table of contents - central european trading kft.• programmable monitoring at 200 mv, 100 mv and...

Web Site: DescoEMIT.com • Phone (909) 664-9980 • Fax (909) 627-7449

See our products beingMade in Americaon our web site:

DescoIndustries.com/Factory2

New ProductsIntroduction – Control and Monitor Your ESD Progress

IonizersBenchtop Ionizers

Overhead Ionizers

Compressed Air Ionizers

Benchtop Ionization ArticleBenchtop Zero Volt & Mini Zero Volt IonizerBenchtop Blower Ionizer & Chargebuster Jr. Ionizer

Overhead Ionization ArticleOverhead Zero Volt IonizerCritical Environment Ionizer & Chargebuster Overhead Ionizer

Compressed Air Ionization ArticleChargebuster Ion GunIon Python & Portable Ionizing Air Gun

Room Ionization

Room Ionization Article

Pulsed Ion Bars & Ionization Bars

TestersData Acquisition

Data Acquisition ArticleSolid State Smartlog X3Smartlog X3 & TEAM Basic Software

Personnel GroundingPersonnel Grounding ArticleDual Independent Footwear/Footwear and Wrist Strap Tester

Test and MeasurementTest and Measurement Article

Surface Resistance Test Kit & Charged Plate Analyzer

Digital Static Field Meter and Ionization Test Kit & Static Locator

Continuous MonitorsSingle Conductor Continuous Monitors

Single Wire Impedence Monitoring Article

Jewel Workstation Continuous Monitor & Full Time Continuous Monitor & Calibration Unit

Dual ConductorDual Wire Resistance Continuous Monitoring Article

Dual Wire, Dual Operator Continuous Monitor

Ultra Low Voltage Monitor

Zero Volt Monitor

Dual Operator Continuous Monitor & Multi-Mount Continous Monitor

Multi-Ground Continuous Monitor

3

5

151617

181920

21

222324

25

272829

3031

7

89

10

11121314

PagesTab

le O

f Co

nte

nts

IRIS Room Ionization System

26

Laminar Flow Bench

32

3334

Limited Warranty 35

http://www.descoemit.com/http://www.descoindustries.com/factories



DescoIndustries.com/Factory 3

Tools for ESD Monitoring, Ionization & TestManagers responsible for ESD control programs at leading companies use continuous monitors, ionization, and test equipment with computer data acquisition capabilities. Knowledge of ongoing proper grounding, ionization offset voltages, and test results lead to improvement in product yields and reliability.

ESD Control is becoming increasingly important as devices become more ESD sensitive. The drive for miniaturization has reduced the width of electronic device structures to as small as 0.10 micrometer (equal to 0.0001 millimeter or 0.000004 inch). Increasingly, charged device model (CDM) failures occur and need to be combated.

Manufacturers are under intense pressure to improve their productivity, quality, and reliability. Major companies state that 25% of all unidentified failure to electronic assemblies and products are the result of ElectroStatic Discharge (ESD). EMIT products can provide solutions and pay for themselves by improving quality, productivity, and reducing warranty costs.

EMIT products that address these critical issues, include:

• Continuous Monitors• Ionizers

Continuous MonitorsVerify operator and worksurface grounding at all times. “Typical test programs recommend that wrist straps that are used daily should be testeddaily. However, if the products that are being produced are of such value that knowledge of a continuous, reliable ground is needed, and then continuous monitoring should be considered or even required.” (Ref: ESD TR20.20)

IonizersBalanced ionizers neutralize charges; out-of-balance ionizers charge ungrounded items. Ionization or other charge mitigating techniques shall be used at the workstation to neutralize electrostatic fields on all process essential insulators, non-conductors which cannot be grounded. (Ref: ANSI/ESD S20.20)

“The primary method of static charge control is direct connection to ground for conductors, static dissipative materials, and personnel. A complete static control program must also deal with isolated conductors that cannot be grounded, insulating materials (e.g., most common plastics), and moving personnel who cannot use wrist or heel straps or ESD control flooring and footwear.” (Ref: ESD TR20.20)

Intro

du

ction

• Test Equipment• Data Acquisition

http://www.descoemit.com/http://www.descoindustries.com/factories




Test EquipmentPersonnel grounding devices, wrist straps and ESD footwear, should be testedand the results logged. ESD protective products (worksurface, floor, garments, ionizers, packaging, and accessories) should have their properties periodically checked Compliance Verification ESD TR53 as required by ANSI/ESD S20.20.

“A Compliance Verification Plan shall be established to ensure the organization’s compliance with the requirements of the Plan. Test equipment shall be selected to make measurements of appropriate properties of the technical requirements that are incorporated into the ESD program plan.” (Ref: ANSI/ESD S20.20)

Data AcquisitionProcess monitoring (measurements) shall be conducted in accordance with a Compliance Verification Plan that identifies the technical requirements to be verified, the measurement limits and the frequency at which those verifications shall occur. The Compliance Verification Plan shall document the test methods and equipment used for process monitoring and measurements. … Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements. The test equipment selected shall be capable of making the measurements defined in the Compliance Verification Plan.” [ANSI/ESD S20.20]

Record and manage meaningful information as part of your compliance verification plan (Ref: ANSI/ESD S20.20). EMIT product capabilities include:

• Logging test results of personnel grounding devices• Continuous Monitor status of grounding integrity• Measure and adjust Ionizer balance (offset voltage) via computer

Leading companies find EMIT enhanced ESD control management tools are cost effective, as ESD sensitive products can pass all inspections and still experience ESD damage. ESD damage to electronic components can take the form of catastrophic failures or latent defects with latent defects being by far the most costly:

1) Catastrophic Failures - inspection is able to detect2) Latent Defect - component damage but inspection passes as good

Manufactured in AmericaDeal with the manufacturer who backs up EMIT products with superior warranties. Desco Industries, Inc. has been in business for over thirty years and has the financial strength for its warranties to be meaningful. Most products have 5 year limited warranties. EMIT stands behind its products.

