Turn

ing Your Assets into Dollars

Public AuctionPLANT

CLOSED

EVERYTHINGMUST SELL!

Asset Sales, Inc.Corporate Headquarters

301 Post Office Drive, Suite CIndian Trail, NC 28079

Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com info@asset-sales.com

European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH

Tel / Fax 07836.347880peteraml@asset-sales.co.uk

CNC MACHINING EQUIPMENT SURPLUS TO THE CONTINUING OPERATIONS OF

PRETECH INSTRUMENTSLATE MODEL CNC MACHINING, VERTICAL & HORIZONTAL BORING MILLS

13018 BRITTMOORE PARK DRIVE - HOUSTON, TX 77041THURSDAY, FEBRUARY 9TH @ 10:00 A.M. CST

Inspection: Wednesday, February 8th, From 8:00 A.M. - 4:00 P.M. CST

80" OM LTD. CNC VERTICAL BORING MILL WITH MILLING & 'C' AXIS

(2) FORTUNE V-TURN 46 LARGE CAPACITY CNC TURNING CENTERS

5.1" SNK IKEGAI 4-AXIS CNC TABLE TYPE HORIZONTAL BORING MILL

SFM SUNFIRM CST42160 42" SWING X 157" DOUBLE CHUCK CNC FLATBED TURNING CENTER

2013

2007

2AVAIL.

14"BORE

2008

MILLING 201398"VERT.

MACHINERY INSPECTION DATE & TIME – WEDNESDAY, FEBRUARY 8TH FROM 8:00 A.M. - 4:00 P.M. CST

2

(2) FORTUNE V-TURN 46 LARGE CAPACITY CNC TURNING CENTERS

FORTUNE V-TURN 36 CNC TURNING CENTER (2) FORTUNE V-TURN-II-26 CNC TURNING CENTERS

2007

2007 2AVAIL.

SFM SUNFIRM CST42160 42" SWING X 157" DOUBLE CHUCK CNC FLATBED TURNING CENTER

CNC TURNING CENTERS(2) FORTUNE Model V-Turn 46 Large Capacity CNC Turning Centers with 24” 3-Jaw Power Chucks, 28” Swing x 68” to Tailstock, 4.8” Spindle Bore, Spindle Speeds to 1500 RPM, 10 Station Turrets, Steady Rest, Chip Conveyors & FANUC Oi-TC CNC Controls, sn:1385, mfg. 4/2007 ● sn:1375, mfg.4/2007

FORTUNE Model V-Turn 36 CNC Turning Center with 15” 3-Jaw Power Chuck, 26” Swing x Approx. 50” to Tailstock, 3.5” Spindle Bore, Spindle Speeds to 2000 RPM, 10 Station Turret, Chip Conveyor & FANUC Oi-TC CNC Control, sn:MD1617, mfg.4/2007

(2) FORTUNE Model V-Turn-II-26 CNC Turning Centers with 12” 3-Jaw Power Chucks, 20” Swing x 25” to Tailstocks, 3” Spindle Bores, Spindle Speeds to 3500 RPM, 10 Station Turrets, Chip Conveyors & FANUC Oi-TC CNC Controls, sn:Y2-1253, mfg.2007 ● sn:MY-1375, mfg.2007

CNC HOLLOW SPINDLE FLATBED TURNING CENTER

SFM SUNFIRM Model CST42160 42” Swing x 157” Double Chuck CNC Flatbed Turning Center with 14” Bore, 31” 4-Jaw Front Chuck, 26” Back Chuck, 27” Swing Over Cross Slide, 55” Swing in Gap, Approximately 157” Max. Distance to Tailstock, 8 Station Turret, Coolant, Steady Rest, Chip Control, Enclosure & FANUC Oi-JC CNC Control, sn:27665, mfg.2008 Installed 2011

2AVAIL.

2007

2008

AUCTION SALE DATE & TIME – THURSDAY, FEBRUARY 9TH @ 10:00 A.M. CST

3

ATTENDING THE AUCTION IN PERSON?What you need to bring.....

