1

8

2

,Tata Steel Limited

world

As Per Indian Standards and as per givenDrawing /Specification.

CR STRIPS/SHEETSWidth range from 14mm to1250mm with thickness0.20mm to 5.0mm.

TUBULAR POLES:

145x82

Precision Pipes & TubesMild Steel Wires (Black & Galvanised)Steel Fabrication (as per customer drawing/spec.)Other Engineering Products

CERTIFICATIONS

DNV BUSINESS ASSURANCECERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL

Certificate No. 1162-CPR-0530 Rev. 0.0 This Certificate consists of 2 pages

In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation), this certificate applies to the construction product

Cold formed welded structural hollow sections of non-alloy steelsType: CFCHS – Cold formed circular hollow sections (Black and galvanized)

Steel grade & Quality: S235JRH, S275(J0H, J2H), S355(J0H, J2H, K2H)

Thickness: 2.0-10.0 mm Min. Ø: 21.3 mm Max. Ø: 273.0 mm

Type: CFRHS – Cold formed rectangular hollow sections (Black and galvanized)

Steel grade & Quality: S235JRH, S275(J0H, J2H)

Thickness: 2.0-6.3 mm Size: 40 x 20 mm to 15 x 100 mm

Type: CFSHS – Cold formed circular hollow sections (Black and galvanized)

Steel grade & Quality: S235JRH, S275(J0H, J2H)

Thickness: 2.0-6.3 mm Size: 20 x 20 mm to 150 x 150 mm

Intended use: To be used in metal structures or in composite metal and concrete structures

produced by or for

Swastik Pipes LimitedVillage - Kotwan Kosi Kalan, Mile stone 97, NH-2, Delhi – Mathura Road, Tehsil-Chhatta, Distt: Mathura, India

and produced in the manufacturing plant(s)

Swastik Pipes LimitedVillage - Kotwan Kosi Kalan, Mile stone 97, NH-2, Delhi – Mathura Road, Tehsil-Chhatta, Distt: Mathura, India

This certificate attests that all provisions concerning the assessment and verificat ion of constancy of performancedescribed in Annex ZA of the standard(s) 1:2006

EN 10219-

under system 2+ are applied and that

the factory production control fulfils all the prescribed requirements set out above.This certificate remains valid during a three year period as long as the test methods and/or factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing

conditions in the factory or the plant are not modified significantly.

Initial Certification date:

2014-05-09Place and date:

Solna, 2014-07-20

This Certificate is valid until:

2017-05-09for the Notified Body 1162:

DNV GL BUSINESS ASSURANCE SWEDEN AB, SWEDEN

The audit has been performed under the supervision of:

Balwant Rai Bengt-Olov AndinLead Auditor Management Representative

Lack of fulfilment of conditions as set out in the Certification Agreement may render this Certificate invalid.This certificate has been signed digitally. For more info, see www.dnv.com/digitalsignatures

DNV GL BUSINESS ASSURANCE SWEDEN AB, Box 6046, 171 06 Solna, Sweden, TEL: +46 8 587 940 00 - www.dnv.com / www.dnvba.sePage 1 of 2

Lack of fullment of conditions as set out in the Certication Agreement may render this Certicate invalid. This Certicate has been digitally signed. See www.dnv.com/digitalsignatures for more info.

Dnv Certication DNV Business Assurance India Pvt Ltd, ”ROMA” No.10, GST. Road, Chennai – 600 016, India . Tel: +91 44 43980865. www.dnv.com

Page 1 of 2

DNV BUSINESSASSURANCE

CERTIFICATE OF FACTORY PRODUCTION CONTROL

Certicate No. 4165-2014-CE-IND Rev.1.0 This Certicate consists of 2 pages

In compliance with the Construction Product Regulation 305/2011 of the European Parliament and of the Council of 9March 2011 laying down harmonized conditions for the marketing of Construction Products, it has been stated that theconstruction product

