summit x670 series - homeyen€¦ · summit x670 switches also support priority-based flow control...

Extreme Networks Data Sheet

Summit X670V-48t 48 Port 10 GbE Copper Switch w/optional 40 GbE uplink

Make Your Network Mobile

OverviewThe Summit X670V-48t provides high density for 10 Gigabit Ethernet switching in a small

1RU form factor. These switches support up to 64 10GbE ports in one system and 448 10GbE

ports in a stacked system using high-speed SummitStack-V160, which provides 160 Gbps

throughput and distributed forwarding. And, additionally, these switches support up to 384

10GbE ports of 10GbE in a stacked system using high-speed SummitStack-V320, which

provides 320 Gbps throughput and distributed forwarding.

With its versatile design, the Summit X670 provides high density Layer 2/3 switching with

low latency cut-through switching, and IPv4 and IPv6 unicast and multicast routing to

enable enterprise aggregation and core backbone deployment in AC-powered and

DC-powered environments.

Summit X670 series simplifies network operation with the ExtremeXOS® modular operating

system (OS), which is used amongst all Extreme Networks® Summit and BlackDiamond®

Ethernet switches. The high availability ExtremeXOS operating system provides simplicity

and ease of operation through the use of one OS everywhere in the network.

10 Gigabit Ethernet Switching The Summit X670 model offers 48-port 10 Gigabit Ethernet non-blocking switching with

10GBASE-T interfaces. Summit X670 is capable of Layer 2 and Layer 3 forwarding at up to

714 million packets per second forwarding rate in a small 1RU form factor, enabling

next-generation high-performance server deployment in data centers. And the X670

supports SummitStack-V high-speed, longer distance stacking over the 10GbE ports.

SummitStack-V–Flexible Stacking Over 10 Gigabit Ethernet SummitStack-V capability utilizes 10 GbE ports as stacking ports, enabling the use of

standard cabling and optics technologies used for 10GbE BASE-T RJ45 and BASE-X SFP+

available on the X670V-48t. SummitStack-V provides long-distance stacking connectivity of

up to 40 km while reducing the cable complexity of implementing a stacking solution.

SummitStack-V enabled 10 GbE ports must be physically direct-connected. SummitStack-V

is compatible with Summit X450e, X450a, X460, X480, X650 and X670 switches running

the same version of ExtremeXOS.

HighlightsThe Summit® X670V-48t switches are

purpose-built top-of-rack switches designed

to support emerging 10 Gigabit Ethernet-

enabled servers in enterprise and cloud data

centers. Summit X670 helps optimize new

server deployments with its optional,

future-proofing 40 GbE uplink support while

providing seamless support from existing

Gigabit Ethernet-based servers to 10

GbE-based high-performance servers to

start the transition to the new virtualized

environment.

Technical Specifications

2

Extreme Networks Data Sheet: Summit X670-48t Technical Specifications

40 Gigabit Ethernet Uplinks and High-Speed 320 and 160 Gbps Stacking

The Summit X670V-48t switch can support an additional four QSFP+ ports

of 40 GbE with the optional VIM4-40G4X module. With this option, you

can maximize the number of interfaces for servers up to 48 ports while

using the dedicated four-port 40 GbE module for uplink connectivity. The

optional VIM4-40G4X provides 160 Gbps aggregated bandwidth to the

backbone. Each 40 Gigabit Ethernet port can be independently configured

as 40 Gigabit Ethernet or 4 x 10 Gigabit Ethernet; thus with the VIM4-

40G4X module, Summit X670V-48t can support up to 64 ports of 10

Gigabit Ethernet in a 1RU form factor and is capable of Layer 2 and Layer 3

forwarding at up to 952 million packets per second forwarding rate. This

configuration provides 3:1 oversubscription from front ports (total 480

Gbps bandwidth) to uplink ports (total 160 Gbps bandwidth) and

maximizes server port density.

Summit X670V-48t together with VIM4-40G4X provides high speed

stacking options running at 160 Gbps or 320 Gpbs through the

SummitStack technology. SummitStack-V160 can be enabled on two 40

Gigabit Ethernet QSFP+ ports on the VIM4-40G4X, using half of the

module’s four ports as stacking interfaces. SummitStack-V320 can be

enabled on all four 40 Gigabit Ethernet QSFP+ ports on the VIM4-40G4X,

using all of the module’s four ports as stacking interfaces.