• Your Driver’s License• Business Card

• Tax Exempt Form if Non Taxable• Bank Letter of Guarantee if Paying via

Company Check

DAHLIH MCH800 CNC HORIZONTAL MACHINING CENTER

(2) FORTUNE VICTOR V-CENTER H630 CNC HORIZONTAL MACHINING CENTERS

CNC HORIZONTAL MACHINING CENTERSDAHLIH Model MCH800 CNC Horizontal Machining Center with (2) 31” x 31” Pallets, 360 Degree Position Index, 53” X-Axis, 39” Y-Axis, 39” Z-Axis Travel, #50 Taper Spindle Speeds to Approximately 8,000 RPM, Thru-Spindle Coolant, 60 Position ATC, Chip Conveyor & FANUC 21i-MB CNC Control, sn:3003030105, mfg.2007

(2) FORTUNE Victor V-Center H630 CNC Horizontal Machining Centers with (2) 25” x 25” Pallets, 360 Degree Position Index, 36.7” X-Axis, 32.6” Y-Axis, 28.9” Z-Axis Travel, #50 Taper Spindle Speeds to Approximately 6,000 RPM, Coolant, 60 Position ATC, Chip Conveyors & FANUC 21i-MB CNC Controls, sn:MJ-1186, Installed New 2010, ● sn:MJ-1210, Installed New 7/2012

VICTOR V-CENTER-130 4-AXIS CNC VERTICAL MACHINING CENTER

2007

2AVAIL.

2007

2012

31"PALLETS

MACHINERY INSPECTION DATE & TIME – WEDNESDAY, FEBRUARY 8TH FROM 8:00 A.M. - 4:00 P.M. CST

4

CNC VERTICAL MACHINING CENTERS

(2) SAMSUNG Model MCV850/850S CNC 4-Axis Vertical Machining Centers with 33” x 80” Tables, 78” X-Axis, 33” Y-Axis, 31” Z-Axis Travel, Wired for 16" 4th Axis Rotary Tables with Tailstocks, #50 Taper Spindle Speeds to 6000 RPM, 40 Position ATC, Thru-Spindle Coolant, Chip Conveyors & FANUC Oi-MD CNC Controls, sn:11F860032, mfg.2013 ● sn:I2I860088, mfg.2013

VICTOR Model V-Center-130 4-Axis CNC Vertical Machining Center with 21” x 55” Table, 53” X-Axis, 31” Y-Axis, 28” Z-Axis Travel, Wired for 12” 4th Axis Rotary Table with Tailstock, #50 Taper Spindle Speeds to Approximately 12,000 RPM, 24 Position ATC, Chip Conveyor & FANUC Oi-MC CNC Control, sn:M2-1237, Installed New 11/2007

(2) MMK 16” 4th Axis Rotary Tables with Tailstocks (Used with Samsung 850 VMC’s)

YUASA 12” 4th Axis Rotary Table with Tailstock (Used with Victor V-130 VMC)

SAMSUNG MCV850S CNC 4-AXIS VERTICAL MACHINING CENTER

2013

SAMSUNG MCV850 CNC 4-AXIS VERTICAL MACHINING CENTER

2013

AUCTION SALE DATE & TIME – THURSDAY, FEBRUARY 9TH @ 10:00 A.M. CST

5

4" KURAKI 4-AXIS CNC TABLE TYPE HORIZONTAL BORING MILL

5.1" SNK IKEGAI 4-AXIS CNC TABLE TYPE HORIZONTAL BORING MILL

2010CNC HORIZONTAL BORING MILLS

5.1” SNK IKEGAI 4-Axis CNC Table Type Horizontal Boring Mill, Model NB130P-3.5 with 63” x 86” Rotary Table, .001°, 137” X-Axis, 98” Y-Axis, 63” Z-Axis Travel, 27” W-Axis Spindle Travel, #50 Taper Spindle Speeds to 2,500 RPM, 60 Position ATC, Thru-Spindle Coolant & FANUC 16i-MB CNC Control, sn:NN0036, mfg.2010

4” KURAKI 4-Axis CNC Table Type Horizontal Boring Mill, Model KBM11X with 38” x 41” Rotary Table, .001°, 59” X-Axis, 47” Y-Axis, 27” Z-Axis Travel, 13.7” W-Axis Spindle Travel, #50 Taper Spindle Speeds to Approximately 3000 RPM, 30 Position ATC, Thru-Spindle Coolant & FANUC 31i-MOD A5 CNC Control, sn:47424, mfg.2012

