stockroom’s · pdf file4 1. why am i getting chatter marks? usually this means your drum...

2

Stockroom’s Favourite

Satisfaction Guaranteed

All You

Supply Is

The Motor “The Flatmaster”

This solid heavy duty, steel constructed sander works the same as the unit you build yourself. The top is secured to a steel frame and the drum moves up and down when adjusting. (see pg. 9).

Sands Awesome!

“Roto Raspa”a new way to shape wood, plastics, etc.

“Woodline Router Bits” for our Canadian Customers

(see pg. 19) (see middle insert Pages A1 - A32)US Customers visit www.woodline.com

3visit our website www.stockroomsupply.com

The “V”-Drum Sander

Unique Features

1. No clips needed for holding paper. VELCRO® brand hook & loop is used for changing paper - simply unroll one grit and roll on another.

2. Sandpaper used on the V-Drum is less costly than the clothback paper used for commercial units.

3. The drum is made from polycarbonate tubing which runs cooler and eliminates static. With no static on the drum, dust won’t stick to the paper. Instead it drops down into the box, allowing for easier dust collection.

4. Centrifugal force is a key element. Firstly it lifts paper off the drum creating an air gap. The air gap prevents the drum from creating heat, which in turn helps paper to last longer. Secondly, centrifugal force means it takes less power to run the “V”-Drum as the drum is not forcing the paper into the wood.

5. Klingspor brand stearate coated paper will sand pine, paint and even nails without damaging to the paper, an extra cost to the user.

6. On longer drums use two or three different grits at once.

7. Depth of cut is changed by switching the grit of sandpaper. If you want to cut more use a coarser grit, cut less use a finer grit, etc.

Antistatic FeatureSee the dust being drawn down into the box (Feature #3)

See

ONLINE VIDEO

DEMONSTRATIONS

www.stockroomsupply.com We have come to realize that sooner or later, every woodworker becomes aware of their need for our V-Drum Sander. Whether it be

for surface sanding, edge sanding, stripping paint, restoration, or whatever unique purpose they have in mind, this sander will do it! Originally designed to be a poor man’s drum sander, this product has changed the way woodworkers surface sand. It has been

featured on HGTV’s In The Workshop, and in several magazines within Canada and the US. The word continues to spread

about this outstanding tool.

“The Flatmaster”

Using the “V” Drum works kit and an MDF top, this heavy duty, solid steel constructed sander works the same as the unit you build yourself. As with the build yourself models, the Flatmaster does not come with a motor. The unit is specially designed for basic motor mount. The heavy duty metal fences are sold with the Flatmaster or sold separately. Each single Fence comes with a pair of Feather Wheels (pg. 9). These fences are bent within a 1° tolerance. They are not a perfect 90°. If a perfect 90° is required, the fence may be shimmed on the inside or outside depending on the angle.

Centrifugal forCeCENTRIFUGAL FORCE is the key element for making this sander such an impressive machine!! Take time to set it up before you start using it. Initially, the drum must be set below the table. Using the finest grit of sandpaper on the drum and your drum turned OFF, take a flat edged board and slide it over the drum. The drum should be slightly below the table. When tipping up your board, you should be able to see light between the drum and the board. This means that when you slide your board over the drum the paper will not be touching (or ever so slightly, but not enough to sand the wood or turn the drum). When you turn the drum ON, the paper will lift off due to centrifugal force and cause the paper to sand. Once you have this set up, you DO NOT need to change the height adjustment again. To adjust the depth of cut, change from finer to coarser grits.

4

1. Why am I getting chatter marks?Usually this means your drum is set too high and the paper is being pinched between the drum and the wood. This causes uncontrolled feed rates which in turn causes chatter marks. Page 7 explains how to set up your drum. The drum must initially be set slightly below the table with your finest grit of sandpaper (usually a 220g). The theory is that with enough RPM (1750 rpm on 4” diameter drums and 2200 rpm on 2” diameter drums) the paper will lift off the drum due to centrifugal force. The paper will only lift off until the loop is engaged at the end of the hook -- .0018”. Because the paper is not touching the drum, the paper is allowed to cut without creating heat (due to the air gap between the paper and drum – no friction – no heat). Consider the paper floating around the outside of the drum providing a soft touch to your work with no pinching of the paper.

2. When building my own sander, what plan am I supposed to follow?You can be as imaginative as you like and come up with your own version, but we say the EASIEST and most STRAIGHTFORWARD plan to follow is the DVD version (which includes a Parts and Cut list). This plan also incorporates the Top that we sell (or shows you how make your own). A DVD comes with each kit but may also be viewed online. Other creative plans are available on our website.

3. Which way should the drum be turning?The drum should be set so that it is turning TOWARD the operator.

4. How do I adjust the depth of cut?When you want to change the depth of cut of your sander, it’s as simple as changing the grit. If you want to cut more, put on a coarser grit. If you want to cut less, put on a finer grit. The grits available range from 60-1500g.

5. The paper keeps flying off the drum...what should I do?In order to prevent this from happening, we recommend that you cut the paper’s pointed tips off square. (If you see us at the show, this is what we do, although once in a while the paper still comes off. We call this our disappearing paper trick!) If you do this and your paper still comes off, you may want to double check to see that your drum is below the table. Another reason the paper could be coming off is simply because it is worn out. You can generally take each piece on and off 20-30 times. The paper has also been known to come off when the drum is running too fast. 18” drums should have a motor running at 1725 RPM (the balanced drive system will cause the speed to increase to 2250 RPM). The 24” and 30” drums require a 1/2 HP motor running 1725 RPM. Under NO circumstances should the 24” or 30” drums run any faster.

6. Why does the top of the drum sander have to be so thick? There cannot be any flex in the top or your sander will not sand properly, so by making the top thick, it prevents this from happening.

7. What motor size do I need?The air gap caused with this sander allows for the use of fractional hp motors. ¼ hp is required for the 2” diameter (18”) and a ½ hp is required for the 4” diameter (24” & 30”) running at 1725 rpm. Under no circumstances should the 24” or 30” drums run any faster.

8. Does the hook and loop on the drum ever wear out? It should never wear out, since it isn’t being crushed or heated up by wood being pushed into it, but in the event it does wear out, we warranty it and will replace it for you.

9. When wrapping the sandpaper on the drum, does it matter if there is a gap in the sandpaper where the drum shows through? As long as the paper is rolled on evenly, it does not matter if there is a gap. When the drum spins fast, the gap is irrelevant.

10. Do I need a dust collector for my drum?The V-drum Sander is made with a special anti-static polycarbonate tubing. This, in turn means that when you are sanding, most of the dust you are creating just falls into the box below. The dust is not “charged” and therefore does not float in the air. Although there is a minimal amount of dust, we highly recommend the use of a dust collector in some way, shape or form. What most people do is simply cut a hole in the side as a port for a vacuum or dust collection system. We even have a woman who has purchased the drum, who keeps the V- drum Sander in her spare bedroom and hooks her vacuum cleaner up to it when she sands. She loves it and uses it regularly!

11.Why does this drum sander sand from the bottom when most other drum sanders sand from the top?When the drum is on the top, you may find yourself sanding through the sawdust that you have already produced. No dust collector can remove all this sawdust. Sooner or later, the sawdust will start loading and the sandpaper will work inefficiently. The sawdust created with the V-Drum sander (or Flatmaster) is drawn downward so you are always sanding a cleaner piece of wood and finishing with a cleaner surface.Another advantage to the drum being on the bottom is that the surface of the table can be used as a set up point. The sandpaper will only make contact with what the flat surface will allow. The results are that you can sand a twist to match the flat surface. Also, sanding off a flat surface allows the user to sand past the end of the drum, turn the piece around and sand the other side without leaving a large overlap mark.

12. Can I convert my existing drum sander to hook and loop?Yes, you can, but be prepared that converting your drum sander over to the hook and loop fastening system is going to change everything you have been taught about how to sand with your drum sander. All drum sanders are designed to pinch the sandpaper between the drum and the wood in order to cut. This is what creates heat. Heat then breaks down the resins in the wood, allowing the sandpaper to load up and burn the finish. Also, hook and loop conversion CANNOT withstand heat. It is made from plastic and if it heats up, it will melt. When you have the hook and loop system on your drum, you need to change the way you have your drum set up in order to prevent heat from building up. With the hook and loop system, when the drum is turned on, the paper actually lifts off the drum. This is called centrifugal force and it is the basis behind making the hook and loop system work for you. You will want to set your drum up so that the drum is not touching the wood, but when you turn your drum on, centrifugal force will lift the paper off the drum allowing it to sand. You may have to change this adjustment depending on which grit you have on your sander. This will leave an air gap between the drum and paper preventing heat build up. This is a completely different concept than most people are accustomed to, but it is the only way to make the hook and loop system work. People either love this system, or hate it. The ones who hate it are the ones who cannot understand this new concept. The ones who love it will never go back. Also, when switching to this system, we recommend using 80 grit sandpaper and finer. Any coarser and the sandpaper causes too much drag and the sandpaper sometimes comes unhooked.

Frequently Asked Questions

Visit us at your local WoodShow - see page 5

5See page 13 for “V”-Drum Replacement Sandpaper

“V”-Drum Sander

The Works KitThe “Works Kit” includes the internal workings of the Sander. It includes a drum, bearings, 2 - 10yd rolls of sandpaper, 2 balanced pulleys, link belt, and a DVD on How to Build. (Visit our website for additional plans.) Sizes of bearings, pulleys and length of link belt will vary according to the size of drum ordered.

Item # Description & Size Price

DR1212 12” x 2” Extended V-Drum *The Works $205.00

DR1212A 12” x 4” Extended V-Drum *The Works $250.00

DR1812 18” x 2” V-Drum *The Works $235.00



Item # Description & Size DIY Series Pro Series (Aluminum)

DRTOP18 Top for 18” V-Drum Sander15” x 30” $89.00 $139.00

DRTOP24 Top for 24” V-Drum Sander15” x 36” $109.00 ---

DRTOP30 Top for 30” V-Drum Sander15” x 42” $114.00 ---

Drum Sander TopBuilding a drum sander has always been very simple. It’s basically just a box with a lid. It’s very important that this lid is just flat and smooth to achieve optimum performance from your drum sander. These tops are all pre-cut and made from MDF with laminate on both sides. NEW -- Now you have the choice of 1-1/8” MDF with plastic laminate - DIY Series Tops OR ¾” HD-MDF laminated with anodized aluminum – Pro Series Tops (only compatiple with 18” works kits).

2” diameter drums (18”)require a 1/4 hp motor

4” diameter drums (24” & 30”)require a 1/2 hp motor

Item # Description & Size Price

DRBOX18 Drum Box - 18” $122.50



Pre-Cut Drum BoxThis kit contains 8 pieces of pre-cut and predrilled ¾” Baltic Birch plywood which may be easily assembled using hardware you provide. A list of hardware required is included.

“The Flatmaster” Item # Size Price Pricewith fences

DRFL18 18” Flatmaster $485.00 $735.00

DRFL24 24” Flatmaster $569.00 $819.00

DRFL30 30” Flatmaster $609.00 $859.00

DRFE1 Single Metal Fence $139.00 ---

DRFE2 Pair of Metal Fences $270.00 ---

This steel constructed sander comes preassembled, with a strong aluminum on MDF top. It comes in 3 sizes, 18”, 24” and 30”. Each sander includes 2 additional rolls of paper (3” x 10yd, 100g and 180g). The purchaser needs to supply a motor – ¼ hp for the 18” or ½ hp for the 24” or 30”. See motor specs below. Fences may be purchased separately or in combination with Flatmaster. Each single fence comes with 2 Feather wheels. See pg. 13 for Sandpaper Rolls.

6 Toll Free Ordering 1-877-287-5017

Show Listing 2011-2012

US Show List

Oct. 23, 24, 25 2009Dallas, TX

Big Town ExhibitionHall

Oct. 30, 31, Nov. 1, 2 2009

Costa Mesa, CA Orange County

Fairgrounds

Nov. 6, 7, 8, 2009Portland, OR

Portland MetropolitanExpo Center

Nov. 13, 14, 15 2009Sacramento, CA

Sacramento Convention Center

Nov. 20, 21, 22 2009 Denver, CO Merchandise Mart

Dec. 4, 5, 6 2009Minneapolis, MN

Minneapolis Convention Center

Dec. 11, 12, 13 2009Chicago, IL

Schaumburg Hotel and Convention Ctr.

Jan. 8, 9, 10 2010 Baltimore, MDMD State Fairgrounds

Jan. 15, 16, 17 2010Columbus, OH

OH Expo Center and State Fair

Jan. 22, 23, 24 2010 Indianapolis, ININ State Fairgrounds

Jan. 29, 30, 31 2010Atlanta, GA

North Atlanta Trade Center

Visit www.thewoodworkingshows.com

Oct. 2, 3, 4 2009 Woodstock, ONWoodstock Fairgrounds

Oct. 16, 17, 18 2009 Abbotsford, BCTradex

Oct. 23, 24, 25 2009 Calgary, ABStampede Grounds

Oct. 30, 31, Nov. 1 2009 Edmonton, ABNorthlands Park

Nov. 6, 7, 8 2009 Saskatoon, SKPrairie Land Park

Canadian Show List

Nov. 13, 14, 15 2009 Moncton, NBMoncton Coliseum

Nov. 27, 28, 29 2009 Ottawa, ONLansdowne Park

Jan. 29, 30, 31 2010Hamilton, ON

Hamilton Warplane Museum

Feb. 12, 13, 14 2010London, ON

London Fairgrounds

Feb. 26, 27, 28 2010 Toronto, ONInternational Centre

Mar. 12, 13, 14 2010 Kitchener, ONBingeman Park

Feb. 5, 6, 7 2010 Milwaukee, WIWI Expo Center

Feb. 12, 13, 14 2010 St. Louis, ILGateway Center

Feb. 19, 20, 21 2010Kansas City, KS

Overland Park Int’l Trade Center

Feb. 19, 20, 21 2010Somerset, NJ

Garden State Exhibit Center

Feb. 26, 27, 28 2010Detroit, MI

Gibraltar Trade Center North

March 5, 6, 7 2010Reading, PA

Greater Reading Expo Center

March 12, 13, 14 2010Fredericksburg, VA

Fredericksburg Expo & Conference Center

March 19, 20, 21 2010 Tampa, FLFlorida State Fairgrounds

March 26, 27, 28 2010 New England

Apr. 9, 10, 11 2010 Chantilly, VADulles Expo Center

Apr. 16, 17, 18 2010 Houston, TXMerrell Center

Apr. 23, 24, 25 2010 Huntsville, ALVon Braun Center

7

Ordering Information

Feb. 5, 6, 7 2010 Milwaukee, WIWI Expo Center

Feb. 12, 13, 14 2010 St. Louis, ILGateway Center

Feb. 19, 20, 21 2010Kansas City, KS

Overland Park Int’l Trade Center

Feb. 19, 20, 21 2010Somerset, NJ

Garden State Exhibit Center

Feb. 26, 27, 28 2010Detroit, MI

Gibraltar Trade Center North

March 5, 6, 7 2010Reading, PA

Greater Reading Expo Center

March 12, 13, 14 2010Fredericksburg, VA

Fredericksburg Expo & Conference Center

March 19, 20, 21 2010 Tampa, FLFlorida State Fairgrounds

March 26, 27, 28 2010 New England

Apr. 9, 10, 11 2010 Chantilly, VADulles Expo Center

Apr. 16, 17, 18 2010 Houston, TXMerrell Center

Apr. 23, 24, 25 2010 Huntsville, ALVon Braun Center

Easy Ordering OnlineStockroom Supply is a mail order company only, and does not have a retail outlet. For personal shopping, visit us “The Traveling Sandpaper Store” at your local woodshow, or on our website www.stockroomsupply.com.

Shipping Within CanadaSee price chart on following page.Shipping within Canada is “FREE” (using Expedited Parcel) when placing an order of $200. or greater (before taxes.) Additional shipping will be charged to ship to an Airstage address.

Shipping to the USAOrders shipped to the USA are shipped using UPS. Orders typically take between 5 and 10 business days to arrive at their destination depending upon stock availability. Faster shipping is available upon request. Additional charges would apply. See price chart on the following page. Shipping to the 48 US States is now “FREE” when placing an order of $200. or greater. Additional shipping charges and/or an alternate carrier may be utilized when shipping to Alaska and Hawaii.

TaxesOrders to Ontario pay 5% GST and 8% PST. Orders to New Brunswick, Newfoundland, and Nova Scotia pay 13% HST. All other orders within Canada pay 5% GST only. Tax is also charged on shipping costs. US customers disregard all tax amounts.

Payment OptionsWe accept Visa, Mastercard, American Express, cheques and money orders. C.O.D. is available for an additional charge of $8.00 within Canada only.

Minimum OrderThere is no minimum order required with Stockroom Supply.

QuotesSome sizes, grits or materials of sandpaper not listed in this catalogue may still be available. Feel free to call us and we will let you know about availability and cost. Please note: when an item is ordered in special for the customer, it is unable to be returned.

Return PolicyWe will accept return of goods at no extra charge including freight when the following conditions apply: 1. We have made an error in shipping or processing your order. 2. There are defects in the product.

For items being returned due to the customer ordering wrong product, or for some other reason, all freight charges will be paid by the customer. When an item is ordered in special for the customer (usually something not listed in the catalogue), it is unable to be returned.

To Make a ReturnP l e a s e

Free Shipping on orders of $200 or more within Canada AND USA

It is difficult to inspire others to accomplish what YOU haven't been willing to try

8

Ship to: Canada USA

Payment Method:

Card # ______________________________

Expiry: ______________________________

Signature: ___________________________

Cheque -

C.O.D.

VISA, MC, AMEX

Order Form

-- New Catalogue sent with every order --

Name: _______________________________________________________Address: ______________________________________________________________________________________ P.C. / Zip ____________________Ph: _____________________ Email: _______________________________

Cdn US

Order by:

Easy Online Ordering: www.stockroomsupply.com Phone: 1-877-287-50178 am - 4 pm EST Mon. - Fri.Email: [email protected]: Stockroom Supply 53032 Perry Rd. Wainfleet, ON L0S 1V0

Product #(optional) Page # Qty Description Grit

(if req’d) Price ExtendedPrice

Subtotal

..........................................Shipping

C.O.D. (Canada Only)(Add $8.00)

USA TOTAL DUE or Cdn. Subtotal

5% GST 13% HST (NB, NF, NS Only)

8% PST (Ont. Only)

Canadian ToTal due

FReeSHiPPinG

on all orders over $200.within Canada and uSa!!!

Some restrictions apply - See previous page

Toll Free Order Phone 1-877-287-5017

$0-$150 subtotal

$150 - $200 subtotal

Ontario $8.00 $6.00All other

Provinces $10.00 $8.00USA $15.00 $13.00

9

Feather Wheels

Made from a very flexible, rubber-like material, these wheels will flex

to conformto the shape and thickness of anything you may be trying to

hold down. These great little wheels will maintain a constant pressure on

the wood, without causing needless damage to a finished surface. Feather Wheels are tough enough for commercial use and come with a lifetime

warranty.

Item # Size Price Each Price Pair

FW2000 Feather Wheelwith Mounting $35.99 $64.99

Feather Wheelwith Mounting Bracket

Features•• non-marring•• conforms to irregular shapes•• inexpensive hold down system•• excellent shock absorption•• abrasion resistant

Item # Description Price Each

CONT500 The Contour 500 $479

ROFLEXA *Replacement Paper Large Drum $14.95

ROFLEXB *Replacement Paper Small Drum $6.95

The Contour 500 will allow the user to shape wood at a professional level by blending in curves and dips. Using a hook and loop system and a brand new sandpaper that we like to call “Soft Gold”, this top of the line foam backed sandpaper won’t load or build up heat. Great for paddles, intarsia, Queen Ann legs and whatever your imagination can create! Comes with 1 loading of 4 grits – 80, 120, 220 and 320.

Item # Description Price Each

VACTABA Vacuum Table 16” x 17” $139.00

The Contour 500 Vacuum TableFor use with Stockroom’s Flatmaster or V-Drum Sander and fences (Stockroom’s fences not mandatory). Designed to parallel and thickness sand. Includes foam sealer, plugs, vacuum attachment, brackets for fences.

An Affordable

HOLD DOWN

SYSTEM

Top Side

Outstanding for Segmented Bowls

Under Side

visit our website www.stockroomsupply.com

10

Balanced Drive Systems•• Anti-Vibration•• Stops your machine from shaking•• Reduces noise•• Reduces bearing wear•• Makes smoother cuts•• Prolongs blade life in saws•• Speeds up the finishing process

Balanced Drive Systems

Item # Size Price

LB180 1/2” link belt x 18” length $10.50

LB360 1/2” link belt x 36” length $20.99

LB120 1/2” link belt per foot $7.00

LB120A 3/8” link belt per foot(drill press, some tablesaws) $8.00

LB120B 5/8” link belt per foot $14.99

Balanced PulleysMany woodworking machines, even brand new machines, use unbalanced pulleys. These work great for the average woodworker, but these days woodworkers are spending big bucks on blades and knives. With these new technology balanced cutters, you should probably consider balanced pulleys for your machines. Used in combination with linkbelt, there will be no vibration transmitted from a balanced drive system. These pulleys are machined cast iron and are a significant upgrade to any machine for a minimal cost.

Item # Size Price

PUAK17X1/2 ½” x 1.8” (for 18” drum- on drum) $9.99

PUAK20X1/2 ½” x 2” (for 18” drum- on motor) $9.99

PUAK30X5/8 5/8” x 3” (for 24” & 30” drum on both drum & motor) $12.99

PUAK22X5/8 5/8” x 2” (for tablesaw - both & bandsaw for motor) $9.99

PUAK46X3/4 3/4” x 4.45” ( bandsaw - top pulley) $19.99

Toll Free Ordering - 1-877-287-5017

Anti-Vibration Link BeltThis super flexible drive belt greatly reduces the transfer of vibration with all your woodworking machines. Unlike a rubber belt, which will take the shape of the small diameter pulleys that are used on most woodworking machines, the individual link on this drive belt keeps it flexible for life. It is also very easy to use and can be adjusted to any length. Available in 3/8”, 1/2” and 5/8”.

GREATPRICE!

Anti-Vibration Drives for all your shop machinesDrum Sander •• Belt Sander •• Drill Press •• Table Saw •• Band Saw •• JointerAnd More…

11STOCKROOM SUPPLY - Abrasive Specialists

Low Profile Pillow Block BearingsComplete with the locking collars, the compact size of these bearings allow the drum diameter to clear the bearing. ½” for the 2” diameter drums. 5/8” for the 4” diameter drums.

Accessories

Motor Arbor AdaptersAllows you to adapt a Sanding Mop, buffing wheel, etc. onto the end of an electric motor. Locks into place with allen screws. MO1003 and MO1004 are extra long motor arbor adapters that allow you to spin accessory farther away from motor.

Flexible CouplingAllows shaft to attach directly to motor. Locks into position with the use of allen screws.

Keyless ChuckSlides onto a shaft and instantly creates a new place for drill bit, Sanding Mop, etc. Locks into position with allen screws.

Hook & Loop FaceplateUse as a disc sander on the end of an electric motor. Just slide onto shaft, lock it in place with the allen screws and instantly you’ve created your own 8” hook and loop disc sander.

DR5001 ½” (pair) $30.00

DR5002 5/8”(pair) $30.00

MO1001 ½” Standard $8.99

MO1002 5/8” Standard $8.99

MO1003 ½” Deluxe $18.99

MO1004 5/8” Deluxe $18.99

Item # Size Price

DR5003 1/2” $12.99

DR5023 ½” $22.99

DR5024 5/8” $22.99

DR5013 1/2” $19.99

DR5014 5/8” $19.99

The secret to making sandpaper work for you is to choose the right grit for the job. The bigger the grit the more material you will remove. Therefore, always use a coarse enough grit to remove the imperfections quickly then start stepping up thru the finer grits. Each finer grit removes the scratches from the previous grit. Soon the surface will have no visible scratches and will be smooth to the touch.

12

Jig Making AccessoriesMake a Fence

for your “V”-Drum Sander3/4” Mitre T-Track

Fits standard mitre gauge or can be used with the T-Bolts we sell. Great for making your own fences and jigs.

Item # Size Price Each

JMT516x112 5/16” x 1-1/2” $2.00

JMT516x212 5/16” x 2-1/2” $2.00

JMT38x212 3/8” x 2” $2.00

KnobsWork great for building your own fences and jigs. The 3/8” through knob is the most popular and works with the 3/8” T-Bolts. Knobs are priced and sold invididually.


JM516F 5/16” Through Knob $1.50

JM038F 3/8 “ Through Knob $1.50

JM516M 5/16” with 3/4” shaft $1.50

JM0114 pc 3/8”

Through Knobs & 4 pc 3/8” x 2” T-bolts

$12.00

T-BoltsThese work great for jigs, fixtures and hold-downs. All of these heavy duty T-Bolts will work in the 3/4” Mitre T-Track we sell. The 3/8” T-Bolts are the most popular and work with the 3/8” through knobs. T-Bolts are priced and sold individually.

