standard features genesis - abestkitchen€¦ · genesis g enesis hood-type standard features •...
TRANSCRIPT
(1M) 11/11 Printed in U.S.A.
DH5000 High Temperature Hood-type Dishwashing Machine
genesis
gen
esis Ho
od
-type
standard Features• EnErgyStar®Qualified• NewExclusiveBuilt-in booster configured
for both 40° and 70° Rise
• NewExclusiveField convertible from three to single phase or from straight to corner operation
• Rinse Sentry – ensures 180°F final rinse
• Auto start – starts unit when hood is closed
• Single point electrical connection
• High efficiency 1 HP pump
• Up to 53 racks per hour
• Self draining pump
• Automatic tank fill
• Detergent/chemical connections
• Interchangeable upper and lower spray arm
• Automatic drain valve – drains wash tank when power is off
• Vent fan control
• Bottom mounted digital controls
• PRV (Pressure Regulating Valve)
• Sloped hood keeps hot vapors away from operator
• Standard and Heavy Duty wash cycles
speciFier statementSpecified unit will be Champion model Genesis, DH5000 high temperature hood-type dishwashing machine.Features sloped hood, electronic controls, Rinse Sentry, Auto start, interchangeable stainless steel wash and rinse arms, up to 53 racks/hr., .83 US gals/rack. 1 year parts and labor warranty.
Champion Industries, Inc. 3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979 www.championindustries.com
ProjectItem No.Quantity
options & accessories : Drain Water Tempering Kit
: Direct Vent Option
: Ventless/Heat Recovery/ Condensate Removal option
: Hot water coil with gas booster
: Racks
: Peg
: Flat
Direct Vent
Ventless Heat Recovery
Condensate Removal
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.Champion Industries, Inc., 3765 Champion Blvd., NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
12
3 3
2
3
1
1
2
6"[152]
18-1/8"
[459]
33-3/4"[857]
37-7/8"[963]
17"[431]
60-1/8"[1526]
HOODUP
77-1/4"[1963]
CLEARANCE69-3/4"[1770]
1-7/8"[48]
5-1/8"[129]
MIN
MIN
19-5/8"[500]
26-1/8"[663]
INSI
DE
TRAC
KS
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
5"
3"
8-3/4"[221]
4-3/8"[112]
8-7/8"[225]
8"[203]
8"[203]
17"[432]
4-3/4"[121]
INSIDE TRACKS
2-5/8"[67]
20-1/8"[511]
20-1/8"[511]
31"[787]
29-1/2"[749]
34-1/8"[867]
30"[762]
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
12
3 3
2
3
1
1
2
6"[152]
18-1/8"
[459]
33-3/4"[857]
37-7/8"[963]
17"[431]
60-1/8"[1526]
HOODUP
77-1/4"[1963]
CLEARANCE69-3/4"[1770]
1-7/8"[48]
5-1/8"[129]
MIN
MIN
19-5/8"[500]
26-1/8"[663]
INSI
DE
TRAC
KS
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
5"
3"
8-3/4"[221]
4-3/8"[112]
8-7/8"[225]
8"[203]
8"[203]
17"[432]
4-3/4"[121]
INSIDE TRACKS
2-5/8"[67]
20-1/8"[511]
20-1/8"[511]
31"[787]
29-1/2"[749]
34-1/8"[867]
30"[762]
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
DH5000 High TemperatureHood-type Dishwashing Machine
genesisg
enes
is H
oo
d-t
ype
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.ChampionIndustries,Inc.,3765ChampionBlvd.,NC27105•336/661-1556•Fax:336/661-1979•www.championindustries.com
Shipping weight crated: 300 lbs. Dimensions shown in inches and [mm]
typical table construction
speciFicationsCapacities Racks per hr. (NSF rated) 53 Wash tank (gal.) 9.5
Motorhorsepower 1 HPWaterconsumption Gal. per hr. (max. use) 44 Gal. per rack 0.83
temperature°F Wash 150 Rinse 180
Heating Tank heat, electric 5.2 kW Electric Booster 7.5-10 kW
timecycleinseconds Standard Extended
Wash 35 65 Rinse 10 10 Sanitary Dwell 15 15 Total cycle 60 90
Warning: Plumbing, electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary and safety codes and the National Electrical Code.
