system passport external pedestrian doorset - avekmet · ift system passport external pedestrian...
TRANSCRIPT
ift System Passport External pedestrian doorset as per EN 14351-1 No. 10-001953-SP04-C01-99-en-01 Valid until September 2014
08-0
3 / 7
19
Characteristics Resistance
to wind load
Resistance to snow and permanent
load1)
Reaction to fire1)
Watertight-ness
Dangerous substances2)
Impact resistance
Load-bearing capacity of safety devices
Class / Value up to C3 Not
applicable Not
applicable up to 5A country specific 1
Not applicable
Characteristics Height and width3)
Ability to release
Acoustic performance
Thermal transmittance
Radiation properties
Air permeability
Operating forces
Class / Value order related
Requirement fulfilled
Rw (C;Ctr) to 43 (-1;-4) dB
Standard pro-cedure
CE mark glazing 2 2
Characteristics Mechanical strength
Ventilation Bullet resistance
Explosion resistance
Durability/ Resistance to
repeated opening and
closing
Behaviour be-tween
different climates
Burglar resistance
Class / Value 3 npd npd npd 5 npd up to WK3
Basis
EN 14351-1:2006 + A1:2010 Windows and external pedes-trian doorsets
ift Certification Scheme for windows and external pedes-trian doorsets (QM320)
Certification and surveillance contract No. 181 6037601
Instructions for use
The ift System Passport pro-vides evidence of the general performance of the designated product families as set out by the product standard. The val-ues/classes indicated refer both to the specific object de-scribed in the individual evi-dence of performance and the scope/field of application de-fined by the ift system pass-port. Application of the performance characteristics is subject to the national technical regulations and the respective contractual provisions. This system passport forms the basis for preparing the manufacturer ITT test report summary and for issuing the ift Certificate of Conformity, which documents the conformity of the finished products and the factory quality/production con-trol through regular third-party audits of the manufacturers conducted by the ift Rosen-heim. Notes on publication
The "Conditions and Guidance on the Use of ift Test Docu-ments“ apply.
Contents
The system passport com-prises a total of 42 pages:
1 Summary of performance characteristics as per EN 14351-1 2
2 Overview of performance of the individual product families 3
3 Performance characteristics according to the product standard 37
4 General instructions for the ift system passport 40
5 Special instructions for use 41
SCHÜCO International KG Karolinenstraße 1-15
33609 Bielefeld
System Schüco ADS 70.HI / ADS 70 RL.HI / ADS 70 SL.HI
Schüco ADS 70 HD / ADS 70 HD RL / ADS 70 HD SL
Special features None
Product families 1. Single-leaf external pedestrian doorset, opening inwards 2. Single-leaf external pedestrian doorset, opening out-
wards 3. Double-leaf external pedestrian doorset, opening inwards
4. Double-leaf external pedestrian doorset, opening out-wards
Frame material Aluminium, white
1) does not apply to external pedestrian doorsets 2) evidence as set out by country of destination 3) clear opening dimensions as specified by manufacturer
ift Rosenheim 9. January 2012
Christian Kehrer, Dipl.-Ing. (FH) Head Certification & Surveillance Body
Robert Krippahl, Dipl.-Ing. (FH) Deputy Head of Testing Department Building Components
Pascal Geiger, Dipl.-Ing. (FH) Operating Product Officer Building Components
ift- System Passport : External pedestrian doorset as per EN 14351-1
Client SCHÜCO International KG, 33609 Bielefeld
* The detailed evidence can be specified in the matrix of the individual product families and the associated test reports.
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
1 Summary of performance characteristics as per EN 14351-1
No. Characteristics as per EN 14351-1 Product family 1 Product family 2 Product family 3 Product family 4
Single,
opening inwards Single,
opening outwards Double,
opening inwards Double,
opening outwards
4.2
Resistance to wind load (1) C1 to C3 C1 to C2 C1 to C2 C1 to C2
4.3
Resistance to snow and permanent load (only roof windows)
not applicable not applicable not applicable not applicable
4.4
Reaction to fire not applicable not applicable not applicable not applicable
4.5
Watertightness 2A to 5A 2A to 5A npd up to 3A
4.6
Dangerous substances see 3.6 see 3.6 see 3.6 see 3.6
4.7
Impact resistance 1 1 1 1
4.8
Load-bearing capacity of safety devices not applicable not applicable not applicable not applicable
4.9
Height and width (only external pedestrian door-sets)
order-related order-related order-related order-related
4.10
Ability to release (only external pedestrian door-sets)
not applicable Requirement
fulfilled not applicable Requirement
fulfilled
4.11
Acoustic performance (2) Rw (C;Ctr) to 42 (-1;-4) dB
Rw (C;Ctr) to 43 (-1;-4) dB
npd npd
4.12
Thermal transmittance The UD values shall be determined on the basis of standard dimensions
1.23 m x 2.18 m ≤ overall area of 3.6 m2 2.00 m x 2.18 m > overall area of 3.6 m2 or for the purpose-designed system.
4.13
Radiation properties Evidence of total energy transmittance and light transmittance to be provided for the purpose de-
signed system via the CE marking of the glazing.
4.14
Air permeability 2 2 2 2
4.16
Operating forces 2 2 2 2
4.17
Mechanical strength 3 3 3 3
4.18
Ventilation npd npd npd npd
4.19
Bullet resistance npd npd npd npd
4.20
Explosion resistance npd npd npd npd
4.21
Durability test 5 5 5 5
4.22
Behaviour between different climates npd npd npd npd
4.23
Burglar resistance (3) Up to WK3 Up to WK3 Up to WK3 Up to WK3
Note: The listed performance characteristics represent the product characteristics of the specimens tested. The possibility of combining performance characteristics must be verified in each individual case. Superscripts see Section 5
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 3 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
2 Overview of performance characteristics of the in dividual product families
2.1 Product family 1:
This brief description lists the significant system features of product family 1. For details of the purpose-designed versions refer to the respective test reports.