COGSDILL CNC Profile and Contouring Heads with Tools, Model ZX420-TC-CAT50-10MM

COGSDILL CNC Seat Pocket Tool, Model S01258-MBT75-S

EXACT 39” x 39” Rotary Table, Model MBT-1000-360D, sn: 106026, mfg.2014

72”H x 17”W x 30”D Angle Plates

29”H x 17”W x 32” Base Tombstones

2012

4AXIS

4AXIS

MACHINERY INSPECTION DATE & TIME – WEDNESDAY, FEBRUARY 8TH FROM 8:00 A.M. - 4:00 P.M. CST

6

80" OM LTD NEOα-20EX CNC VERTICAL BORING MILL W/MILLING 42" OM LTD NEOα-10EX CNC VERTICAL BORING MILL W/MILLING

CNC VERTICAL BORING MILLS WITH MILLING80” OM LTD. CNC Vertical Boring Mill with Milling & ‘C’ Axis, Model NEOα-20ex, 78” 4-Jaw Table, Speeds to 230 RPM, 98” Max. Swing, 63” Max. Turning Height, 31” Rail Travel, Ram Head with Milling Spindle Speeds to 2500 RPM, 24 Position ATC, FANUC Oi-TD CNC Control & Enclosure, sn:MT1823B, mfg.2013

42” OM LTD. CNC Vertical Boring Mill with Milling & ‘C’ Axis, Model NEOα-10ex, 42” 4-Jaw Table Speeds to 420 RPM, 51” Max. Swing, 49” Max. Turning Height, Ram Head with Milling Spindle Speeds to 2500 RPM, 24 Position ATC, FANUC Oi-TD CNC Control & Enclosure, sn:MT-1920, mfg.2013

64” YOUJI CNC Vertical Boring Mill with Milling & ‘C’ Axis, Model 1600 ATC + C, 63” 4-Jaw Table Speeds to 250 RPM, 78” Max. Swing, 47” Max. Cutting Height, 31” Rail Travel, Ram Head with 35” Milling Spindle Travels, Milling Spindle Speeds to 2400 RPM, 16 Position ATC, FANUC 18i-TB & Enclosure, sn:1VTL160TC02255, mfg.2011

HORIZONTAL BANDSAWCOSEN Model Auto-14AV 16” x 15” Automatic Horizontal Bandsaw with Clamping, Barfeed & Bar Stop, Variable Blade Speeds & Feeds, Coolant, sn:AH1911089, mfg.9/2002

64" YOUJI 1600 ATC +C CNC VERTICAL BORING MILL WITH MILLING & 'C' AXIS

2013 2013

COSEN AUTO-14AV 16" X 15" AUTOMATIC HORIZONTAL BANDSAW

2011

2002

MILLING MILLING

MILLING

AUCTION SALE DATE & TIME – THURSDAY, FEBRUARY 9TH @ 10:00 A.M. CST

7

HYSTER 12,000LB CAP. PROPANE FORKLIFT

2 TON ABELL-HOWE JIB CRANES

39" X 39" ROTARY TABLE

FORKLIFTS & JIB CRANES(5) 1 to 3 Ton ABELL-HOWE Floor Standing Pedestal 360° Jib Cranes with Pendant Controls

HYSTER 12,000lb Capacity Propane Forklift, Model S120XM with 2 Stage Mast, Side Shift, 4’ Forks, (4) Hard Tires, sn:F004V03224C, mfg.10/2011

YALE 4500lb Capacity Propane Forklift, Model GLC060VX with 3 Stage Mast, Side Shift, 5’ Forks, (4) Hard Tires, sn:A910V03430C, mfg.3/2007

ISUZU Diesel Flatbed Truck, Model NQR with Dual Rear Tires, 16’ Flatbed, 4 x Sliding Winches, Automatic Transmission, A/C, ABS Brakes, AM/FM/CD Radio, Approximately 130,870 Miles, sn:JALE5B16377904351, mfg.2007

AIR COMPRESSORATLAS COPCO 25 HP Rotary Screw Air Compressor Model GA18+FF with Digital PLC Controls, 129 PSIG, 105.5 CFM, sn:AP1297113, mfg.2006

Air Receiver & Holding Tank

INSPECTION DEPARTMENT, Q.C.