See EMIT products being manufactured at our Chino, California facility; go to DescoIndustries.com/Factory

Intro

du

ction

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoindustries.com/factories/




50645 / 50644• Point-of-use compressed air ionizer

• Neutralize electrostatic charges to eliminate electrostatic attraction,

visual imperfections, and contamination issues by dislodging charged

dust and debris

• Fast < 1 second discharger times tested per ANSI/ESD S3.1

Offset Voltage (balance) < +/- 30 volts exceeding limit of ANSI/ESD

S20.20

• Modular design with 7 foot ESD protective hose with trigger switch

• 50645 - 120V / 50644 - 220V

• 1-year limited warranty

Download our Technical Bulletin - TB-6559

New

Pro

du

cts

50580• Steady state DC dual polarity signal, leaving virtually zero voltage

on the operator

• Programmable monitoring at 200 mV, 100 mV and 50 mV

• One of the lowest test voltages in the industry - 50 mV; exceeds

most dual-wire monitoring technology

• Designed for the most critical applications such as disk drive

manufacturing and semiconductor fabrication

• Made in America

• 5-Year Limited Warranty


50545

50580

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/ChargebusterIonGun/50645/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/ChargebusterIonGun/50644/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/ChargebusterIonGun/50645/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/ChargebusterIonGun/50644/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6559.pdhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ULVM/50580/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6556.pd




50570• Continuously monitors 8 ground connections and 1 ground hub

• Each ground channel can be set to 1 ohm, 1 megohm, 10

megohms, and 35 megohms resistance limits

• Ground reference connection

• Self calibration and self diagnostic modes for

improved efficiency

• Enclosed in stainless steel for better durability and cleanliness


• Made in America


50563 / 50564• Everything needed to conduct an ESD control program survey

• Kit includes all the tools required to survey to fulfill your

ANSI/ESD S20.20 compliance verification plan

• Contents:

(1) 50598 Ionization test kit (includes digital static field meter)

(1) 50553 HBM test fixture

(1) 50557 surface resistance test kit

(1) 50560 resistance attachment

(1) Fluke 114-A Meter

(1) Desco 98130 AC outlet analyzer and wrist strap tester, 120VAC US

(1) Desco 09100 Jewel® wrist strap

(2) Desco 07590 foot grounders

(1 set) Training paddles

(1) Heavy duty carrying case

• 50563 - 120V / 50564 - 220V


• Made in America

New

Pro

du

cts

50570

50563

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousEquipment/50570/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6551.pdhttp://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ESDSurveyKit/50563/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ESDSurveyKit/50564/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50598/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50553/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/SurfaceResistanceTestKit/50557/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/SurfaceResistanceTestKit/50560/http://www.desco.com/DescoCatalog/TestingMeasurementEquipment/PersonnelTesters/ACOutletWristStrap/98130/http://www.desco.com/DescoCatalog/PersonnelGrounding/WristStrapsCoilCords/SingleWireWristStraps/JewelElasticAdjustable/09100/http://www.desco.com/DescoCatalog/PersonnelGrounding/FootGrounders/PremiumHeel/07590/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ESDSurveyKit/50563/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ESDSurveyKit/50564/http://www.descoemit.com/Warranty.aspx

7Web Site: DescoEMIT.com • Phone (909) 664-9980 • Fax (909) 627-7449See our products being

Made in Americaon our web site:

DescoIndustries.com/Factory

Mo

nito

rs

Advantages of Continuous Monitoring Over Periodic Testing

• Provides knowledge of a continuous, reliable ground

• Eliminates wrist strap daily testing and logging

• Intermittent strain relief failures first detected when cord is under stress

• Periodic testing failure makes prior shift’s entire production suspect

Click Here To Read More

Single-Wave Distortion Impedance Continuous Monitors

• Provides true 100% continuous monitoring

• Continuous < 2 volt signal for constant sensing phase difference between current and voltage

• Any standard wrist strap can be used - more durable and less expensive

• Typically no user adjustment needed

• Also alarms there is when excessive voltage on operator

• There have not been any reported skin irritation problems

Advantages of Continuous Monitoring Over Periodic Testing

Continuous Monitors pay for themselves, improving quality, productivity, and eliminating wrist strap daily testing and test result logging. “The wrist strap system should be tested daily to ensure proper electrical value. Daily testing may be omitted if constant monitoring is used.” (ANSI/ESD S1.1 Annex A, 3 Frequency of Functional Testing)

Companies manufacturing products containing ESD sensitive items need to ask themselves “how important is the reliability of their products”? “If the products that are being produced are of such value that knowledge of a continuous, reliable ground is needed, and then continuous monitoring should be considered or even required.”

50514 full time continuous monitor

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/SingleWireContinuousMonitoring.pdf

8 Web Site: DescoEMIT.com • Phone (909) 664-9980 • Fax (909) 627-7449See our products being



Mo

nito

rs

• Monitors one operator and one ESD worksurface

• Can use with any brand single-wire wrist strap

• Ongoing ground monitoring of ESD protective workstation

• Stand-by parking snap


• Made in America


50502 - Mini Jewel workstation monitor, 120VAC with Jewel Wrist strap

50503 - Mini Jewel workstation monitor, 220VAC with Jewel Wrist strap

50499 - Continuous monitor AC adapter, 120VAC

• Alarm signal status; used to connect to light tower; allows

additional workstaion status above workenviorment

• IEC replaceable; allows easy cord installation and replacement


• Made in America Download our Technical Bulletin - TB-6550

50514 - Full time monitor, 120 VAC

50519 - Full time monitor, 220 VAC

Click item numbers above for full product details

50545

50502

50514

• Used to calibrate Multi-Mount Continuous Monitor, Full

Time Continuous Monitor, Dual Operator Continuous

Monitor, Jewel® Workstation Continuous Mini Monitor


• Made in America

50512 - Calibration Unit

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6509.pdhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/JewelWorkstationContinuousMiniMonitor/50502/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/JewelWorkstationContinuousMiniMonitor/50503/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/JewelWorkstationContinuousMiniMonitor/50499/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6550.pdfhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/FullTimeContinuousMonitor/50514/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/FullTimeContinuousMonitor/50519/http://www.descoemit.com/Warranty.aspxhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/MonitorCalibrationUnit/50512/




Mo

nito

rs

• Control unit LEDs indicate proper grounding of two mats and two operators; includes mounting

