swag/pop - shuriken, high performance · pdf fileshuriken power cells are engineered for...
TRANSCRIPT
Shuriken Power Cells are engineered for today’s high-performance mobile audio systems. Utilizing Shuriken’s Absorbed Glass Mat (AGM) technology, these rechargeable power cells can be mounted in any position and will not spill.
The power cells are extremely resistant to excessive heat and strong vibration. They can be discharged and recharged hundreds of times. With super-low ESR and closely packed pure lead plates, each power cell packs a punch. Many Shuriken Power Cells are designed to deliver the winning edge at SPL competitions. Others provide the consistent backup power needed for powerful car stereo systems, especially when parked for parties and shows.
Shuriken batteries can be found powering anything from race cars and cabin cruisers to trolling motors and winches. Shuriken not only provides the constant voltage needed for optimum sound quality and other uses, it limits the draw from the starting battery.
Look to Shuriken for the latest in power cell innovation. Shuriken is a brand of Metra Electronics, the global leader in auto sound and other electronic accessories.
2
12V BATTERY ............................... 3-7
16V BATTERY .................................8
12V MARINE BATTERY......................9
BATTERY PROTECTION .................... 11
TERMINAL SYSTEM .........................12
POWER SUPPLY ............................13
CHARGE SOLUTIONS.......................14
SWAG/POP ...................................15
REFERENCE GUIDE
+ Compact size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Low internal resistance for better mobile electronics performance
600 WATTS20 AMP HOURS
3SK-BT20
13LBS5.9KG
BATTERIES
W7.14”181MM
H6.5”
165MM
D3”
76MM
+ Compact size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Low internal resistance for better mobile electronics performance
700 WATTS28 AMP HOURS
SK-BT28
21 LBS9.5KG
W6.5”
165MM
H6.9”
175MM
D4.92”125MM
+ Compact size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Low internal resistance for better mobile electronics performance
500 WATTS18 AMP HOURS
SK-BT18
12 LBS5.5KG
W7.14”181MM
H6.5”
165MM
D3”
76MM
+ Compact size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be discharged and re-charged 100’s of times
1500 WATTS60 AMP HOURS
SK-BT60
37.5LBS17KG
BATTERIES
W9”
229MM
H8”
203MM
D5.5”
140MM
4
+ Small size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Low internal resistance, which provides for better mobile electronics performance
800 WATTS35 AMP HOURS
SK-BT35
25LBS11.3KG
W7.7”
196MM
H6.46”164MM
D5.12”
130MM
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Low internal resistance
+ Reserve power in a compact size
1250 WATTS45 AMP HOURS
SK-BT45
32LBS14.5KG
W7.76”197MM
H6.5”
165MM
D6.69”169MM
+ Compact size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be discharged and re-charged 100’s of times
1500 WATTS55 AMP HOURS
785 CRANK AMPS
SK-BT8785DT
BATTERIES
40LBS18.1KG
W9”
229MM
H8”
203MM
D5.5”
140MM
5
+ Compact size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be discharged and re-charged 100’s of times
+ Reversed positive and negative terminals for different hook ups
1500 WATTS60 AMP HOURS
SK-BT60RT
37.5LBS17KG
W9”
229MM
H8”
203MM
D5.5”
140MM
+ Full size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be fully discharged and re-charged 100’s of times
1650 WATTS70 AMP HOURS