Variants Single-leaf external pedestrian doorset, o pening inwards, with/without side panel, with/without fanlight
Frame material aluminium, white
Profile depth 70 mm
Frame joints frame member: mitred to corner connector, nailed and bonded leaf/casement member: mitred/butt-jointed to corner connector / T-cleat, nailed and bonded
Rebate design single rebate
Floor joint 1 Item No.: 224203 res. 171230, threshold, Schüco
Threshold seal Item No.: 227149 integrated in 188060, butt-jointed supplier: SCHÜCO
Floor joint 2 Item No.: 224203 res. 171230, threshold, SCHÜCO
Threshold seal Item No.: 244654, butt-jointed supplier: SCHÜCO
Seals/gaskets
Frame member seal Item No.: 224683, on three sides, EPDM, cut to mitre and bonded supplier: SCHÜCO
Leaf/casement member seal Item No.: 224683, on four sides, EPDM, cut to mitre and bonded supplier: SCHÜCO
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 4 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Hardware
Lock Item No.: 241256 / 241257, tubular frame lock, supplier: SCHÜCO
Main strike plate Item No.: 239355, flat strike plate supplier: SCHÜCO
Hinge Item No.: 239013, surface-mounted door hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239052, surface-mounted door hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239584, butt hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239663, butt hinge, three-part, 2 pcs. Supplier: SCHÜCO
Further hardware variants as specified in the lock and strikers list dated 21.12.2010, re-tained at the ift Rosenheim, including the followin g design variants:
- Latch and bolt lock
Antipanic latch and bolt lock
Antipanic set
- 2-point hook-bolt lock
- 2-point hook-bolt and bolt lock
Antipanic 2-point hook-bolt and bolt lock
- 5-point latch and bolt lock “SafeMatic“
Antipanic 4-point latch and bolt lock ”SafeMatic“
- 3-point latch and bolt lock "InterLock“
Antipanic 3-point latch and bolt lock "InterLock“
Antipanic set 3-point latch and bolt lock "InterLock“
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 5 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Infill panel Insulating glass unit (IGU), glass thickness: 24 mm
Seals/gaskets internal Item No.: 224378, lip seal, EPDM supplier: SCHÜCO Item No.: 224350, lip seal, EPDM supplier: SCHÜCO
Seals/gaskets external Item No.: 224063, lip seal, EPDM supplier: SCHÜCO Item No.: 224350, lip seal, EPDM supplier: SCHÜCO Item No.: 224259, lip seal, EPDM supplier: SCHÜCO
Depending on glazing thickness and subject to ident ical material proper-
ties/characteristics and geometries as tested, glas s seals/gaskets of different thick-
nesses can be used. Glazing table as of 21.12.2010 retained at the ift Rosenheim.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 6 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
2.1.1 Overview of performance characteristics of pr oduct family 1
Types of opening: Side-hung/hinged, single pedestrian doorset, opening inwards, with/without side panel, with/without fanlight
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset: flush-fitted Overall frame dimensions: 1,198 mm x 2,357 mm
Expert statement 255 35239
ift Rosenheim
C2
Side-hung/hinged pedestrian doorset, face-fitted: Overall frame dimensions: 1,198 mm x 2,357 mm
Expert statement 255 37791
ift Rosenheim
C3
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 1,758 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C1 / C2*
4.2
Resistance to wind load(1)
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 1,198 mm x 2,820 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C2
Extrapolation for –100 % of frame width and frame height of test specimen
4.3
Resistance to snow and
permanent load
- - not applicable -
4.4
Reaction to fire
- - not applicable -
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 7 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset: flush-fitted Overall frame dimensions: 1,198 mm x 2,357 mm
Expert statement 255 35239
ift Rosenheim
4A
Side-hung/hinged pedestrian doorset: face-fitted Overall frame dimensions: 1,198 mm x 2,357 mm
Expert statement 255 37791
ift Rosenheim
5A
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 1,758 mm x 2,357 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
2A
4.5
Watertightness
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 1,198 mm x 2,820 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
3A
Extrapolation for -100% to +50% of overall area of test specimen
4.6
Dangerous substances
see Section 3.6 - country specific -
4.7
Impact resistance
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 1,198 mm x 2,357 mm
Test report 201 35238/3
ift Rosenheim 1
> overall area of test specimen (infill panel)
4.8
Load-bearing capacity of
safety devices
- - not
applicable - 100 % of test speci-men overall area
4.9
Height and width
- - order
related -
4.10
Ability to release
- - not applicable -
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 8 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset with threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 26 mm Glass configuration: 6/16 Ar/4 RW, glass: 35 dB
Expert statement 175 38049
ift Rosenheim
36 (-2; -5)
Side-hung/hinged pedestrian doorset with threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 34 mm Glass configuration: 8 LSG SI/20 Ar/6 RW, glass: 43 dB
Expert statement 175 38049
ift Rosenheim
40 (-2; -5)
Side-hung/hinged pedestrian doorset with threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 44 mm Glass configuration: 12 LSG SI/24 Ar/8 LSG SI RW, glass: 50 dB
Expert statement 175 38049
ift Rosenheim
42 (-1; -4)
Side-hung/hinged pedestrian doorset without threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 26 mm Glass configuration: 6/16 Ar/4 RW, glass: 35 dB
Expert statement 175 38049
ift Rosenheim
35 (-1; -4)
Side-hung/hinged pedestrian doorset without threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 34 mm Glass configuration: 8 LSG SI/20 Ar/6 RW, glass: 43 dB
Expert statement 175 38049
ift Rosenheim
39 (-2; -5)
Side-hung/hinged pedestrian doorset without threshold - with additional brush: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 34 mm Glass configuration: 8 LSG SI/20 Ar/6 RW, glass: 43 dB
Expert statement 175 38049
ift Rosenheim
40 (-2; -5)
4.11
Acoustic performance(2)
Side-hung/hinged pedestrian doorset without threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 44 mm Glass configuration: 12 LSG SI/24 Ar/8 LSG SI RW, glass: 50 dB
Expert statement 175 38049
ift Rosenheim
40 (-1; -3)
Seal on four sides: extrapolation for -100% to +50% of test specimen overall area Seal on three sides: extrapolation for -100% of test speci-men overall area
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 9 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset without threshold:, with additional brush: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 44 mm Glass configuration: 12 LSG SI/24 Ar/8 LSG SI RW, glass: 50 dB