Structural Steelcharacterised in

EN 10255:2004+A1:2007 Non-alloy steel tubes suitable for welding and threading

Produced by the manufacturer

SWASTIK PIPE LIMITED In the factory located at

Village-Kotwan Kosi Kalan, Milestone 97, NH-2, Delhi-Mathura Road Tehsil Chhatta, Dist. Mathura, U.P. India

is submitted by the manufacturer to initial type testing of the products and factory production control and that the Det Norske Veritas As has performed the initial inspection of the factory and of the factory production control and performs the continuous surveillance, assessment and approval of the

factory production control. This certificate attests that all provisions concerning the attestation of factory production control described in Annex ZA of the standards listed aboveand in accordance with the procedures given were applied. The Declaration of Performanceand CE Marking as stated in theCPR 305/2011/ EUand

Annex ZA of EN 10255:2004 + A1:2007 will be under the responsibility of Manufacturer. This certificate remains valid during a three year period as long as the conditions laid down in the harmonised technical specification in

reference or the manufacturing conditions in the factory or the factory production control itself are not modified significantly. The product liability rests with the manufacturer or his representative in accordance with the Council Directive, as amended

Initial Certificate date:

2011.02.21

Place and date:

Chennai, 2014.04.22

This Certificate is valid until:

2017.02.21 for DNV Business Assurance India Pvt Ltd

The audit has been performed under the supervision of:

Balwant Rai Hariharan Sundareswara IyerLead Auditor HEAD - Technical Services Support Centre

.

DIMENSIONS OF BLACK & GALVANISED

STEEL TUBES

TOLERANCE

Thickness Light tubes :- 8% + Not Limited

Medium & Heavy tubes : -10% + Not Limited

Weight : 1. Single tube (Light Series)

2. Single tube (Medium & Heavy Series) : +10%

3. For quantities per load of 10 tonnes min.(Light Series) : +7.5%-5%

4. For quantities per load of 10 tonnes min.(Medium & Heavy Series) : +7.5%

: +10% -8%

Length : Light, Medium & Heavy tubes : Random length of 4 to 7meters unless specified otherwise.

6.898.53

10.10

AS PER IS - 1239 (Part-1) / BS : 1387/ 1985

NOMINAL CLASS OUTSIDE DIAMETER

BORE (NB)mm inches

MINMM

15 (½ ”)

20 (3/4”)

25 (1”)

32 (1/4”)

40 (1½”)

50 (2”)

65 (2½”)

80 (3”)

100 (4”)

125 (5”)

150 (6”)

LM H

LM H

LMH

LMH

LM H

LM H

LMH

LMH

LMHMHMH

MAXMM

21.0021.0021.00

26.4026.5026.50

33.2033.3033.30

41.9042.0042.00

47.8047.9047.90

59.6059.7059.70

75.2075.3075.30

87.9088.0088.00

113.00113.10113.10138.50138.50163.90163.90

21.4021.8021.80

26.9027.3027.30

33.8034.2034.20

42.5042.9042.90

48.4048.8048.80

60.2060.8060.80

76.0076.6076.60

88.7089.5089.50

113.90115.00115.00

140.80140.80

166.50166.50

WALL THICKNESS

MM SWG

2.002.603.20

2.302.603.20

2.603.204.00

2.603.204.00

2.903.204.00

2.903.604.50

3.203.604.50

3.204.004.80

3.604.505.404.805.404.805.40

14121013121012 10

812 10

811 10

81197

1097

1086

9756565

PLAIN ENDS SCREWED & SOCKETED

Kg/Mg Mtrs/Tonne Kg/Mtr Mtrs/Tonne

0.947 1.21 1.44

1.381.561.87

1.982.412.93

2.543.103.79

3.233.564.37

4.085.036.19

5.176.427.93

6.728.369.90

9.7512.2014.5015.9017.9018.9021.30

5347

19.5021.90

5146

6356

103 82 69

149120101

175156126

245199162

310281229

394323264

505 415 341

725 641 535

1056 826 694

0.956 1.22 1.45

1.391.571.88

2.002.432.95

2.573.133.82

3.273.604.41

4.155.106.26

5.836.548.05

16.4018.40

10.0012.5014.80

1046 820 690

719637532

500412339

389319262

306278227

241196160

172153124

145117 99

100 80 686154