Visit our website www.stockroomsupply.com


JM1200 11-3/4” $5.25

JM2400 24” $9.95

JM3600 36” $14.75

JM4800 48” $19.49

What we mean when we call sandpaper freSH We must sound like we are selling you fruit or vegetables, but believe it or not, sandpaper can get old and rotten too! You the consumer need to be an informed buyer! Think about this scenario. You stop by a local retail store and grab a sheet of 80 grit sandpaper for a special project. At home in the workshop, you use that sheet of paper and it is lasting a long time - cuts like crazy, doesn’t load up - just exactly what you expected. Your project is just about complete when that sheet of paper is too worn out to continue. Off to buy another sheet of sandpaper, only this time you stop at a different store. The sheet is exactly the same brand and grit, so you assume the same quality as before. This time though, the grit appears to fall off fairly easily and it is wearing out much more quickly! What you have just experienced is the result of “OLD” sandpaper. You will find this scenario can happen with belts, sheets, discs or anything “abrasive”. When sandpaper becomes old, or subjected to improper storage conditions, the glue may become dried out. This causes the sandpaper to become brittle and the grit falls off prematurely. When purchasing sandpaper, try to buy the freshest possible. It will cost you less in the long run.

13

Flatmaster / “V” Drum Sander RollsThis Stearate coated aluminum oxide paper backed roll, is primarily sold for our “V” Drum Sander. It is the same outstanding material as our hook & loop discs. Get the finish you desire without your paper loading up.

STOCKROOM SUPPLY - Abrasive Specialists

Sanding Rolls

Paper of Choicefor the

“V” - Drum

What Does Stearate Coating Mean?Numerous particles of abrasive grit are glued to paper or cloth to be used as sandpaper. If you magnify a tiny piece of this grit, you would discover it to be irregularly shaped. When a stearate coating is applied over this grit, it fills in the area around the bottom of each piece of grit where sawdust, paint, and varnish debris can get trapped and cause the surface to become plugged. This zinc stearate coating fills in those nooks and crannies, while maintaining the cutting ability of the sandpaper, and with Klingspor’s special coating, no residue from the process is left behind when you sand. Because of this surface treatment, the sandpaper becomes a non-loading paper thus meaning longer life from your sandpaper investment. Due to less debris stuck into the paper, there is less friction and less heat build-up, further extending the life of the paper (as well as the sander you may be using). The sandpaper also has better flexibility when coated and the grit does not come off as easily.Klingspor’s slogan is “The Most Sanding Power for Your Money!”, and that is the truth. Whether you are a hobbyist or professional craftsman, you will appreciate the performance of Klingspor’s stearate coated products and the premium finish you will receive. It is definitely worth the extra money spent, no questions asked!!

W L 60 80 100 120 150 180 220 240 320 400or 600

800, 1200, or

1500

3” 5yd $11.95 $10.95 $10.95 $10.95 $10.95 $10.95 $10.95 ---- $10.95 ---- ----

3” 10yd $23.95 $19.95 $19.95 $19.95 $19.95 $19.95 $19.95 $19.95 $19.95 ---- ----

3” 25m $49.95 $42.95 $42.95 $42.95 $42.95 $42.95 $42.95 $42.95 $42.95 $42.95 $49.95

4” 25m $74.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 $59.95 ---- ----

4.5” 5yd $19.95 $13.95 $13.95 $13.95 ---- $13.95 $13.95 --- $13.95 ---- ----

4.5” 25m $94.95 $65.95 $65.95 $65.95 $65.95 $65.95 $65.95 $65.95 $65.95 ---- ----

This is industrial strength hook & loop conversion using VELCRO® brand hook and loop fastening system, with a premium adhesive backing - meaning tremendous holding power. Now if you need to, you can replace the hook and loop on your “V”-drum or convert an existing drum sander to the hook and loop system. Consider the possibilities with this versatile product.

Hook and Loop Conversion

Item # Description Price

CV1003 3” wide - per foot $5.99


CV1012 12” wide - per foot $12.99

Can I convert my existing drum to hook and loop?Yes, but first it is suggested that you read the detailed answer to this question on page 4.

Cut 4-1/2” rolls to length for

1/4 sheet and ½ sheet sanders

14

Sanding Rolls


Hook and Loop Heavy Paper RollsWe are carrying this in our catalogue primarily for those who wish to have a heavier paper for their projects. It is best used with drums that have a diameter of 4” or greater. This hook and loop, heavy backed paper is an open coat, anti-static aluminum oxide for hard and soft woods.

Width Length 60 80 100 120 150 180 220

3” 25m 67.95 $60.95 $60.95 $60.95 $60.95 $60.95 $60.95

4” 25m 94.95 $84.95 $84.95 $84.95 $84.95 $84.95 $84.95

4-1/2” 25m 119.95 $107.95 $107.95 $107.95 $107.95 $107.95 $107.95

Cloth Back Drum Sander RollsFor optimum performance on both hard and soft woods, this polyester, open-coat abrasive is exactly what is recommended for your commercial drum sander unit.

— Use in Conjunction with Abrasive Cleaning Block for longer Sandpaper life ---

J-Flex RollsKlingspor “Gold” non-loading J-Flex rolls are the same unique cloth backed material as the Sanding Mop. This incredibly flexible and durable product will astound you with its’ life span. Turners will be in their glory with the performance and availability of this product.

Size 120 220 320 400 1 of each grit

2” x 5’ $6.50 $6.50 $6.50 $6.50 $23.00

Width Length 80 100 120 150 180 220 240

2” 50m $128.00 $128.00 $128.00 $128.00 $128.00 $128.00 $128.00

3” 50m $169.00 $169.00 $169.00 $169.00 $169.00 $169.00 $169.00

3” 18m $56.00 $56.00 $56.00 $56.00 $56.00 $56.00 ---

4” 50m $234.00 $234.00 $234.00 $234.00 $234.00 $234.00 $234.00

5” 50m $297.00 $297.00 $297.00 $297.00 $297.00 $297.00 $297.00

6” 50m $354.00 $354.00 $354.00 $354.00 $354.00 $354.00 $354.00

Width Length 80, 100, 120, 150, 180, 220, 240, 280, 320 400 500 600

1” 10yd $9.50 $9.50 $9.50 $9.50

1” 50yd $26.95 $26.95 $26.95 $26.95

1-1/2” 50yd $39.95 $39.95 $39.95 $39.95

2” 50yd $49.95 $49.95 $49.95 $49.95

3” 50yd $89.95 -- -- --

Cloth Back Shop RollsThese general purpose shop rolls are handy to have around for a wide range of metal and woodworking tasks you come across in your workshop. Especially useful for wood turners and carvers with the flexible cloth backing. Most popular grits are 80, 120 and 220.

15

Width Length 80, 100, 120, 150, 180, 220, 240, 280, 320 400 500 600

1” 10yd $9.50 $9.50 $9.50 $9.50

1” 50yd $26.95 $26.95 $26.95 $26.95

1-1/2” 50yd $39.95 $39.95 $39.95 $39.95

2” 50yd $49.95 $49.95 $49.95 $49.95

3” 50yd $89.95 -- -- --

A must for woodworkers...If you are a woodworker and you do any sanding on contoured edges or irregular surfaces, the “Sanding Mop” is the product for you!! This neat little product sands some

of the hardest to get at spots. Great for wood moulding, raised panel doors, carvings, bowls, furniture, table legs, restoring antiques... When your option seems to be “I guess I’ll have to sand it by hand”, let the Sanding Mop do it for you and watch it leave the detail on your piece along with a beautiful finish! This outstanding product is made from Klingspor’s best stearate coated, extremely flexible sanding cloth. The gold coloured aluminum oxide abrasive grit is designed for metal or wood, stearate coated so it won’t plug or heat up, and glued to a double woven Egyptian cloth for the best flexibility and the longest wear available.Keep in mind that the sandpaper material used in these mops, also works great on metal. These mops work excellent when removing oxide and clear coat before buffing, while maintaining the detail of the piece. You’ll wonder how you ever got along without it!

The Sanding Mop

Sanding Mops are made from Klingspor’s finest flexible clothback material, pre-slit to prevent detail loss on your project. This gold colour sandpaper is absolutely outstanding!

6” Regular mop using stabilizers on a 1/4” mandrel

6” Fluffy mop using spacers on an extra long mandrel

We ship to Canada and USA

How to know which grit(s) to use?Sanding Mop grits available are 80, 120, 180, 220 & 320. When ordering 2 grits, keep in mind that the most popular combination is the 120 & 220 grit -- a superior mixture for use on both hardwoods and softwoods. 120g for hardwood, 220g for softwood80 grit - Very aggressive - for rough hardwood, furniture stripping, log home refinishing, patio furniture.120 grit - Most popular grit for hardwood mouldings, panel doors, turnings, legs. Exceptional performance when used with stabilizers on routered edges.180 grit - mainly used on MDF, poplar and other medium hardwoods. Excellent grit in production shops for pine.220 grit - Our most popular finishing grit. Excellent performance on pine. Can be used with stabilizers for edges or with spacers for initial in between coat sanding.320 grit - The most substantial time saver when used with spacers for finishing a project. It does all the in-between coat sanding on carvings and even on assembled raised panel doors. Excellent set up grit for polishers.

The Kits We Sell:Regular Mop– Most popular seller. Use for routered edges, general purposeFluffy Mop– Use in finer grits for inbetween coat sanding, intarsia, carvingsDouble Mop- Use this in place of a regular mop when a wider sanding surface is desired.

View our website forONLINE VIDEO DEMONSTRATIONSwww.stockroomsupply.com

16 Toll Free Ordering - 1-877-287-5017

Moulding Sanderone Customer says...

This crazy sanding mop actually works! The mop has

greatly reduced the sanding time needed and also helped

maintain the standard of quality of our mouldings. Thanks.

Scott Stanton - Owner

Design Moulding

Laurel, Nebraska

Traditionally, moulding sanders have been very expensive, even though they perform a simple task. We have developed a “Build-Your-Own” moulding sanding system by using a custom made arbor, along with our sanding mop sheets. The sanding mops are stacked onto the shaft to create an 7” moulding sander head. Anyone who has ever used a sanding mop will know how well this system works. With a bracket assembly, you have a fully adjustable moulding sander. Just bolt to a base and supply your own motor. Extra sanding heads are sold separately making grit changes quick and easy.

Build YourOwn

MouldingSander


ELM1400 Moulding Sander Kitwith Bracket Assembly $289.00

ELM1200 Moulding Sander Kit $250.00

ELM1100 Moulding SanderHead Only $195.00

ELM1040 Moulding Sander Refill120/220 Combo $160.00

ELM1000 Moulding Sander Refillsingle grits $130.00

ELM004 Moulding Sander Bracket Assembly $69.00

ELM010 Moulding Sander Shaft $69.00

Each moulding sander head comes preassembled. You have a choice of buying a moulding sander assembled with one single grit or a sander where one half of the sander is 120 grit for aggressive sanding and the other half is 220 grit for finishing sanding. As well as the sanding head, the kit comes with two 5/8” bearings, 3’ linkbelt, 2 balanced pulleys (2.2” x 5/8” and 3” x 5/8”) for a 1/2 hp 1750 rpm motor (not included), and a plan on how to build a moulding sander. Find the pattern and more pictures on our website www.stockroomsupply.com.

ELM1100 - 120/220 Moulding Sander Head Only

ELM1400 - Moulding Sander (single grit) with bracket assembly (link belt not shown)

ELM004 - Moulding Sander bracket assembly

View our website for

ONLINE VIDEO DEMONSTRATIONS

www.stockroomsupply.com

17

Mandrel and Motor Arbor Adapters

Item # Size & Description Price

MO1000 1/4” drill/drill press mandrel with ½” shaft $7.00

MO1010 3/8” Extra Long mandrel with ½” shaft $9.00

MO1001 ½” Standard Motor Arbor Adapter $8.99

MO1002 5/8” Standard Motor Arbor Adapter $8.99

MO1003 ½” Deluxe Motor Arbor Adapter $18.99

MO1004 5/8” Deluxe Motor Arbor Adapter $18.99

MO4045 4” Stabilizers (pair) $5.00

MO6045 6” Stabilizers (pair) $5.00

MO0001 Spacers (5 pc) $2.00

SpacersSmall washers to place between some of the sanding mop strips to create a softer mop. Come in packages of 5pc. ( Rubber garden hose washers can also be used )

Visit us at your local woodshow - see page 3

A. Mandrel- 1/4” drill or drill press mount with ½” diameter by 1” long shaft for stacking the sanding mop strips. B. Extra long mandrel.

3/8” shaft with 3” to stack sheets. C & D.- Motor Arbor Adapters- Made to use with electric motors. Just slide adapter onto shaft and lock in place with allen screws.

A

C

C

D

D

Regular Mop Kit Includes 48 sanding strips, 1 regular mandrel, 5 spacers and 2 stabilizers

Choose from these grits - 80, 120, 180, 220 & 320

* 120 & 220 grits are the most popular combination120 g for hardwood, 220 g for softwood

Kits

Accessories

The Sanding Mop

A

B C

D

StabilizersLarge white nylon discs which are used on the outside of the sanding mop to create a stiffer more aggressive sanding mop. These stabilizers keep the sanding strips packed together and only the tips of the strips are used to sand. They are made from a special material that does not mark wood.

B

Fluffy Mop KitIncludes 48 pc sanding strips, 1 extra long mandrel, 20 spacers and 2 stabilizers

Double Mop KitIncludes 96 pc sanding strips, 1 extra long mandrel, 2 stabilizers

This preassembled model includes a regular 120g and 220g mop and a 220g fluffy mop all on one shaft. Built specifically for a drill press. Has a bottom bearing and bracket for mounting on drill press table.

Item CHOOSE 1 grit

Variety Pac – Any 2 Grits

4” Regular Mop $25.00 $45.006” Regular Mop $40.00 $72.006” Fluffy Mop $44.00 --------

6” Double Mop $72.00 --------4” Refill strips – 48 pc – single grit $20.00 $39.006” Refill strips – 48 pc – single grit $34.00 $66.00

3 in 1 Mop $180.00 --------

3 in 1 Mop

18

The Sanding Mop - FAQ’s

Used a 6” x 80 grit sanding mop on this 28’ square barnboard floor


Assembly Suggestions (view video instructions online)

1. If you have a 4” Mop, separate sheets into 1” wide strips. If you have a 6” Mop, go directly to step 2.

2. If you plan on assembling your mop with stabilizers, begin by placing one white nylon disc over the mandrel. If you don’t intend on using stabilizers, skip to step 3.

3. Hold two sanding strips with backs together (blue to blue, grit sides to the outside). Line them up straight and place over arbor (see Fig. A). Lay a 2nd set over the arbor at 90° to the 1st set, to create a cross (see Fig. B).

4. If you will not be using spacers, skip to step 5. If you intend to use the red spacers, you would now place one spacer over the arbor and continue to put one spacer on after every 2 sets (4 sheets). (On the mandrel which comes with the kit, you can fit 24 sheets with 5 spacers, giving you 2 soft mops with each kit.)

5. Continue criss-crossing sets (see Fig. C) until you reach the thickness of mop you desire - between 16 and 48 strips.

6. If you are not using stablizers, skip to step 7. If you are using stablizers, place the other white stabilizer over the mandrel.

7. Tighten the nut and you are ready to use your mop! Place unit securely in a drill, drill press, lathe, bench grinder...

Before using your mop, break it in by holding a peice of scrap wood up to it for several minutes. This will help to break apart the fingers and increase your mops’ flexibility.

To ensure your safety, the use of mask and goggles are recommended.

1- What size Sanding Mop should I use?If you are a woodworker we suggest that you use a 6” Mop because it does not require the same amount of RPM’s as the 4”. A 4” Mop requires a minimum speed of 4000 RPM’s and most woodworkers do not have the tools to run a 4” properly. You will not get the life out of a 4” Mop running it on a drill as you will out of a 6”. If you are working with metal we suggest you use a 4” and run it using air tools. Overall, you are going to get a longer life out of a 6” Sanding Mop.

2- How long will my Mop last?One thing to remember about the mop is that speed is the key. The faster you spin the mop the longer they will last and the better they will work. 6” mops need to be spun between 2000 and 3500 RPM’s. 4” mops need to be run between 4000 and 10,000 RPM’s. Cordless drills and some electric drills do not have the required RPM’s to achieve optimum results.

3-How can I make my mop bigger and more flexible?You can purchase the parts for a fluffy mop or do the following if you already have a regular mop. Buy an extra long mandrel (see pg. 17) or pick up a ½” x 4-1/2” hardened bolt at your local hardware store and use 10 or more spacers with one package of sanding strips to produce a soft, 3” wide sanding surface for even larger contours. Especially effective with the 6” mop and great for raised panel doors or in-between coat sanding. This form of the Sanding Mop is best being used with only the finer grits, 220g and 320g.

4- What is the difference between a spacer and a stabilizer?First of all, these two products are not meant to be used together. Spacers are small rubber type washers used between the strips of sandpaper to create a softer more pliable mop. Using one spacer after every 4 sheets will produce this effect. The advantage is that you will have a unit that will fit itself around a larger contour. On the other hand, stabilizers are larger white nylon discs. When one disc is mounted on each side of the assembly, a firmer, more aggressive mop is created where only the tips of the little fingers are allowed to sand.

5- How do I break in my mop?In order to prevent your Sanding Mop from being overly aggressive it needs to be broken in. Just hold a piece of scrap wood into your mop while it is spinning for a minimum of 5 minutes. Once the fingers are all separated and the mop begins to soften and become more flexible, you are ready to sand.

6- Will one grit of Sanding Mop sand both hardwood and softwood?Yes, but 120g may take the crisp edge off the profile in softwood and 220g may glaze hardwood. Therefore we recommend using 120g only for sanding hardwoods and 220g for sanding softwoods or in-between coats with the use of spacers.

7- Can I strip paint with the Sanding Mop?The sanding mop works great for stripping paint. What we suggest you do is cover the piece to be stripped with any paint stripper and allow it to dry until it crystalizes (1-2 days). Once the paint stripper is dried, use a sanding mop to sand down the piece. No need to worry about scraping or ruining the detail of your piece. Just let the mop do the work.

8- I have a CNC Router (Carver). What Sanding Mop Kit do I want?For hardwoods you would want to build a 120 grit Fluffy Mop and for softwoods, you would want to build a 180 grit Fluffy Mop.

Quick Tips* The faster you spin your mop the better it will work and the longer it will last. The 6” requires a minimum of 2500RPM and the 4” requires a minimum of

3000RPM.* When using the mop, let the finger tips do the work. If you press or push into the mop it will wear down very quickly.*The Fluffy mop is designed for sanding raised panel doors, carvings, etc. The more spacers added to your mop the less aggressive it will be. Fluffy mops work

best with 180, 220, and 320g, although they can be used with any grit.* Regular Mops are designed for sanding corners, edges and things that require more aggression. We

recommend 120g for hardwood and 220g for softwood.* Before using your mop make sure to break it in by holding it up to a scrap peice of wood for approx.

5 minutes* The Sanding Mop is not a shaper, it is a profile sander that will sand anything with a profile and

leave the detail.* Just like any new tool, play with the sanding mop a little to see which set-up works best for your

application

Watch Video Assembly Instructions Online

19

Item # Rail & Stile/Panel Raiser Profile PriceWL-2019 Roman Ogee/Ogee without undercutter $81.25WL-2019-1 Roman Ogee/Ogee with undercutter 86.25WL-2039 Roundover/Convex without undercutter 81.25WL-2039-1 Roundover/Convex with undercutter 86.25WL-2040 Cove & Bead/Traditional without undercutter 81.25WL-2040-1 Cove & Bead/Traditional with undercutter 86.25WL-2041-1 NEW! 15° Facecut with undercutter 86.25

All 1/2” Shank 3/8” Deep Rail & Stile with 1/4” Tongue and 3-1/4” Panel Raiser

All 1/2” Shank Only Item # Feature price WL-2020 no undercutter $148.75 WL-2020-1 with undercutter 148.75

Bit # Type / Description 1* Raised Panel Bit: Ogee 3-1/4” Cutting Diameter with Undercutter 2 Stile Cutter: Roman Ogee with 1/4” Tongue by 3/8” Deep 3 Cope Cutter: Roman Ogee with 1/4” Tongue by 3/8” Deep 4 Reversible Glue Joint: 1-1/4” Cutting Length by 13/4” CD 5 Drawer Lock: 1/2” CL by 1-3/4” CD 6 Door Lip: European style by 1-1/4” CL

Note: * WL-2020 Raised Panel Bit comes without Undercutter

3 PC CABINET ACCESSORY SETIf you already own one or more of our 3 pc Raised Panel DoorSets, enhance your skills with thisaccessory set. This will turn anyof your 3 pc Raised Panel Setsinto the 6 pc Cabinet Set shown on right.WL-1420-4 1/2” Shank Only $86.25Bit # description1 Drawer Lock: 1/2” CL by 1-3/4” CD2 Reversible Glue Joint: 1-1/4” Cutting Length by 1-3/4” CD3 Door Lip: European style by 1-1/4” CL

Don’t have a ½” RouteR?See page 24 and 28 for a selection of suitable ¼” bits!

WL-1420-4 1/2” Shank Only $111.25 Bit # description1 Lock Miter - 2” Diameter for 1/2” to 7/8” thickness material2 Lock Miter - 2-3/4” Diameter for 5/8” to 11/16” thickness material3 Glue Joint - 1-1/4” Cutting Length by 13/4” Diameter4 Drawer Lock - 1/2” Cutting Length by 13/4” Diameter

ARCh PANEl TEmPlATE SETUse our 10 piece template set for arched raised panels and matching arched rails. Make any door size between 9½” and 22”. Templates are made of rugged HDPE plastic. NOW works with our Panel Master system shown below.

Item # Style Price

WL-APC Cathedral Profile $73.75

WL-APR Roman Profile 73.75

PANEl mASTER ARCh PANEl SYSTEmThis kit includes two metal sure-grip handles with four 1/4”X20 T-bolts and two knobs. Attach to a BlueMax™360 series clamp for a safe and effective small parts handler. When used in conjunction with our arch panel templates (sold above) you will be able to efficiently and safely produce arch panel doors without the bother and mess of double-stick tape. Full instructions are available at www.woodline.com.

WL-5191 Panel Master Arch Panel System $30.00

WL-2019-1 ogee Set

Roman Ogee Rail & StileWL-2019#WL-2020-1

Roundover Rail & StileWL-2039-1 Cutting Profile

Cove & Bead Rail & StileWL-2040-1 Cutting Profiles

Ogee Raised PanelCutting Profiles

Traditional Panel Raiser Cutting Profiles

Convex Panel Raiser Cutting Profile

15 Facecut Rail $ Stile 15 Facecut Panel RaiseWL-2041-1 Cutting Profiles

SAFETy NOTE: All Bits on this page must be used with a variable speed router.

WL-2054

3 PC RAISEd PANEl dOOR SETOur 3-piece cabinet set includes a panel raiser and rail and stile bits. Available in three mix and match designprofiles. All styles with the undercutter produce a true 1/4” tongue automatically.

ORDER FROMSTOCKROOM SuPPLy

4 PC SuPER JOINT SETThe two 45° lock mitersare perfect for producingflawless 90° joints forall of your cabinetry frames and furniturein most sizes of ma-terial, the reversible glue joint for all your edge to edge jointing needs, and the drawer lock to turn your router table into a drawer production factory.

WL-1420-4

WL-2040-1Shaker set

Special Insert

Quality Router Bits

& more

Now available in

Canada

WL-aPC

Cathedral Roman

SAm mAlOOf SIgNATuRE SERIES6 PC CABINET SETElegant and sturdy cabinet doors are within your reach with our fabulous 6-piece complete cabinet door set. you will have everything you need to create raised panel doors for kitchens, bathrooms, grandfather clocks, media centers, and fine furniture projects. This set includes the popular ogee raised panel with 2-piece Roman ogee rail & stile, reversible glue joint to bookmatchand face front panels and drawer lock bitto easily build drawers. Also included is a door lip which adds a finger-pull style profile to the door or drawer edge. WL-2020-1 includes the optional undercutter on the panel raiser to produce a true ¼” tongue without having to worry about the thickness of the material.

WL-2020-1

Router Bit Sets

20

ROuTE-R-JOINT ™PRECISION dOvETAIl JOINERY SYSTEmyou’ve seen on DIy Network how easy it is to make high precision joints for drawers, boxes andfurniture easier that ever before with the new Route-R-Joint™ from Woodline USA. Half blind dovetails, keys and even heart-shaped joints are simple to create using the Route-R-Joint™ system.

Interchangeable guide templates allow switching from dovetails to heart shaped joints in less time than it takes to change a router bit. Amateurs, children and professional woodworkers will enjoy the ease of use, safety and simplicity.

No more complicated setups, no having to re-learn complex setups after a few days out of the shop. Just put in a bit, install the guide bushing, clamp the wood in the jig and PRESTO! Perfect joints every time!

WL-RJ1 Half Blind Dovetail Finger Set $22.50WL-RJ2 Through Dovetail Finger* 11.25WL-RJ3 Heart Finger Set 22.50WL-RJ4 Key Finger Set 22.50WL-RJ5 New Hearts Template 22.50WL-RJ6 Big Keys Template 22.50WL-RJ7 Locks Template 22.50WL-RJ8 New Wave Template 22.50WL-RJ9 Lollipop Template 22.50WL-RJ10 Arrowhead Template 22.50WL-RJ11 Teddy Bear Template 22.50WL-RJ12 Pin & Crescent Template 22.50WL-RJ13 Dog Bones Template 22.50WL-RJ14K 3/4" Dovetail Template Kit** 25.00

Replacement and supplemental templates available:

* use with half blind set ** WL-1305 Dovetail Bit included in Kit

QTy ITEM2 End block1 Position guide block1 Center plate4 T-bolt4 Knob1 Aluminum Angle1 Plywood subplate2 Toggle Clamp Assembly1 .308 Bushing1 5/16" (.3125) Bushing1 7/16" Bushing8 # 8-32 1" flat head screws8 # 8-32 1" nuts8 # 8 lock washer3 # 8 pan head screws2 No-Slip sand paper strip1 Dovetail finger set1 Heart dovetail finger set1 Key dovetail finger set1 3/16" Spiral bit WL-1002S-ES*1 Dovetail bit WL-1303-1**1 Brass bushing centering pin

Kit contains the following:

WL-RJT Route-R-Joint System $229.00

Guide block makes setup easy.

