARINE PAINTS, LTD.DAIDO STEEL CO., LTD.HIEN ELECTRIC INDUSTRIES, LTD.EAGLE INDUSTRY CO., LTD.Mitsubishi Heavy Industries Marine Machinery & Equipment Co., Ltd.SASAKURA ENGINEERING CO., LTD.SEMCO LTD.Wärtsilä Japan Ltd.

JSMEA sets up new WG for developing overseas fishing vessel markets ..............20

At the Japan Pavilion, a total of 17 members—including INPEX Corporation; Japan Oil, Gas and Metals National Corporation (JOGMEC); JX Nippon Oil & Gas Exploration Corporation; operators; and machinery and equipment manufacturers—are joining together with support from The Nippon Foundation in setting up booths to provide up-to-date information and introduce cutting-edge technologies. Visit us at the Japan Pavilion!

Booth Nos. 7045, 7053 and 7145

EXHIBITORS

Teikoku Machinery Works, Ltd.

Ushio Reinetsu Co., Ltd.

Yanmar Co., Ltd.

INPEX CORPORATION

Japan Agency for Marine-Earth Science and Technology

MAYEKAWA MFG. CO., LTD.

Nippon Paint Marine Coatings Co., Ltd.

Tokyo Rope Mfg. Co., Ltd.

ClassNK

DAIDO STEEL CO., LTD.

Daihatsu Diesel Mfg. Co., Ltd.

Fuji Trading Co., Ltd.

Hien Electric Industries, Ltd.

Japan Drilling Co., Ltd. (JDC)

Japan Oil, Gas and Metals National Corporation (JOGMEC)

Shinko Ind. Ltd.

JX Nippon Oil & Gas Exploration Corporation

JSMEA to set up Japan Pavilion at OTC 2018

2 Jsmea News No. 115

JPN-17 JPN-20 JPN-41 JPN-42 JPN-49 JPN-52 JPN-57 JPN-65 JPN-71 JPN-87 JPN-103 JPN-131 JPN-151 JPN-175

JPN-15

JPN-13 JPN-14

JPN-16

JPN-11 JPN-10

JPN-09

JPN-07

JPN-05 JPN-06

JPN-03 JPN-04

JPN-01 JPN-02

JPN-40

JPN-35 JPN-38

JPN-36

JPN-31

JPN-27

JPN-23

JPN-46

JPN-45

JPN-53 JPN-61

JPN-69

JPN-83

JPN-99

JPN-95 JPN-96

JPN-91

JPN-125

JPN-119 JPN-120

JPN-113

JPN-147 JPN-148

JPN-143

JPN-139 JPN-140

JPN-135

JPN-171 JPN-172

JPN-165 JPN-166

JPN-163 JPN-164

JPN-157

JPN-158

JPN-196

JPN-192JPN-191

JPN-187

JPN-185 JPN-186

JPN-184

JPN-179 JPN-182

JPN-180

NYK TRADING

MITSUI E & S SHIPBUILDING

UTSUKI KEIKI

SATAKE

YAMASHINA SEIKI

Kyokuyo Electric

N.Y

MURAYAMA DENKI

MANABE ZOKI Japan Weather Association

SUCTION GAS ENGINE MFG.

The China & Japan Marine Industries

KOKOSHA

TAIKO SANGYO

USHIO REINETSU

AKASAKA DIESELS

SEKIGAHARA SEISAKUSHO NIPPON

HAKUYO ELECTRONICS

MATSUI

MUSASINO

Hien Electric Industries

SHIMADA

MINISTRY OF DEFENSE

Japan Coast Guard

Daido Steel

TEIKOKU MACHINERY WORKS

Maritime Report

Tokyo Nisshin Jabara

TECHNO KASIWA

TANABE PNEUMATIC MACHINERY

SHONAN

NISHISHIBA ELECTRIC

TAIKO KIKAI INDUSTRIES TERASAKI ELECTRIC

DAIHATSU DIESEL MFG.

TOKYO KEIKI

IBUKI KOGYO

Japan Engine

AZBIL

SASAKURA ENGINEERING

MITSUBISHI KAKOKI

HISAKA WORKS

BEMAC Uzushio Electric

YANMAR

CHUGOKUMARINEPAINTS

NABTESCO

JRCS MFG.

FUJI TRADING

OKUMURA ENGINEERING

EIZO HITACHI NICO TRANSMISSION

JAPAN RADIO

JFE ENGINEERING

NIIGATA POWER SYSYTEMS

Mitsubishi Heavy Industries Marine Machinery &

Equipment

Kurita Water Industries

FUJI ELECTRICHSN-KIKAI KOGYO

YOKOGAWA DENSHIKIKI

SHINKO

NAKASHIMA PROPELLER

WAKEFIELD

WOODS

NIPPON PAINT MARINE COATINGS

YAMATO METAL

KANAGAWA KIKI KOGYO

GEISLINGER

MIZUNO MARINE

TAIYO ELECTRIC

Kawasaki Heavy Industries

VOLCANO

ECO MARINE POWER

KEI SYSTEMCONHIRA

Daikin MR Engineering

Furukawa Electric Industrial Cable

TOBU JUKOGYO

NANIWA PUMP MFG.

2

3

1

9

86 4

5

10

7

Ship Owners

Presenting Area

Iot

Relations

Long CourseFerry

Energy-Saving andEnviromental Technologies

Drone Research

Development ofMarine Resources

Ministry ofDefence andJapan CoastGuard

The Thematic Zones



(JSMEA) joins Sea Japan as Japan Pavilion, supported by

the Nippon Foundation and consists of Japanese Maritime

Cluster and JSMEA members.

Japan Pavilion introduces cutting-edge technology,

products and service of of Japanese Maritime Cluster and

JSMEA members.

Japan Pavilion Layout

3Jsmea News No. 115

Sea Japan Seminars THE THEMATIC ZONE EXHIBITORS

Sea Japan 2018

Theme Company Name

Ship Owners Kawasaki Kisen Kaisha, Ltd. ("K" LINE)

Mitsui O.S.K Lines, Ltd. (MOL)

Nippon Yusen Kabushiki Kaisha (NYK Line)

OCEAN NETWORK EXPRESS (JAPAN) LTD.

Energy-Saving and Enviromental Technologies

USHIO REINETSU CO., LTD.

Kamome Propeller Co., Ltd.

KOBE STEEL, LTD.

Japan Marine United Corporation

TAIKO SANGYO CO., LTD.

DAIHATSU DIESEL MFG. CO., LTD.

TAIYO ELECTRIC CO., LTD.

Chugoku Marine Paints, Ltd.

NANIWA PUMP MFG. CO., LTD.

Nabtesco Corporation

NIIGATA POWER SYSYTEMS CO., LTD.

NGK INSULATORS LTD.

The Hanshin Diesel Works, Ltd.

Volcano Co., Ltd.

MITSUI E&S MACHINERY CO., LTD.

Mitsubishi Heavy Industries Marine Machinery & Equipment Co., Ltd.

Musasino Co., Ltd.

Meiyo Electric Co., Ltd.

Yanmar Co., Ltd.

Development of Marine Resources

INPEX Corporation

Japn Drilling Co., Ltd. (JDC)

Japan Agency for Marine-Earth Science and Technology (JAMSTEC)

Japan Oil, Gas and Metals National Corporation (JOGMEC)

National Maritime Research Institute (NMRI)

BEMAC Uzushio Electric Co., Ltd.

Kawasaki Heavy Industries, Ltd.

KOBE STEEL, LTD.

Teikoku Machinery Works, Ltd.


NIHON MARUKO Co., LTD.

MANABE ZOKI CO., LTD.

IoT Imabari Shipbuilding Co., LTd.

Japan Marine United Corporation

Suzuki Shipyard Co., Ltd.

TSUNEISHI SHIPBUILDING Co., Ltd.

FUKUOKA SHIPBUILDING CO., LTD.

Mitsui E&S Shipbuilding Co., Ltd.

Mitsubishi Shipbuilding Co., Ltd.

MITSUBISHI HEAVY INDUSTRIES MARINE STRUCTURE

The University of Tokyo

The Japan Society of Naval Architects and Ocean Engineers

KOBE STEEL, LTD.


MANABE ZOKI CO., LTD.

Smart Ship Application Platform 2 Project (SSAP2)

Drone NIPPON KAIJI KYOKAI (ClassNK)

Tsuneishi Holdings Corporati / V-cube Robotics, Inc.

Sony Business Solutions Corporation

NEC Corporation

Long CouLong Course Ferryrse Ferry

Ocean Trans Co., Ltd.

MOL Ferry Co., Ltd.

Shinnihonkaiferry Co., Ltd.

Taiheiyo Ferry Co., Ltd.

Hankyu Ferry Co., Ltd.

Ferry Sunflower Limited

Miyazaki Car Ferry Co., Ltd.

