step by step configuration
TRANSCRIPT
-
7/27/2019 Step by Step Configuration
1/25
Installing Windows XP
Step By Step Configuration:Windows XP, possibly Microsoft's best OS so far is aimed both at the corporate and homemarket, with subtle differences between the two flavours "XP Pro" & "XP Home".Designed to have a more intuitive interface than previous releases of Windows, XP istargeted more at the casual than power user IMO. While the functionality of previousversions is retained, and in many ways, improved, the front end is designed more for ease
of use than "tweakability".This simplicity extends as far as the installer, with a lot of the system configuration eitherfully automated, or wizard driven.In this tutorial, we will take a freshly built system and install XP Professional from scratch
on a single blank 10 GB hard disk.
1. Getting your hardware 'up to date'.Like Windows 2000, XP makes extensive use of the Microsoft ACPI (Advanced Configuration
& Power Interface), which relies heavily on your system BIOS (Basic Input / Output
System). Many slightly older systems may not be set up to take advantage of ACPIfunctionality, so it's worth checking with your motherboard and/or peripheral vendor to seeif an ACPI compliant BIOS upgrade exists for your hardware.Additionally, XP has a fairly comprehensive hardware database, so there's a fairly good
chance that a majority of your hardware will be directly supported. To this end, Microsofthas provided a hardware compatibility search tool, which can be accessedhere.As with the installation of any new OS, it's always a good idea to know what hardware youhave inside your box, and to acquire the appropriate drivers for anything non-standard,such as video cards, sound cards, internal modems & network cards. Hardware wise, XP is
designed to prevent you from installing unsuitable drivers, so it's important to make surethat anything you are going to download is XP compatible.2. Starting the install in text mode.
Starting an XP install is relatively simple. The CD-Rom containing the installation files is selfbooting, and provided you have set your boot priority in the BIOS to attempt boot from CD-
Rom first, you should be up and running within a few seconds! If your hard disk contains a
previous OS, such as Windows 98, you will be given the opportunity to either boot from theCD, or from your hard disk. If not, the XP installer goes directly to this screen first :
http://www.microsoft.com/windowsxp/pro/howtobuy/upgrading/compat.asphttp://www.microsoft.com/windowsxp/pro/howtobuy/upgrading/compat.asphttp://www.microsoft.com/windowsxp/pro/howtobuy/upgrading/compat.asphttp://www.microsoft.com/windowsxp/pro/howtobuy/upgrading/compat.asp -
7/27/2019 Step by Step Configuration
2/25
*Important Note For RAID Users!!
For those of you wishing to install XP on a RAID based system, you should have a fingerhovering over the F6 key, so that you may install the relevant drivers from floppy disk prior
to install. XP natively supports, for example, the Highpoint HPT370 Raid Controller, yet itdoes not support the Promise FastTrak Lite controller used in many systems such as the
MSI K7T266Pro2-RU. If you do not install drivers at this stage for an unsupported RAID
controller, you will get a third of the way through the install before XP crashes with an"Inaccessible Boot Device" error.Hit F6 when you see this screen :
-
7/27/2019 Step by Step Configuration
3/25
Next, the XP installer will load a series of generic drivers for such devices as SCSI & IDE
controllers. At this point, XP is simply trying out drivers to see what it can find and workwith :
This part of the process can take several minutes, during which time, your CD-Rom drive
will be exceptionally busy, as the XP installer tries out several hundred different driver files.Once this hardware discovery process has finished, you will be given several options :
Provided you are happy to continue, simply hitting your or key will
take you on to the next screen, which contains the Microsoft licence agreement. If you arewilling to accept it, press the F8key to continue.
-
7/27/2019 Step by Step Configuration
4/25
The next screen we encounter, allows us to add or remove partitions, and decide where XPis going to 'live' :
As you can see from the above screenshot, the hard disk which we are going to install XP on
is presently blank, with no existing partitions. If you are happy to use the entire disk spaceas a single partition (namely C:), you can just hit at this point, and XP willautomatically partition the hard disk, and designate it as the drive that will be used. If on
the other hand, you would like to split the disk space into two or more parts (partitions),then you should press to manually designate partition sizes.3. Creating custom partitions using the XP installer.