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
utilities1 Electrical
Machine Connection (See Electrical Box)
2 HotWater1/2" NPT Hot Water 110° - 140°F 20-22 PSI Flow pressure
3 Drain2" OD Connection 15 GPM max flow
ElectricHeat,40°/70°riseBooster
Voltage ratedampsMinimumSupplyCircuitampacity
MaximumOvercurrent
ProtectiveDevice208-240/60/1 67-76 80 80208-240/60/3 41-47 50 50460-480/60/3 21-22 25 25
ElectricHeat,noBooster
Voltage ratedampsMinimumSupplyCircuitampacity
MaximumOvercurrent
ProtectiveDevice208-240/60/1 31-35 45 45208-240/60/3 20-22 30 30460-480/60/3 10 15 15
side View
Front View
corner configurationplan View
12
3 3
2
3
1
1
2
6"[152]
18-1/8"
[459]
33-3/4"[857]
37-7/8"[963]
17"[431]
60-1/8"[1526]
HOODUP
77-1/4"[1963]
CLEARANCE69-3/4"[1770]
1-7/8"[48]
5-1/8"[129]
MIN
MIN
19-5/8"[500]
26-1/8"[663]
INSI
DE
TRAC
KS
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
5"
3"
8-3/4"[221]
4-3/8"[112]
8-7/8"[225]
8"[203]
8"[203]
17"[432]
4-3/4"[121]
INSIDE TRACKS
2-5/8"[67]
20-1/8"[511]
20-1/8"[511]
31"[787]
29-1/2"[749]
34-1/8"[867]
30"[762]
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
12
3 3
2
3
1
1
2
6"[152]
18-1/8"
[459]
33-3/4"[857]
37-7/8"[963]
17"[431]
60-1/8"[1526]
HOODUP
77-1/4"[1963]
CLEARANCE69-3/4"[1770]
1-7/8"[48]
5-1/8"[129]
MIN
MIN
19-5/8"[500]
26-1/8"[663]
INSI
DE
TRAC
KS
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
5"
3"
8-3/4"[221]
4-3/8"[112]
8-7/8"[225]
8"[203]
8"[203]
17"[432]
4-3/4"[121]
INSIDE TRACKS
2-5/8"[67]
20-1/8"[511]
20-1/8"[511]
31"[787]
29-1/2"[749]
34-1/8"[867]
30"[762]
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
12
3 3
2
3
1
1
2
6"[152]
18-1/8"
[459]
33-3/4"[857]
37-7/8"[963]
17"[431]
60-1/8"[1526]
HOODUP
77-1/4"[1963]
CLEARANCE69-3/4"[1770]
1-7/8"[48]
5-1/8"[129]
MIN
MIN
19-5/8"[500]
26-1/8"[663]
INSI
DE
TRAC
KS
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
5"
3"
8-3/4"[221]
4-3/8"[112]
8-7/8"[225]
8"[203]
8"[203]
17"[432]
4-3/4"[121]
INSIDE TRACKS
2-5/8"[67]
20-1/8"[511]
20-1/8"[511]
31"[787]
29-1/2"[749]
34-1/8"[867]
30"[762]
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.Champion Industries, Inc., 3765 Champion Blvd., NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
12
3 3
2
3
1
1
2
6"[152]
18-1/8"
[459]
33-3/4"[857]
37-7/8"[963]
17"[431]
60-1/8"[1526]
HOODUP
77-1/4"[1963]
CLEARANCE69-3/4"[1770]
1-7/8"[48]
5-1/8"[129]
MIN
MIN
19-5/8"[500]
26-1/8"[663]
INSI
DE
TRAC
KS
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
5"
3"
8-3/4"[221]
4-3/8"[112]
8-7/8"[225]
8"[203]
8"[203]
17"[432]
4-3/4"[121]
INSIDE TRACKS
2-5/8"[67]
20-1/8"[511]
20-1/8"[511]
31"[787]
29-1/2"[749]
34-1/8"[867]
30"[762]
1-1/2" [32] Roll
1-1/8"[29]
7-1/4" [184]
21-3/8"[543]
plan View
DH5000 High TemperatureHood-type Dishwashing Machine
genesisg
enesis H
oo
d-ty
pe
Shipping weight crated: 350 lbs. Dimensions shown in inches and [mm]
speciFicationsCapacities Racks per hr. 46 Wash tank (gal.) 9.5
Motorhorsepower 1 HPWaterconsumption Gal. per hr. (max. use) 39 Gal. per rack 0.83
temperature°F Wash 150 Rinse 180
Heating Tank heat, electric 5.2 kW Electric Booster 7.5-10 kW
timecycleinseconds Standard Extended
Wash 35 65 Rinse 10 10 Sanitary Dwell 15 15
Vent Fan 10 10 Total cycle 70 100
Warning: Plumbing, electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary and safety codes and the National Electrical Code.