Meimon Taiyo Ferry Co., Ltd

The Japan Railway Construction, Transport and Technology Agency (JRTT)

Research The University of Tokyo

Tokyo University of Marine Sciane and Technology

Yokohama National University

Japan Ship Technology Research Association

Shipbuilding Research Centre of Japan

Ministry of Defence and Japan Coast Guard

Japan Coast Guard (JCG)

MINISTRY OF DEFENSE

Acquisition, Technology & Logistics Agency (ATLA)

Ships Classification NIPPON KAIJI KYOKAI (ClassNK)

Relations Ministry of Land, Infrastructure, Transport and Tourism (MLIT)

The Shipbuilders' Association of Japan (SAJ)

The Cooperative Association of Japan Shipbuilders (CAJS)

Japan Ship Machinery and Equiopment Association (JSMEA)

JPN-17 JPN-20 JPN-41 JPN-42 JPN-49 JPN-52 JPN-57 JPN-65 JPN-71 JPN-87 JPN-103 JPN-131 JPN-151 JPN-175

JPN-15

JPN-13 JPN-14

JPN-16

JPN-11 JPN-10

JPN-09

JPN-07

JPN-05 JPN-06

JPN-03 JPN-04

JPN-01 JPN-02

JPN-40

JPN-35 JPN-38

JPN-36

JPN-31

JPN-27

JPN-23

JPN-46

JPN-45

JPN-53 JPN-61

JPN-69

JPN-83

JPN-99

JPN-95 JPN-96

JPN-91

JPN-125

JPN-119 JPN-120

JPN-113

JPN-147 JPN-148

JPN-143

JPN-139 JPN-140

JPN-135

JPN-171 JPN-172

JPN-165 JPN-166

JPN-163 JPN-164

JPN-157

JPN-158

JPN-196

JPN-192JPN-191

JPN-187

JPN-185 JPN-186

JPN-184

JPN-179 JPN-182

JPN-180

NYK TRADING

MITSUI E & S SHIPBUILDING

UTSUKI KEIKI

SATAKE

YAMASHINA SEIKI

Kyokuyo Electric

N.Y

MURAYAMA DENKI

MANABE ZOKI Japan Weather Association

SUCTION GAS ENGINE MFG.

The China & Japan Marine Industries

KOKOSHA

TAIKO SANGYO

USHIO REINETSU

AKASAKA DIESELS

SEKIGAHARA SEISAKUSHO NIPPON

HAKUYO ELECTRONICS

MATSUI

MUSASINO

Hien Electric Industries

SHIMADA

MINISTRY OF DEFENSE

Japan Coast Guard

Daido Steel

TEIKOKU MACHINERY WORKS

Maritime Report

Tokyo Nisshin Jabara

TECHNO KASIWA

TANABE PNEUMATIC MACHINERY

SHONAN

NISHISHIBA ELECTRIC

TAIKO KIKAI INDUSTRIES TERASAKI ELECTRIC

DAIHATSU DIESEL MFG.

TOKYO KEIKI

IBUKI KOGYO

Japan Engine

AZBIL

SASAKURA ENGINEERING

MITSUBISHI KAKOKI

HISAKA WORKS

BEMAC Uzushio Electric

YANMAR

CHUGOKUMARINEPAINTS

NABTESCO

JRCS MFG.

FUJI TRADING

OKUMURA ENGINEERING

EIZO HITACHI NICO TRANSMISSION

JAPAN RADIO

JFE ENGINEERING

NIIGATA POWER SYSYTEMS

Mitsubishi Heavy Industries Marine Machinery &

Equipment

Kurita Water Industries

FUJI ELECTRICHSN-KIKAI KOGYO

YOKOGAWA DENSHIKIKI

SHINKO

NAKASHIMA PROPELLER

WAKEFIELD

WOODS

NIPPON PAINT MARINE COATINGS

YAMATO METAL

KANAGAWA KIKI KOGYO

GEISLINGER

MIZUNO MARINE

TAIYO ELECTRIC

Kawasaki Heavy Industries

VOLCANO

ECO MARINE POWER

KEI SYSTEMCONHIRA

Daikin MR Engineering

Furukawa Electric Industrial Cable

TOBU JUKOGYO

NANIWA PUMP MFG.

2

3

1

9

86 4

5

10

7

Ship Owners

Presenting Area

Iot

Relations

Long CourseFerry

Energy-Saving andEnviromental Technologies

Drone Research

Development ofMarine Resources

Ministry ofDefence andJapan CoastGuard

The Thematic Zones

　 International Maritime SeminarWednesday 11 April

S-19：30▶ Opening Ceremony Session 1 : Keynote Speech 10：00▶10：10 Opening Address

Ministry of Land, Infrastructure, Transport and Tourism10：10▶10：35 Keynote Speech

Mr. Mitsuyuki Unno, Executive Director, The Nippon Foundation10：35▶11：00 Keynote Speech

Norwegian Ministry of Trade, Industry and Fisheries

Session 2 : Southeast Asia Maritime Summit 11：00▶11：10 Opening Remarks for Session 2

Moderator: Mr. Hiroaki Sakashita, Advisor, Nippon Hakuyohin Kentei Kyokai

11：10▶11：15 Japanese Maritime Industry and Southeast Asian MarketDr. Shinichiro Otsubo, Senior Deputy Director-General,

Maritime Bureau Ministry of Land, Infrastructure, Transport and Tourism11：15▶11：40 Current State and Future Prospects of Marine

Industries in Southeast Asia ・Indonesia: Mr. Johnson W. Sutjipto, Chairman, Indonesian National Shipowners’ Association (DPP INSA)

・Malaysia: Mr. Abdul Hak Md Amin, Chairman, Malaysia Shipowners’ Association・Philippines: Mr. Roy R. Alampay, Chairman/President, Filipino Shipowners’ Association

・Thailand: Mr. Bhumindr Harinsuit, Chairman, Thai Shipowners’ Association・Singapore: Singapore Shipping Association(TBC)

11：40▶11：45 Future of Japanese Ship Machinery and Equipment Industry

Mr. Masaharu Ono, Vice chairman, Japan Ship Machinery and Equipment Association11：45▶12：25

Panel Discussion12：25▶12：30

Closing Remarks

　 Ships and Marine Technology SeminarFriday 13 April

10：30▶10：50 The Opening Address and Introduction of Maritime Policies (i-Shipping)

Mr. Takemasa Minemoto, Director, Boat Affairs Office

Shipbuilding and Ship Machinery Division Maritime Bureau

10：30▶10：50 R&D on Structural Health Monitoring for Large Container Carriers

Mr. Yasushi Yamamoto,

Deputy General Manager, Technical Group, NYK Line

11：40▶12：10 Enhancement of SPEEDS (Smart Platform of Enhanced Engineering Data for Shipping and Shipbuilding)　-Information Platform for Maritime Industries to Realize the Innovative Use of Ship 3D Data-

Professor Kunihiro Hamada，Dr. Eng. Chairman of the Project Research Committee P-55, Japan Society of

Naval Architects and Ocean Engineers (Professor, HIROSHIMA UNIVERSITY)

13：10▶13：40 Maritime Innovation using Digital Technologies- From a Standpoint of Classification Society-

Mr. Toshiyuki Matsumoto,

Director of Research Institute, ClassNK

Introduction of SSAP2 Project 13：50▶14：35（1） The Role of Open Platform in the Coming

Era of Ship DigitalizationDr. Hideyuki Ando,

Senior General Manager, MTI (Chairman of Smart Ship Application Platform 2 (SSAP2) Project)

（2） International Standardization Efforts from Japan to Promote the Use of Ship IoT Data

（ISO/FDIS 19847,19848）14：35▶14：55 ① Introduction of ISO/FDIS 19847（Shipboard

data server to share field data at sea）Mr. Takashi Yamada,

Expert IT Innovation Management Group, UZUSHIO ELECTRIC CO,. LTD.

14：55▶15：15 ② Introduction of ISO/FDIS 19848（Standard data for shipboard machinery and equipment）

Mr. Mineyuki Morimoto, Assistant Manager Development and Design Section Development

and Design Department System Division, TERASAKI ELECTRIC CO., LTD.15：15▶15：50（3） Activities of ShipDC, the Foundation for a

‘Productivity Revolution’ in Maritime Affairs, and Cooperation with the SSAP Project

Mr. Takashi Nagatome,

Representative Director and President Ship Data Center Co., Ltd.16：00▶16：30 Opportunities to Use Engine-plant Simulators

and Introduce the IoT in Maritime Affairs Education

Mr. Takashi Miwa, Chairman, Research Committee for Engine-Plant

Simulators, The Japan Institute of Marine Engineering （Kobe University, Graduate school of Maritime Sciences, Lecturer）

Sea Japan 2016

Japan Pavilion Layout

　 International Maritime Seminar 　 Ships and Marine Technology Seminar

MITSUI ENGINEERING &

SHIPBUILDING CO., LTD.

changes new company name

from 1st April.


Japan Ship Machinery and Equipment Association (JSMEA) attended the International Fishery Congress (IFC) in Vladivostok, Russia for the first time on Oct. 5-6, 2017. With financial assistance from The Nippon Foundation, Mr. Katsuhiko Fujiwara, vice-chairman, JSMEA/chairman, JSMEA’s Overseas Market Development Committee (executive officer, Yanmar Co., Ltd./general manager, Yanmar’s Tokyo Office) and Mr. Shuzo Ueda, leader of JSMEA’s Overseas Fishing Vessel Market Development Working Group (general manager, Marine Business Department, Marine System Division, Japan Radio Co., Ltd.) led a delegation of nine member companies. It was the third time that JSMEA had organized a market development project in Russia, with the previous two being seminars in Vladivostok and St. Petersburg, in 2013 and 2014, respectively.

