technical catalogue insulating enclosures and installation ......(ik level 09); • reversible door;...
TRANSCRIPT
Insulating enclosures andinstallation material
Technical catalogue
1SLC001001D0201
Summary
1
2
3
4
5
6
7
8
9
10
11
Presentation
Consumer units
Emergency consumer units
Unifix cabling system
Switchboards
Boxes, equipment and various components
Wiring accessories and junction boxes
Installation material
Further technical information and applications
Overall dimensions
Code list
ABB SACE is one of the forerunners among the companies in the Group in dedica-ting considerable resources towards reaching its objectives of sustainable develop-ment and environmental protection. This is confirmed by the fact that all the companymanufacturing sites have been awarded ISO 9001 quality certification and most ofthem have also been awarded ISO 14001 environmental management system certifi-cation. The plants in Frosinone and Patrica have also been awarded the Quality,Environment and Safety Integrated System certification and are certified in complian-ce with the BS 8800 Standards for health and safety in the workplace.
ABB SACE is actively involved in continuing the policy of improving environmentalmanagement by rationalizing the consumption of raw materials and energy, preven-ting pollution, respecting water and air, reducing noise levels to a minimum, reducingwaste from production processes and carrying out periodic environmental checks atthe main suppliers’ premises.By using analysis tools such as LCA (Life Cycle Assessment), from the initial designstages ABB SACE assesses and improves the environmental performance of itsproducts throughout their entire life cycle in order to guarantee maximum efficiency intechnical and energy performance during operation, control and reduce environmen-tal impact in the manufacturing stage and define end-of-life procedures.
All these goals and activities are the result of a far-sightedness in adoptingecological policies and methods of reducing environmental impact and, here too,ABB SACE is, as already seen in the quality of its products, a leader on the Italiancompany scene.
ABB SACEand its commitment to protecting the environment
Plant in Marostica (Vicenza-Italy)
Presentation
Index
1/1ABB SACE
Products offered by ABB for distribution in the residential and tertiary sectors ...................... 1/2
1
ABB offers a range of consumer units and switchboards for theinstallation of modular components that enables to implementany type of application for power distribution in the residentialand tertiary environments operating under the highest safetyconditions and with significant savings of time.Among the several products that form this offer, the Unibox
consumer units are distinguished by a design, which perfectlyfits into any decor, choosing between the wall-mounting versionand the new flush-mounting version.Estetica and Europa Series consumer units and the wall-mounting covers are available in the modern RAL 9016 white,which substitute the models in RAL 9001.
In the range of switchboards, the Livorno Series meets first of allthe requirements arising in emergency situations in which a fastand efficient operating mechanism for shutdown of plant isrequired.The Marostica Series switchboards are designed to accomodateof the main IEC 309-1 sockets currently on the market, thus
PresentationProducts offered by ABB for distribution in the residential andtertiary sectors
1/2 ABB SACE
1
PresentationProducts offered by ABB for distribution in the residentialand tertiary sectors
1/3ABB SACE
1
resulting particularly suitable for installation in shops, warehouses,fairs, work sites, and so on.
To execute the terminal part of an electric plant, ABB offers arange of products that includes empty enclosures and controldevices, also in versions for installation in rigid and protectiveconduits.Junction and wiring accessories boxes present a safe use evenunder the most difficult environmental conditions: in particular
waterproof boxes guarantee full protection in operations forjunction, branch connection and installation of equipments.In a “state of the art” electric plant, even details are carefullyimplemented. To secure total use safety and operationalefficiency of the plant, minor components and accessories forerection of electrical equipment of ABB are made in compliancewith the reference international Standards; metal section bars,cable-ties and fixing and cabling accessories are available in awide assortment to satisfy any kind of application.
Unibox consumerunits: elegant andfunctional even in theflush-mountingversion
Unibox doubles.Elegant design andpracticality for installation anduse are now available also inthe flush-mounting version ofthe consumer units IP 40 ofABB SACE for application inthe residential and tertiaryenvironments.The new Unibox consumerunits, manufactured in a self-
PresentationProducts offered by ABB for distribution in the residential andtertiary sectors
extinguishing thermoplasticmaterial of colour RAL 9016white, integrate themselveseasily in whichever decorationsolution; for the door, it ispossible to choose betweenthe transparent smokedversion and the opaqueversion.The models in the range canaccommodate equipments of8 to 54 modules that can becabled more easily extractingthe frame to work on thebench.Resistance to chemicalagents, atmospheric agents,UV rays and shocks isguaranteed; protection degreeis IP 40.Accessories make it possibleto design their configurationwith an accurate repartition ofoutlines, and a particularcompleteness of functions.The flush-mounting Uniboxconsumer units aremanufactured in compliancewith CEI 23-48 and 23-49Standards, and IEC 670.They have obtained the IMQapproval.Functionality and safety ofinstallation and use of the newflush-mounting Uniboxconsumer units guaranteequality of constructioncharacteristics, in particular:
• protection degree IP 40;
• insulation class II;
• self-extinguishingthermoplastic material andresistant to abnormal heatand fire up to 650 °C (glowwire test), in compliance withIEC 695-2-1 Standard ;
• operating temperature from
-20 °C to +85 °C;
1/4 ABB SACE
1
PresentationProducts offered by ABB for distribution in the residential andtertiary sectors
• flush-mounting box withpush-in inlet for entrance ofprotective corrugatedconduits;
• extractable DIN rail frame;
• DIN 150 mm inter-axisbetween the rows;
• terminal holders andterminal bars suppliedseparately or alreadyassembled;
• shock resistance: 10 Joules(IK level 09);
• reversible door;
• door opening with push-pullmechanism;
• opening of the door up to180 º for multi-row consu-mer units;
• equipped with a filmprotected door;
• a lock with a coded key canbe fitted;
• designed for the use of theUNIFIX SL fast-cablingsystem;
• equipped with slots at theengagement points tocompensate possibledefects during the installationof the flush-mounting box.
1/5ABB SACE
1
Consumer units
Index
2/1ABB SACE
2Summary table ........................................................................................................................2/2
IP 40 flush-mounting consumer units
Unibox Series ..........................................................................................................................2/5
Estetica Series ......................................................................................................................2/11
Europa Series .......................................................................................................................2/17
IP 40 wall-mounting consumer units
Unibox Series ........................................................................................................................2/23
Europa Series .......................................................................................................................2/29
Europa Polycarbonate Series ...............................................................................................2/35
Wall-mounting covers ............................................................................................................2/41
IP 55 wall-mounting consumer units
IP 55 Europa Series ..............................................................................................................2/45
IP 65 wall-mounting consumer units
IP 65 Fly Polycarbonate Series .............................................................................................2/51
IP 65 Europa Polycarbonate Series ......................................................................................2/57
IP 40 and IP 55 panel fronts
IP 40 fronts ............................................................................................................................2/63
IP 55 fronts ............................................................................................................................2/63
2/2 ABB SACE
2Without door
RAL 9016 white
–
–
1SL2004A00
160x180x82
–
1SL2008A00
230x180x82
–
1SL2012A00
300x180x82
1SL2013A00
410x180x82
–
1SL2014A00
300x395x92
1SL2016A00
300x545x92
–
With transparent,smoky, horizontallyhinged door
RAL 9016 whiteRAL 7024 grey
–
–
1SL2024A00 -
12 037
160x180x90
–
1SL2028A00 -
12 038
230x180x90
–
1SL2032A00 -
12 042
300x180x90
1SL2033A00 -
12 043
410x180x90
–
1SL2034A00 -
12 044
300x395x100
1SL2036A00 -
12 046
300x545x100
–
Estetica Series
residentialapplication
With opaque,vertically hingeddoor
RAL 9016 whiteRAL 7035 grey
–
–
–
–
1SL2040A00 -
12 026
230x180x90
–
1SL2041A00 -
12 027
300x180x90
–
–
1SL2045A00 -
12 030
300x395x90
1SL2048A00 -
12 031
300x545x90
1SL2052A00 -
12 035
410x545x100
Europa Series
residentialapplication
With transparent,smoky, verticallyhinged door
RAL 9016 whiteRAL 7035 grey
–
–
–
–
1SL2057A00 -
12 058
230x180x90
–
1SL2061A00 -
12 062
300x180x90
–
–
1SL2063A00 -
12 064
300x395x90
1SL2065A00 -
12 066
300x545x90
1SL2067A00 -
12 068
410x545x100
Without door
RAL 9016 whiteRAL 7035 grey
–
–
–
–
12 208 - 12 228
215x220x105
–
12 212 - 12 232
295x245x115
–
–
12 214 - 12 234
295x390x115
12 216 - 12 236
295x515x115
12 217 - 12 237
405x515x115
Unibox Series
residential/tertiary application
With opaque,vertically hingeddoor
RAL 9016 whiteRAL 7035 grey
–
–
–
–
12 238 - 12 248
215x220x105
–
12 242 - 12 252
295x245x115
–
–
12 244 - 12 254
295x390x115
12 246 - 12 256
295x515x115
12 247 - 12 257
405x515x115
With transparent,smoky, verticallyhinged door
RAL 9016 whiteRAL 7035 grey
–
–
–
–
12 258 - 12 268
215x220x105
–
12 262 - 12 272
295x245x115
–
–
12 264 - 12 274
295x390x115
12 266 - 12 276
295x515x115
12 267 - 12 277
405x515x115
Europa Series
residential/tertiaryapplication
Without door
RAL 9016 whiteRAL 7035 grey
–
–
–
–
1SL2408A00 -
12 428
230x200x95
–
1SL2412A00 -
12 432
305x200x95
–
–
1SL2414A00 -
12 434
305x350x95
1SL2416A00 -
12 436
305x500x120
1SL2417A00 -
12 437
380x570x120
IP 40 flush-mounting consumer units IP 40 wall-mounting consumer units
Mo
dul
es
2
3
4
6
8
10
12
18
20
24
36
54
Consumer unitsSummary table
Unibox Series
residentialapplication
With opaque,vertically hingeddoor
RAL 9016 white
–
–
–
–
1SL0500A00
214x238x110
–
1SL0501A00
293x262x110
–
–
1SL0502A00
293x408x118
1SL0503A00
293x533x118
1SL0504A00
401x533x118
With transparent,smoky, verticallyhinged door
RAL 9016 white
–
–
–
–
1SL0510A00
214x238x110
–
1SL0511A00
293x262x110
–
–
1SL0512A00
293x408x118
1SL0513A00
293x533x118
1SL0514A00
401x533x118
2/3ABB SACE
2With transparent,smoky, verticallyhinged door
RAL 9016 whiteRAL 7035 grey
–
–
–
–
1SL2458A00 -
12 468
230x200x95
–
1SL2462A00 -
12 472
305x200x95
–
–
1SL2464A00 -
12 474
305x350x95
1SL2466A00 -
12 476
305x500x120
1SL2467A00 -
12 477
380x570x120
EuropaPolycarbonateSeries
tertiary/industrialapplication
Without door
RAL 7035 grey
2-4 modules
12 702
100x160x85
–
12 704
140x220x110
–
12 708
205x220x110
–
12 712
275x220x110
–
–
12 714
275x370x110
12 716
275x570x110
12 718
380x570x120
Wall covers
residential/tertiaryapplication
Without door
RAL 9016 whiteRAL 7035 grey
1SL2402A00 -
12 422
50x140x65
–
1SL2404A00 -
12 424
95x160x65
1SL2406A00 -
12 426
140x160x65
–
–
–
–
–
–
–
–
IP 55 Europa Series
tertiary/industrial application
Springclosing
RAL 7035 grey
–
–
12 644
125x180x105
12 646
160x180x105
–
12 650230x180x105
12 654250x320x139
–
–
12 652
250x320x135
–
–
–
IP 65 FlyPolycarbonateSeries
residential/tertiary/industrialapplication
With transparentdoor
(*) opaque door
RAL 7035 grey
2-4 modules
12 742 - 12 722(*)
100x160x100
–
–
–
12 743
205x220x140
–
12 745
275x220x140
–
–
12 746
275x370x140
12 747
275x570x140
–
Keylock
RAL 7035 grey
–
–
12 684
125x180x105
12 686
160x180x105
–
12 690
230x180x105
–
–
12 692
150x230x139
–
–
–
IP 65 Europa PolycarbonateSeries
residential/tertiary/industrialapplication
With opaque,vertically hingeddoor
RAL 7035 grey
–
–
12 724
140x220x140
–
12 728
205x220x140
–
12 732
275x220x140
12 733
380x220x140
–
12 734
275x370x140
12 735380x370x140
12 736275x570x140
12 738
380x570x140
With transparent,smokyverticallyhinged door
RAL 7035 grey
–
–
12 744
140x220x140
–
12 748
205x220x140
–
12 752
275x220x140
12 753
380x220x140
–
12 754
275x370x140
12 755380x370x140
12 756275x570x140
12 758
380x570x140
IP 40 and IP 55panel fronts
tertiary/industrialapplication
Panel fronts
IP 40 IP 55
RAL 7035 grey
12 362
81x90x50
12 363
99x90x50
12 364 12 658
117x90x50 125x180x34
12 659
160x180x34
–
12 660
230x180x34
–
–
–
–
–
–
IP 40 wall-mounting consumer units IP 55 and IP 65 wall-mounting consumer units Fronts
Consumer unitsSummary table
With opaque,vertically hingeddoor
RAL 9016 whiteRAL 7035 grey
–
–
–
–
1SL2438A00 -
12 448
230x200x95
–
1SL2442A00 -
12 452
305x200x95
–
–
1SL2444A00 -
12 454
305x350x95
1SL2446A00 -
12 456
305x500x120
1SL2447A00 -
12 457
380x570x120
Europa Series
residential/tertiary application
Residential application
1SLC
0010
02F
0001
2/5ABB SACE
2
Technical characteristics• protection degree IP 40
• insulation class II• available in 2 versions: with transparent, smoky door and
with opaque door both with vertical hinge• colour RAL 9016 white• available in self-extinguishing thermoplastic material, resistant
to abnormal heat and fire up to 650 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• resistant to chemical agents (water, saline solutions, acids,mineral bases and oils), atmospheric agents and UV rays
• operating temperature from -20 °C to +85 °C• shock resistance 10 Joules (IK level 09)• door opening with push-pull mechanism• reversible door with protective film (to be removed only after
the installation is completed), designed to be fitted with acoded lock
• flush-mounting box with push-in inlet for entrance of protecti-ve corrugated conduits
• extractable DIN rail frame to facilitate bench cabling• DIN 150 mm inter-axis between the rows
• all models designed for the use of the UNIFIX SL fast-cabling system
• consumer units manufactured to compensate possibledefects during the installation (thanks to slots at the pointswhere the front parts are hooked on)
• consumer units manufactured in compliance with CEI 23-48,CEI 23-49 and IEC 60 670 Standards
• consumer units are supplied complete with:- 4 module covers per row- 1 self-adhesive label per row- 1 plate for CEI 23-51 certification- instruction sheet
IP 40 Unibox Series flush-mountingconsumer units obtained the IMQmark of approval
IMQ mark
Accessories .......................................... page 2/8 Technical details ............................... page 9/1 Overall dimensions ......................... page 10/2
IP 40 flush-mounting consumer unitsUnibox Series
1SLC
0010
01F
0001
2/6 ABB SACE
2
IP 40 flush-mounting consumer unitsUnibox Series
8 modules
With transparent, smoky vertically hinged door
RAL 9016 white
With opaque, vertically hinged door
RAL 9016 white
12 modules 24 modules
Code Dimensions (mm) Box/packWxHxD No items
1SL0510A00 214x238x110 1/9
Code Dimensions (mm) Box/packWxHxD No items
1SL0500A00 214x238x110 1/9
Code Dimensions (mm) Box/packWxHxD No items
1SL0511A00 293x262x110 1/7
Code Dimensions (mm) Box/packWxHxD No items
1SL0501A00 293x262x110 1/7
Code Dimensions (mm) Box/packWxHxD No items
1SL0512A00 293x408x118 1/5
Code Dimensions (mm) Box/packWxHxD No items
1SL0502A00 293x408x118 1/5
1SLC
0010
21F
0001
1SLC
0010
03F
0001
1SLC
0010
04F
0001
1SLC
0010
07F
0001
1SLC
0010
09F
0001
1SLC
0010
08F
0001
2/7ABB SACE
2
36 modules 54 modules
Code Dimensions (mm) Box/packWxHxD No items
1SL0513A00 293x533x118 1/3
Code Dimensions (mm) Box/packWxHxD No items
1SL0503A00 293x533x118 1/3
Code Dimensions (mm) Box/packWxHxD No items
1SL0514A00 401x533x118 1/1
Code Dimensions (mm) Box/packWxHxD No items
1SL0504A00 401x533x118 1/1
With opaque, vertically hinged door
RAL 9016 white
With transparent, smoky vertically hinged door
RAL 9016 white
IP 40 flush-mounting consumer unitsUnibox Series
1SLC
0010
05F
0001
1SLC
0010
06F
0001
1SLC
0010
10F
0001
1SLC
0010
11F
0001
2/8 ABB SACE
2
Terminal holders Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well as personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
FLC
O92
27
FLC
O92
26
Terminal blocks
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
IP 40 flush-mounting consumer unitsAccessories for Unibox Series
Code Description Box/pack No. items12 492 for 8 modules – composed of 12540x1 + 12531x1 + 12532x2 10/4012 495 for 12 modules – composed of 12541x1 + 12532x2 10/4012 504 for 24 modules – composed of 12541x2 + 12531x2 + 12533x2 10/4012 505 for 36 modules – composed of 12541x2 + 12531x2 + 12534x2 10/4012 506 for 54 modules – composed of 12542x2 + 12532x2 + 12535x2 5/20
Code Description For consumer units Box/Packtype No items
12 540 for 8 modules 1SL0500A00 – 1SL0510A00 12/14412 541 for 12 modules 1SL0501A00 – 1SL0511A00 12/144
per row 1SL0502A00 – 1SL0512A001SL0503A00 – 1SL0513A00
12 542 for 18 modules per row1SL0504A00 – 1SL0514A00 12/108
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separated from each other.
1SLC
0010
13F
0001
2/9ABB SACE
2
Spare doors
FLC
O92
77
Module covers
FLC
O92
28
Code Box/packNo items
12 860 50/1500
Lock with key
Code Description Box/packNo items
12 530 coded type 20/300
FLC
O92
74
IP 40 flush-mounting consumer unitsAccessories for Unibox Series
OpaqueRAL 9016 For consumer units Box/packwhite type No items12 511 1SL0500A00 1/2512 512 1SL0501A00 1/1512 513 1SL0502A00 1/1012 514 1SL0503A00 1/512 515 1SL0504A00 1/5
Transparent smoky For consumer units Box/packtype No items
12 521 1SL0510A00 1/2512 522 1SL0511A00 1/1512 523 1SL0512A00 1/1012 524 1SL0513A00 1/512 525 1SL0514A00 1/5
The mechanism for push-pull code No 12526 (in packs of 5 items) should bealways ordered with each door.
Code Colour No modules Box/packNo items
1SL2857A00 RAL 9016 white 1 50/15001SL2859A00 RAL 9016 white 4 50/600
1SLC
0010
14F
0001
Screw lead sealing accessory
FLC
O98
00
Residential application
2/11ABB SACE
2
Technical characteristics• protection degree IP 40• insulation class II• available in 3 versions: without door, with white opaque or
transparent smoky door with horizontal hinge• available in the following material:- RAL 9016 white and RAL 7024 grey thermoplastic, self-
extinguishing and resistant to abnormal heat and fire up to650 °C (glow wire test) in compliance with IEC 60695-2-1Standard
• resistant to chemical agents (water, saline solutions, acids,mineral bases and oils), atmospheric agents and UV rays
• operating temperature from -20 °C to +85 °C• shock resistance 6 Joules• flush-mounting enclosure with push-in inlet for entrance of
protective corrugated conduits
• extractable DIN rail frame to facilitate bench cabling• consumer units manufactured to compensate possible
defects during the installation (thanks to slots at the pointswhere the front parts are hooked on)
• models with 8 modules and more designed for the use ofthe UNIFIX SL fast-cabling system
• consumer units manufactured in compliance with CEI 23-48,CEI 23-49 and IEC 60 670 Standards
• consumer units are supplied complete with:- aesthetic flanges for covering the housing door holes
(2 flanges supplied for each door; only for models withoutdoor)
- 4 module covers per row- 1 self-adhesive label per row- 1 plate for CEI 23-51 certification- instruction sheet
Accessories ........................................ page 2/14 Technical details ............................... page 9/1 Overall dimensions ......................... page 10/4
IP 40 flush-mounting consumer unitsEstetica Series
IP 40 Estetica Series flush-mountingconsumer units obtained the IMQmark of approval
IMQ mark
1SLC
0010
15F
0001
2/12 ABB SACE
2
IP 40 flush-mounting consumer unitsEstetica Series
Code Dimensions (mm) Box/packWxHxD No items
1SL2004A00 160x180x82 1/24
4 modules
Without door
RAL 9016 white
With transparent, smoky horizontally hinged door
RAL 7024 grey
With transparent, smoky horizontally hinged door
RAL 9016 white
Code Dimensions (mm) Box/packWxHxD No items
1SL2024A00 160x180x90 1/24
Code Dimensions (mm) Box/packWxHxD No items
12 037 160x180x90 1/24
Code Dimensions (mm) Box/packWxHxD No items
1SL2008A00 230x180x82 1/14
8 modules
Code Dimensions (mm) Box/packWxHxD No items
12 038 230x180x90 1/14
Code Dimensions (mm) Box/packWxHxD No items
1SL2028A00 230x180x90 1/14
Code Dimensions (mm) Box/packWxHxD No items
1SL2012A00 300x180x82 1/10
12 modules
Code Dimensions (mm) Box/packWxHxD No items
12 042 300x180x90 1/10
Code Dimensions (mm) Box/packWxHxD No items
1SL2032A00 300x180x90 1/10
FLC
O90
01
FLC
O90
02
FLC
O90
03
FLC
O90
07
FLC
O90
08
FLC
O90
09
FLC
O90
13
FLC
O90
14
FLC
O90
15
2/13ABB SACE
2
IP 40 flush-mounting consumer unitsEstetica Series
Code Dimensions (mm) Box/packWxHxD No items
1SL2013A00 410x180x82 1/6
18 modules
Code Dimensions (mm) Box/packWxHxD No items
12 043 410x180x90 1/6
Code Dimensions (mm) Box/packWxHxD No items
1SL2033A00 410x180x90 1/6
Code Dimensions (mm) Box/packWxHxD No items
1SL2014A00 300x395x92 1/5
24 modules
Code Dimensions (mm) Box/packWxHxD No items
12 044 300x395x100 1/5
Code Dimensions (mm) Box/packWxHxD No items
1SL2034A00 300x395x100 1/5
Code Dimensions (mm) Box/packWxHxD No items
1SL2016A00 300x545x92 1/3
36 modules
Code Dimensions (mm) Box/packWxHxD No items
12 046 300x545x100 1/3
Code Dimensions (mm) Box/packWxHxD No items
1SL2036A00 300x545x100 1/3
Without door
RAL 9016 white
With transparent, smoky horizontally hinged door
RAL 7024 grey
With transparent, smoky horizontally hinged door
RAL 9016 white
FLC
O90
04
FLC
O90
05
FLC
O90
06
FLC
O90
10
FLC
O90
11
FLC
O90
12
FLC
O90
16
FLC
O90
17
FLC
O90
18
2/14 ABB SACE
2
IP 40 flush-mounting consumer unitsAccessories for Estetica Series
Terminal holders
Code Description For consumer units Box/packtype No items
12 540 for 8 modules 1SL2008A00 – 1SL2028A00 – 12 038 12/14412 541 for 12 modules 1SL2012A00 – 1SL2032A00 – 12 042 12/144
per row 1SL2014A00 – 1SL2034A00 – 12 0441SL2016A00 – 1SL2036A00 – 12 046
12 542 for 18 modules 1SL2013A00 – 1SL2033A00 – 12 043 12/108per row
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separated from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well as personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
FLC
O92
27
FLC
O92
26
Terminal blocks
Box/packCode Description No items12 492 for 8 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 495 for 12 modules – composed of 12541x1 + 12532x2 10/4012 503 for 18 modules – composed of 12542x1 + 12531x1 + 12534x1 10/4012 504 for 24 modules – composed of 12541x2 + 12531x2 + 12533x2 10/4012 505 for 36 modules – composed of 12541x2 + 12531x2 + 12524x2 10/40
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
13F
0001
2/15ABB SACE
2
IP 40 flush-mounting consumer unitsAccessories for Estetica Series
Module covers Aesthetic covers
Spare doors Screw lead sealing accessory
Code Colour No modules Box/packNo items
1SL2857A00 RAL 9016 white 1 50/15001SL2859A00 RAL 9016 white 4 50/60012 895 RAL 7024 grey 1 50/150012 896 RAL 7024 grey 4 50/600
Code Colour Box/packNo items
1SL2868A00 RAL 9016 white (pair) 10/12012 869 RAL 7024 grey (pair) 10/120
Transparent smoky RAL 9016 white For consumer units Box/packopaque type No items
12 051 1SL2047A00 1SL2024A00 – 12 037 1/8012 053 1SL2049A00 1SL2028A00 – 12 038 1/5012 055 1SL2050A00 1SL2032A00 – 12 042 1/50
1SL2034A00 – 12 0441SL2036A00 – 12 046
12 060 1SL2056A00 1SL2033A00 – 12 043 1/50
Code Box/packNo items
12 860 50/1500
FLC
O92
28
FLC
O92
39
FLC
O92
29
1SLC
0010
14F
0001
FLC
O98
02
Residential application
2/17ABB SACE
2
IP 40 flush-mounting consumer unitsEuropa Series
Technical characteristics• protection degree IP 40• insulation class II• available in 2 versions: with opaque door and with transpa-
rent, smoky door both with vertical hinge• available in the following material:
- RAL 9016 white and RAL 7035 grey thermoplastic, self-extinguishing and resistant to abnormal heat and fire up to650 °C (glow wire test) in compliance with IEC 60695-2-1Standard
• resistant to chemical agents (water, saline solutions, acids,mineral bases and oils), atmospheric agents and UV rays
• operating temperature from -20 °C to +85 °C• shock resistance 6 Joules• door designed to be fitted with a pin lock code 12 867• flush-mounting enclosure with push-in inlet for entrance of
protective corrugated conduits
Accessories ........................................ page 2/20 Technical details ............................... page 9/1 Overall dimensions ......................... page 10/6
• extractable DIN rail frame to facilitate bench cabling• consumer units manufactured to compensate possible
defects during the installation (thanks to slots at the pointswhere the front parts are hooked on)
• all models designed for the use of the UNIFIX SL fast-cabling system
• consumer units manufactured in compliance with CEI 23-48,CEI 23-49 and IEC 60 670 Standards
• consumer units are supplied complete with:- 4 module covers per row- 1 self-adhesive label per row- 1 plate for CEI 23-51 certification- instruction sheet
IP 40 Europa Series flush-mountingconsumer units obtained the IMQmark of approval
IMQ mark
1SLC
0010
16F
0001
2/18 ABB SACE
2
IP 40 flush-mounting consumer unitsEuropa Series
8 modules
With opaque vertically hinged door
RAL 9016 white / RAL 7035 grey
With transparent, smoky vertically hinged door
RAL 9016 white / RAL 7035 grey
12 modules 24 modules
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2040A00 white 230x180x90 1/1412 026 grey 230x180x90 1/14
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2057A00 white 230x180x90 1/1412 058 grey 230x180x90 1/14
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2041A00 white 300x180x90 1/1012 027 grey 300x180x90 1/10
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2061A00 white 300x180x90 1/1012 062 grey 300x180x90 1/10
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2045A00 white 300x395x90 1/512 030 grey 300x395x90 1/5
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2063A00 white 300x395x90 1/512 064 grey 300x395x90 1/5
FLC
O90
19
FLC
O90
20
FLC
O90
21
FLC
O90
24
FLC
O90
25
FLC
O90
26
2/19ABB SACE
2
IP 40 flush-mounting consumer unitsEuropa Series
36 modules 54 modules
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2048A00 white 300x545x90 1/312 031 grey 300x545x90 1/3
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2065A00 white 300x545x90 1/312 066 grey 300x545x90 1/3
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2052A00 white 410x545x100 1/112 035 grey 410x545x100 1/1
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2067A00 white 410x545x90 1/112 068 grey 410x545x90 1/1
With opaque vertically hinged door
RAL 9016 white / RAL 7035 grey
With transparent, smoky vertically hinged door
RAL 9016 white / RAL 7035 grey
FLC
O90
22
FLC
O90
23
FLC
O90
27
FLC
O90
28
2/20 ABB SACE
2
IP 40 flush-mounting consumer unitsAccessories for Europa Series
Terminal holders
Code Description For consumer units Box/packtype No items
12 540 for 8 modules 1SL2040A00 – 12 026 – 1SL2057A00 – 12 058 12/14412 541 for 12 modules 1SL2041A00 – 12 027 – 1SL2061A00 – 12 062 12/144
per row 1SL2045A00 – 12 030 – 1SL2063A00 – 12 0641SL2048A00 – 12 031 – 1SL2065A00 – 12 066
12 542 for 18 modules 1SL2052A00 – 12 035 – 1SL2067A00 – 12 068 12/108per row
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separated from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well as personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
FLC
O92
27
FLC
O92
26
Terminal blocks
Box/packCode Description No items12 492 for 8 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 495 for 12 modules – composed of 12541x1 + 12532x2 10/4012 504 for 24 modules – composed of 12541x2 + 12531x2 + 12533x2 10/4012 505 for 36 modules – composed of 12541x2 + 12531x2 + 12524x2 10/4012 506 for 54 modules – composed of 12542x2 + 12532x2 + 12535x2 5/20
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
13F
0001
2/21ABB SACE
2
IP 40 flush-mounting consumer unitsAccessories for Europa Series
Module covers Lock with key
Spare doors Screw lead sealing accessory
Code Colour No modules Box/packNo items
1SL2857A00 RAL 9016 white 1 50/15001SL2859A00 RAL 9016 white 4 50/60012 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Code Description Box/packNo items
12 867 pin type 10/300
Opaquewhite grey For consumer units Box/packRAL 9016 RAL 7035 type No items1SL2078A00 12 070 1SL2040A00 – 12 026 1/501SL2079A00 12 071 1SL2041A00 – 12 027 1/501SL2080A00 12 072 1SL2045A00 – 12 030 1/251SL2081A00 12 073 1SL2048A00 – 12 031 1/101SL2088A00 12 087 1SL2052A00 – 12 035 1/10
Transparent smokyFor consumer units Box/pack
type No items12 074 1SL2057A00 – 12 058 1/5012 075 1SL2061A00 – 12 062 1/5012 076 1SL2063A00 – 12 064 1/2512 077 1SL2065A00 – 12 066 1/2012 089 1SL2067A00 – 12 068 1/10
Code Box/packNo items
12 860 50/1500
FLC
O92
28
FLC
O92
31
FLC
O92
32
1SLC
0010
14F
0001
FLC
O98
01
Residential/tertiary application
2/23ABB SACE
2
IP 40 wall-mounting consumer unitsUnibox Series
Technical characteristics• protection degree IP 40• insulation class II• available in 3 versions: without door, with opaque door and
with transparent, smoky door with vertical hinge• available in RAL 9016 white and RAL 7035 grey• in thermoplastic, self-extinguishing and resistant to abnormal
heat and fire up to 650 °C (glow wire test) in compliance withIEC 60695-2-1 Standard
• resistant to chemical agents (water, saline solutions, acids,mineral bases and oils), atmospheric agents and UV rays
• operating temperature from -20 °C to +85 °C• shock resistance 10 Joules (IK level 09)• door opening with push-pull mechanism• door designed to be fitted with a coded lock code 12 530• base of the consumer unit fitted with a special system to
cover the holes used to attach it to the wall to guaranteeperfect insulation
• extractable DIN rail frame to facilitate bench cabling that canbe angled at a fixed position to make it easier to work on theconnection cables. It can also be dismantled (and snappedon to reassemble it) to make it easier to cable the individualwires. The frame can be snapped onto the base of theconsumer unit without having to use any extra screws
• all the models are provided with one extra module per rowthat can be used by removing the 1/2 module trimmings atthe ends of each row
• screws for fixing the cover in rapid pitch insulating thermopla-stic material that can be lead sealed easily without extraaccessories, making it possible to compensate for unevenbrickwork up to 4 mm
• highest versatility in the trunking (trimming) and conduit(flange for conduits up to diameter of 40 mm) derivations
• a cable holding system guarantees safe and tidy cablingsecuring the input and output cables to a special accessorythat protects the terminals from direct mechanical interference(excluded model with 8 modules)
• models with 8 modules and more designed for the use ofthe UNIFIX SL fast-cabling system
• personalised finish, on request (bur, marble, patterned, etc.)• consumer units manufactured in compliance with CEI 23-48,
CEI 23-49 and IEC 60 670 Standards• components and accessories are easy to assembly by
snapping on, without the need for screws• elegant attractive line following the latest trends in design.