utilities1 Electrical
Machine Connection (See Electrical Box)
2 HotWater1/2" NPT Hot Water 110° - 140°F 20-22 PSI Flow pressure
3 Drain2" OD Connection 15 GPM max flow
5 Exhaust250 CFM Fan 4" Round Duct
Electric40°/70°riseBooster
Voltageratedamps
Min.SupplyCkt.Conductorampacity
Min.OvercurrentProtectiveDevice
208-240/60/1 67-76 80 80208-240/60/3 41-47 50 50460-480/60/3 21-22 25 25
direct Vent optionAllows unit to vent directly to the outside.No vent hood required.
For standard machine dimensions see DH5000 drawing
Front View
side View
55
5
42
4
2
1
2
1
3
13
1
33
1
2
3
3
42
DH
5000 CON
DEN
SATE REMO
VAL
78-3/8"[1990]
81-3/8"[2066]
13"[329]
12-1/2"[318]
6-1/8"[156]
8-3/4" [221]
18-1/8"[459]
37-7/8"[963] 33-3/4"
[857]
69-3/4"[1770]
4-3/8"[112]
8-7/8"[225]
26-1/8"[663]
19-5/8"[500]
CLEARANCE
17"[431]
MIN
5-1/8"[129]
MIN
1-7/8"[48]
29-1/2"[750]
17"[431]
CLEARANCE69-3/4"[1770]
37-7/8"[963] 33-3/4"
[857]
8-3/4"[221]
19-5/8"[500]
26-1/8"[663]
8-7/8"[225]
5-1/8"[129] MIN1-7/8"
[48] MIN
2-3/8"[60]
INSI
DE
TRAC
KS
6"[152]
4-3/4"[122]
4-3/4"[122]
8-3/4" [223]
6"[152]
10-1/8"[257]
9-1/4"[233]
11"[280]
44-1/8"[1119]
9-1/4"[233]
11"[280]
44-1/8"[1119]
20-1/8"[511]
8"[203]
5-1/4"[135]
17"[432]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
34-1/8"[866]
17"[432] 29-1/2"
[750]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
INSI
DE
TRAC
KS
20-1/8"[511]
8"[203]
2-1/2"[64]
5-1/4"[135]
31"[787]
31"[787]
34-1/8"[867]
DH
5000
DIR
ECT
VEN
T
55
5
42
4
2
1
2
1
3
13
1
33
1
2
3
3
42
DH
5000 CON
DEN
SATE REMO
VAL
78-3/8"[1990]
81-3/8"[2066]
13"[329]
12-1/2"[318]
6-1/8"[156]
8-3/4" [221]
18-1/8"[459]
37-7/8"[963] 33-3/4"
[857]
69-3/4"[1770]
4-3/8"[112]
8-7/8"[225]
26-1/8"[663]
19-5/8"[500]
CLEARANCE
17"[431]
MIN
5-1/8"[129]
MIN
1-7/8"[48]
29-1/2"[750]
17"[431]
CLEARANCE69-3/4"[1770]
37-7/8"[963] 33-3/4"
[857]
8-3/4"[221]
19-5/8"[500]
26-1/8"[663]
8-7/8"[225]
5-1/8"[129] MIN1-7/8"
[48] MIN
2-3/8"[60]
INSI
DE
TRAC
KS
6"[152]
4-3/4"[122]
4-3/4"[122]
8-3/4" [223]
6"[152]
10-1/8"[257]
9-1/4"[233]
11"[280]
44-1/8"[1119]
9-1/4"[233]
11"[280]
44-1/8"[1119]
20-1/8"[511]
8"[203]
5-1/4"[135]
17"[432]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
34-1/8"[866]
17"[432] 29-1/2"
[750]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
INSI
DE
TRAC
KS
20-1/8"[511]
8"[203]
2-1/2"[64]
5-1/4"[135]
31"[787]
31"[787]
34-1/8"[867]
DH
5000
DIR
ECT
VEN
T
55
5
42
4
2
1
2
1
3
13
1
33