Spiral Bit is included

RJR3, RJR5, RJR7, RJR9

RJR4

RJR6

RJR10

RJR12

RJR13

RJR8

hOw-TO vIdEOSLearn to use your new bits and tools. These tools are the perfect compliment to many of our sets and individual bits Part Title PriceWL-V3 Making Picture Frames 16.00WL-V6 WOW Spacer Fence Video 16.00WL-V7 Route-R-Joint Video 16.00

WL-DVD5Cabinet Making DVD

22.00(includes making arch top doors)

WL-DVD6 WOW Spacer Fence DVD 22.00WL-DVD7 Route-R-Joint DVD 22.00WL-DVD9 Lock Miter, Drawer Lock & Glue Joint 22.00WL-CDM Molding Manual on CD 16.00

INlAY KITThis system comes with a brass inlay template guide with a brass spacing bushing and is de-signed to fit a 13/16” standard size accessory hole. This set comes with our premium 1/8” solid carbide down spiral for the finest quality cutting possible.

WL-INLAy Inlay Kit $25.00

INlAY TEmPlATESSet of basic inlay shapes is made of HDPE and will last for years of pin router or inlay use. Each template is 6” x 6”.

WL-NLT1 Inlay Template Set #1 $25.00WL-NLT2 Inlay Template Set #2 25.00WL-NLT2S Inlay Template Set #2S 25.00

BRASS TEmPlATE guIdE KITIncludes 2 brass lock rings, seven template guides and adapter for those routers that do not have the standard 13/16” hole in the faceplate.

WL-WTS $36.25

wOOdlINE SPACER fENCE SYSTEmThere are numerous jointsthat can be made with the Woodline USA Spacer Fence System. Make box joints with no limitation on the length of the project. Stock can be as thick as 1-1/4”. Great for combina-tion Joints, rabbet, dado, spline dovetails, and even double dovetails. Sliding dovetails are excellent for sturdy drawer glides. Kit includes: 1/4”, 3/8” & 1/2” Spacer Fences, Positive Stop Set Up Block, Dovetail Liner Offset Fence, 5 Piece Set of Brass Measuring Bars, Instructional DVD and booklet. WL-8010 Woodline Spacer Fence System $159.95WL-1003S 1/4” Spiral for 1/4” Box Joints 1/4” Shank $17.50WL-1022S 3/8” Spiral for 3/8” Box Joints 1/2” Shank 43.75WL-1025S 1/2” Spiral for 1/2” Box Joints 1/2” Shank 43.75WL-1312 14° 1/2” Dovetail Bit 1/2” Shank 8.25WL-1314 14° 3/4” Dovetail Bit 1/2” Shank 10.00WOW STD 1 each of the five bits shown above 111.25WL-1003S-1/2 1/4” Spiral for 1/4” Box Joints - 1/2” Shank 31.25WOW 1/2 WOW Std but all w/1/2” Shank 124.00SPIR STD 1 each 1/4” ( 1/4” Shank), 3/8” & 1/2” Spirals 99.00SPIR 1/2 1 ea 1/4”, 3/8” & 1/2” Spirals - all 1/2” Shank 111.00

ulTImATE JOINERY dEluxE COmBO SYSTEmBy popular demand, we’ve packaged our systems to allow you to have both the Route-R-Joint™ and our Spacer Fence systems at a fabulous price. It’s sure to keep you busy for a long time. you get the entire Route-R-Joint™ including an optional template set PLUS the Woodline Spacer Fence Sys-tem on this page! If purchased separately, this system would cost $475! We box it up together and save you $$! WL-COMBO Woodline Combo Joint System $379.00

Fits all Porter Cable® and Black & Decker®, most DeWalt®, ELU®, Freud®, Hitachi® & Skil®

RJR11

Accessories

21

WooDLine uSa 100% Lifetime guaRanteeWe at Woodline USA stand behind our product 100%. If, at any point, you are unhappy with any of our router bits or shaper cutters, including any manufacturing or performance issue, simply call 1-877-287-5017. Our cour-teous staff will send you a replacement as soon a possible. If our technical staff deems it necessary, a return label will be issued for the return of the bit and sent to you along with the replacement at no cost to you.

SETuP BlOCKS fOR CABINET SETSSave time and effort and increase precision with our HDPE setup blocks to adjust the height of the rail & stile, drawer lock or glue joint bits. It couldn’t be easier!Item # Style PriceWL-1338SB 15° Facecut Profile (Shaker) $7.00WL-1360SB Ogee Profile 7.00WL-1361SB Roundover Profile 8.75WL-1362SB Cove & Bead 7.00

9-PC mASTER dAdO SETAre you tired of rattling dadoes with undersized plywood material? This set has been specifically designed to meet all of your dado needs for 1/4”, 1/2”, and 3/4” ma-terials, including bits specifically designed for undersized plywood, standard hardwood and oversized melamine.

Bit description1 15/64” CD by 3/4” CL for 1/4” Undersized Plywood2 1/4” CD by 3/4” CL for 1/4” Standard Hardwood3 9/32” CD by 3/4” CL for 1/4” Melamine4 15/32” CD by 1” CL for 1/2” Undersized Plywood5 1/2” CD by 1” CL for 1/2” Standard Hardwood6 17/32” CD by 1” CL for 1/2” Melamine7 23/32” CD by 1” CL for 3/4” Undersized Plywood8 3/4” CD by 1” CL for 3/4” Standard Hardwood9 25/32” CD by 1” CL for 3/4” Melamine

WL-2030

ROuNdOvER BIT SETSRoundovers create perfectly flush decorative edges perfect for drawer fronts, cabinet edges and small finish moldings.

Bit Dimensions1 1/8” R by 3/4” CD2 3/16” R by 7/8” CD3 1/4” R by 1” CD4 5/16” R by 11/8” CD5 3/8” R by 11/4” CD6 1/2” R by 11/2” CD7* 3/4” R by 2” CD

*Included in WL-2002-7 ONLy

WL-2001

WL-2002-7

WL-2029 1/4” Shank $56.25WL-2030 1/2” Shank $56.25

WL-2001 1/4” Shank 6 pc set $61.25WL-2002-7 1/2” Shank 7 pc set $61.25

4 PC BASIC ROuNdOvER SET

Bit # dimensions1 1/8” R by 3/4” CD2 1/4” R by 1” CD3 3/8” R by 11/4” CD4 1/2” R by 11/2” CD

WL-2024

WL-2024 1/4” Shank $37.50WL-2024-1 1/2” Shank $37.50

6-PC STRAIghT BIT SETThis set has the six most popular sizes of straight bits and is a super value for a beginner woodworker or a veteran looking for a good quality set to replace an old one.

WL-1021-6 1/2” Shank Only $37.50Bit # Description1 1/4” CD by 3/4” CL2 3/8” CD by 1” CL3 1/2” CD by 1” CL4 5/8” CD by 1” CL5 3/4” CD by 1” CL6 1” CD by 1” CL

WL-2021-6

6-PC PATTERN BIT SETBy popular demand, we’ve gathered our pattern bits all in one set. Each features a replaceable top quality shank mounted guide bearing.WL-2032 1/4” & 1/2” Shank $98.75Bit Shank description1 ¼” 3/4” CD by 7/16” CL2 ¼” 5/8” CD by 3/4” CL3 ¼” 1/2” CD by 1” CL4 ½” 3/4” CD by 1” CL5 ½” 11/8” CD by 1” CL6 ½” Dbl Bearing 3/4” CD by 2” CL

WL-2032

ChAmfER BIT SETUse for mitering frames, beveling & decorative edges. Features 2-flute premium carbide precision angle chamfer bits with high performance ball bearing guides. Includes angles to produce 4, 8, 12, and 16 sided frames.

WL-1189-1 1/2” Shank Only $68.75 Bit # Description Sides1 11.25° by 1” CL 162 15° by 1” CL 123 22.5° by 1” CL 84 30° by 1” CL 65 45° by 5/8” CL 4 WL-1189-1

BullNOSE BIT SETEasily produce beautiful staircase moulding, small furniture mould-ing, picture frames, table edges, countertops and much more.

WL-2013 1/2” Shank Only $111.25Bit description1 1/4” Bead Diameter with 11/16” CL2 3/8” Bead Dia. with13/16” CL3 1/2” Bead Diameter with 13/16” CL4 5/8” Bead Diameter with 1” CL5 3/4” Bead Diameter with 11/8” CL6 1” Bead Diameter with 13/8” CL

WL-2013

6-PC fluSh TRIm BIT SETOur popular two-flute and three-flute flush trim bits all in one set. you’ll always have the correct bit length at hand.

WL-1206-6 1/2” Shank Only $73.75Bit # Type description1 2-Flute 1/2” CD by 1” CL2 2-Flute 1/2” CD by 1-1/2” CL3 2-Flute 1/2” CD by 2” CL4 3-Flute 1/2” CD by 1” CL5 3-Flute 1/2” CD by 1-1/2” CL6 3-Flute 1/2” CD by 2” CL

WL-1206-6

6 PC CORNER & EdgE BEAdINgBIT SETProduce a delicate attractive edge in a variety of sizes for jewelry boxes, classic molding, fine furniture, etc,

WL-2023 1/2” Shank Only $98.75 Bit Description1 3/16” Edge Bead Dia. with 5/8” CL2 5/16” Edge Bead Dia. with 3/4” CL3 1/4” Edge Bead Dia. with 5/8” CL4 3/8” Edge Bead Dia. with 3/4” CL5 5/16” Corner Bead Dia. with 3/4” CL6 1/2” Corner Bead Dia. with 11/8” CL

WL-2023

Router Bit Sets

BRASS TEmPlATE guIdE KIT

22

dIvIdEd lIghT SETMake true divided light doors for fine furniture and cabinets. Set includes matching rail &stile and a rabbeting bit forcutting the recess for the glass.

WL-2050 1/2” Shank Only $98.75

PlANTATION ShuTTER SETWith Woodline’s shutter set, everyone can afford custom shutters. Our instructions featured in Handyman and American Router Magazines, including size calculations, are included with each shutter set andcan be found on our website. We’ll even get you started with a free pin and tensioner kit.

WL-2055 1/2” Shank $86.25 Bit # Type : Description1 Beading Bit2 Bullnose Bit3 Dado Bit4 Rabbeting Bit5 Moulding Bit

WL-2055-1 Pin & Tensioner Kit $6.25Pin & Tensioner accessory kit comes with 50 pins and 4 tensioning bushings. The number needed is determined by shutter size and style. Refer to instructions on website at www.woodline.com.

3 PC OffSET TONguE & gROOvE SETComplete your cabinet-making collection with this set that allows you to build incredibly strong face frames. The offset feature allows increased flexibility when needed. See complete instructions at www.woodline.com.

WL-2038 1/2” SHANK ONLy $111.25

WL-2050

WL-2055

WL-2038

1/4” Shank iS ReD1/2” Shank iS BLue

CD = CUTTER DIAMTERCL = CUTTING LENGTH

R = RADIUSD = SHANK DIAMETERSL = SHANK LENGTH

ROuNdNOSE BIT SETAlso referred to as veining or fluting bits, roundnose bits have numerous uses such as fluting surfaces for doors, drawers, panels and almost all furniture projects. Ideal for making children’s toys, sign making and moulding projects, reeding, fluting, veining, grooving, architectural millwork, and engraving.

Bit # Description1 3/8” CD with 1” CL2 1/2” CD with 1-1/4” CL3 3/4” CD with 1-1/4” CL4 1” CD with 1-1/4” CL

5 1-1/2” CD with 3/4” CLWL-2012

WL-2012 1/2” Shank $73.75

5-PC COvE SET

WL-2004 1/4” Shank $48.75

Bit # description1 3/16” R2 1/4” R3 5/16” R4 3/8” R5 1/2” R

WL-2015 1/2” Shank $61.25

Bit # description1 1/4” R 2 3/8” R3 1/2” R4 5/8” R5 3/4” R

WL-2015

Add an attractive edge to furniture, drawers, pictureframe mouldings, and cab-inet doors. Try using them where you would normally use a roundover.

dOvETAIl BIT SETSDovetail joints are versatile and mechanically strong. Dovetail bits are perfect for making strong drawer joints, utility and decorative boxes, fine furniture and more. Woodline has a variety of dovetail sets to meet your needs.WL-2014 1/2” Shank $73.75 Bit # Type : Description1 Dovetail Bit: 8° by 13/16” CD2 Dovetail Bit: 8° by 11/16” CD3 Dovetail Bit: 8° by 1/2” CD4 Dovetail Bit: 10° by 1/2” CD5 Dovetail Bit: 14° by 1/2” CD6 Dovetail Bit: 18° by 1/2” CD7 Dovetail Bit: 8° by 7/16” CD8 Dovetail Bit: 8° by 3/8” CD9 Dovetail Bit: 8° by 5/16” CD10 Dovetail Bit: 8° by 1/4” CD11 Straight Bit: 1/2” CD by 1” CL12 Straight Bit: 7/16” CD by 1-1/4” CL13 Straight Bit: 5/16” CD by 1” CL

WL-2017 1/2” Shank $23.75 Bit # Type : Description1 Dovetail Bit: 14° by 3/4” CD2 Dovetail Bit: 14° by 5/8” CD3 Dovetail Bit: 8° by 1/2” CD4 Dovetail Bit: 14° by 1/2” CD5 Dovetail Bit: 14° by 3/8” CD

Bit # type : description1 Dovetail Bit: 7.5° by 1/4” CD2 Dovetail Bit: 9° by 5/16” CD3 Dovetail Bit: 9° by 3/8” CD4 Dovetail Bit: 14° by 1/2” CD5 Dovetail Bit: 7° by 5/8” CD6 Dovetail Bit: 7° by 3/4” CD7 Straight Bit: 1/4” CD by 3/4” CL8 Straight Bit: 3/8” CD by 1” CL

WL-1711 1/4”&1/2” EXTENDED SHANK $75.00Bit # Type : Description1 Dovetail Bit: 8° by 3/8” CD on 1/4” Shank2 Dovetail Bit: 8° by 1/2” CD on 1/4” Shank3 Dovetail Bit: 8° by 11/16” CD on 1/2” Shank4 Dovetail Bit: 8° by 13/16” CD on 1/2” Shank5 Dovetail Bit: 14° by 3/8” CD on 1/4” Shank6 Dovetail Bit: 14° by 1/2” CD on 1/4” Shank7 Dovetail Bit: 14° by 3/4” CD on 1/2” Shank8 Straight Bit: 5/16” CD by 1” CL,1/4” Shank9 Straight Bit: 7/16” CD by 1” CL, 1/2” Shank10 Straight Bit: 1/2” CD by 1” CL, 1/2” Shank

WL-1712 1/4” Shank $56.25Bit # Type : Description1 Dovetail Bit: 7.5° by 1/4” CD2 Dovetail Bit: 9° by 5/16” CD3 Dovetail Bit: 8° by 3/8” CD4 Dovetail Bit: 9.5° by 3/8” CD5 Dovetail Bit: 8° by 1/2” CD6 Dovetail Bit: 7° by 5/8” CD7 Dovetail Bit: 7° by 3/4” CD

WL-2014

Woodline USA INFOOur bits fit most popular jigs and dovetail fixtures such as the Incra® Jig and the Joint-ech® Jig. If you who need an extended shank for the Leigh® jig, see WL-1711.

WL-2017

WL-1710

WL-1711

WL-1712

WL-1711 With these bits you can make sliding dovetails, half blind dovetails, French dovetails, etc.The 8° dovetails are used for through dovetails while 14° dovetails are com-monly used for half-blind dovetails.

WL-1709 1/4” Shank $65.00WL-1710 1/2” Shank $65.00

Router Bit Sets

23

WL-2000M 1/4” Shank only $73.75

3-PC hORIzONTAl COvE CROwN mOuldINg SETSave time and money and get the look you want by mak-ing your own crown moulding. These bits are great for yourremodeling projects and moulding for grandfather clocks and larger fine furniture pieces.

WL-2094 1/2” SHANK ONLy $73.75 Bit # Description1 7/16” Cutting Length by 1-3/4” Overall Diameter2 3/4” Cutting Length by 2-1/4” Overall Diameter3 3/4” Cutting Length by 2-3/4” Overall Diameter

WL-2045 1/2” SHANK ONLy $73.75

2 PC hANdRAIl SETWith this set you can produce a handrail with ergonomic arched top flowing into an elegantly detailed base.

WL-2046 1/2” SHANK ONLy $73.75

mINIATuRE RAISEd PANEl dOOR SETThe perfect cabinet door set for 1/2” material. Produce the size-appropriate detail needed to add a touch of elegance to smaller projects. Make jewelry boxes,humidors, toolboxes, dollhouses and much more with ease. Includes the 2 pc. Ogee profile rail & stile bits and 2” diameter Ogee panel raiser withundercutter.Shank: 1/2” Diameter OnlyItem # Profile Price

WL-1408-1 Ogee Profile $73.75

WL-2094

WL-2045

WL-2046

WL-1408-1

SAm mAlOOf SIgNATuRE SERIESmASTER mOldINg SETCreate your own custom moulding with this collection of beautiful profiles. Craft detailed quality mouldings to decorate fine furniture and cabinetry as well as architec-tural mouldings. This set includes five beautiful moulding profiles. With a wide selection of cutting lengths and compatible profiles, there’s no end to the combinations you can produce.

WL-2011 1/2” Shank only $123.75

Bit # Type : Description 1 WL-1141: 1-3/4” CL 2 WL-1437: 1-11/16” CL 3 WL-1144: 1-7/8” CL

4WL-1142: 1-1/2” CL, Three 1/4” Beads

5 WL-1439: 1-3/8” CL

8-PC ClASSICAl SETAdd a classic touch to your handcrafted furniture, table edges, mouldings, drawers, picture frames, cabinet doors, and so much more.

WL-2016 1/2” Shank only $123.75 Bit Description1 Roman Ogee Bit: 5/32” Radius Ogee with 1/2” Cutting Length2 Roman Ogee Bit: 1/4” R Ogee with 3/4” CL3 Double Roman Ogee Bit 5/32” Profile Radius with 1/2” CL4 Double Roman Ogee Bit 1/4” Profile R with 3/4” CL5 Classical Ogee Bit: 5/32” Profile R with 1/2” CL6 Classical Ogee Bit: 1/4” Profile R with 3/4” CL7 Ogee with Fillet Bit: 3/16” R Ogee with 1/2” CL8 Classical Wavy Edge Bit: 1/4” Profile R with 7/8” CL

mINIATuRE mOuldINg COllECTIONOur Miniature Collection includes yourfavorite profiles reduced to make them theperfect size for work on smaller sized projects. These bits are great for doll houses, jewelry boxes, tool boxes,humidors, and so much more.

Bit Description1 Cove Bit: 1/8” Radius with 35/64” Overall CD2 Roundover Bit: 1/8” R with 35/64” Overall CD3 Roundover Bit: 1/4” R with 13/16” Overall CD4 Chamfer Bit: 45° by 25/32” Overall CD5 Plunging Roundover with Bead Bit: 1/2” Overall CD6 Plunging Classic Ogee Bit: 1/2” Overall CD7 Roundnose Bit: 1/4” CD by 1/4” CL8 Classical Ogee Bit: 1/8” Profile R by 25/32” Overall CD9 Classical Wavy Edge Bit: 1/8” Profile R by 25/32” Overall CD10 Ogee with Fillet Bit: 1/8” Profile R by 7/8” Overall CD11 Double Roman Ogee Bit: 1/8” Profile R by 25/32” Overall CD12 Roman Ogee Bit: 1/8” Profile R by 25/32” Overall Diameter

PICTuRE fRAmE SETEverything you need to produce beautiful custom frames. Layer the profiles to create hundreds of different designs.

WL-2007 1/4” Shank $93.75WL-2008 1/2” Shank $93.75 Bit # Type : Description1 Palace Molding Bit: 5/16” Bead Diameter and 1-3/8” CD by 1” CL2 Roundover Bit: 3/8” Radius by 1-1/4” Overall CD3 Rabbeting Bit: 1/2” Kerf by 11/4” CD4 Roundnose Bit: 1/2” CD by 11/4” CL5 Double Roman Ogee Bit: 1/4” Profile R by 1-1/2” Overall CD6 Edge Beading Bit: 1/8” Radius Bead by 3/4” Overall CD7 Face Molding Bit: 1-5/8” CL by 11/16” CD8 Cove Bit: 3/8” R by 1-1/4” Overall CD

TABlE EdgE SETUse for tableedges, mouldingssmall raised panels, door anddrawer edges, and fine furniture.WL-1466 1/2” Shank Only $111.25 Bit # description1 Elongated Cove & Bead2 Elongated Wavy Edge3 Elongated Double Roundover4 Elongated Ogee w/Step Cove5 Thumbnail w/Step Cove

WL-2011

WL-1466

WL-2008

Picture frame video available.

See p. A2

WL-2016

WL-2000m

$125 if purchasedseparately

See profiles p. A16

BIRdSmOuTh SETMake 6, 8, 12, and 16-sided projects. you asked for the birdsmouth set in a larger size and here it is. Only one edge of thematerial is cut. The interlocking design of the joint makes the final frame incredibly simple to glue up with no shifting problems. Great for making planters, barrels, columns, birdhouses, chest lids and tapered legs that can be multi-faceted or sanded to a curve. Complete instruc-tions are available at www.woodline.com.

Router Bit Sets

24

Part Cutter DiameterCutting length Price

WL-1001* 1/8” 3/8” $12.75

WL-1001SC* 1/8” 3/8” 15.00

WL-1002** 3/16” 1/2” 8.75

WL-1002-5.5 5.5mm (undersized plywood) 1/2” 8.75

WL-1003 1/4” 1/2” 7.50

WL-1003SC* 1/4” 1” 17.50

WL-1004 5/16” 3/4” 8.75

WL-1005 3/8” 1” 8.75

WL-1005-9.0 9mm (undersized plywood) 1” 10.00

WL-1006 15/32” (undersized plywood) 1” 10.00

WL-1007 1/2” 1” 10.00

WL-1008 9/16” 3/4” 10.00

WL-1009 5/8” 3/4” 11.25

WL-1010 23/32” (undersized plywood) 3/4” 12.75

WL-1011 3/4” 3/4” 12.75

WL-1012 1” 3/4” 15.00

TwO fluTE STRAIghT BITSThese two flute bits are designed with a longer lasting edge featuring solid carbide tips and anti-kickback design. These bits will provide you with smooth cutting performance at some of the best prices around.

Part Cutter Dia. Cut length Price

WL-102015/64” (undersized

plywood) 3/4” $8.75

WL-1021 1/4” 3/4” 8.75

WL-1021SF* 1/4” 1” 8.75

WL-1021-.28 .28” (Melamine) 3/4” 8.75

WL-1019 5/16” 3/4” 8.75

WL-1022 3/8” 1” 8.75

WL-1022-9.09mm (undersized

plywood) 1” 9.35

WL-1023 7/16” 1” 8.75


plywood) 1” 8.75

WL-1025 1/2” 1” 10.00

WL-1025-.53 .53” (Melamine) 1” 10.00

WL-1026 1/2” 1-1/2” 15.00

WL-1026-2-1* 1/2” 2” 20.00

WL-1026-2-2 1/2” 2” 20.00

WL-1026-2-2.5 1/2” 2-1/2” 22.50

WL-1027 5/8” 1” 11.85


plywood) 1” 11.85

WL-1029 3/4” 1’ 13.25

WL-1029-.78 .78” (Melamine) 1” 13.75

WL-1030 3/4” 1-1/2” 13.75

WL-1031 1” 1” 15.00

WL-1032 7/8” 1” 15.00

Straight, Shear or Spiral - which one do I need?

Straight bits are a great multi-purpose bit that come in a wide variety of sizes. If you often work with difficult hardwoods, try a shear bit for a smoother cut. When working in a spot where chip removal and the direction of the chips is a concern, a solid carbide spiral is just what you need. Single flute excels when cutting speed is more important than finish quality.

PartCutter

DiameterCutting Length

Price

WL-1003-1 1/4” 3/4” $10.00

WL-1004-1 5/16” 3/4” 10.00

WL-1005-1 3/8” 3/4” 10.00

WL-1007-1 1/2” 3/4” 11.25

WL-1010-1 23/32” 3/4” 13.75

WL-1011-1 3/4” 3/4” 13.75

STRAIghT BITS wITh ShEAR

The diagonally mounted flutes provide a shear finish with spiral like performance. They work especially well for edge joints and dadoes with difficult hardwoods.

PartCutter

DiameterCutting Length Price

WL-1020-1 15/64” 3/4” $10.00

WL-1021-1 1/4” 3/4” 10.00

WL-1022-1 3/8” 1” 10.00

WL-1024-1 15/32” 3/4” 10.00WL-1025-1 1/2” 13/16” 11.25WL-1026-1 1/2” 1-1/2” 16.25

WL-1027-1 5/8” 1-1/4” 12.50

WL-1028-1 23/32” 1” 12.50

WL-1029-1 3/4” 13/16” 13.75WL-1031-1 1” 1” 15.00

PluNgINgSTRAIghT BITS

These Plunging Straight Bits have a center carbide tooth on the bottom. They are engineered to provide you with good control throughout the cut and a smooth, flat bottom. Plunging bits are great for stopped dadoes, mortising, general groove cutting, and much more.