Expert statement 175 38049
ift Rosenheim
42 (-1; -4)
4.12
Thermal transmittance
Thermal break metal profiles from a door sys-tem, profile combination: frame – leaf/casement - threshold: Frame member: 372210 Uf = 2.0 W/(m2.K)
Frame member: 372220 Leaf/casement member: 372310 Uf = 1.8 W/(m2.K)
Frame member: 372200 Leaf/casement member: 372310 Uf = 2.1 W/(m2.K)
Frame member: 372200 + 372270 Leaf/casement member: 372310 Uf = 1.9 W/(m2.K)
Leaf/casement member: 372310 Schwelle: 224203 Uf = 1.7 W/(m2.K)
Leaf/casement member: 372310 Schwelle: 128480 Uf = 3.6 W/(m2.K)
Leaf/casement member: 372310 Uf = 2.5 W/(m2.K)
Leaf/casement member: 397270 Schwelle: 171230 Uf = 2.4 W/(m2.K)
Leaf/casement member: 397270 Schwelle: 184840 Uf = 2.1 W/(m2.K)
Leaf/casement member: 397270 Uf = 2.3 W/(m2.K)
Test report 422 35688/2
ift Rosenheim
Evidence for purpose-
designed unit
Calculation of UD is based on EN ISO 10077-1: For calculation, the fol-lowing extrapolation rule applies: test specimen dimen-sions: 1.23 m x 2.18 m ≤ overall area 3.6 m2 test specimen: 2.00 m x 2.18 m > overall area 3.6 m2
4.13
Radiation prop-erties
All CE mark of
glazing
Evidence for purpose-
designed unit -
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 10 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset, flush-fitted: Overall frame dimensions: 1,198 mm x 2,357 mm
Expert statement 255 35239
ift Rosenheim
2
Side-hung/hinged pedestrian doorset, face-fitted: Overall frame dimensions: 1,198 mm x 2,357 mm
Expert statement 255 37791
ift Rosenheim
2
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 1,758 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
1 / 2*
4.14
Air permeability
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 1,198 mm x 2,820 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
2
Seal on four sides: extrapolation for -100% to +50% of test specimen overall area Seal on three sides: extrapolation for -100% of test speci-men overall area Dichtung an drei Seiten: Übertragung auf -100% der Gesamtfläche des Prüfkörpers
4.16
Operating forces
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 1,198 mm x 2,357 mm
Test report 201 35238/2
ift Rosenheim 2
Extrapolation for -100% of overall area of test specimen
4.17
Mechanical strength
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 1,198 mm x 2,357 mm
Test report 201 35238/3
ift Rosenheim 3
Extrapolation for -100% of overall area of test specimen
4.18
Ventilation
- - npd Same design and size of ventilation device
4.19
Bullet resistance
- - npd
Until relevant stan-dards and/or guide-lines are in place, un-determined conditions shall be agreed on by the manufacturer and the testing body.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 11 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.20
Explosion resistance
- - npd
Until relevant stan-dards and/or guide-lines are in place, un-determined conditions shall be agreed on by the manufacturer and the testing laboratory.
4.21
Resistance to repeated
opening and closing
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 1,198 mm x 2,357 mm
Test report 201 35238/3
ift Rosenheim 5
Extrapolation for -100% of overall area of test specimen
4.22
Behaviour between
different climates
- - npd Test specimen: 1.23 m X 2.18 m
Expert statement 255 36163
ift Rosenheim
WK2
4.23
Burglar resistance(3)
as per expert statements (GAS) and individual evidence/reports
Expert statement 255 41995
ift Rosenheim
WK3
See ENV 1627
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 12 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
2.2 Product family 2:
This brief description lists the significant system features of product family 2. For details of the purpose-designed versions refer to the respective test reports.
Variants Single-leaf external pedestrian doorset, o pening outwards, with/without side panel, with/without fanlight
Frame material aluminium, white
Profile depth 70 mm
Frame joints frame member: mitred to corner connector, nailed and bonded leaf/casement member: mitred/butt-jointed to corner connector / T-cleat, nailed and bonded
Rebate design single rebate
Floor joint 1 Item No.: 224203 res. 171230, threshold, SCHÜCO
Threshold seal Item No.: 227149 integrated in 188060, butt-jointed supplier: SCHÜCO
Floor joint 2 Item No.: 224203 res. 171230, threshold, SCHÜCO
Threshold seal Item No.: 244654, butt-jointed supplier: SCHÜCO
Seals/gaskets
Frame member seal Item No.: 224683, on three sides, EPDM, cut to mitre and bonded supplier: SCHÜCO
Leaf/casement member seal Item No.: 224683, on four sides, EPDM, cut to mitre and bonded supplier: SCHÜCO
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 13 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Hardware
Lock Item No.: 241256 / 241257, tubular frame lock, supplier: SCHÜCO
Main strike plate Item No.: 239355, flat strike plate supplier: SCHÜCO
Hinge Item No.: 239013, surface-mounted door hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239052, surface-mounted door hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239584, butt hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239663, butt hinge, three-part, 2 pcs. supplier: SCHÜCO
Further hardware variants as specified in the lock and strikers list dated 21.12.2010, re-tained at the ift Rosenheim, including the followin g design variants:
- Latch and bolt lock
Antipanic latch and bolt lock
Antipanic set
- 2-point hook-bolt lock
- 2-point hook-bolt and bolt lock
Antipanic 2-point hook-bolt and bolt lock
- 5-point latch and bolt lock ”SafeMatic“
Antipanic 4-point latch and bolt lock ”SafeMatic“
- 3-point latch and bolt lock "InterLock“
Antipanic 3-point latch and bolt lock "InterLock“
Antipanic set 3-point latch and bolt lock "InterLock“
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 14 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Infill panel Insulating glass unit (IGU), glass thickness: 24 mm
Seals/gaskets internal Item No.: 224378, lip seal, EPDM supplier: SCHÜCO Item No.: 224350, lip seal, EPDM supplier: SCHÜCO
Seals/gaskets external Item No.: 224063, lip seal, EPDM supplier: SCHÜCO Item No.: 224350, lip seal, EPDM supplier: SCHÜCO Item No.: 224259, lip seal, EPDM supplier: SCHÜCO
Depending on glazing thickness and subject to ident ical material properties/ character-
istics and geometries as tested, glass seals/gasket s of different thicknesses can be
used. Glazing table as of 21.12.2010 retained at th e ift Rosenheim.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 15 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
2.2.1 Overview of performance characteristics of pr oduct family 2
Types of opening: Side-hung/hinged, single pedestrian doorset, opening outwards, with/without side panel, with/without fanlight
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset, flush-fitted: Overall frame dimensions: 1,198 mm x 2,557 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C2 / C2*
