technical theater
DESCRIPTION
Technical Theater. Terms, Movement, Safety, Practices. PROSCENIUM - the arch that separates the stage from the auditorium. STAGE WINGS: the spaces on either side of the stage. STAGE DIRECTIONS:. CURTAINS:. GRAND DRAPE:. TRAVELLER:. In PAC - located Center Stage and Upstage. - PowerPoint PPT PresentationTRANSCRIPT
Technical Theater
Terms, Movement, Safety, Practices
PROSCENIUM - the arch that separates the stage from the auditorium
STAGE WINGS: the spaces on either side of the stage
STAGE DIRECTIONS:
CURTAINS:
GRAND DRAPE:
TRAVELLER:
In PAC - located Center Stage and Upstage
TEASER, TORMENTOR, LEG, BORDER
APRON:
PAC apron is 10’ deep
Continental Seating:
American Seating:
CYCLORAMA - a drop (sky drop) that provides the illusion of open sky. Hung far upstage.
NOTICE:
Cross-grain direction (perpendicular to joint) on keys and corners to improve strength. Same applies to straps on cornerbraces
QuickTime™ and a decompressor
are needed to see this picture.
For a 4’ x 12’ Flat:
Rails = 4’
Stile = 12’ minus the width of the 2 rails (2 @3 1/2) = 7”…
SO… ?
QuickTime™ and a decompressor
are needed to see this picture.
For a 4’ x 12’ Flat:
Rail = 4’
Stile = 12’ minus the width of the 2 rails (2 @3 1/2) = 7”…
SO… 11’ 5”
NOTICE: keys, corners, and straps are INSET the width of the stock (3/4”) to allow butt-up
NOTICE: the two cornerbraces are on the same side - never opposite sides
QuickTime™ and a decompressor
are needed to see this picture.
Cornerblocks and keystones are secured using an 11 nail/screw pattern for cornerblocks, and a seven to 10 nail/screw pattern depending on fastener and usage.
TOOL QUIZ:
QuickTime™ and a decompressorare needed to see this picture.
WHAT IS IT CALLED?
TOOL QUIZ:
QuickTime™ and a decompressorare needed to see this picture.
WHAT IS IT CALLED?
TAPE RULE OR TAPE MEASURE
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressorare needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressorare needed to see this picture.
PUTTY KNIFE
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
BALL PEIN HAMMER
(pound metal, cut gaskets and seal rivets)
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
WOOD CHISEL
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
CLAW HAMMER
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressorare needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressorare needed to see this picture.
NAIL SET
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
PRY BAR
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
WRECKING BAR
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
SPEED SQUARE OR QUICK SQUARE
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
CARPENTERS SQUARE
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
CHALKLINE
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
I-BEAM LEVEL
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TORPEDO LEVEL
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
SPRING CLAMP
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
BAR CLAMP
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
C- CLAMP
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
ADJUSTABLE WRENCH OR CRESCENT WRENCH
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
GROOVE JOINT PLIERS OR CHANNEL LOCKS
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
TOOL QUIZ:
WHAT IS IT CALLED?
QuickTime™ and a decompressor
are needed to see this picture.
NEEDLE NOSE PLIERS OR LONG NOSE PLIERS