study & evaluation scheme of master of technology...

M.Tech (ME- Thermal) Revised Syllabus Applicable w.e.f. Academic Session 2011-12(22022012) of 43

Study & Evaluation Scheme of

Master of Technology

Mechanical Engineering (Specialization in Thermal Engineering)

[Applicable w.e.f. Academic Session 2011-12 till revised]

TEERTHANKER MAHAVEER UNIVERSITY N.H.-24, Delhi Road, Moradabad, Uttar Pradesh-244001

Website: www.tmu.ac.in


TTEEEERRTTHHAANNKKEERR MMAAHHAAVVEEEERR UUNNIIVVEERRSSIITTYY

((EEssttaabblliisshheedd uunnddeerr GGoovvtt.. ooff UU.. PP.. AAcctt NNoo.. 3300,, 22000088))

DDeellhhii RRooaadd,, BBaaggaarrppuurr,, MMoorraaddaabbaadd ((UU..PP))

Study & Evaluation Scheme

Master of Technology SUMMARY

Programme : M.Tech (Mechanical Engineering-Thermal Engineering)

Duration : Two years Regular (Four Semesters)

Medium : English

Minimum Required Attendance : 75 %

Credits :

Maximum Credits : 78 Minimum credits required for : 74

Degree

Assessment (Theory Papers) : Internal External Total

30 70 100

Internal Evaluation (Theory

Papers) :

1st Class

Test

2nd Class

Test

3rd Class

Test Assignment

(S)

Other

Activity Including

attendance

Total Best two of the three

class tests shall be

considered

10

Marks

10

Marks

10

Marks

5 Marks 5 Marks 30

Marks

Evaluation of Practical /Thesis

: Internal External Total

50 50 100

Evaluation of Thesis

:

Internal External Total

Guide RC 50 100

25 25

Duration of Examination :

External Internal

3 hrs. 1 ½ hrs

To qualify the course a student is required to secure a minimum of 40 % marks in aggregate including

the semester end examination and teachers continuous evaluation.(i.e. both internal and external).

A candidate who secures less than 40% marks in a course shall be deemed to have failed in that

course. In case a student has secured more than 40% marks in each course, but less than 50% in

aggregate in a semester, he/she shall re-appear in courses where the marks are less than 50% to achieve

the required aggregate percentage of 50% in the semester. The student must secure the prescribed minimum credits to be eligible for the award of degree. However he/she must have appeared in all

papers.

Question Paper Structure 1. The question paper shall consist of eight questions, out of which first question shall be of short answer type (not exceeding 50 words) and will be compulsory. Question No. 1 shall contain 8 parts representing all units of the

syllabus and students shall have to answer any five (weight age 4 marks each of them). 2. Out of the remaining seven questions, a student shall be required to attempt any five questions. There will be minimum one and maximum two questions from each unit of the syllabus. The weight age of Question No. 2 to 8

shall be 10 marks each.


Study & Evaluation Scheme

Programme: M.Tech.

(Mechanical Engineering-Thermal Engineering)

SEMESTER I

SEMESTER II

S.N. Subject Code

Subject Periods Credits Evaluation Scheme

L T P Internal External Total

1 MAS101 Optimization and

Numerical Technique 3 2 - 4 30 70 100

2 MME 101 Advanced Heat Transfer 3 2 - 4 30 70 100 3 MME 102 Advanced

Thermodynamics 3 2 - 4 30 70 100

4 MME151 Heat Transfer Lab - - 4 2 50 50 100

5 MME 191 Seminar - - 4 2 50 50 100

Total 9 6 8 16 190 310 500

S.N. Subject

Code



1 MME 201 Experimental Method in

Thermal Engineering 3 2 - 4 30 70 100

2 MME 202 Viscous Fluid Flow 3 2 - 4 30 70 100 3 MME203 Radiation and

Conduction Heat

Transfer

3 2 - 4 30 70 100

4 MME 204 Convective Heat and

Mass Transfer 3 2 - 4 30 70 100

5 MME 205 Materials, Manufacturing and

Testing of Engines

3 2 - 4 30 70 100

6 MME 251 Experimental Method in

Thermal Engineering

(Lab)

- - 4 2 50 50 100

7 MME 291

Seminar - - 4 2 50 50 100

Total 15 10 8 24 250 450 700


SEMESTER III

SEMESTER IV

S.N. Subject

Code



1 MHM 301 Industrial

Management and

Research

Methodology

3 2 - 4 30 70 100

2 MME 301 Refrigeration and

Air Conditioning

Technologies

3 2 - 4 30 70 100

3 MME 303 Heat Exchangers 3 2 - 4 30 70 100

4 MME 304 Computational Heat

Transfer 3 2 - 4 30 70 100

5 MME 351 Refrigeration and

Air Conditioning

Technologies Lab

- - 4 2 50 50 100

6 MME391 Minor project - - 4 2 50 50 100

7 MME 399 Project Work Phase-1

(Synopsis and

Presentation)

- - 12 6 50 50 100

Total 12 8 20 26 270 430 700

S.N. Subject

Code



1 MME 499 Project Work Phase II

(Dissertation and

Presentation)

- - - 12 50 50 100

Total - - - 12 50 50 100


M.Tech Mechanical Engineering (Thermal)

Semester - I

OPTIMIZATION WITH NUMERICAL TECHNIQUES

COURSE CODE: MAS 101 L-3, T-2, P-0, C-4

OBJECTIVE: To develop the ability to use the techniques of Operations Research for

various applications like bisection method, Solutions of system of Linear equations etc.

Unit-1 Introduction: Algebraic Structures: Properties, Semi group, Monoid, Group,

Abelian group, properties of group, Subgroup, Cyclic group, Cosets, Permutation groups,

Homomorphism, Isomorphism and Automorphism of groups.