SK-BT70
40LBS18.1KG
W10.2”
259MM
H9”
229MM
D6.61”
168MM
6
+ Large size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be discharged and re-charged 100’s of times
1800 WATTS80 AMP HOURS
SK-BT80
55LBS25KG
W10.25”260MM
H8”
203MM
D6.75”171MM
+ Large size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Low internal resistance for better mobile electronics performance
2000 WATTS100 AMP HOURS
SK-BT100
60LBS72.2KG
W12”
304MM
H8.5”
216MM
D6.75”171MM
+ Large size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be discharged and re-charged 100’s of times
1750 WATTS75 AMP HOURS
SK-BT75
41LBS18.6KG
W10.2”
259MM
H9”
230MM
D6.6”
168MM
BATTERIES
7
+ Large size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be discharged and re-charged 100’s of times
+ Low internal resistance for better mobile electronics performance
2400 WATTS120 AMP HOURS
SK-BT120
79LBS36KG
W13”
330MM
H8.5”
216MM
D6.75”171MM
+ Large size
+ Absorbed glass mat technology
+ Extreme power reserve
+ Ideal design for SPL systems
+ Can be mounted in any position
4000 WATTS140 AMP HOURS
SK-BT140
91LBS41.3KG
W13.5”
343MM
H11”
280MM
D6.73”171MM
+ Large size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be discharged and re-charged 100’s of times
2200 WATTS110 AMP HOURS
SK-BT110
70LBS31.8KG
W12”
305MM
H9”
229MM
D6.6”
168MM
BATTERIES
8
+ Medium size
+ Absorbed glass mat technology
+ Can be mounted in any position
+ Can be discharged and re-charged 100’s of times
1800 WATTS80 AMP HOURS
SK-BT16V
55LBS25KG
W10.25”260MM
H8”
203MM
D6.75”171MM
BATTERy
+ 12V Marine grade battery
+ Absorbed glass mat technology
+ Threaded posts
+ Can be discharged and re-charged 100’s of times
+ 12V Marine grade battery
+ Absorbed glass mat technology
+ Threaded & standard posts
+ Can be discharged and re-charged 100’s of times
190 MIN RESERVE100 AMP HOURS
120 MIN RESERVE55 AMP HOURS
800A COLD CRANK785A COLD CRANK
SK-MBT-100SK-MBT-55
42.5LBSI9.3KG
W10.75"273MM
H6.89"175MM
D6.61"
168MM
68.3LBS3IKG
W13"
330MM
H8.54"217MM
D6.85"174MM
MARINE GRADE
9
10
11
BOX FITS BATTERY
SK-BT20-BX SK-BT18 & SK-BT20
SK-BT35-BX SK-BT35
SK-BT45-BX SK-BT45
SK-BT60-BX SK-BT60 & SK-BT60RT
SK-BT80-BX SK-BT80
SK-BT100-BX SK-BT100
SK-BT120-BX SK-BT120
SK-BT140-BX SK-BT140
SK-BT8785DT-BX SK-8785DT
SK-BT16V-BX SK-BT16V
Shuriken Battery Boxes are constructed from heavy gauge steel powder coated for an indestructible finish. The design has holed flanges at the bottom for permanent mounting. The Shuriken Battery Boxes also have pre-cut slots that can be used for hold down straps.
PRoTECT yoUR BATTERy FRoM hEAT AND KEEP IT IN PoSITIoN wITh ShURIKEN BATTERy BoxES
BATTERy BoxES
BATTERY PROTECTION
3 Wing Nut sets (positive and negative). Short mounting posts replace the SAE posts. Medium mounting posts are for the battery. Long mounting posts mount the adapter to the battery.
2 SAE post sets (Positive and negative). Shorter mounting post isfor the batteries alone. The Longmounting post is to be used to mount the adapter to the battery.
Power Terminal Adapter
Use SK-WN120 Wing Nut Set• Battery & Wing Nut Set sold separately
Power Terminal Adapter
Use SK-WN35-100 Wing Nut Set• Battery & Wing Nut Set sold separately
The SAE post is removable and can be replaced by the wing nut set. You can use the OE bolt to attach the adapter or use the optional SAE post or Wing Nut posts.
Power Terminal Systems are a positive and negative top SAE post / side post adapter.