The 12th IFC welcomed 770 attendees over two days (496 on Day 1 and 272 on Day 2), which attested to the popularity of the event. Many individuals in the public and private sectors came from all over Russia, including officials of the central and local governments engaged in the seafood business, representatives of fisheries organizations and fishing vessel owners. The attendees also included those from 15 other economies (refer to the outline of the 12th IFC below). JSMEA was a sponsor in the congress.

As part of the efforts that JSMEA launched earlier

in fiscal 2017 to develop markets for fishing vessels outside Japan, its participation at the IFC was to meet the growth in worldwide demand for fisheries products. The association aimed to collect information also on the fishing boat market and relevant policies of Russia, where plans were on the table to modernize the local fishing industry and to construct newbuildings to replace aging vessels. Furthermore, JSMEA sought to extensively promote machinery and equipment for fishing vessels made in Japan and relevant services provided by Japanese manufacturers.

At the opening session on Day 1, Mr. Noboru Ando, managing director, JSMEA, introduced Mr. Fujiwara, Mr. Ueda and member companies, giving the speech entitled “Innovations in the Fisheries Industry—Momentum of Effective Use and Conservation of the Global Sea Wealth”, which was the main topic of the 12th IFC. Mr. Ando emphasized that Japanese ship machinery and equipment manufacturers can contribute to the modernization of fishing vessels and technologies in Russia.

A roundtable session was held on Day 2, focusing on prospects for investment in and development of the fisheries industry. Mr. Fujiwara gave the opening address, followed by the attending members introducing the latest of their respective technologies and products.

JSMEA had a Japan desk near the conference hall on both days, and attracted so many visitors that members

JSMEA makes debut at IFC in Russia

Mr. Pavel Shikov (front row, center) and Mr. Andrey Surzhenko, surveyor, RS (front row, right)

Day 1 at the 12th IFC

JSMEA pays courtesy call at RS

JSMEA pays courtesy visit to Consulate-General of Japan in Vladivostok

Day 2 at the 12th IFCMr.Tatsuhiko Kasai, consul-general of Japan in Vladivostok (seated,center)

Attending companies give presentations on Day 2.

5Jsmea News No. 115

JSMEA makes debut at IFC in Russia

quickly ran out of the catalogs they had brought from Japan. The association continued to work during a reception that it organized after the event to build relations with interested parties from Russia and market members’ products by distributing their catalogs. JSMEA had produced a Russian-language booklet to introduce the attending member companies, which was included in the package of materials prepared by the IFC and distributed to attendees.

Taking advantage of the trip made to attend the 12th IFC, a JSMEA delegation visited Mr. Pavel Shikov, new chief operating officer at the Far East branch office of the Russian Maritime Register of Shipping (RS). JSMEA also visited Mr. Tatsuhiko Kasai, consul-general of Japan in Vladivostok, at the consulate-general. At that time, the consulate outlined the economies of coastal areas in Russia. Members asked consulate staff questions about local fisheries affairs and exchanged views on similar subjects.

JSMEA will report findings from its trip to Russia to discuss future related actions when convening meetings of its Overseas Market Development Working Group, Overseas Fishing Vessel Market Development Working Group, Overseas Market Development Committee, Global Strategic Plan Review Board and other in-house units.

JSMEA members attending 12th IFC: Akasaka Diesels Ltd.; The Hanshin Diesel Works, Ltd.; Isodametal Co., Ltd.;Kamome Propeller Co., Ltd.; Maekawa Mfg. Co., Ltd.; Nagasaki Marine Service Co., Ltd.; Nippon Paint Marine Coatings Co., Ltd.; Taiyo Electric Co., Ltd.Yanmar Co., Ltd.

Outline of 12th IFC1) Dates: Oct. 5-6, 20172) Venues: Large Hall, Administration of Primorsky Region (Oct. 5) and Diamond Hall, Business Center, Hotel Hyundai (Oct. 6)3) Organizers: Association of Primorye Fish Industry Companies, Far East Crab Catchers Association, Far Eastern Union of Mariculture Enterprises, government of Primorye Krai and Pollack Catchers Association4) Sponsors: JSMEA, Marine Bank, Marine Services Group (MSG), Mi tsub ish i Mar ine Eng ine and PocrocCTpax5) Countries with exhibitions: Australia, Canada, Chile, China, France, Iceland, Japan, Netherlands, Norway, Russia, South Korea, Thailand, U.S., U.K. and Vietnam6) Proceedings: <Oct. 5>Registration of participants Opening ceremony Plenary session: “Innovations in the Fisheries Industry—Momentum of Effective Use and Conservation of the Global Sea Wealth, its Impact on the World Market” Roundtable discussion 1: “Information Technologies and Innovations in Fisheries for the State and Business” State reception (on behalf of Mr. Vladimir V. Miklushevsky, governor, Premorsky) <Oct. 6>Registration of participantsRoundtable discussion 2: “Aquaculture and Fisheries Partnerships or Competition” Roundtable discussion 3: “Prospect of Investment Development of the Fisheries Industry,” “Innovation Projects” and “Russian and International Practices” Closing: summary of meeting and adoption of final resolution

Members talk to visitors at the Japan desk. A grand reception is organized at the 12th IFC.


Japan Sh ip Mach ine r y and Equ ipmen t Association (JSMEA) organized a “Japan Day” event on Feb. 22 in Manila. It was co-hosted by Nippon Kaiji Kyokai (ClassNK) and financially supported by The Nippon Foundation.

Following a seminar on seafarer-related matters that ClassNK held in the morning, JSMEA together with the classification society in the afternoon convened a Philippines-Japan Business Matching Forum. The forum was inaugurated with the opening address by Mr. Katsuhiko Fujiwara, vice-chairman of JSMEA, encouraging 11 member companies to give presentations on their latest products and other features, focusing on energy saving, after-sales services and eco-friendliness.

JSMEA and ClassNK had the following leaders give briefings on up-to-date maritime affairs in the

Philippines: Mr. Dario R. Alampay, Jr., chairman of the Filipino Shipowners Association (FSA); Mr. Christopher S. Pastrana, chairman of Philippine Inter-Island Shipping Association, Inc. (PISA); and Mr. Jesse Ho Maxwell, chairman of Philippine Petroleum Sea Transpor t Associat ion, Inc. (PHILPESTA).

Prior to holding the Philippines-Japan Business Matching Forum, JSMEA and ClassNK had received great cooperation from the Maritime Industry Authority (MARINA) as well as the FSA, PISA and PHILPESTA. They str ived to carry out public relations activities to widely circulate information on the event to parties concerned with maritime affairs in the Philippines. As a consequence, the forum venue was filled with many local guests, which numbered some 170 (not including those from Japan). The meeting was so

JSMEA, ClassNK Organize Philippines-Japan Business Matching Forum

Mr. Ramon C. Hernandez, director II, Shipyard Registration Service, MARINA (seated, left); Ms. Sonia B. Malalauan, director II, Domestic Shipping Service, MARINA (seated, right); Mr. Shoichi Kitamura, executive managing director, JSMEA (standing, second from right) and Mr. Noboru Ando, managing director, JSMEA (standing, far right)

Mr. Dario R. Alampay, Jr. delivers a presentation. Mr. Christopher S. Pastrana gives a briefing on maritime affairs.

Mr. Katsuhiko Fujiwara gives the opening address.

Mr. Jesse Ho Maxwell also appears on stage for a speech.

JSMEA pays courtesy call to MARINA

7Jsmea News No. 115

JSMEA, ClassNK Organize Philippines-Japan Business Matching Forum

successful as to see none of the attendees leave in the middle, and came to an end with the closing address by Mr. Reijiro Urabe, leader of JSMEA’s Overseas Market Development Working Group.

Right outside the forum venue, the 11 JSMEA members prepared desks for business negotiations, making efforts to exchange information with local customers and potential customers.

After the Philippines-Japan Business Matching For um, JSMEA teamed up w i th C lassNK again to organize a networking reception. Mr. Koichi Fujiwara, chairman and president of the classification society, gave the opening remarks. Members of the JSMEA mission developed relations with many representatives from the Filipino maritime industry, as many of the Japan Day guests continued to attend the reception.

JSMEA plans to report findings from its attendance at the Philippines-Japan Business Matching Forum when convening meetings of its Overseas Market Development Committee, Overseas Market Development Working Group, Global Strategic Plan Review Board and other in-house units to discuss what actions it can take in the future.

Outline of “Japan Day” Philippines-Japan Business Matching Forum

Date: Thursday, Feb. 22, 2018Venue: Diamond Hotel PhilippinesURL: http://www.jsmea.or.jp/en/seminar/2018/philippines/Attending JSMEA members: Daihatsu Diesel Mfg. Co., Ltd.; The Hanshin Diesel Works, Ltd.; Kanagawa Kiki Kogyo Co., Ltd.; KEMEL Asia Pacific Pte. Ltd.; Nabtesco Corporation; Nakashima Propeller Co., Ltd.; Taiko Kikai Industries Co., Ltd.; Taiyo Electric Co., Ltd.; Uzushio Electric Co., Ltd. Volcano Co., Ltd. and Yanmar Co., Ltd.