Solution of Algebraic and Transcendental Equation:

Bisection Method, Iteration method, Method of false position, Newton-Raphson method,

Methods of finding complex roots, Muller’s method, Rate of convergence of Iterative

methods, Polynomial Equations. (Lectures 09)

Unit-2 Simultaneous Linear Equations: Solutions of system of Linear equations, Gauss

Elimination direct method and pivoting, Gauss Seidal iterative method, Rate of Convergence

Solution of differential Equations: Picard’s Method, Euler’s Method, Taylor’s Method,

Runge-Kutta Methods, Predictor Corrector Methods. (Lectures 09)

Unit 3 Graphs, sub-graphs, some basic properties, Walks, Path & circuits, Connected graphs,

Disconnected graphs and component, Eular and Hamiltonian graphs, Various operation on

graphs, Tree and fundamental circuits, Distance diameters, Radius and pendent vertices,

Rooted and binary trees, Counting trees, Spanning trees, Finding all spanning trees of a graph

and a weighted graph. (Lectures 09)

Unit 4 Cut-sets and cut vertices, some properties, All cut sets in a graph, Fundamental circuit

and cut sets, Connectivity and seperatability, Network flows, min cut theorem, Planar graphs, Combinatorial and geometric dual, Kuratowski to graph detection of planarity, Geometric

dual, Some more criterion of planarity, Thickness and Crossings. (Lectures 09)

Unit 5 Optimization Techniques: Transportations, Assignments, Game Theory, Optimal solution of two persons zero sum games, Solution of mixed strategy games. (Lectures 09)

TOTAL (L – 45 + T – 15): 60 PERIODS

TEXT BOOK

1. Introduction to operation Research TMH FREDERICK S. HILLIER, Stanford University

GERALD J. LIEBERMAN

REFERENCE BOOKS:

1. Optimization Theory and Application: S.S.Rao.

2. Operations Research – S.D.Sarma.


Semester - I

ADVANCED HEAT TRANSFER

Course Code: MME101 L-3, T-2, P-0, C-4

OBJECTIVE:

• To develop the ability to use the heat transfer concepts for various applications like finned systems, turbulence flows, high speed flows.

• To analyze the thermal analysis and sizing of heat exchangers and to learn the heat transfer coefficient for compact heat exchanges.

• To achieve an understanding of the basic concepts of phase change processes and mass transfer.

UNIT – I

CONDUCTION AND RADIATION HEAT TRANSFER One dimensional energy equations and boundary condition - three-dimensional heat

conduction equations - extended surface heat transfer - conduction with moving boundaries - radiation in gases and vapour. Gas radiation and radiation heat transfer in enclosures

containing absorbing and emitting media – interaction of radiation with conduction and

convection. (Lectures: 09)

UNIT – II

TURBULENT FORCED CONVECTIVE HEAT TRANSFER

Momentum and energy equations - turbulent boundary layer heat transfer - mixing length

concept - turbulence model – k Є model - analogy between heat and momentum transfer –

Reynolds, Colburn, Prandtl turbulent flow in a tube - high speed flows. (Lectures: 09)

UNIT – III

PHASE CHANGE HEAT TRANSFER AND HEAT EXCHANGER

Condensation -filmwise and dropwise- boiling – pool and flow boiling - heat exchanger -Є –

NTU and LMTD approach and design procedure - compact heat exchangers. (Lectures: 09)

UNIT - IV

NUMERICAL METHODS IN HEAT TRANSFER

Finite difference formulation of steady and transient heat conduction problems – discretization schemes – explicit. (Lectures: 09)

UNIT – V

CRANK NICOLSON METHOD

Crank Nicolson and fully implicit schemes - control volume formulation -steady one-

dimensional convection and diffusion problems. (Lectures: 09)


TEXT BOOKS:

1. Incropera F.P. and DeWitt. D.P., Fundamentals of Heat & Mass Transfer,

John Wiley & Sons.


2. Holman.J.P, Heat Transfer, Tata Mc Graw Hill.

REFERENCES:

1. Ozisik. M.N., Heat Transfer – A Basic Approach, McGraw-Hill Co.

2. Nag.P.K, Heat Transfer, Tata McGraw-Hill.

3. Ghoshdastidar. P.S., Heat Transfer, Oxford University Press.

4. Yadav, R., Heat and Mass Transfer, Central Publishing House.


Semester - I

ADVANCED THERMODYNAMICS


OBJECTIVE :

• To achieve an understanding of basic principle and scope of thermodynamics.

• To predict the availability and irreversibility associated with the thermodynamic

processes.

• To analyze the properties of ideal and real gas mixtures and to understand the basic

concepts of fuel and combustions

UNIT – I

AVAILABILITY ANALYSIS AND THERMODYNAMIC PROPERTY RELATIONS

Review of laws of Thermodynamics, Reversible work, Availability, Irreversibility and

Second-Law Efficiency for a closed System and Steady-State Control Volume. Availability

Analysis of Simple Cycles. Thermodynamic Potentials, Maxwell relations, Generalised

relations for changes in Entropy, Internal Energy and Enthalpy, Generalised Relations for Cp

and Cv, Clausius Clayperon Equation, Joule-Thomson Coefficient, Bridgman Tables for

Thermodynamic relations. (Lectures: 09)

UNIT – II REAL GAS BEHAVIOUR- Different Equations of State, Fugacity, Compressibility,

Principle of Corresponding States, Use of generalized charts for enthalpy and entropy departure, fugacity coefficient, Lee-Kesler generalized three parameter tables. (Lectures: 09)

UNIT – III

Properties of Gaseous Mixture- Fundamental property relations for systems of variable composition, partial molar properties, Real gas mixtures, Ideal solution of real gases and

liquids, Activity, Equilibrium in multi phase systems, Gibbs phase rule for non-reactive

components. Thermo chemistry, First Law analysis of reacting systems, Adiabatic Flame

temperature. (Lectures: 09)

UNIT – IV

STATISTICAL THERMODYNAMICS- Microstates and Macrostates, Thermodynamic

probability, Degeneracy of energy levels, Maxwell-Boltzman, Fermi-Dirac and Bose-Einstein

Statistics, Microscopic Interpretation of heat and work, Evaluation of entropy, Partition

function, Calculation of the Macroscopic properties from partition functions. (Lectures: 09)

UNIT – V

IRREVERSIBLE THERMODYNAMICS- Conjugate Fluxes and Forces, Entropy

Production Onsager’s Reciprocity relations, Thermo-electric phenomena, formulations.

(Lectures: 09)

TOTAL (Lecture 45 + Tutorial 15) 60 PERIODS

TEXT BOOKS:

1. Holman,J.P., Thermodynamics, McGraw-Hill Inc. 2. Sonntag, R.E., and Van Wylen, G, Introduction to Thermodynamics, Classical and

Statistical, Third Edition, John Wiley and Sons. 3. Nag P.K., Engineering Thermodynamics.


REFERENCE BOOKS :

1. Kenneth Wark Jr., Advanced Thermodynamics for Engineers, McGraw-Hill Inc.

2. Bejan, A., Advanced Engineering Thermodynamics, John Wiley and Sons.

3. Smith, J.M. and Van Ness., H.C., Introduction to Chemical Engineering

Thermodynamics, Fourth Edition, McGraw-Hill Inc.