(patented model)• consumer units supplied complete with:
- 4 module covers per row- 1 self-adhesive label per row- protective film for door- cable-clip accessory- 5 transparent ties (100x2.5 mm) for securing cables- 4 screws/wall plugs for attaching to the wall- rigid flange for branch connections with conduits- 1 plate for CEI 23-51 certification- instruction sheet
Accessories ........................................ page 2/26 Technical details ............................... page 9/1 Overall dimensions ......................... page 10/8
1SLC
8010
12F
1001
FLC
O99
18
IP40 Unibox Series wall-mountingconsumer units obtained the IMQmark of approval
IMQ mark
2/24 ABB SACE
2
IP 40 wall-mounting consumer unitsUnibox Series
8 modules
Without door
RAL 9016 white / RAL 7035 grey
With transparent, smoky vertically hinged door
RAL 9016 white / RAL 7035 grey
With opaque, vertically hinged door
RAL 9016 white / RAL 7035 grey
12 modules 24 modules
Code Colour Dimensions (mm) Box/packWxHxD No items
12 208 white 215x220x105 1/912 228 grey 215x220x105 1/9
Code Colour Dimensions (mm) Box/packWxHxD No items
12 238 white 215x220x105 1/912 248 grey 215x220x105 1/9
Code Colour Dimensions (mm) Box/packWxHxD No items
12 258 white 215x220x105 1/912 268 grey 215x220x105 1/9
Code Colour Dimensions (mm) Box/packWxHxD No items
12 212 white 295x245x115 1/712 232 grey 295x245x115 1/7
Code Colour Dimensions (mm) Box/packWxHxD No items
12 242 white 295x245x115 1/712 252 grey 295x245x115 1/7
Code Colour Dimensions (mm) Box/packWxHxD No items
12 262 white 295x245x115 1/712 272 grey 295x245x115 1/7
Code Colour Dimensions (mm) Box/packWxHxD No items
12 214 white 295x390x115 1/512 234 grey 295x390x115 1/5
Code Colour Dimensions (mm) Box/packWxHxD No items
12 244 white 295x390x115 1/512 254 grey 295x390x115 1/5
Code Colour Dimensions (mm) Box/packWxHxD No items
12 264 white 295x390x115 1/512 274 grey 295x390x115 1/5
FLC
O90
47
FLC
O90
49
FLC
O90
60
FLC
O90
59
FLC
O90
58
FLC
O90
52
FLC
O90
53
FLC
O90
54
FLC
O90
48
2/25ABB SACE
2
IP 40 wall-mounting consumer unitsUnibox Series
36 modules 54 modules
Code Colour Dimensions (mm) Box/packWxHxD No items
12 216 white 295x515x115 1/312 236 grey 295x515x115 1/3
Code Colour Dimensions (mm) Box/packWxHxD No items
12 246 white 295x515x115 1/312 256 grey 295x515x115 1/3
Code Colour Dimensions (mm) Box/packWxHxD No items
12 266 white 295x515x115 1/312 276 grey 295x515x115 1/3
Code Colour Dimensions (mm) Box/packWxHxD No items
12 217 white 405x515x115 1/112 237 grey 405x515x115 1/1
Code Colour Dimensions (mm) Box/packWxHxD No items
12 247 white 405x515x115 1/112 257 grey 405x515x115 1/1
Code Colour Dimensions (mm) Box/packWxHxD No items
12 267 white 405x515x115 1/112 277 grey 405x515x115 1/1
Without door
RAL 9016 white / RAL 7035 grey
With transparent, smoky vertically hinged door
RAL 9016 white / RAL 7035 grey
With opaque, vertically hinged door
RAL 9016 white / RAL 7035 grey
FLC
O90
47
FLC
O90
51
FLC
O90
57
FLC
O90
61
FLC
O90
55
FLC
O90
56
2/26 ABB SACE
2
IP 40 wall-mounting consumer unitsAccessories for Unibox Series
Terminal-holders
Code Description For consumer units Box/packtype No items
12 540 for 8 modules 12 208 – 12 228 – 12 238 12/14412 248 – 12 258 – 12 268
12 541 for 12 modules 12 212 – 12 232 – 12 242 12/144per row 12 252 – 12 262 – 12 272
12 214 – 12 234 – 12 24412 254 – 12 264 – 12 27412 216 – 12 236 – 12 24612 256 – 12 266 – 12 276
12 542 for 18 modules 12 217 – 12 237 – 12 247 12/108per row 12 257 – 12 267 – 12 277
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separated from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well as personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
FLC
O92
27
FLC
O92
26
Terminal blocks
Box/packCode Description No items12 492 for 8 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 495 for 12 modules – composed of 12541x1 + 12532x2 10/4012 504 for 24 modules – composed of 12541x2 + 12531x2 + 12533x2 10/4012 505 for 36 modules – composed of 12541x2 + 12531x2 + 12524x2 10/4012 501 for 54 modules – composed of 12542x2 + 12535x2 5/20
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
13F
0001
2/27ABB SACE
2
IP 40 wall-mounting consumer unitsAccessories for Unibox Series
Module covers
Spare doors
Code Colour No modules Box/packNo items
1SL2857A00 RAL 9016 white 1 50/15001SL2859A00 RAL 9016 white 4 50/60012 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Opaquewhite grey For consumer units Box/packRAL 9016 RAL 7035 type No items12 511 12 516 12 238 – 12 248 1/2512 512 12 517 12 242 – 12 252 1/1512 513 12 518 12 244 – 12 254 1/1012 514 12 519 12 246 – 12 256 1/512 515 12 520 12 247 – 12 257 1/5
Transparent smoky For consumer units Box/packtype No items
12 521 12 258 – 12 268 1/2512 522 12 262 – 12 272 1/1512 523 12 264 – 12 274 1/1012 524 12 266 – 12 276 1/512 525 12 267 – 12 277 1/5
The mechanism for push-pull code No 12 526 (in packs of 5 items) should bealways ordered with each door.
Lock with key
Code Description Box/packNo items
12 530 coded type 20/300
Coupling element
Code Box/packNo items
12 556 10/100
Cable-clip accessory
Code Box/packNo items
12 550 1/30
FLC
O92
77F
LCO
9118
FLC
O92
74
FLC
O92
78
FLC
O91
21
Not available for consumer units with 8 modules
FLC
O98
03
Residential/tertiary application
2/29ABB SACE
2
IP 40 wall-mounting consumer unitsEuropa Series
Technical characteristics• protection degree IP 40
• insulation class II• available in 3 versions: without door, with opaque door and
with transparent, smoky door with vertical hinge• available in the following material:
- RAL 9016 white and RAL 7035 grey thermoplastic, self-extinguishing and resistant to abnormal heat and fire up to650 °C (glow wire test) in compliance with IEC 60695-2-1Standard
• resistant to chemical agents (water, saline solutions, acids,mineral bases and oils), atmospheric agents and UV rays
• operating temperature from -20 °C to +85 °C• shock resistance 6 Joules• symmetrical, reversible door to open on either sides, designed
to be fitted with a coded lock code 12 864• front part designed for input of cable trunking measuring up to
200x60 mm; possibility of branch connection with conduitthanks to a flange included in the supply
• consumer units designed with roomy interiors to make cablingeasy and tidy
• devices with a depth of 53 and 68 mm can be installed onswitchboxes with 8,12, 24 modules and devices with a depthof up to 75 mm on consumer units with 36-54 modules
• all models designed for the use of the UNIFIX SL fast-cabling system
• consumer units manufactured in compliance with CEI 23-48,CEI 23-49 and IEC 60 670 Standards
• consumer units are supplied complete with:- 1 rigid flange for branch connection with conduit- 4 module covers per row- 1 self-adhesive label per row- 1 plate for CEI 23-51 certification- instruction sheet
Accessories ........................................ page 2/32 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/10
FLC
O92
89
IP 40 Europa Series wall-mountingconsumer units obtained the IMQmark of approval
IMQ mark
2/30 ABB SACE
2
IP 40 wall-mounting consumer unitsEuropa Series
8 modules 12 modules 24 modules
Without door
RAL 9016 white / RAL 7035 grey
With transparent, smoky vertically hinged door
RAL 9016 white / RAL 7035 grey
With opaque, vertically hinged door
RAL 9016 white / RAL 7035 grey
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2408A00 white 230x200x95 1/1212 428 grey 230x200x95 1/12
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2438A00 white 230x200x95 1/1212 448 grey 230x200x95 1/12
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2458A00 white 230x200x95 1/1212 468 grey 230x200x95 1/12
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2412A00 white 305x200x95 1/1012 432 grey 305x200x95 1/10
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2442A00 white 305x200x95 1/1012 452 grey 305x200x95 1/10
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2462A00 white 305x200x95 1/1012 472 grey 305x200x95 1/10
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2414A00 white 305x350x95 1/612 434 grey 305x350x95 1/6
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2444A00 white 305x350x95 1/612 454 grey 305x350x95 1/6
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2464A00 white 305x350x95 1/612 474 grey 305x350x95 1/6
FLC
O90
32
FLC
O90
33
FLC
O90
34
FLC
O90
37
FLC
O90
38
FLC
O90
39F
LCO
9044
FLC
O90
43
FLC
O90
42
2/31ABB SACE
2
IP 40 wall-mounting consumer unitsEuropa Series
36 modules 54 modules
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2416A00 white 305x500x120 1/312 436 grey 305x500x120 1/3
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2446A00 white 305x500x120 1/312 456 grey 305x500x120 1/3
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2466A00 white 305x500x120 1/312 476 grey 305x500x120 1/3
Without door
RAL 9016 white / RAL 7035 grey
With transparent, smoky vertically hinged door
RAL 9016 white / RAL 7035 grey
With opaque, vertically hinged door
RAL 9016 white / RAL 7035 grey
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2417A00 white 380x570x120 1/212 437 grey 380x570x120 1/2
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2447A00 white 380x570x120 1/212 457 grey 380x570x120 1/2
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2467A00 white 380x570x120 1/212 477 grey 380x570x120 1/2
FLC
O90
35
FLC
O90
36
FLC
O90
40
FLC
O90
41F
LCO
9046
FLC
O90
45
2/32 ABB SACE
2
IP 40 wall-mounting consumer unitsAccessories for Europa Series
Terminal holders
Code Description For consumer units Box/packtype No items
12 540 for 8 modules 1SL2408A00 – 12 428 – 1SL2438A00 12/14412 448 – 1SL2458A00 – 12 468
12 541 for 12 modules 1SL2412A00 – 12 432 – 1SL2442A00 12/144per row 12 452 – 1SL2462A00 – 12 472
1SL2414A00 – 12 434 – 1SL2444A0012 454 – 1SL2464A00 – 12 474
1SL2416A00 – 12 436 – 1SL2446A0012 456 – 1SL2466A00 – 12 476
12 542 for 18 modules 1SL2417A00 – 12 437 – 1SL2447A00 12/108per row 12 457 – 1SL2467A00 – 12 477
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separated from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block d that is cheap as well as personalised, due to the fact that you only need to use material thatis really necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
FLC
O92
27
FLC
O92
26
Terminal blocks
Box/packCode Description No items12 492 for 8 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 495 for 12 modules – composed of 12541x1 + 12532x2 10/4012 504 for 24 modules – composed of 12541x2 + 12531x2 + 12533x2 10/4012 505 for 36 modules – composed of 12541x2 + 12531x2 + 12524x2 10/4012 497 for 54 modules – composed of 12543x2 + 12535x2 10/40
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
13F
0001
2/33ABB SACE
2
IP 40 wall-mounting consumer unitsAccessories for Europa Series
Module covers
Spare doors
Code Colour No modules Box/packNo items
1SL2857A00 RAL 9016 white 1 50/15001SL2859A00 RAL 9016 white 4 50/60012 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Opaquewhite grey For consumer units Box/packRAL 9016 RAL 7035 type No items1SL2078A00 12 070 1SL2438A00 – 12 448 1/501SL2079A00 12 071 1SL2442A00 – 12 452 1/501SL2080A00 12 072 1SL2444A00 – 12 454 1/251SL2081A00 12 073 1SL2446A00 – 12 456 1/101SL2095A00 12 094 1SL2447A00 – 12 457 1/10
Transparent smokyFor consumer units Box/pack
type No items12 074 1SL2458A00 – 12 468 1/5012 075 1SL2462A00 – 12 472 1/5012 076 1SL2464A00 – 12 474 1/2512 077 1SL2466A00 – 12 476 1/2012 096 1SL2467A00 – 12 477 1/10
Screw lead sealing accessory
Lock with key
Code Description Box/packNo items
12 864 coded type 10/300
Code Box/packNo items
12 860 50/1500
FLC
O92
34
FLC
O92
28
FLC
O92
33
1SLC
0010
14F
0001
FLC
O98
07
Residential/tertiary applications
2/35ABB SACE
2
Technical characteristics• protection degree IP 40
• insulation class II• available in self-extinguishing polycarbonate resistant to
abnormal heat and fire up to 960 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• available in RAL 7035 grey• material with low halogen content• operating temperature from -25 °C to +115 °C• shock resistance 20 Joules (IK level 10)• high resistance to UV rays• extractable DIN rail frame to facilitate bench cabling. It can
also be dismantled (and snapped on to reassemble it) tomake it easier to cable the individual wires
• possibility of installing devices with depth of 53, 68 and 75 mm
• possibility of installation in environments with major risk in theevent of a fire (ECI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 IV edition Standard)
• models with 8 modules and more fitted with one rigid andone bi-material flange for facilitate input of conduits andcables
• models with 8 modules and more designed for the use ofthe UNIFIX L fast-cabling system
• consumer units manufactured in compliance with CEI 23-48,CEI 23-49 and IEC 60 670 Standards
• consumer units are supplied complete with:- 4 module covers per row- 1 self-adhesive label per row- 1 plate for CEI 23-51 certification
- 4 screw-cover caps for guarantee - instruction sheet
Accessories ........................................ page 2/38 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/12
FLC
O99
35
IP40 Europa Polycarbonate Serieswall-mounting consumer unitsobtained the IMQ mark of approval
IMQ mark
IP 40 wall-mounting consumer unitsEuropa Polycarbonate Series
2/36 ABB SACE
2
IP 40 wall-mounting consumer unitsEuropa Polycarbonate Series
2-4 modules
Without door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 702 100x160x85 1/36
4 modules 8 modules 12 modules
Code Dimensions (mm) Box/packWxHxD No items
12 704 140x220x110 1/19
Code Dimensions (mm) Box/packWxHxD No items
12 708 205x220x110 1/9
Code Dimensions (mm) Box/packWxHxD No items
12 712 275x220x110 1/7
FLC
O90
65
FLC
O90
62
FLC
O90
63
FLC
O90
64
2/37ABB SACE
2
IP 40 wall-mounting consumer unitsEuropa Polycarbonate Series
24 modules 36 modules 54 modules
Without door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 714 275x370x110 1/5
Code Dimensions (mm) Box/packWxHxD No items
12 716 275x570x110 1/3
Code Dimensions (mm) Box/packWxHxD No items
12 718 380x570x120 1/2
FLC
O90
67
FLC
O90
66
FLC
O90
68
2/38 ABB SACE
2
IP 40 wall-mounting consumer unitsAccessories for Europa Polycarbonate Series
Terminal holders
Code Description For consumer units Box/packtype No items
12 538 for 4 modules 12 704 12/36012 539 for 8 modules 12 708 12/36012 540 for 12 modules per row 12 712 –12 714 –12 716 12/14412 543 for 18 modules per row 12 718 12/144
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separated from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well as personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
FLC
O92
27
FLC
O92
26
Terminal blocks
Box/packCode Description No items12 490 for 4 modules – composed of 12538x2 + 12531x2 10/6012 491 for 8 modules – composed of 12539x2 + 12531x2 10/6012 492 for 12 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 494 for 24 modules – composed of 12540x2 + 12533x2 10/4012 493 for 36 modules (3 rows) – composed of 12540x2 + 12534x2 10/4012 497 for 54 modules – composed of 12543x2 + 12535x2 10/40
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
13F
0001
2/39ABB SACE
2
IP 40 wall-mounting consumer unitsAccessories for Europa Polycarbonate Series
Module covers
Semi-flush-mounting frames
Code Colour No modules Box/packNo items
12 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Code For consumer units Box/packtype No items
12 590 12 704 5/2012 591 12 708 5/2012 592 12 712 5/2012 593 12 714 5/2012 594 12 716 5/512 595 12 718 5/5
Screw lead sealing accessory
Code Box/packNo items
12 860 50/1500
Wall brackets
Code Description Box/packNo items
12 858 in insulating material 20/240
Spare flanges
Code For consumer units Box/packwith No items
12 600 8 modules, bi-material 30/12012 601 12, 24, 36 (12x3 rows) modules, bi-material 20/8012 602 54 modules, bi-material 20/801SL0550A00 rigid flange 8 modules per row 30/1201SL0551A00 rigid flange 12 modules per row 20/801SL0552A00 rigid flange 18 modules per row 20/80
FLC
O92
38
FLC
O92
35F
LCO
9236
FLC
O92
37
1SLC
0010
14F
0001
1SLC
0010
17F
0001
FLC
O98
62
Residential/tertiary applications
2/41ABB SACE
2
Technical characteristics• protection degree IP 40
• insulation class II• available in material:
- thermoplastic RAL 9016 white and RAL 7035 grey self-extinguishing and resistant to abnormal heat and fire up to650 °C (glow wire test) in compliance with IEC 60695-2-1Standard
• resistant to chemical agents (water, saline solutions, acids.mineral bases and oils), to atmospheric agents and UV rays
• operating temperature from -20 °C to +85 °C
• shock resistance 6 Joules• covers produced in compliance with CEI 23-48, CEI 23-49
and IEC 60 670 Standards
Accessories ........................................ page 2/43 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/14
FLC
O99
20
IP 40 wall-mounting covers unitsobtained the IMQ mark of approval
IMQ mark
IP 40 wall-mounting consumer unitsWall-mounting covers
2/42 ABB SACE
2
IP 40 wall-mounting consumer unitsWall-mounting covers
2 modules
Without door
RAL 9016 white - RAL 7035 grey
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2402A00 white 50x140x65 1/4512 422 grey 50x140x65 1/45
4 modules 6 modules
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2404A00 white 95x160x65 1/2012 424 grey 95x160x65 1/20
Code Colour Dimensions (mm) Box/packWxHxD No items
1SL2406A00 white 140x160x65 1/1212 426 grey 140x160x65 1/12
FLC
O90
29
FLC
O90
30
FLC
O90
30
2/43ABB SACE
2
IP 40 wall-mounting consumer unitsAccessories for wall-mounting covers
Terminal bars
Code Description For covers Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm)type No items
12 502 2x4.5 + 3x5.6 12 404 –12 406 25/75012 424 –12 426
The terminal bar can be fixed to covers using the supplied screws.
Module covers
Code Colour No modules Box/packNo items
1SL2857A00 RAL 9016 white 1 50/15001SL2859A00 RAL 9016 white 4 50/60012 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Screw lead sealing accessory
Code Box/packNo items
12 860 50/1500
FLC
O92
38
FLC
O92
90
1SLC
0010
14F
0001
FLC
O98
06
Residential/tertiary application
2/45ABB SACE
2
Technical characteristics• protection degree IP 55
• insulation class II• available with transparent, smoky horizontally hinged door in
the version with sealable spring closure and with key lock• available in RAL 7035 grey• available in thermoplastic self-extinguishing material resistant
to abnormal heat and fire up to 650 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• resistant to chemical agents (water, saline solutions, acids.mineral bases and oils), to atmospheric agents and UV rays
• operating temperature from -20 °C to +85 °C• shock resistance 6 Joules
• possibility of installation in environments with major risk in theevent of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• 10 and 20 module consumer units can be attached to the wallwith brackets code 12 858
• consumer units made and produced in compliance with CEI23-48, CEI 23-49 and IEC 60 670 Standards
• consumer units are supplied complete with:- 4 module covers per row- 1 self-adhesive label per row- 3 25 mm cable glands- 1 plate for CEI 23-51 certification
Accessories ........................................ page 2/48 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/16
FLC
O99
36
IP 55 wall-mounting consumer unitsIP 55 Europa Series
2/46 ABB SACE
2
4 modules
Spring closing
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 644 125x180x105 1/18
IP 55 wall-mounting consumer unitsIP 55 Europa Series
6 modules
Code Dimensions (mm) Box/packWxHxD No items
12 646 160x180x105 1/12
10 modules
Code Dimensions (mm) Box/packWxHxD No items
12 650 230x180x105 1/10
4 modules
Key lock
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 684 125x180x105 1/18
6 modules 10 modules
Code Dimensions (mm) Box/packWxHxD No items
12 690 230x180x105 1/10
Code Dimensions (mm) Box/packWxHxD No items
12 686 160x180x105 1/12
FLC
O90
77
FLC
O90
78
FLC
O90
79
FLC
O90
81
FLC
O90
82
FLC
O90
83
2/47ABB SACE
2
IP 55 wall-mounting consumer unitsIP 55 Europa Series
10 special modules
Spring closing
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 654 250x320x139 1/6
20 modules
Code Dimensions (mm) Box/packWxHxD No items
12 652 250x320x139 1/6
Key lock
RAL 7035 grey
20 modules
Code Dimensions (mm) Box/packWxHxD No items
12 692 250x320x139 1/6
FLC
O90
88
FLC
O90
80F
LCO
9084
2/48 ABB SACE
2
IP 55 wall-mounting consumer unitsAccessories for IP 55 Europa Series
Terminal blocks
Code Description For consumer units Box/packNeutral terminal blocks Earth terminal blocks type No items
No of holes x Ø holes (mm) + No of holes x Ø holes (mm) No of holes x Ø holes (mm) + No of holes x Ø holes (mm)
12 880 2x4.5 + 3x5.6 2x4.5 + 3x5.6 12 644 –12 684 10/6012 882 6x4.5 + 5x5.6 2x4.5 + 3x5.6 12 646 –12 686 10/6012 884 6x4.5 + 5x5.6 2x4.5 + 3x5.6 12 650 –12 690 10/4012 886 2 (6x4.5 + 5x5.6) 2 (2x4.5 + 3x5.6) 12 652 –12 692 –12 654 10/40
Module covers
Code Colour No modules Box/packNo items
12 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Wall brackets
Code Description For consumer units with Box/packNo items
12 858 in insulating material 8,10 modules 20/240
FLC
O92
42
FLC
O91
08
FLC
O92
28
FLC
O92
35
2/49ABB SACE
2
IP 55 wall-mounting consumer unitsAccessories for IP 55 Europa Series
Lock with key
Code Description Box/packNo items
12 865 coded type 10/300
Spare transparent smoky door
Code For consumer units type Box/packNo items
12 696 12 644 – 12 684 10/4012 697 12 646 – 12 686 10/4012 698 12 650 – 12 690 10/20
12 652 – 12 692 – 12 654
FLC
O92
43
FLC
O92
44
Spring closing
FLC
O98
05
Residential/tertiary/industrial application
2/51ABB SACE
2
IP 65 wall-mounting consumer unitsIP 65 Fly Polycarbonate Series
Technical characteristics• protection degree IP 65
• insulation class II• consumer units fitted with transparent, smoky horizontally
hinged doors for each row of devices, designed to befitted with coded lock and key, code 12 866
• available in RAL 7035 grey• in polycarbonate, self-extinguishing and resistant to
abnormal heat and fire up to 960 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• material with low halogen content• operating temperature from -25 °C to +115 °C• shock resistance 20 Joules (IK level 10)• high resistance to UV rays• extractable DIN rail frame to facilitate bench cabling. It can
also be dismantled (and snapped on to reassemble it) tomake it easier to cable the individual wires
• possibility of installing devices with depths of 53, 68 and 75 mm• possibility of installation in environments with major risk in
the event of fire (CEI 64-8 part 7 section 751 Standard) andin AD-FT environments (CEI 64-2 Standard, IV edition)
• models with 8 modules and more fitted with one rigid andone bi-material flange for facilitated input of conduits andcables
• models with 8 modules and more designed to be used withrapid UNIFIX L cabling system
• consumer units made and produced in compliance with CEI23-48, CEI 23-49 and IEC 60 670 Standards
• consumer units are supplied complete with:- 4 module covers per row- 1 self-adhesive label per row
- 4 screw cover caps for guarantee - 1 plate for CEI 23-51 certification- instruction sheet
Accessories ........................................ page 2/54 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/18
IMQ mark
IP 65 Polycarbonate Fly Seriesconsumer units obtained the IMQmark of approval
1SLC
0010
18F
0001
2/52 ABB SACE
2
IP 65 wall-mounting consumer unitsIP 65 Fly Polycarbonate Series
With transparent, horizontally hinged door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 742 100x160x100 1/3312 722(*) 100x160x100 1/33
(*) Version with opaque door.
2-4 modules 8 modules 12 modules
Code Dimensions (mm) Box/packWxHxD No items
12 743 205x220x140 1/8
Code Dimensions (mm) Box/packWxHxD No items
12 745 275x220x140 1/6
FLC
O90
73
FLC
O90
74
FLC
O90
72
2/53ABB SACE
2
IP 65 wall-mounting consumer unitsIP 65 Fly Polycarbonate Series
With transparent, horizontally hinged door
RAL 7035 grey
24 modules 36 modules
Code Dimensions (mm) Box/packWxHxD No items
12 746 275x370x140 1/4
Code Dimensions (mm) Box/packWxHxD No items
12 747 275x570x140 1/2
FLC
O90
75
FLC
O90
76
2/54 ABB SACE
2
IP 65 wall-mounting consumer unitsAccessories for IP 65 Fly Polycarbonate Series
Terminal holders
Code Description For consumer units Box/packtype No items
12 539 for 8 modules 12 743 12/14412 540 for 12 modules per row 12 745 –12 746 –12 747 12/144
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separated from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well as personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit given in the technical details.
FLC
O92
27
FLC
O92
26
Terminal blocks
Box/packCode Description No items12 491 for 8 modules – composed of 12539x2 + 12531x2 10/6012 492 for 12 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 494 for 24 modules – composed of 12540x2 + 12533x2 10/4012 493 for 36 modules (3 rows) – composed of 12540x2 + 12534x2 10/40
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
13F
0001
2/55ABB SACE
2
IP 65 wall-mounting consumer unitsAccessories for IP 65 Fly Polycarbonate Series
Module covers
Semi-flush-mounting frames
Code Colour No modules Box/packNo items
12 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Code For consumer units Box/packtype No items
12 591 12 743 5/2012 592 12 745 5/2012 593 12 746 5/2012 594 12 747 5/5
Screw lead sealing accessories
Code Box/packNo items
12 860 50/1500
Plastic wall brackets
Code Description Box/packNo items
12 858 in insulating material 20/240
Spare flanges
Lock with key
Code Description Box/packNo items
12 866 coded type 10/300
FLC
O92
28
FLC
O92
35F
LCO
9236
FLC
O92
93
FLC
O92
40
Spare doors
Code Description For consumer units Box/packtype No items
12 567 opaque RAL 7035 grey for 2 mod. 12 722 10/6012 577 transparent for 2 mod. 12 742 10/6012 565 transparent for 8 mod. 12 743 10/6012 566 transparent for 12, 24, 36 12 745 –12 746 8/16
(12x3 rows) mod. 12 747
FLC
O92
41
Code For consumer units Box/packtype No items
12 600 8 modules, bi-material 30/12012 601 12, 24, 36 (12x3 rows) modules, bi-material 20/801SL0550A00 rigid flange, 8 modules per row 30/1201SL0551A00 rigid flange, 12 modules per row 20/801SL0552A00 rigid flange, 18 modules per row 20/80
1SLC
0010
14F
0001
1SLC
0010
17F
0001
FLC
O98
04
Residential/tertiary/industrial application
2/57ABB SACE
2
IP 65 wall-mounting consumer unitsIP 65 Europa Polycarbonate Series
Technical characteristics• protection degree IP 65
• insulation class II• available in two versions: with opaque door and with transpa-
rent, smoky vertically hinged door• available in RAL 7035 grey• in polycarbonate, self-extinguishing and resistant to abnormal
heat and fire up to 960 °C (glow wire test) in compliance withIEC 60695-2-1 Standard
• material with low halogen content• operating temperature from -25 °C to +115 °C• shock resistance 20 Joules (IK level 10)• high resistance to UV rays• door designed to be fitted with coded lock and key, code 12 866• extractable DIN rail frame to facilitate bench cabling. It can
also be dismantled (and snapped on to reassemble it) tomake it easier to cable the individual wires
• possibility of installing devices with depths of 53, 68 and 75 mm• perfectly symmetrical consumer units with the possibility of
attaching the door hinge onto the front (by means of thespecial articulated screws supplied) on the right or left with140° opening
• possibility of installation in environments with major risk in theevent of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• models with 8 modules and more designed to be used withthe UNIFIX L cabling system
• models with 8 modules and more fitted with one rigid andone bi-material flange to facilitate input of conduits andcables
• consumer units made and produced in compliance with CEI23-48, CEI 23-49 and IEC 60 670 Standards
• consumer units are supplied complete with:- 4 module covers per row- 1 self-adhesive label per row
- 4 screw-cover caps to guarantee - accessories for attaching the hinges to the front- 1 plate for CEI 23-51 certification- instruction sheet
Accessories ........................................ page 2/60 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/20
IMQ mark
IP 65 Europa Polycarbonate Series wall-mounting consumer units obtained theIMQ mark of approval
1SLC
0010
20F
0001
2/58 ABB SACE
2
4 modules
With opaque, vertically hinged door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 724 140x220x140 1/14
IP 65 wall-mounting consumer unitsIP 65 Europa Polycarbonate Series
8 modules 12 modules 18 modules
With transparent, smoky vertically hinged door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 744 140x220x140 1/14
Code Dimensions (mm) Box/packWxHxD No items
12 728 205x220x140 1/9
Code Dimensions (mm) Box/packWxHxD No items
12 748 205x220x140 1/9
Code Dimensions (mm) Box/packWxHxD No items
12 732 275x220x140 1/6
Code Dimensions (mm) Box/packWxHxD No items
12 752 275x220x140 1/6
Code Dimensions (mm) Box/packWxHxD No items
12 733 380x220x140 1/5
Code Dimensions (mm) Box/packWxHxD No items
12 753 380x220x140 1/5
FLC
O90
89
FLC
O90
90
FLC
O90
91
FLC
O90
92
FLC
O90
97
FLC
O90
98
FLC
O90
99
FLC
O91
00
2/59ABB SACE
2
IP 65 wall-mounting consumer unitsIP 65 Europa Polycarbonate Series
24 modules 36 modules 36 modules 54 modules
With opaque, vertically hinged door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 734 275x370x140 1/4
With transparent, smoky vertically hinged door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 754 275x370x140 1/4
Code Dimensions (mm) Box/packWxHxD No items
12 735 380x370x140 1/2
Code Dimensions (mm) Box/packWxHxD No items
12 755 380x370x140 1/2
Code Dimensions (mm) Box/packWxHxD No items
12 736 275x570x140 1/2
Code Dimensions (mm) Box/packWxHxD No items
12 756 275x570x140 1/2
Code Dimensions (mm) Box/packWxHxD No items
12 738 380x570x140 1/2
Code Dimensions (mm) Box/packWxHxD No items
12 758 380x570x140 1/2
FLC
O90
93
FLC
O90
94
FLC
O90
95
FLC
O90
96
FLC
O91
01
FLC
O91
02
FLC
O91
03
FLC
O91
04
2/60 ABB SACE
2
IP 65 wall-mounting consumer unitsAccessories for Europa Polycarbonate Series
Terminal holders
Code Description For consumer units Box/packtype No items
12 538 for 4 modules 12 724 –12 744 12/36012 539 for 8 modules 12 728 –12 748 12/36012 540 for 12 modules per row 12 732 –12 752 12/144
12 734 –12 75412 736 –12 756
12 543 for 18 modules per row 12 733 –12 753 12/10812 735 –12 75512 738 –12 758
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separate from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well as personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
FLC
O92
27
FLC
O92
26
Terminal blocks
Box/packCode Description No items12 490 for 4 modules – composed of 12538x2 + 12531x2 10/6012 491 for 8 modules – composed of 12539x2 + 12531x2 10/6012 492 for 12 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 498 for 18 modules – composed of 12543x1 + 12531x1 + 12535x1 10/4012 494 for 24 modules – composed of 12540x2 + 12533x2 10/4012 493 for 36 modules (3 rows) – composed of 12540x2 + 12534x2 10/4012 507 for 36 modules (2 rows) – composed of 12543x2 + 12534x2 10/4012 497 for 54 modules – composed of 12543x2 + 12535x2 10/40
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
13F
0001
2/61ABB SACE
2
IP 65 wall-mounting consumer unitsAccessories for Europa Polycarbonate Series
Module covers
Semi-flush-mounting frames
Code Colour No modules Box/packNo items
12 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Code For consumer units Box/packtype No items
12 590 12 724 –12 744 5/2012 591 12 728 –12 748 5/2012 592 12 732 –12 752 5/2012 593 12 734 –12 754 5/2012 594 12 736 –12 756 5/512 595 12 738 –12 758 5/512 596 12 733 –12 753 5/512 597 12 735 –12 755 5/5
Plastic wall brackets
Code Description Box/packNo items
12 858 in insulating material 20/240
Spare flanges
Lock with key
Code Description Box/packNo items
12 866 coded type 10/300
FLC
O92
28
FLC
O92
35F
LCO
9236
FLC
O92
40
FLC
O92
37
Spare doors
Opaque Transparent For consumer units Box/packRAL 7035 grey smoky type No items12 568 12 578 12 724 –12 744 1/812 569 12 579 12 728 –12 748 1/1012 570 12 580 12 732 –12 752 1/812 571 12 581 12 734 –12 754 1/512 572 12 582 12 736 –12 756 1/1012 573 12 583 12 738 –12 758 1/812 584 12 586 12 733 –12 753 1/2012 585 12 587 12 735 –12 755 1/8
FLC
O92
41
Code For consumer units Box/packtype No items
12 600 8 modules, bi-material 30/12012 601 12, 24, 36 (12x3 rows) modules, bi-material 20/8012 602 18, 36 (18x2 rows), 54 modules, bi-material 20/801SL0550A00 rigid flange, 8 modules per row 30/1201SL0551A00 rigid flange, 12 modules per row 20/801SL0552A00 rigid flange, 18 modules per row 20/80
1SLC
0010
17F
0001
FLC
O98
14
FLC
O98
13
Tertiary/industrial application
2/63ABB SACE
2
Panel frontsIP 40 and IP 55 panel fronts
IP 40 panel fronts
Technical characteristics• protection degree IP 40
• insulation class II• in thermoplastic, self-extinguishing and resistant to abnormal
heat and fire up to 650 °C (glow wire test) in compliance withIEC 60695-2-1 Standard
• available in RAL 7035 grey• resistant to chemical agents (water, saline solutions, acids.