• Allows mounting control unit at eye level, not using any work surface area; illuminated LEDs

continuously display grounding status


• Made in America


50516 - Dual operator continuous monitor, 120 V, with 2 Jewel wrist straps

50517 - Dual operator continuous monitor, 220 V, with 2 Jewel wrist straps

50518 - Satellite replacement for dual monitor

50499 - Continuous monitor AC adapter, 120VAC

• Designed to mount on equipment

• Monitors operator and work surface

• Work surface monitoring may be disabled, providing user with more flexibility


• Made in America


50390 - Multi-mount continuous monitor, auto-jack, 120V

50391 - Multi-mount continuous monitor, auto-jack, 220V


50516

50390


http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/pdf/TB-6549.pdfhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/DualOperatorContinuousMonitorTwoSatelliteModules/50516/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/DualOperatorContinuousMonitorTwoSatelliteModules/50517/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/DualOperatorContinuousMonitorTwoSatelliteModules/50518/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/DualOperatorContinuousMonitorTwoSatelliteModules/50499/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6551.pdfhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/MultiMountMonitor/50390/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousSingleConductor/MultiMountMonitor/50391/




Mo

nito

rs

Dual-Wire Resistance Continuous Monitors

• Open circuits cause alarms

• Steady state DC signal - not pulsed

• Durable: over 11,000,000 flex test per S1.1 vs

200,000 from our competition

• Dual polarity signal and near zero voltage on operator

• Programmer allows adjustments in seconds

What’s Better: Single-Wire or Dual-Wire

Continuous Monitors?

• Both are sound and reliable technologies

• Leading companies have used both for many years to improve quality and productivity

• User preference is the deciding element

• All EMIT continuous monitors use steady state signals, not pulsed signals


Dual-Wire Resistance Continuous Monitors

From ESD TR 12-01 “This type of monitor is used with a two wire (dual) wrist strap. When a person is wearing a wrist strap, the monitor observes the resistance of the loop, consisting of a wire, a person, a wristband, and a second wire. If any part of the loop should open (become disconnected or have out of limit resistance), the circuit will go into the alarm state.”

“There are two types of signals used by resistance based constant monitors; steady state DC and pulsed DC. Pulsed DC signals were developed because of concerns about skin irritation. However, pulse DC units introduce periods of off time (seconds) when the system is not

being monitored.”

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/DualWireResistanceContinuousMonitoring.pdf




Mo

nito

rs

• Dual wire continuous monitors provide redundancy; even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with the other wire.

• Most advanced means of monitoring the ground path for operators, workstations, and equipment

• Equal opposite polarity voltage signals bring operator to zero volts to ground

• Adjustable audible alarm level • For use with dual-wire wrist straps• 5-year limited warranty• Made in America


50524

50535

50480

50528 - Zero volt monitor, 120V with 2 Desco 19690 wrist straps

50537 - Zero volt monitor, Euro, no adapter with 2 Desco 19690 wrist straps

50575 - Zero volt monitor, 220V, UK plug, with 2 Desco 19690 wrist straps

50538 - Zero volt monitor, 120V with 2 Desco 09163 wrist straps

50529 - 2-Piece remote assembly with black wire, for ZVM

50531 - 2-Piece remote assembly with grey wire, for ZVM

50530 - 10 Ft. black remote connecting wire, for ZVM

50532 - 10 Ft. gray remote connecting wire, for ZVM

50533 - Socket enclosure, remote module for ZVM

50534 - Mat snap kit, For ZVM

50535 - Operator resistance programmer, for ZVM

50524 - Limit comparator, for ZVM

50480 - Power supply, 120V, for dual wire monitors


50522

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6515.pdfhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50528/http://www.desco.com/DescoCatalog/PersonnelGrounding/WristStrapsCoilCords/DualWireWristStraps/DualAdjustableElastic/19690/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50537/http://www.desco.com/DescoCatalog/PersonnelGrounding/WristStrapsCoilCords/DualWireWristStraps/DualAdjustableElastic/19690/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50575/http://www.desco.com/DescoCatalog/PersonnelGrounding/WristStrapsCoilCords/DualWireWristStraps/DualAdjustableElastic/19690/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50538/http://www.desco.com/DescoCatalog/PersonnelGrounding/WristStrapsCoilCords/DualWireWristStraps/JewelElasticAdjustable/09163/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50529/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50531/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50530/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50532/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50533/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50534/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50535/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50524/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ZeroVoltMonitor/50480/




Mo

nito

rs

• Dual wire continuous monitors provide redundancy; even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with the other wire • Patented resistance loop monitoring technology • Monitoring of two operators and two ground connections independently • For use with dual-wire wrist straps• Adjustable alarm level • 5-year limited warranty • Made in America


50524

50526

50480

50522 - Dual operator programmable monitor with 2 wrist straps

50515 - Dual operator programmable monitor with 2 wrist straps, No Adapter

50565 - Dual operator programmable monitor with 2 wrist straps, UK Plug

50524 - Limit comparator for dual wire monitors

50526 - Replacement gray remote

50525 - Replacement black remote

50541 - Universal remote for zero volt monitor

50542 - Universal remote for dual wire monitor


50522

50542

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6514.pdfhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/DualOperatorProgrammableResistiveLoopWorkstation/50522/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/DualOperatorProgrammableResistiveLoopWorkstation/50515/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/DualOperatorProgrammableResistiveLoopWorkstation/50565/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/DualOperatorProgrammableResistiveLoopWorkstation/50524/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/DualOperatorProgrammableResistiveLoopWorkstation/50526/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/DualOperatorProgrammableResistiveLoopWorkstation/50525/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/UniversalRemotes/50541/http://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/UniversalRemotes/50542/




Mo

nito

rs

• Steady state DC dual polarity signal, leaving virtually zero voltage on the operator • Programmable monitoring at 200 mV, 100 mV and 50 mV • One of the lowest test voltages in the industry - 50 mV; exceeds most dual-wire monitoring technology • Designed for the most critical applications such as disk drive manufacturing and semiconductor fabrication • Provides continuous ground monitoring of two operators, two supervisors, two workstations and two tool grounded stations • Features two charge detection indicators that monitor voltage on the operators’ circuits • Dual wire continuous monitors provide redundancy; even if one dual wire wrist strap conductor is severed, operator has reliable path-to- ground with the other wire • Most advanced means of monitoring the ground path for operators, work stations, and equipment • Operating voltage: 100-240 VAC • Operator remotes are enclosed in stainless steel for better durability and cleanliness