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 1,758 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C1 / C2* 4.2
Resistance to wind load(1)
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 1,198 mm x 2,820 mm
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C2
Extrapolation for –100 % of frame width and frame height of test specimen
4.3
Resistance to snow and
permanent load
- - not applicable -
4.4
Reaction to fire
- - not applicable -
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 16 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset, flush-fitted: Overall frame dimensions: 1,198 mm x 2,357 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
4A / 5A*
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 1,758 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
2A* 4.5
Watertightness
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 1,198 mm x 2,820 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
4A
Extrapolation for -100% to +50% of overall area of test specimen
4.6
Dangerous substances
see Section 3.6 - country specific -
4.7
Impact resistance
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 1,198 mm x 2,357 mm
Test report 201 35238/3
ift Rosenheim 1
> overall area of test specimen (infill panel)
4.8
Load-bearing capacity of
safety devices
- - not
applicable - 100 % of test speci-men overall area
4.9
Height and width
- - order
related -
4.10
Ability to release
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: min. 800 mm up to max. 1,400 mm x 3,000 mm / each leaf max. leaf weight 200 kg
Test report 10-001953-
PB01-C01-03-de-01
ift Rosenheim
Requirement fulfilled
-
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 17 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset with threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 26 mm Glass configuration: 6/16 Ar/4 RW, glass: 35 dB
Expert statement 175 38049
ift Rosenheim
36 (-1; -4)
Side-hung/hinged pedestrian doorset with threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 34 mm Glass configuration: 8 LSG SI/20 Ar/6 RW, glass: 43 dB
Expert statement 175 38049
ift Rosenheim
40 (-1; -5)
Side-hung/hinged pedestrian doorset with threshold: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 34 mm Glass configuration: 8 LSG SI/20 Ar/6 RW, glass: 43 dB
Expert statement 175 38049
ift Rosenheim
42 (-1; -4)
Side-hung/hinged pedestrian doorset with threshold, Leaf/casement member continuous around perimeter: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 44 mm Glass configuration: 12 LSG SI/24 Ar/8 LSG SI RW, glass: 50 dB
Expert statement 175 38049
ift Rosenheim
36 (-2; -4)
Side-hung/hinged pedestrian doorset with threshold, Leaf/casement member continuous around perimeter: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 26 mm Glass configuration: 6/16 Ar/4 RW, glass: 35 dB
Expert statement 175 38049
ift Rosenheim
41 (-2; -6)
4.11
Acoustic performance (2)
Side-hung/hinged pedestrian doorset with threshold, Leaf/casement member continuous around perimeter: Overall frame dimensions: 990 mm x 2,110 mm Glass thickness: 34 mm Glass configuration: 8 LSG SI/20 Ar/6 RW, glass: 43 dB
Expert statement 175 38049
ift Rosenheim
43 (-1; -4)
Seal on four sides: extrapolation for -100% to +50% of test specimen overall area Seal on three sides: extrapolation for -100% of test speci-men overall area
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 18 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.12
Thermal transmittance
Thermal break metal profiles from a door system, profile combination: frame – leaf/casement - threshold: Frame member: 372210 Uf = 2.0 W/(m2.K)
Frame member: 372220 Leaf/casement member: 372310 Uf = 1.8 W/(m2.K)
Frame member: 372200 Leaf/casement member: 372310 Uf = 2.1 W/(m2.K)
Frame member: 372200 + 372270 Leaf/casement member: 372310 Uf = 1.9 W/(m2.K)
Leaf/casement member: 372310 Threshold: 224203 Uf = 1.7 W/(m2.K)
Leaf/casement member: 372310 Threshold: 128480 Uf = 3.6 W/(m2.K)
Leaf/casement member: 372310 Uf = 2.5 W/(m2.K)
Leaf/casement member: 397270 Threshold: 171230 Uf = 2.4 W/(m2.K)
Leaf/casement member: 397270 Threshold: 184840 Uf = 2.1 W/(m2.K)
Leaf/casement member: 397270 Uf = 2.3 W/(m2.K)
Test report 422 35688/2
ift Rosenheim
Evidence for purpose-
designed unit
Calculation of UD is based on EN ISO 10077-1: For calculation, the fol-lowing extrapolation rule applies: test specimen dimen-sions: 1.23 m x 2.18 m ≤ overall area 3.6 m2 test specimen: 2.00 m x 2.18 m > overall area 3.6 m2
4.13
Radiation properties
All CE mark of
glazing
Evidence for purpose-
designed unit -
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 19 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset, flush-fitted: Overall frame dimensions: 1,198 mm x 2,357 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
2*
Side-hung/hinged doorset with side panel: Overall frame dimensions: 1,758 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
1 / 2* 4.14
Air permeability
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 1,198 mm x 2,820 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
2*
Seal on four sides: extrapolation for -100% to +50% of test specimen overall area Seal on three sides: extrapolation for -100% of test speci-men overall area
4.16
Operating forces
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 1,198 mm x 2,357 mm
Test report 201 35238/2
ift Rosenheim 2
Extrapolation for -100% of overall area of test specimen
4.17
Mechanical strength
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 1,198 mm x 2,357 mm
Test report 201 35238/3
ift Rosenheim 3
Extrapolation for -100% of overall area of test specimen
4.18
Ventilation
- - npd Same design and size of ventilation device
4.19
Bullet resistance
- - npd
Until relevant stan-dards and/or guide-lines are in place, un-determined conditions shall be agreed on by the manufacturer and the testing laboratory.
4.20
Explosion resistance
- - npd
Until relevant stan-dards and/or guide-lines are in place, un-determined conditions shall be agreed on by the manufacturer and the testing laboratory.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 20 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.21
Resistance to repeated
opening and closing
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 1,198 mm x 2,357 mm
Test report 201 35238/3
ift Rosenheim 5
Extrapolation for -100% of overall area of test specimen
4.22
Behaviour between
different climates
- - npd Test specimen: 1.23 m X 2.18 m
Expert statement 255 36163
ift Rosenheim
WK2
4.23
Burglar resistance(3)
as per expert statements (GAS) and individual evidence/reports
Expert statement 255 41995
ift Rosenheim
WK3
See ENV 1627
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 21 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
2.3 Product family 3:
This brief description lists the significant system features of product family 3. For details of the purpose-designed versions refer to the respective test reports.