mineral bases and oils), to atmospheric agents and UV rays• operating temperature from -20 °C to +85 °C• fronts are supplied with:
- 4 module covers per row- instruction sheet
IP 55 panel fronts
Technical characteristics• protection degree IP 55
• insulation class II• available with transparent, smoky horizontally hinged door in
the version with lock and lead-sealable spring• door designed to take a lock with coded key code 12 865• available in RAL 7035 grey• in thermoplastic, self-extinguishing and resistant to abnormal
heat and fire up to 650 °C (glow wire test) in compliance withIEC 60695-2-1 Standard
• operating temperature from -20 °C to +85 °C• shock resistance 6 Joules• resistant to chemical agents (water, saline solutions, acids.
mineral bases and oils), to atmospheric agents and UV rays• fronts are supplied with:
- 4 module covers per row- instruction sheet
Accessories ........................................ page 2/65 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/22
FLC
O98
56
2/64 ABB SACE
2
IP 40 and IP 55 panel frontsIP 40 and IP 55 panel fronts
IP 40 panel fronts
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 362 81x90x50 10/40
2 modules 3 modules 4 modules
Code Dimensions (mm) Box/packWxHxD No items
12 363 99x90x50 10/40
Code Dimensions (mm) Box/packWxHxD No items
12 364 117x90x50 6/24
IP 55 panel fronts
RAL 7035 greySpring closing
Code Dimensions (mm) Box/packWxHxD No items
12 658 125x180x34 1/10
4 modules 6 modules 10 modules
Code Dimensions (mm) Box/packWxHxD No items
12 659 160x180x34 1/10
Code Dimensions (mm) Box/packWxHxD No items
12 660 230x180x34 1/7
FLC
O90
69
FLC
O90
70
FLC
O90
71
FLC
O90
85
FLC
O90
86
FLC
O90
87
2/65ABB SACE
2
IP 40 and IP 55 panel frontsAccessories for IP 55 panel fronts
Module covers
Code Colour No modules Box/packNo items
12 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Code For fronts Box/packtype No items
12 696 12 658 10/4012 697 12 659 10/4012 698 12 660 10/20
Spare transparent smoky doors
Lock with key
Code Description Box/packNo items
12 865 coded type 10/300
FLC
O92
28
FLC
O92
44
Spring closing
FLC
O92
43
Emergency consumer units
Index
3/1ABB SACE
3Livorno Series flush and wall-mounting consumer units
Flush-mounting consumer units ..............................................................................................3/3
Wall-mounting consumer units ................................................................................................3/3
Flush and wall-mounting consumer units with emergency button ..........................................3/3
Accessories .............................................................................................................................3/6
FLC
O98
18
Tertiary/industrial application
3/3ABB SACE
Accessorieses ...................................... page 3/6 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/24
3
Emergency consumer unitsLivorno Series flush and wall- mounting consumer units
Livorno Series flush and wall-mounting consumer units
Technical characteristics• protection degree IP40, IP55 or IP65 depending on the
version
• insulation class II• available in the colours RAL3000 red and RAL7035 grey• operating temperature from -20 °C to +85 °C• resistance to chemical (water, saline solutions, acids, mineral
bases and oils) and environmental agents• high resistance to UV rays• possibility of installation in environments with major risk in the
event of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• door front with breakable glass 0.75 Joules (IK level 05)• in thermoplastic material, self-extinguishing and resistant to
abnormal heat and fire up to 650 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• consumer units fitted with lock and coded key• consumer units made and produced in compliance with CEI
23-48, CEI 23-49 and IEC 60 670 Standards• consumer units are supplied complete with:
- 4 module covers per row (for the versions with DIN rail)- 4 screw-cover caps to guarantee the double insulation- 1 certification plate
Livorno Series consumer units with emergency button
Technical characteristics• protection degree IP55• flush and wall-mounting versions• available in colour RAL 3000 red• operating temperature from -20 °C to +85 °C• resistance to chemical (water, saline solutions, acids, mineral
bases and oils) and environmental agents• high resistance to UV rays• possibility of installation in environments with major risk in the
event of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• door front with breakable glass 0.75 Joules (IK level 05)• in thermoplastic material, self-extinguishing and resistant to
abnormal heat and fire up to 650 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• with luminous button, with 1 NO contact + 1 NC contact(2A, 250 V)
• they can be fitted with E10: 12 V incandescence, 24 Vincandescence or 250 V fluorescence
• complete with glass-breaking hammer
- in compliance with EN 60947-5-1 Standard- operational rated voltage: Ue 250 V- utilization category AC 12- operational rated current Ie 2A- rated insulation voltage Ui 250 V- pollution degree: 3- utilization type and data of fuses Legrand 10 A, type gG,
10.3 x 38 mm
FLC
O98
59
FLC
O98
60
IMQ mark
Livorno Series emergency consumerunits with luminous button obtainedthe IMQ mark of approval
3/4 ABB SACE
3
Emergency consumer unitsLivorno Series flush and wall- mounting consumer units
100x100x50 mm
Flush-mounting version
200x245x82 mm
Code Description Box/packNo items
13 144 with DIN rail 1/7x 6 mod.
13 154 with panel 1/7
200x245x82 mm
IP 40RAL 3000 red
IP 40RAL 7035 grey
Code Description Box/packNo items
13 143 with DIN rail 1/7x 6 mod.
13 153 With panel 1/7
100x100x50 mm
Wall-mounting version
205x220x140 mm 205x220x140 mm
IP 55RAL 3000 redWith luminous button (E10-12/24 Vincandescence and 250 Vfluorescence), with 1 NO contact + 1NC contact (2A, 250 V) complete withglass-breaking hammer.
IP 65RAL 3000 redFitted with flanges for facilitatedbranch connections.
Code Description Box/packNo items
13 171 with DIN rail 1/6x 8 mod.
13 175 with panel 1/6
IP 65RAL 7035 greyFitted with flanges for facilitatedbranch connections.
Code Description Box/packNo items
13 170 with DIN rail 1/6x 8 mod.
13 174 with panel 1/6
165x180x110 mm
IP 55RAL 3000 red
Code Description Box/packNo items
13 161 with DIN rail 1/12x 8 mod.
13 165 with panel 1/12
FLC
O92
79
FLC
O92
84
FLC
O91
19
FLC
O92
82
FLC
O92
76
IP 55RAL 3000 redPossibility of installing on flush-mountingenclosure with inter-axis of 83.5 mm.With luminous button (E10 –12/24 Vincandescence and 250 V fluorescence),with 1 NO contact + 1 NC contact (2A,250 V) complete with glass-breakinghammer.
Code Box/packNo items
13 183 1/13
Code Box/packNo items
13 180 1/14
1SLC
0010
22F
0001
1SLC
0010
23F
0001
3/5ABB SACE
3
Emergency consumer unitsLivorno Series flush and wall- mounting consumer units
165x180x110 mm
IP 55RAL 3075 grey
Code Description Box/packNo items
13 160 with DIN rail 1/12x 8 mod.
13 164 With panel 1/12
Wall-mounting version
170x210x110 mm
IP 40RAL 3000 red
Code Description Box/packNo items
13 141 with DIN rail 1/6x 8 mod.
13 151 with panel 1/6
170x210x110 mm
IP 40RAL 3075 grey
Code Description Box/packNo items
13 140 with DIN rail 1/6x 8 mod.
13 150 with panel 1/6
FLC
O92
81
FLC
O91
20
FLC
O92
83
3/6 ABB SACE
3
Emergency consumer unitsAccessories
Box/packCode Description No items13 186 glass-breaking hammer 10/300
Glass-breaking hammer
E10 with emergency button
Box/packCode Description No items13 187 E10 12 V – incandescence 10/12013 188 E10 24 V – incandescence 10/12013 189 E10 250 V – fluorescence 10/120
Spare lid
Box/packCode Description No items13 190 for consumer units fitted with emergency button 10/40
Wall brackets
Box/packCode Description No items12 858 only for IP 65 consumer units in insulating material 20/240
FLC
O92
35
1SLC
0010
24F
0001
1SLC
0010
25F
0001
1SLC
0010
26F
0001
Index
4/1ABB SACE
4
Introduction ..............................................................................................................................4/2
Unifix L .....................................................................................................................................4/4
Unifix SL ..................................................................................................................................4/5
Unifix L system components .................................................................................................... 4/6
Unifix SL system components .................................................................................................. 4/8
Unifix cabling system
4
4/2 ABB SACEABB SACE
Unifix cabling systemIntroduction
Special features
The main feature of Unifix lies with the possibility of combiningdifferent types of circuits (one-phase/three-phase/auxiliary) in asingle module. Pre-wiring can be effected at the workbench andinstalled in the switchboard subsequently, with no limits to the typeor combination of devices which can be installed.
Unifix has adjustable pitch which replaces traditional wiringharnesses which means that circuit-breakers with different polaritiescan be placed in the same row as well as auxiliary modular devices.
Unifix cabling system: the idealcomplement for the ABB consumer units
Unifix is the ABB cabling system which makes the work of installersand switchboard builders easier: with its standard connectors,Unifix effects simple, quick and safe wiring of System pro M mo-dular devices in ABB consumer units.
For this reason, it is the ideal solution for exploiting the fact thatABB products for low voltage applications can be perfectlyintegrated whilst at the same time guaranteeing safety and fullcompliance with Standards.
The system consists of three series H, L and SL. Each one issuitable for specific applications both for the installation of devicesand installation in switchboards. In detail:
- the H series, intended for more demanding applications, is usedfor wiring SACE Isomax S1 and S2 and Tmax T1…T3 moulded-case circuit-breakers and System pro M modular devices in ArTu®
switchboards (rated currents up to 400A and short-circuitcurrents up to 50kA);
The Unifix cabling system can be used with ABB SACE devices only.
- the L series is the universal solution for wiring System pro Mmodular devices in ArTu® switchboards and polycarbonateconsumer units (rated currents up to 100A and short-circuitcurrents up to 25kA);
- the SL series is the ideal easy and cheap solution for wiringbipolar modular devices in consumer units (rated currents upto 40A and short-circuit currents up to 10kA).
WE
UN
9017
WE
UN
9018
4/3ABB SACE
4
ABB SACE
Unifix cabling systemIntroduction
ONE SYSTEM, MANY ADVANTAGES
Greater standardization of low voltage switchboards andconsumer units: the rigid connectors enable the results of thetype tests (overheating and short-circuit) effected by ABB to beextended also on input wiring of devices.
Considerable reduction in wiring times: by using rigid lock con-nectors which are standardized for the different types of device,each device does not have to be connected using cables.
A more advanced and, at the same time, cheaper technicalsolution compared with traditional wiring. This is made possibleby cutting down on materials (wires and wire terminals) and spacerequired, thus affecting operating times.
Can be used on all ABB standard devices, without modifying oradding accessories and without using special equipment.
Adjustable pitch: Unifix uses adjustable pitch unlike traditional wir-ing harnesses; in this way, circuit-breakers with different polarity canbe placed in the same row as well as auxiliary devices.
4
4/4 ABB SACEABB SACE
Unifix cabling systemUnifix L
Unifix L: the universal solution forswitchboards and consumer units
With its special features, the Unifix L version is extremely versatilein its use and meets the demands of installations which vary agreat deal with regard to function and size.Unifix L is suitable forwiring System pro M modular devices in ArTu® switchboards andABB polycarbonate consumer units, for rated currents up to 100Aand short-circuit currents up to 25kA. The devices are suppliedtop-down by way of special standard rigid connectors.
TECHNICAL CHARACTERISTICSBusbarsThe busbars consist of a support which contains a system of 100Acapacity conductors (central supply) and 25kA short-circuit current(conditioned). They are available in two-pole and four-pole versionsfor widths of 12, 18, 24 or 36 modules which can be installed inthe ArTu switchboards with widths of 400, 600 and 800mmrespectively (18 modules excluded). Fixing is carried out by dove-tailing on the rear of the DIN rail and installation is in two moduleswith H=200mm.The busbar system is structured in such a way that it is possible toattach special supports for ducts with max. dimensions 60x80mmon the rear.
Power supply module with cableThe 63A power supply module can be inserted directly in the busbarconductors in the two-pole and four-pole versions. Its dimensionsare equivalent to two base modules (17.5 mm) and direct supplythe busbars when there is no main circuit-breaker in the row.The four-pole version, with a cross-section of 16mm2, is suppliedwith the following cable lengths:- 400 mm;- 600 mm;- 800 mm;- 1500 mm;- 2500 mm.
Power supply module without cableThe one-pole 100A supplier module in the L1, L2, L3, N versionsis directly inserted in the busbar conductors. Its dimensions areequivalent to a base module (17.5 mm) and it directly supplies thebusbars when there is no main circuit-breaker in the row. It isequipped with a terminal which enables connection of a conductorwith a cross-section of 35mm2.
Connections for devicesThe connections consist of insulated copper busbars, cut and bentto size. They supply each terminal of the System pro M modulardevices and the busbar system. The connections are suppliedaccording to the polarity of the device which must be wired(connectors are available for L1, L2, L3, N and in the version for1P + N devices in a DIN module). Supports with a cable are alsoavailable for supplying auxiliary devices so that devices on the samerow can be wired to the modular circuit-breakers.
WE
UN
9037
WE
UN
9038
WE
UN
9039
WE
UN
9040
WE
UN
9035
4/5ABB SACE
4
ABB SACE
Unifix cabling systemUnifix SL
Unifix SL: simple and cheap, ideal for smallapplications
Unifix SL is a simplified cheaper version of the L version for wiringSystem pro M bipolar modular devices in all ABB consumer unitswith rated currents up to 40A and short-circuit currents up to 10kA.Unifix SL, which has all the advantages of the L version (adjustablepitch, standard connectors etc.), is the ideal solution for domesticconsumer units and other similar consumer units. Its structure isextremely compact since the bases are only bipolar. As a result, ittakes up very little space and is easily installed even in the smallestof consumer units. The devices are always supplied top-down.The three elements in the SL version system, like the L version, arethe busbars, the supply terminals and the rigid connectors and
supports with cables for the system pro M modular devices.A simple DIN rail which is supplied with the consumer units mustbe used.
TECHNICAL CHARACTERISTICS
BusbarsThe busbars consist of a support, containing a system of horizontalcopper ducts. They are only available in the bipolar version (L1+N)and lengths of 8, 12 and 18 modules. They are mounted in thespecial housing supplied in all ABB consumer units for the wall-mounting type and with the relative supports for the flush-mountingversion.
Standard connections for supplying devicesThe connections consist of insulated copper busbars, cut and bentto size. They supply each terminal of the System pro M modularcircuit-breakers and the system of ducts in the busbars. One endis dove-tailed on the ducts in the busbar whereas the other end isattached to the circuit-breaker terminal. The connections aresupplied in L1, N polarity and in the version for 1P + N devices ina DIN module. Supports with a cable are also available to supplyauxiliary devices and connect these devices on the same row withthe modular circuit-breakers.
WE
UN
9051
WE
UN
9049
WE
UN
9050
1SLC
8010
12F
1001
4
4/6 ABB SACEABB SACE
Unifix cabling systemUnifix L system components
N L
2 poli
ED....
ED3124
ED3066
ED3041ED3058ED3033
ED3132ED0026ED0025
35015002500
4 poliN L1 L2 L3
VT
QD
0138
Code Description Pck./Pieces
2-pole busbarsED2985 Busbars 100A 2P 8 modules 1/6ED2993 Busbars 100A 2P 12 modules (W=400 mm) 1/6ED3009 Busbars 100A 2P 18 modules 1/6ED3017 Busbars 100A 2P 24 modules (W=600 mm) 1/6ED3025 Busbars 100A 2P 36 modules (W=800 mm) 1/6
4-pole busbarsED2944 Busbars 100A 4P 12 modules (W=400 mm) 1/6ED2951 Busbars 100A 4P 18 modules 1/6ED2969 Busbars 100A 4P 24 modules (W=600 mm) 1/6ED2977 Busbars 100A 4P 36 modules (W=800 mm) 1/6
Connections for different devicesED3108 Connection with 2 cables L/N 16A 1/6ED3116 Connection with 3 cables L1/L2/L3 16A 1/6ED3124 Connection with 4 cables L1/L2/L3/N 16A 1/6
ED3355 Connection with 2 cables L1/N 40A 1/6ED3363 Connection with 3 cables L1/L2/L3 40A 1/6ED3371 Connection with 4 cables L1/L2/L3/N 40A 1/6
Connection for devicesED3272 10 connection L1-N 40 A 1/10ED3280 10 connection L2-N 40 A 1/10ED3298 10 connection L3-N 40 A 1/10
ED3033 10 connection L 1 100A 1/10ED3041 10 connection L 2 100A 1/10ED3058 10 connection L 3 100A 1/10ED3066 10 connection N 100A 1/10
ED3132 Power supplies with cable 4P 100A (W=350 mm) 1/6ED0026 Power supplies with cable 4P 100A (W=1500 mm) 1/6ED0025 Power supplies with cable 4P 100A (W=2500 mm) 1/6
4/7ABB SACE
4
ABB SACE
Unifix cabling systemUnifix L system components
Code Description Pck./Pieces
ED3104
ED3103
ED3102
ED3101
4006008001500
ED3090ED3405ED3413ED3439
Power supply modules with cableED3082 Supply modules 2P 100A with cable W=600mm 1/6
ED3405 Supply modules 4P 100A with cable W=400mm 1/6ED3090 Supply modules 4P 100A with cable W=600mm 1/6ED3413 Supply modules 4P 100A with cable W=800mm 1/6ED3439 Supply modules 4P 100A with cable W=1500mm 1/6
Power supply modules without cable In 100AED3101 10 one-pole supply modules L 1 1/10ED3102 10 one-pole supply modules L 2 1/10ED3103 10 one-pole supply modules L 3 1/10ED3104 10 one-pole supply modules N 1/10
VT
QD
0138
/bis
4
4/8 ABB SACEABB SACE
Unifix cabling systemUnifix SL system components
Code Type Description Pck./Pieces
ED3157 XUSLT08 USL busbar 2P 8 modules 6ED3165 XUSLT12 USL busbar 2P 12 modules 6ED3173 XUSLT18 USL busbar 2P 18 modules 6ED3249 XUSLT08+1 USL busbar 2P 8+1 modules 6ED3256 XUSLT12+1 USL busbar 2P 12+1 modules 6ED3264 XUSLT18+1 USL busbar 2P 18+1 modules 6ED3181 XUSL1V USL USL set connections L1 (10 pieces 6ED3199 XUSLNV USL USL set connections N (10 pieces) 6ED3207 XUSL1NT USL USL set connections L1N (10 pieces) 6ED3330 XUSLP1NR USL USL set connections L1N for S9..1N (10 pieces) 6ED3215 XUSLPP Parallel supplier 2P 40A 6ED3223 XUSLX Support with 2 cables 16A for aux. 6
BUSBAR
CONNECTIONS
Switchboards
Index
5/1ABB SACE
5
Switchboards for industrial applications
Europa Series switchboards for industrial applications ...........................................................5/3
Switchboards for industrial applications with blank front .......................................................5/11
Marostica Series Switchboards
Marostica Series modular switchboards ...............................................................................5/17
Marostica Series cabled switchboards ..................................................................................5/23
FLC
O98
10
Tertiary/industrial application
5/3ABB SACE
5
SwitchboardsEuropa Series switchboards for industrial applications
Technical characteristics• protection degree IP 65
• insulation class II• available in the versions with opaque and transparent, smoky
vertically hinged doors• available in RAL 7035 grey• in polycarbonate material, self-extinguishing and resistant to
abnormal heat and fire up to 960 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• material with low halogen content• operating temperature from -25 °C to +115 °C• shock resistance 20 Joules (IK level 10)• high resistance to UV rays• perfectly symmetrical switchboards with the possibility of
attaching the door hinge onto the front (by means of thespecial articulated screws supplied) on the right or left with140° opening
• doors designed to take lock with coded key, code 12 866• designed for the insertion of an extractable frame with
pre-drilled panelling for mounting 100, 125 and 160 A circuitbreakers
• possibility of installation in environments with major risk in theevent of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• all models (except for code 12 764 and 12 784) are fittedwith one rigid and one bi-material flange to facilitate inser-tion of conduits and cables
• switchboards made and produced in compliance with CEI 23-48, CEI 23-49 and IEC 60 670 Standards
• switchboards are supplied complete with
- 4 screw-cover caps to guarantee - accessories for hinging the front part- 1 certification plate- instruction sheet
Accessorieses ...................................... page 5/6 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/26
FLC
O98
09
Europa Series switchboards forindustrial applications obtained theIMQ mark of approval
IMQ mark
5/4 ABB SACE
5
SwitchboardsEuropa Series switchboards for industrial applications
140x220x140 mm
Opaque, vertically hinged door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 764 140x220x140 1/14
205x220x140 mm
Code Dimensions (mm) Box/packWxHxD No items
12 768 205x220x140 1/9
275x220x140 mm
Code Dimensions (mm) Box/packWxHxD No items
12 772 275x220x140 1/6
Transparent, smoky vertically hinged door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 784 140x220x140 1/14
Code Dimensions (mm) Box/packWxHxD No items
12 788 205x220x140 1/9
Code Dimensions (mm) Box/packWxHxD No items
12 792 275x220x140 1/6
FLC
O91
45
FLC
O91
46
FLC
O91
43
FLC
O91
36
FLC
O91
38
FLC
O91
37
5/5ABB SACE
5
SwitchboardsEuropa Series switchboards for industrial applications
275x370x140 mm
Code Dimensions (mm) Box/packWxHxD No items
12 774 275x370x140 1/4
275x570x140 mm
Code Dimensions (mm) Box/packWxHxD No items
12 776 275x570x140 1/2
380x570x140 mm
Code Dimensions (mm) Box/packWxHxD No items
12 778 380x570x140 1/2
Opaque, vertically hinged door
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
12 794 275x370x140 1/4
Code Dimensions (mm) Box/packWxHxD No items
12 796 275x570x140 1/2
Code Dimensions (mm) Box/packWxHxD No items
12 798 380x570x140 1/2
Transparent, smoky vertically hinged door
RAL 7035 grey
FLC
O91
44
FLC
O91
41
FLC
O91
42
FLC
O91
39
FLC
O91
40
FLC
O91
35
5/6 ABB SACE
5
SwitchboardsAccessories for Europa Series switchboards for industrialapplications
Inner doors
Code For switchboards Box/packtype No items
12 825 12 774 – 12 794 1/1012 826 12 776 – 12 796 1/1012 827 12 778 – 12 798 1/10
Base platesIn insulating material
Code For switchboards Box/packtype No items
12 832 12 764 – 12 784 10/1012 834 12 768 – 12 788 10/1012 835 12 772 – 12 792 10/1012 836 12 774 – 12 794 5/512 837 12 776 – 12 796 5/512 838 12 778 – 12 798 5/5
Base platesIn aluminium-plated metal
Code For switchboards Box/packtype No items
12 842 12 764 – 12 784 10/12012 844 12 768 – 12 788 10/1012 845 12 772 – 12 792 10/1012 846 12 774 – 12 794 5/512 847 12 776 – 12 796 5/512 848 12 778 – 12 798 5/5
DIN section barsCompleted with screws
Code For switchboards Box/packtype No items
12 852 12 764 – 12 784 50/60012 854 12 768 – 12 788 30/36012 855 12 772 – 12 792 50/200
12 774 – 12 79412 776 – 12 796
12 856 12 778 – 12 798 50/200
FLC
O92
50
FLC
O92
49
FLC
O92
48
Code For switchboards No modules Box/packtype No items
12 820 12 774 – 12 794 12 for 1 rows 1/812 821 12 776 – 12 796 24 for 2 rows 1/512 822 12 778 – 12 798 36 for 2 rows 1/5
Kit for modular circuit breakersCircuit breakers 100, 125 160 A on DIN rail
FLC
O92
47
1SLC
0010
28F
0001
5/7ABB SACE
5
SwitchboardsAccessories for Europa Series switchboards for industrialapplications
Wall brackets
Code Description Box/packNo items
12 858 in insulating material 20/240
Key lock
Code Description Box/packNo items
12 866 coded type 10/300
Module covers
Code Colour No modules Box/packNo items
12 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
Universal cutterFor drill
Code Box/packNo items
12 894 1/30
To use for side branch connections.
FLC
O92
54
FLC
O92
28
FLC
O92
35
FLC
O92
40
5/8 ABB SACE
5
Spare flanges
Code For switchboards Box/packtype No items
12 600 12 768 – 12 788, bi-material 30/12012 601 12 772 – 12 792, bi-material 20/80
12 774 – 12 794, bi-material12 776 – 12 796, bi-material
12 602 12 778 – 12 798, bi-material 20/801SL0550A00 rigid flange 8 modules per row 30/1201SL0551A00 rigid flange 12 modules per row 20/801SL0552A00 rigid flange 18 modules per row 20/80
Semi-flush-mounting frames
Code For switchboardstype Box/pack
12 590 12 764 – 12 784 5/2012 591 12 768 – 12 788 5/2012 592 12 772 – 12 792 5/2012 593 12 774 – 12 794 5/2012 594 12 776 – 12 796 5/512 595 12 778 – 12 798 5/5
Spare doors
Opaque Transparent For switchboardsRAL 7035 grey smoky type Box/pack12 568 12 578 12 764 – 12 784 8/3212 569 12 579 12 768 – 12 788 10/2012 570 12 580 12 772 – 12 792 8/1612 571 12 581 12 774 – 12 794 5/1012 572 12 582 12 776 – 12 796 10/1012 573 12 583 12 778 – 12 798 8/8
Plastic spacer
Code Dimensions Box/pack(mm)
12 851 20 modules H30 10/60
FLC
O92
45F
LCO
9253
FLC
O92
37
FLC
O92
36
SwitchboardsAccessories for Europa Series switchboards for industrialapplications
1SLC
0010
17F
0001
5/9ABB SACE
5
SwitchboardsAccessories for Europa Series switchboards for industrialapplications
Terminal holders
Code For switchboards Box/packtype No items
12 538 12764 – 12784 12/36012 539 12768 – 12788 12/36012 540 12772 – 12774 – 12776 – 12792 12/144
12794 – 1279612 543 12778 – 12798 12/108
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips for bar, through two holes made at the ends ofthe bar itself.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
FLC
O92
94
FLC
O92
26
Terminal blocks
Box/packCode Description No items12 490 for switchboards 12764 e 12784 – composed of 12538x2 + 12531x2 10/6012 491 for switchboards 12768 e 12788 – composed of 12539x2 + 12531x2 10/6012 492 for switchboards 12772 e 12792 – composed of 12540x1 + 12531x1 + 12532x1 10/4012 494 for switchboards 12774 e 12794 – composed of 12540x2 + 12533x2 10/4012 493 for switchboards 12776 e 12796 – composed of 12540x2 + 12534x2 10/4012 497 for switchboards 12778 e 12798 – composed of 12543x2 + 12535x2 10/40
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separate from each other.
1SLC
0010
13F
0001
FLC
O98
58
Tertiary/industrial application
5/11ABB SACE
5
SwitchboardsSwitchboards for industrial applications with blank front
Technical characteristics• protection degree IP 65
• insulation class II• available in RAL 7035 grey• available in the versions with transparent, smoky doors• in polycarbonate material, self-extinguishing and resistant to
abnormal heat and fire up to 960 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• material with low halogen content• operating temperature from -25 °C to +115 °C• shock resistance 20 Joules (IK level 10)• perfectly symmetrical switchboards with possibility of hinging
the door onto the front (by means of the special articulatedscrews supplied) on the right or left with 140° opening
• doors designed to take lock with coded key, code 12 866(page 5/7)
• possibility of installation in environments with major risk in theevent of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• all models (except for code 13 200) are fitted with one rigidand one bi-material flange for the facilitated insertion ofconduits and cables
• switchboards made and produced in compliance with CEI23-48, CEI 23-49 and IEC 60 670 Standards
• switchboards are supplied complete with
- 4 screw-cover caps to guarantee - 1 self-adhesive label for row- accessories for hinging the front part- 1 certification plate- instruction sheet
Accessories ........................................ page 5/13 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/28
The switchboards for industrialapplication with blank front obtainedthe IMQ mark of approval
IMQ mark
1SLC
0010
29F
0001
5/12 ABB SACE
5
SwitchboardsSwitchboards for industrial applications with blank front
4 modules
Transparent, smoky door
RAL 7035 grey
12 modules 12 modules
Code Dimensions (mm) Box/packWxHxD No items
13 200 136x540x140 1/8
Code Dimensions (mm) Box/packWxHxD No items
13 204 275x370x140 1/4
Code Dimensions (mm) Box/packWxHxD No items
13 206 275x570x140 1/3
12 modules
Transparent, smoky door
RAL 7035 grey
FLC
O91
05
FLC
O91
56
FLC
O91
47
Code Dimensions (mm) Box/packWxHxD No items
13 208 380x570x140 1/2
18 modules
Code Dimensions (mm) Box/packWxHxD No items
13 205 275x455x140 1/3
FLC
O92
95
FLC
O92
96
5/13ABB SACE
5
FLC
O92
27
FLC
O92
26
SwitchboardsAccessories for switchboards for industrial applications withblank front
Terminal holders
Code Description For switchboards Box/packtype No items
12 540 for 12 modules 13 204 – 13 205 – 13 206 12/14412 543 for 18 modules 13 208 12/108
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separate from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Terminal blocks
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
Terminal holders and terminal bars are supplied separately. In this way, by inserting one or two terminal bars into the terminal holder you can create the best terminalfor your requirements, with the advantage of obtaining a terminal block that is cheap as well as personalised, due to the fact that you only need to use material that isreally necessary. Some standard configurations are illustrated in the table.All the possible configurations that can be created for each type of consumer unit are given in the technical details.
Box/packCode Description No items12 492 for 12 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 498 for 18 modules – composed of 12543x1 + 12531x1 + 12535x1 10/40
1SLC
0010
13F
0001
5/14 ABB SACE
5Wall brackets
Code Description Box/packNo items
12 858 in insulating material 20/240
Universal cutter
Code Box/packNo items
12 894 1/30
To use for side branch connections.
FLC
O92
35
FLC
O92
54
Semi-flush-mounting frames
Code For switchboards Box/pack
12 598 13 200 5/2012 593 13 204 5/2012 599 13 205 5/512 594 13 206 5/512 595 13 208 5/5
FLC
O92
36
SwitchboardsAccessories for switchboards for industrial applications withblank front
5/15ABB SACE
5
Module covers
Code Description For switchboards Box/packtype No items
12 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
FLC
O92
28
FLC
O92
93
Spare flanges
Code For switchboards Box/packtype No items
12 601 13 204 – 13 205 – 13 206, bi-material 20/8012 602 13 208, bi-material 20/801SL0551A00 rigid flange 12 modules per row 20/801SL0552A00 rigid flange 18 modules per row 20/80
SwitchboardsAccessories for switchboards for industrial applications withblank front
Key lock
Code Description Box/packNo items
12 866 coded type 10/300
FLC
O92
40
1SLC
0010
17F
0001
FLC
O98
08
Tertiary/industrial application
5/17ABB SACE
5
SwitchboardsMarostica Series modular switchboards
Technical characteristics• protection degree IP, depending on the installed sockets and
plates• insulation class II• available in the version that can be fitted with sockets with
sloped consumer unit and with vertical flush-mountingsocket with locking switch
• available in RAL 7035 grey• in polycarbonate material, self-extinguishing and resistant to
abnormal heat and fire up to 960 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• material with low halogen content• operating temperature from -25 °C to +115 °C• shock resistance 20 Joules (IK level 10)• high resistance to UV rays• depth of socket compartment: 85 mm• perfectly symmetrical switchboards with possibility of hinging
the door onto the front (by means of the special articulatedscrews supplied) on the right or left with 140° opening
• doors designed to take lock with coded key, code 12 866• possibility of installation in environments with major risk in the
event of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• designed to be mounted with the main sockets on the marketcomplying with IEC 309-1 Standards through the use ofuniversal plates
• all models (except for code 13 210) are fitted with one rigidand one bi-material flange for the facilitated insertion ofconduits and cables
• switchboards made and produced in compliance with CEI 23-48, and IEC 60 670 Standards
• switchboards are supplied complete with- 4 screw-cover caps to guarantee - 1 self-adhesive label per row- accessories for hinging the front part- 1 certification plate- instruction sheet
Accessories ........................................ page 5/19 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/30
FLP
R98
11
Marostica Series modularswitchboards obtained the IMQ markof approval
IMQ mark
5/18 ABB SACE
5
4 modules
Can be equipped with3 plates
RAL 7035 grey
SwitchboardsMarostica series modular switchboards
12 modules
Code Dimensions (mm) Box/packWxHxD No items
13 210 136x540x140 1/8
Can be equipped with4 plates
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
13 215 275x455x140 1/3
12 modules
Can be equipped with6 plates
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
13 216 275x570x140 1/3
18 modules
Can be equipped with9 plates
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
13 218 380x570x140 1/2
12 modules
Can be equipped with2 sockets
RAL 7035 grey
12 modules
Code Dimensions (mm) Box/packWxHxD No items
13 224 275x370x140 1/4
Can be equipped with4 sockets
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
13 226 275x570x140 1/3
18 modules
Can be equipped with6 sockets
RAL 7035 grey
Code Dimensions (mm) Box/packWxHxD No items
13 228 380x570x140 1/2
Dedicated switchboards for vertical flush-mounting sockets with block circuit breaker
Fixed directly without plates.