50580 - Ultra Low Voltage Monitor


50580

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://documents.descoemit.com/pdf/TB-6556.pdfhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousDualConductor/ULVM/50580/




Mo

nito

rs

• Continuously monitors 8 ground connections and 1 ground hub

• Each ground channel can be set to 1 ohm, 1 megohm, 10

megohms, and 35 megohms resistance limits

• Ground reference connection

• Self calibration and self diagnostic modes for improved efficiency

• Enclosed in stainless steel for better durability and cleanliness

• Mounting tabs allow you to mount the monitor underneath a bench top

• Includes 1 Multi-Ground Hub which has six banana jacks and six 10-32

screws with split washer


• Made in America


50570 - Multi-ground continuous monitor


1 - Bench laminate surface2 - Work mat on bench3 - Work mat on bench4 - Floor mat

LightFixture*Optional

Power Supply

Worksurface, Tool, Cart, Accessory

Programmable LogicController

Multi-Ground Hub

*Optional

1 2 3 1 2 3

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6557.pdfhttp://www.descoemit.com/DescoEmitCatalog/Monitors/ContinuousEquipment/50570/




Ion

izatio

n

Why Ionization?• Insulators and isolated conductors cannot be grounded

• Ionization is a component of a complete static control program

• Circuit board materials are examples of necessary insulators

• Combat field induced discharge even when ESDS is properly grounded

Benchtop Ionizers• AC ionizer emitter pins switch rapidly between positive and negative high voltage

• AC ionizer requires sufficient fan air flow

• Steady State DC ionizer uses pairs of emitters for either negative and positive high voltage

• DC ionizer can operate at lower airflow

• Can be a concern for operator comfort or when handling small component parts

Why Ionization?Grounding is very effective in removing electrostatic charges; all conductors including people should be grounded in an ESD protected area. Grounding everything would be great but if insulators are present or conductors are isolated, by definition, grounding cannot occur. “The primary method of static charge control is direct connection to ground for conductors, static dissipative materials, and personnel. A complete static control program must also deal with isolated conductors that cannot be grounded, insulating materials (e.g., most common plastics),

and moving personnel who cannot use wrist or heel straps or ESD control flooring and footwear.


50663 Zero Volt Ionizer

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/BenchtopIonizers.pdf




Ion

izatio

n

• The best balancing ionizer available • Offset voltage controlled to ±3 Volts typical• Features steady state DC ionization and EMIT’s patented (US Patent #4,974,115) Sense Feedback balancing • Made in America • 5-year limited warranty


50663

50663 - Benchtop zero volt ionizer, 120 VAC

50670 - Benchtop zero volt ionizer, 220 VAC

50690 - Benchtop zero volt ionizer, 115 V, US plug

50667 - Alarm threshold programmer

50658 - Tip cleaner, emitter point, 20 Pack

50659 - Tip cleaner, emitter point, 100 Pack


• Ultra compact size - 5.25”H x 3.5”W x 1.7”D • Low offset voltage with feedback alarms • Two fan speeds, high and low • Rapid access maintenance• Made in America • 5-year limited warranty


50640 - Benchtop mini zero volt ionizer, 120 VAC

50661 - Benchtop zero volt ionizer, no adapter

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6533.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ZeroVoltIonizer/50663/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ZeroVoltIonizer/50670/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ZeroVoltIonizer/50690/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ZeroVoltIonizer/50667/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ZeroVoltIonizer/50658/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ZeroVoltIonizer/50659/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6532.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/MiniIonizer/50640/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/MiniIonizer/50661/




Ion

izatio

n

50600 - Ionizer, benchtop blower, 120 VAC NIST

• Adjustable High Volume Output Air Flow To 117 CFM Maximum

• Auto-Balanced AC Ionizing System with Less Than 2 Seconds

Discharge Time at 12 inches

• Gold Plated Emitters

• Multi-Mount Stand

• Made in America



• Compact auto-balanced 60-77 CFM

adjustable output air flow

• Patented emitter replacement cassettes

and removable back grill

• Made in America




50611 - Ionizer with Cassette 120VAC NIST

50612 - Ionizer with Cassette & Heater 120VAC NIST

50605 - Ionizer Junior Arm

50617 - Emitter Cassette Replacement

50618 - CE Ionizer Emitter Pin, Pack of 20 50605 50617

50600

50611

50663


http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/BenchTopIonizer/50600/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6525.pdfhttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6524.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ChargebusterJrHighOutput/50611/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ChargebusterJrHighOutput/50612/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ChargebusterJrHighOutput/50605/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ChargebusterJrHighOutput/50617/http://www.descoemit.com/DescoEmitCatalog/Ionization/BenchTopIonizers/ChargebusterJrHighOutput/50618/




Ion

izatio

n

Overhead Ionization• Can use remote control to adjust offset voltage balance, change fan speeds and alarm settings

• Or use overhead zero volt ionizer control buttons

• Per S20.20, overhead ionizer offset voltage balance < ± 50 volts

• EMIT overhead zero volt ionizer has Auto-Balancing Sense Feedback typically; ±5 volts

• Discharge times tested at 3.1 seconds (18” under fans)

• Discharge times per S20.20 are user defined

• Data acquisition allows recording levels of performance to a computer at all times

Ion Offset Voltage (Balance) Feedback Sensors• Designed to provide balanced amount of positive and negative ions

• Ion sensors usually incorporated into a grill of the ionizer’s outlet

• Designed to sense and correct air ion imbalances

• In critical applications, monitoring, feedback control, and alarms may be required

• All emitters pins require periodic cleaning; “clean me alarms” can extend maintenance / calibration cycle


50665 Overhead Zero Volt Ionizer

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/OverheadIonizers.pdf




Ion

izatio

n

• Best overhead ionizer now available from EMIT • Low balance (offset voltage) • Balance ±3 volts, typically; ±5 volts maximum controlled via EMIT patented auto-balancing sense feedback • Fast discharge times• Data acquisition