The forum venue is filled to capacity. The forum venue is filled to capacity.

JSMEA members prepare tables for business negotiations. Mr. Reijiro Urabe gives the closing address. Ms. Sonia B. Malalauan delivers a speech during the reception.

A memorial photo of attendees


Japan Sh ip Mach ine r y and Equ ipmen t Association (JSMEA) attended, with financial support from The Nippon Foundation, Marintec China 2017 at the Shanghai New International Expo Centre on Dec. 5-8.

JSMEA opened its Japan Pavilion together with 28 member companies and Nippon Kaiji Kyokai (ClassNK) to welcome many visitors throughout the event, taking advantage of the pavilion’s prime location close to a venue entrance, where other major countries had their national pavilions.

A presentation area was set up at the Japan Pavilion, where nine members were situated to make introductions and showcase their respective products. Many visitors stopped by the area for the presentations, indicating that it was effective enough to attract visitors to the pavilion and provide them with information.

Marintec China, one of the greatest exhibitions in Asia, was held for the 19th time last year. According to the organizers, approximately 2,100 exhibitors from 31 economies were present, while the number of visitors was some 65,000.

On Dec. 4, a day before the opening of Marintec

China 2017, Mr. Shinzo Yamada, chairman of JSMEA (president of Taiyo Electric Co., Ltd.) and other executives paid a courtesy visit to the Consulate-General of Japan in Shanghai. The delegation met with Mr. Kazuyuki Katayama, consul-general, and exchanged views and opinions on an outline of the exhibition as well as the present state of the Japanese ship machinery and equipment industry and China.

On Dec. 5, at the start of Marintec China 2017, an opening ceremony was conducted for the Japan Pavilion. Mr. Yamada was joined by Mr. Katayama and Mr. Junichiro Iida, executive vice-president of ClassNK, to cut the ribbon. The consul-general visited and boosted exchanges with exhibitors at the pavilion.

In the afternoon, a meeting was convened among JSMEA’s chairman, vice-chairmen and Mr. Guo Dacheng, president of the China Association of the National Shipbuilding Industry (CANSI). They exchanged information and opinions on Chinese shipbuilding as well as Chinese and Japanese ship machinery and equipment industries.

In the evening, JSMEA teamed up with ClassNK

JSMEA attends Marintec China 2017

Mr. Shinzo Yamada (seated, left); Mr. Kazuyuki Katayama (seated, right); Mr. Shoichi Kitamura (standing, third from left); Mr. Masayuki Miyachi, consul (standing, third from right) and Mr. Noboru Ando (standing, second from right)

From left: Mr. Junichiro Iida, Mr. Kazuyuki Katayama and Mr. Shinzo Yamada

JSMEA pays courtesy visit to Consulate-General of Japan in Shanghai

Japan PavilionConsul-General Katayama visits Japan Pavilion

Opening ceremony for Japan Pavilion

Presentations given at Japan Pavilion

9Jsmea News No. 115

JSMEA attends Marintec China 2017

Mr. Junichiro Iida extends greetings on behalf of ClassNK.

Seated, from left: Mr. Guo Dacheng and Mr. Shinzo Yamada. Standing, from left: Mr. Xie Yu, Mr. Zheng Yi Ming, Ms. Tan Nai Fen, Mr. Shigeki Kinoshita, Mr. Masaharu Ono, Mr. Yukio Furuno, Mr. Katsuhiko Fujiwara, Mr. Shoichi Kitamura and Mr. Noboru Ando

Mr. Kazuyuki Katayama proposes a toast.

From left: Mr. Guo Dacheng and Mr. Shinzo Yamada Mr. Guo Dacheng returns greetings as a guest.Mr. Shinzo Yamada gives an address on behalf of JSMEA. Mr. Masaharu Ono makes closing remarks.

to organize a get-together in Shanghai to encourage representatives from the Japanese shipbuilding and ship machinery and equipment industries to build relations with their Chinese counterparts. The event was attended by approximately 200 people, including Mr. Katayama. From China, Mr. Guo and some 70 other individuals concerned with maritime affairs were present. A lottery was held during the party, through which attendees received gifts donated by JSMEA members and ClassNK. The get-together concluded with a jovial air.

Outline of JSMEA attendance at Marintec China 20171) Area of exhibitions: 730 square meters2) Number of exhibitors: 28 (27 running booths and one displaying panels)3) Exhibitors running booths (alphabetical order): Daihatsu Diesel Mfg. Co., Ltd.; Daikin MR Engineering, Ltd.; Fuji Trading Co., Ltd.; Ibuki Kogyo Co., Ltd.; Japan Engine Corporation; JFE Engineering Corporation; Kamome Propeller Co., Ltd.; Kawasaki Heavy Industries, Ltd.; Kanagawa Kiki Kogyo Co., Ltd.; Manabe Zoki Co., Ltd.; Marine Hydrotec Co., Ltd.; Mitsubishi Heavy Industries Marine Machinery and Equipment Co., Ltd.; Mitsubishi Kakoki Kaisha, Ltd.; Musasino Co., Ltd.; Nabtesco Corporation; Nakashima Propeller Co., Ltd.; Naniwa Pump Mfg. Co., Ltd.; Nico Precision Co., Ltd.; Niigata Power System Co., Ltd.; Nippon Hakuyo Electronics, Ltd.; Nippon Paint Marine Coatings Co., Ltd.;

Shinko Ind. Ltd.; Taiyo Electric Co., Ltd.; Tanabe Pneumatic Machinery Co., Ltd.; Ushio Reinetsu Co., Ltd.; Uzushio Electric Co., Ltd. and Yanmar Co., Ltd./displaying panels: Riken Corporation Outline of Meeting with CANSI1) Time/date: 17:15-18:00/Tuesday, Dec. 5, 20172) Venue: VIP Room, 7th floor, Oriental Riverside Hotel Shanghai3) Members—(JSMEA): Mr. Shinzo Yamada, chairman (president of Taiyo Electroc Co., Ltd.); Mr. Shigeki Kinoshita, vice-chairman (president of Daihatsu Diesel Mfg.Co.,Ltd.); Mr. Masaharu Ono, vice-chairman (chairman of Fuji Trading Co., Ltd.); Mr. Yukio Furuno, vice-chairman (president of Furuno Electric Co., Ltd.); Mr. Katsuhiko Fujiwara, vice-chairman (executive officer and Tokyo Office general manager of Yanmar Co., Ltd.); Mr. Shoichi Kitamura, executive managing director; and Mr. Noboru Ando, managing director/(CANSI): Mr. Guo Dacheng, president; Ms. Tan Nai Fen, vice-secretary-general; Mr. Zheng Yi Ming, deputy director and Mr. Xie Yu, assistant director

Outline of Japan-China shipbuilding/ship machinery and equipment get-together1) Time/date: 18:30-20:30/Tuesday, Dec. 5, 20172) Venue: Pear l Room, 7th floor, Or iental Riverside Hotel Shanghai3) Guests: Mr. Guo Dacheng, Mr. Kazuyuki Katayama and approximately 70 individuals from China concerned with maritime affairs

JSMEA meets with CANSI

Japan-China shipbuilding/ship machinery and equipment get-together


Japan Ship Machinery and Equipment Association (JSMEA), accompanied by three member companies, took part in the International WorkBoat Show 2017 in New Orleans on Nov. 29-Dec. 1, 2017.

The International WorkBoat Show exhibits offshore support vessels (OSVs), towboats for cargo barges, patrol vessels, tugboats and fishing vessels operated in U.S. coastal waters and rivers as well as other markets. It is attended by more than 1,000 enterprises, including marine architects, shipbuilders and ship machinery and equipment manufacturers. In the past, engine, navigational instrument and other Japanese makers, including JSMEA members, had showcased their products and services at the event individually. In response to mounting interest in U.S. workboats among member companies, JSMEA decided to attend the show for the first time in 2016, making last year’s appearance the second time.

At the International WorkBoat Show 2017, JSMEA—which teamed up with Maritime Reporter and Engineering News, a U.S. magazine covering maritime affairs—opened a booth near a venue entrance, where there was heavy traffic from its many visitors. At the booth, printed media were distributed with information on members’ products for different categories, such as general commercial vessels, OSVs and fishing boats, as well as contact details. JSMEA also visited U.S. shipyards, ship designers and other participants to promote members’ products and

services. When visiting the Conrad Shipyard, LLC booth, JSMEA reunited with Mr. Scott J. Theriot, executive vice-president and COO, again marketing members’ products and services. JSMEA called at the shipyard in 2016, which won a contract earlier in 2017 to build a liquefied natural gas (LNG) bunker barge.

To enhance its relations with OSV owners, JSMEA paid a visit to the head office of the Offshore Marine Service Association (OMSA), a New Orleans-based organization of ship owners, for sales and marketing activities for members.

The JSMEA mission also inspected the engine room of a steamboat, which moves steam pistons to spin paddle wheels, run on the Mississippi River.

JSMEA decided to report findings from the International WorkBoat Show 2017 and the views it had gathered from exchanges with local enterprises when the Global Strategic Plan Review Board and other in-house units convene meetings, and to continue to hold discussions to develop markets overseas.