In the following example, we are going to split the new 10gb hard disk into 2 separate butequal sized partitions, which will ultimately become our C: & D:drives.Having pressed to specify custom partitions, we are presented with the followingscreen :
-
7/27/2019 Step by Step Configuration
5/25
Here, we are going to create a 5gb partition to be used for our startup or boot drive, andanother 5gb partition which we can store personal files on.A calculator can come in handy at this point, as you will have to tell the XP installer what
size the partition will be in megabytes. If you simply wish to use 50% of the disk capacityfor the boot drive then take the overall disk size, which in this case is10229 megabytes,and divide by two. If you intend to specify, for instance a 4gb partition for XP to live on,
then you must multiply the number of gigabytes required by 1024. This may seemstrange, but 1 gigabyte is actually 1024 megabytes.At this point, you may be wondering why the disk size at the top of the screen says one
thing, and the value just above the grey box has a smaller figure. The installer can see theentire size of the hard disk, but such factors as cluster size, and file system overhead can
marginally change that value. Before you go stomping back to the poor guy who sold youthe hard disk, complaining bitterly, be aware, all file systems will do this.Another point to note is that the figure you enter into the grey box in megabytes may bechanged to a small degree by the installer. Again, this is down to cluster size, so don'tpanic if your figures don't exactly tally up.As you can see below, the 5120 megabytepartition that we specified has been changedslightly :
-
7/27/2019 Step by Step Configuration
6/25
At this point, we can either create the second partition, or leave it until after XP is installed.
As a matter of good practice, it's probably best to get all your partitioning finished at this
point. In order to create the second partition, just use your cursor keys to move tothe unpartitioned spaceand press again.
As you can see, we now have a C:& E:partition. This may seem a little weird, but in effectthe reason that our second partition has not taken the D:drive letter is because during the
initial hardware detection, our cd-rom drive has claimed D: . When XP is installed, youshould find that the drive letter have juggled themselves into a more orderly fashion.4. Formatting your drives.After you have made your partitions, whether it be a single one using the entire disk
-
7/27/2019 Step by Step Configuration
7/25
capacity, or multiple ones, you will need to decide which drive to install XP to. It is common
practice to use the C: drive, as most software will want to install there, and it saves an
awful lot of confusion later on. In addition to this, you may find that if you install XP onto adifferent drive, some software may not work properly!
Once you have selected the drive which you are going to install XP to, you are presentedwith several formatting options.Unless you have a real need to format the drive so that other operating systems such as
Windows 98 can use it, I would recommend formatting with NTFS. The NTFS file system is
a more secure, stable & optimised file system than FAT or FAT32, and despite XP's ability to
use FAT/32 I do not believe that either are as well suited in terms of reliability orperformance.Once you have decided which file system you are going to use, you can format the diskeither conventionally, or using the quick option. If you are sure that the disk is reliable and
does not contain any bad sectors, using the quick format can save you quite a bit of time.If on the other hand, you are unsure of the drive's integrity, or the disk is new, Irecommend using the conventional (but slow) format. It may take some time to
conventionally format a drive, but it may save you a lot of heartache later on.
-
7/27/2019 Step by Step Configuration
8/25
5. Copying Files.
Once the installer has formatted the C:partition or drive, it will begin to copy all the fileswhich XP needs onto the hard disk :
This part of the install process can take quite some time, even on the fastest of machines.
The longest part of the file copy is the transfer of the driver.cabfile onto the hard disk. If
your machine looks like it's stalled, or hung at this point, don't panic.... this file is huge, andcan take a long time to copy.
-
7/27/2019 Step by Step Configuration
9/25
Once the file copy has completed, your machine will reboot. It is not necessary to removethe installation CD at this point.
Upon restart, your machine will give you the option to boot from CD. This is unnecessary,
as enough of the XP installation set exists on the hard disk to continue without booting fromthe CD. Basically, when your computer prompts you to "press any key to boot fromCD" dont!At this point, the graphical part of installation will start. The machine will continue to copy
files from the CD, and generally configure XP. Expect to wait some time while this part ofthe process occurs :
-
7/27/2019 Step by Step Configuration
10/25
After this, XP will do an in-depth detection of your hardware. You may find that your screengoes blank or flickers several times. This is nothing to worry about, as the installer is tryingto figure out exactly what hardware is inside your computer :
-
7/27/2019 Step by Step Configuration
11/25
6. Getting InteractiveOnce hardware detection is complete, it's time for you to set up your personal preferences.First on the list is establishing your location and input language :
-
7/27/2019 Step by Step Configuration
12/25
The default settings for location and keyboard layout are US, so you might want to changethese depending on your country. Firstly, alter your location and format settings by clickingthe 'Customise' button.