4. Sears, F.W. and Salinger G.I., Thermodynamics, Kinetic Theory and Statistical

Thermodynamics, Third Edition, Narosa Publishing House, New Delhi. 5. DeHotf, R.T., Thermodynamics in Materials Science, McGraw-Hill Inc.

6. Rao, Y.V.C., Postulational and Statistical Thermodynamics, Allied Publisher Limited, New Delhi.

7. Oberai M.M. and Srikantiah G., A First Course in Thermodynamics, PHI, Private Ltd., New Delhi.


Semester - I

HEAT TRANSFER LAB

Course Code: MME 151 L-0, T-0, P-4, C-2

LIST OF EXPERIMENTS 1. Conduction-composite wall experiment.

2. Conduction-composite cylinder experiment.

3. Convection-pool boiling experiment.

4. Convection-experiment on heat transfer from tube natural correction.

5. Convection-heat pipe experiment.

6. Convection-heat transfer through fin-natural convection.

7. Convection-heat transfer through tube/fin-forced convection.

8. Heat exchanger-parallel flow experiment.

9. Heat exchanger-counter flow experiment.

10. Conduction- determination of thermal conductivity of fluids.

Evaluation of Practical Examination:

Internal Evaluation (50 marks)

Each experiment would be evaluated by the faculty concerned on the date of the experiment

on a 5 point scale which would include the practical conducted by the students and a Viva taken by the faculty concerned. The marks shall be entered on the index sheet of the practical

file.

Evaluation scheme: PRACTICAL PERFORMANCE & VIVA

DURING THE SEMESTER (30 MARKS)

ATTENDANCE

(5 MARKS)

QUIZ

(5

MARKS)

VIVA

(10

MARKS)

TOTAL

INTERNAL

(50

MARKS)

EXPERIMENT

(10 MARKS)

FILE

WORK

(10

MARKS)

VIVA

(10

MARKS)

External Evaluation (50 marks)

The external evaluation would be done by the external faculty based on the experiment

conducted during the examination.


SEMINAR Course Code: MME191/291 L-0, T-0, P-4, C-2

Selection of topic:

All students pursuing M.Tech shall submit the proposed topic of the seminar in the first

week of the semester to the course coordinator. Care should be taken that the topic selected

does not directly relate to the subject of the courses being pursued or thesis work, if any.

The course coordinator shall then forward the list to the concerned department coordinators

who will vet the list and add some more topics in consultation with the faculty of the

department .The topics will then be allocated to the students along with the name of the

faculty guide.

Preparation of the seminar

1. The student shall meet the guide for the necessary guidance for the seminar work.

2. During the next two to four weeks the student should read the primary literature

germane to the seminar topic. Reading selection should continuously be informed to the

guide.

3. After necessary collection of data and literature survey, the students must prepare a

report. The report shall be arrange in the sequence consisting of the following:-

a. Top Sheet of transparent plastic.

b. Top cover.

c. Preliminary pages.

(i) Title page

(ii) Certification page.

(iii) Acknowledgment.

(iv) Abstract.

(v) Table of Content.

(vi) List of Figures and Tables.

(vii) Nomenclature.

d. Chapters (Main Material).

e. Appendices, If any.

f. Bibliography/ References.

g. Evaluation Form.

h. Back Cover (Blank sheet).

i. Back Sheet of Plastic (May be opaque or transparent).

1. Top Cover- The sampled top cover shall be as Under:


TITLE OF THE SEMINAR

NAME OF THE STUDENT WITH COURSE, STREAM, SEMESTER & SECTION.

Department of Mechanical Engineering

College of Engineering

Teerthanker Mahaveer University Moradabad-244001

(TMU LOGO)

MONTH AND YEAR

2. Title Page:- The Title Page cover shall be as Under:

Title of the seminar

M.Tech. Seminar (Submitted in Partial fulfillment of the requirement for the degree of

MASTER OF TECHNOLOGY In

MECHANICAL ENGINEERING by

Name of Student in capital Letters (Roll No.)

(TMU LOGO)

COLLEGE OF ENGINEERING

TEERTHANKER MAHAVEER UNIVERSITY

N.H. 24, BAGARPUR,

MORADABAD-244001

MONTH AND YEAR

Name of the college and University.

Month and Year


3. Certification page:- This shall be as under


College of Engineering Teerthanker Mahaveer University

Moradabad-244001

The seminar Report and Title “Topic of the Seminar.”

Submitted by Mr./Ms. (Name of the student) (Roll No.) may be accepted for being evaluated

Date Signature

Place (Name of guide)

For Guide If you Choose not to sign the acceptance certificate above, please indicate reasons

for the same from amongst those given below:

i) The amount of time and effort put in by the student is not sufficient;

ii) The amount of work put in by the student is not adequate;

iii) The report does not represent the actual work that was done / expected to be done;

iv) Any other objection (Please elaborate)

Abstract- A portion of the seminar evaluation will be based on the abstract. The abstract

will be evaluated according to the adherence to related technical field and according to the format described below.

The seminar abstract is an important record of the coverage of your topic and provides a valuable source of leading references for students. Accordingly, the abstract must serve as

an introduction to your seminar topic. The abstract will be limited to 500 words, excluding figures and tables (if any). The abstract will include references to the research

articles upon which the seminar is based as well as research articles that have served as key background material.

7. Evaluation Form:- Three sheets of evaluation form should be attached in the report as

under.

a. Evaluation form for guide and other Internal Examiner.

b. Evaluation form for external examiners.

c. Summary Sheet


9. Evaluation form for Guide & Internal Examiners:-

EVALUATION SHEET

(To be filled by the GUIDE & Internal Examiners only)

Name of Candidate:

Roll No :

Class and Section:

Please evaluate out of Five marks each.

S.

No.

Details Marks (5) Marks (5) Marks (5)

Guide Int. Exam. 1

Int. Exam. 2

1 OBJECTIVE IDENTIFIED & UNDERSTOOD

2

LITERATURE REVIEW / BACKGROUND

WORK

(Coverage, Organization, Critical review)

3 DISCUSSION/CONCLUSIONS

(Clarity, Exhaustive)

4 SLIDES/PRESENTATION SUBMITTED

(Readable, Adequate)

5 FREQUENCY OF INTERACTION ( Timely

submission, Interest shown, Depth, Attitude)

Total (Out of 25)

Average out of 50

Signature: Signature: Signature:

Date: Date: Date:


EVALUATION SHEET

(To be filled by the External Examiner only)

Name of Candidate:

Roll No :

Please evaluate out of Ten marks each.