FLC
O91
57
FLC
O91
54
FLC
O91
48
FLC
O91
53
FLC
O91
49
FLC
O91
52
FLC
O91
50
5/19ABB SACE
5
SwitchboardsAccessories for Marostica Series modular switchboards
Plates for switchboards code 13 210 – 13 215 – 13 216 – 13 218 suitable totake angled consumer unit sockets.
Code Type Description Box/packplate No items
13 251 S blank 10/6013 261 D blank 10/4013 253 S for 1 socket 10/6013 263 D for 2 socket 10/4013 255 S for 1 socket 10/6013 265 D for 2 socket 10/4013 257 S for 1 socket 10/6013 267 D for 2 socket 10/4013 245* S 216R…/216U
for 1 socket 10/6013 246* S 316R…/316U…/416R…/416U…
for 1 socket 10/4013 247* S 232…/332U…/432R…
for 1 socket 10/60
S = Single – suitable to take one IEC 309-1 16 A or 32 A sockets.D = Double – suitable to take 2 IEC 309-1 16 A or 32 A sockets.* ABB CEWE socket (snap-on fixing).
Plates for switchboardsPlates for switchboards code 13 210 – 13 215 – 13 216 – 13 218 suitable totake vertical, flush-mounting sockets with block circuit breakers.
Code Type Description Box/packplate No items
13 273 D ABB compact interlocked 16 A 10/40113x226 mm
13 283 D GEWISS compact interlocked 16 A - 32 A 10/40without fuse holder baseseries 66 IB 103x220 mm
13 285 D GEWISS compact interlocked 16 A - 32 A 10/40without fuse holder baseseries 66 IB 155x115 mm
13 275 D ILME compact interlocked 16 A - 32 A 10/40series BK 113x226 mm
13 279 D ILME compact interlocked 16 A - 32 A 10/40series SQ 145x115 mm
13 281 D SCAME compact interlocked 16 A 10/40series BK 115x45 mm
13 287 D OVA horizontal interlocked 16 A 10/40155x115 mm
D = Double – suitable for taking 1 IEC 309-1, flush-mounting socket with block circuit breaker.
Plates for switchboardsF
LCO
9255
FLC
O91
09
FLC
O92
56
FLC
O91
10
FLC
O92
60
FLC
O91
13
FLC
O91
16
FLC
O92
61
Table for selecting correct combination of angled consumer units sockets and plates
Type of Type of plateRated cur. socket No Poles Type of For sockets For sockets For sockets For sockets For sockets For sockets(In) IP level plate ABB CEWE Gewiss Scame Ilme Palazzoli Legrand
2P+T S 13 245 13 253 13 253 13 253 13 253D 13 263 13 263 13 263 13 263
IP44 3P+T S 13 246 13 253 13 253 13 253 13 253D 13 263 13 263 13 263 13 263
3P+N+T S 13 246 13 253 13 253 13 255 13 255
16 A D 13 263 13 263 13 265 13 2652P+T S 13 253 13 253 13 253 13 253
D 13 263 13 263 13 263 13 263
IP67 3P+T S 13 253 13 253 13 253 13 253D 13 263 13 263 13 263 13 263
3P+N+T S 13 253 13 253 13 255 13 255D 13 263 13 263 13 265 13 265
2P+T S 13 247 13 255 13 257 13 255D 13 265 13 267 13 265
IP44 3P+T S 13 247 13 255 13 257 13 255D 13 265 13 267 13 265
3P+N+T S 13 247 13 257 13 257 13 257
32 A D 13 267 13 267 13 2672P+T S 13 255 13 257 13 255 13 255
D 13 265 13 267 13 265 13 265
IP67 3P+T S 13 255 13 257 13 255 13 255D 13 265 13 267 13 265 13 265
3P+N+T S 13 257 13 257 13 257 13 257D 13 267 13 267 13 267 13 267
S = Single – suitable to take oneIEC 309-1 16 A or 32 Asockets.
D = Double – suitable to take 2 IEC309-1 16 A or 32 Asockets.
5/20 ABB SACE
5
SwitchboardsAccessories for Marostica Series modular switchboards
Plates for switchboards code 13 210 – 13 215 – 13 216 – 13 218 suitable to takeresidential devices.
Code Type Description Box/packplate No items
13 259 S for 1 single or 10/60double sealed command
13 269 D for 2 single or 10/40double sealed commands
13 271 D for modular device 10/40supports with inter-axis
of 83.5 mm
S = Single – suitable to take a single or double sealed command (see page5/16 and 5/17).
D = Double – suitable to take two single or double sealed commands (seepage 5/16 and 5/17) and supports for modular devices withinter-axis of 83.5 mm.
Plates for switchboardsPlates for switchboards code 13 224 – 13 226 – 13 228.
Code Description Box/packNo items
13 240 blank 10/60
Plates for switchboards
Wall brackets
Code Description Box/packNo items
12 858 in insulating material 20/240
FLC
O92
63
FLC
O92
35
Module covers
Code Colour No modules Box/packNo items
12 861 RAL 7035 grey 1 50/150012 863 RAL 7035 grey 4 50/600
FLC
O92
38
FLC
O92
59
FLC
O91
13
FLC
O91
16
Semi-flush-mounting frames
Code For switchboards type Box/pack
12 598 13 210 5/2012 593 13 224 5/2012 599 13 215 5/512 594 13 216 – 13 226 5/512 595 13 218 – 13 228 5/5
FLC
O92
36
5/21ABB SACE
5
FLC
O92
27
FLC
O92
26
SwitchboardsAccessories for Marostica Series modular switchboards
Terminal-holders
Code Description For switchboards Box/packtype No items
12 540 for 12 modules 13 215 – 13 224 12/14413 216 – 13 226
12 543 for 18 modules 13 218 – 13 228 12/108
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separate from each other.
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
Spare flanges
Code For switchboards type Box/packNo items
12 601 13 322 – 13 323 – 13 224 – 13 325 – 13 32613 327 – 13 228 – 13 329 – 13 330 – 13 335, bi-material 20/80
12 602 13 350 – 13 356 – 13 357, bi-material 20/801SL0551A00 rigid flange 12 modules per row 20/801SL0552A00 rigid flange 18 modules per row 20/80
Lock with key
Code Description Box/packNo items
12 866 coded type 10/300
FLC
O92
40
FLC
O92
93
Terminal blocks
Box/packCode Description No items12 492 for 12 modules – composed of 12540x1 + 12531x1 + 12532x1 10/4012 498 for 18 modules – composed of 12543x1 + 12531x1 + 12535x1 10/40
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
17F
0001
1SLC
0010
13F
0001
FLP
R98
00
Tertiary/industrial application
5/23ABB SACE
5
SwitchboardsMarostica Series cabled switchboards
Technical characteristics• protection degree IP 44 and IP 55, depending on the version
• insulation class II• available in RAL 7035 grey• in polycarbonate material, self-extinguishing and resistant to
abnormal heat and fire up to 960 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• material with low halogen content• operating temperature from -25 °C to +115 °C• shock resistance 20 Joules (IK 10 level)• high resistance to UV rays• possibility of hinging the door onto the front (by means of the
special articulated screws supplied) on the right or left with140° opening
• possibility of installation in environments with major risk in the
event of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• made with IMQ mark sockets and circuit breakers• other types of configurations available on request• all models (except for code 13 291 and 13 292) are fitted
with one rigid and one bi-material flange for the facilitatedinsertion of conduits and cables
• switchboards are supplied complete with:
- 4 screw-cover caps to guarantee - 1 self-adhesive label per row- accessories for hinging the front part- 1 cable clamp + 1 nut for cable clamp- 1 lock with coded key- 1 certification plate- instruction sheet
Accessories ........................................ page 5/26 Technical details ............................... page 9/1
FLP
R98
10
5/24 ABB SACE
5
SwitchboardsMarostica Series cabled switchboards
IP 44
Socket 6 kA automatic circuit breakers Box/packCode Q.ty Type Q.ty Type No items
1 16 A Bi-socket 1 2p 32 A13 291 1 16 A Schuko 1/1
1 2p+E 16 A 220 V1 16 A Bi-socket 1 4p 32 A
13 292 1 16 A Schuko 1/11 3p + E 16 A 380 V
IP 44 - IP 55
IP44 Switchboards
Socket 6 kA automatic circuit breakers Box/packCode Q.ty Type Q.ty Type No items
1 interlocked 1 1p+N 16 A 1/12p+E 16 A 220 V 1 3p 16 A
13 3221 interlocked
3p+E 16 A 380 V1 interlocked 1 1p+N 16 A
2p+E 16 A 220 V 1 3p 32 A13 323
1 interlocked1/1
3p+E 16 A 380 V
13 324 2 interlocked 2 1p+N 16 A 1/12p+E 16 A 220 V
IP55 Switchboards
Socket 6 kA automatic circuit breakers Box/packCode Q.ty Type Q.ty Type No items
1 interlocked 1 1p+N 16 A 1/12p+E 16 A 220 V 1 3p 16 A
13 3251 interlocked
3p+E 16 A 380 V1 interlocked 1 1p+N 16 A
2p+E 16 A 220 V 1 3p 32 A 1/113 3261 interlocked
3p+E 32 A 380 V
13 327 2 interlocked 2 1p+N 16 A 1/12p+E 16 A 220 V
Note: Other configurations are available on request
FLC
O91
58
FLC
O91
59
5/25ABB SACE
5
SwitchboardsMarostica Series cabled switchboards
IP 44
Socket 6 kA automatic circuit breakers Box/packCode Q.ty Type Q.ty Type No items
1 Bi-socket 16 A 1 1p+N 16 A1 Schuko 16 A 1 3p 16 A
13 328 1 2p+E 16 A 220 V 1 4p 16 A 1/11 3p+E 16 A 380 V1 3p+N+E 16 A 380 V
IP 44 - IP 55
IP44 SwitchboardsSocket 6 kA automatic circuit breakers Box/pack
Code Q.ty Type Q.ty Type No items1 2p+E 16 A 220 V 1 1p+N 16 A
13 329 2 3p+E 16 A 380 V 1 3p 16 A 1/11 3p+N+T 16 A 380 V 1 4p 16 A1 2p+E 16 A 220 V 1 1p+N 16 A
13 330 1 3p+E 16 A 380 V 1 3p 16 A1 3p+N+T 16 A 380 V 1 4p 16 A
1/1
1 3p+E 32 A 380 V 1 3p 32 A
IP55 SwitchboardsSocket 6 kA automatic circuit breakers Box/pack
Code Q.ty Type Q.ty Type No items1 2p+E 16 A 220 V 1 1p+N 16 A
13 335 1 3p+E 16 A 380 V 1 3p 16 A1 3p+N+T 16 A 380 V 1 4p 16 A
1/1
1 3p+E 32 A 380 V 1 3p 32 A
IP 55
Socket 6 kA automatic circuit breakers Box/packCode Q.ty Type Q.ty Type No items
1 Schuko 16 A 1 1p+N 16 A2 2p+E 16 A 220 V 2 3p 16 A
13 350 3 3p+E 16 A 380 V 1 4p 16 A 1/11 3p+N+E 16 A 380 V 1 3p 32 A2 3p+E 32 A 380 V
IP 55
Socket 6 kA automatic circuit breakers Box/packCode Q.ty Type Q.ty Type No items
1 interlocked 1 1p+N 16 A 1/12p+E 16 A 220 V 1 3p 16 A
13 356 1 interlocked3p+E 16 A 380 V
1 interlocked3p+N+E 16 A 380 V
1 interlocked 1 3p 16 A 1/13p+E 16 A 380 V 1 4p 16 A
13 357 1 interlocked 1 3p 32 A3p+N+E 16 A 380 V
1 interlocked3p+E 32 A 380 V
FLC
O91
61
FLC
O91
62
FLC
O91
63
1SLC
0010
30F
0001
5/26 ABB SACE
5
SwitchboardsAccessories for Marostica Series cabled switchboards
Wall brackets
Code Description Box/packNo items
12 858 in insulating material 20/240
FLC
O92
35
Spare flanges
Code For switchboards type Box/packNo items
12 601 13 244 –13 216 – 13 226, bi-material 20/8012 602 13 218 – 13 228, bi-material 20/801SL0551A00 rigid flange 12 modules per row 20/801SL0552A00 rigid flange 18 modules per row 20/80
FLC
O92
93
1SLC
0010
17F
0001
Boxes, equipment
Index
6/1ABB SACE
and various components
6
IP 44 and IP 55 boxes
IP 44 and IP 55 junction boxes in thermoplastic material .......................................................6/3
IP 65 Boxes
IP 65 junction boxes in polycarbonate ....................................................................................6/9
IP 40 and IP 55 equipment
IP 40 equipment and empty enclosures ................................................................................6/15
IP 55 equipment and empty enclosures ................................................................................6/15
Various components
Various equipment and components .....................................................................................6/18
FLC
O98
11
Tertiary/industrial application
6/3ABB SACE
6
Boxes, equipment and various componentsIP 44 and IP 55 junction boxes in thermoplastic material
Technical characteristics• protection degree:
- IP 44 for press-on lid boxes- IP 55 for screw-on lid boxes
• insulation class II• available in RAL 7035 grey• boxes with press-on lids in thermoplastic material, self-
extinguishing in compliance with UL 94 HB Standard andresistant to abnormal heat and fire up to 650 °C (glow wiretest) in compliance with IEC 60695-2-1 Standard
• boxes with opaque screw-on lids in thermoplastic material,self-extinguishing in compliance with UL 94 V-O Standard andresistant to abnormal heat and fire up to 960 °C (glow wiretest) in compliance with IEC 695-2-1 Standard
• boxes with screw-on covers in transparent polycarbonatematerial, self-extinguishing in compliance with UL 94 V-2Standard and resistant to abnormal heat and fire up to 960 °C(glow wire test) in compliance with IEC 60695-2-1 Standard
• operating temperature from -25 °C to +75 °C
Accessorieses ...................................... page 6/6 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/32
FLC
O98
41
IP 44 and IP 55 junction boxes inthermoplastic material obtained theIMQ mark of approval
IMQ mark
Type approval Italian NavalRegister ELE/8998/2
• shock resistance 6 Joules• high resistance to heat and chemical and atmospheric agents• wide range with press on lids, lids with stainless steel screws
and lids with rapid-pitch, safety screws in thermoplasticinsulating material
• boxes with protection degree IP 55 are composed of apatented lid produced in a single pressing phase togetherwith its seal
• all the boxes with cable-way inlets are suitable to be installedwith mini-trunkings by using special connectors ABB
• when fitted with special housings, the base of the box can beequipped with terminals and various accessories
• boxes measuring 160x135, 220x170 and 310x240 mm canbe mounted on the wall with brackets code 12 858
• junction boxes made in compliance with CEI 23-48 and IEC60 670 Standards
6/4 ABB SACE
6
Boxes, equipment and various componentsIP 44 and IP 55 junction boxes in thermoplastic material
IP 44 boxesWith cable glands and press-on lid
IP 44 boxesWith cable glands and press-on lid
Code Internal Box/packdimensions (mm) No items
00 800 Ø 60 – H 35 240/24000 802 Ø 80 – H 40 144/144
Also available, on request, in self-extinguishingversion in compliance with UL 94 VO Standard andresistant to abnormal heat and to fire up to 960 °C incompliance with IEC 60695-2-1.
Code Internal Box/packdimensions (mm) No items
00 808 65x65x32 168/16800 810 80x80x40 100/100
Also available, on request, in self-extinguishingversion in compliance with UL 94 VO Standard andresistant to abnormal heat and to fire up to 960 °C incompliance with IEC 60695-2-1.
IP 55 boxesWith cable glands and low screw-on lid
Code Internal Screws Box/packdimensions (mm) No items
00 816 100x100x50 in steel 1/5400 820 105x70x50 in steel 1/7000 821 100x100x80 in steel 1/40
IP 55 boxesWith smooth walls and low screw-on lid
Code Internal Screws Box/packdimensions (mm) No items
00 846 100x100x50 in steel 1/6000 850 105x70x50 in steel 1/10000 851 100x100x80 in steel 1/40
FLC
O91
99
FLC
O92
00
FLC
O91
98
FLC
O92
04
6/5ABB SACE
6
Boxes, equipment and various componentsIP 44 and IP 55 junction boxes in thermoplastic material
IP 55 boxesWith cable glands and low screw-on lid
Code Internal Screws Box/packdimensions (mm) No items
00 822 153x110x66 in steel 1/3200 824(*) 160x135x77 in steel 1/1800 826(*) 220x170x80 in therm. material 1/1200 828(*) 310x240x110 in therm. material 1/6
(*) Can be wall-mounted using wall brackets code 12 858.
IP 55 boxesWith cable glands walls and high screw-on lid
Code Internal Screws Box/packdimensions (mm) No items
00 830 160x135x150 in steel 1/1600 832 220x170x150 in therm. material 1/800 834 310x240x160 in therm. material 1/4
Can be wall-mounted using wall brackets code12 858.
IP 55 boxesWith smooth walls and transparent low screw-on lid
Code Internal Screws Box/packdimensions (mm) No items
00 872 153x110x66 in steel 1/3400 874(*) 160x135x77 in steel 1/2400 876(*) 220x170x80 in therm. material 1/1200 878(*) 310x240x110 in therm. material 1/6
(*) Can be wall-mounted using wall brackets code 12 858.
IP 55 boxesWith smooth walls and low screw-on lid
Code Internal Screws Box/packdimensions (mm) No items
00 852 153x110x66 in steel 1/3400 854(*) 160x135x77 in steel 1/2400 856(*) 220x170x80 in therm. material 1/1200 858(*) 310x240x110 in therm. material 1/6
(*) Can be wall-mounted using wall brackets code 12 858.
IP 55 boxesWith smooth walls and high screw-on lid
Code Internal Screws Box/packdimensions (mm) No items
00 860 160x135x150 in steel 1/1600 862 220x170x150 in therm. material 1/800 864 310x240x160 in therm. material 1/4
Can be wall-mounted using wall brackets code 12 858.
IP 55 boxesWith smooth walls and transparent high screw-on lid
Code Internal Screws Box/packdimensions (mm) No items
00 880 160x135x150 in steel 1/1600 882 220x170x150 in therm. material 1/800 884 310x240x160 in therm. material 1/4
Can be wall-mounted using wall brackets code 12 858.
FLC
O91
02
FLC
O92
02
FLC
O92
05
FLC
O92
06
FLC
O92
071S
LC00
1031
F00
01
6/6 ABB SACE
6
Boxes, equipment and various componentsAccessories for IP 44 and IP 55 junction boxesin thermoplastic material
Cable glands and nuts - PG pitch
Code Pitch Cable clamp For cables diameter Nuts x cableBox/pack Box/pack
cable gland nut x cable gland Pg No items Min. (mm) Max. (mm) No items00 931 00 941 9 100/500 6.5 8.5 100/300000 932 00 942 11 100/500 8 10 100/300000 933 00 943 13.5 50/500 8 11 50/150000 934 00 944 16 50/250 11 14 50/150000 935 00 945 21 50/250 14.5 18 50/150000 936 00 946 29 25/150 19 26 50/60000 937 00 947 36 25/75 30 34 25/30000 938 00 948 42 15/60 30 38 25/300
FLC
O92
67
FLC
O92
91
Cable glands and nuts - metric pitch
Code Pitch Cable diameter Cable clampBox/pack Box/pack
cable gland nut M Min. (mm) Max. (mm) No items No items00 951 00 961 12 3.5 7 100/1200 100/300000 952 00 962 16 5.5 10 100/500 100/300000 953 00 963 20 7 13 100/500 50/150000 954 00 964 25 10 17 50/250 50/150000 955 00 965 32 12 21 25/150 50/50000 956(*) 00 966 40 19 28 25/75 25/30000 957(*) 00 967 50 27 35 15/60 25/30000 958(*) 00 968 63 34 45 ago-32 20/100
Technical characteristics of metric cable clampsProtection degree IP 68Material: polyamide 6.6, self-extinguishing material according to UL94 V2Standard and resistant to abnormal heat and to fire up to 750 °C (glow wire test)according to IEC 60695-2-1 StandardOperational temperature: from -20 °C up to +120 °C (short period of time)Colour: RAL 7035 greyThread pitch: 1.5 mmThread angle: 60°Neoprene sealTightening with a plate crown on the whole diameter of cable (excluded thepossibility to damage the cable itself)Possibility to recover the cable clamp without compromising its efficiency
Technical characteristics nuts of with metric pitch collarMaterial: polyamide 6.6, self-extinguishing material according to UL94 V2Standard and resistant to abnormal heat and to fire up to 750 °C (glow wire test)according to IEC 60695-2-1 StandardOperational temperature: from -20 °C up to +120 °C (continuous)from -20 °C up to +120 °C (short period of time)Colour: RAL 7035 greyThread pitch: 1.5 mmThread angle : 60°
(*) Cable clamps and M40, M50 and M63 nuts are available on request.
1SLC
0010
32F
0001
1SLC
0010
33F
0001
6/7ABB SACE
6
Boxes, equipment and various componentsAccessories for IP 44 and IP 55 junction boxesin thermoplastic material
Metal base plates
Code For boxes Box/packtype No items
00 900 00 824 – 00 830 – 00 874 1/1000 854 – 00 860 – 00 880
00 902 00 826 – 00 832 – 00 876 1/500 856 – 00 862 – 00 882
00 904 00 828 – 00 834 – 00 878 1/500 858 – 00 864 – 00 884
Cable clamps
Code For conduit Box/packØ (mm) No items
00 908 20 100/150000 910 25 100/100000 912 32 50/400
Conduit – box connectors
Code For conduit Box/packØ (mm) No items
00 420 16 500/50000 421 20 300/30000 422 25 250/25000 423 32 150/15000 424 40 50/5000 425 50 50/50
Conduit clamps
Code For conduit Box/packØ (mm) No items
00 430 16 500/50000 431 20 300/30000 432 25 150/15000 433 32 100/10000 434 40 50/5000 435 50 50/50
Unions
Code Ø (mm) Box/packNo items
13 874 23 10/50013 875 28.5 100/40013 876 37 100/200
FLC
O92
65
FLC
O92
66
FLC
O92
51F
LCO
9252
FLC
O99
39
Protection degree: IP 55
Protection degree: IP 67 Protection degree: IP 67
All metal base plates listed above are equipped with fixing screws type 3.5x9.5.
Protection degree: IP 55
FLC
O98
12
Tertiary/industrial application
6/9ABB SACE
6
Boxes, equipment and various componentsIP 65 junction boxes in polycarbonate
Technical characteristics• protection degree IP 65
• insulation class II • available in RAL 7035 grey• in polycarbonate material, self-extinguishing and resistant to
abnormal heat and fire up to 960 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• material with low halogen content• operating temperature from -25 °C to +115 °C• shock resistance 20 Joules (IK level 10)• high resistance to UV rays• perfectly symmetrical junction boxes with possibility of
attaching the lid hinges, (using the special articulated screwssupplied) on the right or left with 140° opening
• possibility of installation in environments with major risk in theevent of fire (CEI 64-8 part 7 section 751 Standard) and inAD-FT environments (CEI 64-2 Standard, IV edition)
• boxes code 12 808, 12 812, 12 814, 12 816 and 12 818fitted with one rigid and one bi-material flange for facilitatedinput of conduits and cables
• junction boxes produced in compliance with CEI 23-48 andIEC 60 670 Standards
• boxes are supplied complete with:
- 4 screw-cover caps to guarantee - accessories for attaching the hinges on the front- 1 certification plate- instruction sheet
Accessories ........................................ page 6/11 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/34
FLC
O98
42
IP 65 junction boxes inpolycarbonate material obtainedthe IMQ mark of approval
IMQ mark
6/10 ABB SACE
6
Boxes, equipment and various componentsIP 65 junction boxes in polycarbonate
140x220x140 mm 205x220x140 mm 275x220x140 mm
275x370x140 mm 275x570x140 mm 380x570x140 mm
Code Dimensions (mm) Box/packWxHxD No items
12 804 140x220x140 1/14
Code Dimensions (mm) Box/packWxHxD No items
12 808 205x220x140 1/9
Code Dimensions (mm) Box/packWxHxD No items
12 812 275x220x140 1/6
Code Dimensions (mm) Box/packWxHxD No items
12 814 275x370x140 1/4
Code Dimensions (mm) Box/packWxHxD No items
12 816 275x570x140 1/2
Code Dimensions (mm) Box/packWxHxD No items
12 818 380x570x140 1/2
FLC
O92
08
FLC
O92
09
FLC
O92
10
FLC
O92
11
FLC
O92
12
FLC
O92
13
6/11ABB SACE
6
Boxes, equipment and various componentsAccessories for IP 65 junction boxes in polycarbonate
DIN metal section barsComplete with screws
Code For boxes Box/packtype No items
12 852 12 804 50/60012 854 12 808 30/36012 855 12 812 – 12 814 – 12 816 50/20012 856 12 818 50/200
Wall brackets
Code Description Box/packNo items
12 858 in insulating material 20/240
FLC
O92
70
FLC
O92
35
Code For boxes Box/packtype No items
12 832 12 804 10/1012 834 12 808 10/1012 835 12 812 10/1012 836 12 814 5/512 837 12 816 5/512 838 12 818 5/5
Base platesIn insulating material
Code For boxes Box/packtype No items
12 842 12 804 10/12012 844 12 808 10/1012 845 12 812 10/1012 846 12 814 5/512 847 12 816 5/512 848 12 818 5/5
Base platesIn aluminium-plated metal
FLC
O92
49
FLC
O92
48
6/12 ABB SACE
6
Boxes, equipment and various componentsAccessories for IP 65 junction boxes in polycarbonate
Terminal bars
Code Description Box/packNo of holes x Ø holes (mm) + No of holes x Ø holes (mm) No items
12 531 5x4.5 20/24012 532 10x4.5 + 3x5.6 20/24012 533 16x4.5 + 3x5.6 20/24012 534 15x4.5 + 6x5.6 20/24012 535 19x4.5 + 6x5.6 20/240
The terminal bars can be installed on any kind of terminal holder; they aresnapped onto these with 2 clips per bar, through two holes made at the ends ofthe bar itself.
FLC
O92
26
Terminal holders
Code For boxes Box/packtype No items
12 538 12 804 12/36012 539 12 808 12/36012 540 12 812 – 12 814 – 12 816 12/14412 543 12 818 12/108
The terminal block is completed by combining the necessary terminal bars to theterminal holders, taking care to keep the terminal bars separated from each other.
FLC
O92
27
Terminal blocks
Box/packCode Description No items12 490 for box 12804 – composed of 12538x2 + 12531x2 10/6012 491 for box 12808 – composed of 12539x2 + 12531x2 10/6012 492 for box 12812 – composed of 12540x1 + 12531x1 + 12532x1 10/4012 494 for box 12814 – composed of 12540x2 + 12533x2 10/4012 493 for box 12816 – composed of 12540x2 + 12534x2 10/4012 497 for box 12818 – composed of 12543x2 + 12535x2 10/40
The complete terminal blocks are composed of a combination of terminal holders and terminal bars as indicated in the description,with the terminal bars already mounted on terminal holders.Configuration of the complete terminal block is standard. For different requirements (customized terminal block), the terminal holdersand bars must be procured separately in the versions indicated in the table.
1SLC
0010
13F
0001
6/13ABB SACE
6
Boxes, equipment and various componentsAccessories for IP 65 junction boxes in polycarbonate
Spare flanges Semi-flush-mounting frames
Universal cutterFor drill
Code For boxes Box/packtype No items
12 590 12 804 5/2012 591 12 808 5/2012 592 12 812 5/2012 593 12 814 5/2012 594 12 816 5/512 595 12 818 5/5
Code For boxes Box/packtype No items
12 600 12 808, bi-material 30/12012 601 12 812 – 12 814 – 12 816, bi-material 20/8012 602 12 818, bi-material 20/801SL0550A00 rigid flange, 8 modules per row 30/1201SL0551A00 rigid flange, 12 modules per row 20/801SL0552A00 rgid flange, 18 modules per row 20/80
Code Box/packNo items
12 894 1/30
To be used for side branch connections.
FLC
O92
37
FLC
O92
36
FLC
O92
54
1SLC
0010
17F
0001
FLC
O98
15
FLC
O98
16
Residential/tertiary/industrial application
6/15ABB SACE
6
IP 40 equipment and empty enclosures
Technical characteristics• IP 40 equipment and empty enclosures composed of base
and cover, joined with safety screws with bivalent slotted headin stainless steel
• equipment and empty enclosures with cable gland on the top• equipment and empty enclosures designed to be installed
with conduits and, using special accessories, with mini-trunkings ABB
• empty enclosures suitable for:- wiring accessories in the 8000 Vimar and Magic BTicino
series- wiring accessories in the Idea Vimar and Living BTicino
series• protection degree IP 40
• insulation class II • enclosures available in RAL 7035 grey• in thermoplastic material, self-extinguishing and resistant to
abnormal heat and fire up to 650 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• operating temperature from -20 °C to +85 °C• high resistance to UV rays• high resistance to shocks heat and chemical and atmospheric
agents• empty enclosures made in compliance with CEI 23-48 and
IEC 670 Standards• enclosures equipped with control devices made in compliance
with CEI 23-9 Standard• enclosures equipped with bypass sockets made in complian-
ce with CEI 23-16 Standard• enclosures equipped with Schuko sockets made in complian-
ce with CEI 23-5 Standard
Boxes, equipment and various componentsIP 40 and IP 55 equipment and empty enclosures
IP 55 equipment and empty enclosures
Technical characteristics• IP 55 equipment and empty enclosures composed of base
and cover, joined with safety screws with bivalent slotted headin stainless steel
• equipment and empty enclosures fitted with seal between thebase and the cover; lid with transparent elastic membrane sothat controls can be used even when the lid is closed
• equipment and empty enclosures with cable gland on the top• equipment and empty enclosures designed to be installed
with conduits and, using special accessories, with mini-trunkings ABB
• empty enclosures suitable for:- wiring accessories in the 8000 Vimar and Magic BTicino
series- wiring accessories in the Idea Vimar and Living BTicino
series• protection degree IP 55
• insulation class II• containers available in RAL 7035 grey• in thermoplastic material, self-extinguishing and resistant to
abnormal heat and fire up to 650 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• operating temperature from -20 °C to +85 °C• high resistance to UV rays• high resistance to shocks, heat and chemical and atmosphe-
ric agents• empty enclosures made in compliance with CEI 23-48 and
IEC 670 Standards• enclosures equipped with control equipment made in com-
pliance with CEI 23-9 Standard• enclosures equipped with bypass sockets made in complian-
ce with CEI 23-16 Standard• enclosures equipped with Schuko sockets made in complian-
ce with CEI 23-5 Standard• lid/cover opening angle: 120°
Technical details .................................. page 9/1 Overall dimensions ....................... page 10/36
IP 40 and IP 55 equipment andempty enclosures obtained theIMQ mark of approval
IMQ mark
1SLC
0010
34F
0001
6/16 ABB SACE
6
Boxes, equipment and various componentsIP 40 equipment and empty enclosures
IP 40 equipmentEquipped with Vimar 8000 series wiring accessories
Code Description Box/packNo items
00 500 10 A circuit breaker 10/4000 501 10 A switch 10/4000 502 10 A inverter 10/4000 503 16 A bi-polar circuit breaker 10/4000 504 10 A NO push button 10/4000 505 10 A double switch 10/40
Code Description Box/packNo items
00 510 bypass socket 2x16 A + earth 10/4000 511 double bypass socket 2x16 A + earth 10/4000 512 bipolar circuit breaker + bypass socket 2x16 A + earth 10/4000 513 Schuko(*) socket 10/16 A + side earth 10/40
Code Description Box/packNo items
00 541 1 compartment 10/4000 542 2 compartments 10/4000 543 3 compartments 10/3000 544 4 compartments 10/2000 546 6 compartments 10/20
(*) Can be equipped with Magic BTicino wiring accessories using the adaptersupplied
IP 40 empty enclosuresFor Vimar 8000 series and Magic BTicino (*) wiring accessories
IP 40 empty enclosuresFor Vimar Idea series and Living BTicino (*) wiring accessories (*)
Code Description Box/packNo items
00 641 1 compartment 10/4000 642 2 compartments 10/4000 643 3 compartments 10/3000 644 4 compartments 10/2000 646 6 compartments 10/20
(*) Can be equipped with Living BTicino wiring accessories using the adaptersupplied.
FLC
O91
64
FLC
O91
65
FLC
O91
66
FLC
O91
67
FLC
O91
68
FLC
O91
71
FLC
O91
72
FLC
O91
73
FLC
O91
69
FLC
O91
70
FLC
O91
74
FLC
O91
75
(*) Schuko socket Niessen.
6/17ABB SACE
6
Boxes, equipment and various componentsIP 55 equipment and empty enclosures
IP 55 equipmentEquipped with Vimar 8000 series wiring accessories
Code Description Box/packNo items
00 520 10 A circuit breaker 10/4000 521 10 A switch 10/4000 522 10 A inverter 10/4000 523 16 A bi-polar circuit breaker 10/4000 524 10 A NO push button 10/4000 525 10 A double switch 10/40
Code Description Box/packNo items
00 530 bypass socket 2x16 A + earth 10/4000 531 double bypass socket 2x16 A + earth 10/4000 532 bipolar circuit breaker + bypass socket 2x16 A + earth 10/4000 533 Schuko socket 10/16 A + side earth 10/40
Code Description Box/packNo items
00 551 1 compartment 10/4000 552 2 compartments 10/4000 553 3 compartments 10/3000 554 4 compartments 10/2000 556 6 compartments 10/20
(*) Can be equipped with Magic BTicino wiring accessories using the adaptersupplied.