Outline of JSMEA participation in International WorkBoat Show 20171) Area of Japan booth: 18 square meters2) Number of exhibitors: 3 (Naniwa Pump Mfg. Co., Ltd.; Taiyo Electric Co., Ltd. and Takashina Life Preservers Co., Ltd.)

JSMEA joins International WorkBoat Show 2017

JSMEA opens Japan booth at International WorkBoat Show 2017

The Japan booth enjoys its good location near an entrance.

Many non-JSMEA enterprises from Japan are also present.

Ships are operated on the Mississippi River route.In the engine room, steam pistons are on the left, while on the right are steam condensers.

JSMEA inspects steamboat

11Jsmea News No. 115

JSMEA joins International WorkBoat Show 2017/Information on JSMEA members

Integrated Dynamic Positioning System

OverviewWe have developed an original Dynamic Positioning

System which controls a vessel on a required position and heading automatically. We can also supply alarm monitoring system and power management system as a package for the offshore support vessels working at the

ocean energy development and the marine resources site. This system meets the standard ABS’s “Guide for Dynamic Positioning System DPS-2 notation”. Since the system is equipped redundant CPUs, communication line, power supply, and so on, it carries on control even if something goes wrong with the system.

BEMAC UZUSHIO ELECTRIC CO., LTD.105 Noma, Imabari, Ehime, 794-8582, JapanTel.: +81-898-25-8282 E-MAIL: [email protected]://www.bemac-uzushio.com/en/

Type ApprovalThe DP system has obtained the type approval of the ABS classification.

DPS Control Mode◦ Auto position/Auto heading

◦ Joystick with auto position/auto heading

◦ Model control

◦ Auto tracking

◦ Independent manual thruster control

Overview of Display◦ Position Plot display

◦ Joystick display

◦ Thruster display

◦ Generator and Power line diagram display

◦ Sensor and position reference system display

◦ Trend display

◦ Alarm display

Model Ship TestWe manufactured a 1/40 sized offshore support model ship and we ran a station keeping test in the tank against the wind and wave assumed on the real ocean.


Spectacular Performance of CMP’s High-end Antifouling

CHUGOKU MARINE PAINTS, LTD.Tokyo Club Building, 2-6, Kasumigaseki 3-chome, Chiyoda-ku, Tokyo, 100-0013, JapanTel.: +81-3-3506-3951 Fax: +81-3-5511-8541http://www.cmp.co.jp/global.html

SEAFLO NEO CF PREMIUM , a premium antifouling of CMP has been on the market since last year and welcomed by many ship owners with their expectations on its spectacular performance and potential. The launching was exactly an achievement made by many trial applications and a considerable mile stone in the history of antifouling. In fact, it has been applied to nearly 100 vessels and keeping the hulls clean.

High standard, High expectations.

Barnacle free (1-year performance after long anchorage)

Slime free (24-month performance, SEAFLO NEO CF PREMIUM on left)

About CMPSince its establishment in Hiroshima in 1917,

Chugoku Marine Paints, Ltd. (CMP) has uniquely developed marine paints as its core products, together with other specialized paints for industrial use.

CMP products are designed and developed

“Barnacle free & Slime free” is the feature of SEAFLO NEO CF PREMIUM which is empowered by CMP’s patented technology using a unique biocidal agent “Selektope?” (Medetomidine) developed by pharmacological approach.

In 2018 onward, SEAFLO NEO CF PREMIUM continues to be adopted to a number of new building vessels.

based on focused research act iv i t ies, and distributed via our highly organized global service network.

Now CMP is a major marine paint manufacturer and operates in 35 countries with 105 locations worldwide.


New material for exhaust valve spindle “DSA760”

Daido Steel Co.,Ltd.Tokyo office:6-35,8th Floor, Daido shinagawa building, 6-35,Konan 1-choume, Minato-ku, Tokyo, 108-8478 JapanTel.: +81-3-6704-0049 Fax: +81-3-5495-6742 https://www.daido.co.jp/en/index.html

OutlineDaido Steel Co.,Ltd. developed “DSA760” material. “DSA760” has superior properties such as high hardness and excellent corrosion resistance to many chemicals at high temperature.

Chemical composition [Table.1]High Cr content and appropriate Al content achieve high hardness and good corrosion resistance at high temperature.

Corrosion resistance [Fig.1]Excellent corrosion resistance against sulfur and vanadium salt in comparison to NIMONIC80A.

Mechanical strength [Fig.2]Mechanical strength is almost equal as NIMONIC80A.

Production capability [Table.3]Daido Steel Co.,Ltd. can supply various sizes of exhaust valve spindle.

AchievementDaido Steel Co.,Ltd.has applied “DSA760” for exhaust valve spindle of ship 2-stroke diesel engine for several years. “DSA760” is realized ; ◦ Smaller bottom burn off rate than NIMONIC80A. ◦ Excellent spindle seat condition with no dent mark.

Material Ni Cr Mo Nb+Ta Ti Al

DSA760 Balanced 37.0-39.0 — — — 3.0-4.0

NIMONIC80A Balanced 18.0-21.0 — — 1.8-2.7 1.0-1.8

INCONEL625 ≧ 58.0 20.0-23.0 8.0-10.0 3.15-4.15 ≦ 0.40 ≦ 0.40

[Manufacturing] Initial product of DSA760

exhaust valve spindleMelting

　⬇

Ingot

Casting

　⬇Rough Forging

　⬇

Die Forging

　⬇Heat Treatment

　⬇Machining

Arc Furnace/Vacuum Induction Furnace

Radial Forging Press

Φ 470

1670

Table.1 Typical chemical composition of materials for exhaust valve spindle (wt%)

Fig.1 Corrosive weight loss by sulfur and vanadium salt coating tests

　　 at 800℃ for 20hours. Fig.2 Tensile strength at room temperature and 500℃ .

Dimension

D1 Max.540mm

D2 Max.120mm

L Max.2200mm

Table.3 Production capability of DSA760 valve spindle

Remarks:INCONEL and NIMONIC are trademarks of the Special Metals Corporation group of companies. DSA is trademarks of the Daido Steel Co.,LTD.

L

D2D1

Room temperature 500℃

Condition:DSA760-aged (800℃ x24h)NIMONIC80A-aged (700℃ x16h)

Information on JSMEA members

140

120

100

80

60

40

20

0

1600

1400

1200

1000

800

600

Wei

ghtlo

ss (

mg/

cm2 )

Str

ess

(MP

a)

DSA760NIMONIC80A

0.2% YS 0.2% YSTS TS

Test condition800℃ /20hoursS : 90%Na2SO4+10%NaClV : 85%V2O5+15%NaSO4

DSA760 NIMONIC80A

S attackV attack


SHIPBOARD CABLEIEC 60092 & JIS C 3410

HIEN ELECTRIC INDUSTRIES, LTD.505, Shinshibakawa Bldg., 3-4-11, Dosho-machi, Chuo-ku, Osaka, 541-0045, JapanTel: +81-6-6226-1501 Fax: +81-6-6226-1507http://www.hien.co.jp/e_index

HIEN’S CABLEThe mar ine cables market requires high-

performance specialty wire and cable for utmost safety, productivity and resistance to harsh environmental conditions.

The development of unique compounds is designed and tested to meet specific needs and

stringent specifications.We can provide the range of shipboard cables

including power, control, instrumentation, data transmission and communication cables.

You can attach high performance characteristics on cables. (Cold resistant, Fire resistant, Oil resistant and more)

JIS TYPE cables◦ for Power & Lighting cable 0.6/1kV FA-TPYCY-70 (Three core, EP rubber insulated, PVC sheathed and steel wire braided cable with PVC protective

covering)

Halogen-free Flame-retardant cables◦ for Control & Instrumental Multi core cable 150/250V FA-MPOCO-7×1.0 (Multi core, EP rubber insulated, Polyolefin sheathed and steel wire braided cable with Polyolefin

protective covering)


Water Lubricated Stern Tube SealingTandem Type EVK Seal

EAGLE INDUSTRY CO.,LTD.2-4-1, SHIBAKOEN, MINATO-KU, TOKYO, 105-0011, JAPANTEL:+81-3-3436-4830 FAX: +81-3-3436-4890 URL: http://www.kemel.com E-MAIL: [email protected]

KEMEL is a global company with its manufacturing facilities located in Japan. With changing markets and environmental guidelines, we have improved ourselves as a world leader in the innovation. Stern tube seal for ships are technically very complex equipment, and are required to be highly reliable.

Features◦ Improved Wear Resistance The active #1 seal ring is always lubricated by

self-controlled clean fresh water. This results in the significant reduction in wear of the mating ring, the seal housing and the seal ring.

◦ Built in Spare Seal Ring The spare #2 seal ring is incorporated in the

seal housing as a spare. This is a standby seal and is idling under normal operation. It is cooled, lubricated & protected by fresh water.

◦ Improved Operability The spare #2 seal ring can be easily activated

by closing the valves . The spare #2 seal ring can be activated without disassembling the seal unit.