SummitStack-V320 on the X670 is compatible with SummitStack-V320 on

Summit X480 and Summit X650 series switches. SummitStack-V160 on the

X670 is compatible with SummitStack-V160 on Summit X480 and Summit

X650 series switches and is also compatible with SummitStack-V80, which

is available for Summit X460 and Summit X480 series switches.

Green DesignThe Summit X670 series is designed to be environmentally green. System

power consumption is very low at both high-load and idle situations

through the power-efficient hardware design. The power supplies are also

highly efficient, which minimizes the loss of power and unnecessary heat

generated by the power supply. Summit X670 series switches can be used

in AC or DC powered environments.

Supports Virtualized Data CentersWith the optional feature pack, Summit X670 switches can also support

Direct Attach™ (VEPA), which eliminates the virtual switch layer, simplifying

the network and improving performance. Direct Attach enables data center

simplification by reducing network tiers from 4 or 5 tiers to just 3 or 2 tiers,

depending on the size of the data center.

To further enhance data center operations, Summit X670 switches support

XNV™ (ExtremeXOS Network Virtualization), which is natively supported

in the ExtremeXOS operating system and is a licensable feature pack

for Ridgeline™, a network and service management application, sold

separately. XNV provides insight, control and automation for virtualized

data centers.

Summit X670 switches also support Priority-based Flow Control (PFC, or

IEEE 802.1Qbb), which allows network traffic to be controlled independently

based on Class of Service. PFC allows network traffic that requires lossless

throughput to be prioritized, while other traffic types that do not require or

perform better without PFC can continue as normal.

DCB Support with Enterprise Core Class ScalabilityThe Summit X670 series supports Data Center Bridging features such as

Priority Flow Control (PFC), Enhanced Transmission Selection (ETS) and

Data Center Bridging eXchange (DCBX) for data center convergence. At

the same time, the Summit X670 series offers more cost-effective 10

Gigabit Ethernet switches, for both small-sized core backbone and

traditional three-tier network architectures. Summit X670 series can

support 10 Gigabit Ethernet campus aggregation with its core class routing

and switching scalability. The Summit X670 series can support up to 16,000

IPv6 longest prefix matching routing tables, 6,000 IP ARP entries and

3,000 IP multicast group entries.

Figure 1: Summit X670V-48T and BlackDiamond X8 Switches providing 10 GbE

Copper based server connections

3


One Operating SystemExtreme Networks simplifies network operation by offering one common

OS – ExtremeXOS – throughout the BlackDiamond and Summit switchIng

portfolio. From 10/100 Mbps switching products such as Summit X150

and Summit X250e to the multi-10 gigabit core backbone BlackDiamond

modular chassis switches, all switches can run the same version of the OS,

which helps deploy, operate and maintain your entire network and reduce

operating costs.

10 Gigabit Ethernet Copper

The Summit X670-48t switch supports 48 10GBase-T interfaces.

10GBASE-T supports simpler cabling infrastructure, industry- standard and

commonly used unshielded twisted pair cable, and can support up to 100

meters with Category 6a or 55 meters with Category 6 or 5e cable. The

10GbE copper ports autonegotiate for 100Mbps, 1Gbps, or 10Gbps speeds.

10 Gigabit Ethernet SFP+The Summit X670-48t switch supports 4 ports SFP+ optics on shared

combination ports, which can support passive copper cable for up to 10

meters. The switches also support fiber-optical cable installation with SFP+

transceivers such as 10GBASE-SR, LR, LRM, and ER. Summit X670 SFP+

ports support dual interface speeds of Gigabit Ethernet and 10 GbE. SFP+

ports can accept both gigabit SFP and 10 gigabit SFP, and depending upon

the pluggable optics you choose, SFP+ can work in both modes.

40 Gigabit Ethernet QSFP+The Summit X670V model provides a VIM4 slot for the optional VIM4-

40G4X module. The VIM4-40G4X module supports four QSFP+ optics,

and supports up to four ports of 40 GbE. 40 GbE QSFP+ ports can accept

QSFP+ passive and active cables, as well as QSFP+ transceivers. Each

40 GbE port can be configured as a 40 GbE port or as four 10 GbE ports.

The 10 GbE port mode can be supported by a 40GBASE-SR4 QSFP+

transceiver and fan-out optical cables, and is compatible with the

10GBASE-SR optical interface for distances up to 100 meters.