PartCutter

DiameterCutting Length

Price

WL-1033 3/8” 1” $10.62

WL-1034 1/2” 1” 11.25

WL-1035 3/4” 1” 15.00

PartCutter

DiameterCuttingLength

Price

WL-1036 3/8” 1” $10.60

WL-1037 1/2” 1-1/4” 15.00

WL-1038 3/4” 1-1/4” 16.25

WL-1038-2 3/4” 2” 22.50

Shank: 1/2”Dia. 1-1/2” Length



Shank: 1/4”Dia. 1-1/4” LengthShank: 1/4”Dia. 1-1/4” Length

Shank: 1/2”Dia. 1-1/2” Length* Solid Carbide Cutter **Single Flute Cutter

**Single Flute Cutter

CL

CD

CL

CD

WL-1008

WL-1025

WL-1037

WL-1005-1

WL-1034

Buy the Set & Save!WL-1021-6 Straight Bit Set (Pg. a3)

Get 6 of our most popular 1/2” shank Straight bits packaged in a set.

Straight, Spiral & Trim Bits

25

hINgE mORTISINg BITSThese modified straight bits are specially engineered with wider carbide flutes to ensure a perfectly flat bottom in even the most difficult applications and an enlarged center relief to provide optimum chip clearance. These bits are perfect for demanding stopped dado applications as well as mortising.

Part Cutter Dia. Cut Length Price

WL-1410 1/2” 7/16” $8.75

WL-1411 1/2” 3/4” 10.00

Shank: 1/4” Dia., 1-1/4” Length

PartCutter

Diameter Cutting Length

Price

WL-1415 1/2” 3/4” $10.00


Make Fast Work of Hinges!

Making it easy to order the right bit

All ½” shank bits are labeled in BLUE.All ¼” bits are labeled in RED.

Follow the color-coding to ensure that you won’t order a ½” bit for your ¼” router.

WHy ARE My pLyWooD DADoES RAttLing?

We all know that a 2x4 isn’t really 2” x 4”, and plywood measures the same way. you will need to choose bits that are undersized to compensate for the sanding process of plywood. The correct bit will provide a great fit without any slop. Remember to select an over-size bit if you are using melamine. the lami-nate makes it thicker. Don’t apply this logic when using MDF because MDF measures true (i.e. ½” MDF is ½”).

SOlId CARBIdE SPIRAlS

Up oR DoWn SpiRAL?

Up SpiRALS pull chips toward the shank. they are commonly used for dadoing or mortising with smooth flat bottoms.

DoWn SpiRALDoWn SpiRALS push chips away from the shank. they are commonly used in laminate, veneer or inlay applications and produce a clean finished surface.

These high performance solid carbide spirals are engi-neered to provide you with the finest finish cuts possible. The design allows for rapid chip removal and a chip breaker tip for plunging capabilities.


WL-1001-S 1/8” 1/2” $15.00

WL-1001-SD* 1/8” 1/2” 15.00

WL-1002S-ES** 3/16” 1” 18.75

WL-1002-532S 5/32” 3/4” 17.50

WL-1002-5.5S 5.5mm 3/4” 17.50

WL-1003-S 1/4” 1” 17.50

WL-1003-SD* 1/4” 1” 17.50


WL-1003-S-1/2 1/4” 1-1/4” $31.25

WL-1019-S 5/16” 1-1/4” 43.75

WL-1022-S 3/8” 1-1/4” 43.75

WL-1022-SD* 3/8” 1-1/4” 43.75

WL-1025-S 1/2” 1-1/4” 43.75

WL-1025-SD* 1/2” 1-1/4” 43.75

WL-1025-S2 1/2” 2” 65.00

Shank: 1/2” Dia. 1-1/2” Length

* “D” indicates Down Spiral ** For use with Route-R-Joint (pg. A2) notE: Due to the fragile nature of solid carbide products, these solid carbide spi-rals are not warranted against breakage.


DoWn SpiRAL

WL-1416




2. Chisel corners square as needed.

3. Insert the hinge.

1. Cut the Mortise.

WL-1001S

WL-1002S-eS

WL-1025S

WL-1022SD


26

WL-1296

WL-1195

WL-1194-1

2-fluTE fluSh TRIm BITSA two-flute trim bit allows quicker chip clearance for ap-plications when speedy cutting is called for.

PartCutter Cutting

PriceDiameter length

WL-1200 3/8” 1/2” $10.00

WL-1201 3/8” 1” 10.00

WL-1202 1/2” 1/2” 10.00

WL-1203 1/2” 1” 11.25WL-1204 1/2” 1-13/16” 15.00


PartCutter Cutting


WL-1201-5 3/8” 1” $11.25

WL-1205 1/2” 1/2” 10.60

WL-1206 1/2” 1” 11.80

WL-1207 1/2” 1-1/2” 13.75

WL-1208 1/2” 2” 18.75

WL-1209 3/4” 2” 25.00


fluSh TRIm BITS wITh ShEARThese bits have carbide mounted at an angle for a shear cut to create a smoother surface than a standard two-flute with enhanced chip clearance. Spiral-like perfor-mance at a lower price


WL-1203-1 1/2” 1” $13.75

WL-1194 1/2” 1-3/16” 15.00

WL-1194-1* 1/2” 1-3/16” 15.00

WL-1204-1 1/2” 1-3/16” 20.00


3-fluTE fluSh TRIm BITSThree-Flute Flush Trim Bits are designed to deliver the highest performance cut leaving a smooth finish and eliminating chip out. With premium enclosed ball bearing guides, these bits will meet your trimming needs.

PartCutter Cutting


WL-1210 1/2” 1” $12.50

Shank 1/4” Dia., 1-1/4” Length

PartCutter Cutting


WL-1211 1/2” 1” $12.50

WL-1212 1/2” 1-1/2” 18.75

WL-1212-3* 1/2” 2” 22.50

Shank : 1/2” Dia., 1-1/2” Length


Part Degree Cutting

Pricelength

WL-1215 Flush 1/4” $18.75

WL-1216 22° 1/4” 18.75

WL-1217 45° 1/4” 18.75

WL-1218 7° 1/4” 18.75

WL-1219 15° 1/4” 18.75

WL-1215-4* Flush 1/4” 22.50

PluNgINg PANEl BITS

Cut openings for windows, doors, sinks, etc. The point plunges through your cover-ing material while the collar rides against a stud, electrical box, etc. to guide the flush trim flute to produce a matching opening.

PartCutter Cutting

PriceDiameter Length

WL-1191-1 1/2” 2” $11.25


PartCutter Cutting


WL-1191 1/2” 2” $12.50

Shank: 1/4” Dia., 1¼” Length

PartCutter Cutting


WL-1195 1/2” 1-3/16” $16.25

WL-1195-1* 1/2” 1-3/16” 16.25

WL-1212-1 1/2” 1-1/2” 18.75

WL-1208-1 1/2” 2” 25.00

Shank: 1/2” dia., 1½” Length

* WL-1212-3 with shear

WL-1202

fluTEd lAmINATE TRImmERS Put a flush or beveled edge on laminates. Engineered with a thin trimmer head combined with 3 or 4 flutes and precision bearings, reducing chip out with fragile laminates.

*4 Flutes with Shear

Shank: 1/2” Dia., 1½” Length

Part Degree Cutting

Pricelength

WL-1215-45* Flush 1/4” $22.50

WL-1217-45 45° 1/4” 22.50

*4 Flutes with Shear

fluSh TRIm wITh v-gROOvE

This bit is specifically designed to add an attractive “V” groove or notch to the seam where two boards meet while making the flush cut.

Shank: 1/4” Dia., 1¼” Length

PartCutter V-Notch Cutting

PriceDiameter Diameter length

WL-1295 1/2” 5/8” 1” $16.25

Shank: 1/2” dia., 1¼” Length

PartCutter V-Notch Cutting

PriceDiameter Diameter length

WL-1296 1/2” 5/8” 1” $16.25

WL-1208

WL-1210

WL-1215-4

WL-1217-45

WL-1296Cutting Profile

WL-1191

* Down Shear

Degree

CL

CL

CD

CL

CD

FlushCL

3/4”

CL

CDV-Notch

yES, they’re carbide!


27

dAdO ANd PlANER BITSThese bits are designed specifically for the finishing of rough stock and the leveling of uneven material. Perfect for large dadoes or tenon cutting in applications of heavy-duty shelving and furniture construction. Produces a clean smooth, flat bottom with true sides.

Shank: 1/4” Dia.

Part Degree Cutting Shank Pilot

PriceLength Length Length

WL-1213 Flush 1/4” 1-1/4” 2-1/64” $8.75

WL-1213-1* Flush 5/16” 1-3/4” 7/32” 15.00

WL-1214 7° 1/4" 1-1/4” 2-1/64” 8.75

* Use WL-1213-1 to rabbet cabinet door rail & stile frames for insertion of glass panels.

SOlId CARBIdE lAmINATE TRImmERSThe self piloting tips, high chip clearance, and ease of use provide a quick and clean solution for your general laminate trimming needs.


PartCutter Cutting


WL-1390 3/4” 3/8” $16.25

Shank: 1/2” Dia., 1 -1/4” Length

PartCutter Cutting


WL-1391 3/4” 1/2” $16.25

WL-1392 1” 3/8” 18.75

WL-1393 1-1/4” 5/8” 20.00

WL-1394 1-1/2” 5/8” 21.25

WL-1394-1 2” 5/8” 35.00

WL-1394-2* 1-3/4” 5/8” 45.00 *WL-1394-2 has 5° ease into 1/8” radius for no-ridge results between passes.

BOwl & TRAY BITSAs indicated by the name, these bits are perfect for creating the soft bottom edges for bowls and pockets in serving trays while having the diameters necessary to creatingthe wide edge flutes for cutting boards. Easily make your own drink coasters, plates, and manyother specialty craft items with one bit.

Part Cut Dia RadiusCut

LengthPrice

WL-1380 7/16” 1/8” 1/2” $17.50

WL-1381 3/4” 1/4” 5/8” 20.00

dAdO ClEANERS These versatile bits are designed to plow and clean out dadoes with a true flat bottom and clean edges. The shank mounted bearing can ride against a bar clamp or other guide to allow quick straight cutting every time.

PartCutter Cutting


WL-1007-DS 1/2” 1/8” $17.50

WL-1007-D 1/2” 7/16” 17.50

WL-1009-D 5/8” 7/16” 18.75

WL-1011-D 3/4” 7/16” 20.00


PATTERN BITS wITh ShANK-mOuNTEd BEARINgThe shank-mounted flush guide bearing provides ideal visibility, and premium carbide flutes insure maximum performance for template guided routering.

PartCutter Cutting


WL-1400 1/2” 1” $17.50

WL-1401 5/8” 3/4” 17.50

WL-1402 3/4” 3/4” 17.50


PartCutter Cutting


WL-1405 3/4” 1” $21.25

WL-1405-2 3/4” 1-9/16” 23.75

WL-1405-3 3/4” 2” 28.75

WL-1406 1-1/8” 1” 22.50

WL-1406-2 1-1/8” 2” 35.00

WL-1407* 3/4” 2” 35.00

*Features dual bearings (top & bottom)


PATTERN BIT SELECTIONPattern bits are commonly used with handheld routers to allow better visibility of the template while cutting. When selecting a pattern bit, be sure to keep in mind the complexities of the pattern and the tightest radius in the pattern. Always use the larg-est diameter bit that is compatible with the pattern for the best finish quality and the greatest ease of use. Larger diameter bits also allow for larger bearings which last longer in heavy use applications. Always remember to check the bit clearance below your work so that you don’t accidentally cut into your workbench or other support

structure.



Part Cut Dia RadiusCut

LengthPrice

WL-1385 3/4” 1/4” 5/8” $21.25

WL-1386 1-1/4” 1/4” 5/8” 25.00

WL-1386B* 1-1/4” 1/4” 5/8” 31.25

* Includes shank-mounted bearing for templates

WL-1213

WL-1392

WL-1390

WL-1386

WL-1386-B

WL-1007-D

WL-1407




WL-1406

WL-1400

Buy the Set & Save!WL-2032 Pattern Bit Set (Pg. a3)

Get 6 of our most popular pattern bits packaged in a set.

WL-1214

CL

CD

CL

Pilot Length

R


28

ROuNdOvER BITSWoodline’s roundovers create perfectly flush decorative edges perfect for drawer fronts, cabinet edges and small finish mouldings. Our precision ground carbide will provide smooth quarter round edges guaranteed for a lifetime.

Shank: 1/4” Dia., 1 -1/4” Length

Part Radius Cutting

PriceLength

WL-1040 1/16” 1/2” $13.75

WL-1041 1/8” 5/16” 13.75

WL-1042 3/16” 7/16” 13.75

WL-1043 1/4” 1/2” 13.75

WL-1044 5/16” 1/2” 15.00

WL-1045 3/8” 5/8” 17.50

WL-1046 1/2” 3/4” 20.00

Shank: 1/2” Dia., 1-1/2” LengthPart Radius

Cutting Price

Length

WL-1049 1/8” 3/8” $13.75

WL-1042-5 3/16” 3/8” 15.00

WL-1050 1/4” 1/2” 15.00

WL-1044-5 5/16” 1/2” 15.00

WL-1051 3/8” 5/8” 13.00

WL-1052 1/2” 3/4” 16.25

WL-1053 5/8” 7/8” 22.50

WL-1054 3/4” 1” 25.00

WL-1055 7/8” 1-1/8” 35.00

WL-1056 1” 1-1/4” 37.50

WL-1057 1-1/8” 1-1/2” 43.75

WL-1058 1-1/4” 1-5/8” 45.00

WL-1059 1-1/2” 1-5/8” 60.00

Replacement Bearing - WL-83022 3/16” ID, 1/2” OD

dOuBlE ROuNdOvERS wIThCENTER guIdE BEARINgCenter guide bearing allows you to round over both sides of material in one pass. The eased edge is perfect for stair treads, table edges, shelves, children’s toys, etc.


PartRadius Cutting Opening

PriceLength

WL-1120* 3/16” 21/32-1-3/8” 11/16”-1-15/32” $45.00

WL-1120-1 1/4” 1-3/8” 7/8” 40.00

WL-1120-2 3/8” 1-5/8” 1” 45.00

WL-1120-3 1/2” 1-13/16” 1-3/8” 47.50

Note: *WL-1120 has an adjustable opening and cutting length with included shims.

BEAdINg BITSThis modification of the quarter roundover with a smaller bearing provides a small step on the roundover produc-ing a precise edge perfect for drawer fronts, cabinet edges, and small finish moldings often used by the furniture enthusiast.


Part Radius Cutting

PriceLength

WL-1070 1/16” 1/2” $13.75

WL-1071 1/8” 5/16” 13.75

WL-1072 3/16” 7/16” 13.75

WL-1073 1/4” 1/2” 13.75

WL-1074 5/16” 1/2” 15.00

WL-1075 3/8” 5/8” 17.50

WL-1076 1/2” 3/4” 20.00


Part Radius Cutting

PriceLength

WL-1080 1/8” 1/2” $13.75

WL-1081 1/4” 1/2” 15.00

WL-1082 3/8” 5/8” 16.25

WL-1083 1/2” 3/4” 18.75

WL-1084 5/8” 7/8” 22.50

WL-1085 3/4” 1” 25.00

WL-1086 1” 1-1/4” 37.50

WL-1087 1-1/8” 1-1/2” 43.75

WL-1088 1-1/4” 1-5/8” 45.00

Replacement Bearing - WL83019 3/16”ID, 3/8” OD

PluNgINg ROuNdOvER BITSThese Roundover bits have been specially manufactured with an extended cutting length from the end of the quarter radius providing a 3/8” wide cutting edge at the end. This configuration facilitates plunging into or even through the face of material while creating an attractive roundover profile.

Shank 1/4” Dia., 1-1/4” LengthPart

Radius Dia. Cutting Price

length

WL-1043P 1/4” 3/8” 3/4” $18.75

WL-1045P 3/8” 3/8” 7/8” 20.00

Shank 1/2” Dia., 1-1/2” LengthPart Radius Diameter Cutting Price

Length

WL-1050P 1/4” 3/8” 3/4” $18.75

WL-1051P 3/8” 3/8” 7/8” 20.00

WL-1052P 1/2” 3/8” 15/16” 28.75

WL-1053P 5/8” 3/8” 1” 30.00

WL-1052

WL-1046/WL1052Cutting Profile


WL-1083

WL-1052P Cutting Provile

WL-1045P

WL-1120-2

WL-1120

WL-1051P

CLR

CL R

CLR

RCL

3/8”

R

3/8”

CL

Edge Treatment & Plunging Bits

29

COvE BITSAdd an attractive edge to furniture, drawers, picture frame mouldings, and cabinet doors. Try using them where you would ordinarily use a roundover.

BullNOSE BITSEasily produce beautiful staircase moulding, small furniture mould-ing, picture frames, table edges, countertops, and much more. Bullnose bits come with a fully enclosed guide bearing to allow pattern cutting.

PartBead Cutting

PriceOpening Length

WL-1100 1/4” 1/2” $17.50

WL-1101 3/8” 3/4” 21.25

WL-1102 1/2” 7/8” 22.50

WL-1103 5/8” 1” 23.75

WL-1104 3/4” 1-1/8” 28.75


PartBead Cutting

PriceOpening Length

WL-1110 1/4” 5/8” $17.50

WL-1111 3/8” 13/16” 21.25

WL-1112 1/2” 3/4” 22.50

WL-1113 5/8” 7/8” 23.75

WL-1114 3/4” 1-3/16” 28.75

WL-1115 1” 1-3/8” 33.75

WL-1116 1-1/8” 1-1/2”” 35.00

WL-1117 1-1/4” 1-11/16” 37.50

WL-1118 1-1/2” 1-7/8” 42.50

fINgERNAIl BITSFingernail bits, also known as half radius bullnose bits, are used often to soften hard edges on tables, countertops, stairs, and in almost all applications were you could use a full radius Bullnose. These bits produce a very nice edge when the bead opening is smaller than the material thickness.


PartBead Cutting

PriceOpening Length

WL-1090 3/8” 5/8” $15.00

WL-1091 1/2” 3/4” 17.50

WL-1092 3/4” 1’ 21.25


PartBead Cutting

PriceOpening Length

WL-1095 3/8” 5/8” $15.00

WL-1096 1/2” 13/16” 17.50

WL-1097 3/4” 1” 21.25

WL-1098 1” 1-3/8” 23.75


Part RadCutter Cut

PriceDia length

WL-1161-1 1/4” 1-1/8” 9/16” $20.00

WL-1162-1 3/8” 1-3/8” 5/8” 21.25


Part Rad Cutter Cut Price

Dia length

WL-1170-1 1/4” 1-1/8” 9/16” $20.00

WL-1171-1 3/8” 1-3/8” 5/8” 21.25

WL-1172-1 1/2” 1-5/8” 13/16” 25.00

STEPPEd COvE BITSThese Cove Bits have been engineered with a step on both ends of the cove radius produc-ing a unique profile for furniture and cabinet edges. Use instead of a standard cove bit for a more pronounced eye-catching profile.

Part Radius Cutting

Price:ength

WL-1159 1/8” 3/8” $15.00

WL-1160 3/16” 5/16” 15.00

WL-1161 1/4” 1/2” 16.25

WL-1162 3/8” 1/2” 18.75

WL-1163 1/2” 5/8” 20.00


Part Radius Cutting

PriceLength

WL-1169 1/8” 1/2” $13.75

WL-1170 1/4” 1/2” 16.25

WL-1171 3/8” 1/2” 18.75

WL-1172 1/2” 5/8” 20.00

WL-1173 5/8” 3/4” 27.50

WL-1174 3/4” 7/8” 30.00

WL-1112WL-1112 Cutting Profile

WOODLINE NOTE Create other unique finishes by selecting a Bullnose that is either smaller or larger than your material.

WL-1101/WL-1111 Profile Options

100% Lifetime GuaranteeWe at Stockroom Supply Canada stand behind our product 100%. If, at any point, you are unhappy with any of Woodline’s router bits or shaper cutters, including any manufacturing or performance issue, simply call 1-877-287-5017. Our courteous staff will send you a replacement as soon a possible. If our technical staff deems it necessary, a return label will be issued for the return of the bit and sent to you along with the replacement at no cost to you.

WL-1163

WL-1163/WL-1172Cutting Profile

WL-1096


WL-1172-1


CL

BeadOpening





WL-1172

CL

CL

CL

R



30

ROuNdNOSE/CORE BOx BITSThese bits are also commonly referred to as veining or fluting bits and have numerous uses such as reeding, fluting, veining, grooving, architectural millwork, engraving, fluting surfaces for doors, drawers, panels, making children’s toys, sign making and moulding foralmost all of your furniture projects. Cutter radius is 1/2 of cutter diameter.


PartCutter Cutting

Pricediameter length

WL-1370* 1/8” 5/16” $12.50

WL-1371 1/4” 11/32” 23.75

WL-1371-1 3/8” 7/16” 12.50

WL-1372-1 5/8” 5/8” 13.75

WL-1372 1/2” 9/16” 13.75

WL-1487** 1/2” 1/2” 16.25

WL-1373 3/4” 7/16” 17.50 *WL-1370 Is a solid carbide bit **WL-1487 has a shank-mounted bearing

Shank: 1/2” dia., 1-1/2” Length

PartCutter Cutting


WL-1375 1/4” 5/8” $11.25

WL-1375-1 3/8” 1” 15.00

WL-1376 1/2” 1-1/4” 16.25

WL-1377 3/4” 1-1/4” 18.75

WL-1378 1” 1-1/4” 18.75

WL-1378-1 1-1/2” 3/4” 27.50

Shank 1/2” Dia. Only

Part TypeDiameter Cutting Bit Shank

Priceof Detail length Dia. Length

WL-1480 3-Full Flute 1/4” 1-1/8” 3/4” 1-1/2” $32.50

WL-1481 3-Full Bead 1/4” 1-1/8” 3/4” 1-1/2” 32.50

WL-1480A Both Bits above 1/4” 1-1/8” 3/4” 1-1/2” 50.00

WL-1490 2-Full Bead & 1/4” 3/4” 1” 1-3/8” 40.00

2-Partial Bead

WL-1369 2-Partial Bead 3/16” 1/2” 1-1/8” 1” 27.50

WL-1142 3-Full Bead & 1/4” 1-1/2” 7/8” 1-1/2” 41.25

2-Partial Bead

Shank:1/4” Dia.,1-1/4” Length

PartBead

PriceDiameter

WL-1470 1/4” $21.25

WL-1471 3/8” 23.75

WL-1472 1/2” 26.25


PartBead

PriceDiameter

WL-1474 1/2” $26.25

WL-1475 3/4” 28.25

WL-1476 1” 32.50

WL-1477 1-1/2” 37.50

mulTIPlE fluTINg & BEAdINg BITSClassic edge treatment that creates multiple beads or flutes in a single pass, decorative edge and face detail in crown molding, furni-ture, picture frames, and many common household trims.

NOTE Multiple Fluting &

Beading BitsFor a unique finish, try combining both the multi flute and the multi bead finish in an alternating pattern.

fluTINg BITSFor fluting applications with a hand router. Features a horizontal cutting surface (perpendicular to the shank) with top and bottom high performance guide bearings. May be used as a pattern cutting bit.

hORIzONTAl BEAdINg BITS/POINT CuTTINg ROuNdOvERSPerfect for lettering and sign making, turning legs, enhancing cabinetry design, and general surface design.


Part RadiusCutter

Pricedia

WL-1317-1 1/8” 1/4” $15.00

WL-1317 1/4” 1/2” 15.00

WL-1318 3/8” 3/4” 20.00


Part RadiusCutter

Pricedia

WL-1318-1 5/8” 1-5/16” $21.25

WOODLINE NOTE To do template cutting, try the WL-1487. With its flush shank-mounted bear-ing, this roundnose bit can be used to create false panels or even create fluted columns.

NOTE horizontal Beading Bits/Point Cutting

RoundoversCreate beautiful 2-partial beads with a selection of radii. With multiple passes, you can create fantastic full beads without the material thickness limitations of standard bead-ing bits.

WL-1318

WL-1318-1

WL-1318 Cutting Profile

WL-1480 and WL-1481Cutting Profiles

WL-1481WL-1480

WL-1490

WL-1376

WL-1372


WL-1476

WL-1471




WL-1480a includes bothbits shown!


CL

CL

CD

CD

R

R

CD

CL

Diameter ofDetail

BeadDiameter


31

PartCutter Cutting Cutting Sides of

PriceDia Angle Length Frame

WL-1180 3/4” 15° 1/2” 12 $16.25

WL-1181 3/4” 25° 1/2” NA 16.25

WL-1179 7/8” 11-1/4° 7/8” 16 18.75

WL-1182 1-1/8” 45° 1/2” 4 17.50

WL-1187-1 1-1/4” 22-1/2° 7/8” 8 17.50

WL-1183 1-5/8” 45° 5/8” 4 18.75

CORNER & EdgE BEAd-INg BITSProduce a delicate attractive edge in a vari-ety of sizes. Great for jewelry boxes, classic moulding, fine furniture, etc.