Variants Double-leaf external pedestrian doorset, o pening inwards, with/without side panel, with/without fanlight
Frame material aluminium, white
Profile depth 70 mm
Frame joints frame member: mitred to corner connector, nailed and bonded leaf/casement member: mitred/butt-jointed to corner connector / T-cleat, nailed and bonded
Rebate design single rebate
Floor joint 1 Item No.: 224203 res. 171230, threshold, SCHÜCO
Threshold seal Item No.: 227149 integrated in 188060, butt-jointed supplier: SCHÜCO
Floor joint 2 Item No.: 224203 res. 171230, threshold, SCHÜCO
Threshold seal Item No.: 244654, butt-jointed supplier: SCHÜCO
Seals/gaskets
Frame member seal Item No.: 224683, on three sides, EPDM, cut to mitre and bonded supplier: SCHÜCO
Leaf/casement member seal Item No.: 224683, on four sides, EPDM, cut to mitre and bonded supplier: SCHÜCO
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 22 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Hardware Variant 1
Lock Item No.: 241256 / 241257, tubular frame lock, supplier: SCHÜCO
Main strike plate Item No.: 239355, flat strike plate supplier: SCHÜCO
Hinge Item No.: 239013, surface-mounted door hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239052, surface-mounted door hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239584, butt hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239663, butt hinge, three-part, 2 pcs supplier: SCHÜCO
Hardware Variant 2
Lock of active leaf Item No.: 241255, tubular frame lock supplier: SCHÜCO
Lock of inactive leaf Item No.: 209600, shoot bolt with Item No.: 239353, espagnolette bolt supplier: SCHÜCO
Further hardware variants as specified in the lock and strikers list dated 21.12.2010, re-tained at the ift Rosenheim, including the followin g design variants:
- Latch and bolt lock
Antipanic latch and bolt lock
Antipanic set
- 2-point hook-bolt lock
- 2-point hook-bolt and bolt lock
Antipanic 2-point hook-bolt and bolt lock
- 5-point latch and bolt lock “SafeMatic“
Antipanic 4-point latch and bolt lock ”SafeMatic“
- 3-point latch and bolt lock "InterLock“
Antipanic 3-point latch and bolt lock "InterLock“
Antipanic set 3-point latch and bolt lock "InterLock“
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 23 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Infill panel Insulating glass unit (IGU), glass thickness: 24 mm
Seals/gaskets internal Item No.: 224378, lip seal, EPDM supplier: SCHÜCO Item No.: 224350, lip seal, EPDM supplier: SCHÜCO
Seals/gaskets external Item No.: 224063, lip seal, EPDM supplier: SCHÜCO Item No.: 224350, lip seal, EPDM supplier: SCHÜCO Item No.: 224259, lip seal, EPDM supplier: SCHÜCO
Depending on glazing thickness and subject to ident ical material properties/ character-
istics and geometries, glass seals/gaskets of diffe rent thicknesses can be used as
tested. Glazing table as of 21.12.2010 retained at the ift Rosenheim.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 24 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
2.3.1 Overview of performance characteristics of pr oduct family 3
Types of opening: Side-hung/hinged, double pedestrian doorset, opening inwards, with/without side panel, with/without fanlight
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset: flush-fitted Overall frame dimensions: 2,298 mm x 2,357 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C1 / C2*
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 2,858 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C1* 4.2
Resistance to wind load(1)
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 2,328 mm x 2,820 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C1 / C2*
Extrapolation for –100 % of frame width and frame height of test specimen
4.3
Resistance to snow and
permanent load
- - not applicable -
4.4
Reaction to fire
- - not applicable -
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 25 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.5
Watertightness
- - npd
Extrapolation for -100% to +50% of overall area of test specimen
4.6
Dangerous substances
see Section 3.6 - country specific -
4.7
Impact resistance
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: 1,100 mm x 2,300 mm
Test report 201 35238/3
ift Rosenheim 1
> overall area of test specimen (infill panel)
4.8
Load-bearing capacity of
safety devices
- - not
applicable - 100 % of test speci-men overall area
4.9
Height and width
- - order
related -
4.10
Ability to release
- - not applicable -
4.11
Acoustic performance(2)
- - npd
Seal on four sides: extrapolation for -100% to +50% of test specimen overall area Seal on three sides: extrapolation for -100% of test speci-men overall area
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 26 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.12
Thermal transmittance
Thermal break metal profiles from a door sys-tem, profile combination: frame – leaf/casement - threshold Frame member: 372210 Uf = 2.0 W/(m2.K)
Frame member: 372220 Leaf/casement member: 372310 Uf = 1.8 W/(m2.K)
Frame member: 372200 Leaf/casement member: 372310 Uf = 2.1 W/(m2.K)
Frame member: 372200 + 372270 Leaf/casement member: 372310 Uf = 1.9 W/(m2.K)
Leaf/casement member: 372310 Threshold: 224203 Uf = 1.7 W/(m2.K)
Leaf/casement member: 372310 Threshold: 128480 Uf = 3.6 W/(m2.K)
Leaf/casement member: 372310 Uf = 2.5 W/(m2.K)
Leaf/casement member: 397270 Threshold: 171230 Uf = 2.4 W/(m2.K)
Leaf/casement member: 397270 Threshold: 184840 Uf = 2.1 W/(m2.K)
Leaf/casement member: 397270 Uf = 2.3 W/(m2.K)
Test report 422 35688/2
ift Rosenheim
Evidence for purpose-
designed unit
Calculation of UD is based on EN ISO 10077-1: For calculation, the fol-lowing extrapolation rule applies: test specimen dimen-sions: 1.23 m x 2.18 m ≤ overall area 3.6 m2 test specimen: 2.00 m x 2.18 m > overall area 3.6 m2
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 27 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.13
Radiation properties
All CE mark of
glazing
Evidence for purpose-
designed unit -
Side-hung/hinged pedestrian doorset: flush-fitted Overall frame dimensions: 2,298 mm x 2,357 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
1 / 2*
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 2,858 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
1 / 2* 4.14
Air permeability
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 2,328 mm x 2,820 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
1 / 2*
Seal on four sides: extrapolation for -100% to +50% of test specimen overall area Seal on three sides: extrapolation for -100% of test speci-men overall area
4.16
Operating forces
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: 1,100 mm x 2,300 mm
Test report 201 35238/2
ift Rosenheim 2
Extrapolation for -100% of overall area of test specimen
4.17
Mechanical strength
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: 1,100 mm x 2,300 mm
Test report 201 35238/3
ift Rosenheim 3
Extrapolation for -100% of overall area of test specimen
4.18
Ventilation
- - npd Same design and size of ventilation device
4.19
Bullet resistance
- - npd
Until relevant stan-dards and/or guide-lines are in place, un-determined conditions shall be agreed on by the manufacturer and the testing laboratory.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 28 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.20
Explosion resistance
- - npd
Until relevant stan-dards and/or guide-lines are in place, un-determined conditions shall be agreed on by the manufacturer and the testing laboratory.
4.21
Resistance to repeated
opening and closing
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: 1,100 mm x 2,300 mm
Test report 201 35238/3
ift Rosenheim 5
Extrapolation for -100% of overall area of test specimen
4.22
Behaviour between
different climates
- - npd Test specimen: 1.23 m X 2.18 m
Expert statement 255 36163
ift Rosenheim
WK2
4.23
Burglar resistance(3)
as per expert statements (GAS) and individual evidence/reports
Expert statement 255 41995
ift Rosenheim
WK3
See ENV 1627
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 29 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
2.4 Product family 4:
This brief description lists the significant system features of product family 4. For details of the purpose-designed versions refer to the respective test reports.