Low Power Consumption with Optimized Cooling OptionsThe Summit X670-48t switch consumes low power and provides optimized

cooling options. Most servers installed in a standard 19-inch rack system

flow air from front to back to maximize cooling performance. Compared to

side-to-side air flow, front-to-back air flow provides more effective cooling

throughout the rack system in the data center. The Summit X670 series has

2+1 hot swappable fan tray offering effective front-to-back air flow, or

back-to-front air flow. Back-to-front air flow allows placement of 10 Gigabit

Ethernet SFP+ ports in the back side of the rack and reduces distance

between switches and servers for 10GBASE-CR SFP+ passive copper cable

installations.

Modular Operating System for Non-Stop Operation

Preemptive Multitasking and Protected Memory Summit X670 series switches allow each of many applications—such as

Open Shortest Path First (OSPF) and Spanning Tree Protocol (STP)—to run

as separate OS processes that are protected from each other. This drives

increased system integrity and inherently protects against DoS attacks.

Process Monitoring and RestartExtremeXOS increases network availability using process monitoring and

restart. Each independent OS process is monitored in real time. If a process

becomes unresponsive or stops running, it can be automatically restarted.

Loadable Software ModulesThe modular design of the ExtremeXOS OS allows the upgrading of

individual software modules, should this be necessary, leading to higher

availability in the network.

5299-04

40G x 4 EAPSSummit X670

Summit X670

Summit X670

1RU Servers

1RU Servers

1RU Servers

Summit X670

1RU Servers

1RU Servers

Star Configuration Ring ConfigurationBlackDiamond® X* BlackDiamond X

Summit X670 Summit X670 Summit X670Summit® X670

2 x 40G

2 x 40G2 x 40G

Figure 2: Summit X670 High Speed Uplink Option

4


Spanning Tree/Rapid Spanning Tree ProtocolsSummit X670 supports Spanning Tree (802.1D), Per VLAN Spanning Tree

(PVST+), Rapid Spanning Tree (802.1w) and Multiple Instances of Spanning

Tree (802.1s) protocols for Layer 2 resiliency.

Software-Enhanced AvailabilitySoftware-enhanced availability allows users to remain connected to the

network even if part of the network infrastructure is down. Summit X670

continuously checks for problems in the uplink connections using advanced

Layer 3 protocols such as OSPF, VRRP and Extreme Standby Router

Protocol™ (ESRP, supported in Layer 2 or Layer 3), and dynamically routes

traffic around the problem.

Equal Cost MultipathEqual Cost Multipath (ECMP) routing allows uplinks to be load balanced for

performance and cost savings while also supporting redundant failover. If

an uplink fails, traffic is automatically routed to the remaining uplinks and

connectivity is maintained.

Link Aggregation (802.3ad)Link aggregation allows trunking of up to eight links on a single

logical connection, for up to 80 Gbps of redundant bandwidth per

logical connection.

Multi-Switch LAG (M-LAG)M-LAG can address bandwidth limitations and improve network resiliency, in

part by routing network traffic around bottlenecks, reducing the risks of a

single point of failure, and allowing load balancing across multiple switches.

Hardware RedundancySummit X670 series switches support a dual redundant AC/DC power

supply to provide high availability. The power supply can be hot-swapped

and replaced should it fail. Summit X670 also supports N+1 redundant

hot-swappable fan trays.

Robust IP and MAC Security Framework

Media Access Control (MAC) LockdownMAC security allows the lockdown of a port to a given MAC address and

limiting the number of MAC addresses on a port. This capability can be

used to dedicate ports to specific hosts or devices such as VoIP phones or

printers and avoid abuse of the port—a capability that can be especially

useful in environments such as hotels. In addition, an aging timer can be

configured for the MAC lockdown, protecting the network from the effects

of attacks using (often rapidly) changing MAC addresses.