1
2
3
3
42
DH
5000 CON
DEN
SATE REMO
VAL
78-3/8"[1990]
81-3/8"[2066]
13"[329]
12-1/2"[318]
6-1/8"[156]
8-3/4" [221]
18-1/8"[459]
37-7/8"[963] 33-3/4"
[857]
69-3/4"[1770]
4-3/8"[112]
8-7/8"[225]
26-1/8"[663]
19-5/8"[500]
CLEARANCE
17"[431]
MIN
5-1/8"[129]
MIN
1-7/8"[48]
29-1/2"[750]
17"[431]
CLEARANCE69-3/4"[1770]
37-7/8"[963] 33-3/4"
[857]
8-3/4"[221]
19-5/8"[500]
26-1/8"[663]
8-7/8"[225]
5-1/8"[129] MIN1-7/8"
[48] MIN
2-3/8"[60]
INSI
DE
TRAC
KS
6"[152]
4-3/4"[122]
4-3/4"[122]
8-3/4" [223]
6"[152]
10-1/8"[257]
9-1/4"[233]
11"[280]
44-1/8"[1119]
9-1/4"[233]
11"[280]
44-1/8"[1119]
20-1/8"[511]
8"[203]
5-1/4"[135]
17"[432]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
34-1/8"[866]
17"[432] 29-1/2"
[750]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
INSI
DE
TRAC
KS
20-1/8"[511]
8"[203]
2-1/2"[64]
5-1/4"[135]
31"[787]
31"[787]
34-1/8"[867]
DH
5000
DIR
ECT
VEN
T
DH5000 High Temperature Hood-type Dishwashing Machine
genesisg
enes
is H
oo
d-t
ype
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.ChampionIndustries,Inc.,3765ChampionBlvd.,NC27105•336/661-1556•Fax:336/661-1979•www.championindustries.com
Shipping weight crated: 350 lbs. Dimensions shown in inches and [mm]
Warning:Plumbing, electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary and safety codes and the National Electrical Code.
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.
Electric70°riseBooster
Voltageratedamps
MinimumSupplyCkt.Conductorampacity
MaximumOvercurrentProtectiveDevice
208/60/1 79 100 100240/60/1 90 100 100208/60/3 48 60 60240/60/3 54 60 60480/60/3 22 25 25
speciFicationsCapacities Racks per hr. 37 Wash tank (gal.) 9.5
Motorhorsepower 1 HPWaterconsumption Gal. per hr. (max. use) 30 Gal. per rack 0.83
temperature°F Wash 150 Rinse 180
Heating Tank heat, electric 5.2 kW Electric Booster 10 kW
timecycleinseconds Standard Extended
Wash 35 65 Rinse 10 10 Sanitary Dwell 15 15
Vent Fan 30 30 Total cycle 90 120
utilities1 Electrical
Machine Connection (See Electrical Box)
2 HotWater1/2" NPT Hot Water 110° - 140°F 20-22 PSI Flow pressure
3 Drain2" OD Connection 15 GPM max flow
4 ColdWater1/2" NPT Cold Water 70°F40-45 PSI Flow pressure (machine operates at 20)
Ventless/Heat recoVery/condensate remoVal optionRemoves heat and water vapor at the end of the cycle while recovering the normally exhausted heat and transferring it to the booster. No vent hood required.
