technical data sheet oxidized bitumen r 85-25
DESCRIPTION
Bitumen, Blown Bitumen,Bitumen Services,Bitumen Storage,Bitumen Supplier,Cationic Emulsions,Oxidized Asphalt,Cutback Bitumens,Liquid Bitumen,Blown Asphalt,Oxidized Bitumen,Penetration Grade Bitumen,Polymer Modified Bitumen,Base Oil ,Asphalt Emulsions Suppliers,Quality Asphalt Emulsions,asphalt, bitumen, bitumen 60 70, bitumen 80 100, bitumen asphalt, bitumen buyers, bitumen coating,TRANSCRIPT
10, Bukit Batok Crescent | #04-04 The Spire | Singapore 658079. T +65 63372735 | F +65 63372734. E [email protected] | E [email protected] | W www.benzeneinternational.com Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.© 2003 Benzene International Pte Ltd .The Benzene International logotype (and any other trademarks) are trademarks of Benzene International Pte Ltd or one of its subsidiaries.
TECHNICAL DATA SHEET
OXIDIZED (BLOWN) BITUMEN R85/25
Description
Oxidized Bitumen is produced by either Continuous or Staggered Blowing Process. Heated Penetration Grade Bitumen under controlled environment is blown with air which controls the Oil Content in the Bitumen while it oxidized. The different grades for suited applications produced are designated by two numbers to indicate the mid-points of their softening point and penetration ranges. Technical Data
PROPERTY STANDARD
BITUMEN R
85/25 METHOD
Relative Density at 25 deg C, g/ml 1.00-1.06 ASTM D70
Softening Point (Ring and Ball),°C 80-90 ASTM D36
Penetration at 25 deg C, 0.1 mm 20-30 ASTM D5
Flash Point ( Cleveland open Cup), °C 200 ASTM D92
Loss on heating % by mass 0.2 ASTM D6
Ductility at 25°C cm, min 3 ASTM D113
Solubility in toluene % wt min 99 EN 12592:2000
Applications Oxidized Bitumen has a wide variety of industrial applications Roof Felts i.e., Water Proofing for Roof & Floors, Anti Rust Pipe Coating, Anti Slip Layer Compound for Piling, Sound Dampening Felts, Under Carriage Sealant and Coats in the Automotives, Electrical Cable Joint Protection (Fillers), Joint Filling Compounds, Sealants, Bituminous Marine Mastic for the Oil & Gas Industry and many more in our day to day life. Packing Steel drums, 200kg Steel Drums, 20 & 50 Kg Kraft Paper Bag, 20 & 50 Kg Poly bags. Health & Safety Contains petroleum distillate; flammable: keep away from open fire, sparks or other ignition sources; wear protective clothing, gloves and goggles. Skin –avoid repeated or prolonged contact, if occurs remove with hand cleaner that removes oil or grease, then clean with soap and water Eyes contact could cause irritation, if contact occurs flush immediately with clean water.