IP SecurityExtremeXOS IP security framework helps protect the network

infrastructure, network services such as DHCP and DNS and host

computers from spoofing and man-in-the-middle attacks. It also protects

the network from statically configured and/or spoofed IP addresses and

builds an external trusted database of MAC/IP/port bindings providing the

traffic’s source from a specific address for immediate defense.

Identity ManagementIdentity Manager allows network managers to track users who access their

network. User identity is captured based on NetLogin authentication, LLDP

discovery and Kerberos snooping. ExtremeXOS uses the information to

then report on the MAC, VLAN, computer hostname, and port location of

the user. Further, Identity Manager can create both roles and policies,

and then bind them together to create role-based profiles based on

organizational structure or other logical groupings, and apply them across

multiple users to allow appropriate access to network resources. In

addition, support for Wide Key ACLs further improves security by going

beyond the typical source/destination and MAC address as identification

criteria access mechanism to provide filtering capabilities.

2+1 Redundant Fan Tray

VIM4 Slot Redundant AC/DC PSU

Summit X670V

5


Threat Detection and Response

CLEAR-Flow Security Rules EngineCLEAR-Flow Security Rules Engine provides first-order threat detection

and mitigation, and mirrors traffic to security appliances for further analysis

of suspicious traffic in the network.

sFlowSummit X670 series supports hardware-based sFlow® sampling that

provides the ability to sample application-level traffic flows on all

interfaces simultaneously.

Port MirroringTo allow threat detection and prevention, Summit X670 supports

many-to-one and one-to-many port mirroring. This allows the mirroring

of traffic to an external network appliance such as an intrusion detection

device for trend analysis or for utilization by a network administrator for

diagnostic purposes. Port mirroring can also be enabled across switches in

a stack.

Line-Rate Ingress and Egress ACLsACLs are one of the most powerful components used in controlling

network resource utilization as well as in protecting the network.

Summit X670 series supports up to 2,048 ingress ACLs and 1,024 egress

ACLs per system based on Layer 2-, 3- or 4-header information such as the

MAC or IP source/destination address. ACLs are used for filtering the traffic,

as well as classifying the traffic flow to control bandwidth, priority,

mirroring, and policy-based routing/switching.

Denial of Service ProtectionSummit X670 series effectively handles Denial of Service (DoS) attacks. If

the switch detects an unusually large number of packets in the CPU input

queue, it assembles ACLs that automatically stop these packets from

reaching the CPU. After a period of time these ACLs are removed, and

reinstalled if the attack continues. ASIC-based LPM routing eliminates the

need for control plane software to learn new flows, allowing more network

resilience against DoS attacks.

Secure and Comprehensive Network ManagementAs the network becomes a foundation of the enterprise application,

network management becomes an important piece of the solution.

Summit X670 supports comprehensive network management through

Command Line Interface (CLI), SNMP v1, v2c, v3, and ExtremeXOS

ScreenPlay™ embedded XML-based Web user interface. With a variety of

management options and consistency across other Extreme Networks

modular and stackable switches, Summit X670 series switches provide

ease of management for demanding converged applications.

Extreme Networks has developed tools that simplify and help in efficiently

managing your network. Ridgeline network and service management

provides fault, configuration, accounting, performance and security

functions, allowing more effective management of Extreme Networks

products, solutions and third-party devices in a converged network.

Supported Protocols and StandardsA list of supported protocols and standards is available on the Extreme Networks website at: http://www.extremenetworks.com/go/xos


6

Extreme Networks Data Sheet: Summit X670-48t Switch

General Specifications

Quality of Service and Policies

1280 Gbps switch bandwidth, 952 Mpps forwarding rate

9216 Byte maximum packet size (Jumbo Frame)

Store-and-Forward and Cut-Through switching support

< 3.3 micro second latency (64-byte packet) for -48t copper models

128 load sharing trunks, up to 8 members per trunk

4,094 VLANs (Port, Protocol, IEEE 802.1Q)