50665

50669 50658 50659

50664 - Overhead Zero Volt Ionizer with 2 Fans, 120V

50665 - Overhead Zero Volt Ionizer with 3-Fans, 120 V

50671 - Overhead Zero Volt Ionizer with 2 Fans, 220V, No power Cord

50672 - Overhead Zero Volt Ionizer with 3 Fans, 220V, No power Cord

50669 - Infared Remote Control for Ionizers

50658 - Tip Cleaner, Emitter Point, 20 Pack

50659 - Tip Cleaner, Emitter Point, 100 Pack


• CSA approved• Low ozone emissions – tests well below the OSHA limit of 0.05 ppm ozone• Calibration• Overhead installation with two (50664 and 50671) or three (50665 and 50672) 9-speed fans • Up to 124 units can be daisy-chained into one serial port • Made in America • 5-year limited warranty

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://documents.descoemit.com/PDF/TB-6534.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50664/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50665/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50671/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/InfraredRemoteControl/50672/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/InfraredRemoteControl/50669/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50658/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50659/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50664/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50671/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50665/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50672/http://www.descoemit.com/Warranty.aspx




Ion

izatio

n

• Multiple high output fans (24” with 2 fans,

48” with 3 fans)

• Overhead mounting

• Closed-loop feedback electronic balance system

• Made in America




50606 - Overhead ionizer, 24 in. 120VAC NIST




50617 - Emitter cassette replacement

50610 - Auto calibration unit

50610

50617

• Shrouded 3 blade fan design with steady

state DC ionization

• Auto-feedback system (audible and visual

alarm through single tri-color LED)

• 120/220 VAC input voltage selectable

• 3 Position fan speed: low, medium, high

50680 - Chargebuster overhead ionizer with 3 Fans, 120V

50681 - Chargebuster overhead zero volt ionizer with 3 fans, 220V*

50658 - Tip cleaner, emitter point, 20 pack

50659 - Tip cleaner, emitter point, 100 pack

50545 - Black AC power cord, 220V Euro

50546 - Black AC power cord, 220V UK

50545 *Power cord sold seperately

• Made in America



50606

50680

50659

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6529.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/CriticalEnvironmentOverheadIonizer/50606/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/CriticalEnvironmentOverheadIonizer/50608/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/CriticalEnvironmentOverheadIonizer/50607/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/CriticalEnvironmentOverheadIonizer/50609/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/CriticalEnvironmentOverheadIonizer/50617/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/CriticalEnvironmentOverheadIonizer/50610/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/ChargebusterOverheadIonizers/50680/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/ChargebusterOverheadIonizers/50681/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/ChargebusterOverheadIonizers/50658/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/ChargebusterOverheadIonizers/50659/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50545/http://www.descoemit.com/DescoEmitCatalog/Ionization/OverheadIonizers/OverheadZeroVoltIonizer/50546/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6545.pdf




Ion

izatio

n

• Compact, fully self-contained unit

• User selectable operating frequency

• User selectable duty cycle

• 24 volt DC power input

• Four button control with LED readout


50630 - 12 in. 220 VAC

50631 - 24 in. 220 VAC

50632 - 48 in. 220 VAC

50633 - 72 in. 220 VAC

50654 - 12 in. 120 VAC

50655 - 24 in. 120 VAC

50656 - 48 in. 120 VAC

50657 - 72 in. 120 VAC

50669 - Remote Control

50658 - Tip Cleaner Emitter Point, Pack of 20

50668 - Emitter Point, Pack of 8

• Process ion bar technology

• Cost-effective alternative to overhead ionization

• Reduces particulate contamination

• Rapid neutralization over a localized area


Ion Bars

50900 - 12 in. , 4 Emitters

50901 - 24 in. , 6 Emitters

50902 - 36 in. , 8 Emitters

50903 - 48 in. , 12 Emitters

50904 - 60 in. , 14 Emitters

50905 - 72 in. , 18 Emitters

50906 - 96 in. , 24 Emitters


• Made in America


50658 50659 50669

• Made in America


Air Assisted Ion Bars

50920 - 12 in. , 4 Emitters

50921 - 24 in. , 8 Emitters

50922 - 36 in. , 12 Emitters

50923 - 48 in. , 16 Emitters

50924 - 60 in. , 20 Emitters

50925 - 72 in. , 24 Emitters

50926 - 96 in. , 32 Emitters

50940 - External Controller, 120 VAC

50945 - Recessed Controller, 120 VAC

50941 - External Controller, 220 VAC

50946 - Recessed Controller, 220 VAC

50950 - Connector Set, Ion Bar 2 - 1, Pack of 2

50951 - Emitter for Air Assisted Ion Bar

50952 - Emitter for Non-Air Assisted Ion Bar

50953 - Filter Regulator for Air Assisted Ion Bar withHose

50654

50901

50940


http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://documents.descoemit.com/PDF/TB-6536.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50630/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50631/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50632/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50633/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50654/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50655/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50656/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50657/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50669/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50658/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/PulsedIonizingBar/50668/http://documents.descoemit.com/PDF/TB-6562.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50900/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50901/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50902/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50903/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50904/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50905/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50906/http://www.descoemit.com/Warranty.aspxhttp://www.descoemit.com/Warranty.aspxhttp://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50920/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50921/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50922/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50923/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50924/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50925/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50926/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50940/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50945/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50941/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50946/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50950/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50951/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50952/http://www.descoemit.com/DescoEmitCatalog/Ionization/LaminarFlowBench/IonizationBars/50953/




Ion

izatio

n

Overhead Ionization• Compressed gas ionizer

• Deals effectively with ElectroStatic Attraction (ESA)

• Controls charged particle contamination and visual imperfections

• Most blow-off guns use compressed air or nitrogen

Benefits of Ionizers• Studies show ionizers improve quality

• Ionization is the only ESD tool if the ESD sensitive items includes insulators or isolated conductors

• Use ionization when grounding is not recommended, such as possible exposure to over 250 VAC

• Use ionizers to provide redundancy and a more robust ESD control program

• Dust and particulate control


50627 Portable Ionizing Air Gun

Periodic Verification Testing• Ionizers should be tested when installed and periodically thereafter

• Test offset voltage (balance) and both polarity’s discharge times

• Test with EMIT’s charged plate analyzer (S3.1) or ionization test kit (SP3.3)

Have you ever had some plastic film on your hand that you flick and flick and it continues to stick to your hand? That plastic has an electrostatic charge. For industry, EMIT offers the Ion Python Air Nozzle, Hand Gun and the Portable Ionizing Air Gun, and Chargebuster Ion Gun which companies use to neutralize the charge on particles. The compressed air easily blows off the particles. Charged particles cause significant contamination problems and/or visual imperfections for many products.