S.No. Details Marks (10)


2


WORK




4 POWER POINT PRESENTATION

(Clear, Structured)

5 SLIDES


Total (Out of 50)

Signature:

Date:

EVALUATION SUMMARY SHEET

Name and Roll

No.

Internal

Examiners (50)

External

Examiner (50)

Total (100) Result

(Pass/Fail)

Note:- The summary sheet is to be completed for all students and the same shall also be

compiled for all students examined by External Examiner. The Format shall be provided by

the course coordinator.

General points for the seminar

a. The report should be typed on A4 sheet. The Paper should be of 70-90 GSM. b. Each page should have minimum margins as under

a. Left 1.5 inches

b. Right 0.5 Inches

c. Top 1 Inch

d. Bottom 1 Inch (Excluding Footer, If any)


c. The printing should be only on one side of the paper

d. The font for normal text should Times New Roman, 12 size for text and 14 size for

heading and should be typed in double space. The references may be printed in Italics

or in a different fonts.

e. The Total Report should not exceed 50 pages including top cover and blank pages.

f. A CD of the report should be pasted/attached on the bottom page of the report.

g. Similarly a hard copy of the presentation (Two slide per page) should be attached along with the report and a soft copy be included in the CD.

h. Three copies completed in all respect as given above is to be submitted to the guide. One copy will be kept in departmental/University Library, One will be return to the

student and third copy will be for the guide. i. The power point presentation should not exceed 30 minutes which include 10 minutes

for discussion/Viva.


Semester - II

EXPERIMENTAL METHODS IN THERMAL ENGINEERING


OBJECTIVE: To enhance the knowledge of students in the area of statistics and

instrumentation.

UNIT I (Lectures: 09)

Statistics: Distributions, estimators, confidence levels, sample size, test of hypothesis,

Goodness-of-fit test Chauvenet’s criteria

UNIT II (Lectures: 09)

Regression analysis, co-relations. Uncertainty analysis. Design of experiments.

UNIT III (Lectures: 09)

Instruments: Specifications. Static and dynamic characteristics.

UNIT IV (Lectures: 09)

Instruments for measuring distance, profile, pressure, temperature, velocity, flow rate, level,

speed, force, torque, noise, chemical analyses.

UNIT V (Lectures: 09)

Estimation of systematic errors. Signal conditioning, data acquisition and analysis.

Transducers, A-D & D-A convertors, interfacing with computers and PLCs.


Text Book:

1. Thermal Engineering byK. Soman

2. Thermal Engineering by R.K Rajput

Reference Books: 1. Thermal Engineering by Rudramoorthy

2. Advanced Computational Methods and Experiments in Heat Transfer by B. Sunden, U. Mander, C. A. Brebbia


Semester - II

VISCOUS FLUID FLOW Course Code: MME 202 L-3, T-2, P-0, C-4

OBJECTIVE: To enhance the knowledge about students of governing equations, Navier-

Stokes’ equations, Turbulent boundary layer.


Governing equations in differential form.


Navier-Stokes’ equations and applications.


Review of boundary layer prediction methods.


Transition and turbulence. Turbulent boundary layers. Drag on bodies.


Free turbulent flows. Turbulent boundary layer prediction methods.


Text Book

1. “Viscous fluid flow” by Tasos C. Papanastasiou, Georgios C. Georgiou, Andreas N. Alexander

2. “Viscous fluid flow” by Frank M. White

Reference Books:

1. “Theory and applications of viscous fluid flows” by Radyadour Kh. Zeytounian


Semester - II

RADIATION AND CONDUCTION HEAT TRANSFER


OBJECTIVE: To enhance the knowledge of students in the area of Radiative properties,

Radiation measurement, conduction through isotropic, orthotropic and Anisotropic material.


Radiation: Recapitulation. Radiative properties of opaque surfaces.Configuration factors.

Enclosure analysis for diffuse-gray surfaces and non-diffuse non-gray surfaces.


Radiation in absorbing, emitting and scattering media. Engineering treatment of gas radiation

in enclosures. Radiation measurements.


Conduction: Recapitulation, 3-D conduction, isotropic, orthotropic and anisotropic solids.

Mathematical formulation, analytical solutions, variation of parameters, integral method,

periodic boundary conditions.


Duhamel’s theorem and Green’s function. Stationary and moving heat sources and sinks. Moving boundary problems. Inverse heat conduction problems. Micro scale heat transfer. Bio

heat transfer.

UNIT V (Lectures: 09) Combined mode heat transfer, integro-differential equations, introduction to Monte Carlo

technique.


Text Books:

Radiation heat transfer by J. R. Mahan

Radiative heat transfer by Michael F. Modest

Reference Books:

Heat Transfer in Process Engineering by Eduardo Cao


Semester - II

CONVECTIVE HEAT & MASS TRANSFER


UNIT-1 Introduction to Heat Transfer: Concepts of the mechanisms of heat flows; Conduction,

convection and radiation; Effect of temperature on thermal conductivity of materials;

Introduction to combined heat transfer mechanism.

Conduction:

One-dimensional general differential heat conduction equation in the rectangular,

cylindrical and spherical coordinate systems; Initial and boundary conditions.

Steady State one-dimensional Heat conduction:

Composite Systems in rectangular, cylindrical and spherical coordinates with and

without energy generation; Thermal resistance concept; Analogy between heat and

electricity flow; Thermal contact resistance; Critical thickness of insulation. (Lectures: 09)

UNIT-2

Fins:

Heat transfer from extended surfaces, Fins of uniform cross-sectional area; Errors of measurement of temperature in thermometer walls.

Transient Conduction: Transient heat conduction; Lumped capacitance method; Time constant;

Unsteady state heat conduction in one dimension only, Heisler charts. (Lectures: 09)

UNIT-3

Forced Convection:

Basic concepts; Hydrodynamic boundary layer; Thermal boundary layer;

Approximate integral boundary layer analysis; Analogy between momentum and heat

transfer in turbulent flow over a flat surface; Mixed boundary layer; Flow over a flat

plate; Flow across a single cylinder and a sphere; Flow inside ducts; Empirical heat

transfer relations; Relation between fluid friction and heat transfer; Liquid metal heat

transfer.

Natural Convection:

Physical mechanism of natural convection; Buoyant force; Empirical heat transfer

relations for natural convection over vertical planes and cylinders, horizontal plates and

cylinders, and sphere ; Combined free and forced convection. (Lectures: 09)

UNIT-4

Thermal Radiation :

Basic radiation concepts; Radiation properties of surfaces; Black body radiation

Planck’s law, Wein’s displacement law, Stefan Boltzmann law, Kirchoff’s law; ; Gray body; Shape factor; Black-body radiation; Radiation exchange between diffuse non black

bodies in an enclosure; Radiation shields; Radiation combined with conduction and convection; Absorption and emission in gaseous medium; Solar radiation; Green house

effect. (Lectures: 09)


UNIT-5

Heat Exchanger :

Types of heat exchangers; Fouling factors; Overall heat transfer coefficient;

Logarithmic mean temperature difference (LMTD) method; Effectiveness-NTU method;

Compact heat exchangers.