Shank:1/4” dia., 1-1/4” Length

Part TypeBead Bead Cutting Cutting

PriceDia Radius length Dia

WL-1460 1-Full Bead 3/16” 3/32” 5/8” 11/16” $18.75

WL-1461 1-Full Bead 5/16” 5/32” 11/16” 13/16” 20.00

WL-1462 1-Full Bead 1/4” 1/8” 5/8” 3/4” 20.00

WL-1463 1-Full Bead & 5/16” 5/32” 13/16” 3/4” 20.00

1-Partial Bead


Part TypeBead Bead Cutting Cutting

PriceDia Radius length Dia

WL-1464 1-Full Bead & 5/16” 5/32” 7/8” 13/16” $20.001-Partial Bead

WL-1465 1-Full Bead & 1/2” 1/4” 1-1/8” 1” 26.25

1-Partial Bead

“v” gROOvE BITSUseful for sign carving, lettering, grooving, and detailing projects. These plunging cutters come in both 60° and 90° angles and a variety of diameters.

Shank: 1/4” Dia., 1-1/4” LengthPart Angle cutter Cutting Price

dia. length

WL-1316 60° 1/2” 11/16” $13.75

WL-1319 60° 3/4” 13/16” 18.75

WL-1319 -1* 60° 5/8” 1/2” 22.50

WL-1320 90° 1/4” 5/16” 10.60

WL-1321 90° 3/8” 1/2” 10.60

WL-1322 90° 1/2” 1/2” 11.25

WL-1485** 90° 1/2” 1/2” 27.50

*WL 1319-1 has 3 flutes** WL-1485 features a shank mounted bearing for template use.

Shank: 1/2” dia., 1-1/2” Length

Part AngleCutter Cutting

PriceDia. Length

WL-1325 90° 5/8” 1/2” $15.00

WL-1326 90° 3/4” 5/8” 17.50

WL-1327 90° 1” 3/4” 22.50

WL-1328-1 90° 1-1/4” 1” 25.00

WL-1328 90° 1-1/2” 1-1/4” 32.50

NOTE “V” Groove Bits

The bit angle is measured from the cutting surface to the point plane in line with the shank. A 90° bit consists of two 45° cutting surfaces while a 60° consists of two 30° cutting surfaces.

ChAmfER BITSWhile these bits were initially designed for mitering frames, they are commonly used for beveling and simple decorative edges.



PartCutter Cutting Cutting Sides of

PriceDia Angle Length Frame

WL-1185 7/8” 11-1/4° 7/8” 16 $18.75

WL-1186 1” 15° 7/8” 12 20.00

WL-1187 1-1/4” 22-1/2° 7/8” 8 21.25

WL-1188 1-1/2” 30° 7/8” 6 22.50

WL-1189 1-5/8” 45° 5/8” 4 23.75

WL-1190 2-9/16” 45° 1-1/4” 4 36.25

PluNgINg BAll BITS

Plunging ball cutters allow you to create flutes by allowing you to plunge from an edge or into the face of the material. Larger diameter plunging ball cutters work very well to create simple unique drawer pulls. These can also be used to create captive rod sup-ports for drawer slides and closet organiza-tion systems.

Shank: 1/2” Dia.only, 1-1/2”Length

Part RadiusCutter

Pricediameter

WL-1379-1 3/16” 3/8” $16.25

WL-1379-2 1/4” 1/2” 17.50

WL-1379-3 3/8” 3/4” 20.00

WL-1379-4 1/2” 1” 26.25

NOTE CHAMFER BITS

The angle of the chamfer defines the number of sides in the frame, for instance a 45° chamfer will create a square or four sided frame while a 15° chamfer is used to create a 12 sided frame.




WL-1379-1Cutting Profiles

WL-1182/WL-1189Cutting ProfilesWL-1462 Cutting Profile

WL-1461

WL-1182

WL-1316

WL-1464

WL-1185

WL-1326WL-1379-3



32

EdgE dETAIl BITSUseful for table edges, mouldings, drawers, picture frames, cabinet doors, and much more.

OgEE

Part RadiusCutter Cutting

PriceDia Length

WL-1261 3/16” 1-1/4” 5/8” $23.75




PriceDia Length

WL-1261-1 3/16” 1-1/4” 5/8” $23.75

WL-1262 1/4” 1-5/8” 7/8” $27.50



WL-1230 5/32” 1” 1/2” $20.00

WL-1231 1/4” 1-3/8” 3/4” $22.50




WL-1235 5/32” 1” 1/2” $20.00

WL-1236 1/4” 1-3/8” 3/4” $22.50

Shank: 1/2” Dia., 1-1/2”Length


PriceDia Length

WL-1265 3/16” 1-3/8” 9/16” $26.25


PriceDia Length

WL-1260 3/16” 1-3/8” 9/16” $26.25






WL-1240 5/32” 1-1/8” 1/2” $26.25

WL-1241 1/4” 1-1/2” 3/4” $28.25

Shank:1/2” Dia., 1-1/2” Length



WL-1245 5/32” 1-1/8” 1/2” $26.25

WL-1246 1/4” 1-1/2” 3/4” $28.25


Pricedia length

WL-1252 5/32” 1-1/8” 1/2” $25.00

WL-1253 1/4” 1-1/2” 11/16” 27.50


PriceDia Length

WL-1250 5/32” 1-1/8” 1/2” $25.00

WL-1251 1/4” 1-1/2” 11/16” $27.50

Shank: 1/2”Dia., 1-1/2” Length


fRENCh PROvINCIAlCOvE & BEAd


PartCove Bead Cutter Cutting

PriceRadius Radius Dia Length

WL-1268 1/8” 3/8” 1-1/2” 5/8” $27.50

Shank: 1/2” Dia., 1-1/2” LengthPart

Cove Bead Cutter CuttingPrice

Radius Radius Dia LengthWL-1254 3/16” 3/16” 1-1/8” 1/2” $22.50

WL-1269 1/8” 3/8” 1-1/2” 5/8” $27.50

ClASSICAl wAvY EdgE

PartCutting Cutter

RadiusCutting

PriceDepth Dia length

WL-1238 1/2” 1-1/2” 5/32” 3/4” $28.75

WL-1255 9/16” 1-7/8” 5/32” 7/8” $30.00

Shank: 1/2” Dia. only, 1-1/2” Length

dOuBlE ROmAN OgEE

OgEE wITh fIllET

WL-1241

WL-1260

ROmAN OgEE

WL-1262

WL-1235

ClASSICAl OgEE

WL-1268 WL-1254

WL-1255

WL-1253

WL-1268 Cutting Profile WL-1254 Cutting Profile



CL

CD

CuttingLength

CuttingDepth






33

ClASSIC dOuBlE ROuNdOvER



WL-1258 5/32” 1-1/8” 1/2” $26.25

WL-1259 1/4” 1-1/2” 11/16” $28.75

TRIPlE ROuNdOvER



WL-1256 3/16” 1-5/8” 3/4” $30.00

Shank: 1/2” Dia only, 1-1/2” Length

ClASSIC COvE & BEAd

PluNgINg BITS plunging bits are commonly used alone or in com-bination to produce faux raised panel doors. By plunging into MDF or plywood at an equal distance from the edge of a flat door, a profile is created to resemble a rail and stile with a raised panel insert. Use this technique to give personality to all types of utility cabinets or painted doors in a kitchen or bath.

TEChTIP

PluNgINg dECORATIvE BITSPlunging decorative edges work well for creating decora-tive designs in the face of drawers, doors, jewelry boxes, cabinetry, frames, and adding detail to your fine furniture projects. Make great mouldings for your projects or small false raised panels doors in MDF applications.


PriceDia Length

WL-1383 1/8” 3/4” 7/16” $16.25

WL-1384 3/16” 1-1/4” 1/2” $21.25


PriceDia Length

WL-1395 1/8”” 3/4” 7/16” $16.25

WL-1396 3/16” 1-1/4” 1/2” $21.25


Shank: 1/2” Dia.Part Radius

Cutter Cutting ShankPrice

Diameter Length Length

WL-1263 1/4” 1-1/8” 5/8” 1-1/2” $21.25

WL-1486* 1-1/4” 1-3/8” 5/8” 1-1/8” $37.50*WL-1486 features a sloping (varying radius) bead and a shank-mounted flush bearing for template guided cutting.

Shank: 1/4” dia. only, 1¼” Length


PriceDia Length

WL-1270 3/16” 5/8” 1/2” $17.50

WL-1271 5/16” 7/8” 5/8” $18.75

WL-1272 7/16” 1-3/16” 3/4” $22.50

ClASSIC BEAdINg


Pricedia length

WL-1266 5/64” 1/2” 3/8” $18.75

WL-1267-1 5/32” 3/4” 7/16” $18.75


PriceDia Length

WL-1267 5/32” 3/4” 7/16” $18.75

Shank:1/2” Dia., 1-1/2” Length

dOuBlE ROmAN OgEE



WL-1273 1/4” 1-5/16” 5/8” $27.50

PluNgINg OgEE


ROuNdOvER wITh BOTTOm BEAd


Shank: 1/2” dia., 1½” Length

Shank: 1/2” Dia. only, 1-1/2” Length WL-1259

WL-1256

WL-1263 WL-

1486

WL-1396

WL-1273

WL-1266

WL-1270








34

Shank: 1/2” Dia. only, 1-1/2” Length

EdgE dETAIl BITSGreat for table edges, mouldings, small raised panels, door and drawer edges, and fine furniture. Layer different profiles with multiple passes.

Part Profile Reveal Dia. Length Price

WL-1274 Ogee w/Stepped Cove 1-5/16” 3” 1-5/8” $55.00

WL-1274-1 Ogee w/Stepped Cove 3/4” 2” 7/8” 41.25

WL-1275 Dbl Sided Classic Ogee 5/16” 1-1/8” 1” 35.00

WL-1276 Dbl Sided Triple Rndover 1/2” 1-1/2” 1-1/4” 35.00

WL-1436 Thumbnail w/ Bead 1” 2-1/2” 3/4” 43.75

WL-1438 Elong Ogee w/Step Bead 1” 2-1/2” 13/16” 45.00

WL-1445 Thumbnail 1-1/8” 2-3/4” 7/8” 47.50

WL-1446 Elongated Roman Ogee 7/8” 2-1/4” 3/4” 40.00

WL-1447 Shallow Ogee w/Step Bead 3/4” 2” 1” 42.50

WL-1448 Dbl Rom Ogee w/Step Cove 3/4” 2” 15/16” 40.00

WL-1449 Classic Ogee 3/4” 2” 1-1/16” 40.00

WL-1455 Oval Bead w/Fillet 15/32” 1-7/16” 1” 37.25

WL-1466-1 Elong Cove & Bead 3/4” 2” 1/2” 31.25

WL-1466-2 Elong Wavy Edge 3/4” 2” 11/16” 31.25

WL-1466-3 Elong Dbl Roundover 3/4” 2” 1/2” 31.25

WL-1466-4 Elong Ogee w/Step Cove 3/4” 2” 5/8” 31.25

WL-1466-5 Thumbnail w/Step Cove 7/8” 2-1/4” 11/16” 31.25




WL-1274-1 WL-1436 WL-1438 WL-1445

WL-1446 WL-1447 WL-1448 WL-1449

WL-1466-1 WL-1466-2 WL-1466-3 WL-1466-4

WL-1466-5

WL-1455

WL-1276

WL-1274

WL-1275

Buy the Set & Save!WL-1466 table edge Set

Get 5 of our most popular table edges packaged in a set. (See pg. A5)


35

mOuldINgSWith a wide selection of cut-ting lengths and compatible profiles, you can use multiple bits to create custom mould-ings.

PartCutter Cutting

PriceDia. Length

WL-1140 1-3/8” 1-1/2” $41.25

WL-1141 1-3/8” 1-3/4” 52.50

WL-1142 7/8” 1-1/2” 41.25

WL-1143 1-17/64” 1-3/8” 41.25

WL-1144 1-1/2” 1-15/16” 52.50

WL-1439 1” 1-3/8” 38.75

WL-1439-1 3/4” 1-1/16” 32.50

WL-1440 1” 1-3/8” 38.75

WL-1440-1 7/8” 1” 32.50

WL-1441 1-1/16” 1-5/8” 38.75

WL-1441-1 7/8” 1” 32.50

WL-1442 1-3/4” 1-1/8” 38.75

WL-1442-1 1-1/2” 7/8” 32.50

WL-1443* 1-1/4” 3/4” 32.50

WL-1444* 1-1/4” 7/8” 32.50

WL-1445-1 1-3/8” 1-1/2” 43.75

WL-1458 2” 1-5/8” 50.00

WL-1458-1 1-1/2” 1-5/16” 37.50

WL-1459 1-3/4” 1-3/8” 40.00* WL-1443 and WL-1444 do not have bearing guides

ClASSIC ASTRAgAlAstragal mouldings are common in older homes and classic furniture, including window sills, table edges, counters, picture frames and chair rails.

ClASSIC PAlACEThis classic molding profile has a stepped cove and full radius bead.

PartBead Cutter Cutting Price

Diameter Diameter Length

WL-1226 1/4” 1-1/8” 3/4” $23.75

WL-1227 5/16” 1-3/8” 1” 28.75

WL-1228 3/8” 1-5/8” 1-5/16” 31.25

WL-1228-1 7/16” 1-5/8” 1-5/16” 33.75

Shank: 1/2” dia. only, 1½” Length



Price Dia Length

WL-1426-1 1/4” 1” 3/4” $35.00

WL-1426 1/4” 1-1/8” 1” 37.50

WL-1427 5/16” 1-1/4” 1-3/16” 38.70

WL-1428 3/8” 1-3/8” 1-1/2” 46.25




R = RADIUSD = SHANK DIAMETERSL = SHANK LENGTHWL-1227 Cutting Profile


WL-1142

WL-1441

WL-1144

WL-1143

WL-1445-1WL-1140

WL-1141

WL-1439

WL-1440

WL-1427

WL-1442-1

WL-1443

WL-1444

WL-1458-1

WL-1459

WL-1227

WL-1445-1Cutting Profile

HANDRAIL

Moulding Bits

36

mulTI-PROfIlE CuTTERWith this single bit you can produce an almost un-limited array of beautiful large and small mould-ings quickly and easily.

PartCutter Cutting Cutting

PriceDiameter Length Depth

WL-1422 2-1/4” 1-15/16” 7/8” $56.25

WOODLINE NOTE MULTI-PROFILE CUTTER

Create more than 40 different pro-files simply by adjusting the height of the bit, the depth of the fence on the router table and flipping or rotating stock.

fACE mOuldINgFace moulding bits feature a sym-metrical shape and serve as great universal moulding bits. Easily produce chair rails, crown mould-ing, base cap and picture frame mouldings with a single pass. Fully-enclosed ball bearing guides make it easy to combine this pro-file with other moulding cutters.

Part CD CL Price

WL-1457-1 11/16” 7/8” $32.50

Part CD CL Price

WL-1457 7/8” 1-7/8” $42.50

Shank:1/2” Dia. 1-1/2” Length

PartCutter Cutting


WL-1456 1-3/8” 1-13/16” $40.00

WL-1456-1 1-1/2” 2-1/4” 47.50

WL-1456-2 1-1/4” 2-1/4” 47.50

WL-1456-3 1-1/4” 2-1/4” 47.50

BRICK mOuldINgUseful for many architectural and furniture projects

Part Cutter Dia Cutting Length Price

WL-1467 1” 2-5/32” $40.00

CASE/BASE mOuldINgCase moulding bits deliver the quality smooth finish needed to produce beautiful casings and base moulding for architectural and furniture projects. (Use multiple passes in hard woods for optimum results.)

PartProfile Cutter Carbide Moulding

Pricestyle Diameter Height Height

WL-1433 Ranch 1-3/8” 1-5/8” 2-1/4” $47.50

WL-1434 Colonial 1-3/8” 1-7/8” 2-1/4” 47.50

WL-1437 Elongated 1” 1-11/16” 2-1/4” 40.00

Ogee with Bead



CROwN mOuldINgSave time and money and get the look you want by making your own crown moulding. These bits are great for all your remodeling projects and moulding for grandfather clocks or larger fine furniture pieces. (Use multiple passes in hard-woods for optimum results.)




WL-1422

WL-1456

WL-1433Ranch

WL-1467

WL-1457

WL-1222 Two of the many Cutting Profiles

WL-1434Colonial

WL-1437ogee w/BeadWL-1456-1 WL-1456-2 WL-1456-3

Moulding Bits

37

RABBETINg BITS/SlOT CuTTERSOur industrial strength carbide rabbeting bits give you fast, accurate, and simple results the first time with no tear out on the entry cuts and perfect flush milled surfaces. Use for rabbeting, slot cutting and general joinery.

PartCutting Kerf Cutting

PriceDepth Thickness Diameter

WL-1220 3/8” 1/2” 1-1/4” $17.50

WL-1220-1 1/4” to 1/2” 1/2” 1-1/2” 25.00

Depth with 4 Bearings: (1/4”, 3/8”, 7/16”, & 1/2”) & Allen Wrench

WL-1220-2 3/8” 1/16” 1-1/4” 16.25

WL-1220-3 3/8” 1/8” 1-1/4” 16.25

WL-1332-1 3/8” to 1/2” 5/32” 1-3/8” 20.00with 3 bearings (for biscuits) & Allen Wrench

WL-1220-4 3/8” 1/4” 1-1/4” 16.25

WL-1335-1 1/4” to 1/2” 1/4” 1-1/2” 20.00Depth with 4 Bearings: (1/4”, 3/8”, 7/16”, & 1/2”) & Allen Wrench

WL-1220-5 3/8” 3/8” 1-1/4” 16.25

WL-1220-7 1/4” to 1/2” 1/2” 1-1/2” 31.25Depth with 6 Bearings: (1/8”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2”)


PartCutting Kerf Cutting

PriceDepth Thickness Diameter

WL-1225 3/8” 1/2” 1-1/4” $17.50

WL-1225-1 1/4” to 1/2” 1/2” 1-1/2” 25.00Depth with 4 Bearings: (1/4”, 3/8”, 7/16” & 1/2”) & Allen Wrench

WL-1225-2 3/8” 1/16” 1-1/4” 16.25

WL-1225-3 3/8” 1/8” 1-1/4” 16.25

WL-1342-1 3/8” to 1/2” 5/32” 1-1/2” 20.00with 3 bearings (for biscuits) & Allen Wrench

WL-1225-4 3/8” 1/4” 1-1/4” 16.25

WL-1345-3 1/4” to 1/2” 1/4” 1-1/2” 20.00Depth with 4 Bearings: (1/4”, 3/8”, 7/16”, & 1/2”) & Allen Wrench

WL-1225-5 3/8” 3/8” 1-1/4” 16.25

WL-1225-6 3/8” 3/4” 1-1/4” 22.50

WL-1225-7 1/4” to 1/2” 1/2” 1-1/2” 31.25

Depth with 6 Bearings: (1/8”, 1/4”, 5/16”, 3/8”, 7/16” & 1/2”)

DEPTH OF CuT ANDBEARING SELECTION

Selection of the correct bearing for a perfect rabbet cut can be tricky! the formulas below will help you determine the exact bearing size for any type of bit.

(D) Diameter of Cutter = outer diameter of the cutter.(BoD) Bearing oD = outer diameter of the guide bearing.Bearing ID = Inner diameter of guide bearing (to fit the bit).(CD) Cut depth = result of cutting using the guide bearing against the material with the cutter.Kerf = depth of cut (changed by height of router or shaper).

Use one of the formulas below to calculate the bearing, cut-ter diameter or cut depth you need.

BoD = D-(2*CD) Ex.: ½” bearing = 1” cutter-(2* ¼” cut depth)CD = (D-BoD)/2 ¼” cut depth = (1” cutter-1/2” bearing)/2D = (2*CD)+BoD 1” Cutter = (2* ¼” cut depth)+ ½” bearing

When ordering bits be sure and specify the iD and the oD to assure you get the right bearing. if possible provide the Woodline bit part number you are using the bearing on.

Ex.: 5/8” bearing with 3/16” ID to fit a WL 1225-1.

4-wINg SlOT CuTTERSThese slot cutters will give clean entry cuts with-out kickback while producing true square slots with a clean flush bottom finish. All have a half inch depth of cut and come in a wide selection of kerf thicknesses.

Part KERFCutting Cutting

PriceDia. Depth

WL-1330 1/16” 1-7/8” 1/2” $20.00 WL-1330-564 5/64” 1-7/8” 1/2” 20.00

WL-1331 1/8” 1-7/8” 1/2” 20.00

WL-1332* 5/32” 1-7/8” 1/2” 20.00

WL-1333 3/16” 1-7/8” 1/2” 20.00 WL-1334 15/64” 1-7/8” 1/2” 20.00 WL-1335 1/4” 1-7/8” 1/2” 20.00


Part KERFCutting Cutting

PriceDia. Depth

WL-1340 1/16” 1-7/8” 1/2” $20.00

WL-1341 1/8” 1-7/8” 1/2” 20.00

WL-1342* 5/32” 1-7/8” 1/2” 20.00

WL-1343 3/16” 1-7/8” 1/2” 20.00

WL-1344 15/64” 1-7/8” 1/2” 20.00

WL-1345 1/4” 1-7/8” 1/2” 20.00

WL-1345-1 3/8” 1-7/8” 1/2” 22.50

WL-1345-2 1/2” 1-7/8” 1/2” 22.50

Shank:1/4” dia., 1-1/4” Length


TEChTIP

WL-1225-1

WL-1220-1 WL-1220-3

WL-1225-4



R = RADIUSD = SHANK DIAMETERSL = SHANK LENGTHWL-1341 Cutting Profile

*WL-1332 & WL-1342 work with#10 Biscuits

WL-1335

WL-1345

On WL-1220-1,Cutting Depth changes

with size of bearing

KerfThickness

CuttingDepth

On WL-1225-1,Cutting Depth changes

with size of bearing

one of our most popular bits!

CuttingDepthKerf Thickness

Rabbet / Slot Bits

PartProfile Cutter Carbide Moulding

Pricestyle Diameter Height Height

WL-1433 Ranch 1-3/8” 1-5/8” 2-1/4” $47.50

WL-1434 Colonial 1-3/8” 1-7/8” 2-1/4” 47.50

WL-1437 Elongated 1” 1-11/16” 2-1/4” 40.00

Ogee with Bead

38

dOvETAIl BITSDovetail joints are incredibly versatile and mechanically strong. Make sliding dove-tails, half blind dovetails, French dovetails, etc. Dove-tails are perfect for making strong drawer joints, utility and decorative boxes, fine furniture, and much more.

Shank: 1/4” dia., Varying shank length

PartCutting Dovetail Cutting Shank

PriceAngle Width Length Length

WL-1300 7-1/2° 1/4” 5/16” 1-1/4” 8.10

WL-1301 8° 3/8” 3/8” 1-1/4” 8.10

WL-1302 14° 3/8” 3/8” 1-1/4” 8.10

WL-1303 14° 1/2” 1/2” 1-1/4” 8.10

WL-1303-1* 14° 1/2” 1/2” 1-3/4” 8.75

WL-1304 14° 3/4” 1/2” 1-1/4” 8.10

WL-1305* 8° 1/2” 13/16” 1-3/4” 8.75

WL-1299** 14° 1/2” 1/2” 1” 13.75

WL-1299-1** 14° 1/2” 1/2” 15/16” 16.25

WL-1303 and WL-1303-1 are used with most dovetail jigs.*WL-1303-1 and WL-1305 have an extended shank length needed for the Leigh™ jig. **WL-1299 has a 1/2” OD Shank Mounted Bearing and WL-1299-1 has a 5/8” OD shank-mounted bearing. Both are useful with templates.

Shank: 1/2” dia., 1½” length

PartCutting Dovetail Cutting Shank

PriceAngle Width Length Length

WL-1310 7-1/2° 1/4” 5/16” 1-1/2” 8.10

WL-1311 8° 3/8” 3/8” 1-1/2” 8.10

WL-1312 14° 1/2” 1/2” 1-1/2” 8.10

WL-1312-1 8° 1/2” 13/16” 1-1/2” 8.10

WL-1313 8° 11/16” 1” 1-1/2” 10.00

WL-1314 14° 3/4” 5/8” 1-1/2” 10.00

WL-1315 8° 13/16” 1-1/4” 1-1/2” 11.25

Dovetail joints

Dovetails are used for drawer and case joint construction. two of the most common types are half blind and through dovetails. Half blind are so named because they are only visible from one side of the joint. Most half blind dovetails are made with a 14 degree angle bit. through dovetails are visible from both sides and are usually cut with a 7-1/2 or 8 degree angle bit.

Many 1/2” dovetail jigs use a 7/16” guide bushing and a 1/2” 14° dovetail bit. the secret to successful jig use is bit height and edge alignment of the material. Set the depth of cut to 3/8” as a starting point and increase depth if joint is loose, decrease if joint is tight.

SAM MALOOF SIGNATURE SERIES

mAlOOf JOINT BITS

Sam Maloof is recognized as one of America’s foremost craftsmen. As a master woodworker he has perfected his joinery to a level of artistry that is astounding. To aid in his work, he developed some very special router bits. Woodline USA is the official manufacturer of Sam Maloof precision router bits for joinery. These bits fea-ture a unique tapered rabbet bit with tapered bearings developed to make the dovetail joints specificaly for the “Maloof chair”.

SHANK: 1/2” Dia.1½” Length

Part

# cuttingDiameter

bearingPrice

pieces depth slope

WL-6220 2 piece 5/8” 1” 5° 93.75WL-6220 has a 5 degree angle and is used on the Maloof rocking chair to join the arms and legs to the bottom of the chair.

WL-6221 2 piece 5/8” 1” 3° 93.75WL-6221 has a 3° angle and is used in straight chairs and otherright angle interlocked dovetail joints.

WL-6222 1 piece 5/8” 1” 0° 43.75 WL-6222 has no included angle (0°) and is used for joinery inother areas of Maloof furniture.

KEY hOlE CuTTERS

Use this handy bit for mounting pictures, plaques, clocks or small cabinets.