IP 55 empty enclosuresFor Vimar Idea series and Living BTicino (*) wiring accessories
Code Description Box/packNo items
00 651 1 compartment 10/4000 652 2 compartments 10/4000 654 4 compartments 10/2000 656 6 compartments 10/20
(*) Can be equipped with Living BTicino wiring accessories using the adaptersupplied.
1SLC
0010
35F
0001
1SLC
0010
36F
0001
FLC
O91
78
FLC
O91
79
FLC
O91
80
1SLC
0010
37F
0001
1SLC
0010
38F
0001
FLC
O91
81
FLC
O91
82
1SLC
0010
39F
0001
1SLC
0010
40F
0001
IP 55 empty enclosuresFor Vimar 8000 series and Magic BTicino (*) wiring accessories
6/18 ABB SACE
6
Boxes, equipment and various componentsVarious equipment and components
Technical characteristicsABB ensures a complete and varied supply of useful componen-ts to complete the installation of circuits. Some of the availablecomponents are:• wall sockets• mushroom push buttons• warning lights• flush-mounting enclosures and boxes
Overall dimensions .......................... page 10/38
FLC
O99
13
6/19ABB SACE
6
Boxes, equipment and various componentsVarious equipment and components
Code Description Box/packNo items
00 770 red mushroom push button on grey flange 8/3200 771 red mushroom push button on yellow flange 8/32
with rotating reset
Contacts : 1NO +1NCRated current (In) : 10 ARated voltage (Vn) : 380 VDimensions : 80x65x88 mm
Code Description Box/packNo items
00 570 transparent diffuser 10/3000 572 red diffuser 10/3000 573 green diffuser 10/30
Code Dimensions (mm) Box/packWxHxD No items
00 580 63x78x55 10/4000 581 128x78x55 10/20
IMQ mark in compliance with CEI 23-48 Standard.
Code Colour Description Box/packNo items
00 578 grey 3 compartments 10/4000 579 white 3 compartments 10/40
Code Description Box/packNo items
00 583 2 compartments 10/60
Code Colour Description Box/packNo items
00 585 grey cable gland x conduitsØ 16-20 mm 100/600
00 587 grey adapter x conduit clampØ 16-20 mm 100/600
00 591 grey union joint 100/60000 592 - earth terminal 100/600000 595 grey threaded connector
M16x1.5 100/60000 596 grey threaded connector
M20x1.5 100/600
IP 55 mushroom push buttonsIP 40 warning lights
IP 55 junction boxes IP 55 empty, flush-mounting enclosuresFor Vimar 8000 series and Magic BTicino wiring accessories
Flush-mounting boxesFor IP40 and IP55 equipment and empty enclosures
Connector elements
FLC
O91
89
FLC
O91
93
FLC
O91
88
FLC
O91
92
FLC
O91
90
FLC
O91
94
FLC
O91
96
FLC
O91
97
FLC
O92
64
FLC
O91
17
Equipped with E14 incandescence lamp
Wiring accessories and junctionboxes
Index
7/1ABB SACE
7
Enclosures and boxes for light prefabrication .........................................................................7/3
Wiring accessories and junction boxes in thermoplastic material ...........................................7/7
Residential/tertiary application
1SLC
0010
41F
0001
7/3ABB SACE
7
Technical characteristics• execution in self-extinguishing thermoplastic material• IP 40• installation on plastered panels, of masonite, and so on,
of 7- 35 mm thickness• possibility to accommodate the wiring accessories of the
8000 Vimar Series, Idea Vimar and BUSCH-E 2000 of ABB
Wiring accessories and junction boxesEnclosures and boxes for light prefabrication
Accessorieses ...................................... page 7/5 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/40
1SLC
0010
42F
0001
1SLC
0010
43F
0001
7/4 ABB SACE
7
Wiring accessories and junction boxesEnclosures and boxes for light prefabrication
Junction boxes
Code Description Box/packNo items
10 801 wiring accessories box 1/75 Ø 60 mm, P 45 mm(*)
10 807 wiring accessories box 1/100 Ø 60 mm, P 35 mm(*)
10 802 wiring accessories 1/50and junction box
Ø 60 mm, P 61 mm(*)10 803 junction box 1/60
increased with lidØ 74 mm, P 50 mm(*)
Code Description Box/packNo items
10 808 junction box 1/36 with lid
W 100 mm x H 100 mm x D 45 mm(*)10 811 box lid 10/540
10808, with 2 fixing screws
Code Description Box/packNo items
10 804 wiring accessories modular box 1/85W 100 mm x H 62 mm x D 40 mm(*)
10 805 wall light box 1/100with lid
W 65 mm x H 35 mm x D 40 mm(*)
(*) To make the holes, use ABB cutters: • cutter code 10840 for boxes code 10808 and 10805.• cutter code 10841 for boxes item code 10801, 1807 and 10802.• cutter code 10842 for boxes code 10803.• cutter code 10843 for boxes code 10804.
Code Description Box/packNo items
10 821 box for consumer 1/10units 8 modules
W 160 mm x H 160 mm x D 65 mm10 822 box for consumer 1/7
units 12 modulesW 235 mm x H 205 mm x D 70 mm
10 831 lid in plastic material 10/200for box 10821,
with 4 fixing screws10 832 lid in plastic material 5/100
for box 10822,with 4 fixing screws
Code Description Box/packNo items
10 833 RAL 7035 grey fronts for consumer unit 1/188 modules with DIN rail and fixing screws
10 834 RAL 7035 grey fronts for consumer unit 1/1212 modules with DIN rail and fixing screws
Boxes for consumer units Fronts for consumer units with polycarbonate transparent smokydoor
1SLC
0010
44F
0001
1SLC
0010
45F
0001
1SLC
0010
46F
0001
1SLC
0010
47F
0001
1SLC
0010
48F
0001
7/5ABB SACE
7
Wiring accessories and junction boxesAccessories for enclosures and boxes for light prefabrication
Cutters
Code Description Box/packNo items
10 840 cutter with marginal countersink 1Ø 35 mm, H adjustable(*)
10 841 cutter with marginal countersink 1Ø 68 mm, H adjustable(*)
10 842 cutter with marginal countersink 1Ø 74 mm, H adjustable(*)
10 843 cutter with marginal countersink 1Ø 62 mm, H 18 mm
(*) Adjustable for execution of holes in panels of 7 – 20 mm in thickness.
Spare ribs for cutters
Code Description Box/packNo items
10 844 spare rib for cutter 10840, H 18 mm 10/12010 845 spare rib for cutter 10841, H 18 mm 9/10810 846 spare rib for cutter 10842, H 18 mm 9/108
Spare marginal countersinks for cutters
Code Description Box/packNo items
10 847 marginal countersink for cutter 10840 10/12010 848 marginal countersink for cutter 10841 10/12010 849 marginal countersink for cutter 10842 10/12010 850 marginal countersink for cutter 10843 10/120
Helicoidal point
Code Description Box/packNo items
10851 helical point with hexagonal queue Ø 8 mm 1/10
1SLC
0010
49F
0001
1SLC
0010
50F
0001
1SLC
0010
51F
0001
1SLC
0010
52F
0001
FLC
O98
45
Residential/tertiary application
7/7ABB SACE
7
Wiring accessories and junction boxesWiring accessories and junction boxes in thermoplasticmaterial
Technical characteristics• in thermoplastic material self-extinguishing and resistant to
abnormal heat and fire up to 650 °C (glow wire test) incompliance with IEC 60695-2-1 Standard
• large push-in windows• lid in RAL 9016 with self-threaded screws included in the
supply• wiring accessories and junction boxes made in compliance
with CEI 23-48 and IEC 60 670 Standards
Accessorieses ...................................... page 7/9 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/42
FLC
O99
15
Wiring box 00 052 and junctionboxes up to code 00 078 obtainedthe IMQ mark of approval
IMQ mark
7/8 ABB SACE
7
Wiring accessories and junction boxesWiring accessories and junction boxes in thermoplasticmaterial
Truncated-conical box for wiringaccessories
Round box for wiringaccessories
Rectangular for wiringaccessories
Box for telephone jack Junction boxes
Code Description Box/packNo items
00 050 truncated-conical box 350/350Ø 65 mm
Code Description Box/packNo items
00 051 round box 230/230Ø 85 mm
Code Description Box/packNo items
00 052 rectangular box 500/500 3 wiring accessories inter. 83.5 mm00 053 rectangular box 150/150
4 wiring accessories inter. 108 mm
Code Description Box/packNo items
00 054 (*) box for telephone 189/189jacks
(*) Complete with lid.
Code Dimensioni (mm) Box/packWxHxD No items
00 075 196x152x70 1/1900 076 294x152x70 1/1500 077 392x152x70 1/1100 078 480x160x70 1/10
The separator code 00 090 can be inserted for allarticles.
Code Dimensioni (mm) Box/packWxHxD No items
00 070 92x92x45 1/10500 071 120x100x50 1/7200 072 120x100x70 1/4800 073 152x100x70 1/4200 074 160x130x70 1/32
FLC
O92
14
FLC
O92
15
FLC
O92
16
FLC
O92
17
FLC
O92
23
FLC
O92
20
FLC
O92
21
FLC
O92
24
FLC
O92
22
FLC
O92
25
7/9ABB SACE
7
Wiring accessories and junction boxesAccessories for wiring accessories and junction boxes inthermoplastic material
Code Description Box/packNo items
00 055 lid with clips 25/250for Ø 65 mm box
00 056 lid with clips 20/160for Ø 85 mm box
Spare lids for wiring accessories boxes
Code Description Box/packNo items
00 059 rectangular lid 20/300for box inter. 83.5 mm
Code Box/packNo items
00 090 100/400
Code For boxes Box/packtype No items
00 091 00 070 20/20000 092 00 071 – 00 072 20/16000 093 00 073 10/10000 094 00 074 10/8000 095 00 075 10/4000 096 00 076 10/4000 097 00 077 10/4000 098 00 078 10/40
All codes complete with self-tapping screws.
Spare covers for junction boxes Separator for junction boxes
FLC
O92
18
FLC
O92
19
FLC
O92
72
FLC
O92
71
Installation material
Index
8/1ABB SACE
8
Metal rails ................................................................................................................................8/2
Cable-ties and spirals .............................................................................................................8/4
Polyamide wall plugs ..............................................................................................................8/8
Steel wall plugs .......................................................................................................................8/9
Fastening elements ...............................................................................................................8/10
8/2 ABB SACE
8
Installation materialMetal rails
Technical characteristics• made from cold-rolled steel strips• electric zinc plated with subsequent passivation and tropicali-
sation with a minimum thickness of zinc (6/8 microns) deposi-ted over the entire surface.
• axial dimples on the rails without holes, to facilitate the drillingof installation holes
• strict control of the dimensions as required by the StandardsEN 50035, DIN 46277/1 and EN 50022, DIN 46277/3
• application area: industrial
CENELEC-EN 50022 railH 7.5
Code Dimensions (mm) Length Box/packBxbxHxS (*) (m) (m)
12 839 35x27x7.5x1 2 20/40
CENELEC-EN 50022 railH 15
Code Dimensions (mm) Length Box/packBxbxHxS(*) (m) (m)
12 840 35x27x15x1.5 2 2/20
CENELEC-EN 50035 railH 15
Code Dimensions (mm) Length Box/packBxbxHxS(*) (m) (m)
12 841 32x16.5x15x1.5 2 2/20
Code Dimensions (mm) Length Box/packBxbxHxS(*) (m) (m)
12 849 35x27x7.5x1 2 2/40
CENELEC-EN 50022 rail with holesH 7.5
CENELEC-EN 50022 rail with holesH 15
Code Dimensions (mm) Length Box/packBxbxHxS(*) (m) (m)
12 850 35x27x15x1.5 2 2/20
CENELEC-EN 50022 rail with holesH 15
Code Dimensions (mm) Length Box/packBxbxHxS(*) (m) (m)
12 853 32x16.5x15x1.5 2 2/20
Accessories .......................................... page 8/3 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/44
FLM
I900
2
FLM
I900
3
FLM
I900
4
FLM
I900
5
FLM
I900
6
FLM
I900
7
(*) B= external base; b= internal base; H= height of rail; S= thickness of rail.
8/3ABB SACE
8
Installation materialAccessories for metal rails
Universal metal connectorUniversal plastic connector
Plastic base for wiring ductsSupporting bracket for metal rails
Code Box/packNo items
12 892 50/300
Code Box/packNo items
05 210 100/200
Code Box/packNo items
12 893 50/3000
Code Box/packNo items
12 828 50/150012 829 50/1500
FLM
I901
0
FLM
I901
1
FLM
I904
2
FLM
I900
8
FLM
I900
9
12 82812 829
8/4 ABB SACE
8
Installation materialCable-ties and spirals
Technical characteristicsPolyamide cable-ties 6/6• available in two versions:- transparent- carbon black, UV resistant• operating temperature from -40 °C to +85 °C• self-extinguishing class according to UL 94: V2• softening point VICAT (50N): 238 °C• dielectric rigidity 23,000 V/mm• strong resistance to bases, greases, hydrocarbons, acetone
and chlorates• soluble in phenolic and formic acids• limited resistance to concentrated acids• flexing resistance: 90 MPa• traction module: 3030 MPa• resilience to 20 °C: 5,4 kJ/m2• yield strength: 83 MPa• elongation to breaking: 70%• cable-ties made according to regulations MIL-S-23190 and
IEC 92-101• tightening is easy without tearing thanks to the special pitch of
the indentations• the side edges have anti-scratching protection so as not to
damage the hands of the operator and not to nick the cableinsulation
• rounded point to ease insertion in the countersunk head• available in boxes of 100 to 1000 items• particularly suited to the cabling of control panels• type approval Italian Naval Register ELE/8998/1• application area: tertiary/industrial
Accessories .......................................... page 8/6 Technical details ............................... page 9/1 Overall dimensions ....................... page 10/44
FLM
I901
2Type approval Italian NavalRegister ELE/8998/1
Polyamide cable-ties• available in black, UV resistant• operating temperature from -40 °C to +65 °C• made in UV resistant material• self-extinguishing class according to UL 94: HB• strong resistance to bases, greases, hydrocarbons, acetone
and chlorates• soluble in phenolic and formic acids• limited resistance to concentrated acids• flexing resistance: 40 Mpa• traction module: 950 Mpa• ultimate tensile tearing strenght: 55 Mpa• resilience to 20 °C: 83 kJ/m2• yield strength: 50 Mpa• elongation to breaking : >100%• softening point VICAT (50N): 221 °C• high resistance to tearing thanks to the special tightening
mechanism• the side edges have anti-scratching protection so as not to
damage the hands of the operator and not to nick the cableinsulation
• available in boxes of 100 items• particularly suited to external use• application area: tertiary/industrial
Spirals• available in two versions:- transparent polyethylene- self-extinguishing polyethylene• suitable for forming bundles of cables and for making cabling
look neat and tidy• they mechanically protect the conductors allowing them to
exit from any point through the coils• application area: tertiary/industrial
8/5ABB SACE
8
Installation materialCable-ties and spirals
Code Dimensions (mm) Resistance to Ø tightening No items Box/packWxL tensile strength (N)(*) min.(mm)max.(mm)
18 010 100x2.5 82 2 24 100 1/8018 011 135x2.5 82 2 35 100 1/6018 013 160x2.5 82 2 42 100 1/5018 012 140x3.5 135 2.5 36 100 1/5018 014 200x3.5 135 2.5 55 100 1/4018 017 280x3.5 135 2.5 80 100 1/3018 015 180x4.5 225 3 45 100 1/3018 018 280x4.5 225 5 76 100 1/2518 020 360x4.5 225 5 101 100 1/1518 024 200x7.5 533 5 51 100 1/2018 026 280x7.5 533 5 76 100 1/2018 028 360x7.5 533 5 102 100 1/2018 034 430x9.0 781 5 110 100 1/2018 036 550x9.0 781 5 140 100 1/2018 038 780x9.0 781 5 190 100 1/8
18 060 100x2.5 82 2 24 1000 1/1518 061 135x2.5 82 2 35 1000 1/1518 063 160x2.5 82 2 42 1000 1/1018 062 140x3.5 135 2.5 36 1000 1/1018 064 200x3.5 135 2.5 55 1000 1/5
(*) N = [Newton]
6/6 transparent polyamide cable-ties
Code Dimensions (mm) Resistance to Ø tightening No items Box/packWxL tensile strength (N)(*) min.(mm)max.(mm)
18 110 100x2.5 82 2 24 100 1/8018 111 135x2.5 82 2 35 100 1/6018 113 160x2.5 82 2 42 100 1/5018 112 140x3.5 135 2.5 36 100 1/5018 114 200x3.5 135 2.5 55 100 1/4018 117 280x3.5 135 2.5 80 100 1/3018 115 180x4.5 225 3 45 100 1/3018 118 280x4.5 225 5 76 100 1/2518 120 360x4.5 225 5 101 100 1/1518 124 200x7.5 533 5 51 100 1/2018 126 280x7.5 533 5 76 100 1/1018 128 360x7.5 533 5 102 100 1/2018 134 430x9.0 781 5 110 100 1/2018 136 550x9.0 781 5 140 100 1/2018 138 780x9.0 781 5 190 100 1/8
18 160 100x2.5 82 2 24 1000 1/1518 161 135x2.5 82 2 35 1000 1/1518 163 160x2.5 82 2 42 1000 1/1018 162 140x3.5 135 2.5 36 1000 1/1018 164 200x3.5 135 2.5 55 1000 1/5
(*) N = [Newton]
6/6 black polyamide cable-ties
Code Dimensions (mm) Resistance to Ø tightening No items Box/packWxL tensile strength (N)(*) min.(mm) max.(mm)
18 210 115x6 240 5 22 100 1/3018 212 175x6 280 10 40 100 1/2018 218 115x9 350 5 22 100 1/2018 220 190x9 350 10 45 100 1/2018 222 265x9 510 15 63 100 1/1018 224 360x9 510 25 93 100 1/8
(*) N = [Newton]
Polyamide cable-ties for external use Spirals
Code Dimensions (mm)(*) For bundle of cables Ø No items Box/packØ x a min. (mm) max. (mm)
In transparent polyethylene18 370 3x5 2 12 25 1/1018 372 6x8 5 56 25 1/1218 374 10x11 12 100 25 1/418 376 12x13 14 130 25 1/4In self-extinguishing polyethylene18 380 3x5 2 12 50 1/1018 382 6x8 5 56 50 1/1218 384 10x11 12 100 50 1/418 386 12x13 14 130 50 1/4
(*) Ø = diameter a= width of spiral
FLM
I901
5
FLM
I901
6
FLM
I901
7
FLM
I901
4
8/6 ABB SACE
8
Installation materialAccessories for cable-ties
Self-adhesive supports for cable-ties
Code Description No items Box/pack18 250 transparent plate 50 1/3018 251 black plate 50 1/30
For cable-ties 2.4-4.8 mm wide.Made in 6/6 transparent or black polyamide.Fast to mount due to its self-adhesive snap on base or it can be fixed with acentral Ø 4 mm screw.
Code Box/packNo items
18 270 1/300
For tightening and cutting cable-ties 2.4-4.8 mm wide.Made in thermoplastic, shock proof material with internal steel mechanism.Tightening tension can be adjusted by a special nut above the handle.
Screw supports for cable-ties
Code Description No items Box/pack18 252 transparent plate 100 1/6018 253 black plate 100 1/60
For cable-ties 2..4-4.8 mm wide.Made in 6/6 transparent or black polyamide.Fix with Ø 4 mm o screw or Ø 2 mm.
Pincer for cable-ties Screw supports for external cable-ties
Code Description No items Box/pack18 280 black plate 25 1/60
For cable-ties 6-9 mm wide.Made in 6/6 black polyamide.Fix with screw wall-plug max Ø 8 mm or with a nail.
FLM
I901
9
FLM
I902
0
FLM
I902
1
1SLC
0010
59F
0001
8/7ABB SACE
8
Installation materialAccessories for cable-ties
Code Box/packNo items
18 290 1/150
For tightening and cutting cable-ties 6-9 mm wide.Made in painted metal.
Pivot support for external cable-ties
Pincer for external cable-ties
Code Description No items Box/pack18 282 black plate 25 1/60
For cable-ties 6-9 mm wide.Made in 6/6 black polyamide.
FLM
I902
2
FLM
I902
3
8/8 ABB SACE
8
Installation materialPolyamide wall plugs
Technical characteristics• wall-plugs made in 6/6 polyamide• available in RAL 7035 grey and RAL 9001 white• wall plugs with nickel-plated steel Allen screws• resistant to atmospheric agents, gas and ageing• don’t change in temperatures ranging from -30 °C and +90 °C• suitable for use with various materials (from cement to wood) with
a high holding level
Dimensions (mm)Code Colour wall plug screws No items Box/pack
diam. diam. x L18 415 grey 5 3.5 x 25 100 1/3018 416 grey 6 4 x 30 100 1/3018 418 grey 8 5 x 40 50 1/3018 420 grey 10 6 x 50 50 1/30
Wall plugs Wall plugs with screws
Code Colour Dimensions (mm) No items Box/packdiam.x L
18 405 grey 5x25 200 1/6018 406 grey 6x30 100 1/6018 408 grey 8x40 100 1/3018 410 grey 10x50 50 1/30
Dimensions (mm)Code Colour wall plug screws No items Box/pack
diam. diam. x L18 430 white 5 3.5 x 27 100 1/3018 432 white 6 4 x 35 100 1/3018 434 white 6 4 x 55 50 1/3018 436 white 8 5 x 70 50 1/3018 440 white 8 5 x 72 50 1/30
For quick fixing.Expansion with hammering of the nail/screw, can be unscrewed.With a neck to hold the element to be fastened.
Wall plugs with nail/screw
Code Colour Description No items Box/pack
18 450 grey screw M4 50 1/3018 452 grey short angled hook M4 50 1/3018 454 grey medium angled hook M4 50 1/3018 456 grey open angled hook M4 50 1/1218 458 grey closed angled hook M4 50 1/12
Hooks nickel-plated steel.Thread M4 – hole Ø 9x36 mm.
Wall plugs with hooks
Technical details .................................. page 9/1 Overall dimensions ....................... page 10/44
FLM
I902
4
FLM
I902
5
FLM
I902
6
FLM
I902
7
8/9ABB SACE
8
Installation materialSteel wall plugs
Technical characteristics• screw anchors made in burnished passivated zinc• thread M4 – hole Ø 8x42 mm• thread M5 – hole Ø 10x50 mm• suitable for use with masonry (in cement, tiles etc.)
Code Description No items Box/pack18 460 screw with M4 Philips countersunk head 50 1/3018 461 screw with M5 Philips countersunk head 50 1/3018 464 short angled hook M4 50 1/3018 465 short angled hook M5 25 1/3018 466 medium angled hook M4 50 1/3018 467 medium angled hook M5 25 1/3018 470 hook with open eyelet M4 50 1/3018 471 open angled hook M5 25 1/3018 472 hook with closed eyelet M4 50 1/3018 473 hook with closed eyelet M5 25 1/30
Wall plugs with hooksWith washer
Code Description No items Box/pack18 476 flat hook M4 50 1/3018 477 flat hook M5 25 1/3018 478 medium angled hook M4 25 1/3018 479 medium angled hook M5 25 1/30
Wall plugs with hooksWith washer
Code Description No items Box/pack18 486 screw with hexagonal head M6x50 20 1/3018 487 screw with hexagonal head M8x55 10 1/3018 488 screw with hexagonal head M10x60 10 1/3018 489 screw with hexagonal head M10x70 5 1/30
Wall anchorsThread M4 – hole Ø14
Code Description No items Box/pack18 490 screw with M4 Philips countersunk head 10 1/3018 492 M4 head 10 1/3018 494 hook with open eyelet M4 10 1/3018 496 hook with closed eyelet M4 10 1/30
Screws with wall plugs
Technical details .................................. page 9/1 Overall dimensions ....................... page 10/44F
LMI9
028
FLM
I902
9
FLM
I903
0
FLM
I903
1
8/10 ABB SACE
8
Installation materialFastening elements
Technical characteristicsIn order to simplify and speed up the laying of conduits andcables in any situation, the following products are available:• thermo-plastic snap-on and collar conduit holders• thermo-plastic U-bolt conduit holders• conduit holder guides• thermo-plastic strap holders• thermo-plastic cable holders• steel conduit holders• thermo-plastic and steel collar conduit holders
Code Colour For conduits Ø No items Box/pack(mm)
05 694 grey 12–16 50 1/1205 695 grey 16–25 50 1/1205 696 grey 25–32 20 1/1205 697 grey 32–40 15 1/1205 698 grey 40–50 10 1/12
Self-extinguishing thermo-plastic.Fixed to the wall using a wall-plug or a suitable guide.
Snap-on conduit holders
Code Colour For conduits Ø No items Box/pack(mm)
05 700 grey 16 100 1/1205 701 grey 20 100 1/1205 702 grey 25 50 1/1205 703 grey 32 25 1/1205 704 grey 40 25 1/12
Self-extinguishing thermo-plastic.Fixed to the wall using a wall-plug or a suitable guide.
Collar conduit holders
Code Colour For conduits Ø No items Box/pack(mm)
05 720 grey 16 100 1/1205 721 grey 20 50 1/1205 722 grey 25 50 1/1205 723 grey 32 25 1/12
Self-extinguishing thermo-plastic.Fixed to the wall using a wall-plug or a suitable guide.
U-bolt conduit holders
Code Colour For straps No items Box/packBxH (mm)
05 760 grey 6x3.5 200 1/6005 761 grey 8x3.5 200 1/6005 762 grey 11x5 100 1/6005 763 white 6x3.5 200 1/6005 764 white 8x3.5 200 1/6005 765 white 11x5 100 1/60
Self-extinguishing thermo-plastic.
Strap holders
• self-extinguishing insulated poly-carbonate cable-clamps• thermo-plastic fastening elements resistant to abnormal heat
and fire up to 650 °C (glow wire test) in compliance with theIEC 60695-2-1 Standard
• thermo-plastic fastening elements with operating conditionsfrom -30 °C to +70 °C
• application area: tertiary/residential
Technical details .................................. page 9/1 Overall dimensions ....................... page 10/44
FLM
I903
3
FLM
I903
3
FLM
I903
5
FLM
I903
9
8/11ABB SACE
8
Installation materialFastening elements
Conduit clamps
Code For conduits Ø No items Box/pack(mm)
05 730 10 100 1/3005 731 12 100 1/3005 732 13 100 1/3005 733 14 100 1/3005 734 16 50 1/3005 735 19–20 50 1/3005 736 22 50 1/3005 737 25–26 50 1/1205 738 32 50 1/1205 739 38 25 1/1205 740 40 25 1/1205 741 50 25 1/12
In galvanised steel.
Conduit clamp collars
Code For conduits Ø No items Box/pack(mm)
05 745 10 50 1/3005 746 12 50 1/3005 747 13 50 1/3005 748 14 50 1/3005 749 16 50 1/3005 750 19–20 25 1/3005 751 22 25 1/3005 752 25–26 25 1/3005 753 32 25 1/1205 754 38 25 1/1205 755 40 25 1/1205 756 50 25 1/12
In galvanised steel.
Code Clamping capacity No items Box/pack(mm2)
05 950 4 100 1/3005 951 10 50 1/3005 952 16 25 1/30
Self-extinguishing poly-carbonate.Operating temperature from -30 °C to +85 °C.Brass clamps.
Rail for conduit-clamps
Code Box/pack05 727 1/1
Self-extinguishing thermo-plastic.Supplied in sections of 400 pieces from 200 mm.
Insulated cable-clamps
Cable holders
Code Colour For conduits and cables No items Box/packØ (mm)
05 770 grey 4 200 1/6005 771 grey 5 200 1/6005 772 grey 6 200 1/6005 773 grey 7 100 1/6005 774 grey 8 100 1/6005 775 grey 9 100 1/3005 776 grey 10 100 1/3005 777 grey 12 100 1/3005 778 grey 13 100 1/3005 779 grey 14 100 1/3005 780 grey 16 50 1/3005 781 grey 19–20 25 1/3005 782 grey 22 25 1/3005 783 grey 25–26 25 1/1205 784 grey 32 25 1/1205 788 white 4 200 1/6005 789 white 5 200 1/6005 790 white 6 200 1/6005 791 white 7 100 1/6005 792 white 8 100 1/6005 793 white 9 100 1/6005 794 white 10 100 1/3005 795 white 12 100 1/3005 796 white 13 100 1/30
Self-extinguishing thermo-plastic.
FLM
I903
7
FLM
I903
8
FLM
I903
6
FLM
I904
0
FLM
I904
1
Further technical informationand applications
Index
9/1ABB SACE
9
Definition of IP protection degree, IK degree of mechanical
shock protection, double insulation and self-extinguishing protection degree ........................9/2
Consumer units for modular circuit breakers – summarised technical data ...........................9/4
Switchboards and boxes – reaction to chemical agents ....................................................... 9/11
Possible configurations of terminal holders – terminal bars for consumer units ...................9/12
Enclosures and boxes for light prefabrication .......................................................................9/15
Mounting examples and functional details ............................................................................9/16
Branch connection using the bi-material flange ....................................................................9/22
9/2 ABB SACE
9
Further technical information and applicationsDefinition of IP protection degree, IK protection degree of mechanicalshock protection, double insulation and self-extinguishing protection degree
IP protection degree for enclosures
Degree of mechanical shock protection IK conforming to the CEI EN 50102 Standard
Code Shock energyIK (Joule)00 not protected01 0.15 Joule02 0.2 Joule03 0.35 Joule04 0.5 Joule05 0.7 Joule06 1 Joule07 2 Joule08 5 Joule09 10 Joule10 20 Joule
Text equipment used includesa spring hammer, a pendulumhammer and a vertical hammer.
IP
0
1
2
3
4
5
6
IP
0
1
2
3
4
5
6
7 15 cm
60
15
ø 1 mm
ø 2,5 mm
ø 12 mm
ø 50 mm
8
No protection
Protection against the penetrationof solid bodies with a diameter ofover 50 mm
Protection against the penetrationof solid bodies with a diameter orthickness of over 2.5 mm
1st number defined by Standards CEI 70-1 – IEC 60529
No protection
Protection against the penetrationof drops of water falling vertically
Protection against the penetrationof splashes of water from alldirections
2nd number defined by Standards CEI 70-1 - IEC 60529
Protection against the penetration ofsolid bodies with a diameter of over12 mm or a length of over 80 mm
Protection against the penetrationof solid bodies with a diameter orthickness of over 1.0 mm
Protection against the penetrationof dusts
Total protection against thepenetration of dusts
Protection against the penetrationof drops of water falling at anangle of up to 15° from vertical
Protection against the penetrationof drops of water falling at anangle of up to 60° from vertical
Protection against the penetrationof water sprayed by a hose fromall directions
Protection against the penetrationof sea water
Protection against the penetrationof water during temporaryimmersion
Protection against the penetrationof water during continual immer-sion
1SLC
8050
41F
0001
First number: protection against thepenetration of solid bodies
Second number: protection against thepenetration of water
9/3ABB SACE
9
Further technical information and applicationsDefinitions of IP protection degree, IK degree of mechanical shock protection,double insulation and self-extinguishing protection
Double insulation IP 40 protection degree
This symbol shown on the consumer units/switchboards/boxes/enclosures indicates that they have been constructed so thatthey will provide protection against indirect contacts by means
of complete insulation. To this end they must be installed correctly, fol-lowing the instructions that accompany the product and using the acces-sories supplied (screw covering caps).
In a consumer unit, protection degree IP 40 (it is impossible to introduce awire with a diameter of 1 mm) is obtained by installing equipment withprotection degree IP 40 and by using the relative accessories (module-covers).