Variants Double-leaf external pedestrian doorset, o pening outwards, with/without side panel, with/without fanlight
Frame material aluminium, white
Profile depth 70 mm
Frame joints frame member: mitred to corner connector, nailed and bonded leaf/casement member: mitred/butt-jointed to corner connector / T-cleat, nailed and bonded
Rebate design single rebate
Floor joint 1 Item No.: 224203 res. 171230, threshold, SCHÜCO
Threshold seal Item No.: 227149, butt-jointed supplier: SCHÜCO
Floor joint 2 Item No.: 224203 res. 171230, threshold, SCHÜCO
Threshold seal Item No.: 244654, butt-jointed supplier: SCHÜCO
Seals/gaskets
Frame member seal Item No.: 224683, on three sides, EPDM, cut to mitre and bonded supplier: SCHÜCO
Leaf/casement member seal Item No.: 224683, on four sides, EPDM, cut to mitre and bonded supplier: SCHÜCO
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 30 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Hardware Variant 1
Lock Item No.: 241256 / 241257, tubular frame lock, supplier: SCHÜCO
Main strike plate Item No.: 239355, flat strike plate supplier: SCHÜCO
Hinge Item No.: 239013, surface-mounted door hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239052, surface-mounted door hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239584, butt hinge, three-part, 2 pcs. supplier: SCHÜCO Item No.: 239663, butt hinge, three-part, 2 pcs supplier: SCHÜCO
Hardware Variant 2
Lock of active leaf Item No.: 241255, tubular frame lock supplier: SCHÜCO
Lock of inactive leaf Item No.: 209600, shoot bolt with Item No.: 239353, espagnolette bolt supplier: SCHÜCO
Further hardware variants as specified in the lock and strikers list dated 21.12.2010, re-tained at the ift Rosenheim, including the followin g design variants:
- Latch and bolt lock
Antipanic latch and bolt lock
Antipanic set
- 2-point hook-bolt lock
- 2-point hook-bolt and bolt lock
Antipanic 2-point hook-bolt and bolt lock
- 5-point latch and bolt lock ”SafeMatic“
Antipanic 4-point latch and bolt lock ”SafeMatic“
- 3-point latch and bolt lock "InterLock“
Antipanic 3-point latch and bolt lock "InterLock“
Antipanic set 3-point latch and bolt lock "InterLock“
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 31 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Infill panel Insulating glass unit (IGU), glass thickness: 24 mm
Seals/gaskets internal Item No.: 224378, lip seal, EPDM supplier: SCHÜCO Item No.: 224350, lip seal, EPDM supplier: SCHÜCO
Seals/gaskets external Item No.: 224063, lip seal, EPDM supplier: SCHÜCO Item No.: 224350, lip seal, EPDM supplier: SCHÜCO Item No.: 224259, lip seal, EPDM supplier: SCHÜCO
Depending on glazing thickness and subject to ident ical material properties/ character-
istics and geometries, glass seals/gaskets of diffe rent thicknesses can be used as
tested. Glazing table as of 21.12.2010 is retained at the ift Rosenheim.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 32 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
2.4.1 Overview of performance characteristics of pr oduct family 4
Types of opening: Side-hung/hinged, double pedestrian doorset, opening outwards, with/without side panel, with/without fanlight
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset: flush-fitted Overall frame dimensions: 2,298 mm x 2,357 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C1 / C2*
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 2,858 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C1* 4.2
Resistance to wind load(1)
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 2,328 mm x 2,820 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
C1 / C2
Extrapolation for –100 % of frame width and frame height of test specimen
4.3
Resistance to snow and
permanent load
- - Not applicable
-
4.4
Reaction to fire
- - Not
applicable -
4.5
Watertightness
Side-hung/hinged pedestrian doorset: Overall frame dimensions: 2,298 mm x 2,357 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
3A
Extrapolation for -100% to +50% of overall area of test specimen
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 33 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 2,328 mm x 2,820 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
3A
4.6
Dangerous substances
see Section 3.6 - country specific -
4.7
Impact resistance
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: 1,100 mm x 2,300 mm
Test report 201 35238/3
ift Rosenheim 1
> overall area of test specimen (infill panel)
4.8
Load-bearing capacity of
safety devices
- - Not
applicable - 100 % of test specimen overall area
4.9
Height and width
- - order
related -
4.10
Ability to release
Side-hung/hinged pedestrian doorset: Overall casement dimensions: min. 800 mm up to max. 1,400 mm x 3,000 mm / each leaf max. leaf weight 200 kg
Test report 10-001953-
PB01-C01-03-de-01
ift Rosenheim
Requirement fulfilled
-
4.11
Acoustic performance(2)
- - npd
Seal on four sides: extrapolation for -100% to +50% of test specimen overall area Seal on three sides: extrapolation for -100% of test speci-men overall area
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 34 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.12
Thermal trans-mittance
Thermal break metal profiles from a door sys-tem, profile combination: frame – leaf/casement - threshold: Frame member: 372210 Uf = 2.0 W/(m2.K)
Frame member: 372220 Leaf/casement member: 372310 Uf = 1.8 W/(m2.K)
Frame member: 372200 Leaf/casement member: 372310 Uf = 2.1 W/(m2.K)
Frame member: 372200 + 372270 Leaf/casement member: 372310 Uf = 1.9 W/(m2.K)
Leaf/casement member: 372310 Threshold: 224203 Uf = 1.7 W/(m2.K)
Leaf/casement member: 372310 Threshold: 128480 Uf = 3.6 W/(m2.K)
Leaf/casement member: 372310 Uf = 2.5 W/(m2.K)
Leaf/casement member: 397270 Threshold: 171230 Uf = 2.4 W/(m2.K)
Leaf/casement member: 397270 Threshold: 184840 Uf = 2.1 W/(m2.K)
Leaf/casement member: 397270 Uf = 2.3 W/(m2.K)
Test report 422 35688/2
ift Rosenheim
Evidence for purpose-
designed unit
Calculation of UD is based on EN ISO 10077-1: For calculation, the fol-lowing extrapolation rule applies: test specimen dimen-sions: 1.23 m x 2.18 m ≤ overall area 3.6 m2 test specimen: 2.00 m x 2.18 m > overall area 3.6 m2
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 35 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.13
Radiation properties
All CE mark of
glazing
Evidence for purpose-
designed unit -
Side-hung/hinged pedestrian doorset: flush-fitted Overall frame dimensions: 2,328 mm x 2,357 mm * with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
1 / 2*
Side-hung/hinged pedestrian doorset with side panel: Overall frame dimensions: 2,858 mm x 2,357 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
1 / 2* 4.14
Air permeability
Side-hung/hinged pedestrian doorset with fanlight: Overall frame dimensions: 2,328 mm x 2,820 mm *with automatic multipoint-lock
Expert statement
10-001953-GAS-C01-02-
de-01 ift Rosenheim
1 / 2*
Seal on four sides: extrapolation for -100% to +50% of test specimen overall area Seal on three sides: extrapolation for -100% of test speci-men overall area
4.16
Operating forces
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: 1,100 mm x 2,300 mm
Test report 201 35238/2
ift Rosenheim 2
Extrapolation for -100% of overall area of test specimen
4.17
Mechanical strength
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: 1,100 mm x 2,300 mm
Test report 201 35238/3
ift Rosenheim 3
Extrapolation for -100% of overall area of test specimen
4.18
Ventilation
- - npd Same design and size of ventilation device
4.19
Bullet resistance
- - npd
Until relevant stan-dards and/or guide-lines are in place, un-determined conditions shall be agreed on by the manufacturer and the testing laboratory.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 36 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Clause of product standard 14351-1 Variant/ Type / Design Evidence of
Performance Value / Class Scope/ Field of application
4.20
Explosion resistance
- - npd
Until relevant stan-dards and/or guide-lines are in place, un-determined conditions shall be agreed on by the manufacturer and the testing laboratory.