2,048 ingress and 1,024 egress ACL rules per switch

Forwarding Tables

Layer 2/MAC Addresses: 128K

IPv4 Host Addresses: 16K

IPv4 LPM Entries: 16K

IPv6 Host Addresses: 8K

IPv6 LPM Entries: 8K

CPU, Memory

64-bit MIPS Processor, 1GHz clock

1GB ECC SDRAM

1GB Compact Flash

QoS, Rate Limiting

2,048 ingress rules and 512 ingress meters

Ingress and egress bandwidth policing/rate limiting per flow/ACL

8 QoS egress queues/port

1,024 egress rules and 512 egress meter

Egress bandwidth rate shaping per egress queue and per port

Rate Limiting Granularity: 8 Kbps – 1Mbps

LED Indicators

Per port status LED including power status

System Status LEDs: management, fan and power

Motion Detection LED

Total External Ports with VIM-4-40G4X Populated

44 port 10GASE-T RJ-45 (100M/1G/10G tri speed) plus additional 4 combo ports of 10GBASE-T RJ-45 (1G/10G dual speed) shared with 10GBASE-X SFP+ (1G/10G dual speed)

4 port 40GBASE-X QSFP+ (10G/40G dual speed)

One RJ-45 RS-232c Serial port (control port)

One 10/100/1000BASE-T out-of-band management port

Power Supply Support

Summit 550W AC PSU

Summit 550W DC PSU

Physical Specifications

Summit X670

Height: 1.73 Inches/4.4 cm

Width: 17.4 Inches/44.1 cm

Depth: 20.4 Inches/51.9 cm

Weight: 17.0 lbs/7.7 kg (Summit X670V-48t; w/o PSU or VIM4-40G4X)

Physical Specifications (continued)

VIM4-40G4X




Weight: 0.99 lbs/0.45 kg

Summit X670 Fan Module




Weight: 0.357 lbs/0.162 kg

Operating Specifications

Operating Temperature Range: 0° C to 45° C (32° F to 113° F)

Operating Humidity: 10% to 95% relative humidity, non-condensing

Operating Altitude: 0-3,000 meters (9,850 feet)

Operational Shock (Half Sine): 30 m/s2 (3 g), 11ms, 60 Shocks

Operational Random Vibration: 3-500 MHz @ 1.5g rms

Storage & Transportation Conditions (Packaged)

Transportation Temperature: -40° C to 70° C (-40° F to 158° F)

Storage and Transportation Humidity: 10% to 95% RH, non-condensing

Packaged Shock (Half Sine): 180 m/s2 (18 g), 6ms, 600 shocks

Packaged Sine Vibration: 5-62 Hz @ Velocity 5mm/s, 62-500 Hz @ 0.2G

Packaged Random Vibration: 5-20 Hz @ 1.0 ASD w/-3dB/oct. from 20-200 Hz

14 drops min on sides & corners @ 42” (<15 kg box)

Acoustic Noise

Summit X670V-48t (FB): 56.6 dB(A) – 68.8dB(A)

Regulatory/Safety

North American Safety of ITE

UL 60950-1 1st Ed., Listed Device (U.S.)

CSA 22.2#60950-1-03 1st Ed. (Canada)

Complies with FCC 21CFR 1040.10 (U.S. Laser Safety)

CDRH Letter of Approval (U.S. FDA Approval)

European Safety of ITE

EN60950-1:2006

EN 60825-1+A2:2001 (Lasers Safety)

TUV-R GS Mark by German Notified Body

2006/95/EC Low Voltage Directive

International Safety of ITE

CB Report & Certificate per IEC 60950-1:2006 + National Differences

AS/NZS 60950-1 (Australia/New Zealand)

EMI/EMC Standards

North America EMC for ITE

FCC CFR 47 part 15 Class A (U.S.A.)

Summit X670-48t Switch



7


EMI/EMC Standards (continued)

International EMC Certifications

CISPR 22: 2006 Ed 5.2, Class A (International Emissions)

CISPR 24:A2:2003 Class A (International Immunity)

EC/EN 61000-4-2:2001 Electrostatic Discharge, 8kV Contact, 15 kV Air, Criteria A

EC/EN 61000-4-3:2006 Radiated Immunity 10V/m, Criteria A

EC/EN 61000-4-4:2005 Transient Burst, 1 kV, Criteria A

IEC/EN 61000-4-5:2005 Surge, 2 kV L-L, 2 kV L-G, Level 3, Criteria A

IEC/EN 61000-4-6:2005 Conducted Immunity, 0.15-80 MHz, 10V/m unmod. RMS, Criteria A

