spring fever room divider

1
7/30/2019 Spring Fever Room Divider http://slidepdf.com/reader/full/spring-fever-room-divider 1/1 Materials Needed: V.I.P Spring Collage Fabric #V0800-LJ Instructions: 1. Measure the width of the opening in the screen and multiply by 2, then add 3". This is the width you need for each panel. 2. Measure the length of the opening in the screen. 3. Measure the width of the top and bottom rod. Add this measurement plus 2" to the length measurement. 4. To figure yardage of fabric needed multiply the total length of one panel by 3 and divide this by 36". 5. Press sides in 1-1/2", the press 1/2" on the raw edge. Stitch close to inner pressed edge. 6. Press top under the measurement of the rod plus 3/4". (Example: 1/2"Rod + 3/4" = 1-1/4" Pressed under) Then press the raw edge under 1/2". Stitch closed to inner pressed edge. Repeat with low er edge. 7. Repeat steps 5 and 6 with the other two panels. Press the panels and hang in the screen. While all possible care has been taken to ensure the accuracy of this pattern, we are not responsible for printing errors or the way in w hich individual work varies. WRONG SIDE RIGHT SIDE WRONG SIDE “Spring Fever Screen Curtain” 

Upload: bdoor15

Post on 04-Apr-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Spring Fever Room Divider

7/30/2019 Spring Fever Room Divider

http://slidepdf.com/reader/full/spring-fever-room-divider 1/1

Ma terials Needed: 

V.I.P Sp rin g Co llage Fabric # V0 80 0-LJ

Instructions: 

1. Measure the width of the o pening in the screen and mu lt ip ly by 2, then add 3". This is the w idth you need for each panel.

2. Measure the length of the opening in the screen.

3. Measure the width of the top an d bottom rod. Add this measurement plus 2" to the length measurement.

4. To f igure yardage of fabr ic needed mu lt ip ly the total length of on e panel by 3 and divide this by 3 6".

5. Press sides in 1-1/2 ", the press 1/ 2" o n th e raw edge. Stitch close to in ner pressed edge.

6. Press top under the measurement of the rod plus 3/4". (Example: 1/2"Rod + 3/4" = 1-1/4" Pressed under)

Then press the raw ed ge und er 1/2 ". Stitch closed to inn er pressed edge. Repeat w ith low er edge.

7. Repeat steps 5 and 6 with the o ther tw o pa nels. Press the pan els and han g in th e screen.

While all possible care has been taken to ensure the accuracy of this pattern, we are not responsible for printing errors or the w ay in w hich individual work varies.

WRONG

SIDE

RIGHT SIDE

WRONG

SIDE

“Spring Fever Screen Cur ta in”