4.21
Resistance to repeated
opening and closing
Side-hung/hinged pedestrian doorset: Overall leaf dimensions: 1,100 mm x 2,300 mm
Test report 201 35238/3
ift Rosenheim 5
Extrapolation for -100% of overall area of test specimen
4.22
Behaviour between
different climates
- - npd Test specimen: 1.23 m X 2.18 m
Expert statement 255 36163
ift Rosenheim
WK2
4.23
Burglar resistance(3)
as per expert statements (GAS) and individual evidence/reports
Expert statement 255 41995
ift Rosenheim
WK3
See ENV 1627
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 37 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
3 Performance characteristics according to the prod uct standard
3.1 General
Depending on the intended use and the national mandatory requirements for windows and external pedestrian
doorsets, an initial type test shall be conducted for verification of the characteristics listed in product standard
EN 14351-1, Clause 4. As set out by the product standard, the relevant performance characteristic may be
demonstrated on the basis of tests, calculation, tabulated values or by evaluation.
The following summarizes the applicable evidence of the product family for all performance characteristics
according to Clause 4 of the product standard. Superscripts are explained in Section 5.
3.2 Resistance to wind load (see EN 14351-1, Clause 4.2)
Testing of external pedestrian doorsets shall be in accordance with EN 12211. Code letter C refers to the
maximum permissible frontal deflection being smaller than l/300, Code Letter B refers to maximum permissible
frontal deflection being smaller than l/200 in accordance with table 2 of EN 12210. The number following the
Code Letter refers to the nominal wind load of the achieved class in accordance with table 1 of EN 12210. The
deflection of fixed frame members (e.g. mullions and transoms) shall be verified by calculation or testing
(reference method). The results shall be expressed in accordance with EN 12210. The tests listed in EN 12210 referring to air
permeability and classification shall be conducted as set out by 4.14 in accordance with EN 14351-1.
3.3 Resistance to snow and permanent load (refer to EN 14351-1, Clause 4.3)
The manufacturer shall provide sufficient information on the infill to enable the determination of the load-bearing
capacity of the infill, e.g. information on the thickness and type of glass.
3.4 External fire performance (refer to EN 14351-1, Clause 4.4)
Roof windows shall be tested and classified in accordance with EN 13501-5.
3.5 Watertightness (refer to EN 14351-1, Clause 4.5)
A watertightness test shall be carried out in accordance with EN 1027. The results shall be expressed in
accordance with EN 12208.
3.6 Dangerous substances (refer to EN 14351-1, Clause 4.6)
In so far as the state of the art permits, the manufacturer shall establish those materials in the product which are
liable to emission or migration during normal intended use and for which emission or migration into the
environment is potentially dangerous to hygiene, health or the environment. Manufacturer is obliged to prepare
and supply specific information on the content in conformity with the legal requirements in the intended country
of destination.
3.7 Impact resistance (refer to EN 14351-1, Clause 4.7)
Windows and external pedestrian doorsets fitted with glass or other fragmental material shall be tested and the
results shall be expressed in accordance with EN 13049. Where relevant, the test shall be carried out from both
sides.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 38 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
3.8 Load-bearing capacity of safety devices (refer to EN 14351-1, Clause 4.8)
The threshold strength shall be demonstrated by means of tests carried out as described in EN 14609 or EN
948 (reference methods), or by calculation.
3.9 Height and width of doorsets and French windows /casement doors (refer to EN 14351-1, Clause 4.9)
The clear opening height and width of external pedestrian doorsets and French windows/casement doors (see
EN 12519:2004, 3.1) shall be expressed in mm.
3.10 Ability to release (refer to EN 14351-1, Clause 4.10)
Emergency exit devices and panic devices installed on external pedestrian doorsets in escape routes shall
comply with EN 179, EN 1125, prEN 13633 or prEN 13637.
3.11 Acoustic performance (refer to EN 14351-1, Clause 4.11)
The sound reduction index shall be determined in accordance with EN ISO 140-3 (reference method) or for
specific window types in accordance with Annex B. The test results shall be evaluated in accordance with
EN ISO 717-1.
3.12 Thermal transmittance (refer to EN 14351-1, Clause 4.12)
The thermal transmittance for windows and external pedestrian doorsets shall be determined by using:
- - EN ISO 10077-1, Table F.1
or by calculation using:
- EN ISO 10077-1 or
- EN ISO 10077-1 and EN ISO 10077-2
or by hot box method using:
- EN ISO 12567-1 or
- EN ISO 12567-2
EN ISO 12567-1 shall be used as reference method for windows and external pedestrian doorsets and
EN ISO 12567-2 as reference method for roof windows.
3.13 Radiation properties (refer to EN 14351-1, Clause 4.13)
The determination of the total solar energy transmittance (g-value) and light transmittance of translucent glazing
shall be carried out in accordance with EN 410, or if relevant, with EN 13363-1 or EN 13363-2 (reference
method).