Condensation And Boiling :

Introduction to condensation phenomena; Heat transfer relations for laminar film condensation on vertical surfaces and on outside & inside of a horizontal tube; Effect of

non-condensable gases; Dropwise condensation; Heat pipes; Boiling modes, pool boiling; Hysteresis in boiling curve; Forced convective boiling.

Introduction To Mass Transfer : Introduction; Fick’s law of diffusion; Steady state equimolar counter diffusion;

Steady state diffusion through a stagnant gas film.

Text Books: 1. Elements of Heat transfer by Bayazitouglu & Ozisik, McGraw-Hill Book Company.

2. Heat Transfer By J.P. Holman, McGraw-Hill International edition.

3. Schaum’s outline of Heat Transfer by Pitts & Sisson McGraw-Hill International edition.

4. Principles of Heat Transfer by Frank Kreith, McGraw-Hill Book co.

5. Fundamentals of Momentum, Heat and Mass Transfer by James R.Welty; John Wiley &

Sons (Pvt). Ltd.

6. Heat Transfer, by Vijay Gupta, New Age International (P) Ltd. Publishers

7. Heat Transfer, by Y.V.C. Rao, University Press.

8. Heat Transfer, by R. Yadav, Central Publishing House, Allahabad.


Semester - II

MATERIALS, MANUFACTURING AND TESTING OF ENGINES


OBJECTIVE: To provide knowledge on engine materials, manufacturing and testing of engine

components.

UNIT I

MATERIALS

Selection – types of Materials – Ferrous – Carbon and Low Alloy steels, High Alloy Steels,

Cast Irons – Non Ferrous – Aluminium, Magnesium, Titanium, Copper and Nickel alloys.

(Lectures: 09)

UNIT II

ENGINE COMPONENTS

Cylinder Block, Cylinder Head, Crankcase and Manifolds, Piston Assembly, Connecting

Rod, Crankshaft, Camshaft And Valve Train - Production methods – Casting, Forging,

Powder Metallurgy – Machining – Testing Methods. (Lectures: 09)

UNIT III

ENGINE AUXILIARIES Carburettors, fuel injection system components, radiators, fans, coolant pumps, ignition

System. (Lectures: 09)

UNIT IV

COMPUTER INTEGRATED MANUFACTURING

Integration of CAD, CAM and CIM- Networking, CNC programming for machining of

Engine Components. (Lectures: 09)

UNIT V

QUALITY AND TESTING

TS 16949, BIS codes for testing. Instrumentation, computer aided engine testing, metrology

for manufacturing Engine Components. (Lectures: 09)

TOTAL : (45 LECTURES + 15 TUTORIALS)=60 PERIODS

TEXT BOOKS : 1. Grover, M.P., CAD/CAM, Prentice Hall of India Ltd.

2. Heldt, P.M., High speed internal combustion engines, Oxford & IBH Publishing Co. 3. Judge, A.W., Testing of high speed internal combustion engines, Chapman & Hall.

REFERENCE BOOKS:

1. Richard, W., Heine Carl R. Loper Jr. and Philip, C., Rosenthal, Principles of Metal Casting, McGraw-Hill Book Co.

2. IS: 1602 – 1960 Code for testing of variable speed internal Combustion engines for Automobile Purposes.

3. SAE Handbook.


4. P.Radhakrishnan and S.Subramaniyan, CAD/CAM/CIM, New Age International (P)

Limited, Publishers.

5. Mikett P.Groover, Automation, production Systems and Computer – Integrated

Manufacturing Printice Hall of India Private Limited.


Semester - II

EXPERIMENTAL METHODS IN THERMAL ENGINEERING LAB


LIST OF EXPERIMENTS

1. Measurement of surface profile.

2. Measurement of pressure

3. Measurement of temperature velocity

4. Measurement of flow rate

5. Measurement of level

6. Measurement of speed

7. Measurement of force

8. Measurement of torque

9. Measurement of noise

10. Chemical analysis



Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 5 point scale which would include the practical conducted by the students and a Viva

taken by the faculty concerned. The marks shall be entered on the index sheet of the practical file.

Evaluation scheme:




PRACTICAL PERFORMANCE & VIVA

DURING THE SEMESTER (30

MARKS)

ATTENDANCE

(5 MARKS)

QUIZ

(5

MARKS)

VIVA

(10

MARKS)

TOTAL

INTERNAL

(50

MARKS) EXPERIMENT

(10 MARKS)

FILE

WORK

(10

MARKS)

VIVA

(10

MARKS)


Semester - III

INDUSTRIAL MANAGEMENT AND RESEARCH METHODOLOGY

Course Code: MHM 301 L-3, T-2, P-0, C-4

OBJECTIVE:

1) To enhance the knowledge of students in the area of Industrial Management, General Management, Productivity, leadership and motivational skills.

2) To impart understanding of Research Methodology process, Hypothesis Testing and

statistical analysis.

UNIT-I (Lectures: 09) Industrial management:-Introduction, Concept, Application & Scope. Productivity:

Definition, Measurement, Productivity Index, Types of production system

UNIT-II (Lectures: 09) Management Function: Concept, Nature, Importance, Management: Art and Science,

Management skills, Levels of Management. Evolution of Management: Early contributions,

Taylors and scientific Management, Bureaucracy, Hawthorne Experiments and human

Relations, Social System Approach, Decision Theory Approach.

UNIT-III (Lectures: 09)

Organizational behaviour:- Concept, Nature, conceptual Foundations. Perception: Concept, Nature, Processes, Importance; Motivation: Concept, Process, Theories of Motivation.

Leadership: Style & Theories of Leadership- Trait, Behavioral and Situational Theories; Emotional Intelligence

UNIT-IV (Lectures: 09)

Research Methodology ; Concept of Research and its Application , Types of Research , Steps

involved in Research Processes , Collection of data : Types of Data -Primary & Secondary

data , Various Methods of Collection Of Data.; Concept of sample , Sample Size & Sampling

Procedure, Various Techniques of Sampling .Analysis of data : Coding , Editing and

Tabulation of data , Various kinds of Charts and Diagrams used in data Analysis .