1st characteristic Brief Fullnumber description description
0 No protection No protection is provided1 Protection against the It must be impossible for
penetration of solid a large surface area,bodies with a diameter for example, the hand, to penetrateof over 50 mm (voluntary protection is not
provided, however) or solid bodieslarger than 50 mm in diameter
2 Protected against It must be impossible for thesolid bodies larger fingers or similar objects with a
maximum length of 80 mm or solidbodies with a diameter greaterthan 12 mm, to penetrate
3 Protected against It must be impossible for tools,solid bodies wires, etc. with a diameter orlarger than 2.5 mm thickness greater than 2.5 mm or
solid bodies with a diametergreater than 2.5 mm, to penetrate
4 Protected against It must not be possible for wires orsolid bodies larger plates with a thickness greaterthan 1.0 mm than 1.0 mm or solid bodies with a
diameter greater than 1.0, topenetrate
5 Dust proof Not totally dust proof, but thequantity that penetrates is not suchto prevent the material fromfunctioning well
6 Totally dust proof No dust can penetrate
2st characteristic Brief Fulldigit description description
0 No protection No protection is provided1 Protected against Vertically-falling drops of water
drops of water must not cause damage
2 Protected against Vertically-falling drops of waterdrops of water falling will not cause damage whenwith a maximum angled at a maximum of 15°angle of 15° from vertical
3 Rain proof Rain water falling from a directioncreating a maximum angle of 60°from vertical must not causedamage
4 Protected against Water sprayed onto the coveringsprays of water from any direction must not cause
damage5 Protected against Water projected with a nozzle
jets of water from all directs must not causedamage
6 Protected against In the case of waves or powerfulwaves water jets must not penetrate
the covering in harmfulquantities
7 Protected against Harmful quantities of water mustthe effects not penetrate inside the immersedof temporary covering in specific conditions ofimmersion pressure or duration
8 Protected against The material is suitable to remainthe effect of constantly immersed in water in thecontinuous conditions specified by theimmersion manufacturer
Test text Equipment Compliance Purpose Test results Test conditionsrequired with Standards of the test Heat Length Characteristic
source of test elementsUL UL 94 A classification is given V0 if the test specimen burns for less Bunsen Flame Duration
(UNDERWRITERS’ to the various types of than 5 seconds before going out burner applied of combustionLABORATORIES) behaviour that the materials V1 if it burns for less than flame for
may have following contact 25 seconds 10 sec 10 secondswith the Bunsen flame V2 if it burns for less than and for two
25 seconds, dripping glowing consecutivematerial timesHB if it burns for more than25 seconds (horizontal testspecimen with a maximumburning speed of 38 mmper minute)Can be assimilated withASTM D-635
(GLOW-WIRE TEST) IEC 695-2-1 Simulates the types of Any manifestation of a flame Glow-wire Wire Time it takesCEI 50-11 thermal stress that may must stop within 30 seconds 4 mm in applied for the flame
be produced by the sources of removing the glow-wire diameter for 30 to extinguishof heat or ignition (glowing TEST TEMPERATURES secondselements or overcharged 650 °Cresistors for short periods) 750 °Cin order to assess the 850 °Cdanger of fire using this 960 °Csimulation
PROTECTION AGAINST THE PENETRATION OF SOLID BODIES PROTECTION AGAINST THE PENETRATION OF WATER
VLC
O00
52V
LCO
0053
Self-extinguishing protection degree
Protection against thepenetration of solid bodieswith a diameter of over12 mm or a length of over80 mmProtection against thepenetration of solid bodieswith a diameter orthickness of over 2.5 mm
Protection against thepenetration of solid bodieswith a diameter or thicknessof over 1.0 mm
Protection against thepenetration of dusts
Total protection againstthe penetration of dusts
Protection against thepenetration of drops ofwater falling vertically
Protection against thepenetration of drops ofwater falling at an angleof up to 15° from verticalProtection against thepenetration of drops ofwater falling at an angle ofup to 60° from verticalProtection against thepenetration of splashes ofwater from all directionsProtection against thepenetration of watersprayed by a hose fromall directions
Protection against thepenetration of seawater
Protection against thepenetration of waterduring temporaryimmersionProtection against thepenetration of waterduring continualimmersion
9/4 ABB SACE
9
Further technical information and applicationsConsumer units for modular circuit breakers – summarisedtechnical data
Flush-mounting consumer units IP 40 Estetica Series without door
CODE 1SL2004A00 1SL2008A00 1SL2012A00 1SL2013A00 1SL2014A00 1SL2016A00NUMBER OF MODULES 4 8 12 18 24 36COLOUR RAL 9016 RAL 9016 RAL 9016 RAL 9016 RAL 9016 RAL 9016
white white white white white whiteWITHOUT DOOR YES YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YES YESRESISTANCE TO HEAT GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °CTYPE OF MATERIAL Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plasticSHOCK RESISTANCE 6 Joule 6 Joule 6 Joule 6 Joule 6 Joule 6 JouleOPERATING TEMPERATURE -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °CPROTECTION DEGREE IP 40 IP 40 IP 40 IP 40 IP 40 IP 40MAX DISSIPATION POWER(1) 25 W 37 W 40 W 55 W 72 W 96 WEXTRACTABLE FRAME - YES YES YES YES YES
DESIGNED FOR RAPID CABLING - UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Flush-mounting consumer units IP 40 Unibox Series
CODE 1SL0500A00(1) 1SL0501A00(1) 1SL0502A00(1) 1SL0503A00(1) 1SL0504A00(1)
1SL0510A00(2) 1SL0511A00(2) 1SL0512A00(2) 1SL0513A00(2) 1SL0514A00(2)
NUMBER OF MODULES 8 12 24 36 54COLOUR RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 whiteDOUBLE INSULATION YES YES YES YES YESRESISTANCE TO HEAT GWT 650 °C GWT 650 °C GWT 650 °C GWT 65 °C GWT 650 °CTYPE OF MATERIAL Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plasticSHOCK RESISTANCE 10 Joule 10 Joule 10 Joule 10 Joule 10 JouleOPERATING TEMPERATURE -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °CPROTECTION DEGREE IP 40 IP 40 IP 40 IP 40 IP 40MAX DISSIPATION POWER(3) 25 W 29 W 45 W 68 W 85 WEXTRACTABLE FRAME YES YES YES YES YES
DESIGNED FOR RAPID CABLING UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL
(1) With opaque door.(2) With transparent door.(3) Data concerning dissipation power have been obtained by following the instructions of CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Co
ld w
ater
Ho
t w
ater
Sul
phu
ric
acid
40%
Hyd
roch
lori
c ac
id 3
5%
Ace
tic
acid
10%
Ben
zole
Gas
olin
e
Ace
tone
Eth
yl a
lcco
hol
Am
mo
nia
liqui
d
Dic
hlo
rom
etha
ne
Die
sel o
il- n
apht
a
Min
eral
oils
and
gra
ses
Foo
d o
ils a
nd g
rase
s
Per
chlo
roet
hyle
ne
Tric
hlo
roet
hyle
ne
Eth
ylet
her
Ozo
ne
Tolu
ene
Met
hano
l
Sp
irit
s
Milk
Frui
t ju
ices
Fluo
rid
e hy
dro
carb
ons
Lye-
was
hes
Cle
ansi
ngs
Wat
er s
olu
tio
n
IP 40 Estetica and EuropaSeries flush-mountingconsumer units
resistant partially resistant not resistant
Reaction to chemical agents (*)
(*) Indications concerning theresistance of the products tochemical agents must beconsidered as an indication only,and refer to standard conditions(40 °C, integral product).
VLC
O00
54
9/5ABB SACE
9
CODE 1SL2024A00 -12 037 1SL2038A00 - 12 038 1SL2032A00 - 12 042 1SL2033A00 - 12 043 1SL2034A00 - 12 044 1SL2036A00 - 12 046 1SL2052A00 -12 0351SL2040A00 - 12 026 1SL2004A00 - 12 027 1SL2045A00 - 12 030 1SL2048A00 - 12 031 1SL2067A00 -12 0681SL2057A00 - 12 058 1SL2061A00 - 12 062 1SL2063A00 - 12 064 1SL2065A00 - 12 066
NUMBER OF MODULES 4 8 12 18 24 36 54COLOUR RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white
RAL 7024 grey RAL 7024 grey RAL 7024 grey RAL 7024 grey RAL 7024 grey RAL 7024 grey RAL 7035 greyRAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey
WITH TRANSPARENT DOOR YES YES YES YES YES YES YESWITH OPAQUE DOOR - YES YES - YES YES YESDOUBLE INSULATION YES YES YES YES YES YES YESRESISTANCE TO HEAT GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °CTYPE OF MATERIAL Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plasticSHOCK RESISTANCE 6 Joule 6 Joule 6 Joule 6 Joule 6 Joule 6 Joule 6 JouleOPERATINGTEMPERATURE -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °CPROTECTION DEGREE IP 40 IP 40 IP 40 IP 40 IP 40 IP 40 IP 40MAX DISSIPATIONPOWER (1) 19 W 25 W 29 W 40 W 45 W 68 W 85 WEXTRACTABLE FRAME - YES YES YES YES YES YESDESIGNED FORRAPID CABLING - UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Flush-mounting consumer units IP 40 Estetica Series with door and Europa Series consumer unitsunits
Further technical information and applicationsConsumer units for modular circuit breakers – summarisedtechnical data
9/6 ABB SACE
9
Further technical information and applicationsConsumer units for modular circuit breakers – summarisedtechnical data
CODE 12 208 – 12 228 12 212 – 12 232 12 214 – 12 234 12 216 – 12 236 12 217 – 12 237NUMBER OF MODULES (1) 8 + 1 12 + 1 24 + 2 36 + 3 54 + 3COLOUR RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white
RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITHOUT DOOR YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YESRESISTANCE TO HEAT GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °CTYPE OF MATERIAL Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plasticSHOCK RESISTANCE 10 Joule (IK 09) 10 Joule (IK 09) 10 Joule (IK 09) 10 Joule (IK 09) 10 Joule (IK 09)OPERATING TEMPERATURE -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °CPROTECTION DEGREE IP 40 IP 40 IP 40 IP 40 IP 40MAX DISSIPATION POWER (2) 22 W 34 W 58 W 70 W 83 WCABLE HOLDING SYSTEM YES YES YES YES YESDESIGNED FOR INPUT CONDUITS Ø 25÷32 mm CONDUITS Ø 25÷32 mm CONDUITS Ø 25÷32 mm CONDUITS Ø 25÷32 mm CONDUITS Ø 25÷32 mm
TRUNKINGS TRUNKINGS TRUNKINGS TRUNKINGS TRUNKINGSup to 200X60 mm up to 200X60 mm up to 200X60 mm up to 200X60 mm up to 200X60 mm
EXTRACTABLE FRAME - - YES YES YESDESIGNED FOR RAPID CABLING UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL
(1) Extra modules see characteristics on page 2/23.(2) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Wall-mounting consumer units IP 40 Unibox Series without door
12 238 – 12 248 12 242 – 12 252 12 244 – 12 254 12 246 – 12 256 12 247 – 12 257CODE 12 258 – 12 268 12 262 – 12 272 12 264 – 12 274 12 266 – 12 276 12 267 – 12 277NUMBER OF MODULES 8 + 1 12 + 1 24 + 2 36 + 3 54 + 3COLOUR RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white
RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITHOUT DOOR - - - - -WITH TRANSPARENT DOOR YES YES YES YES YESWITH OPAQUE DOOR YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YESRESISTANCE TO HEAT GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °CTYPE OF MATERIAL Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plasticSHOCK RESISTANCE 10 Joule (IK 09) 10 Joule (IK 09) 10 Joule (IK 09) 10 Joule (IK 09) 10 Joule (IK 09)OPERATING TEMPERATURE -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °CPROTECTION DEGREE IP 40 IP 40 IP 40 IP 40 IP 40MAX DISSIPATION POWER (1) 20 W 30 W 40 W 45 W 54 WCABLE HOLDING SYSTEM YES YES YES YES YESDESIGNED FOR INPUT CONDUITS Ø 25÷32 mm CONDUITS Ø 25÷32 mm CONDUITS Ø 25÷32 mm CONDUITS Ø 25÷32 mm CONDUITS Ø 25÷32 mm
TRUNKINGS TRUNKINGS TRUNKINGS TRUNKINGS TRUNKINGSup to 200X60 mm up to 200X60 mm up to 200X60 mm up to 200X60 mm up to 200X60 mm
EXTRACTABLE FRAME - - YES YES YESDESIGNED FORRAPID CABLING UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL
(1) Extra modules see characteristics on page 2/23.(2) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Wall-mounting consumer units IP 40 Unibox Series with door
IP 40 Unibox and EuropaSeries wall-mountingconsumer units and IP 40wall-mounting covers
Co
ld w
ater
Ho
t w
ater
Sul
phu
ric
acid
40%
Hyd
roch
lori
c ac
id 3
5%
Ace
tic
acid
10%
Ben
zole
Gas
olin
e
Ace
tone
Eth
yl a
lcco
hol
Am
mo
nia
liqui
d
Dic
hlo
rom
etha
ne
Die
sel o
il- n
apht
a
Min
eral
oils
and
gra
ses
Foo
d o
ils a
nd g
rase
s
Per
chlo
roet
hyle
ne
Tric
hlo
roet
hyle
ne
Eth
ylet
her
Ozo
ne
Tolu
ene
Met
hano
l
Sp
irit
s
Milk
Frui
t ju
ices
Fluo
rid
e hy
dro
carb
ons
Lye-
was
hes
Cle
ansi
ngs
Wat
er s
olu
tio
n
resistant partially resistant not resistant
Reaction to chemical agents (*)
(*) Indications concerning theresistance of the products tochemical agents must beconsidered as an indication only,and refer to standard conditions(40 °C, integral product).
VLC
O00
55
9/7ABB SACE
9
1SL2402A00 1SL2404A00 1SL2406A00 1SL2408A00 1SL2412A00 1SL2414A00 1SL2416A00 1SL2417A00CODE 12 422 12 424 12 426 12 428 12 432 12 434 12 436 12 437NUMBER OF MODULES 2 4 6 8 12 24 36 54COLOUR RAL 9016 RAL 9016 RAL 9016 RAL 9016 RAL 9016 RAL 9016 RAL 9016 RAL 9016
white white white white white white white whiteRAL 7035 RAL 7035 RAL 7035 RAL 7035 RAL 7035 RAL 7035 RAL 7035 RAL 7035
grey grey grey grey grey grey grey greyWITHOUT DOOR YES YES YES YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YES YES YES YESRESISTANCE TO HEAT GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °CTYPE OF MATERIAL Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plasticSHOCK RESISTANCE 6 Joule 6 Joule 6 Joule 6 Joule 6 Joule 6 Joule 6 Joule 6 JouleOPERATING TEMPERATURE -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +8 °CPROTECTION DEGREE IP 40 IP 40 IP 40 IP 40 IP 40 IP 40 IP 40 IP 40MAX DISSIPATION POWER (1) 10 W 14 W 16 W 22 W 28 W 50 W 72 W 96 WDESIGNED FOR INPUT - - - CONDUITS CONDUITS CONDUITS CONDUITS Direct branch
Ø 25÷32 mm Ø 25÷32 mm Ø 25÷32 mm Ø 25÷32 mm connectionTRUNKINGS up toTRUNKINGS up to TRUNKINGS up toTRUNKINGS up to Conduits-cables
200X60 mm 200X60 mm 200X60 mm 200X60 mm Ø 5÷35 mmDESIGNED FOR MOULDED-CASECIRCUIT BREAKERS - - - - - - YES YESDESIGNED FORRAPID CABLING - - - UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX L
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Covers and wall-mounting consumer units IP 40 Europa Series without door
Further technical information and applicationsConsumer units for modular circuit breakers – summarisedtechnical data
1SL2438A00 – 12 448 1SL2442A00 – 12 452 1SL2444A00 – 12 454 1SL2446A00 – 12 456 1SL2447A00 – 12 457CODE 12 458 – 12 468 12 462 – 12 472 12 464 – 12 474 12 466 – 12 476 12 467 – 12 477NUMBER OF MODULES 8 12 24 36 54COLOUR RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white RAL 9016 white
RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITH TRANSPARENT DOOR YES YES YES YES YESWITH OPAQUE DOOR YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YESRESISTANCE TO HEAT GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °C GWT 650 °CTYPE OF MATERIAL Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plasticSHOCK RESISTANCE 6 Joule 6 Joule 6 Joule 6 Joule 6 JouleOPERATING TEMPERATURE -20 °C ÷ +85 °C -20° ÷ +85 °C -20° ÷ +85 °C -20° ÷ +85 °C -20° ÷ +85 °CPROTECTION DEGREE IP 40 IP 40 IP 40 IP 40 IP 40MAX DISSIPATION POWER (1) 19 W 27 W 31 W 45 W 56 WDESIGNED FOR INPUT CONDUITS CONDUITS CONDUITS CONDUITS Direct
Ø 25÷32 mm Ø 25÷32 mm Ø 25÷32 mm Ø 25÷32 mm branch connectionsTRUNKINGS up to TRUNKINGS up to TRUNKINGS up to TRUNKINGS up to Conduits-cables
200X60 mm 200X60 mm 200X60 mm 200X60 mm Ø 5÷35 mmDESIGNED FOR MOULDED-CASECIRCUIT BREAKERS - - - YES YESDESIGNED FOR RAPID CABLING UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX SL UNIFIX L
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Wall-mounting consumer units IP 40 Europa Series with door
Reaction to chemical agents (*)
(*) Indications concerning theresistance of the products tochemical agents must beconsidered as an indication only,and refer to standard conditions(40 °C, integral product).
IP 40 Europa PolycarbonateSeries wall-mountingconsumer units
Co
ld w
ater
Ho
t w
ater
Sul
phu
ric
acid
40%
Hyd
roch
lori
c ac
id 3
5%
Ace
tic
acid
10%
Ben
zole
Gas
olin
e
Ace
tone
Eth
yl a
lcco
hol
Am
mo
nia
liqui
d
Dic
hlo
rom
etha
ne
Die
sel o
il- n
apht
a
Min
eral
oils
and
gra
ses
Foo
d o
ils a
nd g
rase
s
Per
chlo
roet
hyle
ne
Tric
hlo
roet
hyle
ne
Eth
ylet
her
Ozo
ne
Tolu
ene
Met
hano
l
Sp
irit
s
Milk
Frui
t ju
ices
Fluo
rid
e hy
dro
carb
ons
Lye-
was
hes
Cle
ansi
ngs
Wat
er s
olu
tio
n
resistant partially resistant not resistant
VLC
O00
56
9/8 ABB SACE
9
Further technical information and applicationsConsumer units for modular circuit breakers – summarisedtechnical data
CODE 12 702 12 704 12 708 12 712 12 714 12 716 12 718NUMBER OF MODULES 2 4 8 12 24 36 54COLOUR RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITHOUT DOOR YES YES YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YES YES YESRESISTANCE TO HEAT GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °CTYPE OF MATERIAL Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate PolycarbonateSHOCK RESISTANCE 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10)OPERATING TEMPERATURE -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °CPROTECTION DEGREE IP 40 IP 40 IP 40 IP 40 IP 40 IP 40 IP 40MAX DISSIPATION POWER (1) 15 W 17 W 25 W 40 W 55 W 75 W 96 WFLANGE FOR DIRECT BRANCH - - COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK
Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mmEXTRACTABLE FRAME - YES YES YES YES YES YESDESIGNED FOR MOULDED-CASECIRCUIT BREAKERS - YES YES YES YES YES YESDESIGNED FORRAPID CABLING - - UNIFIX L UNIFIX L UNIFIX L UNIFIX L UNIFIX L
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Polycarbonate wall-mounting consumer units IP 40 Europa Series
CODE 12 644 – 12 684 12 646 – 12 686 12 650 – 12 690 12 652 – 12 692 12 654NUMBER OF MODULES 4 6 10 20 10COLOUR RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITH TRANSPARENT DOOR YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YESRESISTANCE TO HEAT GWT 650 °C grey GWT 650 °C grey GWT 650 °C grey GWT 650 °C grey GWT 650 °C greyTYPE OF MATERIAL Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plastic Thermo-plasticSHOCK RESISTANCE 6 Joule 6 Joule 6 Joule 6 Joule 6 JouleOPERATING TEMPERATURE -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °C -20 °C ÷ +85 °CPROTECTION DEGREE IP 55 IP 55 IP 55 IP 55 IP 55MAX DISSIPATION POWER (1) 13 W 17 W 20 W 35 W 35 WDESIGNED FOR INPUT Ø 16 ÷ 40 mm Ø 16 ÷ 40 mm Ø 16 ÷ 40 mm Ø 16 ÷ 40 mm Ø 16 ÷ 40 mm
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Wall-mounting consumer units IP 55 Europa Series
IP 55 Europa Serieswall-mountingconsumer units
Co
ld w
ater
Ho
t w
ater
Sul
phu
ric
acid
40%
Hyd
roch
lori
c ac
id 3
5%
Ace
tic
acid
10%
Ben
zole
Gas
olin
e
Ace
tone
Eth
yl a
lcco
hol
Am
mo
nia
liqui
d
Dic
hlo
rom
etha
ne
Die
sel o
il- n
apht
a
Min
eral
oils
and
gra
ses
Foo
d o
ils a
nd g
rase
s
Per
chlo
roet
hyle
ne
Tric
hlo
roet
hyle
ne
Eth
ylet
her
Ozo
ne
Tolu
ene
Met
hano
l
Sp
irit
s
Milk
Frui
t ju
ices
Fluo
rid
e hy
dro
carb
ons
Lye-
was
hes
Cle
ansi
ngs
Wat
er s
olu
tio
n
resistant partially resistant not resistant
Reaction to chemical agents (*)
(*) Indications concerning theresistance of the products tochemical agents must beconsidered as an indication only,and refer to standard conditions(40 °C, integral product).
VLC
O00
57
9/9ABB SACE
9
Further technical information and applicationsConsumer units for modular circuit breakers – summarisedtechnical data
CODE 12 724 – 12 744 12 728 – 12 748 12 732 – 12 752 12 733 – 12 753 12 734 – 12 754 12 735 – 12 755 12 738 – 12 75812 736 – 12 756
NUMBER OF MODULES 4 8 12 18 24 36 54COLOUR RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITH TRANSPARENT DOOR YES YES YES YES YES YES YES
WITH OPAQUE DOOR YES YES YES YES YES YES YES
DOUBLE INSULATION YES YES YES YES YES YES YES
RESISTANCE TO HEAT GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °CTYPE OF MATERIAL Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate PolycarbonateSHOCK RESISTANCE 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10)OPERATING TEMPERATURE -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °CPROTECTION DEGREE IP 65 IP 65 IP 65 IP 65 IP 65 IP 65 IP 65MAX DISSIPATION POWER (1) 15 W 20 W 30 W 32 W 34 W 45 W 56 WFLANGE FOR DIRECT - COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNKBRANCH Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mmEXTRACTABLE YES YES YES YES YES YES YESMOULED-CASEDESIGNED FOR MOULED-CASECIRCUIT BREAKERS YES YES YES YES YES YES YES
DESIGNED FORRAPID CABLING - UNIFIX L UNIFIX L UNIFIX L UNIFIX L UNIFIX L UNIFIX L
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Polycarbonate wall-mounting consumer units IP 65 Europa Series
CODE 12 722-12 742 12 743 12 745 12 746 12 747NUMBER OF MODULES 2/4 8 12 24 36COLOUR RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITH TRANSPARENT DOOR YES YES YES YES YESWITH OPAQUE DOOR YES - - - -DOUBLE INSULATION YES YES YES YES YESRESISTANCE TO HEAT GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °CTYPE OF MATERIAL Polycarbonate Polycarbonate Polycarbonate Polycarbonate PolycarbonateSHOCK RESISTANCE 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10)OPERATING TEMPERATURE -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °CPROTECTION DEGREE IP 65 IP 65 IP 65 IP 65 IP 65MAX DISSIPATION POWER (1) 11 W 15 W 19 W 31 W 45 WFLANGE FOR DIRECT BRANCH - COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK
Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mmEXTRACTABLE FRAME - YES YES YES YESDESIGNED FOR MOULED-CASECIRCUIT BREAKERS - YES YES YES YESDESIGNED FOR RAPID CABLING - UNIFIX L UNIFIX L UNIFIX L UNIFIX L
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
Polycarbonate wall-mounting consumer units IP 65 Fly Series
IP 65 Fly and EuropaSeries wall-mountingconsumer units
Co
ld w
ater
Ho
t w
ater
Sul
phu
ric
acid
40%
Hyd
roch
lori
c ac
id 3
5%
Ace
tic
acid
10%
Ben
zole
Gas
olin
e
Ace
tone
Eth
yl a
lcco
hol
Am
mo
nia
liqui
d
Dic
hlo
rom
etha
ne
Die
sel o
il- n
apht
a
Min
eral
oils
and
gra
ses
Foo
d o
ils a
nd g
rase
s
Per
chlo
roet
hyle
ne
Tric
hlo
roet
hyle
ne
Eth
ylet
her
Ozo
ne
Tolu
ene
Met
hano
l
Sp
irit
s
Milk
Frui
t ju
ices
Fluo
rid
e hy
dro
carb
ons
Lye-
was
hes
Cle
ansi
ngs
Wat
er s
olu
tio
n
resistant partially resistant not resistant
Reaction to chemical agents (*)
(*) Indications concerning theresistance of the products tochemical agents must beconsidered as an indication only,and refer to standard conditions(40 °C, integral product).
VLC
O00
58
9/10 ABB SACE
9
Further technical information and applicationsConsumer units for modular circuit breakers – summarisedtechnical data
CODE 12 764-12 784 12 768-12 788 12 772-12 792 12 774-12 794 12 776-12 796 12 778-12 798DIMENSIONS (mm) 140x220x140 205x220x140 275x220x140 275x370x140 275x570x140 380x570x140COLOUR RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITH TRANSPARENT DOOR YES YES YES YES YES YESWITH OPAQUE DOOR YES YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YES YESRESISTANCE TO HEAT GWT 960 °C GWT 960° C GWT 960° C GWT 960° C GWT 960° C GWT 960° CTYPE OF MATERIAL Polycarbonate Polycarbonate Polycarbonate Polycarbonate Polycarbonate PolycarbonateSHOCK RESISTANCE 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10)OPERATING TEMPERATURE -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °CPROTECTION DEGREE IP 65 IP 65 IP 65 IP 65 IP 65 IP 65MAX DISSIPATION POWER (1) 10 W 19 W 25 W 40 W 61 W 75 WFLANGE FOR DIRECT BRANCH - COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK
Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mmFIT FOR INSTALLING MCBs - - - YES YES YESMOUNTING KITFIT FOR INSTALLING YES YES YES YES YES YESBASE PLATEFIT FOR INSTALLING - - - YES YES YESFIXED COUNTER-DOOR
IP 65 Europa Series switchboard for industrial applications
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
CODE 13 200 13 204 13 205 13 206 13 208NUMBER OF MODULES 4 12 12 12 18DIMENSIONS (mm) 136x540x140 275x370x140 275x455x140 275x570x140 380x570x140COLOUR RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 grey RAL 7035 greyWITH TRANSPARENT DOOR YES YES YES YES YESDOUBLE INSULATION YES YES YES YES YESRESISTANCE TO HEAT GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °C GWT 960 °CTYPE OF MATERIAL Polycarbonate Polycarbonate Polycarbonate Polycarbonate PolycarbonateSHOCK RESISTANCE 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10) 20 Joule (IK 10)OPERATING TEMPERATURE -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °C -25 °C ÷ +115 °CPROTECTION DEGREE IP 65 IP 65 IP 65 IP 65 IP 65MAX DISSIPATION POWER (1) 13 W 24 W 23 W 27 W 37 WFLANGE FOR DIRECT BRANCH - COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK COND. AND TRUNK
Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm Ø 5÷35 mm
(1) Data concerning dissipative power have been obtained by following the instructions in CEI 23-49 Standard, with a temperature difference of Dt= 30 °C.
IP 65 Marostica Series switchboards for industrial application with blank front
9/11ABB SACE
9
Further technical information and applicationsSwitchboards and boxes – reaction to chemical agents
IP 65 Europa Seriesand blank frontswitchboards
IP 65 Marostica Seriesswitchboards
IP 44 junction boxeswith press-on lid
IP 44 junction boxeswith screw-on lid
IP 65 junction boxesin polycarbonate
Wiring accessoriesboxes
Co
ld w
ater
Ho
t w
ater
Sul
phu
ric
acid
40%
Hyd
roch
lori
c ac
id 3
5%
Ace
tic
acid
10%
Ben
zole
Gas
olin
e
Ace
tone
Eth
yl a
lcco
hol
Am
mo
nia
liqui
d
Dic
hlo
rom
etha
ne
Die
sel o
il- n
apht
a
Min
eral
oils
and
gra
ses
Foo
d o
ils a
nd g
rase
s
Per
chlo
roet
hyle
ne
Tric
hlo
roet
hyle
ne
Eth
ylet
her
Ozo
ne
Tolu
ene
Met
hano
l
Sp
irit
s
Milk
Frui
t ju
ices
Fluo
rid
e hy
dro
carb
ons
Lye-
was
hes
Cle
ansi
ngs
Wat
er s
olu
tio
n
resistant partially resistant not resistant
Reaction to chemical agents (*)
(*) Indications concerning the resistance of the products to chemical agents must be considered as an indication only and refer to standard conditions(40 °C, integral product).
VLC
O00
59
9/12 ABB SACE
9
Further technical information and applicationsPossible configurations of terminal holders – terminal barsfor consumer units
Terminal holders and bars are supplied separately; in this way, byinserting one or two terminal bars in the terminal holders, you cancreate the best terminal for your requirements. All the possibleconfigurations for creating each type of container are given in the
table below. Not only do you have the advantage of being able tocreate a personalised terminal but clearly there will be an econo-mic advantage from using only that which is really necessary.
IP 40 Estetica Series flush-mounting consumer unitsIP 40 Europa Series flush-mounting consumer unitsIP 40 Unibox Series flush and wall-mounting consumerunits
For consumer units Terminal holder Terminal barsNumber of modules Code Code x q.ty
12 540 12 531x112 540 12 531x212 540 12 531x1 with 12 532x112 540 12 532x112 540 12 533x112 540 12 534x112 541 12 531x112 541 12 531x212 541 12 531x1 with 12 532x112 541 12 531x1 with 12 533x112 541 12 531x1 with 12 534x112 541 12 531x1 with 12 535x112 541 12 532x112 541 12 532x212 541 12 533x112 541 12 534x112 541 12 535x112 542 12 531x112 542 12 531x212 542 12 531x1 with 12 532x112 542 12 531x1 with 12 533x112 542 12 531x1 with 12 534x112 542 12 531x1 with 12 535x112 542 12 532x112 542 12 532x212 542 12 532x1 with 12 533x112 542 12 532x1 with 12 534x112 542 12 533x112 542 12 534x112 542 12 535x1
IP 40 Europa Series wall-mounting consumer units
For consumer units Terminal holder Terminal barsNumber of modules Code Code x q.ty
12 540 12 531x112 540 12 531x212 540 12 531x1 with 12 532x112 540 12 532x112 540 12 533x112 540 12 534x112 541 12 531x112 541 12 531x212 541 12 531x1 with 12 532x112 541 12 531x1 with 12 533x112 541 12 531x1 with 12 534x112 541 12 531x1with 12 535x112 541 12 532x112 541 12 532x212 541 12 533x112 541 12 534x112 541 12 535x112 543 12 531x112 543 12 531x212 543 12 531x1 with 12 532x112 543 12 531x1 with 12 533x112 543 12 531x1 with 12 534x112 543 12 531x1 with 12 535x112 543 12 532x112 543 12 532x212 543 12 532x1 with 12 533x112 543 12 532x1 with 12 534x112 543 12 532x1 with 12 535x112 543 12 533x112 543 12 533x212 543 12 533x1 with 12 534x112 543 12 534x112 543 12 534x212 543 12 535x1
8
12
24
36(12 modules x 3 rows)
18
54
8
12
24
36(12 modules x 3 rows)
54
9/13ABB SACE
9
Further technical information and applicationsPossible configurations of terminal holders – terminal barsfor consumer units
Europa Series consumer units for industrial applications
For boxes Terminal holder Terminal barsdimensions Code Code x q.ty
12 538 12 531x1
12 539 12 531x1
12 540 12 531x112 540 12 531x212 540 12 531x1 with 12 532x112 540 12 532x112 540 12 533x112 540 12 534x112 543 12 531x112 543 12 531x212 543 12 531x1 with 12 532x112 543 12 531x1 with 12 533x112 543 12 531x1 with 12 534x112 543 12 531x1 with 12 535x112 543 12 532x112 543 12 532x212 543 12 532x1 with 12 533x112 543 12 532x1 with 12 534x112 543 12 532x1 with12 535x112 543 12 533x112 543 12 533x212 543 12 533x1 with 12 534x112 543 12 534x112 543 12 534x212 543 12 535x1
IP 40 Europa Polycarbonate Series wall-mountingconsumer unitsIP 65 Europa Polycarbonate Series wall-mountingconsumer unitsIP 65 Fly Polycarbonate Series wall-mountingconsumer units
For consumer units Terminal holder Terminal barsNumber of modules Code Code x q.ty
12 538 12 531x1
12 539 12 531x1
12 540 12 531x112 540 12 531x212 540 12 531x1 with 12 532x112 540 12 532x112 540 12 533x112 540 12 534x112 543 12 531x112 543 12 531x212 543 12 531x1 with 12 532x112 543 12 531x1 with 12 533x112 543 12 531x1 with 12 534x112 543 12 531x1 with 12 535x112 543 12 532x112 543 12 532x212 543 12 532x1 with 12 533x112 543 12 532x1 with 12 534x112 543 12 532x1 with 12 535x112 543 12 533x112 543 12 533x212 543 12 533x1 with 12 534x112 543 12 534x112 543 12 534x212 543 12 535x1
122436
(12 mod. x 3 rows)
18
36(18 mod.x 2 rows)
54
140x220x140
205x220x140
275x220x140275x370x140275x570x140
380x570x140
8
4
9/14 ABB SACE
9
Further technical information and applicationsPossible configurations of terminal holders – terminal barsfor consumer units
Marostica Series modular switchboards
For boxes Terminal holder Terminal barsdimensions Code Code x q.ty
12 540 12 531x112 540 12 531x212 540 12 531x1 with 12 532x112 540 12 532x112 540 12 533x112 540 12 534x112 543 12 531x112 543 12 531x212 543 12 531x1 with 12 532x112 543 12 531x1 with 12 533x112 543 12 531x1 with 12 534x112 543 12 531x1 with 12 535x112 543 12 532x112 543 12 532x212 543 12 532x1 with 12 533x112 543 12 532x1 with 12 534x112 543 12 532x1 with 12 535x112 543 12 533x112 543 12 533x212 543 12 533x1 with 12 534x112 543 12 534x112 543 12 534x212 543 12 535x1
275x370x140275x455x140275x570x140
380x570x140
Switchboards with blank front for industrial applications
For boxes Terminal holder Terminal barsdimensions Code Code x q.ty
12 540 12 531x112 540 12 531x212 540 12 531x1 with 12 532x112 540 12 532x112 540 12 533x112 540 12 534x112 543 12 531x112 543 12 531x212 543 12 531x1 with 12 532x112 543 12 531x1 with 12 533x112 543 12 531x1 with 12 534x112 543 12 531x1 with 12 535x112 543 12 532x112 543 12 532x212 543 12 532x1 with 12 533x112 543 12 532x1 with 12 534x112 543 12 532x1 with 12 535x112 543 12 533x112 543 12 533x212 543 12 533x1 with 12 534x112 543 12 534x112 543 12 534x212 543 12 535x1
275x370x140275x455x140275x570x140
380x570x140
IP65 junction boxes in polycarbonate
For boxes Terminal holder Terminal barsdimensions Code Code x q.ty
12 538 12 531x1
12 539 12 531x1
12 540 12 531x112 540 12 531x212 540 12 531x1 with 12 532x112 540 12 532x112 540 12 533x112 540 12 534x112 543 12 531x112 543 12 531x212 543 12 531x1 with 12 532x112 543 12 531x1 with 12 533x112 543 12 531x1 with 12 534x112 543 12 531x1 with 12 535x112 543 12 532x112 543 12 532x212 543 12 532x1 with 12 533x112 543 12 532x1 with 12 534x112 543 12 532x1 with 12 535x112 543 12 533x112 543 12 533x212 543 12 533x1 with 12 534x112 543 12 534x112 543 12 534x212 543 12 535x1
140x220x140
205x220x140
275x220x140275x370x140275x570x140
380x570x140
9/15ABB SACE
9
Further technical information and applicationsEnclosures and boxes for light prefabrication
Mark the holesinteraxis
Make 2 Ø 62 mm holes,using the cutter code 10 843
Remove the burrs betweenthe holes
Hole ready for theinstallation of the flush
mounting box code 10 804
Mark the holesinteraxis
Make 4 Ø 68 mm holes
Remove the burrsbetween the holes
Hole ready for theinstallation of the flush
mounting box code 10 821
To install the wiring accessories boxes in light prefabricated walls, a wide range of special cutters is available; the mountingsequence is indicated as follows.