3.14 Air permeability (refer to EN 14351-1, Clause 4.14)
One air permeability test each for negative and positive pressure shall be conducted as per EN 1026.
The test result, defined as the numerical average of the two air permeability values (m³/h) at each pressure step
shall be expressed in accordance with EN 12207, 4.6.
3.15 Durability (refer to EN 14351-1, Clause 4.15)
The manufacturer shall provide information about maintenance and the replaceable parts.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 39 of 42
No. 10-001953-SP04-C01-99-en-01 dated 09 January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
3.16 Operating forces (refer to EN 14351-1, Clause 4.16)
Manually operated windows shall be tested in accordance with EN 12046-1. The results shall be expressed in
accordance with EN 13115. Manually operated external pedestrian doorsets shall be tested in accordance with EN
12046-2. The results shall be expressed in accordance with EN 12217.
3.17 Mechanical strength (refer to EN 14351-1, Clause 4.17)
Windows shall be tested in accordance with EN 14608 and EN 14609. Prior to and after those tests manually
operated windows shall be tested in accordance with EN 12046-1. The results shall be expressed in accordance
with EN 13115.
External pedestrian doorsets shall be tested in accordance with EN 947, EN 948, EN 949 and EN 950. The
results shall be expressed in accordance with EN 1192.
3.18 Ventilation (refer to EN 14351-1, Clause 4.18)
Air transfer devices integrated in a window or external pedestrian doorset shall be tested and evaluated in
accordance with EN 13141-1, 4.1.
3.19 Bullet resistance (refer to EN 14351-1, Clause 4.19)
After testing in accordance with EN 1523 the bullet resistant characteristics of windows and external pedestrian
doorsets shall be expressed in accordance with EN 1522.
3.20 Explosion resistance (refer to EN 14351-1, Clause 4.20)
3.20.1 Shock tube
After testing in accordance with EN 13124-1 the explosion resistant characteristics of windows and external
pedestrian doorsets shall be expressed in accordance with EN 13123-1.
3.20.2 Range test
After testing in accordance with EN 13124-2 the explosion resistant characteristics of windows and external
pedestrian doorsets shall be expressed in accordance with EN 13123-2.
3.21 Resistance to repeated opening and closing (refer to EN 14351-1, Clause 4.21)
A repeated opening and closing test shall be carried out in accordance with EN 1191. The results shall be
expressed in accordance with EN 12400.
3.22 Behaviour between different climates (refer to EN 14351-1, Clause 4.22)
A climate test on external pedestrian doorsets shall be carried out in accordance with EN 1121. The results shall
be expressed in accordance with EN 12219.
3.23 Burglar resistance (refer to EN 14351-1, Clause 4.23)
After testing in accordance with ENV 1628, ENV 1629 and ENV 1630 the results shall be expressed in
accordance with ENV 1627.
3.24 Special requirements (refer to EN 14351-1, Clause 4.24)
3.24.1 Unframed glass doorsets (refer to EN 14351-1, Clause 4.24.1)
Glass in unframed glass doorsets shall comply with EN 1863-2, EN 12150-2, EN ISO 12543-2, EN 14179-2 or
EN 14321-2.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 42 of 42
No. 10-001953-SP04-C01-99-en-01 dated 9. January 2012 Client SCHÜCO International KG, 33609 Bielefeld
4 General instructions for the ift System Passport
4.1 Specified performance characteristics according to the product standard
All listed performance characteristics were tested and evaluated to the test and classifications standards contained in the product standard EN 14351-1. They are based on the evidence of performance pre-sented by the client. For detailed information refer to the respective individual evidence of perform-ance/test reports referring to the performance characteristics listed in Section 2 .
4.2 Basis of the ift system passport
• Existing certification contract concluded between the ift and the client (system sup-plier),
• Continuous audit/surveillance of client (system supplier),
• Introduced and maintained factory production control (FPC) system as set out by the standards.
The ift Rosenheim shall be notified without delay of any system changes.
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 41 of 42
No. 10-001953-SP04-C01-99-en-01 dated 9. January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
5 Special instructions for use
The special instructions for use listed in the following are rules for applying the different performance characteristics specified by the standard. They are based on the normative provisions and the experience of the ift Rosenheim.
As set out by the product standard the manufacturer is responsible for ensuring conformity to the declared characteristics. Durability of the door system was not object of testing/inspection. It shall be ensured for the specified service life of the product by using appropriate state of the art materials and finishes, to maintain the performance characteristics.
The overview given in this product passport is based on the evidence provided. No legal claim can be derived from this.
This system passport forms the basis for issuing the ift Certificate of Conformity, which documents the conformity of the finished products and the factory quality/production control through regular third-party audits of the manufacturers conducted by the ift Rosenheim.
The identified characteristics (classifications) are applicable to external pedestrian doorsets and composed elements for installation in vertical structural openings covered by the scope of application of EN 14351-1. Application is subject to the relevant national rules and regulations.
As set out by the Regulation (EC) No. 842/2006 of the European Parliament and of the Council of 17 May 2006 on certain fluorinated greenhouse gases, insulating glass units filled with Argon / SF6 are not allowed to be placed on the market as of 4 July 2007 or 04 July 2008, respectively.
The rules for the interchangeability of door hardware are defined in the ift Certification Scheme for Hardware (QM328) and the ift Certification Scheme for Hinges (QM343).
ift- System Passport : External pedestrian doorset as per EN 14351-1 Page 42 of 42
No. 10-001953-SP04-C01-99-en-01 dated 9. January 2012 Client SCHÜCO International KG, 33609 Bielefeld
Superscripts, see Section 5
\\sift
01\if
tello
_dat
en_r
w\A
blag
e\V
O10
0019
53\P
roje
kt\P
R11
\Prü
fber
icht
e\10
-001
953-
PR
11 C
01-9
9-en
-01_
PB
12.d
oc
08-0
3 / 7
19
Super-scripts
(1) The structural properties of thermal break profiles must be taken into account. Mullion and transom profile sections must be dimensioned adequately on the basis of structural engi-neering.
(2) Acoustic performance: application to tested designs
(3) BURGLAR RESISTANCE: Minimum requirements for glazing: resistance class 2 as per EN 356 class P4A resistance class 3 as per EN 356 class P5A Glazing method (glass and/or infill panel retention) as per referenced evidence Type, position, number and fixing of burglar resistant locking points, see referenced evi-dence. Installation of burglar-resistant windows as per installation manual from SCHÜCO Interna-tional KG approved by the ift For further design variants see referenced evidence/test reports.
ift Rosenheim