Point-of-use compressed air ionizers are usually in the form of blow-off guns that work with a supply of compressed air or nitrogen.

50645 Chargebuster Ion Gun

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/CompressedAir.pdf




Ion

izatio

n

• Point-of-use compressed air ionizer• Neutralize electrostatic charges to eliminate attraction, visual imperfections, and contamination issues by dislodging charged dust and debris • Fast < 1 second discharge times with ±30 volt offset voltage balance

Tested per ANSI/ESD STM 3.1 • Modular design with 7 foot ESD protective hose with trigger switch

• Console mounting hardware Included• Fast < 1 second discharge time tested per ANSI/

ESD S3.1• Offset voltage (balance) much less than +/- 50 volt limit per ANSI/ESD S20.20• 1 Year Limited Warranty• Made In America


50645

50645 - Chargebuster Ion Gun, 120V

50644 - Chargebuster Ion Gun, 220V

50646 - Replacement Filters, Pack of 3


50646

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6559.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/ChargebusterIonGun/50645/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/ChargebusterIonGun/50644/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/ChargebusterIonGun/50646/




Ion

izatio

n

• Point-of-use ionizer, adjustable (30-100 PSI) compressed air ionizer

• Detachable ESD protective 7’ dissipative hose

• Adjustable offset voltage balance (±20 Volts)

• Stainless steel housing

• Made in America



50622 - Controller, Hand Gun with Hose, 120V

50623 - Controller, Hand Gun with Hose, 220V

50620 - Controller, Ion Python with Foot Switch, 120V

50621 - Controller, Ion Python with Foot Switch, 220V

50625 - Replacement Foot Switch

50626 - Ion Python Filter Replacement

50625 50626

• Light weight, ergonomical design

• Unique design

• High frequency AC ionization

• Ionization “ON” indicator



50627 - Air Gun with Rechargable Batteries, 120V

50628 - Air Gun with 4 Alkaline Batteries

50629 - Static Locator without Battery Pack

• LED indication of ion output and low

battery condition

• Safety wrist cord

• Made in America


Click Here to Viewthe Static Locator

50629

50627

50622

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6530.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/IonPythonAirNozzleHandGun/50622/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/IonPythonAirNozzleHandGun/50623/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/IonPythonAirNozzleHandGun/50620/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/IonPythonAirNozzleHandGun/50621/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/IonPythonAirNozzleHandGun/50625/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/IonPythonAirNozzleHandGun/50626/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6531.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/PortableIonizingAirGun/50627/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/PortableIonizingAirGun/50628/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/PortableIonizingAirGun/50629/




Ion

izatio

n

Room Ionization

• Neutralizes charges throughout a room or

facility

• Lightweight powered grid systems are

installed overhead

• Best solution to neutralize ElectroStatic

Attraction (ESA)

• Best solution for contamination control

• Customize your system for optimal

performance

Electrostatic Attraction and Contamination Control

• Charged particles cling to products causing visual defects and contamination problems

• Air ionization enhances a filter’s effectiveness, reducing airborne particle levels


Room ionization is used when limiting electrostatic charges which occur over a wide production area is desired. Room ionization typically has powered grid systems installed overhead to provide ions throughout a room. Since ions are heavier than air, they will move to worksurfaces and the floor. Manufacturers concerned about contaminants or having a product that includes powders are often concerned with ElectroStatic Attraction (ESA) and Room Ionization frequently offers the best solution.

Methods of power distribution to the ionizers as well as other installation requirements need to be considered. After installation, these large systems will require periodic maintenance to assure the desired performance. In contrast to other ionizer applications, room ionization often involves a custom engineered system rather than an off-the-shelf product. It is important to have a supplier with an experienced design team that takes into account factors such as ceiling height and airflow in the room.

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/RoomIonizers.pdf




Ion

izatio

n

• Provides superior static control coverage and

precision performance at competitive prices

• Computer-controlled balance

• 16 zones of coverage

• Delay sequence between polarity change

• Revolutionary singer conductor delivery system

• Superior offset voltage balance

• Expandable installation

• Low maintenance

• Reliable, balanced 24/7 operation

• Made in America



Click item number above for full product details

50800 - IRIS Room Ionization System Smart Power Supply

Click Here to seethe IRIS Room

Ionization SystemBrochure

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6560.pdfhttp://www.descoemit.com/DescoEmitCatalog/Ionization/RoomIonization/50800/http://www.descoemit.com/pdf/IRIS.pdfhttp://www.descoemit.com/pdf/IRIS.pdfhttp://www.descoemit.com/pdf/IRIS.pdfhttp://www.descoemit.com/pdf/IRIS.pdf




Teste

rs

ESD Process Control and Management Solutions

• Tools and support to limit electrostatic charges

• Improve quality, productivity, and reliability of the products manufactured

• Monitor output signal, manage data, or control processes

• Leading companies use continuous monitors, ionization, and test equipment with computer data acquisition capabilities

• EMIT products provide ESD process control and management solutions.

Ionization - Benchtop and Overhead

• EMIT Zero Volt Ionizers (ZVI) provide real-time data: in line, offline or out of balance

• Able to remotely change fan speeds, alarm settings and identification


Room Ionization• Control ElectroStatic Attraction (ESA) and particulate contamination in clean room environments

• For optimum coverage and control

• Able to remotely calibrate offset voltage balance, adjust alarm settings, and monitor each room

Zero Volt Continuous Monitors

• Provides data input and output

• Can record ESD events, time usage, and failures

• Manage each ESD workstation independently and in real-time

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/DataAcquisition.pdf




Teste

rs

• New solid state touch test design with no moving parts provides a reliable solution for high volume wrist strap and ESD footwear testing• By touching the electrode button once, the SmartLog X3™ tests the resistance path limits of the worn wrist strap or ESD garment and both worn ESD footwear independently within one second • Versatile - can be used as Footwear only or Wrist Strap only tester • 5 Year Limited Warranty• Made In America

Download our Technical Bulletin - TB-6561Download our Technical Bulletin - TB-6561ADownload our Technical Bulletin - TB-6561BDownload our Technical Bulletin - TB-6564Download our Technical Bulletin - TB-6565 50730