◦ Easy Upgrade from Existing EVK Converting an existing EVK seal to a Tandem

type just by replacing the seal casing. (Check with KEMEL for more details)

Specification◦ Shaft Diameter Range φ 101 ～ φ 500 (mm)◦ PV (Pressure-Velocity) Value Max. 0.6 (MPa・m/s) (Water pressure in casing : Max. 0.15 MPa)

Utilizing its expertise and knowhow build up over many years, KEMEL has recently launched a new product called Tandem Type EVK Seal to contribute to the comfort and safety of navigation and to environmental conservation.


NEWPRODUCT

ENVIRONMENTALLY

FRIENDLY

PATENTED


Mitsubishi Heavy Industries Marine Machinery & Equipment Co., Ltd.1-1, Akunoura-Machi, Nagasaki, 850-8610, JapanTel.: +81-95-828-6970E-mail: [email protected] http://www.mhi-mme.com

Low-grade waste heat utilization by ORC generator

Figure 1 ORC generator on board

Mitsubishi Organic Rankine Cycle (ORC) generator converts low grade waste heat of main engine jacket cooling water into electric power. Mitsubishi Heavy Industries Marine Machinery & Equipment Co., Ltd. (MHI-MME) has developed compact and highly efficient ORC generator for marine application in cooperation with Calnetix Technologies, a high-speed generator and magnetic bearing specialist in US. It can make electric power of 125kW (gross) by taking out heat of hot water from main diesel engine of about 10MW or larger.

The first prototype was retrofitted on a large container ship owned by Maersk Line in April 2016 as shown in Figure 1, and has been running

on board, proving high reliability, efficiency and maintenance free operation.

After careful study of the generator skid layout, new arrangement has been designed by MHI-MME (Figure 2), in order to reduce footprint, overall dimension and manufacturing / installation cost.

Integrated Power Module (IPM) the heart of ORC integrates single stage expander turbine and high-speed synchronous alternator. The rotor, consist of a radial expander wheel and rotor with permanent magnet, is supported by friction free magnetic bearings. (Figure 3) This enables no oil supply, low noise and fully closed circuit for working fluid.

Figure 2 New layout of ORC

Figure 3 Construction of IPM


SASAKURA ENGINEERING CO., LTD.7-32, 4-chome, Takejima, Nishiyodogawa-ku, Osaka, 555-0011, JapanTel.: +81-6-6473-2134E-mail : [email protected] http://www.sasakura.co.jp/e/index.html

The number of delivered Sasakura’s Fresh Water Generator for marine use which the latest type is X Series has surpassed 13,000 units since their introduction to the market in 1961.

Since its foundation in 1949, Sasakura Engineering Co., Ltd. has been manufacturing and marketing seawater desalination plants for both marine and land applications, ranging in daily production capacity from hundreds of liters to hundreds of thousands of tons. X Series Fresh Water Generators for marine use constitutes one of its diverse categories of seawater desalination plants. Mainly installed aboard motor ships, they are Tubular Type Fresh Water Generators which utilize the waste heat of diesel engine jacket cooling water. The daily water production capacity ranges from three (3) tons to hundred (100) tons, and the cooling seawater and water ejector-driven seawater feeding system can be selected from two (2) different types (XE and XM types). Having the following notable features, Sasakura’s Fresh Water Generators are well accepted by their users and are in active service over the seven seas:

Features of Fresh Water Generator series X (1)Applying special heat transfer tube “XCOT” “XCOT” achieves higher performance of Fresh Water

Generator compared with previous series K. Also, Fresh Water Generator series X is smaller than previous series K.

(2)Applying Turning Style Heater Turning Style Heater enables easier checking and/or

maintenance of heater tube. (3)Distilled water of high purity A double-structured mist separating mechanism in the

evaporation chamber, consisting of a deflector and a mesh separator, ensures stable supply of distilled water of high purity.

(4)Simple operational procedure Only simple actions are needed at the time of starting

and stopping. Once the generator shifts into steady state operation, neither monitoring nor manipulation is required. In addition to it, Fresh Water Generator series X can apply 95℃ of jacket cooling water temperature.

Sasakura continues to try their best to improve their products which quality is high in order to meet clients’/market’s needs.

Sasakura’s X Series Fresh Water Generators for Marine Use



Smart Sounding Scale Honesty

SEMCO LTD.5-4-23 Takatsuka-Dai, Nishi-Ku, Kobe, 651-2271 JAPANTel.: +81-78-992-8361 Fax: +81-50-3730-4362 E-MAIL: [email protected]

OverviewSmart Sounding Scale Honesty has been developed by

SEMCO LTD., Nippon Yusen Kabushiki kaisha (NYK) and the Monohakobi Technology Institute (MTI) for the purpose of increasing the efficiency of liquid level measurement.

With the sensor installed at the end of measuring tape, the device improves the accuracy and reduce the measuring time of liquid level.

Features◦ Reading of ullage upon landing of the sensor on any liquid.◦ Sensing the actual liquid surface, no the floating bubbles.◦ Requires only a 9-volt battery.◦ Approved by Class NK.

Benefits◦ Saves the measuring time significantly◦ Measures accurately as the sensor does not reflect the “cappuccino bunker” (bubbles on the liquid surface) during bunkering.◦ Can measure not only fuel oil but also colorless liquid such as ballast water and bilge.◦ Portable and easy to handle.

Specifications

Sounding Scale Honesty

Tape length 30m

Battery 9 volts

Tape resolution 2mm (JIS First Class)

Smart Sounding Scale Honesty Standard model. Smart Sounding Scale Honesty With brass cover

Sensor Material : SUSSensor dimensionsΦ 29 × 176mm

Sensor Material : SUS With brass coverSensor dimensions Φ 31.8 × 176mmSensor probe is non-spark type.To restrain sparks.When it hit inside of sounding pipe.

“Please be aware that this product is not explosion-proof, and cannot be used in hazardous area.“This product may not be used in bent pipes.


Wärtsilä introduces its Smart Marine Ecosystem vision

Wärtsilä Japan Ltd. Yaesu MID Bldg. 5F, 1-11-2, Kyobashi, Chuo-ku, Tokyo 104-0031 JapanTel.: +81-3-5159-8700 Fax: +81-3-5159-8710 https://www.wartsila.com

Wärtsilä Marine Solutions enhances the business of its marine and oil & gas industry customers by providing innovative products and integrated solutions that are safe, environmentally sustainable, efficient, flexible, and economically sound. Being a technology leader, and through the experience, know-how and dedication of its personnel, Wärtsilä is able to customise solutions that provide optimal benefits to its customers around the world.

Wärtsilä is leading the industry’s transformation into a new era of efficiency with a Smart Marine Ecosystem comprising high levels of connectivity and digitalisation. The Smart Marine Ecosystem is about efficient use of resources, least climate impact and highest safety. Our purpose is to enable sustainable societies with smart technology. By eliminating the inefficiency ‘waste’ that hampers the industry’s growth and profitability, Wärtsilä aims to create a smarter way of operating and maintaining assets. The company is dedicated to optimising performance, and achieving the safest, most environmentally sustainable and efficient operating profiles for its customers.

Our strong development in product offering combined with know-how and vast installed base gives us a unique platform for that leap. We have the vision, a strong legacy and the expertise of our people. We continue to develop products and services together with customers, for the benefit of our customers. By doing so we will be shaping the industry together.

Our evolution from today takes us from a product and total solutions supplier to leading the industry transformation towards a Smart Marine Ecosystem.


Head Office:Toranomon Toyo Kyodo Building, 13-3, Toranomon 1-chome, Minato-ku, Tokyo 105-0001, JapanTel.: +81-3-3502-2041 Fax: +81-3-3591-2206 E-mail: [email protected] URL: http://www.jsmea.or.jpOverseas Offices:JETRO Hongkong, Ship Machinery DepartmentRoom 4001, 40/F., Hopewell Centre, 183 Queen's Road East, Wan Chai, Hong Kong, ChinaTel.: +852-2501-7291 Fax: +852-2868-1455JETRO Houston, Offshore and Maritime Department (from April)1221 Mckinney, LyondellBasell Tower, Suite 4141, Houston, Texas 77010, U.S.A.Tel.: +1-713-759-9595 Fax: 1-713-759-9210JETRO Singapore, Ship Machinery DivisionHong Leong Building, #38-01 to 05 #37-02A 16 Eaffles Quay, Singapore 048581Tel.: +65-6429-9522 Fax: +65-6224-1169



Printed in Japan in February 2018

Japan Ship Machinery and Equipment Association (JSMEA) set up a new in-house working group (WG) earlier this fiscal year to consider developing fishing vessel markets overseas. It took the step in response to growth in recent years in demand for constructing fishing vessels in newly industrialized economies in Asia and other regions.

To find such markets, it is important to gather and exchange information. The Overseas Fishing Vessel Market Development WG intends to conduct market research and hold study sessions in the future to expand the sales of Japanese machinery and equipment products for fishing vessels not only in the Japanese market, but also in fishing vessel markets in other countries and regions.

WG members attended the International Fishery Congress in October 2017 in Vladivostok, Russia, where fishing industry insiders gathered from all over the country, to market said products. They also plan to take part in Nor-Fishing, an international gathering of fishery industries in Trondheim, Norway, in August 2018. The members hope to partake in a variety of activities, including getting a firsthand look at some of the Nordic nation’s leading-edge fishing vessels.

