standard details advanced information boards type 1a, 1b, 1c and 1d type 2a, 2b, 2c … · 2020. 5....
TRANSCRIPT
-
100.0 x HT
50.0 x HT MIN
TSRGD SCH13, PT2. ITEM 9
(DIAG 7001) 600 [24.00 s/w]
60 [2.5 s/w]
150 [6 s/w]
250 [10.00 s/w]
2235 [89.48 s/w]2445 [97.84 s/w]
60 [2.5 s/w]
10 [0.5 s/w]
375 [15.00 s/w]
40 [1.5 s/w]
1460 [58.32 s/w] 1660 [66.46 s/w]
100.0 x HT
75.0 x HT MIN
10 [0.5 s/w]
1355 [54.13 s/w]
250 [10.00 s/w]
60 [2.5 s/w]
375 [15.00 s/w]
60 [2.5 s/w]
40 [1.5 s/w]
35 [1.5 s/w]
R35
R20
TYPE 1A - FOR HIGHWAYS WITH WIDTH CONSTRAINTS
TO TSRGD SCHEDULE 13, PART 6 ITEM 42 (DIAGRAM 7003.1)
TYPE 1B - FOR HIGHWAYS WITH WIDTH CONSTRAINTS
TO TSRGD SCHEDULE 13, PART 6 ITEM 42 (DIAGRAM 7003.1)
TYPE 2A - FOR HIGHWAYS
TO TSRGD SCHEDULE 13, PART 6 ITEM 42 (DIAGRAM 7003.1)
TYPE 2B - FOR HIGHWAYS
TO TSRGD SCHEDULE 13, PART 6 ITEM 42 (DIAGRAM 7003.1)
TYPE 2C - FOR NIGHT WORKS ON HIGHWAYS
TO TSRGD SCHEDULE 13, PART 9
TYPE 2D - FOR NIGHT WORKS ON HIGHWAYS
TO TSRGD SCHEDULE 13, PART 9
MAIN CONTRACTOR LOGO MAIN CONTRACTOR LOGO
MAIN CONTRACTOR LOGOMAIN CONTRACTOR LOGO
60 [2.5 s/w]
2445 [97.84 s/w]2445 [97.84 s/w]
1365 [54.50 s/w]
60 [2.5 s/w]
60 [2.5 s/w]
R35
R20
TYPE 1C&D - NIGHT WORK FOR HIGHWAYS WITH
WIDTH CONSTRAINTS
TO TSRGD SCHEDULE 13, PART 9
100.0 x HT
50.0 x HT MIN TO
REPLACE 'WORK
STARTS HERE'
ON TYPE 1A OR
1B SIGNS
REV
AMENDMENTS
DATE CAD CHKD APPD
NOTES
1. DO NOT SCALE FROM THIS DRAWING
2. ALL DIMENSIONS IN MILLIMETRES AT 100 x HEIGHT.
DIMENSIONS SHOWN WITH s/w IN BRACKETS INDICATE
THAT A REDUCED x HEIGHT CAN BE APPLIED TO SIGNS.
REFER TO TABLE FOR SIGN SIZES AT PERMITTED
REDUCED x HEIGHTS
3. ALL SIGNS ARE TO BE IN ACCORDANCE WITH TRAFFIC
SIGNS REGULATIONS AND GENERAL DIRECTIONS 2016
(TSRGD) IN TYPE RA1 MATERIAL TO BS EN 12899-1
UNLESS OTHERWISE STATED.
4. COLOURS OF HAMPSHIRE COUNTY COUNCIL LOGO:
ROSE OUTER PETALS BLACK
ROSE CENTRE PETALS TRANSPARENT
TEXT, LINES AND CENTRE DOT BLACK
5. THE LOGO SHOULD NOT BE RECREATED, ONLY USE
APPROVED VERSION SUPPLIED. DETAILS OF LOGO CAN
BE REQUESTED FROM [email protected]
6. ALL TEXT TO BE IN ACCORDANCE WITH TSRGD
SCHEDULE 17, PART 1 0R PART 2 EXCEPT LOGOS
7. COLOUR OF SIGNS SHALL BE BLACK TEXT ON YELLOW
BACKGROUND WITH BLACK BORDER UNLESS
OTHERWISE STATED
8. WHERE THE AREA OF A SIGN IS ABOVE 0.75m
2
THEN IT
SHALL BE EITHER MOUNTED ON A GROUND FRAME OR
ON TEMPORARY POSTS
9. TEMPORARY POST AND FOUNDATION DETAILS ARE
SPECIFIED IN THE WORKS INFORMATION
10. WHERE THE AREA OF A SIGN IS BELOW 0.75m
2
THEN IT
MAY BE INSTALLED ON A STREET LIGHTING COLUMN
USING A 3mm THICK ABR210 NEOPRENE SLEEVE UNDER
ALL CONNECTIONS, SSE CONTRACTING SHALL BE
NOTIFIED A MINIMUM OF 10 DAYS, MAXIMUM OF 30 DAYS
IN ADVANCE, OF PRECISE LOCATION OF SIGN BY EMAIL
TO: [email protected]. SIGN TO BE
REMOVED AFTER WORKS AND ANY DAMAGE TO LAMP
COLUMN TO BE MADE GOOD. ALL TO BE IN
ACCORDANCE TO APPENDIX 12/1 AND APPENDIX 1/17
11. CONTRACTOR LOGO SHALL BE NO HIGHER THAN
HAMPSHIRE COUNTY COUNCIL LOGO (10 s/w).
12. LOGO TILE OUTLINE SHOWN FOR POSITIONING CLARITY
ONLY
STUART JARVIS BSc DipTP FCIHT MRTPI: DIRECTOR OF ECONOMY, TRANSPORT & ENVIRONMENT
HCC CAD FILE: K:\Eng\Standard\AutoCAD\Standard Details (Secure) As Updated Dec 2011\HCC11 2020 STANDARD DETAILS\C Series\C-170 and 175.dwg
DRAWING TITLE
DRAWING NUMBER REV
SCALE @ A3
DATE
SCHEME
APPROVED
CHECKED
CONSULTANT
DESIGNER
CAD
STANDARD DETAILS
ADVANCED INFORMATION
BOARDS
TYPE 1A, 1B, 1C AND 1D
TYPE 2A, 2B, 2C AND 2D
HCC11/C/170
CLT
CLT
JPR
CDP
N.T.S
March 2020
SIGN TYPE x HEIGHT (mm) HEIGHT (mm) WIDTH (mm) AREA (m
2
)
TYPE 2A
75 1015 1680 1.71
TYPE 2B,TYPE 2C
AND TYPE 2D
75 1015 1835 1.86
SIGN TYPE
x HEIGHT
(mm)
HEIGHT
(mm)
WIDTH
(mm)
AREA
(m
2
)
TYPE 1A
AND TYPE
1C
75 1025 1095 1.12
62.5 850 910 0.77
50 680 730 0.50
TYPE 1B
AND TYPE
1D
75 1025 1250 1.28
62.5 850 1040 0.88
50 680 830 0.56
Copyright Hampshire County Council. 2019
All rights, including translation, reserved. No part of this publication may be
reproduced, stored in a retrieval system, or transmitted in any form or by any
means (electronic, mechanical, photocopied, recorded or otherwise) without
the prior written permission of Hampshire County Council. Requests should
be directed to the Economy, Transport & Environment Department.
Sheets and Views170 - AIB TYPE 1 AND 2