-
7/27/2019 Step by Step Configuration
13/25
As you can see from the above screenshot, I have changed my 'Standards & formats' toEnglish (United Kingdom). This allows me to use the correct currency symbol for my
country, as well as the correct notation for both numeric and time / date displays.Additionally, I have also set my location to 'United Kingdom'.Once you are happy with your selection, click 'Apply' to save the changes, and then 'OK' toreturn to the previous screen.Next up, we need to change our keyboard layout to suit our location. This aspect of the
install is a little annoying as common sense dictates that if i live in the UK, it's more thanlikely I will be typing with a UK keyboard!Click the 'Details' button to be presented with this screen :
-
7/27/2019 Step by Step Configuration
14/25
Now here's the tricky part. By default, the installer will only have provided you with anEnglish (United States) keyboard layout. To install a different keyboard layout, you will
need to click the 'Add...' button, and select your chosen layout from the list that appears.
Once you have clicked OK to return to the above screen, you need to click on the drop down
box located at the top of the window, and select your preferred layout. If you don't do this,XP will start up with a US keyboard by default. It isn't a big problem to change this later,
but you might as well set it right to begin with!You may be tempted to delete the un-necessary US keyboard layout, but unfortunately theinstaller wont let you, since it is presently using it.Again, once you have set your preferences, click 'Apply' to save the changes, and 'OK' toreturn to the previous screen.At this point, it's safe to click 'Next>'The next question the installer will ask is your Name and Organisation Details :
-
7/27/2019 Step by Step Configuration
15/25
Simply type your name, and if applicable, the name of your organisation or company.Next, you will need to enter your product licence key, which should be located either on theWindows XP manual, the back of the CD case, or on a sticker which you should attach to
your PC.
-
7/27/2019 Step by Step Configuration
16/25
Be careful when you enter this code. If you get even one digit wrong, XP will refuse tocontinue installation until you correct the error.
Once you have entered the product key details correctly, you will be asked for a name for
your computer and an administrator password :
-
7/27/2019 Step by Step Configuration
17/25
Be especially careful when entering an administrator password. Ensure the password issomething that you will not easily forget, and if possible substitute certain letters fornumbers eg. I's become 1's, E's become 3's and so on.The reasoning behind substituting letters for numbers is so that unauthorised personswishing to gain access to the admin functions of your machine will have a substantially
harder time getting in if they cant spell the password the way you have. The administratoraccount on your machine is very powerful, and any unauthorised person gaining access to
your machine (either in your absence or via the internet) using that account can do a greatdeal of harm.Once you are satisfied with the machine name, and your password, you will be asked to setyour date, time & time zone, relative to GMT :
-
7/27/2019 Step by Step Configuration
18/25
As you can see below, I have set my time zone to GMT :
-
7/27/2019 Step by Step Configuration
19/25
Once you have completed this task, the installer will configure your networking. If yourmachine is connected to a LAN (local area network), XP will give you the option of selecting
either typical settings or custom. If your machine is part of an office, or small home
network, it is usually perfectly acceptable to select typical settings, as XP can normally work
out your settings for you. If in doubt, ask your system administrator for applicable settings.
-
7/27/2019 Step by Step Configuration
20/25
Next, the installer will ask you for the name of your workgroup. A workgroup is a nameused to identify a collection of computers within a local area network, most commonly foundwithin an office environment.If your computer is used at home, or is stand alone, it is not necessary to set a workgroupname. As an example here, we have made this machine a member of the 'Bitbendertech'workgroup.
-
7/27/2019 Step by Step Configuration
21/25
7. Finishing Off
Once you have completed the interactive steps, the installer will copy the files necessary forconfiguring your networking:
-
7/27/2019 Step by Step Configuration
22/25
After that, the XP installer will spend a considerable amount of time finalizing settings, andconfiguring your computer. During this part of the process, your computer is doing aremarkable amount of work, so don't get concerned if it seems to be taking a long time :
-
7/27/2019 Step by Step Configuration
23/25
Once this final step is complete, your machine may reboot, and you should see :
-
7/27/2019 Step by Step Configuration
24/25
8. Final StepsOnce XP has booted for the first time, you will be presented with an incredibly easy to
understand wizard, which will guide you through adding users, configuring internet access,
and setting screen resolution. I have chosen not to cover this aspect of the installation,
because the wizard is remarkably self explanatory, and any discussion here would be un-necessary.Provided the installation has gone smoothly, you finally will be presented with your XPdesktop :
-
7/27/2019 Step by Step Configuration
25/25