EC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods, Criteria C

Country Specific

VCCI Class A (Japan Emissions)

ACMA (C-Tick) (Australia Emissions)

CCC Mark

KCC Mark EMC Approval (Korea)

Telecom Standards

EN/ETSI 300 386:2001 (EMC Telecommunications)

EN/ETSI 300 019 (Environmental for Telecommunications)

MEF9 and MEF14 certified for EPL, EVPL and ELAN

NEBS Level 3 compliant to portions of GR-1089 Issue 4 & GR-63 Issue 3 as defined in SR3580 with exception to filter requirement

IEEE 802.3 Media Access Standards

IEEE 802.3ab 1000BASE-T

IEEE 802.3z 1000BASE-X

IEEE 802.3ae 10GBASE-X

IEEE 802.3ba 40GBASE-X

Environmental Standards

EN/ETSI 300 019-2-1 v2.1.2 (2000-09) – Class 1.2 Storage

EN/ETSI 300 019-2-2 v2.1.2 (1999-09) – Class 2.3 Transportation

EN/ETSI 300 019-2-3 v2.1.2 (2003-04) – Class 3.1e Operational

EN/ETSI 300 753 (1997-10) – Acoustic Noise

ASTM D3580 Random Vibration Unpackaged 1.5G

Warranty

Ltd. 1-year on Hardware

90-days on Software

For warranty details, visit www.extremenetworks.com/go/warranty

ICES-003 Class A (Canada)

European EMC Standards

EN 55022:2006 Class A

EN 55024:A2-2003 Class A includes IEC 61000-4-2, 3, 4, 5, 6, 11

EN 61000-3-2,8-2006 (Harmonics)

EN 61000-3-3 1995+A2:2005 (Flicker)

ETSI EN 300 386 v1.3.3, 2005-04 (EMC Telecommunications)

2004/108/EC EMC Directive


8


Summit 550W AC PSU


Height: 1.5 inches (3.8 cm)

Width: 3.1 inches (7.8 cm)

Depth: 13.3 Inches (33.8 cm)

Weight 3.64 lb (1.65 kg)

Power Specifications

Voltage input range 90 to 264 V

Nominal input ratings 100 to 240 V, 50 to 60 Hz, 8 A

Nominal input current at full loads • 8 A @ 90 V (low-line)• 4 A @ 230 V (high-line)

Line frequency range 47 to 63 Hz

Maximum inrush current 15 A

Output 12 V, 45 A max, 540 Watts 3 V, 3 A max, 10 Watts

Maximum continuous DC output shall not exceed 550 Watts

Power supply input socket IEC 320 C14

Power cord input plug IEC 320 C13

Power supply cord gauge 18 AWG (0.75 mm2) up to 6 feet or 2 meters or 16 AWG (1.0 mm2) over 6 feet

Summit 550W DC PSU


Height: 1.5 inches (3.8 cm)

Width: 3.1 inches (7.8 cm)

Depth: 13.3 Inches (33.8 cm)

Weight 3.22 lb (1.46 kg)

Power Specifications

Nominal Input -48 to -60 VDC, 18 A

DC Voltage Input Range -35 to -75 V

Inrush Current 25A peak

Minimum wire size 14 AWG (1.5 mm2) copper stranded

DC Output 12 V , 37 A/3.3 V, 3 A

DC Output Power (W) 550 W

Power Measured power consumption with direct attach passive copper cables.

PSU Type 100% Traffic

Summit X670V-48t AC 323W

DC 336W

Summit X670V-48t with VIM4-40G4X AC 365W

DC 365W

Extreme Networks Data Sheet: Summit X670 Series

Make Your Network Mobile

© 2012 Extreme Networks, Inc. All rights reserved. Extreme Networks, the Extreme Networks logo, BlackDiamond, Direct Attach, ExtremeXOS, ExtremeXOS ScreenPlay, Ridgeline, Summit and XNV are either registered trademarks or trademarks of Extreme Networks, Inc. in the United States and/or other countries. sFlow is the property of InMon Corporation. All other trademarks are the trademarks of their respective owners. Specifications and product availability are subject to change without notice. 1777_Copper_2 2012/09/20

extremenetworks.com

Corporateand North AmericaExtreme Networks, Inc.3585 Monroe Street Santa Clara, CA 95051 USAPhone +1 408 579 2800