UNIT-V (Lectures: 09) Estimation Theory and Hypothesis testing: Meaning & Characteristics of a good Hypothesis,

Formulation of Hypothesis, ways of stating a Hypothesis, test of significance, Level of

significance, Errors in Hypothesis- test I, test II Errors .Application of Z test , T test , F test

and chi-square test ,

TOTAL: (45 LECTURES + 15 TUTORIALS) =60 PERIODS

TEXT BOOKS:

1- Industrial Engineering and Production Management, M. MAHAJAN, Dhanpat Rai & Sons

2-Koontz Harold & W. Heinz- Essentials of Management (Tata Mc Graw Hill, Fifth Edition 2008)

3:- Robbins Stephen P. Organizational behavior (Pearson Education 13th

Edition) 4-Cooper and Schindler- Business Research Methods (Tata McGraw Hill, 9th Edition)

5:-Kothari CR- Research Methodology Methods and techniques (New age International Publishers)


REFERENCE BOOKS:

1. Industrial Engineering and Management, O.P. KHANNA

2. Principles of Management. L.M.Prasad.

3. K.Aswathappa- Organizational behavior

4. Luthans Fred- Organizational behavior (Tata McGraw Hill, 10th

Edition)

5. Saunders- Research Methods for Business Students(Pearson Education ,2nd

Edition) 6. Byod and others- marketiry Research (All India traveler Bookseller)

7. Beri .G.C- Statistics for management Tata Mc. Graw Hill. 8. Levin Rubin – Statistics for Management (Peasson 2000, new delhi, 7th eduction)


Semester - III

REFRIGERATION AND AIR-CONDITIONING TECHNOLOGIES


OBJECTIVE: To enhance the knowledge of students in the area of Refrigeration, VCR

cycles, Air- conditioning Technologies

UNIT I (Lectures: 09) Introduction, Environmental impact of refrigerants

UNIT II (Lectures: 09) Analysis of VCR cycles– multistage, multi evaporator, cascade systems, supercritical and

other advanced cycles.

UNIT III (Lectures: 09) Properties and selection of pure and mixed refrigerants. Properties of binary mixtures.

UNIT IV (Lectures: 09) Analysis of vapor absorption cycles–Aqua ammonia and Li Br water cycles.


Air cycle refrigeration, vortex tube, steam jet ejector refrigeration, thermoelectric refrigeration, cryogenics, desiccant cooling–solid and liquid systems, hybrid systems, heat

pumps and heat transformers.


Text Books:

1. Refrigeration & air conditioning technology by William C. Whitman, William M. Johnson,

John Tomczyk.

2. Refrigeration & air conditioning technology by Norman Cook.

3. Refrigeration & air conditioning by C.P. Arora .

Reference Books:

1. Refrigeration and Air-Conditioning by Guy Hundy, Guy F. Hundy, A. R. Trott.

2. Refrigeration and Air Conditioning Technology by William C. Whitman, Bill Whitman,

William M. Johnson


Semester – III

HEAT EXCHANGERS Course Code: MME 303 L-3, T-2, P-0, C-4

Unit-1: HEAT EXCHANGER TYPES AND CONSTRUCTION (Lectures: 09)

1.1 Shell and Tube Heat Exchangers 1.2 Plate-Type Heat Exchangers

1.3 Spiral Plate Heat Exchangers

1.4 Air-Cooled Heat Exchangers

1.5 Compact Heat Exchangers

1.6 Boiler Feed water Heaters

1.7 Recuperators and Regenerators

Unit-2: ESTIMATION OF SIZE AND COST (Lectures: 09)

2.1 Basic Equations for Required Surface

2.2 Mean Temperature Difference

2.3 Overall Heat-Transfer Coefficient

2.4 Pressure Drop

Unit-3: RATING METHODS (Lectures: 09)

3.1 Shell and Tube Single-Phase Exchangers

3.2 Shell and Tube Condensers 3.3 Shell and Tube Reboilers and Vaporizers

3.4 Air-Cooled Heat Exchangers 3.5 Other Exchangers

Unit-4: COMMON OPERATIONAL PROBLEMS (Lectures: 09)

4.1 Fouling

4.2 Vibration

4.3 Flow Mal distribution

4.4 Temperature Pinch

4.5 Critical Heat Flux in Vaporizers

4.6 Instability

4.7 Inadequate Venting, Drainage or Blow down

Unit-5: USE OF COMPUTERS IN THERMAL DESIGN OF PROCESS HEAT

EXCHANGERS (Lectures: 09)

5.1 Introduction

5.2 Incrementation

5.3 Main Convergence Loops

5.4 Rating, Design, or Simulation

5.5 Program Quality and Selection

5.6 Determining and Organizing Input Data

TOTAL : (45 LECTURES + 15 TUTORIALS)=60 PERIODS

TEXT BOOKS

1. Fundamentals of Engg Heat & Mass Transfer by R.C. Sachdeva. New age international publishers.

2. Heat & Mass Transfer by R.K Rajput. S Chand Publications.

3. Heat and Mass Transfer By Dr. R Yadav. Central publishing House.


Semester - III

COMPUTATIONAL HEAT TRANSFER


OBJECTIVE: To enhance the knowledge of students in the area of conduction in steady state, transient state, coupling methods, flow simulations.


Introduction. 1-, 2- and 3-D conduction for steady state and transient conditions.


Boundary conditions, implementation and solution methods. Convection in incompressible

flows; stream function vorticity and primitive variables formulations, staggered grid,

SIMPLE and SIMPLER pressure-velocity coupling methods, boundary conditions and

implementation issues.


External and internal flow simulations.


Numerical methods for radiation–enclosures with gray gas, Hottel zone method.

UNIT V (Lectures: 09) Combined convection and radiation. Applications of Monte-Carlo method. Special topics.


Text Books:

1. Computational heat transfer by Yogesh Jaluria, Kenneth E. Torrance

2. Computational heat transfer by A. A. Samarski, P.N. Vabishchevich

Reference Books:

1. Computational heat transfer by He Ya-Ling

2. Advances in numerical heat transfer by W. J. Minkowycz


Semester - III

REFRIGERATION AND AIR CONDITIONING TECHNOLOGIES LAB


List of experiments:

1.General Study of vapor compression refrigeration system.

2. General Study of Ice Plant

3. General Study and working of cold storage

4. General Study Trane Air Condition (Package Type).

5. General Study of Electrolux Refrigeration

6. General Study One tone Thermax refrigeration unit.

7. General Study of Water cooler

8. General Study of Psychrometers (Absorption type)

9. General Study of Leak Detectors (Halide Torch).

10. General Study and working of Gas charging Rig.

11. General Study of window Air Conditioner.

12. General Study and working of Vapor compression Air conditioning Test rig.

13. Experimentation on Cold Storage of Calculate COP & Heat Loss. 14. Experimentation on Vapor compression Air Conditioning test rig.