The same cutters can be used to install wiring accessories modular boxes and boxes for operating consumer units, as shown in thefollowing pictures.
Make a hole in the wall to install thewiring accessories box using thespecial cutter code 10 841
Insert the cable and the conduit throughthe hole (for conduit Ø 20 mm outside)
Close the spread screwsInstall the wiring accessories box in thehole with the cable and the conduit
FLS
P00
03FL
SP
0004
9/16 ABB SACE
9
Flush-mounting Unibox, Europa and Estetica Series
An extractable frame is availablealso in the single row version, makingbench cabling operations easier.
The handy slots made to attach theunit to the frame guarantee correctalignment even when the flush-mounting box has not been installedon perfectly flat surfaces.
By combining the copper terminalbars to the corresponding plasticterminal holders, according to theconfiguration, the consumer unitterminal can be fitted with Neutral (N)or Earth (E).
Further technical information and applicationsMounting examples and functional details
The fact that the unit has beendesigned to use the rapid Unifix SL
cabling system means that there is aconsiderable saving in terms of time
and installation costs.
1SLC
0010
60F
0001
1SLC
0010
61F
0001
1SLC
0010
62F
0001
1SLC
0010
63F
0001
9/17ABB SACE
9
Further technical information and applicationsMounting examples and functional details
Flush-mounting Europa Series
The extractable DIN rail framemakes bench cabling easy.
The roomy interiors make cablingeasy and simple.
The two housings on the sides ofthe front ensure that the door iscompletely reversible and therefore itcan be mounted on the right or on theleft according to specific requirements.
1SLC
0010
64F
0001
1SLC
0010
66F
0001
1SLC
0010
67F
0001
1SLC
0010
65F
0001
9/18 ABB SACE
9
Further technical information and applicationsMounting examples and functional details
Wall-mounting Unibox Series
FLC
O98
81
FLC
O99
10
FLC
O98
40
FLC
O98
74
FLC
O98
76
FLC
O98
77
FLC
O98
38
FLC
O98
79
The knockout cut halfway down themodule on both sides makes itpossible to fit an extra modulecorresponding to each row of circuitbreakers.
The cover is fitted using rapid pitchscrews in insulating thermo-plastic
that can be lead-sealed if necessary.
The push-pull mechanism meansthat the door can be closed easily.
The door can be fitted with a lockwith a coded key.
The consumer unit is designed witha flange so that it can be used forbranch connection using a conduit;the knockouts make it is possible tomake branch connections withconduits with a maximum diameter of40 mm.
The accurate alignment systemengraved on the top and bottom of thebase of the consumer unit makes iteasy to position the branchconnection trunking.
The knockouts in the cover givemaximum flexibility in trunking branchconnections.
9/19ABB SACE
9
Further technical information and applicationsMounting examples and functional details
Wall-mounting Unibox Series
FLC
O98
39
FLC
O99
19F
LCO
9872
FLC
O98
73
FLC
O98
37
FLC
O98
75
FLC
O98
80
The modular, snap-on frame iseasy to extract and is therefore idealfor bench cabling.
Thanks to plenty of room under theDIN rail it is possible to install thecables tidily and rationalise theirpaths.
The base, on which push-in inletshave been made, is speciallydesigned for the installation ofcorrugated conduits coming from thewall.
Consumer units in the UNIBOX Series have been designed to optimise theuse of the UNIFIX SL rapid cabling system.Another characteristic is the frame, which can be kept in an angled positionthanks to practical wires, making it easier to work on the connection cables.
The special caps used to cover theholes for attaching to the wall ensurethat the consumer unit is doubleinsulated.
The practical holding system securesthe incoming and outgoing cables to aspecial comb accessory, which not onlykeeps the cables tidy but also protectsthe devices’ terminals from any directmechanical contact.
9/20 ABB SACE
9
Fly and Europa Polycarbonate series
Further technical information and applicationsMounting examples and functional details
By combining the copper terminalbars to the corresponding plastic
terminal holders, according to theconfiguration, the consumer unit
terminal can be fitted with Neutral (N)or Earth (E).
The push-in flange makes itpossible to carry out direct conduit
and cable branch connections withouthaving to use cable clamps, conduit
clamps or connectors, with anobvious saving in terms of time and
cabling costs.
Thanks to the expandedpolyurethane seal inserted betweenthe door and the front of theconsumer unit, using the continuouscasting process, the IP 65 protectiondegree is guaranteed, also making itimpossible to lose the seal itself.
Models with 8 modules and morehave been designed to use theUNIFIX L rapid cabling system.
1SLC
0010
68F
0001
The door is designed so that a lockwith a coded key can be fitted.
FLC
O98
24
1SLC
0010
69F
0001
FLC
O98
21
1SLC
0010
70F
0001
1SLC
0010
71F
0001
1SLC
0010
72F
0001
9/21ABB SACE
9
Further technical information and applicationsMounting examples and functional details
Fly and Europa Polycarbonate series
Using the special hinges suppliedthe cover can be secured to the frameto make maintenance work easier.
When fixing the unit to the wallfrom the inside, the special hole capsensure double insulation ismaintained.
The frame that can be fitted ontothe consumer unit makes semi-flushmounting possible, guaranteeing anattractive finish.
The snap-on, extractable DIN railframe simplifies and speeds up benchcabling operations.
Using the brackets it is easy to fixthe consumer unit in any environment.
FLC
O98
32
FLC
O98
30
FLC
O98
36
FLC
O98
35
1SLC
0010
73F
0001
1SLC
0010
74F
0001
9/22 ABB SACE
9
Further technical information and applicationsBranch connections using the bi-material flange
DIRECT APPLICATION WITH CONDUIT OR CABLE
from 17to 20 mmTo insert cables or conduitsup to 20 mm, make holes inthe points indicated using ascrewdriver and cut therubber using scissors
from 5 to16 mmMake a hole where indicatedusing a screw driver to insertcables or conduits with adiameter of from 5 to 16 mm
from 25to 35 mmTo insert cables with adiameter up to 35 mm andconduits up to 32 mm, makeholes in the points indicatedusing a screwdriver and cutthe rubber using scissors
How to insert cables andconduits.
from 21to 24 mmTo insert cables or conduitsup to 24 mm, make holes inthe points indicated using ascrewdriver and cut therubber using scissors
9/23ABB SACE
9
Further technical information and applicationsBranch connections using the bi-material flange
APPLICATION WITH CONDUIT OR CABLE CLAMPS
1Possible extraction ofthe flange
3Branch connection usingthe conduit/cable clampor the conduit boxconnector
4Inserting the flange intothe base of the enclosu-re
5Fixing the base of theenclosure to the wall
2Identification and cuttingof the suitable inlet (youmust remove all the softpart)
Suitable ABB codes for branch connection with flange in bi-material
Inlets Cable-gland Conduit box connector Conduit clampfor [mm] [mm] [mm]flange[mm]
Ø 23.5 00 934 – 00 944 00 421 00 431PG 16 (Ø 13/16) Ø 20 Ø 20
Ø 30 00 935 – 00 945 00 422 00 432PG 21 (Ø 17/29) Ø 25 Ø 25
Ø 37.5 00 936 – 00 946 00 423 00 433PG 29 (Ø 21/26) Ø 32 Ø 32
Overall dimensions
Index
10/1ABB SACE
10
IP 40 Unibox Series flush mounting consumer units ............................................................10/2
IP 40 Estetica Series flush-mounting consumer units ...........................................................10/4
IP 40 Europa Series flush-mounting consumer units ............................................................10/6
IP 40 Unibox Series wall-mounting consumer units ..............................................................10/8
IP 40 Europa Series wall-mounting consumer units ...........................................................10/10
IP 40 Europa Polycarbonate Series wall-mounting consumer units ...................................10/12
IP 40 wall-mounting covers .................................................................................................10/14
IP 55 Europa Series wall-mounting consumer units ...........................................................10/16
IP 65 Fly Polycarbonate Series wall-mounting consumer units ..........................................10/18
IP 65 Europa Polycarbonate Series wall-mounting consumer units ...................................10/20
IP 40 panel fronts ................................................................................................................10/22
IP 55 panel fronts ................................................................................................................10/23
Livorno Series flush and wall-mounting emergency consumer units ..................................10/24
Europa Series switchboards for industrial applications .......................................................10/26
Switchboards for industrial applications with blank front .....................................................10/28
Marostica Series modular switchboards .............................................................................10/30
IP 44 and IP 55 junction boxes in thermoplastic material ...................................................10/32
IP 65 junction boxes in polycarbonate ................................................................................10/34
IP 40 equipment and empty enclosures ..............................................................................10/36
IP 55 equipment and empty enclosures ..............................................................................10/37
Various components ...........................................................................................................10/38
Enclosures and boxes for light prefabrication .....................................................................10/40
Wiring accessories and junction boxes in thermoplastic material .......................................10/42
Installation material .............................................................................................................10/44
Accessories .........................................................................................................................10/48
10/2 ABB SACE
10
Overall dimensionsIP 40 Unibox Series flush-mounting consumer units
Front view
24 modules
36 modules 54 modules
Side view
12 modules26
2
293
247.6
293177.6
408
175
293
252
325
533
325
533
401
360
8 modules
1107250
156
12 modules
181
1107250
24 modules
326
150
118
80 37.5
36/54 modules
118
80 37.5
326
150
150
8 modules
214
177.6
238
VLC
O00
65
10/3ABB SACE
10
Overall dimensionsIP 40 Unibox Series flush-mounting consumer units
VLC
O00
66
Drilling sheets
12 modules
284
r 15
18 modules
384
r 15
73
183
177
73
183
177
80
530
524
280
36 modules
280
24 modules
80
376
370
r 15
r 15
8 modules
215
r 15
73
183
177
10/4 ABB SACE
10
Overall dimensionsIP 40 Estetica Series flush-mounting consumer units
4 modules 8 modules 12 modules
18 modules 24 modules 36 modules
4 modules 24 modules 36 modules
Front view
Side view
8/12/18 modules
Ø 26
Ø 26
Ø 33
300
545
244
180
300244
180
230178
300
395
244
180
160107
180
408352
175
175
3535
Ø 26
Ø 26
Ø 33
16.5
100
395
80103
23
Ø 21
8383
25
Ø 26
16.5
100
180
7295
23
16.5
7373
7295
100
180
23
545
100
3535
252
252
16.5
80103
23
VLC
O00
01
10/5ABB SACE
10
Overall dimensionsIP 40 Estetica Series flush-mounting consumer units
VLC
O00
02
Drilling sheet
12 modules
284
r 15
18 modules
384
r 15
73
183
177
73
183
177
80
530
524
280
36 modules
280
24 modules
80
376
370
r 15
r 15
8 modules
215
r 15
73
183
177
4 modules
114
r 15
73
168
162
1SL2004A00 – 1SL2024A00 – 12 0371SL2008A00 – 1SL2028A00 – 12 0381SL2012A00 – 1SL2032A00 – 12 0421SL2013A00 – 1SL2033A00 – 12 0431SL2014A00 – 1SL2034A00 – 12 0441SL2016A00 – 1SL2036A00 – 12 046
modules code4 modules8 modules12 modules18 modules24 modules36 modules
10/6 ABB SACE
10
Overall dimensionsIP 40 Europa Series flush-mounting consumer units
VLC
O00
03
190
230178
8 modules 12 modules
190
300248
394
300252
24 modules
546
300252
546
410360
36 modules 54 modules
8/12 modules
Front view
7218
190
100
16.5
Ø 26
8383
Ø 36
8012
394
250
16.5
Ø 26
175
175
Ø 33
Ø 26
24 modules 36-54 modules
8012
544
400
16.5
Ø 26
252
252
Ø 33
Ø 26
3535
Side view
100
100
150
102
150
150
102
10/7ABB SACE
10
Overall dimensionsIP 40 Europa Series flush-mounting consumer units
VLC
O00
04
Drilling sheets
8 modules
215
r 15
73
183
177
280
24 modules
r 15
80
376
370
12 modules
284
r 15
73
183
177
80
530
524
280
36 modules
r 15
388
54 modules
r 15
80
526
520
1SL2040A00 – 12 026 – 1SL2057A00 – 12 0581SL2041A00 – 12 027 – 1SL2061A00 – 12 0621SL2045A00 – 12 030 – 1SL2063A00 – 12 0641SL2048A00 – 12 031 – 1SL2065A00 – 12 0661SL2052A00 – 12 035 – 1SL2067A00 – 12 068
modules code8 modules12 modules24 modules36 modules54 modules
10/8 ABB SACE
10
Overall dimensionsIP 40 Unibox Series wall-mounting consumer units
8 modules
Front view
Side view
12 modules 24 modules
36 modules 54 modules
8 modules
220
215174
245
295
234
390
295
234
515
295234
515
403342
24 modules
390
95 22
31
325
117
125
115
148
VLC
O00
05
12 modules
245
95 22
31
180
177
177
115
220
85 20
25
155
177
177
105
36-54 modules
515
95 22
31
450
117
125
115
148
125
10/9ABB SACE
10
Overall dimensionsIP 40 Unibox Series wall-mounting consumer units
8 modules 12 modules 24 modules
36 modules 54 modules
Drilling sheets
187
87
257
94
257
240
257
365
365
365
VLC
O00
06
12 208 – 12 228 – 12 238 – 12 248 – 12 258 – 12 26812 212 – 12 232 – 12 242 – 12 252 – 12 262 – 12 27212 214 – 12 234 – 12 244 – 12 254 – 12 264 – 12 27412 216 – 12 236 – 12 246 – 12 256 – 12 266 – 12 27612 217 – 12 237 – 12 247 – 12 257 – 12 267 – 12 277
modules code8 modules12 modules24 modules36 modules54 modules
10/10 ABB SACE
10
Overall dimensionsIP 40 Europa Series wall-mounting consumer units
8 modules 12 modules
24 modules 36 modules 54 modules
8/12 modules
Front view
24 modules
100
200
8
100
100
200
230178
87
200
303248
350
303248
546
303248
Side view
887
570
379340
36 modules
9
54 modules
VLC
O00
07
20.5
20.5
350
250
42.5
111
400
500
9111
46
50
112.
512
511
2.5
50
50
100
150
150
100
400
570
16
50
135
150
150
135
10/11ABB SACE
10
Overall dimensionsIP 40 Europa Series wall-mounting consumer units
Drilling sheets
8 modules
24 modules
12 modules
36 modules 54 modules
VLC
O00
08
183 254
9494
254
127
127
254
140
130
140
269
440
1SL2408A00 – 12 428 – 1SL2438A00 – 12 448 – 1SL2458A00 – 12 4681SL2412A00 – 12 432 – 1SL2442A00 – 12 452 – 1SL2462A00 – 12 4721SL2414A00 – 12 434 – 1SL2444A00 – 12 454 – 1SL2464A00 – 12 4741SL2416A00 – 12 436 – 1SL2446A00 – 12 456 – 1SL2466A00 – 12 4761SL2417A00 – 12 437 – 1SL2447A00 – 12 457 – 1SL2467A00 – 12 477
modules code8 modules12 modules24 modules36 modules54 modules
10/12 ABB SACE
10
Overall dimensionsIP 40 Europa Polycarbonate Series wall-mounting consumerunits
5156
1646 50
150
150
285
285
135
135
Front view
2-4 modules
Side view
4 modules 8 modules
2-4 modules
12 modules
24 modules
4 modules 8-12 modules
36 modules 54 modules
24 modules
IP45
IP45
IP45 IP45
IP45
IP45
36 modules 54 modules
VLC
O00
09
175
10581
220
13798
220
204165
220
274235
370
274235
274235
570
379340
570
5016
87.5
56 5156 5156 5156 5156
110
110
1650
107
107
110
110
1650
1646 50
125
122.
512
2.5
185
185 10
7
107
1646 50
150
150
285
285
135
135
87.5
51
95
107
10/13ABB SACE
10
Overall dimensionsIP 40 Europa Polycarbonate Series wall-mounting consumerunits
Drilling sheets
2-4 modules 4 modules 8 modules 12 modules
54 modules36 modules24 modules
VLC
O00
10
52 52
110
68
90
68
60
90
94
160
170
164
240
210
184 184
440
210164
285269
440
289
210164
184
90170
12 70212 70412 70812 71212 71412 71612 718
modules code2-4 modules4 modules8 modules12 modules24 modules36 modules54 modules
170
140
10/14 ABB SACE
10
Overall dimensionsIP 40 wall-mounting covers
2 modules 4 modules 6 modules
2 modules 4-6 modules
VLC
O00
11
140
5035
160
9674
160
139121
140
46
17.5
==
65
160
46
==
65
17.5
Front view
Side view
10/15ABB SACE
10
Overall dimensionsIP 40 wall-mounting covers
2 modules 4 modules 6 modules
VLC
O00
12
8025
118
44
125
94
1SL2402A00 – 12 4221SL2404A00 – 12 4241SL2406A00 – 12 426
modules code2 modules3 modules4 modules
Drilling sheets
10/16 ABB SACE
10
Overall dimensionsIP 55 Europa Series wall-mounting consumer units
4 modules 6 modules 10 modules
4-6-10 modules
10 special modules 20 modules
10 modules 20 modules
VLC
O00
13
181
121106
181
156141
181
230206
323
251226.5
323
251226.5
86
17.5
110
176
68 18
120
25.5
110=
102 18
52.5
=
145
8888
120
25.5
110
=
102 18
52.5
=
145
8888
Front view
Side view
10/17ABB SACE
10
Overall dimensionsIP 55 Europa Series wall-mounting consumer units
4 modules 6 modules 10 modules
10 modules 20 modules
VLC
O00
14
161
106
161
141
156
206
250
226.5
250
226.5
12 664 – 12 68412 646 – 12 68612 650 – 12 690 – 12 65412 652 – 12 692
modules code4 modules6 modules10 modules20 modules
Drilling sheets
10/18 ABB SACE
10
Overall dimensionsIP 65 Fly Polycarbonate Series wall-mounting consumerunits
IP65
2-4 modules 8 modules 12 modules
2-4 modules
24 modules 36 modules
8-12 modules 24 modules
IP65
IP65 IP65
IP65
36 modules
10581
175
204165
220
274235
220
274235
370
274235
570
VLC
O00
15
175
100
40
16
56.5 54.5
87.5
87.5
212
120
81.5
4656.5
106
106
16
138
362
120
4656.5
81.5138
122.
512
2.5
125
185
185 56
2
120
150
150
164656.5
81.5138
281
281
135
135
111
16
Front view
Side view
10/19ABB SACE
10
Overall dimensionsIP 65 Fly Polycarbonate Series wall-mounting consumerunits
2-4 modules 8 modules 12 modules
24 modules 36 modules
VLC
O00
16
52 52
110 90
94
160
170
210164
184
90170
164
240
210
184 184
440
210164
12 742 – 12 72212 74312 74512 74612 747
modules code2-4 modules8 modules12 modules24 modules36 modules
140Drilling sheets
10/20 ABB SACE
10
Overall dimensionsIP 65 Europa Polycarbonate Series wall-mounting consumerunits
50
4 modules 8 modules 12 modules
4-8-12 modules
18 modules
24 modules
18 modules 24 modules
IP65IP65IP65IP65
36 modules 36 modules 54 modules
VLC
O00
17
137
220
90
204
220
165
274
220
235
379
220
340
441646
210
160
81.5
441646
210
160
81.5
441646
310
81.5
185
185 12
2.5
122.
512
5
IP65IP65
IP65
379
370
340
IP65
274
370
235
274235
570
570
379340
105
105
50
105
105
50
36-54 modules
441646
81.5
281
281
150
150
502
50
Front view
Side view
10/21ABB SACE
10
Overall dimensionsIP 65 Europa Polycarbonate Series wall-mounting consumerunits
4 modules 8 modules 12 modules 18 modules
36 modules 36 modules24 modules
VLC
O00
18
68
90
68
60
90
94
160
170
210164
184
90170
164
240
184 184
440
210164
285269
440
289
170
90170
240
54 modules
285269
289
210210
12 724 – 12 74412 728 – 12 74812 732 – 12 75212 733 – 12 75312 734 – 12 75412 735 – 12 75512 736 – 12 75612 738 – 12 758
modules code4 modules8 modules12 modules18 modules24 modules36 modules (18x2)36 modules (12x3)54 modules
269284
140
Drilling sheets
10/22 ABB SACE
10
Overall dimensionsIP 40 panel fronts
2 modules 3 modules 4 modules
2-3 modules 4 modules
2 modules 3 modules 4 modules
VLC
O00
19
90
8160
90
9977
90
11794.5
90
105
45
105
90
4580
36
46
58
46
84
46
12 36212 36312 364
modules code2 modules3 modules4 modules
Front view
Side view
Drilling sheets
10/23ABB SACE
10
Overall dimensionsIP 55 panel fronts
4 modules 6 modules 10 modules
4-6-10 modules
4 modules 6 modules 10 modules
VLC
O00
20
125105
180
160140
180
230210
180
80
160
120
160
190
160
12 65812 65912 660
modules code4 modules6 modules10 modules
180
82
11076
60
Front view
Side view
Drilling sheets
10/24 ABB SACE
10
Overall dimensionsLivorno Series flush and wall-mounting emergencyconsumer units
46
20
13 141 – 13 15113 140 – 13 150
IP55
13 171 – 13 17513 170 – 13 174
13 144 – 13 15413 143 – 13 153
IP55
13 161 – 13 16513 160 – 13 164
13 180 – 13 183 13 186
IP55
13 180 13 183 13 161 – 13 16513 160 – 13 164
13 171 – 13 17513 170 – 13 174
13 141 – 13 15113 140 – 13 150
13 144 – 13 15413 143 – 13 153
VLC
O00
21
11494
114
120
500
50
12 160140
180
205165
218
170138
212
200138
244
40
110
114
18 40 18
110
114
73 40
175
180
16.5
55 81.5 0.5
215
16
100 0.5
212
212
17 47
18
244
17 47
50
120
107
212
Front view
Side view
10/25ABB SACE
10
Overall dimensionsLivorno Series flush and wall-mounting emergencyconsumer units
13 180 13 183
13 161 – 13 16513 160 – 13 164
13 171 – 13 17513 170 – 13 174
13 141 – 13 15113 140 – 13 150
13 144 – 13 15413 143 – 13 153
VLC
O00
22
76
76
125
105
94
140
90
80
160
80
160
100
212
105
105
105
102
50
Drilling sheets
10/26 ABB SACE
10
Overall dimensionsEuropa Series switchboards for industrial applications
IP65IP65IP65
IP65 IP65
IP65
VLC
O00
23
220
13798
12 764 – 12 784 12 768 – 12 788
220
204165
12 772 – 12 792
220
274235
12 774 – 12 794 12 776 – 12 796 12 778 – 12 798
274235
370
274235
570
570
379340
12 768 – 12 78812 764 – 12 78412 772 – 12 792
12 776 – 12 796 12 778 – 12 798
56 81.5
220
160
210
370
360
56 81.5
570
560
56 81.5
Front view
Side view
10/27ABB SACE
10
Overall dimensionsEuropa Series switchboards for industrial applications
VLC
O00
24
12 764 – 12 784 12 768 – 12 788 12 772 – 12 792
12 774 – 12 794 12 776 – 12 796 12 778 – 12 798
68 6890
94
90
140 210
164
90
240
210
164
210
164
440
285
269
440
60 104 184
184 184 289
Drilling sheets
10/28 ABB SACE
10
Overall dimensionsSwitchboards for industrial applications with blank front
IP65
IP65
IP65
13 200
Ø 23
max.42min.16.5
Ø 23
IP65
IP65
VLC
O00
25
13 204 13 205
13 206 13 208
13 200 13 204 13 205 13 206 - 13 208
16.5
2036
110 14041
40
50
14041
40
50max.42min.16.5
max.42min.16.5
50
14041
40
540
136113
275235
370 45
5
275235
570
275235
380340
570
170
540
94
370
94
170
100
100
455
170
170
570
94
94
Front view
Side view
10/29ABB SACE
10
Overall dimensionsSwitchboards for industrial applications with blank front
= =
VLC
O00
26
13 200 13 204 13 205
13 206 13 208 13 20613 208
1818
252
252
56
240
164
210
56
164
210
210
164
440
285
440
269 56
56
104 104
104 289
Drilling sheets
10/30 ABB SACE
10
Overall dimensionsMarostica Series modular switchboards
13 210
Ø 23
max. 42min. 16.5
VLC
O00
27
13 224 13 215
13 226 13 216
13 210 13 224 13 215 13 226 – 13 21613 228 – 13 218
16.5
2036
110 14041
40
50
14041
40
50max. 42min. 16.5
max. 42min. 16.5
50
14041
40
13 228 13 218
IP65 IP65IP65IP65
170
540
94
370
94
170
455
170
170
570
570
275235
380340
570
380340
570
570
275235
IP65
455
275235
IP65
275235
370
IP65
540
136113
108
98
76
163
108
98
108
98
108
98
76
163
94
94
Front view
Side view
10/31ABB SACE
10
Overall dimensionsMarostica Series modular switchboards
= =
VLC
O00
28
13 210 13 224 13 215
13 226 – 13 216 13 228 – 13 218
Plates for switchboards
13 251 13 261 13 253 – 13 259 13 263 – 13 269
13 271
13 255 13 265 13 257
13 267 13 273 13 275 13 281 13 283 13 279 – 13 28513 287
1818
252
252
56
240
164
210
56
164
210
210
164
440
285
440
269 56
56
220
120
120
110
68
78
r.34
120
220
57
65
r.28.5
6540
110
120
110
57
65
r.28.5120
110
78
120
220
68
78
r.34
32
110
120
110
74
86
r.37
86
120
220
74
86
r.37
24
110
120
220
74
164
r.37
120
79120
220
95
210
170
98120
220
184
143
131
115120
220
83
200
173
90
18
120
220
120
220
184 184
184 289
Drilling sheets
10/32 ABB SACE
10
Overall dimensionsIP 44 and IP 55 junction boxes in thermoplastic material
00 828 – 00 834 – 00 87800 858 – 00 864 – 00 884
00 830 – 00 824 – 00 87400 854 – 00 860 – 00 880
00 826 – 00 832 – 00 87600 856 – 00 862 – 00 884
00 81000 80800 800 00 802
00 816 – 00 82100 846 – 00 851
00 822 – 00852 – 00 87200 820 – 00 850
Ø 23
00 800
VLC
O00
29
76Ø 71
94Ø 89
8775
75 87 101
88
10188
13011496
61 79
13011395
95 113
130
179162142
99 120
133
170
145
231
181
203
253
345323
149 149
226
251
275
37
56
618
97
187
150.5
125.
5
162
Ø 23
00 808
1842 6
66
Ø 23
00 802
42 618
74
Ø 32
00 810
40
2045 6
75
00 820 – 00 850
Ø 32
4020
75
17 Ø 32
00 816 – 00 846
40 17
108
20
42
205
155
Front view
Side view
10/33ABB SACE
10
Overall dimensionsIP 44 and IP 55 junction boxes in thermoplastic material
56
Side view
00 824 – 00 58400 874
00 826 – 00 85600 876
Ø 32
00 822 – 00 85200 872
Ø 32
00 821 – 00 851
00 832 – 00 86200 882
00 834 – 00 86400 884
00 800 – 00 581 00 80800 802 00 810 00 816 – 00 846
00 821 – 00 851 00 822 – 00 852 – 00 872
00 824 – 00 830 – 00 87400 854 – 00 860 – 00 880
00 826 – 00 832 – 00 87600 856 – 00 862 – 00 884
Ø 32
Ø 32
00 828 – 00 85800 878
Ø 37
00 830 – 00 86000 880
Ø 32
Ø 37
Ø 37
00 828 – 00 834 – 00 87800 858 – 00 864 – 00 884
VLC
O00
30
70
108
17
40
1721
42115 5514
0
2170 17
72 1727
175
5555
27100 17
245
6060
66 9021
140
55
72 8827
175 45
45
100 7027
245
6060
30
30
44
44
62
62
73.5
73.5
55
85
118
75
126
70
186
106
250
221
23
Ø 66Ø 83 82
82
00 820 – 00 850
4175
1107537
==68
68
108
108
108
108
108158
115
165
140
224
221
318
245
Drilling sheets and internal dimensions
10/34 ABB SACE
10
Overall dimensionsIP 65 junction boxes in polycarbonate
13790
220
204165
220
274
220
235
12 804 12 808 12 812
12 814 12 816 12 818
370
274235
570
570
379340
12 804 – 12 808 – 12 812 12 814 12 816 – 12 818
140
210
220
140
310
370
140
510
274235
570
IP65 IP65
IP65IP65
IP65
IP65
Front view
VLC
O00
31
56 56 56
Side view
10/35ABB SACE
10
Overall dimensionsIP 65 junction boxes in polycarbonate
12 804 12 808 12 812
12 814 12 816 12 818
Drilling sheet
68
VLC
O00
32
6890 90
94
170
90 170
164210140
60104 184
164
240
210
184 184
440
164210
269
440
285
289
10/36 ABB SACE
10
Overall dimensionsIP 40 equipment and empty enclosures
34
00 541 00 542 00 546
00 641 00 642 00 643 00 644 00 646
00 541 – 00 54200 543 – 00 54400 546 – 00 64100 642 – 00 64300 644 – 00 646
00 54400 543
80
65
80
65
80
104
80
130
80
195
80
65
80
6580
104
80
130
80
195
80
5521
VLC
O00
33
00 546 – 00 646
28 37 28 37 28
46
00 544 – 00 644
46
28 2837
46
67
00 543 – 00 643
N.B.: IP 40: 00 500 – 00 501 – 00 502 – 00 503 – 00 504 – 00505 – 00 510 – 00 511 – 00512 – 00 513codes are composed of Vimar wiring accessories installed in 1/2 compartment empty enclosures.
00 541 – 00 54200 641 – 00 642
46
28
Side view
Front view
Drilling sheets
10/37ABB SACE
10
Overall dimensionsIP 55 equipment and empty enclosures
00 551 00 552
00 651 00 652
00 551 – 00 55200 553 – 00 55400 651 – 00 65200 654 – 00 656
00 551 – 00 55200 651 – 00 652
00 55400 553
VLC
O00
34
80
65
80
65
80
104 130
80
80
65
80
65
00 656
28 37 28 37 28
46
00 554 – 00 654
46
28 2837
46
67
00 553
00 654 00 656
80
130
80
195
28
120°
6234
80
46
28
N.B.: gli apparecchi IP 55: 00 520 – 00 521 – 00 522 – 00 523 – 00 524 – 00525 – 00 530 – 00 531 – 00532 – 00 533codes are composed of Vimar wiring accessories installed in 1/2 compartment empty enclosures.