SK-wN20SK-wN120SK-wN35-100
SK-SAE20SK-SAE120SK-SAE35-100
SK-BTA120SK-BTA35-100
TERMINAL SYSTEM
12
SUPPLY / MAINTAIN / STORAGE
+ 55 Amp Power Supply
+ 780 Watts Max Output
+ DC Output Voltage 13.6V/14.4 (D C)
+ Output Voltage Tolerance + or - .7%
+ 7 AMPS Max AC Current @ 108VAC
+ Input Voltage Range 105-135 AC
+ 75 Amp Power Supply
+ 1065 Watts Max Output
+ DC Output Voltage 13.6V/14.4 (D C)
+ Output Voltage Tolerance + or - .7%
+ 12 AMPS Max AC Current @ 108VAC
+ Input Voltage Range 105-135 AC
780 WATTS55 AMPS
1065 WATTS75 AMPS
IBPS55 IBPS75
7LBS3.2KG
9LBS4KG
W7.2”
183MM
W7.2”
183MM
H3.5”
89MM
H3.5”
89MM
D10.5”183MM
D10.5”183MM
13
+ 35 Amp Power Supply
+ 430 Watts Max Output
+ DC Output Voltage 13.6V/14.4 (D C)
+ Output Voltage Tolerance + or - .7%
+ 5 AMPS Max AC Current @ 108VAC
+ Input Voltage Range 105-135 AC
430 WATTS35 AMPS
IBPS35
7LBS3.2KG
W7.2”
183MM
H3.5”
89MM
D10.5”
267MM
+ 100 Amp Power Supply
+ 1440 Watts Max Output
+ DC Output Voltage 13.6V/14.4 (D C)
+ Output Voltage Tolerance + or - .7%
+ 13 AMPS Max AC Current @ 108VAC
+ Input Voltage Range 105-135 AC
1440 WATTS100 AMPS
IBPS100
11LBS5KG
W7.2”
183MM
H3.5”
89MM
D10.5”183MM
+ CTEK US800
+ Designed for 12V Batteries
+ Delivers .8 amps of maintaining / charging current and designed to charge batteries as big as 32 aH
+ Comes with a quick disconnect plus with M6 (6.4 mm) ring terminals and spring clamps
+ Low internal resistance for better mobile electronics performance
The 56-263 lets you plug into the cigarette lighter of your vehicle to charge your battery and the other end into the quick disconnect ofa CTEK charger. For those owners of Imports, there is even an adapter so the 56-263 fits snugly into the cigarette lighter.
With a 6.4mm inner ring diameter the 56-260 is the perfect size to attach to most battery terminals. With the quick disconnect plug, the 56-260 can be permanently connected to your battery while making the connection to a CTEK charger a breeze. Comes with CTEK chargers.
With a 8.4mm inner ring diameter the 56-382 is the perfect size to attach to most battery terminals. With the quick disconnect plug, the 56-382 can be permanently connected to your battery while making the connection to a CTEK charger a breeze.
+ CTEK Multi US3300
+ Delivers .8 amps of maintaining / charging current for small batteries and 3.3 amps for large - designed to charge batteries as big as 75 aH
+ Comes with a quick disconnect plus with M6 (6.4 mm) ring terminals and spring clamps
+ 4 Step, fully automatic charging
+ CTEK Multi US7002
+ Delivers 7 amps of maintaining / charging current and designed to charge batteries as big as 150 aH
+ Comes with a quick disconnect plus with M6 (6.4 mm) ring terminals and spring clamps
+ 8 Step, fully automatic charging
CTEK chargers are designed to slowly charge your battery, to ensure your battery gets the deepest, strongest charge possible. But it does more then that; it’s designed to be a maintenance charger for owners of vehicles that are stored or not used often. From a motorcycle to an RV, CTEK has a solution. Plus there are accessories that will make the CTEK chargers more convenient and easier to use.
56-213
56-263 56-260 56-382
56-158 56-353
SOLUTIONS
14
15
BANNERS+ High quality printed banner+ Includes reinforced holes for hanging+ Dimensions: 48” x 24”
SK-BANR
STICKERS
+ Black diecut vinyl, 5.75” x 1.5”
SK-STKRB
T ShIRTS
+ Black shirt with white/red screenprint on front & back
SK-ShRT13-L LarGeSK-ShRT13-xL X-LarGe
Floor Standing rack
7 Heavy Duty Shelves
Strong Metal Frame
Includes Top Graphicand 2 Side Graphics
SK-RACK
EZUP
W31.25”0.79M
H81”
2.05M
D12”
0.30M
Corporate Headquarters:
Metra Electronics Corporation
460 Walker Street
Holly Hill, FL 32117
800-221-0932
shurikenonline.com
metradealer.com
© Copyright 2014 - Metra Electronics Corporation
ShURBRoCh-14