SHANK: 1/4” Dia., 1¼” LengthPart

Large Slot SmallPrice

Dia Height Dia

WL-1290 3/8” 3/16” 1/4” $10.00

SHANK: 1/2” Dia., 1½” LengthPart

Large Slot SmallPrice

Dia Height Dia

WL-1289 3/8” 3/16” 1/4” 12.50

Make jigs, tools and accessories such as T-rail slots for your router table.

SHANK: 1/4” Dia., 1¼” Length

PartLarge Slot Small

PriceDia Height Dia

WL-1291-1 3/4” 1/8” 3/8” $16.25

SHANK: 1/2” Dia., 1½” Length

Part Large Slot Small

PriceDia Height Dia

WL-1291 1” 3/8” 3/8” 22.50

WL-1291-2 3/4” 1/4” 3/8” 17.50

WL-1291-3 5/8” 3/16” 3/8” 20.00

WL-1291-5 15/32” 9/64” 9/32” 20.00NOTE: Use WL-1291-5 for standard oval track bolts.




TEChTIP

T-SlOT CuTTERSLarge Diameter

Small Diameter

SlotHeight

LargeDiameter

SlotHeight

Small Diameter

DovetailWidthCL

CuttingAngle

WL-1312

WL-1291

WL-1303 WL-1299

WL-1301

WL-1290

Joinery Bits

39

COmBINATIONBOx JOINT SETPerfect box joints with finger lengths of 1/4”, 3/8”, and 1/2” for fine furniture and cabinetry. For any lengths in-between, adjust the fence to the desired depth of cut. Five carbide tipped precision 3/16” slot cut-ters allow cutting lengths up to 1-11/16”.

Part CD CLTooth Bearing Tooth

PriceThickness OD Depth

WL-1432 1-25/32” 1-11/16” 3/16” 7/8” 1/2” $81.25

Bearing changes to 1-1/8 3/8”

Bearing changes to 1-3/8” 1/4”


fINgER JOINT BITFinger joints are used commonly in end-gluing applica-tion to join two boards of equal width and thickness end to end. Our one piece finger joint bit is designed to give a tight solid fit across the entire surface of the joint edge. The flush bottom-mounted bearing eliminates the need for complex fence alignment procedures while the stag-gered cutting order and full tooth surface taper signifi-cantly reduces finish sanding.


Part CD CLTooth Tooth Bearing

PriceDepth Taper OD

WL-1429 1-3/8” 1-1/2” 5/16” 1/8” - 1/16” 3/4” $56.25

AdJuSTABlE fINgER JOINT BIT

Complete with 6 stackable cutters, guide bearing, and shims, this cutter can be custom-ized for use on sizes of material from 1/2” to 13/8”. For wider material, make 2 passes with this reconfigurable bit and reach thicknesses over 2”. The shank-mounted bearing simplifies fence setup, while the enhanced bit-centered chip clearance pulls the chips away from the cutter teeth providing precision tight fitting finger joints in even the hardest woods.

Part CD CLTooth Tooth Bearing Bearing Shim Shim

PriceDepth Taper OD ID od Thickness

WL-1431 15/16” 7/16” - 13/8” 1/4” 1/8” - 1/16” 1-7/64” 13/16” 5/8” 1/8” $75.00


note: Each of the stackable cutters is tapered as shown. Bit is pictured with cutters spaced diagonally around shank. The cutters may also be aligned vertically as shown on WL-1432 above.

SlOT CuTTER fORdEmOuNTABlE hINgES

For easy installation of demountable hinges.

Part Large Slot Small

PriceDia. Height Dia.

WL-1291-4 1-1/8” 1/4” 3/8” $22.50

TestimonialI developed a special jig that required a very high-tolerance, perfect fit dovetail to produce the desired result. The accuracy of the bit was essential to my design. I tried many different brands and found that Woodline bits were designed and ground to the high tolerance I required. The service has been great and the bits are of exceptional quality.

Pat Allen, Designer, Inventor Allen Designs

Shank: 1/2” dia., 1½” length 1/4” Shank iS ReD1/2” Shank iS BLue



Large Diameter

Small Diameter

SlotHeight

ToothDepth

CL

Bearing ODCD

ToothDepth

Bearing OD

CD

WL-1291-4

WL-1432

WL-1429

WL-1431



Joinery Bits

SlotHeight

40

PARAllEl TONguE & gROOvE BITThis modified one piece tongue and groove is designed similar to a reversible glue joint in that you cen-ter the cutter the cutter in the stock, make the first cut face up and the adjoining edge face down. That’s it! No changing out cutters or adjusting the elevation between cuts.

Part CD CLTooth Tooth Min. Max.

PriceThickness Length Thickness Thickness

WL-1257 1-5/8” 1-1/16” 1/8” 5/32” 9/16” 1-1/16” $37.50

Shank: 1/2” Dia. Only, 1½” Length

2-PC v-gROOvE TONguE & gROOvE SET

Part CD CLTooth Min. Max.

PriceDepth Thickness Thickness

WL-1483 1-3/8” 15/16” 3/16” 5/16” 3/4” $56.25

2 piece V-groove tongue and groove with 90° V-groove features a rounded 1/8” tongue and groove.

fullY AdJuSTABlE TONguE & gROOvE

Part CDTooth Tooth

PriceThickness Length

WL-1224 1-5/8” 13/64” - 13/32” 3/8” $67.50

Similar to a standard tongue and groove cutter set, but the tongue thickness and slot heights are adjustable. Perfect for making shaker doors with undersized plywood panels. Adjusting shims included.

flOORINg & PANElINg TONguE & gROOvEThese specialty slot cutters are designed for use with a hand router on installed flooring to cut a groove for another piece of flooring or a spline joint. WL-003 also features a nail relief groove which allows for the nail to be completely buried without lifting the panel.

PartCutting

HeightSlot Slot Bearing Nail

PriceDia. Thickness Depth OD Relief

WL-001 1-1/4” 1/8” 1/8” 5/16” 5/8” NA $22.50

WL-002 1-1/4” 1/4” 1/4” 5/16” 5/8” NA 22.50

WL-003 1-3/16” 7/16” 3/16” 1/4” 5/8” 1/8” 22.50

WL-004 1-1/4” 7/32” 7/32” 5/16” 5/8” NA 22.50

2-PC TONguE & gROOvE wITh 15° fACECuT fOR RAIl & STIlESSame advantages of the WL-1338 series but includes a 15° slope on the outer edge.


PriceDepth Length Thickness Thickness

WL-1338-15 1-1/2” 1-1/8” 1/4” 3/8” 7/16” 13/16” $81.25

Shank: 1/2” Dia. ONLy, 1½” Length

ClASSIC 1/4” TONguE & gROOvEOne bit cuts both the tongue and the groove. Cut the tongue first by aligningthe cutter on the desired height of the joint. Once the tongue is cut, raise or lower the cutter to align one of the slot cutters with the tongue. Cut the corresponding groove in the exact location needed for a precision joint without complicated measurements. For thicker materials, flip the board over to create a dual tongue and groove that will hold up to an incredible amount of stress.



WL-1484 1-5/8” 3/4” 1/4” 3/8” 7/16” 3/4” $42.50

Shank:1/2” Dia. ONLy, 1-1/2” Length


Shank: 1/4” Dia. ONLy, 1” Length

Shank: 1/2” Dia. ONLy 1-1/2” Length

WL-1257

WL-1483

WL-1224

WL-001

WL-004

WL-1338-15

WL-1484

CD

ToothThickness

ToothLength

CL

CD

ToothThicknessTooth

Length

Joinery Bits

41

2-PC TONguE & gROOvE SETPerfect for flawless production of Shaker, colonial, or traditional rails and stiles for cabinet doors. This bit cuts the entire surface of both the male and female aspects of the joint, providing a flawless match across the entire length of the board. Use our special 5.5mm tongue and groove set (WL-1338-5.5) for panels made from undersize plywood for a “no rattle” insert.



WL-1338 1-1/2” 1-1/8” 1/4” 3/8” 7/16” 13/16” $68.75 WL-1338-5.5 1-1/2” 1-1/8” 5.5mm(7/32”) 3/8” 7/16” 13/16” $68.75

TestimonialI know you don’t hear from us a whole lot, but mostly that’s because although we use your cutters nearly every day, they just never seem to give up! We’ve tried every other brand out there, and none of them hold a sharper edge longer than Woodline!Our hardwood antique car frames and coaches are highly stressed assemblies. The rigors of the road and demands of the show judges require 100% airtight joinery. The precision geometry and exceptionally smooth cuts we get with Woodline cutters are invaluable to us in maintaining that standard. Couple that with friendly world-class service and reasonable pricing and the choice is simple. We buy nothing but Woodline!Mark Johnston, PresidentMidwest Coach & Carriage Works

SPECIAlTY 1-PC TONguE & gROOvE BITBoth bits include a unique rounded tongue that allows easy installation of panels, even in tight spaces. Align the cutter to the board thickness and cut the tongue first, then raise the cutter so that the slot cutter is aligned with the tongue and cut the groove. WL-1488-1 is for standard 3/4” T&G and features a nail relief groove above the tongue allowing the nail to be completely buried without lifting the panel to insure a tight fit. With its 1/8” tongue, WL-1488-2 is designed for thin material applications, and may be used on material as thin as 7/16” up to 7/8”.



WL-1488-1 1-3/4” 1-1/2” 1/4” 1/4” 7/16” 7/8” $56.25

WL-1488-2 1-3/16” 7/8” 1/8” 1/8” 1/4” 1/2” $40.00

1/4” TONguE & gROOvE wITh “v” gROOvE

This bit combines a standard 1/4” tongue and a standard “V” groove on the face of the joint. WL-1488 includes a unique rounded tongue that simplifies installation by allowing easily installation of panels with allowance for glue space. Cut the groove side first, then replace the slot cutter with the included spacer bushing to cut the tongue. Perfect for both flooring and paneling applications.

Part CD CLTooth Tooth V Groove V Groove Min. Max.

PriceThickness Length Angle Height Thickness Thickness

WL-1488 1-5/8” 1-3/16” 1/4” 1/4” 45° 1/4” 5/8” 1” $43.75

Shank: 1/2” Dia. ONLy, 1-1/2” Length

WL-1338-5.5


Shank: 1/2” Dia. ONLy, 1-1/2” Length WL-1488-1

Shank: 1/2 Dia. ONLy, 1-1/2” Length

WL-1488


ToothDepth

ToothLength




WL-1488-2

CD

CL

ToothDepth

ToothLength

NailRelief

Makes beautiful V-groove paneling!

CD

CL

ToothDepth

ToothLength

Joinery Bits

42

dRAwER lOCK BITThis bit’s special design allows for greater precision cuts involving overlapping drawer fronts, allows you to produce drawers faster, stronger, safer, and cleaner than ever before.

QUICK TIP: Run sides vertically against the fence, then set the fence back for the thickness of the material and run the back and front panels of the drawer horizontally. Reset the fence and cut all the slots for the drawer bot-tom. Detailed instructions available at www.woodline.com.


PriceDepth Taper Thickness Thickness

WL-1435 1-3/4” 1/2” 3/16” 5/32” - 13/64” 5/16” none $43.75

wAINSCOT PANElINg BITSBits have the mated 3/16” rounded tongue and groove with the distinguishing double-sided full depth 45° “V” groove cutters. The third bit produces the partial 9/32” bead with “V” groove.

Shank: 1/2” Dia. OnlyWL-1146 3-PC Wainscot Set $93.75

22-1/2° lOCK mITER 2-PC SET

Part CD CL PriceWL-1495 1-1/2” 1-3/32” $73.75

Make octagons or the corner cabinet project that you’ve been putting off. This set will make a perfect 45° angle and make glue-up a snap.

90° “v” gROOvEMale and female complimentary cuts allow production of a simple self-centering glue joint with more glue surface than a straight butt joint. Perfect for applying banding to a plywood panel.

PartType Cutting Cutting Cutting

Priceof Cut Diameter Length Depth

WL-1324M Male 1-1/4” 3/4” 3/8” $43.75

WL-1324F Female 1-1/4” 1” 3/8” $43.75

WL-1324FM Get Both Bits For Only $73.75

2-PC BOAT PlANKINg SET

This boat planking set is used to make the water-tight interlocking joint that will form a curve. These bits feature an oversized overall diameter which simplifies cutting cedar and other popular boat materials, producing the flawless joint that will keep your boat or canoe above water. Also makes great slats for planters, buckets and curved columns using 1/4” material.

Part CD CLTongue Tooth Min. Max.

PriceDepth Length Thickness Thicknes

WL-1489 1-1/2” 7/16” 1/4” 1/4” 1/4” 21/32” $48.75


WL-1435



WL-1489

WL-1146

Shank: 1/2” Dia., 1-1/2” Length WL-1324m

WL-1324f




CD

CL ToothDepth

WL-1495

Joinery Bits

43

45° lOCK mITER BITS45° Lock Miter bits are perfect for producing extra strong 90° miter joints. These modified tongue and groove bits effectively double the glue surface area of the joint while distributing the mechanical stress across a much larger percentage of the surface. This creates a joint that is, in most cases, many times stronger than the wood itself. Perfect for boxes, cabinet framing, fine furniture framing, columns, hollow beams, and much more.

PartCutting

HeightMin. Max.

PriceDiameter Thickness Thickness

WL-1420-2 1-1/2” 1/2” 3/8” 1/2” $36.25


PartCutting

HeightMin. Max.

PriceDiameter Thickness Thickness

WL-1420 2-3/4” 1-1/4” 3/4” 1-1/4” $55.00

WL-1420-1 2” 7/8” 1/2” 3/4” $42.50

WL-1420-3 1-1/2” 13/16” 3/8” 5/8” $36.25

45° LoCK MitER BitS

1. Insert and properly tighten Lock Miter bit in the collet. At least 1” - 1¼” of shank must be in collet for safety. Set router for proper speed.

2. Adjust router until the centerline of cutter aligns with centerline of stock. An easy method to determine the center is to miter a sample cut in two pieces. Rotate one piece and fit together. Adjust height for ½ the distance of the misalignment from flush. Be as accurate as possible.

3. Set fence back from leading edge of bit an equal distance to the stock thickness. This should produce a knife edge when cut.

4. Perform test cut to make sure bit is set up evenly. A good way to ensure that the cut is centered properly is to measure each 45° plane. If each plane is the exact same length, the cutter is properly centered. (See A=B)

5. With stock cut to size, cut side A with material cut horizontally.

6. With stock cut to size, cut side B with material cut vertically.If snipe occurs at end of cut, it may be due to excessive pressure against fence or table. you can use double-face tape to secure a guide strip to the side of both A and B. This will serve as a guide against the fence and table. you should not have to re-adjust the fence location to allow for the scrap.

Visit www.woodline.com for the latest tips and instructions.

REvERSIBlE gluE JOINTUse this bit to edge join materials with a maximum gluing surface for table-tops or large panels. The slight taper aids in aligning the boards by drawing the surfaces together to produce per-fectly aligned faces on jointed surfaces with no squeeze-out.



WL-1430-3 1” 1-1/4” 7/32” 5/32” 9/16” 1-1/4” $37.50




WL-1430 1-3/4” 1-1/4” 3/16” 3/16” 9/16” 1-1/4” $43.95

REvERSIBlE gluE JOINT fOR dRAwERSMiniaturized version of our standard reversible glue joint bit, spe-cifically designed to handle material smaller than 9/16” as commonly used in drawer construction.



WL-1430-1 1-1/16” 3/4” 3/16” 5/32” 1/2” 3/4” $30.00



WL-1430-2 1-1/16” 9/16” 5/32” 5/32” 7/16” 9/16” $30.00



WL-1420

WL-2042 1/2” Shank only $111.20


WL-1430

WL-1430-3



WL-1430-2





Buy the Set & Save!WL-2042 Lock miter Set

Get 3 of the 1/2” shank lock miter bits packaged in a set. A $144 value!

TEChTIP


Joinery Bits

44

2-PC RAIl & STIlE mATChEd SETSOur 2-piece rail & stile sets are factory-matched with precision grinding for a perfect fit every time. The included fully enclosed ball bearing al-lows you to make arched raised panel doors by using templates.

Part ProfileSlot Slot Profile Profile Cut

PriceHeight Depth Height Depth Dia.

WL-1360C Roman Ogee 1/4” 3/8” 3/8” 3/8” 1-1/2” $81.25

WL-1361C Roundover 1/4” 3/8” 3/8” 1/4” 1-3/8” 81.25

WL-1362C Cove & Bead 1/4” 3/8” 3/8” 3/8” 1-3/8” 81.25

WL-1399C Classic Ogee 1/4” 3/8” 7/16” 3/8” 1-1/2” 81.25

SAFETy NOTE: Because these bits have a 1/4” shank, extra care and multiple passes must be taken. Taking multiple passes greatly reduces the possibility of injury and the possibility of damage to the cutters.


Part ProfileSlot Slot Profile Profile Cut

PriceHeight Depth Height Depth Dia

WL-1336-2 Roundover w/Bead 1/4” 3/8” 7/16” 3/8” 1-5/8” $81.25

WL-1337-2 Classic Ogee 1/4” 3/8” 13/32” 3/8” 1-5/8” 81.25

WL-1338-15 15° Facecut (Shaker) 1/4” 3/8” 7/16” 3/8” 1-1/2” 81.25

WL-1360** Roman Ogee 1/4” 3/8” 7/16” 3/8” 1-5/8” 81.25

WL-1360-5.5* Roman Ogee 5.5mm 3/8” 7/16” 3/8”” 1-5/8” 81.25

WL-1361** Roundover 1/4” 3/8” 7/16” 3/8” 1-5/8” 81.25

WL-1361-5.5* Roundover 5.5mm 3/8” 7/16” 3/8” 1-5/8” 81.25

WL-1362** Cove & Bead 1/4” 3/8” 7/16” 3/8” 1-5/8” 81.25

WL-1368-2 Wedge 1/4” 3/8” 7/16” 3/8” 1-5/8” 81.25

RAIL & STILE BITS Rail and stile doors are easily produced and once you have mastered the techniques they are easy to setup and run. For the novice they can be intimidating due to the complex nature of the required fit. There are some simple steps that can help to make the project go easier at our website, www.woodline.com.

Shank: 1/4 Dia., 1-1/4” Length

WL-1336-2

WL-1337-2

WL-1361WL-1338-15

WL-1368-2




WL-1360

WL-1362

TEChTIP


Buy the Set & Save!Cabinet Making Sets

$ave by buying one of the 3 pc or 6 pc sets shown on page A1. We also have set up blocks, instruc-tional DVDs and written instructions to assist you.

Door, Window & Cabinetry Bits

45

1-PC RAIl & STIlE BITSProduce rail and stile door frames for cabinet doors. These bits don’t need to be taken apart, reversed, or have parts swapped, just raise and lower the bit to change cuts. Rail end is cut face up and edge is cut face down. Works great with all 3/4” standard thick-ness material.

Cutting Cutting Slot Slot Profile ProfilePrice

Length Diameter Height Depth Height Depth

1-11/32” 1-5/8” 1/4” 3/8” 7/16” 3/8” $65.00

Part Profile Description

WL-1336 Roundover with Bead

WL-1337 Classic Ogee

WL-1365 Roman Ogee

WL-1365-5.5 Roman Ogee (for undersize plywood)

WL-1366 Roundover

WL-1367 Cove and Bead

WL-1368 Wedge

WL-1374 Double Roundover

3-PC REvERSIBlE SASh CuTTER SETMake your own windows. Our 3 piece set gives you a choice of using a butt joint, tenons, or dowels.

2-PC wINdOw gRIll CuTTER SETMake snap-together grills for a divided-light look. Cutters create the perfect-fitting lapped joint you need. Instructions available online at www.woodline.com.

WL1364S $111.25Profile: OgeeCD: 1-1/4”Slot Height: 3/16”Slot Depth: 3/8”Profile Height: 3/8”Profile Depth: 1/4”Min - Max Thickness: 4/8” - 1-11/16”

Shank: 1/2” Dia. ONLy, 1-1/2” LengthWL-1336

WL-1337

WL-1367



WL-1468

WL-1468 2 pc. set $37.50

WL-1374

WL-1365

WL-1368WL-1366


46

PANEl RAISERSRaised panel doors are the standard for kitchens cabinets, jewelry boxes, entry and passage doors, fine furniture, and much more. Woodline’s many premium rail and stile cutters combine with any of our panel raisers to achieve the look you’re after.

hORIzONTAl PANEl RAISERSAvailable with and without undercutter. Undercutter cuts the back side of the door making a tongue to fit the slot in rail & stile at the same time the profile is cut.

31/2” dIA. PANEl RAISERSThese bits DO NOT have an undercutter.SAFETy NOTE: MUST USE VARIABLE SPEED ROUTER AT MAXIMUM 10,000 RPM.

SHANK: 1/2” Dia. only, 1½” LengthCutting Cutting

RevealBearing

Price Diameter Length OD

3-1/2” 5/8” 1-1/2” 1/2” $58.00


WL-1329 Double Convex

WL-1350 Ogee

WL-1351 15° Face Cut

WL-1352 Traditional

WL-1353 Convex

WL-1359NU 12° Face Cut with Quarter Round

WL-1363NU Southwest

WL-1414 Triple Step

WL-1421 Ogee with Stepped Cove

WL-1423 Ogee with Bevel

WL-1424 12° Face Cut with Ogee

INTERIOR/ExTERIOR dOOR RAIl & STIlE SETS3 piece set allows double-sided traditional rail and stile joinery with either doweled or mortise and tenon joints. Interchangeable center cutter and bearings (included) for 1/4” or 1/2” panels. Interior door typically use 11/4” stock with 1/4” edge panels and exterior doors use 13/4” stock with 1/2” edge panels. Included cope cutter for tenon joints allow any length of tenon for extra strong joints.


Part Profile Price

WL-1418-3 Roman Ogee $211.25

WL-1419-3 Roundover 211.25

CD: 1-5/8”Slot Height: 1/4” or 1/2”Slot Depth: 3/8”Profile Height: 19/64”Profile Depth: 3/8”Min Thickness: 7/8” (1/4” Slot)Max Thickness: 2” (1/2” Slot)

WL-1363nu WL-1414 WL-1421 WL-1423 WL-1424

WL-1352 WL-1353 WL-1359nu

WL-1329

WL-1350 WL-1351




WL-1418-3 WL-1419-3


47

3-1/4” dIA. PANEl RAISERS wITh uNdERCuTTERThese panels raisers are by far the most popular in our collection. Cut both the profile and the 1/4” tongue with the same bit. SAFETy NOTE: MUST USE VARIABLE SPEED ROUTER.

Cutting CutReveal

UC UC BearingPrice

Dia Length Dia Height OD

3-1/4” 5/8” 1-3/8” 1-5/8” 1/4” 1/2” $67.50

*With WL-1346-5.5, tongue produced will be 5.5mm foruse with undersize plywood rail & stile sets.

2-1/2” dIA. PANEl RAISERSThese bits DO NOT have an undercutter. SAFETy NOTE: MUST USE VARIABLE SPEED ROUTER.

Cutting CuttingReveal

BearingPrice

Dia Length OD

2-1/2” 5/8” 1” 1/2” $37.50

Part Profile DescriptionWL-1350-1 OgeeWL-1351-1 15° FacecutWL-1352-1 TraditionalWL-1353-1 Convex

WL-1354 $25.00Cutting Diameter: 1-3/4”Cutting Depth: 5/8”Cutting Length: 3/8”Edge Radius: 3/8”Bearing OD: 1/2”

Shank: 1/2” Dia. ONLy, 1½” Length


Shank: 1/2” Dia. ONLy 1-1/2” Length

WL-1350-1WL-1351-1

WL-1352-1

WL-1353-1

WL-1354

WL-1346


WL-1346 Ogee

WL-1346-3 Shallow Ogee for 5/8” Stock

WL-1346-5.5* Ogee with 5.5mm Undercutter

WL-1347 Traditional

WL-1348 Convex

WL-1351-2 15° FacecutWL-1359 12° Facecut with Quarter RoundWL-1363 Wave

WL-1347

WL-1363WL-1359

WL-1348

WL-1351-2

uNdERCuTTER fOR PANEl RAISERS

Shave away the exact amount of material for a glove-like fit into your rail & stile.



48


OgEE PANEl RAISER wITh uNdERCuTTER

SAFETy NOTE: USE VARIABLE SPEED ROUTER.

SHANK: 1/2” Dia. ONLy, 1½” Length

PART

Cut CutReveal

UC UC Panel BearingPrice

Dia Length Dia Hgt tongue OD

WL-1346M 2-3/16” 1/2” 27/32” 1-5/8” 1/4” 1/4” 1/2” $67.50

WL-1346-2 2-3/4” 1-1/16” 1-1/8” 1-7/8” 1/4” 1/4” 1/2” 67.50

2” dIA. PANEl RAISERSThese bits DO NOT have an undercutter.

Safety note: Since these bits have a 1/4” shank, extra care and multiple passes must be taken. taking multiple passes greatly reduces the likelihood of injury and the possibility of damaging the cutters.


BearingPrice

Diameter Length OD

2” 1/2” 3/4” 1/2” $31.25


WL-1387 Ogee

WL-1388 20° Facecut

1-3/4” dIA. PANEl RAISER

This bit DoeS not have an undercutter.


BearingPrice

Diameter Length OD

13/4” 1/2” 5/8” 1/2” $26.25


WL-1349-1 Elongated Sloping Ogee

vERTICAl PANEl RAISERSVertical panel raisers require less router power to operate than horizontal models and need a smaller opening in the router and table. They cannot be used with patterns to make arched doors. A tall router table fence is recom-mended to prevent tipping of the material as it is cut.