15. Changing of Refrigerant by using Gas Charging Kit.



Each experiment would be evaluated by the faculty concerned on the date of the experiment on a 5 point scale which would include the practical conducted by the students and a Viva

taken by the faculty concerned. The marks shall be entered on the index sheet of the practical

file.

Evaluation scheme: PRACTICAL PERFORMANCE & VIVA

DURING THE SEMESTER (30 MARKS)

ATTENDANCE (5 MARKS)

QUIZ (5

MARKS)

VIVA (10

MARKS)

TOTAL INTERNAL

(50

MARKS)

EXPERIMENT

(10 MARKS)

FILE

WORK

(10

MARKS)

VIVA

(10

MARKS)





Semester III

MINOR PROJECT

Course Code: MME391 L T P C 0 0 4 2

Guidelines

Students will be required to undertake a project work of specialization in the Masters course. The topic of the project shall be finalized in consultation with the project guide allocated to the

student by the Coordinator of the course and project guide would be the supervisor of the student.

Students will also be required to prepare an exhaustive report of the work carried out during the semester. The project work is to be done within the Institute.

The student at the end of the III semester will present his/her project report before a committee

constituted by the course coordinator which would comprise of at least three members. The marks by the external examiner would be based on the project report submitted by the

student which shall be evaluated by the external examiner and cross examination done of the

student concerned.

The marking shall be as per the evaluation details in the course outline.


Guide Research Committee 50 100

25 25


Semester - III

PROJECT WORK PHASE-1


Selection of Topic:

1. The student will submit a synopsis at the beginning of the semester for the approval of

thesis topic to the Departmental Research Committee (DRC) (DRC shall be

nominated by the Director), in a specified format. The format shall be as per the

following guidelines-

Template for synopsis: Topic:

(1) Introduction 1 Page

(2) Theory/Problem Statement 1-2 Pages

(a) Background/Literature Review

(b) Hypothesis formulation

(3) Expected Contribution of the study 1-2 Pages

(4) Research Methodology 1-2 Pages

(5) References 1-2 Pages

2. Synopsis must be submitted within four weeks of the commencement of semester.

3. On acceptance of the synopsis/topic, a guide will be allotted to the student. The guide

may be from with in the faculty or from outside. In either of the cases the student is

required to submit an acceptance certificate from the proposed guide. In case the

propose guide is from outside his/her bio-data duly verified by the head of the

organization where he/she is working must be submitted by the student. In this case it

is the responsibility of the student to ensure that the guide is present in the college on

the day of synopsis presentation and final presentation. It is to be noted that a person

can not act as guide for more than five projects/thesis simultaneously. This condition

is inclusive of non TMU students. This aspect will also be included in the certificate provided by the guide.

Dissertation work:

4. On confirmation of the topic and allocation of the guide, the student shall immediately

start the thesis work.

5. He/she shall submit the progress of the work done by him/her in the form of a

monthly report till the completion of the work and the submission of the thesis.

6. In phase-1 the student shall be evaluated based on the following-

(a) Synopsis (25%)

(b) Frequency of interaction with the guide. (Progress report) (25%)

(c) Final Presentation of the work done during the semester. (50%)

7. Serial 6-(a & c) shall be assessed by DRC and 6-(b) by the guide. The student is

required to submit three hard copies of the proposed presentation duly countersigned


by the guide to the departmental head. Student should generally restrict him/her self to

the presentation slide submitted by him/her.


Guide Research

Committee 50 100

25 25


Semester - IV

(CONTINUATION OF PHASE-1 (DISSERTATION AND PRESENTATION))


Thesis work

1. As brought out for MME 399, the student shall meet the guide frequently for the

necessary guidance for the Thesis work.

2. During the next six to eight weeks as well as the semester break, student should read

the literature germane to the thesis topic. The progress of the Research / thesis work

should continuously be informed to the guide.

3. In the end after necessary collection of data, literature survey and research work, the

students must prepare a thesis report (Final Report). The report shall be arranged in the sequence consisting of the following:-

(a) Top Sheet of transparent plastic.

(b) Top cover.

(c) Preliminary pages.

(i) Title page

(ii) Certification page.

(iii) Sanctity Certificate by the Guide

(iv) Acknowledgment.

(v) Abstract.

(vi) Table of Content.

(vii) List of Figures/Photographs and Tables.

(viii) Nomenclature.

(d) Chapters (Main Material).

(e) Appendices, if any.

(f) Bibliography/ References.

(g) Evaluation Form.

(h) Back Cover (Blank sheet).

(i) Back Sheet of Plastic (May be opaque or transparent).

(Note: Sample of above is given in succeeding paragraphs.)

4. Top Cover- The sampled top cover shall be as Under:

PROJECT WORK – PHASE-2


TITLE OF THE THESIS

NAME OF THE STUDENT WITH COURSE, STREAM, SEMESTER & SECTION.

Under The Guidance of

NAME OF THE GUIDE WITH DESIGNATION

(TMU LOGO)

Department of Mechanical Engineering College of Engineering

Teerthankar Mahaveer University

Moradabad-244001

MONTH AND YEAR

5. Title Page:- The Title Page cover shall be as under:

M.Tech. Thesis

(Submitted in Partial fulfillment of the requirement for the degree of

MASTER OF TECHNOLOGY

In

MECHANICAL ENGINEERING (Thermal Engineering)

by Name of Student in capital Letters

(Roll No.)

Under the Guidance of

Name of the Guide with designation in capital letters

(TMU LOGO)

COLLEGE OF ENGINEERING

TEERTHANKAR MAHAVEER UNIVERSITY

N.H. 24, BAGARPUR, MORADABAD-244001

MONTH AND YEAR


6. Certification page:- This shall be as under:




Moradabad-244001

The Thesis Report with Title “Topic of the Thesis.” Submitted by Mr./Ms. (Name of the

student) (Roll No.) may be accepted for being evaluated-

Date Signature


For Guide:- If you Choose not to sign the acceptance certificate above, please

indicate reasons for the same from amongst those given below-

(a) The amount of time and effort put in by the student is not sufficient.

(b) The amount of work put in by the student is not adequate.

(c) The report does not represent the actual work that was done / expected to be done.

(d) The work is not original (in such case the guide should not sign the sanctity certificate).