Side view
Front view
Drilling sheets
10/38 ABB SACE
10
Overall dimensionsVarious components
00 578 – 00 579
75
25
00 562 – 00 564 00 770 – 00 771 00 580 – 00 581
50
VLC
O00
35
00 562 – 00 564
67
67
75
00 770 – 00 771
65
90 80
00 570 – 00 57200 573
65
8090
00 580
65
8090
00 581
90 80
130
00 578 – 00 579
72
65
40
7
80
83
55
21
40
12
80
55
21
00 583
00 570 – 00 57200 573
80
43
77
00 58363
72
37
75
105
Side view
Front view
10/39ABB SACE
10
Overall dimensionsVarious components
Cable glands PG Metric glands clamp Metric nut
Cable clamps
VLC
O00
36
00 562 – 00 564
39
00 770 – 00 77100 580
28
46
00 570 – 00 57200 573
28
46
50
00 581
2828 37
46
B
P
H
00 578 – 00 57900 583
74 37
65
106
75
51
Ø
00 90800 91000 912
20
25
32
Øcode
Pg 9
Pg 11
Pg 13.5
Pg 16
Pg 21
Pg 29
Pg 36
Pg 42
00 93100 93200 93300 93400 93500 93600 93700 938
P B1 Ø A17
19
21
24
30
40
50
55
5–8
7–10
9–13
13–16
17–20
21–26
30–34
40–43
code
M12x1.5
M16x1.5
M20x1.5
M25x1.5
M32x1.5
M40x1.5
M50x1.5
M63x1.5
00 95100 95200 95300 95400 95500 95600 95700 958
P B1 Ø A15
19
25
30
36
46
55
66
3.5–7
5.5–10
7–13
10–17
12–21
19–28
27–35
34–45
code L18–22
22–27
24–30
30–41
33–44
36–45
43–52
45–55
C8
8
9.5
10
10
10
12
12
00 95100 95200 95300 95400 95500 956*00 957*00 958*
00 96100 96200 96300 96400 96500 966*00 967*00 968*
B17
22
27
32
41
50
60
75
code
M12x1.5
M16x1.5
M20x1.5
M25x1.5
M32x1.5
M40x1.5
M50x1.5
M63x1.5
P
B1
A
B2
P
A
B1
P
L
C
Drilling sheets
10/40 ABB SACE
10
Overall dimensionsEnclosures and boxes for light prefabrication
Junction box
VLC
O00
67
Wiring accessories box Ø 60 mm
4545
Wiring accessories and junctionbox Ø 60 mm
10 801code
10 802code
40
35
65
Wall light box 65x35 mm
10 805code
Wiring accessories box Ø 60 mm
10 807code
Increased junction box Ø 74 mm Wiring accessories modular box100x62 mm
10 803code
10 804code
Junction box 100x100 mm
100
100 45
10 808code
60 61
35 Ø 7451
100 40
65
60
60
10/41ABB SACE
10
Overall dimensionsEnclosures and boxes for light prefabrication
VLC
O00
68
Boxes for consumer units
Box for consumer unit with 8 modules Box for consumer units with 12 modules16
5
165 65
Front for consumer unit with 8 modules Front for consumer units with 12 modules
225
255 30
180
18027
10 821code
10 822code
10 833code
10 834code
65
205
235
10/42 ABB SACE
10
Overall dimensionsWiring accessories and junction boxes in thermoplasticmaterial
VLC
O00
37
00 050 00 051 00 052 00 053 00 054
00 050 00 051 00 05200 053
00 054
00 070
00 071 – 00 072 00 073 00 074 00 075
00 076 00 077
00 078
00 070
00 071 00 07200 073 00 074 00 075 – 00 076
00 077 – 00 078
ø68ø58
ø88ø81
142 172
180
218
315 420
498
58
10593
74
130118
58 75
80
80
112
112
124
124 15
0 180
180
180
180
402911
6858
411030
86 88
5038 13
56 60 74
407 33
80 71
5040 10
87 90 102
5040 10
115
105
100
7060 10
115
105
100
70
60 10
125
130
140
70
60 10
146
151
161
Side view
Front view
10/43ABB SACE
10
Overall dimensionsWiring accessories and junction boxes in thermoplasticmaterial
VLC
O00
38
00 050 00 051 00 052 00 053 00 052 – 00 053
00 054 00 070 00 071 – 12 072 00 072
00 074
00 075 – 00 07600 077 – 00 078
00 071
00 073
00 075 00 076 00 077
00 078
Covers Spare covers
00 055 00 056 00 059
40
For box Ø 65 For box Ø 85
Ø 9
4
Ø 7
6
For box/inter-axis 83,5
76
83.5
11300 09100 09200 09300 09400 09500 09600 09700 098
code A BA
B
110
140
170
180
220
320
425
500
110
125
125
150
182
182
182
182
70
70
90 42
90
106 131 51
75
80 40
80
100 50
100
130 50 72
106
154 72
106
162 72
132
200 300 400
480 72
162
Drilling sheets
10/44 ABB SACE
10
Overall dimensionsInstallation material
36
VLC
O00
45
Metal railsCENELEC-EN 50022 h7.5 rail CENELEC-EN 50035 rail
2000 15
32
16.5
1.5
59
3527
1.5
152000
CENELEC-EN 50022 h15 rail
12 839
code
12 840
code
12 841
code
2000
3527
1
7.5
18 03618 03818 028
A BØ tightening
min. max.550
780
360
9
9
7.5
Transparentpolyamide
Blackpolyamide18 13618 13818 128
5
5
5
140
190
102
A B
A BØ tightening
min. max.115
175
115
180
265
360
6
6
9
9
9
9
Blackpolyamide18 21018 21218 21818 22018 22218 224
5
10
5
10
15
25
20
40
20
45
70
100
A B
Polyamide cable-tiesA B
2
2
2.5
2
2.5
3
2.5
5
5
5
5
5
24
42
36
35
55
45
80
76
101
51
76
110
18 010
18 013
18 012
18 011
18 014
18 015
18 017
18 018
18 020
18 024
18 026
18 034
A BØ tightening
min. max.100
160
140
135
200
180
280
280
360
200
280
430
2.5
2.5
3.5
2.5
3.5
4.5
3.5
4.5
4.5
7.5
7.5
9
Transparentpolyamide
Blackpolyamide18 110
18 113
18 112
18 111
18 114
18 115
18 117
18 118
18 120
18 124
18 126
18 134
Supporting bracket for matal rails
CENELEC-EN 50035 rail with holesCENELEC-EN 50022 h7.5 rail with holes
3527
1
7.5
3527
1.5
15 2000 15
32
16.5
1.5
592000 2000
CENELEC-EN 50022 h15 rail with holes
12 849
code
12 850
code
12 853
code
Plastic base for wiring ducts Universal plastic connector
Universal metal connector
12 892
code
05 210
code
12 893
code
12 828
code
12 829
code
M6
35°
26 26
60 720
50
25
558
12
M4M
6
6.2
14.5
4.52
15.5
0.8
36
50
M4
14
0.8
1612
M4
1618
6.3
25
18
6.3
25
18
6.3
25
10/45ABB SACE
10
Overall dimensionsInstallation material
VLC
O00
46
Wall plugs with screws
25
30
40
50
18 405
18 406
18 408
18 410
Ø A5
6
8
10
code x25
30
40
50
18 415
18 416
18 418
18 420
Ø A3.5
4
5
6
codex
wall plugØ5
6
8
10
screw
Wall plugs with nail-screw
27
35
55
70
72
18 430
18 432
18 434
18 436
18 440
Ø A3.5
4
4
5
5
codex
wall plugØ5
6
6
8
8
nail-screw
Wall plugs
Screw support for externalcable-ties
18 280
code
Spirals Self-adhesive supports forcable-ties
5
8
11
13
18 370
18 372
18 374
18 376
Ø A3
6
10
12
Transparentpolyethylene
Self-extinguishingpolyethylene18 380
18 382
18 384
18 386
AØ
x18 250
Transparentbase
Blackbase18 251
Pincer for cable-ties
18 270
code
160
130
Pivot support for externalcable-ties
18 282
code
35
12
Ø 8
9.5
4
15
Pincer for external cable-ties
18 290
code
197
8512 7
105.3
3
9.5
14
AØ
Ø
A Ø
ØØ
A
28
5
4
6
10/46 ABB SACE
10
Overall dimensionsInstallation material
VLC
O00
47
Collar conduit holders U-bolt conduit holders
29
33
35
50
05 72005 72105 72205 723
A B C D26
28
32
42
16
20
25
32
10
12
12
14
28
35
47
56
70
05 69405 69505 69605 69705 698
A B C D29
35
47
56
70
12-16
16-25
25-32
32-40
40-50
17
17
17
17
17
B
A D
C
Strap holders
11
14
17
11
14
17
05 76005 76105 76205 76305 76405 765
A B C D18
18
18
18
18
18
6
8
11
6
8
11
2
2
2
2
2
2
E3.5
3.5
5
3.5
3.5
5
F5.5
7
7.5
5.5
7
7.5
Stainless-steel wall anchor
60
M5
Ø 1
4
18 490 – 18 492 – 17 494 – 18 496
Screws with stainless-steel wallplugs
6
8
10
10
18 486
18 487
18 488
18 489
AM50
55
60
70
code x
Snap-on conduit holders
29
33
35
50
55
05 700
05 701
05 702
05 703
05 704
Acode B C D26
28
32
42
50
16
20
25
32
40
10
12
12
14
14
A
B
C D
A
M
Wall plugs with hooks
365
Ø 7
Ø 9
18.5
18 450 – 18 452 – 18 454 – 18 456 – 18 548
Stainless-steel wall plugs withhooks
M4
Ø 8
40
18 460 – 18 461 – 18 464 – 18 465 – 18 466
18 467 – 18 470 – 18 471 – 18 472 – 18 473
40
M5
Ø 1
0
35/40
18 476 – 18 477 – 17 478 – 18 479
Stainless-steel wal plugs withhooks
D
B
AC
E
F
B
A
D
C
code codecode
code
code codecode
10/47ABB SACE
10
Overall dimensionsInstallation material
VLC
O00
48
Conduit clamps Conduit clamp collars
31
35
35
36
38
42
44
50
58
67
69
82
05 73005 73105 73205 73305 73405 73505 73605 73705 73805 73905 74005 741
Acode B C D11.5
13
14
16
17
21
24
27
27
40
42
53
10
12
13
14
16
19-20
22
15-26
32
38
40
50
14
15
15
15
15
15
16
16
16
16
16
17
E1.2
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
34
37
38
38
42
45
48
51
58
67
64
78
05 74505 74605 74705 74805 74905 75005 75105 75205 75305 75405 75505 756
Acode B C D15
18
19
19
22
26
29
32
40
45
48
55
10
12
13
14
16
19-20
22
25-26
32
38
40
50
12
12
12
12
13
13
14
14
16
16
16
16
E0.8
0.8
0.8
0.8
1.2
1.2
1.2
1.2
1.5
1.5
1.5
1.5
A6.
6
DB
C
EA
B
C
DE
M5
M6
Cable holders
C
9.5
11.5
12
12
14
15
17
20
21
22
24
27
30
37
43
05 770-05 78805 771-05 78905 772-05 79005 773-05 79105 774-05 79205 775-05 79305 776-05 79405 777-05 79505 778-05 79605 77905 78005 78105 78205 78304 784
Acode B C D18
18
18
24
24
29
29
29
29
29
35
45
45
60
60
6
6
6
7.5
8.5
9.5
10
10
11
11
12
14
15
20
25.6
4
5
6
7
8
9
10
12
13
14
16
19-20
22
25-26
32
E2
2
2
2
2
2
2
2
2
2
2
2.5
2.5
2.7
2.7
A
B
D
E
A
B
CD
Insulated cable clamps
05 95005 95105 952
code A B C19.5
24
29
18.5
24
31
13.5
16.5
20.5
D4.5
6.5
8
10/48 ABB SACE
10
Overall dimensionsAccessories
VLC
O00
49
Plug/box unions element
Unibox Series cable holder
12 530
code
Unibox Series couplingaccessory
12 556
code
Module covers
1SL2857A00 – 12 895 – 12 861
1SL2859A00 – 12 896 – 12 863 – 12 555
code
1
4
No modules
18 72
10
8.3
52
4
1 module 4 modules
Screw lead sealing accessory
12 860
code
Brackets
12 858
code
4
7
0.322.518
1.5
45
7Ø
5.25
DIN rails
A 7.5
12 85212 85412 85512 856
code A
86164224330
47
47
r12
37
25 12
223
180
4
7
23
12 15
16
A
Ø
B m
ax
13 874
13 875
13 876
code A B
18
22
30
7
7
10
Ø
23
28.5
37
Semi-flush-mounting frame
12 59012 59112 59212 59312 59412 59512 59612 59712 59812 599
code
AC
BD
A B C D
187254325325325430430430136275
270270270420622622270420548455
13720427527527538038038086225
220220220370572572220370498405
Bi-material flange
A
55
B
Ø 37Ø 29
Ø 23
8
12 600
12 601
12 602
code A B
140
216
292
146
210
285
Rigid flange
1SL0550A00
1SL0551A00
1SL0552 A00
code A B
140
216
292
146
210
285
A
55
B
8
10/49ABB SACE
10
Overall dimensionsAccessories
VLC
O00
50
12 820
12 821
12 822
Kit for MCBs connectors
code
A
B 165
260
30
A B
217
217
321
273
474
474
26
Fixed counter-doors
250
A
180
B
26
12 825
12 826
12 827
code A B
217
217
827
273
474
321
IP 65 conduit/box
ØA
B
00 420
00 421
00 422
00 423
00 424
00 425
code A B
12.5
16
20
27
34.5
44.5
Ø
15.5
20
24.5
32
39.5
49.5
Metal base plates for IP 65 box
B12 84212 84412 84512 84612 84712 848
code A B
80145215215215320
116116116266466466
Metal base plates for IP 55 water-proof box
A
B
15/10
00 90000 90200 904
code A B
120153222
149200290
A
46
46
46
48
66.5
66.5
Conduit clamps Plastic spacer Universal cutter Module covers
57
57.3
30.2
6
Insulating material base plates
B
6
12 83212 83412 83512 83612 83712 838
code A B
80147217217217322
116116116266466466
A
code
12 86812 869
3535
A
3636
B
100.5100.5
C
B
A A
C
12 894
code
Ø 3
8.5
Ø 3
.7
12 851
code
B
AC
D E
3737
37.746.649.649.9
A E
11.915.919.820.233.544
2833.438.951
56.267.4
B
4.84.95
5.55.55.5
C D
16.520.825.532.140.450.5
code
00 43000 43100 43200 43300 43400 435
10/50 ABB SACE
10
Overall dimensionsAccessories
VLC
O00
60
Terminal holders
12 538
12 539
70.560
114.5104
11
21.5
11
21.5
12 541
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
256
246
13
22
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
12 540
195
184
13
22
174.5
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44
12 542
13
349
338
22
12 543
300289
13
22
32 331 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 4242 43 44
10/51ABB SACE
10
Overall dimensionsAccessories
VLC
O00
61
Terminal bars
39
12 502
7
9
Ø 4.5M3
Ø 5.6
46
12 531
M3
7
9
Ø 4.5
12 532
7
9
98
M3Ø 4.5Ø 5.6
M3
12 533
7
9
137
M3Ø 4.5Ø 5.6
M3
12 534
7
9
150
M3Ø 4.5Ø 5.6
M3
12 535
M3
7
9
175
M3Ø 5.6 Ø 4.5
Code list
11/1ABB SACE
11
11/2 ABB SACE
Code list
Code Chapter/Page Code Chapter/Page Code Chapter/Page
11
10801 7/410802 7/410803 7/410804 7/410805 7/410807 7/410808 7/410811 7/410821 7/410822 7/410831 7/410832 7/410833 7/410834 7/410840 7/510841 7/510842 7/510843 7/510844 7/510845 7/510846 7/510847 7/510848 7/510849 7/510850 7/510851 7/500 050 7/800 051 7/800 052 7/800 053 7/800 054 7/800 055 7/900 056 7/900 059 7/900 070 7/800 071 7/800 072 7/800 073 7/800 074 7/800 075 7/800 076 7/800 077 7/800 078 7/800 090 7/900 091 7/900 092 7/900 093 7/900 094 7/900 095 7/900 096 7/900 097 7/900 098 7/900 420 6/700 421 6/700 422 6/700 423 6/700 424 6/700 425 6/700 430 6/700 431 6/700 432 6/700 433 6/700 434 6/700 435 6/700 500 6/1600 501 6/1600 502 6/1600 503 6/1600 504 6/1600 505 6/1600 510 6/1600 511 6/1600 512 6/1600 513 6/16
00 520 6/1700 521 6/1700 522 6/1700 523 6/1700 524 6/1700 525 6/1700 530 6/1700 531 6/1700 532 6/1700 533 6/1700 541 6/1600 542 6/1600 543 6/1600 544 6/1600 546 6/1600 551 6/1700 552 6/1700 553 6/1700 554 6/1700 556 6/1700 570 6/1900 572 6/1900 573 6/1900 578 6/1900 579 6/1900 580 6/1900 581 6/1900 583 6/1900 585 6/1900 587 6/1900 591 6/1900 592 6/1900 595 6/1900 596 6/1900 641 6/1600 642 6/1600 643 6/1600 644 6/1600 646 6/1600 651 6/1700 652 6/1700 654 6/1700 656 6/1700 770 6/1900 771 6/1900 800 6/400 802 6/400 808 6/400 810 6/400 816 6/400 820 6/400 821 6/400 822 6/500 824 6/500 826 6/500 828 6/500 830 6/500 832 6/500 834 6/500 846 6/400 850 6/400 851 6/400 852 6/500 854 6/500 856 6/500 858 6/500 860 6/500 862 6/500 864 6/500 872 6/500 874 6/500 876 6/500 878 6/500 880 6/5
00 882 6/500 884 6/500 900 6/700 902 6/700 904 6/700 908 6/700 910 6/700 912 6/700 931 6/600 932 6/600 933 6/600 934 6/600 935 6/600 936 6/600 937 6/600 938 6/600 941 6/600 942 6/600 943 6/600 944 6/600 945 6/600 946 6/600 947 6/600 948 6/600 951 6/600 952 6/600 953 6/600 954 6/600 955 6/600 956 6/600 957 6/600 958 6/600 961 6/600 962 6/600 963 6/600 964 6/600 965 6/600 966 6/600 967 6/600 968 6/605 210 8/305 694 8/1005 695 8/1005 696 8/1005 697 8/1005 698 8/1005 700 8/1005 701 8/1005 702 8/1005 703 8/1005 704 8/1005 720 8/1005 721 8/1005 722 8/1005 723 8/1005 727 8/1105 730 8/1105 731 8/1105 732 8/1105 733 8/1105 734 8/1105 735 8/1105 736 8/1105 737 8/1105 738 8/1105 739 8/1105 740 8/1105 741 8/1105 745 8/1105 746 8/1105 747 8/1105 748 8/1105 749 8/1105 750 8/11
11/3ABB SACE
Code list
Code Chapter/Page Code Chapter/Page Code Chapter/Page
11
05 751 8/1105 752 8/1105 753 8/1105 754 8/1105 755 8/1105 756 8/1105 760 8/1005 761 8/1005 762 8/1005 763 8/1005 764 8/1005 765 8/1005 770 8/1105 771 8/1105 772 8/1105 773 8/1105 774 8/1105 775 8/1105 776 8/1105 777 8/1105 778 8/1105 779 8/1105 780 8/1105 781 8/1105 782 8/1105 783 8/1105 784 8/1105 788 8/1105 789 8/1105 790 8/1105 791 8/1105 792 8/1105 793 8/1105 794 8/1105 795 8/1105 796 8/1105 950 8/1105 951 8/1105 952 8/1112 026 2/1812 027 2/1812 030 2/1812 031 2/1912 035 2/1912 037 2/1212 037 2/1212 038 2/1212 042 2/1212 043 2/1312 044 2/1312 046 2/1312 051 2/1512 053 2/1512 055 2/1512 058 2/1812 060 2/1512 062 2/1812 064 2/1812 066 2/1912 068 2/1912 070 2/2112 070 2/3312 071 2/21 - 2/3312 072 2/21 - 2/3312 073 2/21 - 2/3312 074 2/21 - 2/3312 075 2/21 - 2/3312 076 2/21 - 2/3312 077 2/21 - 2/3312 087 2/2112 089 2/2112 094 2/3312 096 2/3312 208 2/24
12 212 2/2412 214 2/2412 216 2/2512 217 2/2512 228 2/2412 232 2/2412 234 2/2412 236 2/2512 237 2/2512 238 2/2412 242 2/2412 244 2/2412 246 2/2512 247 2/2512 248 2/2412 252 2/2412 254 2/2412 256 2/2512 257 2/2512 258 2/2412 262 2/2412 264 2/2412 266 2/2512 267 2/2512 268 2/2412 272 2/2412 274 2/2412 276 2/2512 277 2/2512 362 2/6412 363 2/6412 364 2/6412 422 2/4212 424 2/4212 426 2/4212 428 2/3012 432 2/3012 434 2/3012 436 2/3112 437 2/3112 448 2/3012 452 2/3012 454 2/3012 456 2/3112 457 2/3112 468 2/3012 472 2/3012 474 2/3012 476 2/3112 477 2/3112 490 2/6012 490 5/912 490 6/1212 491 2/5412 491 2/6012 491 5/912 491 6/1212 492 2/1412 492 2/2012 492 2/2612 492 2/3212 492 2/5412 492 2/6012 492 2/812 492 5/1312 492 5/2112 492 5/912 492 6/1212 493 2/5412 493 2/6012 493 5/912 493 6/1212 494 2/5412 494 2/60
12 494 5/912 494 6/1212 495 2/1412 495 2/2012 495 2/2612 495 2/3212 495 2/812 497 2/3212 497 2/6012 497 5/912 497 6/1212 498 2/6012 498 5/1312 498 5/2112 501 2/2612 502 2/4312 503 2/1412 504 2/1412 504 2/2012 504 2/2612 504 2/3212 504 2/812 505 2/1412 505 2/2012 505 2/2612 505 2/3212 505 2/812 506 2/2012 506 2/812 507 2/6012 511 2/2712 511 2/912 512 2/2712 512 2/912 513 2/2712 513 2/912 514 2/2712 514 2/912 515 2/2712 515 2/912 516 2/2712 517 2/2712 518 2/2712 519 2/2712 520 2/2712 521 2/2712 521 2/912 522 2/2712 522 2/912 523 2/2712 523 2/912 524 2/2712 524 2/912 525 2/2712 525 2/912 530 2/2712 530 2/912 531 2/1412 531 2/2012 531 2/2612 531 2/5412 531 2/6012 531 2/812 531 5/1312 531 5/2112 531 5/912 531 6/1212 532 2/1412 532 2/2012 532 2/2612 532 2/5412 532 2/6012 532 2/812 532 5/13
11/4 ABB SACE
Code list
Code Chapter/Page Code Chapter/Page Code Chapter/Page
11
12 532 5/2112 532 5/912 532 6/1212 533 2/1412 533 2/2012 533 2/2612 533 2/5412 533 2/6012 533 2/812 533 5/1312 533 5/2112 533 5/912 533 6/1212 534 2/1412 534 2/2012 534 2/2612 534 2/5412 534 2/6012 534 2/812 534 5/1312 534 5/2112 534 5/912 534 6/1212 535 2/1412 535 2/2012 535 2/2612 535 2/5412 535 2/6012 535 2/812 535 5/1312 535 5/2112 535 5/912 535 6/1212 538 2/6012 538 5/912 538 6/1212 539 2/5412 539 2/6012 539 5/912 539 6/1212 540 2/1412 540 2/2012 540 2/2612 540 2/5412 540 2/6012 540 2/812 540 5/1312 540 5/2112 540 5/912 540 6/1212 541 2/1412 541 2/2012 541 2/2612 541 2/812 542 2/1412 542 2/2012 542 2/2612 542 2/812 543 2/6012 543 5/1312 543 5/2112 543 5/912 543 6/1212 550 2/2712 556 2/2712 565 2/5512 566 2/5512 567 2/5512 568 2/6112 568 5/812 569 2/6112 569 5/812 570 2/6112 570 5/8
12 571 2/6112 571 5/812 572 2/6112 572 5/812 573 2/6112 573 5/812 577 2/5512 578 2/6112 578 5/812 579 2/6112 579 5/812 580 2/6112 580 5/812 581 2/6112 581 5/812 582 2/6112 582 5/812 583 2/6112 583 5/812 584 2/6112 585 2/6112 586 2/6112 587 2/6112 590 2/3912 590 2/6112 590 5/812 590 6/1312 591 2/3912 591 2/5512 591 2/6112 591 5/812 591 6/1312 592 2/3912 592 2/5512 592 2/6112 592 5/812 592 6/1312 593 2/3912 593 2/5512 593 2/6112 593 5/1412 593 5/2012 593 5/812 593 6/1312 594 2/3912 594 2/5512 594 2/6112 594 5/1412 594 5/2012 594 5/812 594 6/1312 595 2/3912 595 2/6112 595 5/1412 595 5/2012 595 5/812 595 6/1312 596 2/6112 597 2/6112 598 5/1412 598 5/2012 599 5/1412 599 5/2012 600 2/3912 600 2/5512 600 2/6112 600 5/812 600 6/1312 601 2/3912 601 2/5512 601 2/6112 601 5/1512 601 5/2112 601 5/26
12 601 5/812 601 6/1312 602 2/3912 602 2/6112 602 5/1512 602 5/2112 602 5/2612 602 5/812 602 6/1312 644 2/4612 646 2/4612 650 2/4612 652 2/4712 654 2/4712 658 2/6412 659 2/6412 660 2/6412 684 2/4612 686 2/4612 690 2/4612 692 2/4712 696 2/4912 696 2/6512 697 2/4912 697 2/6512 698 2/4912 698 2/6512 702 2/3612 704 2/3612 708 2/3612 712 2/3612 714 2/3712 716 2/3712 718 2/3712 722 2/5212 724 2/5812 728 2/5812 732 2/5812 733 2/5812 734 2/5912 735 2/5912 736 2/5912 738 2/5912 742 2/5212 743 2/5212 744 2/5812 745 2/5212 746 2/5312 747 2/5312 748 2/5812 752 2/5812 753 2/5812 754 2/5912 755 2/5912 756 2/5912 758 2/5912 764 5/412 768 5/412 772 5/412 774 5/512 776 5/512 778 5/512 784 5/412 788 5/412 792 5/412 794 5/512 796 5/512 798 5/512 804 6/1012 808 6/1012 812 6/1012 814 6/1012 816 6/1012 818 6/10
11/5ABB SACE
Code list
Code Chapter/Page Code Chapter/Page Code Chapter/Page
11
12 820 5/612 821 5/612 822 5/612 825 5/612 826 5/612 827 5/612 828 8/312 829 8/312 832 5/612 832 6/1112 834 5/612 834 6/1112 835 5/612 835 6/1112 836 5/612 836 6/1112 837 5/612 837 6/1112 838 5/612 838 6/1112 839 8/212 840 8/212 841 8/212 842 5/612 842 6/1112 844 5/612 844 6/1112 845 5/612 845 6/1112 846 5/612 846 6/1112 847 5/612 847 6/1112 848 5/612 848 6/1112 849 8/212 850 8/212 851 5/812 852 5/612 852 6/1112 853 8/212 854 5/612 854 6/1112 855 5/612 855 6/1112 856 5/612 856 6/1112 858 2/3912 858 2/4812 858 2/5512 858 2/6112 858 3/612 858 5/1412 858 5/2012 858 5/2612 858 5/712 858 6/1112 860 2/1512 860 2/2112 860 2/3312 860 2/3912 860 2/4312 860 2/5512 860 2/912 861 2/2112 861 2/2712 861 2/3312 861 2/3912 861 2/4312 861 2/4812 861 2/5512 861 2/6112 861 2/6512 861 5/15
12 861 5/2012 861 5/712 863 2/2112 863 2/2712 863 2/3312 863 2/3912 863 2/4312 863 2/4812 863 2/5512 863 2/6112 863 2/6512 863 5/1512 863 5/2012 863 5/712 864 2/3312 865 2/4912 865 2/6512 866 2/5512 866 2/6112 866 5/1512 866 5/2112 866 5/712 867 2/2112 869 2/1512 880 2/4812 882 2/4812 884 2/4812 886 2/4812 892 8/312 893 8/312 894 5/1412 894 5/712 894 6/1312 895 2/1512 896 2/1513 140 3/513 141 3/513 143 3/413 143 3/413 144 3/413 150 3/513 151 3/513 153 3/413 153 3/413 154 3/413 160 3/513 161 3/413 164 3/513 165 3/413 170 3/413 170 3/413 171 3/413 174 3/413 174 3/413 175 3/413 180 3/413 183 3/413 186 3/613 187 3/613 188 3/613 189 3/613 190 3/613 200 5/1213 204 5/1213 205 5/1213 206 5/1213 208 5/1213 210 5/1813 215 5/1813 216 5/1813 218 5/1813 224 5/1813 226 5/1813 228 5/18
13 240 5/2013 251 5/1913 253 5/1913 255 5/1913 257 5/1913 259 5/2013 261 5/1913 263 5/1913 265 5/1913 267 5/1913 269 5/2013 271 5/2013 273 5/1913 275 5/1913 279 5/1913 281 5/1913 283 5/1913 285 5/1913 287 5/1913 291 5/2413 292 5/2413 322 5/2413 323 5/2413 324 5/2413 325 5/2413 326 5/2413 327 5/2413 328 5/2513 329 5/2513 330 5/2513 335 5/2513 350 5/2513 356 5/2513 357 5/2513 597 8/1013 874 6/713 875 6/713 876 6/718 010 8/518 011 8/518 012 8/518 013 8/518 014 8/518 015 8/518 017 8/518 018 8/518 020 8/518 024 8/518 026 8/518 028 8/518 034 8/518 036 8/518 038 8/518 060 8/518 061 8/518 062 8/518 063 8/518 064 8/518 110 8/518 111 8/518 112 8/518 113 8/518 114 8/518 115 8/518 117 8/518 118 8/518 120 8/518 124 8/518 126 8/518 128 8/518 134 8/518 136 8/518 138 8/518 160 8/5
11/6 ABB SACE
Code list
Code Chapter/Page Code Chapter/Page Code Chapter/Page
11
18 161 8/518 162 8/518 163 8/518 164 8/518 210 8/518 212 8/518 218 8/518 220 8/518 222 8/518 224 8/518 250 8/618 251 8/618 252 8/618 253 8/618 270 8/618 280 8/618 282 8/718 290 8/718 370 8/518 372 8/518 374 8/518 376 8/518 380 8/518 382 8/518 384 8/518 386 8/518 405 8/818 406 8/818 408 8/818 410 8/818 415 8/818 416 8/818 418 8/818 420 8/818 430 8/818 432 8/818 434 8/818 436 8/818 440 8/818 450 8/818 452 8/818 454 8/818 456 8/818 458 8/818 460 8/918 461 8/918 464 8/918 465 8/918 466 8/918 467 8/918 470 8/918 471 8/918 472 8/918 473 8/918 476 8/918 477 8/918 478 8/918 479 8/918 486 8/918 487 8/918 488 8/918 489 8/918 490 8/918 492 8/918 494 8/918 496 8/91SL0500A00 2/61SL0501A00 2/61SL0502A00 2/61SL0503A00 2/71SL0504A00 2/71SL0510A00 2/61SL0511A00 2/61SL0512A00 2/61SL0513A00 2/7
1SL0514A00 2/71SL0550A00 2/391SL0550A00 2/551SL0550A00 2/611SL0550A00 5/151SL0550A00 5/211SL0550A00 5/261SL0550A00 5/81SL0550A00 6/131SL0551A00 2/391SL0551A00 2/551SL0551A00 2/611SL0551A00 5/151SL0551A00 5/211SL0551A00 5/261SL0551A00 5/81SL0551A00 6/131SL0552A00 2/391SL0552A00 2/551SL0552A00 2/611SL0552A00 5/151SL0552A00 5/211SL0552A00 5/261SL0552A00 5/81SL0552A00 6/131SL2004A00 2/121SL2008A00 2/121SL2012A00 2/121SL2013A00 2/131SL2014A00 2/131SL2016A00 2/131SL2024A00 2/121SL2028A00 2/121SL2032A00 2/121SL2033A00 2/131SL2034A00 2/131SL2036A00 2/131SL2040A00 2/181SL2041A00 2/181SL2045A00 2/181SL2047A00 2/151SL2048A00 2/191SL2049A00 2/151SL2050A00 2/151SL2052A00 2/191SL2056A00 2/151SL2057A00 2/181SL2061A00 2/181SL2063A00 2/181SL2065A00 2/191SL2067A00 2/191SL2078A00 2/211SL2078A00 2/331SL2079A00 2/211SL2079A00 2/331SL2080A00 2/211SL2080A00 2/331SL2081A00 2/211SL2081A00 2/331SL2088A00 2/211SL2095A00 2/331SL2402A00 2/421SL2404A00 2/421SL2406A00 2/421SL2408A00 2/301SL2412A00 2/301SL2414A00 2/301SL2416A00 2/311SL2417A00 2/311SL2438A00 2/301SL2442A00 2/301SL2444A00 2/301SL2446A00 2/311SL2447A00 2/311SL2458A00 2/30
1SL2462A00 2/301SL2464A00 2/301SL2466A00 2/311SL2467A00 2/311SL2857A00 2/151SL2857A00 2/211SL2857A00 2/271SL2857A00 2/331SL2857A00 2/431SL2857A00 2/91SL2859A00 2/151SL2859A00 2/211SL2859A00 2/271SL2859A00 2/331SL2859A00 2/431SL2859A00 2/91SL2868A00 2/15ED0025 4/6ED0026 4/6ED2944 4/6ED2951 4/6ED2961 4/7ED2962 4/7ED2969 4/6ED2977 4/6ED2985 4/6ED2993 4/6ED3009 4/6ED3017 4/6ED3025 4/6ED3033 4/6ED3041 4/6ED3058 4/6ED3066 4/6ED3082 4/7ED3090 4/7ED3101 4/7ED3102 4/7ED3103 4/7ED3104 4/7ED3108 4/6ED3116 4/6ED3124 4/6ED3132 4/6ED3140 4/7ED3140 4/8ED3157 4/8ED3165 4/8ED3173 4/8ED3181 4/8ED3199 4/8ED3207 4/8ED3215 4/8ED3223 4/8ED3249 4/8ED3256 4/8ED3264 4/8ED3272 4/6ED3280 4/6ED3298 4/6ED3330 4/8ED3355 4/6ED3363 4/6ED3371 4/6ED3405 4/7ED3413 4/7ED3439 4/7GD1520 4/7GD4002 4/7GD6002 4/7GD8002 4/7PM1500 4/7PM2424 4/7PM2624 4/7PM2836 4/7
1SLC
0010
01D
0201
Mar
ch '0
4P
rinte
d in
Ital
y5.
000
- C
al
UNI EN ISO 9001
ABB SACE S.p.A.An ABB Group company
Enclosures and Cable SystemsViale Vicenza, 6136063 Marostica (VI) - ItalyTel.: ++39 0424 478200 - Telefax: ++39 0424 478310
http://www.abb.com
Due to possible developments of standards as well as ofmaterials, the characteristics and dimensions specified inthis document may only be considered binding afterconfirmation by ABB SACE.