Europe, Middle East, Africaand South AmericaPhone +31 30 800 5100

Asia PacificPhone +65 6836 5437


Ordering InformationPart Number Description

17201 Summit X670V-48t-FB-AC 48 10GBASE-T, 4 10GBASE-X (unpopulated and shared with 4 ports of the 48GBase-T ports), one VIM4 slot (unpopulated), ExtremeXOS Advanced Edge License, 2 Front-to-Back 550W AC power supplies, Front-to-Back airflow fans

17202 Summit X670V-48t-BF-AC 48 10GBASE-T , 4 10GBASE-X (unpopulated and shared with 4 ports of the 48 10GBase-T ports), one VIM4 slot (unpopulated), ExtremeXOS Advanced Edge License, 2 Back-to-Front 550W AC power supplies, Back-to-Front airflow fans

17203 Summit X670V-48t-FB-DC 48 10GBASE-T , 4 10GBASE-X (unpopulated and shared with 4 ports of the 48 10GBase-T ports), one VIM4 slot (unpopulated), ExtremeXOS Advanced Edge License, 2 Front-to-Back 550W DC power supplies, Front-to-Back airflow fans

17204 Summit X670V-48t-BF-DC 48 10GBASE-T , 4 10GBASE-X (unpopulated and shared with 4 ports of the 48 10GBase-T ports), one VIM4 slot (unpopulated), ExtremeXOS Advanced Edge License, 2 Back-to-Front 550W DC power supplies, Back-to-Front airflow fans

17205 Summit X670V-48t-FB-MIX 48 10GBASE-T , 48 10GBASE-T , 4 10GBASE-X (unpopulated and shared with 4 ports of the 48 10GBase-T ports), one VIM4 slot (unpopulated), ExtremeXOS Advanced Edge License, 1 Front-to-Back 550W AC power supply, 1 Front-to-Back 550W DC power supply, Front-to-Back airflow fans Front-to-Back airflow fans

17206 Summit X670V-48t-BF-MIX 48 10GBASE-T , 4 10GBASE-X (unpopulated and shared with 4 ports of the 48 10GBase-T ports), one VIM4 slot (unpopulated), ExtremeXOS Advanced Edge License, 1 Back-to-Front 550W AC power supply, 1 Back-to-Front 550W DC power supply, Back-to-Front airflow fans 550W DC power supply, Front-to-Back airflow fans Front-to-Back airflow fans

17131 Summit X670 Series Core License

17133 Summit X670 MPLS Feature Pack

11011 Direct Attach Feature Pack

17122 VIM4-40G4X, 4 40GBASE-X QSFP+ ports module for Summit X670V

10925 550W AC Power Supply module for Summit switches, Front-to-Back airflow

10926 550W DC Power Supply module for Summit switches, Front-to-Back airflow

10927 550W AC Power Supply module for Summit switches, Back-to-Front airflow

10928 550W DC Power Supply module for Summit switches, Back-to-Front airflow

17111 Fan module for Summit X670 series switches, Front-to-Back airflow, spare

17112 Fan module for Summit X670 series switches, Back-to-Front airflow, spare

10051 1000BASE-SX SFP, LC Connector

10052 1000BASE-LX SFP, LC Connector

10053 1000BASE-ZX SFP, Extra Long Distance SMF 70 km/21 dB Budget, LC Connector

10064 1000BASE-LX100 SFP, Extra Long Distance SMF 100 km/30dB Budget, LC Connector

10301 10GBASE-SR SFP+, 850nm, LC Connector, transmission length of up to 300m on MMF

10302 10GBASE-LR SFP+, 1310nm, LC Connector, transmission length of up to 10km on SMF

10309 10GBASE-ER SFP+, 1550nm, LC Connector, transmission length of up to 40km on SMF

10304 10GBASE-CR SFP+ pre-terminated twin-ax copper cable with link lengths of 1m



10311 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 0.5m length

10312 40 Gigabit Ethernet QSFP+ passive copper cable assembly, 1m length



10315 40 Gigabit Ethernet QSFP+ active optical cable assembly, 10m length

summit x670 series - homeyen€¦ · summit x670 switches also support priority-based flow control...

Documents