50730 - SmartLog X3, 120V

50731 - SmartLog X3, 120V without software

50732 - SmartLog X3, Asia

50733 - SmartLog X3, Asia without software

50734 - SmartLog X3, Euro

50735 - SmartLog X3, Euro without software

50420 - SmartLog X3, footwear & wrist strap tester only

50443 - Laser barcode scanner

50446 - Numeric keypad attachment

50461 - Ethernet adapter 10/100, 120VAC

50380 - Card Reader

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6561.pdfhttp://documents.descoemit.com/PDF/TB-6561A.pdfhttp://documents.descoemit.com/PDF/TB-6561B.pdfhttp://documents.descoemit.com/PDF/TB-6564.pdfhttp://documents.descoemit.com/PDF/TB-6565.pdfhttp://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50730/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50731/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50732/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50733/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50734/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50735/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50420/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50443/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50446/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50461/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50380/




Teste

rs

50490 - TEAM Basic Software Ver. 4.99.65

50486 - TEAM Enterprise Software Lic. 1 ea Smartlog

50485 - TEAM Enterprise Software Initial 1 Lic. up to 3 Smartlogs

Import User• The Import User list is made easy with provided instructions• The software identifies duplicate entries• Allows users to be added as Emplyees, Temp Employees and Visitors• The leave of absence feature makes it easy to identify which users are on leave

User Status• User status screen allows you to view current and previous test results• Can view overall percentage for pass/fail/not tested• E-mail, save, print, filter and sort test results

Test Machine• Green/Red makes it easy to identify pass/fail• 7 languages available• Built in com port locator makes it easy to identify which port each Smartlog is installed on• Door relay can be adjusted from 0 sec to 1 min 39 sec for area access

Schedule

• Reports available in plain text, HTML and Excel format• Can be scheduled to report or backup for any time of the week• Sorting and filtering allows you to select specific information

For more complete information Click Here or on the part numbers below

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50490/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50486/http://www.descoemit.com/DescoEmitCatalog/Testers/DataAcquisition/SmartLogSolidState/50485/http://www.descoindustries.com/SmartLog/TEAMBasic.ppt




Teste

rs

Wrist Strap and ESD Footwear Testers

• EMIT SmartLog X3 is the industry’s foremost personnel grounding tester

• Even when utilizing continuous monitors, testers must be used for ESD footwear

• SmartLog X3 checks wrist straps and ESD footwear while worn

• Smartlog X3 provides electronic verification records

• Smartlog X3 e-mails supervisors when failures occur

• Smartlog X3 meet S20.20 requirement defined in the compliance verification plan

Electrostatic Attraction and Contamination Control

• Humans are a major source of ElectroStatic Discharge (ESD)

• Latent defects are not detected by normal inspection equipment

• Latent defects cause significant re-work, scrap and warranty costs

• 25% of electronics’ failure may be due to ESD

• ESD control programs return on investment is typically 10 to 1


Wrist Strap and ESD Footwear TestersThe industry’s foremost personnel grounding tester is the EMIT SmartLog X3; see Data Acquisition information on page 27. Even when utilizing Continuous Monitors, testers must be used for ESD footwear.

The EMIT SmartLog X3 is the premium product for performing periodic checks of wrist straps and ESD footwear while worn, providing electronic verification records and features such as e-mailing supervisors when failures occur. This is the effective way to conform to the ANSI/ESDS20.20-2007 section 7.3 requirement that “Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements.”

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/PersonnelGrounding.pdf




Teste

rs

• Relay time for door locking systems, password protection

• Enables users to easily connect to automated door openers

• Independent alarming conditions

• Split footplate design

• Made in America



50404 - Dual independent footwear tester

50412 - Dual independent footwear tester, no adapter

50406 - Foot plate replacement

50421 - Limit comparator

50405 - Cable for footplate

50402 - Power supply for footwear testers

50401

50406

• Wrist strap and ESD footwear system testing

• Three tests at the same time; depress contact once

to test footwear and wrist strap independently

• Split footplate design

• Made in America



50407 - Dual independent footwear and wrist strap tester

50413 - Dual independent footwear and wrist strap tester, no adapter

50562 - Dual independent footwear and wrist strap tester, UK plug

50406 - Foot plate replacement

50421 - Limit comparator

50405 - Cable for footplate50407

50404


http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6503.pdfhttp://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearTester/50404/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearTester/50412/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearTester/50406/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/LimitComparatorTesters/50421/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearTester/50405/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearTester/50402/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6502.pdfhttp://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearWristStrapTester/50407/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearWristStrapTester/50413/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearWristStrapTester/50562/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearWristStrapTester/50406/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/LimitComparatorTesters/50421/http://www.descoemit.com/DescoEmitCatalog/Testers/PersonnelGrounding/DualIndependentFootwearWristStrapTester/50405/




Teste

rs

• Test equipment is needed for compliance verification of ESD protective products

• Document the test methods and equipment used for process monitoring

• Per S20.20 test equipment is required to be capable of making the measurements

• EMIT ESD Survey Kit contains most of the test equipment necessary to meet S20.20:

- Ionization Test Kit for ionizers which includes a Static Field Meter

- EMIT Surface Resistance Test Kit for worksurfaces, floors, garments, shelving

- AC Outlet Analyzer verification of AC outlet proper wiring

- If not properly installed, ESD protected products can do more harm than good


Test equipment is needed to ensure the proper performance of ESD protective products for product qualification and to fulfill the compliance verification plan required by ANSI/

ESD S20.20.