(2) MOJAVE Black Granite Surface Tables, 5’ x 4’ on Stands

BROWN & SHARPE Tesa Micro-Hite Electronic Height Gage

GAGEMAKER Mic-Trac Model MT-3000 Measurement Center with Programmable Control & Readout, sn:F07990, Mfg. 2008

WILSON Model 3JR Hardness Tester

(3) KING Hardness Testers

Huge Assortment of Inspection & Q.C. Department Micrometers, Calipers, MITUTOYO Digital Calipers to 60”, MITUTOYO OD Micrometers to 41”, SPI Hole Micrometers, GAGEMAKER Accessories, MITUTOYO Dial Height Gages, GO/NO/GO Gages, 2,4,6, Blocks, Dial Bore Gages, V-Blocks, etc..

2011

YALE 4,500LB CAP. PROPANE FORKLIFT

2007

ISUZU DIESEL FLATBED TRUCK

ATLAS COPCO 25HP ROTARY SCREW AIR COMPRESSOR

MISCELLANEOUSHuge Assortment of #50 Taper Tool Holders ● Boring Heads ● #50 Adjustable Right Angle Heads ● 4th Axis Rotary Tables ● Angle Plates ● Numerous VIDMAR Style Tool Cabinets ● Chains ● Magnets ● Perishable Tooling Including: Taps ● Reamers ● End Mills ● Carbide ● Drills ● C-Clamps ● Cabinetry ● Office & Plant Furniture ● Support ● DAPRA Programmable Parts Marker ● Eyebolts ● Pallet Racking ● KURT 8” & 6” Machine Vises ● Angle Plates ● 12” Super Spacer ● HARTFORD and VERTEX Rotary Tables ● DAREX Tool Sharpener ● RYOBI Abrasive Chop Saws ● Double End Carbide Bench Grinders ● Collets ● Lathe Tooling ● Lathe Holders ● Face Mills ● Pneumatic & Electric Hand Power Tools ● BRIDGEPORT Milling Machine with 9” x 48” Power Feed Table and DRO, sn:227595 ● IKEDA 3’ x 18” Radial Arm Drill with Spindle Speeds to 1500 RPM ● Etc…..

ASSORTED ANGEL PLATES

Download a lot book at www.asset-sales.com

2007

5AVAIL.

Turn

ing Your Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315

Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Texas License #13968

(2) SAMSUNG MCV850S CNC 4-AXIS VERTICAL MACHINING CENTERS

DIRECTIONS FROM HOUSTON AIRPORTExit Airport to Hardy Toll Rd. Use the left lane to take the exit toward Downtown / Texas 8 Beltway / I-45 via Frontage Road. Merge onto TX8 W Ramp. Continue onto Sam Houston Tollway W for 13.8 miles. Take the exit toward Clay Rd / Kempwood Rd. Merge onto W. Sam Houston Pkwy N. Sharp left to stay on W. Sam Houston Pkwy for 1.3 miles. Turn right onto Clay Rd. Turn right onto Brittmoore Rd for 1.3 miles. Turn left onto Tanner Rd. Turn right onto Brittmoore Park Dr. Plant will be on the right. Follow auction signs.HOTELSHoliday Inn & Suites (713) 996-8200 4606 Westway Park Blvd. - Houston, TX 77041

Sheraton N. Houston (281) 442-5100 15700 John F Kennedy Blvd. - Houston, TX 77032

UPCOMING AUCTIONSWEDNESDAY, FEBRUARY 15th & THURSDAY, FEBRUARY 16thAXON WELL INTERVENTION PRODUCTS, INC.(2) Extreme Late Model CNC Machining, Boring & Fabricating FacilitiesOnsite / OnlineConroe, TX & Houston, TX

PUBLIC AUCTIONSURPLUS EQUIPMENT

PRETECH INSTRUMENTSLATE MODEL CNC MACHINING, VERTICAL &

HORIZONTAL BORING MILLSHOUSTON, TX

THURSDAY, FEBRUARY 9TH @ 10:00 A.M. CST

ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.

Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.

All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.

All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable

to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes. Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.

PresortedFirst Class Mail

U.S. PostagePAID

Kokomo, INPermit No. 154

2013

2AVAIL.