(e) Any other objection (Please elaborate)

7. Sanctity certificate:- This shall be as under:




Moradabad-244001

This Thesis Report with Title “Topic of the Thesis.” Submitted by Mr./Ms. (Name of the

student) (Roll No.) in partial fulfillment of the award of M.Tech degree is the original

contribution by the student to the best of my knowledge.

Date Signature



5. Abstract- A portion of the dissertation evaluation will be based on the abstract. The abstract

will be evaluated according to the adherence to related technical field and according to the

format described below.

The dissertation abstract is an important record of the coverage of your topic and provides a

valuable source of leading references for students. Accordingly, the abstract must serve as an

introduction to your dissertation topic. The abstract will be limited to 500 words, excluding

figures and tables (if any). The abstract will include references to the research articles upon

which the dissertation is based as well as research articles that have served as key

background material.

6. Table of Content:- This shall be as under

SAMPLE SHEET FOR TABLE OF CONTENTS

TABLE OF CONTENTS

Chapter No Title Page No.

Certificate ii

Sanctity Certificate iii

Acknowledgement iv

Abstract v

List of Figures/Photographs vi

List of Table vii

Nomenclature and symbols viii

1 Introduction 1

1.1

1.2

1.3

2 …………………..

3 ……………….....

4 Appendices

5 References/ Bibliography

6 Evaluation sheet ……..


7. List of Figures and Tables:- This will be as under

List of Figures and Tables - sample entries are given below:

List of Figures

Figure

No.

Caption / Title

Page

No.

2.1 Schematic representation of a double layered droplet . . . 21

. . .

3.2 Variation in rate versus concentration . . . 32

List of Tables - sample entries are given below:

List of Tables

Table

No.

Caption / Title

Page

No.

2.1 Thickness of a double layered droplet . . . 22

. . .

3.2 Variation in rate versus concentration . . . 34

8. Main Pages:-

The Main report should be divided in chapters (1, 2, 3 ….. etc.) and

structured into sections (1.1, 1.2 ……..etc) and subsection (1.2.1, 1.2.2, ….. etc). Suitable

title should be given for section and subsection where necessary.

Referencing style- wherever reference is given in the main pages it should have the

following format.

The values of thermal conductivities for a variety of substances have been reported by

Varma (1982). For polymers, however, the information is more limited and some recent

reviews have attempted to fill the gaps (Batchelor and Shah, 1985).


For two authors -

(Batchelor and Kapur, 1985)

For more than two authors -

(Batchelor et al., 1986)

By same author/combination of authors in the same year -

(Batchelor, 1978a; Batchelor, 1978b; Batchelor et al., 1978)

12. Bibliography/References-

In the bibliography/ references list standard formats

must be used. The typical formats are given blow-

Journal articles: -

David, A.B., Pandit, M.M. and Sinha, B.K., 1991, "Measurement of

surface viscosity by tensiometric methods", Chem. Engng Sci.47,

931-945.

Books: -

Doraiswamy, L.K. and Sharma, M.M., 1984, "Heterogeneous Reactions-

Vol 1", Wiley, New York, pp 89-90.

Edited books/Compilations/Handbooks: -

Patel, A.B., 1989, "Liquid -liquid dispersions", in Dispersed Systems

Handbook, Hardy, L.C. and Jameson, P.B. (Eds.), McGraw Hill,

Tokyo, pp 165-178.

Lynch, A.B. (Ed.), 1972, "Technical Writing", Prentice Hall, London.

Theses/Dissertations: -

Pradhan, S.S., 1992, "Hydrodynamic and mass transfer characteristics

of packed extraction columns", Ph.D. Thesis, University of

Manchester, Manchester, U.K..


Citations from abstracts: -

Lee, S. and Demlow, B.X., 1985, US Patent 5,657,543, Cf C.A. 56,

845674.

Personal Communications: -

Reddy, A.R., 1993, personal communication at private meeting on

22 October 1992 at Physics Department, Indian Institute of

Technology, Delhi.

Electronic sources (web material and the like):

For citing web pages and electronic documents, use the APA style given at:

http://www.apastyle.org/elecsource.html

13. Evaluation Form:- Three sheets of evaluation form should be attached in the report as under.

a. Evaluation form for guide and other Internal Examiner.

b. Evaluation form for external examiners.

c. Summary Sheet

14. Evaluation form for Guide & Internal Examiners:-


EVALUATION SHEET

(To be filled by the GUIDE & Internal Examiners only)

Name of Candidate:

Roll No :

Class and Section:

Please evaluate out of marks as indicated.

S.

No

.

Details Marks

(10)

Marks (5) Marks (5)

Guide Int. Exam.

1

Int. Exam.

2


2


WORK




4 SLIDES/PRESENTATION SUBMITTED


5 FREQUENCY OF INTERACTION ( Timely

submission, Interest shown, Depth, Attitude)

Total

Average out of 100

Signature: Signature: Signature:

Date: Date: Date:


EVALUATION SHEET

(To be filled by the External Examiner only)

Name of Candidate:

Roll No :

Please evaluate out of forty marks each.

S.No. Details Marks (20)


2


WORK




4 POWER POINT PRESENTATION

(Clear, Structured)

5 SLIDES


Total (Out of 100)

Signature:

Date:

EVALUATION SUMMARY SHEET

Name and Roll

No.

Internal

Examiners (100)

External

Examiner (100)

Total (200) Result

(Pass/Fail)

Note:- The summary sheet is to be completed for all students and the same shall also be

compiled for all students examined by External Examiner. The Format shall be provided by

the course coordinator.

General points for the thesis

1. The report should be typed on A4 sheet. The Paper should be of 70-90 GSM.

2. Each page should have minimum margins as under

a. Left 1.5 inches

b. Right 0.5 Inches

c. Top 1 Inch

d. Bottom 1 Inch (Excluding Footer, If any)


3. The printing should be only on one side of the paper

4. The font for normal text should Times New Roman, 12 size for text and 14 size for heading

and should be typed in double space. The references may be printed in Italics or in a different

fonts.

5. The Total Report should not exceed 50 pages including top cover and blank pages.

6. A CD of the report should be pasted/attached on the bottom page of the report.

7. Similarly a hard copy of the presentation (Two slide per page) should be attached along with

the report and a soft copy be included in the CD.

8. Three copies completed in all respect as given above is to be submitted to the guide. One

copy will be kept in departmental/University Library, One will be returned to the student and

third copy will be kept for the guide.

9. The power point presentation should not exceed 30 minutes which include 10 minutes for

discussion/Viva.

study & evaluation scheme of master of technology...

Documents