Part

Profile RevealCutting

PriceDiameter

WL-1355 Ogee 1-5/8” 1-1/2” $47.50

WL-1356 15° Face cut 1-5/8” 1-1/2” 47.50

WL-1357 Traditional 1-5/8” 1-3/8” 47.50

WL-1358 Convex 1-5/8” 1-1/2” 47.50

WL-1359-V 12° Face cut w/Quarter Round

1-5/8” 1-3/8” 47.50

WL-1363-V Wave 1-5/8” 1-5/8” 47.50


WL-1349-1WL-1349 Cutting Profile

WL-1388

WL-1387


WL-1346m


WL-1357 WL-1358

WL-1359-v WL-1363-v

WL-1355 WL-1356

CD

Reveal


49

dOOR lIP BITS

Door lip bits add a finger pull style profile to the door or drawer edge allowing you to create that hardware-less finish that visually thins the edge. These bits are also great for table edges.

PartTop Bottom Narrow Depth Height

Price

Diameter Diameter Diameter of cut

WL-1450 1-5/8” 1-1/16” 19/32” 1” 1” $40.00

WL-1451 1-5/8” 1-3/16” 1/2” 1-1/8” 1” 40.00

WL-1452 1-1/2” 1-1/2” 5/8” 7/8” 1-3/8” 40.00

WL-1453 1-5/8” 1-5/8” 11/16” 15/16” 1-9/32” 40.00

WL-1454 2-1/4” 1” 3/4” 1-1/2” 1” 43.75

WL-1454-1 2” 1” 3/4” 1-1/4” 1” 43.75

WL-1454-2 1-1/4” 1” 5/8” 1/4” 1-1/16” 43.75

WL-1454 is a specially designed door lip to accommodate Euro-pean hinges.

EuROPEAN hINgE 35mm BORINg BIT

This forstner-style bit allows you to produce a clean, flawless 35mm hole for popular European recessed hinges.

PLEASE NOTE: FOR DRILL PRESS USE ONLy AT LOW SPEED

Shank: 3/8” Dia., 1¼” Length Part Cutter Diameter Cutting length Price

WL-1135 35mm (13/8”) 9/16” $26.00

fINgER Pull BITSFinger pull bits are a perfect profile for drawer finger edges and cabinet door lips.

SHANK: 1/2” DIA. ONLy, 1-1/2” LengthPart

Top Bottom NarrowDC Height PriceDiameter Diameter Diameter

WL-1425 1-1/2” 1-7/8” 1” 7/8” 1-1/8” $40.00WL-1425-1 1” 1-1/8” 13/16” 5/16” 3/4” 25.00

2-PC RAIl & STIlE SET fOR glASS dOORSEliminates the standard lip left on normal rail and stile cuts allowing glass installation with glass retainerbrackets shown below.


WL-1339 $68.75

Profile: Roundover

CD: 1-1/4”

Slot Height: 3/16”

Slot Depth: 3/8”

Profile Height: 3/8”

Profile Depth: 1/4”

Min - Max Thickness: 5/8” - 13/16”

glASS RETAINER BRACKETS

Holds glass securely in place.

WL-1339C $0.13 each


WL-1450 WL-1451

WL-1452 WL-1453

WL-1454

WL-1454-1 WL-1454-2

WL-1135

WL-1356

WL-1425-1WL-1425 Cutting Profile




WL-1339


WL-1450 WL-1451

Bottom D

Top D

Narrow D

NOTE: WL1452 may also be used as a sill edge


50

Beeswax and Carnuba Wax. Comes with a recipe for Wood Polish

7 PC COuNTERSINK SETDrill pilot holes and countersinks in one step. 1/8”, 9/64”, 5/32” 11/64”, 13/64”, 3/16” and 7/32”. Bits are replace-able. Wooden storage box included.

WL-QCD7 $25.00

ROuTER BIT STORAgEProtects and organizes router bits. Holds up to 60 1/4” shank and 50 1/2” shank bits in a sturdy foam insert. Perfect for use in drawers.

WL-RBS $18.95

BRASS mEASuRINg BARSThis five piece set will be indispensable in your shop. Sizes: 1/8”, 3/16”, 1/4”, 3/8” & 1/2”.

WL-BBAR $25.00

Produce a clean, flat-bottomed hole every time. Features a 3/8” diameter hex shank for a drill press, precision centering tooth, full surface shearing, high rake angle and anti-walk stabiliza-tion teeth.

CARBIdE fORSTNER BITS

PART SIzE PRICE4250 1/4” $16.004312 5/16” 17.004375 3/8” 17.004468 7/16” 17.004500 1/2” 18.004562 9/16” 18.004625 5/8” 18.004687 1-1/16” 18.004750 3/4” 19.004812 13/16” 20.004875 7/8” 20.00

PART SIzE PRICE4937 15/16” 22.004100 1” 22.004116 1-1/16” 23.005125 1-1/8” 23.004316 1-3/16” 24.004112 1-1/4” 25.004131 1-5/16” 25.004137 1-3/8” 25.004143 1-7/16” 27.004150 1-1/2” 27.004156 1-9/16” 28.00

PART SIzE PRICE4162 1-5/8” 30.504168 1-11/16” 30.504175 1-3/4” 30.504181 1-13/16” 30.504187 1-7/8” 32.504193 1-15/16” 33.504200 2” 35.004206 2-1/16” 36.004212 2-1/8” 36.00

COllET ExTENdERExtend the depth of cut up to 2-1/4”. New smaller round style ideal for bowl projects. Available in ½” shank only.

WL-COLEXT $31.25

COllET REduCERAdapter for using 1/4” bits in your 1/2” router. “Top hat” style for ease of use.

WL-7800 $5.00

hdPE SlICK ShEETSHigh density polyethylene sheets are perfect for jigs, fixtures and fences. 4”x48” lengths are available in a variety of thicknesses for all your project needs. Sheets are easily cut withcarbide tipped saw blades and router bits. Useful for table sawrunners, router templates, T-trackapplications, stepped fences or forcountless other projects around your shop. Use the 3/8”x3/4” strip in any standard miter slot.

ADT850 1/4” x 4” X 48” HDPE Sheet $13.75ADT851 3/8” x 4” X 48” HDPE Sheet 17.50ADT852 1/2” x 4” X 48” HDPE Sheet 20.00ADT853 3/4” x 4” X 48” HDPE Sheet 26.50ADT854 3/8” x 3/4” X 48” Miter Strip 6.90

WL-C100 Horizontal Clamp - 500 lb holding cap. $9.50WL-C102 Horizontal Clamp - 250 lb holding cap. 9.50WL-C101 Vertical Clamp - 250 lb. holding cap. 9.50

ROuTER TABlE INSERT9” X 12-1/16” X 3/8” black ther-moset insert. Router bit changesand adjustments are easy witha router table insert. Remove-able rings (3-7/8”, 2-5/8” & 1-1/4” openings) provide close support or your material. Leveling screws in each corner. See instructions for router installation at www.woodline.com.

ADT170A Thermoset Table Insert $34.99INSTEM MDF Installation Template 17.50

NOTE: This item is oversized and additional shipping charges may be applied.

TOgglE ClAmPSProvides an economical method for work holding and clamping. These powerful clamps have great holding pressure and are easy to adjust.

wOOdlINE AdJuSTABlE PuSh BlOCKSafety should always be your first consideration in the workshop. This ultra heavy-duty push block has been specifically designed with the woodworker in mind. With fully adjustable handle position, adjustable material catch stops, and super grip pad, this push block is great anywhere in the shop. you deserve the best!WL-PB1 Woodline Adjustable Push Block $37.50

WL-C100

Accessories

WL-C102

WL-C101

Order your Woodline Products today from Stockroom Supply.

1-877-287-5017www.stockroomsupply.com

51

Roto RaspaRoto RaspaA universal disc for angle grinders - A fully patented Croation product. This superior product is used for cutting soft materials such as wood, plastic, rubber etc. and removes the particles through the holes in the disc, so that they are not reground (causing friction and heat which shorten the life of other comparable products.) It’s unique design makes it possible to remove large amounts of material in a few quick passes. Available in 3 grades - Coarse, Medium and

ImportantNot for Use on Steel, Stainless or Glass

Beexwax ProductsATTENTION TURNERS We now sell Beeswax and Carnuba Wax for you finishing needs. Each package comes with instructions on how to make your own wood polish. And for everyone ... moisturizing cream with beeswax and lip balm for the times that your shop dries out your skin OR for anytime!! (Great gift idea!) All natural products.

Item Price5 oz. Beeswax $7.00

5 oz. Carnuba Wax $9.005 oz. Combo Pack $8.002 oz Skin Cream $9.25

Lip Balm $4.00Beeswax and Carnuba Wax.

Comes with a recipe for Wood Polish

Skin CreamLip Balm

5 Flavours - Natural, Peppermint, Cherry, Tangerine, and Bubblegum


Item Price

Roto Raspa Fine $32.95

Roto Rasoa Medium $32.95

Roto Raspa Coarse $32.95

1 of Each $79.00

52

Super Pads

Toll Free Ordering 1-877-287-5017

An innovative design, the Use-it SuperPad is a paper disc perforated across its entire surface. This allows the sanding dust that is produced to be removed by suction across the entire surface. The 3/32” foam layer in between the sandpaper and the backing allows for cooler sanding, and additional dust collection keeping even more dust from floating around. These discs outlast most regular discs. Available in 5” and 6” discs fitting any hole pattern hook and loop orbital sander. Grit selection from 80 grit to 600 grit. Assorted package includes 80, 120, 180, 240 and 320 grits.

Disc Size *Pkg Qty Price *Pkg Qty Price Assorted Bulk 25 pcSingle Grit Price

5” 1 $1.39 10 $11.25 $11.25 $26.00

6” 1 $1.79 10 $14.95 $14.95 $35.50

Super Finishing PadsThe Superfinishing Pad allows flexibility and the finest grits available for super fine finish sanding. With its’ 3/16” foam layer within, the dust will collect within the pad rather than spread across your project. Combined with dust extraction, automotive and boat builders will find these discs nearly eliminate dust coming off

the sander, therefore maintaining cleaner air and a cleaner surface for the next coat. Woodworkers will enjoy this material for in between coat sanding, finish sanding on carvings, and because of the tremendous flexibility, woodturners will appreciate the finish they can achieve without heat build up, on spindles and bowls. Because of the price, these discs are certainly not going to replace

existing sanding discs but will be the standard for high end cabinet makers and master craftsmen. They are just too good not to have some of these discs in your shop to supplement your existing sanding methods. Available in 5” and 6” discs fitting any hole pattern hook and loop orbital sander. Grit selection from **240 grit to 3000 grit. Assorted packages include a Woodworking sampler with **240, 320, 600, 800 and 1200 grits and a Metal working sampler with 1200, 1500, 2000, 2500 and 3000 grits.

*Choose from grits available:80, 100, 120, 150, 180, 220, 240, 280, 320, 400, 500, 600

Disc Size *Pkg Qty Price *Pkg Qty PriceWoodworking or

Metalwork Assorted Sampler

Bulk25 pc Single Grit Price

5” 1 $2.39 10 $22.50 $22.50 $54.00

6” -- -- -- -- -- $84.00

*Choose from grits available: **240, 320, 600, 800, 1200, 1500, 2000, 2500, 3000

NEWLOWER

PRICE

** 240 grit is discontinued and available only while supplies last

EZee BUFF-itThis new hook and loop backed product is made from natural fibres in order to give you the benefit of being environmentally friendly. It has the ability to absorb polishes and compounds better, and will not scratch or burn. Unlike most other buffing wheels, Ezee Buff-its have the advantage of being washable and re-used over and over again. They are adaptable to all hook and loop sanders and are available in 4 different sizes. This is a great product for effective polishing or buffing on all types of materials. Ezee Buff-its are great for wood, metal, plastic, glass and any other projects that require a little touching up. You may use with your own compounds or visit Stockroom’s website for compounds that Stockroom Supply carries.

Item # Size Price

BU3002 2” EZee BUFF-it 2pc. $5.99




Applications• Final polishing of wood surfaces after laquer or polycoat

• Polishing most metals before plating• Polishing with auto repair compounds on paint repairs

• Finishing / polishing stainless steel• Cut & colour buffing prior to plating

• Polishing composite surfaces ie. boats• Buff / polish jewellery

• Deflashing rubber / plastic parts without scratching• Polishing / buffing musical instruments

• Polishing glass • Polishing leather goods• Applying wax to cars and turnings

NEWLOWER

PRICE

53

Hook & Loop DiscsA Stockroom Supply Specialty - one our most popular products!! As many of you already know, Klingspors’ stearate coated, hook and loop discs are absolutely top of the line - yet still economical. Many of our customers refuse to use any other brand. These discs are a premium product that stand up to the hardest hardwoods, won’t load up with pine and spruce, and hold up really well on painted or varnished surfaces and light metal work. The best stearate coated sandpaper for the money you’ll ever use! These discs are the freshest discs available to us. To get the most life out of them, store them in an airtight container (such as a ziplock baggie). Also available in PSA discs (pg. 24), hook & loop rolls (pg. 13) and 9x11 sheets (pg 25).Definitely The Most Sanding Power for Your Money!

Disc Size PkgQty.

80, 100, 120, 150, 180, 220,

320 grit

Pkg.Qty.

Assorted Package(5 grits -

preselected)

Pkg.Qty. 40 grit *60

*80, *100, *120, *150, *180, *220, 240, 280,

*320, 400

500, 600 grit

2” x 0 10 $3.99 25 $9.00 50 $21.50 $19.00 $16.50 $16.50

3” x 0 10 $4.50 25 $10.50 50 $24.00 $22.00 $19.00 $19.00

4-1/2” x 8 10 $5.75 25 $14.00 50 $37.00 $33.00 $27.00 $27.00

5” x 0 10 $5.50 25 $13.25 50 $31.00 $28.00 $24.00 $26.00

5” x 5 10 $5.50 25 $13.25 50 $31.00 $28.00 $24.00 $26.00

5” x 8 10 $5.50 25 $13.25 50 $31.00 $28.00 $24.00 $26.00

6” x 0 10 $6.50 25 $16.00 50 $36.00 $32.00 $29.00 $31.00

6” x 6 10 $6.50 25 $16.00 50 $36.00 $32.00 $29.00 $31.00

---Package Quantities are ONE grit only--- (excluding assorted packages)

Disc Size Pkg. Qty. *80 grit *120 grit Pkg.

Qty. 40 grit 60 grit *80, 100, *120, 150, 180, 220, 240, 280, 320, 400, 500, 600 grit

8” x 0 1 $2.20 $2.20 10 $23.00 $21.00 $19.00

9” x 0 1 $2.49 $2.49 10 $32.00 $25.00 $22.00

10” x 0 1 $3.20 $3.20 10 $45.00 $34.00 $29.00

12” x 0 1 $4.00 $4.00 10 $57.00 $45.00 $35.00

*Grits in stock. For other grits, allow for a 2 - 3 week delivery (or longer for 400, 500, and 600 grits).

These discs are rated the best value for your money.

Flexible Half Moon or Ergo Molded Hand PadNow make more use of all your Hook and Loop discs with the Flexible Half Moon Hand Pad or Ergo Molded Hand Pad. These Hand Sanders are designed to use with 5” and 6” Hook and Loop Discs


CV4050 5” Half Moon Hand Pad $6.99

CV4060 6” Half Moon Hand Pad $7.99

CV4055 5” Ergo Hand Pad $17.49CV4065 6” Ergo Hand Pad $19.49

54 We use Velcro® Brand Hook & Loop fastening system

Hook & Loop Accessories

Hook & Loop Conversion SystemThe sanding industry is rapidly changing to hook and loop - so don’t be left behind when it comes to this system. You can easily convert your existing PSA sander to the hook and loop system or replace a worn out hook and loop pad with one of these. This VELCRO® brand Hook and Loop Conversion system is equipped with a premium adhesive backing which adheres to almost any surface. A variety of sizes to choose from, including “conversion by the foot” for all you do-it-yourselfers.

Item # Size Price

CV2002 2” x 0 disc $2.99

CV2003 3” x 0 disc $3.99

CV2005 4-1/2” x 8 disc $4.99

CV2006 5” x 0 disc $4.99

CV2007 5” x 5 disc $4.99

CV2008 5” x 8 disc $4.99

CV2009 6” x 0 disc $5.99

CV2010 6” x 6 disc $5.99

CV2012 8” x 0 disc $8.99

CV2013 9” x 0 disc $9.99

CV2014 10” x 0 disc $12.99

CV2015 12” x 0 disc $13.99

CV2020 4-1/2” x 5-1/4” (1/4 sheet) $4.99



CV1012 12” wide - per foot $12.99

a tip from Paul...To Replace a worn out

Hook & Loop Pad

Remove worn Hook & Loop Conversion, or original

hook and loop pad. When disc is removed, wash

pad with laquer thinner before applying new

conversion.or

If pad will not come off simply remove sandpaper

from your sander, place a 9 x 11 sheet of sandpaper

on your work bench, grit up, and sand off worn out

hook and loops until pad is smooth. Wash with

laquer thinner to remove any dust and stick on new

conversion disc.

a tip from Paul...How to use the conversion system on your 1/4

sheet Palm Sander

No need to remove the backing. Simply clip the

conversion into your sander like you “used” to do

with your sandpaper and then cut a piece of our special 4-1/2” wide

stearate coated sandpaper roll and you’ll have the added time saving

convenience when changing grits or starting a fresh sheet.

Item # Size Price

FL3002 2” x 0 disc $5.99

FL3003 3” x 0 disc $6.99

FL3005 4-1/2” x 8 disc $14.99

FL3006 5” x 0 disc $14.99

FL3007 5” x 5 disc $14.99

FL3008 5” x 8 disc $14.99

FL3009 6” x 0 disc $16.99

FL3010 6” x 6 disc $16.99

FL3012 8” x 0 disc $17.99

FL3013 9” x 0 disc $18.99

Hook & Loop “Flex” ConversionAn awesome addition to your hook and loop conversion system, this “Flex” adapter has the capability to convert any disc sander into an extremely durable cushioned sander that will contour around any round over, chair leg, table edge or anything with shape and not leave flat spots.With the use of our hook and loop conversion discs, or an existing sander with a hook and loop system, you can make use of this remarkable product. Basically, it’s a double density foam pad with hooks on one side and loops on the other. Works great on disc sanders for shaping and moulding wood for intarsia and other projects.

55

Hook and Loop Back-up Pads Made of a high density sponge, these 2” and 3” diameter flexible hook and loop sanders are really gaining popularity, especially with woodturners. Using premium Klingspor discs, you can get right into the bottom of bowls, small vessels or all kinds of hard to sand areas and sand a finish you’ll be amazed

with. For even greater flexibility, consider adding a 2” or 3” Flex Adapter (see pg. 22). (See page 21 for 2” and 3” Hook and Loop Discs). The 5” Firm Hook and Loop Back-up Pad has an 1/8” layer of foam and a ¼” shank. Can be used in the same way as the 2” and 3” as well as with a flex adapter (see pg. 22). (See page 21 for 5” Hook and Loop Discs)

Hook & Loop Accessories

Item # Size Price

CV0020 2” $13.00

CV0030 3” $17.50

CV0050 5” $14.00

8” Face PlateThis hook and loop face plate makes a sander to use on a shaft. Comes in two sizes. Order ½” or 5/8” depending on the shaft size you require. Attach to any 1725 rpm motor but check shaft size before ordering. (See page 21 for 8” Hook and Loop Discs).

Item # Size Shaft Size Price

DR5023 8” 1/2” $22.99

DR5024 8” 5/8” $22.99

All prices quoted are in Canadian and US dollars

Shape System

Now you can turn a motor into a wonderful shaping tool. We’re happy to introduce this BRAND NEW product, we like to term “Soft Gold”, to our customers. These long lasting, foam backed, golden discs come in 5” and 8” sizes and will attach to any hook and loop system. We also carry kits where you have to option of creating your very own shape system which includes 4 sanding discs 1 of each grit. The system may be mounted on a 1725 rpm motor. PLEASE NOTE SHAFT SIZE OF MOTOR WHEN PLACING ORDER.

Item # ½” shaft Item # 5/8” shaft Description PriceBUSH512 BUSH558 5” Shape System $49.95

---- ---- 5” Soft Gold Refill* $3.95BUSH812 BUSH858 8” Shape System $49.95

---- ---- 8” Soft Gold Refill* $6.95

New

Make more use of you 3” wide V-Drum Sander paper with this 3” wide Ergo hook & loop hand sander. Sanding face measures 3” x 5”.

Hand Sander

CV4030 $15.99

*Grits available – 80, 120, 180, 220

56

Sanding Discs - PSAPaper Backed PSA DiscsThese 5” & 6” discs are used for both woodworking and metal working applications on random orbit sanders. Made from the same material as Klingspors’ hook and loop discs everyone has grown to love - a premium product that stands up to the hardest hardwoods, doesn’t load up with pine and spruce, and stands up really well to painted or varnished surfaces and light metal work. The best stearate coated sandpaper for the money you’ll ever use!

Disc Size Pkg, Qty. *80 grit *120 grit Pkg. Qty. 40 grit 60 grit *80, 100, *120, *150, *180, *220, 240, 280, 320, 400, 500, 600 grit

5” x 0 10 $4.99 $4.99 100 $70.00 $61.00 $42.00

6” x 0 10 $5.99 $5.99 100 $79.00 $65.00 $48.00

---Package Quantities are ONE grit only---


Red Cloth PSA DiscsAll of these discs are made from a semi-open coat, full resin bonded aluminum oxide cloth backed material, with a premium adhesive backing. An industrial quality disc, exceptional for both hardwoods and softwoods. Fantastic selection of grits to choose from. For longer disc life use in conjunction with an abrasive cleaner found on page 28.

--Package Quantities are ONE grit only---

Disc Size

Pkg,Qty. *80 grit *120 grit Pkg.

Qty. 24 grit 36 grit 40 grit 50 grit 60 grit*80, 100, *120, 150, 180, 220, 240, 280,

320, 400, 500, 600 grit

5” x 0 1 $1.75 $1.75 10 $22.00 $20.00 $18.00 $17.00 $16.00 $16.00

6” x 0 1 $2.50 $2.50 10 $32.00 $28.00 $27.00 $25.00 $24.00 $23.00

8” x 0 1 $4.50 $4.50 10 $57.00 $51.00 $48.00 $47.00 $44.00 $42.00

9” x 0 1 $5.25 $5.25 10 $73.00 $64.00 $61.00 $57.00 $53.00 $49.00

10” x 0 1 $6.50 $6.50 10 $89.00 $77.00 $73.00 $70.00 $66.00 $59.00

12” x 0 1 $9.50 $9.50 10 $127.00 $114.00 $107.00 $102.00 $95.00 $91.00



57

9” x 11”Wet/Dry

60grit

80grit

100grit

120grit

150grit

180grit

220, 240, 280, 320, *400, 500, *600, *800, *1000,

*1200, *1500 or *2000 grit

50 pc sleeve $75.00 $67.00 $59.00 $49.00 $49.00 $49.00 $43.00

Sheets

Stearate Coated SheetsPremium quality Klingspor sheets. Their non-loading action will outperform most other sandpapers on the market today. Superb performance on both hard and soft woods as well as light metal work. Identical paper as the Klingspor hook and loop discs (pg. 21). The best stearate coated sandpaper for the money you’ll ever use! Also available in hook and loop sheets (below).

9” x 11”Stearate Coated 40 grit *60 grit *80, *100, *120, *150,

*180, *220240, 280, *320, 400,

500 or 600 grit

50 pc sleeve single grit $50.00 $45.00 $36.00 $36.00

10 pc single grit --- --- $8.50 ---

---Sleeve contains ONE grit only---

*Grits in stock. For other grits, allow for a 2 - 3 week delivery.

Hook & Loop Stearate Coated Sheets The same non-loading sanding sheets as advertised above with an added hook and loop backing. Superb performance on both hard and soft woods as well as light metal work. Identical paper as the Klingspor hook and loop disc (pg. 21). Also available with plain backing (above).

9” x 11”Stearate Coated 80 grit 100 grit 120 grit 180 grit 220 grit Variety pkg.

2pc each grit

10 pchook & loop $18.99 $18.99 $18.99 $18.99 $18.99 $18.99

Wet/Dry SheetsSilicon Carbide paper backed sheets. Applications for this paper could include very fine finishing for turnings, sharpening and knife making, on glass and the automotive market. Excellent where a perfect finish is necessary. Each sleeve contains 50pc wet/dry sheets.

---Sleeve contains ONE grit only---

*Grits in stock. For other grits, allow for a 2 - 3 week delivery.visit our website www.stockroomsupply.com

Garnet SheetsWe are adding these sheets to our lineup because many of our woodworking customers prefer sanding with garnet. Garnet is great for sanding on a bare wood surface and is particularly useful for producing a smooth finished surface. Garnet should only be used for sanding bare wood.

9” x 11” Garnet 36 grit 40 grit 50 grit 60 grit *80 grit *100, *120, *150, *180,

*220 grit50 pc sleeve $67.00 $53.00 $46.00 $39.00 $35.00 $23.00

*Grits in stock. For other grits, allow for a 2 - 3 week delivery.

58

Belts for Portable Sanders

Belts for Bench Top Sanders

Belts for Stroke Sanders

Sanding BeltsAt Stockroom Supply, we provide our customers with the most economical yet highest quality belt with freshness guaranteed. All of the Klingspor belts listed in this catalogue are an industrial quality, semi-open coat, aluminum oxide cloth backed belt. These belts can be used on any type of wood and light metal applications.