JSMEA sets up new WG for developing overseas fishing vessel markets

A list of Japan-made machinery and equipment for fishing vessels is also available on JSMEA's website.

http://www.jsmea.or.jp/index_en.html

Hull PartCATEGORY ITEM TYPE COMPANY NAME

AIR CONDITIONING & VENTILATION Mechanical ventilation fans

Axial flow, Centrifugal type Taiyo electric co., ltd.

Axial flow, Centrifugal type, Mild Steel, Stainless Steel, Aluminum, G.R.P.

Kubota Kogyo Co., Ltd.

CARGO SYSTEM Cargo pump

Screw Naniwa Pump Mfg. Co., Ltd.Stripping pump

DECK MACHINERY Hose handling crane

Electro hydraulic Marine Hydrotec co., ltd.Windlass, mooring winch

FIRE FIGHTING SYSTEM Emergency fire pump Centrifugal, Electric motor driven Naniwa Pump Mfg. Co., Ltd.

TEIKOKU MACHINERY WORKS, LTD.

PAINT & CORROSION PROTECTION

Anti-corrosive coatings

Chugoku Marine Paints, Ltd.NIPPON PAINT MARINE SINGAPORE PTE LTD.

Antifouling coatings

Maintenance paints

Tank coatings

Top coat

Heat resistant coating

Other paint

PIPING SYSTEM Ballast pump Centrifugal Naniwa Pump Mfg. Co., Ltd.


RUDDER High lift rudder Kamome Propeller Co., Ltd.

OTHERS

Life jacket immersion suitsLife Jacket : Foam Type,Inflatable Type Immersion Suits : Insulated Type

Takashina Life Preservers Co., Ltd.Protective clothing resistant to chemical attack

For solid Type, For liquid Type, For gas Type

Machinery PartCATEGORY ITEM TYPE COMPANY NAME

AIR COMPRESSOR & FAN

Air compressor Reciprocating type Suction Gas Engine Mfg. Co., Ltd.

Vert. motor driven axial ventilating fan

Axial flow, Centrifugal type, Mild Steel, Stainless Steel, Aluminum, G.R.P.

Kubota Kogyo Co., Ltd.

Axial flow Fan - FA: Normal type, LR: Low noise type Taiyo electric co., ltd.

AUXILIARY ENGINE

Emergency generator engine Vertical, Single Acting, 4-Cycle,Direct Injection,Water Cooled, Turbo-Charged Diesel Engine

Yanmar Co., Ltd.

Main diesel generator engine

Vertical, Single Acting, 4-Cycle,Direct Injection,Water Cooled, Turbo-Charged Diesel Engine

Niigata Power Systems Co., Ltd.

Environmentally friendly, Economical, Energy saving, Low maintenance cost and IMO NOx compliant.



Yanmar Co., Ltd.

Shaft generating system Intermediate, Step up Gear type Taiyo electric co., ltd.

MISCELLANEOUSBilge separator Membrane Type

Sasakura Engineering Co., Ltd.Sewage treatment system Biological Type

PROPELLER & SHAFT

Line shaft bearing

Intermediate Shaft Bearing/Forced Lubrication System KMF/Self Lubrication System KMS

EAGL INDUSTRY CO., LTD. KEMEL COMPANY

Self lubricated line shaft bearing : OPSQ-F Wartsila Japan Ltd.

Stern tube assembly Oil lubricated Stern tube (System or Equipment) Wartsila Japan Ltd.

Stern tube bearing

EVR/Water lubricated Bearing White metal bearing Oil lubricated Bearing

EAGLE INDUSTRY CO., LTD KEMEL COMPANY

White metal lined stern tube bearing : OMS-N Wartsila Japan Ltd.

Stern tube seal assembly

EVK/Water Lubricated Seal CX DX/Double Security Compact Seal Oil Lubricated Seal

EAGLE INDUSTRY CO., LTD KEMEL COMPANY

Oil AFT seal : OLS3-P, OLS4-P. Oil FWD seal : OLS2-P. Air AFT seal : OLS3A-P, OLS4A-P.

Wartsila Japan Ltd.

Transverse thruster

Fixed pitch propeller


MATSUI CORPORATION

NAKASHIMA PROPELLER Co., Ltd.

Controllable pitch propellerKamome Propeller Co., Ltd.


Propeller

Fixed pitch propellerKamome Propeller Co., Ltd.


Controllable pitch propellerKamome Propeller Co., Ltd.


PROPULSION ENGINE

Main diesel engine

4 stroke single-acting, trunk piston type diesel engine with turbochargerand air cooler

AKASAKA DIESELS LIMITED

Optimal geared system, Improved propulsion efficiency, Tough & dependable and Cost-performing.


High efficiency diesel engines. LOW / Medium / High speed main propulsion engines for Fishing Vessels


THE HANSHIN DIESEL WORKS, LTD.


Yanmar Co., Ltd.

Remote control system

Pneumatic typeElectric - Pneumatic typeElectric - Hydraulic type



Remote control system (CPP & main diesel engine)

Electric - Morse Wire type, Morse Wire type, Pneumatic type, Electric Type

Yanmar Co., Ltd.

Electric type Nabtesco Corporation

Reversing gear


Vertically Offset Type, Wet, Multi-Disk, Hydraulic-Operation Type Reduction & Reversing Marine Gear

Yanmar Co., Ltd.

PUMP

Motor driven centrifugal pump Naniwa Pump Mfg. Co., Ltd.


Motor driven gear pump Naniwa Pump Mfg. Co., Ltd.

Motor driven screw pump

TANK MONITORING SYSTEMLevel indicator FLOAT TYPE

SEMCO LTD.Level switch FLOAT TYPE, PRESSURE TYPE

WATER MAKER

Desalination plant

Evaporation Type & RO TypeSasakura Engineering Co., Ltd.Sasakura Service Center Co., Ltd.

Fresh water generator

Water maker

PACKAGE(Integrated Equipment)

CompressorMayekawa MFG.CO., LTD.

Refrigiration

Refrigiration NISSIN REFRIGERATION & ENGINEERING LTD.

Emergency generator & diesel engine Yanmar Co., Ltd.

Emergency generator engine & generator Yanmar Co., Ltd.

Electrical propulsion system & generator,motor, MSB & starter Taiyo electric co., ltd.

Fresh water pump , sea water pump , spare LO pump , spare fuel supply pump & fresh water cooler (shell & tube type)


Yanmar Co., Ltd.

Gearbox, propeller, shafting, stern tube & its relating equipment



Yanmar Co., Ltd.

Lubricating oil cooler , air reservoir , air compressor , emergency air compressor & primary fuel oil strainer


Yanmar Co., Ltd.

Maine diesel generator engine & generator



Yanmar Co., Ltd.

Main diesel engine , remote control system , reversing gear , propeller & stern tube seal assembly



Yanmar Co., Ltd.

Maine generator & diesel engine



Yanmar Co., Ltd.

Propelling machinery, propeller & sealing, heat exchanger Yanmar Co., Ltd.

Propeller,ShaftingAKASAKA DIESELS LIMITED


Secondary fuel oil strainer , fine fuel oil filter , primary lubricating oil strainer & secondary lubricating oil strainer


Yanmar Co., Ltd.

CATEGORY ITEM TYPE COMPANY NAME

PACKAGE(Integrated Equipment) Thermo control valve for fresh water cooler , thermo control valve for lubricating oil cooler


Yanmar Co., Ltd.

OTHER Small bathy thermometer SBT-500SR MURAYAMA DENKI LTD.

Electric PartCATEGORY ITEM TYPE COMPANY NAME

ELECTRIC FISHING GEAR EQUIPMENT

Current Indicator

FURUNO ELECTRIC CO., LTD.

Echo sounder Low and High Frequency

Full circle sonar Low and High Frequency

Searchlight sonar

Sea water temperature Indicator

ELECTRIC NAVIGATION EQUIPMENT

Automatic Identification system (AIS) Class-A AISClass-B AIS


Autopilot Energy Saving Type Autopilot YOKOGAWA Denshikiki Co., Ltd.

Echo sounder FURUNO ELECTRIC CO., LTD.

Global positioning system (GPS) FURUNO ELECTRIC CO., LTD.

Gyro compass YOKOGAWA Denshikiki Co., Ltd.

RadarX-BandS-Band


Speed Log

Electro Magnetic Type YOKOGAWA Denshikiki Co., Ltd.

For ground speedFor water speed


Transmitting heading device

Geomagnetic principles YOKOGAWA Denshikiki Co., Ltd.

Satellite compass FURUNO ELECTRIC CO., LTD.


Voyage data recorder (VDR) FURUNO ELECTRIC CO., LTD.

GENERATOR Emergency generator IP22.23

Taiyo electric co., ltd.Maine generator IP22.23.44

POWER EQUIPMENT

AC motor

Taiyo electric co., ltd.

DC 24V battery charger and discharging panel

BCB-A** Automatic battery charge & discharge board

Motor IP22.23.44

Starter Dead-front

RADIO EQUIPMENT

Facsimile receiver


INMARSAT mobile earth stationInmarsat-CInmarsat-FB Fleet Broadband

MF/HF radio telephone

Radar transponder

Radio equipment (required by GMDSS) Including followings: INMARSAT-C radio telephony equipment

Satellite EPIRB

VHF radio telephone

VHF two way radio telephone

Weather facsimile receiver

SWITCH BOARD

Cargo control console

Taiyo electric co., ltd.

