technical specification awms-3-13714- triple …...awms-3-13714- page 1 of 5 technical specification...
TRANSCRIPT
AWMS-3-13714- Page 1 of 5
Technical SpecificationAWMS-3-13714-
Triple Monitor Mount on 400 Post
• Supports three monitors up to 24”. Larger monitors may be compatible, refer to Monitor Size (page 2).
• Larger screens compatible when upgraded to sliders. Refer to AWM-HS Technical Specification for details.
• Monitor quick release mechanism.
• Integrated, optional 180° rotation limiter to prevent interference with desk mounted panels and dividers.
• Cable management with generous capacity guides cables discreetly down the arms and post to the work surface.
0 - 9kg (0 - 20lb)*
0 - 8kg (0 - 17.6lb)*
0 - 12kg (0 - 26.5lb)*
0 - 8kg (0 - 17.6lb)*
318mm (12.52˝)
+45° / -25°
360°
75x75 | 100x100
Monitor weight rangeA71
Flat monitorCurved monitor
A13Flat monitorCurved monitor
Vertical AdjustmentTilt angleMonitor rotationVESA mounting
FEATURES
WARRANTY
*Monitor weight should be within the weight range of all modular elements that make up the complete monitor mounting solution.
*Curved monitors, deep devices (such as all-in-one PCs) and offset VESA locations exert additional leverage that can exceed the capacity of the mount even though the monitor weight may be within the stated range. Please contact Atdec if you would like further information.
10 years limited
AWMS-3-13714- Page 2 of 5
Joint MovementMAX 360°/180°
JointMovement
360°
PanMovement
360°
MonitorRotation360°
MOVEMENT - 710 ARM
DIMENSIONS - 710 ARM ON POST
Front AttachmentSide Attachment
285mm
78mm(3.07”)
285mm
60mm(2.36”)
MAX.708.5mm(27.89”)
MIN.124mm(4.88”)
(11.22”)
(11.22”)
56mm(2.2”)
78mm(3.07”)
359mm(14.13”)
MONITOR SIZE
598mm
Maximum Monitor Width
20˚cockpitangle
(23.54˝)
568mmMaximum Monitor Width
with a nominal monitor
depth of 60mm (2.36˝)
and 20˚ cockpit angle
(22.36˝)
TILT ANGLE
45°
25°
AWMS-3-13714- Page 3 of 5
DIMENSIONS - 130 ARM ON POST
78mm
(3.07”)
56mm
(2.2”) 78mm
(3.07”)
60mm
(2.36”)
Front AttachmentSide Attachment
MOVEMENT - 130 ARM
Pan MovementMAX 360°/180°
MonitorRotation360°
DIMENSIONS - 710 ARM ON 400 POST
MIN
MAX MIN MAX RANGEHEIGHT ON 400 POST *C CLAMP INCREASES MINIMUM HEIGHT ON POST BY 26MM (1”)
230mm* (9.06”)
548mm* (21.57”)
318mm* (12.52”)
TILT ANGLE
45°
25°
AWMS-3-13714- Page 4 of 5
115mm(4.53”)
4.5mm(0.18”)
Ø4.5mm(0.18”)
115mm(4.53”)
100mm(3.94”)
75mm(2.95”)
DESK FIXING OPTIONS
FRONT VIEW SIDE VIEW
Below are the fixing options available for this solution. For more information and detailed specifications for these products please see the separate Technical Specifications available on the Atdec website.Note: Chosen desk fixing must be added to this solution code when ordering.
DIMENSIONS - VESA HEAD
DIMENSIONS - 130 ARM ON 400 POST
MIN
MAX MIN MAX RANGEHEIGHT ON 400 POST *C CLAMP INCREASES MINIMUM HEIGHT ON POST BY 26MM (1”)
110mm* (4.33”)
428mm* (16.85”)
318mm* (12.52”)
BOLT THROUGH AWM-FB
0-33mm(0-1.3”)
Worksurfacethickness
Rear edge ofworksurface
Min35mm(1.38”)
53mm(2.09”)
8mm(0.31”)
53mm(2.09”)
63mm(2.48”)
4mm(0.16”)
0-33mm(0-1.3”)
Worksurfacethickness
Rear edge ofworksurface
Min35mm(1.38”)
53mm(2.09”)
8mm(0.31”)
53mm(2.09”)
63mm(2.48”)
4mm(0.16”)
AWMS-3-13714- Page 5 of 5
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. ©20191024A
C CLAMP AWM-FC
85mm(3.35”)
45mm(1.77”)
96mm(3.78”)Rear edge of
worksurface
Top View
18-33mm(0.71-1.3”)
Worksurfacethickness
26mm(1”)
24mm(0.94”)Front View
GROMMET CLAMP AC-GC
62mm(2.44”)
18-36mm(0.71-1.42”)
Worksurfacethickness
6mm(0.24”)
112mm(4.41”)
51mm(2.00”)
Grommethole
62mm(2.44”)
18-36mm(0.71-1.42”)
Worksurfacethickness
6mm(0.24”)
112mm(4.41”)
41mm(1.61”)
Grommethole
F CLAMP AWM-FF
43mm(1.69”)
Rear edge ofworksurface
0-79mm(0-3.11”)
Worksurfacethickness
8mm(0.31”)
74mm(2.91”)
88mm(3.46”)
55mm(2.17”)
Rear edge ofworksurface
0-79mm(0-3.11”)
Worksurfacethickness
8mm(0.31”)
74mm(3.23”)
33mm(2”) 88mm
(3.46”)
55mm(2.17”)
HEAVY DUTY F CLAMP AWM-FH
Rear edge ofworksurface
82mm(3.23”)
75mm(2.95”)
43mm(1.69”)
0-68mm(0-2.68”)
Worksurfacethickness
110mm(4.33”)
112mm(4.41”)
8mm(0.31”)
Rear edge ofworksurface
82mm(3.23”)
75mm(2.95”)
33mm(1.3”)
0-68mm(0-2.68”)
Worksurfacethickness
110mm(4.65”)
112mm(4.41”)
8mm(0.31”)