For standard machine dimensions see DH5000 drawing
55
5
42
4
2
1
2
1
3
13
1
33
1
2
3
3
42
DH
5000 CON
DEN
SATE REMO
VAL
78-3/8"[1990]
81-3/8"[2066]
13"[329]
12-1/2"[318]
6-1/8"[156]
8-3/4" [221]
18-1/8"[459]
37-7/8"[963] 33-3/4"
[857]
69-3/4"[1770]
4-3/8"[112]
8-7/8"[225]
26-1/8"[663]
19-5/8"[500]
CLEARANCE
17"[431]
MIN
5-1/8"[129]
MIN
1-7/8"[48]
29-1/2"[750]
17"[431]
CLEARANCE69-3/4"[1770]
37-7/8"[963] 33-3/4"
[857]
8-3/4"[221]
19-5/8"[500]
26-1/8"[663]
8-7/8"[225]
5-1/8"[129] MIN1-7/8"
[48] MIN
2-3/8"[60]
INSI
DE
TRAC
KS
6"[152]
4-3/4"[122]
4-3/4"[122]
8-3/4" [223]
6"[152]
10-1/8"[257]
9-1/4"[233]
11"[280]
44-1/8"[1119]
9-1/4"[233]
11"[280]
44-1/8"[1119]
20-1/8"[511]
8"[203]
5-1/4"[135]
17"[432]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
34-1/8"[866]
17"[432] 29-1/2"
[750]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
INSI
DE
TRAC
KS
20-1/8"[511]
8"[203]
2-1/2"[64]
5-1/4"[135]
31"[787]
31"[787]
34-1/8"[867]
DH
5000
DIR
ECT
VEN
T
55
5
42
4
2
1
2
1
3
13
1
33
1
2
3
3
42
DH
5000 CON
DEN
SATE REMO
VAL
78-3/8"[1990]
81-3/8"[2066]
13"[329]
12-1/2"[318]
6-1/8"[156]
8-3/4" [221]
18-1/8"[459]
37-7/8"[963] 33-3/4"
[857]
69-3/4"[1770]
4-3/8"[112]
8-7/8"[225]
26-1/8"[663]
19-5/8"[500]
CLEARANCE
17"[431]
MIN
5-1/8"[129]
MIN
1-7/8"[48]
29-1/2"[750]
17"[431]
CLEARANCE69-3/4"[1770]
37-7/8"[963] 33-3/4"
[857]
8-3/4"[221]
19-5/8"[500]
26-1/8"[663]
8-7/8"[225]
5-1/8"[129] MIN1-7/8"
[48] MIN
2-3/8"[60]
INSI
DE
TRAC
KS
6"[152]
4-3/4"[122]
4-3/4"[122]
8-3/4" [223]
6"[152]
10-1/8"[257]
9-1/4"[233]
11"[280]
44-1/8"[1119]
9-1/4"[233]
11"[280]
44-1/8"[1119]
20-1/8"[511]
8"[203]
5-1/4"[135]
17"[432]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
34-1/8"[866]
17"[432] 29-1/2"
[750]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
INSI
DE
TRAC
KS
20-1/8"[511]
8"[203]
2-1/2"[64]
5-1/4"[135]
31"[787]
31"[787]
34-1/8"[867]
DH
5000
DIR
ECT
VEN
T
55
5
42
4
2
1
2
1
3
13
1
33
1
2
3
3
42
DH
5000 CON
DEN
SATE REMO
VAL
78-3/8"[1990]
81-3/8"[2066]
13"[329]
12-1/2"[318]
6-1/8"[156]
8-3/4" [221]
18-1/8"[459]
37-7/8"[963] 33-3/4"
[857]
69-3/4"[1770]
4-3/8"[112]
8-7/8"[225]
26-1/8"[663]
19-5/8"[500]
CLEARANCE
17"[431]
MIN
5-1/8"[129]
MIN
1-7/8"[48]
29-1/2"[750]
17"[431]
CLEARANCE69-3/4"[1770]
37-7/8"[963] 33-3/4"
[857]
8-3/4"[221]
19-5/8"[500]
26-1/8"[663]
8-7/8"[225]
5-1/8"[129] MIN1-7/8"
[48] MIN
2-3/8"[60]
INSI
DE
TRAC
KS
6"[152]
4-3/4"[122]
4-3/4"[122]
8-3/4" [223]
6"[152]
10-1/8"[257]
9-1/4"[233]
11"[280]
44-1/8"[1119]
9-1/4"[233]
11"[280]
44-1/8"[1119]
20-1/8"[511]
8"[203]
5-1/4"[135]
17"[432]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
34-1/8"[866]
17"[432] 29-1/2"
[750]
20-1/8"[511]
2-5/8"[67]
INSIDE TRACKS
INSI
DE
TRAC
KS
20-1/8"[511]
8"[203]
2-1/2"[64]
5-1/4"[135]
31"[787]
31"[787]
34-1/8"[867]
DH
5000
DIR
ECT
VEN
T
Front View
side View
plan View