Emergency switchboard TDPE ** Emergency switchboard Dead-front type

Engine control console TMC-** Engine control console

Engine control console (Alarm monitoring system are available for your needs)

TMC-** Engine control console with alarm monitoring system

Individual and group starter panelGT35-**-** Group starter panelL-**,LR-**,C-** Individual starter panel

Inverter speed control system

Main switchboard TDP**-LB Main switch aboard Dead-front type

Power / Lighting distribution boardSC-S-**,SD-S-**,SE-S-**Distribution board

Shore connection box SC-* Shore connection panel

Test panels TSP

W-H group panel and bridge control console

WHP-D** wheel house group panel

Fishing GearCATEGORY ITEM TYPE COMPANY NAME

FISHING NET COATINGS Antifouling coatings Chugoku Marine Paints, Ltd.

FISH PUMP Fish pumpHydraulic Motor Driven 25ton/hr~50ton/hr MATSUI CORPORATION

Various Capacities SANWA COMMERCIAL CO., LTD.

HAULERLine hauler

Hydraulic MATSUI CORPORATION

Motor Driven 20kg~140kg SANWA COMMERCIAL CO., LTD.

Tuna long line hauler Hydraulic SANWA COMMERCIAL CO., LTD.

ROLLER

Ball rollerHydraulic Motor Driven 400kg~1500kg MATSUI CORPORATION


Net roller

Hydraulic Motor Driven 500kg~2000kg MATSUI CORPORATION

Motor Driven 100kg~500 MATSUI CORPORATION


side rollerHydraulic Motor Driven 400kg~1500kg MATSUI CORPORATION


V rollerHydraulic Motor Driven 300kg~5000kg MATSUI CORPORATION


WINCH

Net winchHydraulic Motor Driven 500kg~5000kg MATSUI CORPORATION


Trawl fishing gear Hydraulic Deck Machinery Marine Hydrotec co., ltd.

Trawl winchHydraulic Motor Driven 10KN~500KN MATSUI CORPORATION

Hydraulic Various Capacities SANWA COMMERCIAL CO., LTD.

OTHERS

Auto squid jigging equipment Electric

SANWA COMMERCIAL CO., LTD.

Bait throwerHydraulic

Branch line / Buoy line reel system

Fishing goods (tuna & squid and other fish)

Fishing Lighting system,

Fishing Light, Squid Lighting system etc.,

Fishing Tools

Tuna Hooks, Squid Hooks, Snaps, Nylon Mono-filament, Tetoron rope, Swivels, Lock, etc.,

Tuna / Squid Fishing Goods system arrangement

Tuna long line equipment

HydraulicTuna long line thrower

Tuna puller

Other fishing gear Hydraulic Deck Machinery for Purse Seiner Marine Hydrotec co., ltd.

Products List

Japan Ship Machinery and Equipment AssociationToranomon Toyo Kyodo Building, 13-3, Toranomon 1-chome, Minato-ku,Tokyo, 105-0001, Japan

Tel : +81-3-3502-2041 Fax : +81-3-3591-2206

http://www.jsmea.or.jp Email : [email protected]

Japanese products for Fishing Vessel ListJapanese products for Fishing Vessel List Japan Ship Machinery and Equipment Association


Japa

nese

pro

duct

s fo

r F

ishi

ng V

esse

l Lis

tJa

pan

Ship

Mac

hine

ry a

nd E

quip

men

t A

ssoc

iati

on

Japa

n Sh

ip M

achi

nery

& E

quip

men

t A

ssoc

iati

on

Company Name Contact person Contact Number E-mail URL

1 AKASAKA DIESELS LIMITED. Mr.Takashi Shiratori +81-3-6860-9085 [email protected] http://www.akasaka-diesel.jp/en/

2 Chugoku Marine Paints, Ltd. Sales & Marketing Div., Sales HQ +81-3-3506-3971 http://www.cmp.co.jp/global.html#modal http://www.cmp.co.jp/global.html

3DAIHATSU DIESEL (ASIA PACIFIC) PTE. LTD.

Mr. takashi. hashiguchi +65-6589-9510 [email protected] http://www.dhtd.co.jp/en/index.html

4EAGLE INDUSTRY CO.,LTD KEMEL COMPANY

Mr.Rentaro Kashima +81-3-3436-4830 [email protected] http://www.kemel.com/

5 Furuno Electric Co., Ltd. Mr. Kai Tujita/ Mr. Satoshi Tozaki +81-798-63-1071/1072 [email protected] https://www.furuno.co.jp/en/index.html

6 Kamome Propeller Co., Ltd. Mr. Ryosuke Imai /International Dept. +81-45- 811-2461 [email protected] http://www.kamome-propeller.co.jp/en/

7 Kubota Kogyo Co., Ltd. Mr. Tsuneo Kubota +81-4-7136-8111 [email protected]

8 Marine Hydrotec co.ltd. Overseas Business Department +81-711-1749 [email protected] http://www.mhtc.co.jp/english/

9 MATSUI Corporation Mr. Hiroshi Tabata +81-3-3224-2422 [email protected] http://www.matsui-corp.co.jp/english/

10 MAYEKAWA MFG. CO., LTD. Mr. Hiroshi Kida +81-3-3642-8181 [email protected] http://www.mayekawa.com/

11 MURAYAMA DENKI LTD. Mr. Masaaki Sato +81-3-6417-9800 [email protected] http://www.murayama-denki.co.jp/eng/index.html

12 Nabtesco Corporation. Mr. Kazumasa Shimizu +81-78-967-5361 [email protected] https://www.nabtesco.com/en/

13 NAKASHIMA PROPELLER Co., Ltd. Sales & Marketing Division +81-86-279-5111 [email protected] http://www.nakashima.co.jp/eng/

14 Naniwa Pump Mfg. Co., Ltd. Mr. Toshihiko Hosoki +81-6-6541-6231 [email protected] http://www.naniwa-pump.co.jp/english/

15 Niigata Power Systems Co., Ltd.Mr. K. Takahashi /Senior Manager – Marine TeamInternational Operations Marketing & Sales Center

+81-3-4366-1226 [email protected] https://www.niigata-power.com/english/index.html

16NIPPON PAINT MARINE (SINGAPORE) Pte Ltd.

Mr. Alvin Lee +65-6268-1161 [email protected] http://nipponpaint-marine.com/

17NISSIN REFRIGERATION & ENGINEERING LTD.

Mr.Kenji Onaka +81-3-5710-7061 [email protected] http://www.nissin-ref.co.jp/english/

18 SANWA COMMERCIAL CO., LTD. Mr. Soichi Isaka / Mr. Hidetoshi Ishikawa +81-54-353-6121 [email protected] http://www.scc-sanwa.jp/en/index.html

19Sasakura Engineering Co., Ltd.Sasakura Service Center Co., Ltd.

Ms. N. Nishimura, Manager of Machinery Marketing Sect.Machinery Division

+81-6-6473-2134 [email protected] http://www.sasakura.co.jp/e/ir/index.html

20 SEMCO LTD. Ms.Tomomi Shinomiya +81-78-992-8361 [email protected] http://www.semco-ltd.com/en/

21 Suction Gas Engine Mfg. Co., Ltd. Mr. T. Hokibara/Engineering & Sales Department +81-3-3646-5131 [email protected] http://www.suction.co.jp/index.html

22 Taiyo Electric Co., Ltd.Mr. Shinichiro .ItoMr.Yuki Morimoto

[email protected]@taiyo-electric.co.jp

http://www.taiyo-electric.co.jp/english/index.html

23 Takashina Life Preservers Co.,Ltd. Mr. Masao Sano +81-6-6567-1141 [email protected] http://www.tlpc.co.jp/

24 TEIKOKU MACHINERY WORKS,LTD.Mr. Shinichiro MiyawakiMr. Junji Iwata

[email protected]@teikokupump.co.jp

http://english.teikokupump.co.jp/

25 THE HANSHIN DIESEL WORKS, LTD. Mr. Shinya Tabata / Overseas business section +81-78-335-6001 [email protected]. http://www.hanshin-dw.co.jp/english/product.html

26 Wartsila Japan Ltd.Mr. Yasushi Komagata Manager, Sales Support, Seals and Bearings Japan

+81-3-5159-8728 [email protected] http://www.wartsila.com/jpn

27 Yanmar Co., Ltd. Mrs. Kana Yasaka +81-6-6489 8069 [email protected] https://www.yanmar.com/global/

28 YOKOGAWA Denshikiki Co., Ltd. Mr. Keisuke Kishino +81-3-3225-5383 [email protected] http://www.yokogawa.com/ydk/

Makers List

Japan Ship Machinery and Equipment AssociationToranomon Toyo Kyodo Building, 13-3, Toranomon 1-chome, Minato-ku,Tokyo, 105-0001, Japan

Tel : +81-3-3502-2041 Fax : +81-3-3591-2206 http://www.jsmea.or.jp Email : [email protected]



Japanese products for Fishing Vessel ListJapanese products for Fishing Vessel List

Japanese fishing vessel products

spring 2018/no.115 jsmea · ships and marine technology seminar friday 13 april 10：30 10：50the...

Documents