“Process monitoring (measurements) shall be conducted in accordance with a Compliance Verification Plan that identifies the technical requirements to be verified, the measurement limits and the frequency at which those verifications shall occur. The Compliance Verification Plan shall document the test methods and equipment used for process monitoring and measurements. … Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements. The test equipment selected shall be capable of making the measurements defined in the Compliance Verification Plan.” (ANSI/ESDS20.20-2007 section 7.3)

50557 Surface Resistance Test Kit and 50595 ESD Survey Kit

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Articles/TestandMeasurement.pdf




Teste

rs

• Accurately measures RTT, RTG or resistivity [requires

optional Attachment for quick checks, factory audits or

test lab evaluation of product


• Made in America


50557 - Surface resistance test kit

50560 - Resistivity test meter attachment

• Audits ionizer’s offset voltage (balance) and charge discharge times

• Digital display of charge voltage and charge discharge time


• Made in America


50555 - Charged plate analyzer, 120 VAC

50560 - Charged plate analyzer, 220 VAC

50545 - Black AC power cord, 220V Euro

50546 - Black AC power cord, 220V UK


50545

• Effective problem solving tool that can be attached to our

ionizing air guns, items 50627 and 50628


• Made in America


50629 - Static locator without battery pack

50557

50555

50629

Click here to view the portable ionizing air guns

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/pdf/TB-6520.pdfhttp://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/SurfaceResistanceTestKit/50557/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/SurfaceResistanceTestKit/50560/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6521.pdfhttp://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ChargedPlateAnalyzer/50555/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ChargedPlateAnalyzer/50560/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ChargedPlateAnalyzer/50545/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ChargedPlateAnalyzer/50546/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/PortableIonizingAirGun/50627/http://www.descoemit.com/DescoEmitCatalog/Ionization/CompressedAirIonization/PortableIonizingAirGun/50628/http://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6548.pdfhttp://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/StaticLocator/50629/




Teste

rs • Use for periodic verification of ionizers per ANSI/ESD SP3.3 and ESD TR53

• Measure offset voltage (balance) and discharge times

• Charger applies ± polarity charge to conductive plate


• Made in America


50597 - Digital static field meter

50598 - Complete field meter/ion test kit

50591 - Test kit upgrade, portable, for ionizers

50593 - Conductive plate for field meter

50553 - Personal HBM test fixture

50597

50591

50553


• Everything needed to conduct an ESD control program survey

• Kit includes all the tools required to survey to fulfill your

ANSI/ESD S20.20 compliance verification plan

• Contents:

(1) 50598 ionization test kit (includes digital static field meter)

(1) Desco 98130 AC outlet analyzer and wrist strap tester, 120VAC US

(1) 50553 HBM test fixture

(1) 50557 surface resistance test kit

(1) 50560 resistance meter attachment

(1) Fluke 114-A meter


• Made in America

(1) Desco 09100 Jewel® wrist strap

(2) Desco 07590 foot grounders

(1 set) training paddles

(1) Heavy duty carrying case


50563 - ESD survey kit, 120V

50563

50598

50564 - ESD survey kit, 220V

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoemit.com/Warranty.aspxhttp://documents.descoemit.com/PDF/TB-6568.pdfhttp://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50597/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50598/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50591/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50593/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50553/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50598/http://www.desco.com/DescoCatalog/TestingMeasurementEquipment/PersonnelTesters/ACOutletWristStrap/98130/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/DigitalFieldMeter/50553/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/SurfaceResistanceTestKit/50557/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/SurfaceResistanceTestKit/50560/http://www.descoemit.com/Warranty.aspxhttp://www.desco.com/DescoCatalog/PersonnelGrounding/WristStrapsCoilCords/SingleWireWristStraps/JewelElasticAdjustable/09100/http://www.desco.com/DescoCatalog/PersonnelGrounding/FootGrounders/PremiumHeel/07590/http://documents.descoemit.com/PDF/TB-6569.pdfhttp://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ESDSurveyKit/50563/http://www.descoemit.com/DescoEmitCatalog/Testers/TestMeasurementEquipment/ESDSurveyKit/50564/

Lim

ited

Warra

nty




WE GUARANTEE YOU WILL BE SATISFIED WITH OUR PRODUCTS

We make every effort to ensure that our products are of the highest quality and meet all appropriate recognized industry standards. All statements, technical data, and recom-mendations contained herein are based upon tests we believe to be reliable. However, the accuracy or completeness thereof is not guaranteed. The proper and correct application of products and data is the responsibility of the user. The following is made in lieu of all war-ranties, expressed or implied:

EMIT’s only obligation shall be to replace such quantity of the product proved to be de-fective. EMIT shall not be liable for any injury, loss, or damage, direct or consequential, arising out of the use of or the inability to use the product. Before using, users shall de-termine the suitability of the product for their intended use, and users assume all risk and liability whatsoever in connection therewith.

No statement or recommendation not contained herein shall have any force or effect un-less embodied in a written agreement signed by authorized officers of Desco Industries, Inc.

LIMITED WARRANTY: Emit expressly warrants that for a period of one (5) year from the date of purchase, products will be free of defects in materials (parts) and workman-ship (labor). For complete warranty information and lots of other useful stuff, go to:

DescoEMIT.com

http://www.descoemit.com/http://www.descoindustries.com/factorieshttp://www.descoindustries.com/factories/http://www.descoemit.com/Warranty.aspx

Table Of ContentsIntroductionNew ProductsMonitoringSingle Wire MonitoringSingle Wire Impedence Monitoring ArticleJewel Workstation Continuous Monitor & Full Time Continuous Monitor & Calibration UnitDual Operator Continuous Monitor w/ Two Satellite Modules & Multi-Mount Continuous Monitor

Dual Wire MonitoringDual Wire Resistance Continuous MonitoringZero Volt MonitorDual Wire, Dual Operator Programmable MonitorUltra Low Voltage Monitor

Multi-Ground Continuous MonitorsIonizationBenchtop IonizersBenchtop Ionization ArticleBenchtop Zero Volt & Mini Zero Volt IonizerBenchtop Zero Volt Ionizer & Chargebuster Jr. High Output Ionizer

Overhead IonizationOverhead Ionization ArticleOverhead Zero Volt Ionizer w/ 3 FansCritical Environment Overhead Ionizer & Chargebuster Overhead Ionizer

Laminar Flow BenchPulsed Ion Bars & Ionization Bars

Compressed Air IonizationCompressed Air Ionization ArticleChargebuster Ion GunIon Python Compressed Air Ionization & Portable Ionizing Air Gun

Room IonizationRoom Ionization ArticleIRIS Room Ionization System

TestersData AcquisitionData Acquisition ArticleSolid State Smartlog X3Smartlog X3 TEAM Basic Software

Personnel GroundingPersonnel Grounding ArticleDual Independant Footwear / Footwear & Wriststrap Tester

Test and MeasurementTest and Measurement ArticleSurface Resistance Test Kit / Charge Plate Analyzer / Static LocatorDigital Static Field Meter and Ionization Test Kit & ESD Survey Kit

table of contents - central european trading kft.• programmable monitoring at 200 mv, 100 mv and...

Documents