Belt Size Pkg, Qty. 40 50 *60 *80 *100

2-1/2” x 16” 10 $24.00 $22.00 $22.00 $21.50 $21.50

3” x 18” 10 $25.50 $24.00 $24.00 $20.00 $20.00

3” x 20” 10 $29.00 $27.00 $27.00 $25.00 $25.00

*3” x 21” 1 ---- ---- $1.90 $1.90 $1.90

*3” x 21” 10 $29.00 $27.00 $17.00 $17.00 $17.00

*3” x 24” 1 ---- ---- $2.00 $2.00 $2.00

*3” x 24” 10 $30.00 $28.00 $18.00 $18.00 $18.00

*4” x 21” 1 ---- ---- $2.25 $2.25 $2.25

*4” x 21” 10 $36.00 $32.00 $20.00 $20.00 $20.00

4” x 21-3/4” 10 $36.00 $32.00 $30.00 $30.00 $30.00

*4” x 24” 1 ---- ---- $2.25 $2.25 $2.25

*4” x 24” 10 $37.00 $33.00 $20.00 $20.00 $20.00


Belt Size Pkg, Qty. 40 50 *60 *80 *100

*1” x 30” 10 $19.00 $18.00 $18.00 $18.00 $18.00

1” x 42” 10 $22.50 $20.00 $20.00 $19.00 $19.00

*4” x 36” 1 ---- ---- $4.00 $4.00 $4.00

*4” x 36” 10 $58.00 $54.00 $36.00 $36.00 $36.00

*6” x 48” 1 ---- ---- $7.75 $7.75 $7.75

*6” x 48” 10 $110.00 $99.00 $72.00 $72.00 $72.00

6” x 60” 10 $159.00 $137.00 $137.00 $125.00 $125.00

6” x 80” 6 $108.00 $93.00 $93.00 $84.00 $84.00


*Sizes and grits usually in stock. All others allow for 2 to 3 weeks.

Belt Size Pkg, Qty. 40 50 60 80 100

6” x 89” 6 $118.00 $99.00 $99.00 $91.00 $91.00

6” x 108” 6 $137.00 $116.00 $116.00 $104.00 $104.00

6” x 264” 6 $325.00 $263.00 $254.00 $232.00 $232.00


To accurately measure belt size, cut old belt and measure the width & length

Your belt size

not listed?

Give us a call!

59Need a Special Size Belt? Call for a Quote!

*120 *150 180 *220 240 280 320 400 500 600

$21.50 $21.50 $21.50 $21.50 $21.50 $21.50 $21.50 $21.50 $21.50 $21.50

$20.00 $20.00 $20.00 $20.00 $20.00 $25.50 $25.50 $25.50 $25.50 $25.50

$25.00 $25.00 $25.00 $25.00 $25.00 $27.00 $27.00 $27.00 $27.00 $27.00

$1.90 $1.90 $1.90 $1.90 ---- ---- ---- ---- ---- ----

$17.00 $17.00 $17.00 $17.00 $17.00 $27.00 $27.00 $27.00 $27.00 $27.00

$2.00 $2.00 $2.00 $2.00 ---- ---- ---- ---- ---- ----

$18.00 $18.00 $18.00 $18.00 $18.00 $28.00 $28.00 $28.00 $28.00 $28.00

$2.25 $2.25 $2.25 $2.25 ---- ---- ---- ---- ---- ----

$20.00 $20.00 $20.00 $20.00 $20.00 $38.00 $38.00 $38.00 $38.00 $38.00

$30.00 $30.00 $30.00 $30.00 $30.00 $38.00 $38.00 $38.00 $38.00 $38.00

$2.25 $2.25 $2.25 $2.25 ---- ---- ---- ---- ---- ----

$20.00 $20.00 $20.00 $20.00 $20.00 $38.00 $38.00 $38.00 $38.00 $38.00

a tip from Paul...Did you know all these belts can run in EITHER direction?All the belts that are listed here are joined with a “Butt Splice”, in which the belt ends are butted together and joined by high strength tape on the underside of the joint. This allows the belt to run in either direction for greater belt life.

*120 *150 180 *220 240 280 320 400 500 600

$18.00 $18.00 $18.00 $18.00 $18.00 $20.00 $20.00 $20.00 $20.00 $20.00

$19.00 $19.00 $19.00 $19.00 $19.00 $24.50 $24.50 $24.50 $24.50 $24.50

$4.00 $4.00 $4.00 $4.00 ---- ---- ---- ---- ---- ----

$36.00 $36.00 $36.00 $36.00 $52.00 $52.00 $52.00 $52.00 $52.00 $52.00

$7.75 $7.75 $7.75 $7.75 ---- ---- ---- ---- ---- ----

$72.00 $72.00 $72.00 $72.00 $89.00 $89.00 $110.00 $110.00 $110.00 $110.00

$125.00 $125.00 $125.00 $125.00 $125.00 $125.00 $125.00 $125.00 $125.00 $125.00

$84.00 $84.00 $84.00 $84.00 $84.00 $84.00 $84.00 $84.00 ---- $84.00

Sanding Belts

120 150 180 220 240 280 320 400 500 600

$91.00 $91.00 $91.00 $91.00 $91.00 $91.00 $91.00 $91.00 ---- $91.00

$104.00 $104.00 $104.00 $104.00 $104.00 $104.00 $104.00 $104.00 ---- $104.00

$232.00 $232.00 $232.00 $232.00 $232.00 $232.00 $232.00 $232.00 ---- $232.00

Belt Size Pkg, Qty. 40 50 60 80 100

6” x 89” 6 $118.00 $99.00 $99.00 $91.00 $91.00

6” x 108” 6 $137.00 $116.00 $116.00 $104.00 $104.00

6” x 264” 6 $325.00 $263.00 $254.00 $232.00 $232.00

60

Graphite ClothUse this heavy canvas backed graphite on the platen of your sander (the flat part of your sander, covered by a belt and used as a work area). The slippery surface of the graphite greatly reduces the friction causing heat build up and will also decrease the drag on your belt sander motor and bearings. We provide extra long pieces that can be easily cut to fit any sander. Pads can be attached with double faced tape, contact cement, spray adhesive, or screwed in place. Graphite cloth is usually difficult to find, but we always have this in stock for you! Order some and try it out.

Sanding Belt Accessories

Item # Size Price

GR0409 4” x 9” (portable sanders) $5.99

GR0413 4” x 13” (4” x 36” belt sander) $7.99

GR0436 4” x 1yd $11.99

GR0620 6” x 20” (6” x 48” belt sander) $11.99

GR0636 6” x 1yd $19.99

Abrasive Cleaning BlockEventually all belts go dull, but with the use of a cleaner you will greatly extend their life by removing some of the dust and varnish that plug them prematurely. To use this 2”x2”x8” crepe block, push cleaner over belt or disc as it is turning. One block will last a very long time with normal use. A must for EVERY workshop.

Item # Item Description Price

Z00010 Abrasive Cleaning Block $10.95

Z00015 Belt Dressing Lubricant $15.00

Belt Dressing LubricantThis grease stick is recommended for all belt polishing operations - on all metals plastics and glass. It is great for sharpening and shaping knives and chisels, as it will help reduce heat caused by friction on their fine edges. When applied to the belt, the grease spreads out thinly and remains wet on the belt, while providing lubrication by penetrating the coated abrasive surface. It will extend the life of the belt by preventing clogging while leaving the abrasive grit free to cut cleanly and smoothly.

a tip from Paul... Belt Storage

Abrasives should be kept away from windows

and any direct heat source. They should not

be stored on concrete floors or near any area

of dampness. Ideal conditions for storage is at

a temperature range of 60*F to 80*F (or 18*C

to 26*C). High humidity may cause creasing,

loading and premature grit loss, while low

humidity may cause product brittleness and

lack of flexibility. Belts can be stored in original

plastic wrap until ready for use or sealed in an

airtight container.

Get the most value for your Sanding Belt investment

10 lb. Bargain Box Sandpaper

You’ll want to keep a box of this in your shop! Industrial quality Klingspor sandpapers - ends of rolls, overruns - each box contains a mix of grits in coarse, medium & fine.

Item # Item Description Price

Z00020 10 lb.Bargain Box $29.95

New

61Toll Free Ordering 1-877-287-5017

Sanding Accessories

---Bulk package contains ONE grit only--- Item # Grit 1pc. Bulk 10pc.

Z10301 Maroon- Coarse $1.49 $14.00Z10302 Grey- Medium $1.49 $14.00Z10303 Green- Fine $1.49 $14.00Z10304 White- Non-abrasive $1.49 $14.00

Hi-Flex padsThese 4-1/2” x 5-1/2” x 3/16” very flexible pads are some of the newest and best quality foam sanding pads on the market. They are made from dense foam and evenly coated on one side with Aluminum Oxide grit. This makes for an extremely long lasting pad that is very flexible for finish sanding on contoured parts and profiles.

Item # Grit 1pc. Bulk 10pc.Z10105 60 $1.25 $11.99Z10107 100 $1.25 $11.99Z10110 180 $1.25 $11.99Z10111 220 $1.25 $11.99

---Bulk package contains ONE grit only---

Dual Grit Sanding Sponge4”x2-3/4”x1” high quality sanding sponges are washable, reusable and are effective in sanding gentle contoured surfaces or flat areas. Convenient two grits on each sponge.

Item # Grit 1pc Bulk 10pc.Z10021 Med/Fine $1.89 $15.99Z10022 Med/Coarse $1.89 $15.99

---Bulk package contains ONE

Sandflex Block3”x2”x3/4” A semi-flexible rubber compound with grit through-out. This Klingspor block has had experts talking for years. It’s great for cleaning up woodworking machinery table tops, cleaning rust and scale from chisels, carving tools, saw blades, and much more. Make your tools shine like new again! Available in 3 grits.

Item # Grit Price EachZ10205 Coarse 60g $7.49Z10207 Medium 120g $7.49Z10212 Fine 240g $7.49Z10220 1 of each $21.00

Surface Conditioning Hand PadsDesigned to replace steel wool, these synthetic pads have excellent durability and are available in 3 grits and one super finisher. These pads will not break down and leave fibres or damaging pieces of iron on your work piece. Great for in between coat sanding and for wax finishes.

62

Introductory Wood Kit1 - 3”x4” sheet each of 9 Micro-Mesh Regular grades - 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, & 12000, a 3”x3” foam block and instructions.

Mac Mops

Online Demos - www.stockroomsupply.com

Item Number Description Available 80, 120, 180, 240

MAC072 7” X 2” Mac Mop $52.00

Long Life Tungsten Carbide Tools

1/8” dia. Shaft High Speed (35,000 rpm) Rotary Tools:1. Shaping Wheel 2. Pointed Burr 3. Asprin Tip

4. Conical Tip 5. Flat Tip 6. Round Tip 7. Ball Tip8. Hollow Tip 9. Cutting Wheel

Visit our website for prices and listing of all DuraGrit products and kits.

A very popular Klingspor profile sander, this wheel consists of hundreds of small abrasive strips bonded to a strong epoxy core. Typical applications include the sanding of turned wood parts, scuff sanding of sealer coats, satin finishing of metal parts, mold sanding and sanding of virtually any profile.

7” Mac Mop - Spindle Mount

Item Number Description 80, 100, 120 150, 180, 240

MAC102 10” X 2” Mac Mop $134.00 $167.00

MAC104 10” X 4” Mac Mop $245.00 $295.00

*MACPL Mounting Plates for 10” Mac Mop $19.00 per pair ---

10” Mac Mop - Spindle Mount

This mop has a 1/4” spindle. No mounting plates are required.

The 10” Mac Mop should be mounted onto stationary machines with motors ranging from 1/2 hp to 3 hp and shafts of at least 1/2” in diameter. Ideal speeds are between 1,100 and 2,500 rpm and should not exceed 3,400 rpm. Mounting Plates are sold separately and are required for your first Mac Mop purchase. Arbour hole needs to be specified.

* Arbour hole must be specified - 1/2”, 5/8”, 3/4”, 1-1/4”, 2”

A high quality product for super fine finishing. Micro-Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grits range from 1500 up to 12000. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye. Micro-Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop while using the series.

2” x 2” Soft Touch pad variety pack

1 pad each (double sided) of 9 Micro-Mesh Regular grades. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, & 12000. Outstanding product for pen turners.

Item # Description PriceMS001 Introductory Wood Kit 18.99

MS002 2”x2” Soft Touch Pad Variety 18.99

Micro-Mesh Products

63“FREE SHIPPING” within Canada and USA on orders over $200.

Mini MopsMade from the same outstanding gold material as the Sanding Mop, the Mini Mop is an innovative accessory

designed specifically for high speed rotary tools. This small interlocking flexible

sander will work well with speeds up to 25,000 rpm but works best at 12,000 rpm. With its small diameter and

non-loading stearate coated cloth, this product works very well for wood working and metal working applications.•• maintains detail•• antique furniture restoration•• paint stripping on mouldings•• sanding carvings and turnings•• removes clear coat, oxide and rust•• blends in scratches


MM2000G 1” Mini Mop Kit $18.00

MM1000Mini Mop Mandrel

1/8” shaft(not shown)

$4.00

Mini Mop KitsAvailable in 1” size, each kit includes a mandrel and 2 discs each in 120 grit, 220 grit and 320 grit.

Mini Mop RefillsRefills are packaged with one grit per package. Package quantities as listed below. All sizes of Mini Mops fit the same mandrel.

Item # Description Pkg Qty Price Item # Pkg Qty Description Price

MM2008G 1” Mini Mop Refill - 120g 5 $14.00 MM2108G 25 1” Mini Mop

Refill - 120g $45.00


Refill - 220g $45.00


Refill - 320g $45.00

MM3008G 1-1/2” Mini Mop Refill - 120g 4 $14.00 MM3108G 25 1-1/2” Mini Mop

Refill - 120g $45.00


Refill - 220g $49.00


Refill - 320g $49.00

MM3040G Any 3 Packages of Refills --- $35.00 --- --- --- ---

Bulk

Works great on metal for...- preparation for buffing- removing clear coat, oxide, and rust- maintaining detail- blending in scratches

a tip from Paul...A 1” Mini Mop is best used on a small, variable speed rotary

tool (ie: Dremel) being run at half speed, while 1-1/2” Mini

Mops are best used in larger variable speed rotary tools (ie:

Foredom) being run at half speed.

a tip from Paul...As with the Sanding mops, Mini Mops need

to be broken in before use. Hold the Mini

Mop into a scrap piece of wood just long

enough for the sandpaper to soften. This

will assist in maintaining the detail of your

piece.

64

Cup / Finishing WashersThis little trim washer sits under the head of a regular wood screw. Not only does it look better, but it increases the holding power.

Item # Size 1 box (100 pc) 5 boxes (per box) 10 boxes (per box)

HW0600 #6 $3.10 $2.80 $2.50

HW0800 #8 $3.90 $3.60 $3.25

HW1000 #10 $5.45 $4.95 $4.45

Square Socket Driver BitsA Canadian made premium, high quality, one piece driver bit.

Item # Description Price Each 10 pc

HB1200 Square Driver Bit#1 x 2” $1.79 $15.00

HB2200 Square Driver Bit#2 x 2” $1.79 $15.00

Pocket / Jig ScrewsThese screws have tremendous holding power and have a self tapping wood auger tip that virtually eliminates splitting the wood.

Item # Description 1 box(100 pc)

5 boxes(per box)

10 boxes(per box)

Bulk(1000 pcs)

HPF125 Fine Pocket Screws1-1/4” $3.30 $3.10 $2.90 $21.95

HPC125Coarse Pocket

Screws1-1/4”

$3.80 $3.60 $3.40 $25.95

Cutting Tip Wood ScrewsThese screws are much like the Jig screws except with a tapered head. The cutting tip prevents wood from splitting and makes possible easy driving into hardwood and particleboard.


Wood Screws

Find supplies for your buffing hobby online at www.stockroomsupply.com Stockroom Supply carries buffing wheels and buffing compounds.

1” 1-1/4” 1-1/2” 1-3/4” 2”Item # HST08125 HST08125 HST08150 HST08175 HST08200

#8 1 box(100 pc)

$3.00 $3.40 $3.80 $4.50 $5.00

#8 5 boxes(per box)

$2.75 $3.10 $3.45 $4.10 $4.55

#8 10 boxes(per box)

$2.50 $2.80 $3.10 $3.70 $4.10

Buffing

65

1/2” 5/8” 3/4” 1” 1-1/4” 1-1/2” 1-3/4” 2”Item # HWS04050 HWS04058 HWS04075 HWS04100 HWS04125 --- --- ---

#4 1 box(100 pc)

$2.50 $2.65 $2.70 $3.35 $3.75 --- --- ---

#4 5 boxes(per box)

$2.25 $2.40 $2.45 $3.05 $3.40 --- --- ---


$2.00 $2.15 $2.20 $2.75 $3.05 --- --- ---

Item # HWS05050 HWS05058 HWS05075 HWS05100 HWS05125 --- --- ---

#5 1 box(100 pc)

$2.60 $2.65 $2.75 $3.00 $3.65 --- --- ---

#5 5 boxes(per box)

$2.40 $2.45 $2.50 $2.75 $3.30 --- --- ---


$2.15 $2.20 $2.25 $2.50 $3.00 --- --- ---

Item # HWS06050 HWS06058 HWS06075 HWS06100 HWS06125 HWS06150 HWS06175 HWS06200

#6 1 box(100 pc)

$2.65 $2.75 $2.75 $2.95 $3.30 $3.80 $4.50 $4.90

#6 5 boxes(per box)

$2.40 $2.50 $2.50 $2.70 $3.00 $3.45 $4.10 $4.45


$2.15 $2.25 $2.25 $2.45 $2.70 $3.15 $3.70 $4.00

Square Socket Drive Zinc Plated Wood ScrewsThe square drive head on wood screws has been one of the most useful inventions in the woodworking industry. The square drive system prevents the driver from slipping or stripping under the highest torques. These are very good quality screws with extra deep thread for maximum holding power. 100 pc per box.

Wood Screws


Mix & Match Wood Screws / Pocket Screws & Washers for 5 and 10 box discounts

3/4” 1” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/2” 3” 4”Item # HWS08075 HWS08100 HWS08112 HWS08150 HWS08175 HWS08200 HWS08250 HWS08300 HWS08400

#8 1 box(100 pc)

$2.80 $3.10 $3.40 $3.75 $4.50 $5.00 $6.55 $8.15 $17.50

#8 5 boxes(per box)

$2.55 $2.85 $3.10 $3.40 $4.10 $4.55 $6.00 $7.40 $15.95


$2.30 $2.55 $2.80 $3.10 $3.70 $4.10 $5.40 $6.70 $14.40

Item # HWS10075 HWS10100 HWS10125 HWS10150 HWS10175 HWS10200 HWS10250 HWS10300 HWS10400

#10 1 box(100 pc)

--- --- $4.20 $4.65 $5.25 $6.25 $8.65 $9.90 $20.50


--- --- $3.80 $4.25 $4.75 $5.70 $7.90 $9.00 $18.65


--- --- $3.40 $3.80 $4.30 $5.15 $7.10 $8.10 $16.80

Due to the slip of a screwdriver and a cut to his hand, P.L. Robertson was inspired to invent the square-head or “Robertson” woodscrew. Robertson was born and raised in Haldimand County, interestingly, just minutes

from Stockroom Supply. He invented the screw in 1908 and was often heard to say “it was the biggest little invention of the twentieth century”. We are proud of this Canadian inventor!

Fact: 85% of the wood screws sold in Canada are Robertson, while only 10% of the woodscrews sold in the US are Robertson.

Item # Description 1 box(100 pc)

5 boxes(per box)

10 boxes(per box)

Bulk(1000 pcs)

HPF125 Fine Pocket Screws1-1/4” $3.30 $3.10 $2.90 $21.95

HPC125Coarse Pocket

Screws1-1/4”

$3.80 $3.60 $3.40 $25.95

66

The Little RIPPER

$

$

$ $$ $

$$

$

$

$$ $

Cost BenefitOne of the big concerns for wood workers when buying a new tool is the cost. Not only does The Little Ripper allow you to set up your own sawmill for under $500.00 (if you already own a bandsaw), it is going to save you a substantial amount of money. Let’s face it, wood is expensive. Even the most common pine and maple can add up before you know it. We won’t even mention the exotic woods! With the price of wood today, wouldn’t it be nice to have something to offset the cost a little? Did you know - within 4 hours of using your Little Ripper to mill your own logs, you can have the entire unit paid off with the custom wood you have created. Now that is an affordable tool!

Features • Use Common yard trees (i.e. Lilac, Crab Apple, Birch) in your projects• .Logs, burls, and crotch wood gripped securely• .Adjusts to become a taper jig• .5/8” 3tpi blade cuts wet and green wood• .Cut quarter-sawn lumber and book matched boards• .Adapts to many shop tools (works in any ¾” x 3/8” mitre slot)• .Accessories increase log capacity to 14” diameter and 50” length

Visit our website for online demos

Have you ever wondered what treasures lay waiting to be discovered in the firewood pile, or dreamed about building something out of that special apple tree in the backyard?

The problem most likely hasn’t been figuring out WHAT you would do with it, but figuring out HOW. R.B.F. Tool Company has just solved this problem for you by creating something they like to call “The Little Ripper”.

The Little Ripper is a mini-sawmill that will fit on any bandsaw and allow you to mill almost any logs into boards, all while working in the comfort

of your own workshop. Designed specifically with the craftsman in mind, this new and innovative product is not only affordable, but it is also one of the safest applications for your bandsaw. One distinct quality of this tool is that is serves a dual purpose.

Simply by turning this jig 180 degrees you have transformed your mini-sawmill into a valuable fence. The Little Ripper is an essential

and practical tool for every workshop.

Part # Length Width TPI PriceBL3/16-80-10 80 3/16" 10 $16.00BL1/4-80-4 80 1/4" 4 $16.00BL3/8-80-4 80 3/8" 4 $16.00BL1/2-80-3 80 1/2" 3 $16.00BL3/16-93-10 93 3/16" 10 $18.60BL1/4-93-4 93 1/4" 4 $18.60BL3/8-93-4 93 3/8" 4 $18.60BL1/2-93-3 93 1/2" 3 $18.60BL3/16-98-10 98 3/16" 10 $19.60BL1/4-98-4 98 1/4" 4 $19.60BL3/8-98-4 98 3/8" 4 $19.60BL1/2-98-4 98 1/2" 3 $19.60BL3/16-105-10 105 3/16" 10 $21.00BL1/4-105-4 105 1/4" 4 $21.00BL3/8-105-4 105 3/8" 4 $21.00BL1/2-105-3 105 1/2" 3 $21.00BL3/16-131.5-10 131-1/2 3/16" 10 $26.30BL1/4-131.5-4 131-1/2 1/4" 4 $26.30BL3/8-131.5-4 131-1/2 3/8" 4 $26.30BL1/2-131.5-3 131-1/2 1/2" 3 $26.30

See Little Ripper Prices and Little Ripper Blades on following page.

The Swedish Silicon band has three to four times the blade life of a normal industrial carbon band. They have a five tooth pattern with minimal set. Every fifth tooth is a straight raker, with a 6.5° hook angle that gives it an incredible fast cut and smooth finish.

Tufftooth®- Swedish Bandsaw Blades

80” Length - 12” Sears or General International 90-060

93” Length - 14” Delta, Steel City, Grizzly, General International 90-125, Sears Craftsman and most 14” imports

98” Length - Genteral International 90-150, Grizzly

131-1/2” - Most 17” Imports, General, Grizzly

105” Length - 14” Imports, Delta, Steel City, General 90-125 with height extension

67

The Little RIPPER The Little RipperThe Little Ripper is a Canadian-made product which is simple and easy to use. It holds a log securely in place while you guide it through a bandsaw blade. This jig is a must for anyone who enjoys the challenge of seeing a project through from beginning to end, especially the hobbyist who wants to build a project with wood not available at their local wood supplier.

Height Extension •• Attaches to the back of the Ripper •• Increases capacity of log size up to 14” diameter •• Can be used as a jointer for two Little Ripper Units (either size)

Bandsaw BladesWhen re-sawing or cutting straight, we recommend the use of these new 5/8” Tungsten Impregnated Silicone Blades. They will make the cut cleaner and faster than normal bandsaw blades. They come in different sizes to fit your bandsaw. Please specify what size you need when ordering. •• extra hard •• stays sharp and cuts straight •• extra wide to add stiffness to blade •• extremely smooth, thin kerf •• 3 tpiwhen used with high performance package (balanced pulleys and linkbelt), blade will be fast cutting and smoother finish will result

We bring you woodworking’s newest innovative products

Item Number Description Price

RBF1000 The Little Ripper 14” $219.00

RBF1010 Height Extension 14” $60.00

BL50893 5/8” Tungsten Silicon Blade – 93” $36.00

BL58105 5/8” Tungsten Silicone Blade – 105” $36.00

Use as amini sawmill

Turn it around and use it as a fence

Item(s) Maximum Diameter Maximum Length

Little Ripper 8” 24”

Little Ripper with Height Extension 14” 24”

Log Capacity Chart

68

53032 Perry Rd. Wainfleet, ON Canada

L0S 1V0

3818691

AddressedAdmail

Médiaposte avec adresse

www.stockroomsupply.com1-877-287-5017

V-DrumSander pg 7

WoodScrews pg 33

MouldingSander pg 19

SandingMops pg 16

Hook &Loop Discs pg 21

Roto Raspa pg 19

FeatherWheels pg 11

LittleRipper pg 34

stockroom’s · pdf file4 1. why am i getting chatter marks? usually this means your drum...

Documents